diff options
Diffstat (limited to 'include/asm-m68knommu/commproc.h')
| -rw-r--r-- | include/asm-m68knommu/commproc.h | 723 |
1 files changed, 723 insertions, 0 deletions
diff --git a/include/asm-m68knommu/commproc.h b/include/asm-m68knommu/commproc.h new file mode 100644 index 00000000000..e522ca8193a --- /dev/null +++ b/include/asm-m68knommu/commproc.h @@ -0,0 +1,723 @@ + +/* + * 68360 Communication Processor Module. + * Copyright (c) 2000 Michael Leslie <mleslie@lineo.com> (mc68360) after: + * Copyright (c) 1997 Dan Malek <dmalek@jlc.net> (mpc8xx) + * + * This file contains structures and information for the communication + * processor channels. Some CPM control and status is available + * through the 68360 internal memory map. See include/asm/360_immap.h for details. + * This file is not a complete map of all of the 360 QUICC's capabilities + * + * On the MBX board, EPPC-Bug loads CPM microcode into the first 512 + * bytes of the DP RAM and relocates the I2C parameter area to the + * IDMA1 space. The remaining DP RAM is available for buffer descriptors + * or other use. + */ +#ifndef __CPM_360__ +#define __CPM_360__ + +#include <linux/config.h> + +/* CPM Command register masks: */ +#define CPM_CR_RST ((ushort)0x8000) +#define CPM_CR_OPCODE ((ushort)0x0f00) +#define CPM_CR_CHAN ((ushort)0x00f0) +#define CPM_CR_FLG ((ushort)0x0001) + +/* CPM Command set (opcodes): */ +#define CPM_CR_INIT_TRX ((ushort)0x0000) +#define CPM_CR_INIT_RX ((ushort)0x0001) +#define CPM_CR_INIT_TX ((ushort)0x0002) +#define CPM_CR_HUNT_MODE ((ushort)0x0003) +#define CPM_CR_STOP_TX ((ushort)0x0004) +#define CPM_CR_GRSTOP_TX ((ushort)0x0005) +#define CPM_CR_RESTART_TX ((ushort)0x0006) +#define CPM_CR_CLOSE_RXBD ((ushort)0x0007) +#define CPM_CR_SET_GADDR ((ushort)0x0008) +#define CPM_CR_GCI_TIMEOUT ((ushort)0x0009) +#define CPM_CR_GCI_ABORT ((ushort)0x000a) +#define CPM_CR_RESET_BCS ((ushort)0x000a) + +/* CPM Channel numbers. */ +#define CPM_CR_CH_SCC1 ((ushort)0x0000) +#define CPM_CR_CH_SCC2 ((ushort)0x0004) +#define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI / Timers */ +#define CPM_CR_CH_TMR ((ushort)0x0005) +#define CPM_CR_CH_SCC3 ((ushort)0x0008) +#define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / IDMA1 */ +#define CPM_CR_CH_IDMA1 ((ushort)0x0009) +#define CPM_CR_CH_SCC4 ((ushort)0x000c) +#define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / IDMA2 */ +#define CPM_CR_CH_IDMA2 ((ushort)0x000d) + + +#define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4)) + +#if 1 /* mleslie: I dinna think we have any such restrictions on + * DP RAM aboard the 360 board - see the MC68360UM p.3-3 */ + +/* The dual ported RAM is multi-functional. Some areas can be (and are + * being) used for microcode. There is an area that can only be used + * as data ram for buffer descriptors, which is all we use right now. + * Currently the first 512 and last 256 bytes are used for microcode. + */ +/* mleslie: The uCquicc board is using no extra microcode in DPRAM */ +#define CPM_DATAONLY_BASE ((uint)0x0000) +#define CPM_DATAONLY_SIZE ((uint)0x0800) +#define CPM_DP_NOSPACE ((uint)0x7fffffff) + +#endif + + +/* Export the base address of the communication processor registers + * and dual port ram. */ +/* extern cpm360_t *cpmp; */ /* Pointer to comm processor */ +extern QUICC *pquicc; +uint m360_cpm_dpalloc(uint size); +/* void *m360_cpm_hostalloc(uint size); */ +void m360_cpm_setbrg(uint brg, uint rate); + +#if 0 /* use QUICC_BD declared in include/asm/m68360_quicc.h */ +/* Buffer descriptors used by many of the CPM protocols. */ +typedef struct cpm_buf_desc { + ushort cbd_sc; /* Status and Control */ + ushort cbd_datlen; /* Data length in buffer */ + uint cbd_bufaddr; /* Buffer address in host memory */ +} cbd_t; +#endif + + +/* rx bd status/control bits */ +#define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */ +#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor in table */ +#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */ +#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame OR control char */ + +#define BD_SC_FIRST ((ushort)0x0400) /* 1st buffer in an HDLC frame */ +#define BD_SC_ADDR ((ushort)0x0400) /* 1st byte is a multidrop address */ + +#define BD_SC_CM ((ushort)0x0200) /* Continous mode */ +#define BD_SC_ID ((ushort)0x0100) /* Received too many idles */ + +#define BD_SC_AM ((ushort)0x0080) /* Multidrop address match */ +#define BD_SC_DE ((ushort)0x0080) /* DPLL Error (HDLC) */ + +#define BD_SC_BR ((ushort)0x0020) /* Break received */ +#define BD_SC_LG ((ushort)0x0020) /* Frame length violation (HDLC) */ + +#define BD_SC_FR ((ushort)0x0010) /* Framing error */ +#define BD_SC_NO ((ushort)0x0010) /* Nonoctet aligned frame (HDLC) */ + +#define BD_SC_PR ((ushort)0x0008) /* Parity error */ +#define BD_SC_AB ((ushort)0x0008) /* Received abort Sequence (HDLC) */ + +#define BD_SC_OV ((ushort)0x0002) /* Overrun */ +#define BD_SC_CD ((ushort)0x0001) /* Carrier Detect lost */ + +/* tx bd status/control bits (as differ from rx bd) */ +#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */ +#define BD_SC_TC ((ushort)0x0400) /* Transmit CRC */ +#define BD_SC_P ((ushort)0x0100) /* xmt preamble */ +#define BD_SC_UN ((ushort)0x0002) /* Underrun */ + + + + +/* Parameter RAM offsets. */ + + + +/* In 2.4 ppc, the PROFF_S?C? are used as byte offsets into DPRAM. + * In 2.0, we use a more structured C struct map of DPRAM, and so + * instead, we need only a parameter ram `slot' */ + +#define PRSLOT_SCC1 0 +#define PRSLOT_SCC2 1 +#define PRSLOT_SCC3 2 +#define PRSLOT_SMC1 2 +#define PRSLOT_SCC4 3 +#define PRSLOT_SMC2 3 + + +/* #define PROFF_SCC1 ((uint)0x0000) */ +/* #define PROFF_SCC2 ((uint)0x0100) */ +/* #define PROFF_SCC3 ((uint)0x0200) */ +/* #define PROFF_SMC1 ((uint)0x0280) */ +/* #define PROFF_SCC4 ((uint)0x0300) */ +/* #define PROFF_SMC2 ((uint)0x0380) */ + + +/* Define enough so I can at least use the serial port as a UART. + * The MBX uses SMC1 as the host serial port. + */ +typedef struct smc_uart { + ushort smc_rbase; /* Rx Buffer descriptor base address */ + ushort smc_tbase; /* Tx Buffer descriptor base address */ + u_char smc_rfcr; /* Rx function code */ + u_char smc_tfcr; /* Tx function code */ + ushort smc_mrblr; /* Max receive buffer length */ + uint smc_rstate; /* Internal */ + uint smc_idp; /* Internal */ + ushort smc_rbptr; /* Internal */ + ushort smc_ibc; /* Internal */ + uint smc_rxtmp; /* Internal */ + uint smc_tstate; /* Internal */ + uint smc_tdp; /* Internal */ + ushort smc_tbptr; /* Internal */ + ushort smc_tbc; /* Internal */ + uint smc_txtmp; /* Internal */ + ushort smc_maxidl; /* Maximum idle characters */ + ushort smc_tmpidl; /* Temporary idle counter */ + ushort smc_brklen; /* Last received break length */ + ushort smc_brkec; /* rcv'd break condition counter */ + ushort smc_brkcr; /* xmt break count register */ + ushort smc_rmask; /* Temporary bit mask */ +} smc_uart_t; + +/* Function code bits. +*/ +#define SMC_EB ((u_char)0x10) /* Set big endian byte order */ + +/* SMC uart mode register. +*/ +#define SMCMR_REN ((ushort)0x0001) +#define SMCMR_TEN ((ushort)0x0002) +#define SMCMR_DM ((ushort)0x000c) +#define SMCMR_SM_GCI ((ushort)0x0000) +#define SMCMR_SM_UART ((ushort)0x0020) +#define SMCMR_SM_TRANS ((ushort)0x0030) +#define SMCMR_SM_MASK ((ushort)0x0030) +#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */ +#define SMCMR_REVD SMCMR_PM_EVEN +#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */ +#define SMCMR_BS SMCMR_PEN +#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */ +#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */ +#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK) + +/* SMC2 as Centronics parallel printer. It is half duplex, in that + * it can only receive or transmit. The parameter ram values for + * each direction are either unique or properly overlap, so we can + * include them in one structure. + */ +typedef struct smc_centronics { + ushort scent_rbase; + ushort scent_tbase; + u_char scent_cfcr; + u_char scent_smask; + ushort scent_mrblr; + uint scent_rstate; + uint scent_r_ptr; + ushort scent_rbptr; + ushort scent_r_cnt; + uint scent_rtemp; + uint scent_tstate; + uint scent_t_ptr; + ushort scent_tbptr; + ushort scent_t_cnt; + uint scent_ttemp; + ushort scent_max_sl; + ushort scent_sl_cnt; + ushort scent_character1; + ushort scent_character2; + ushort scent_character3; + ushort scent_character4; + ushort scent_character5; + ushort scent_character6; + ushort scent_character7; + ushort scent_character8; + ushort scent_rccm; + ushort scent_rccr; +} smc_cent_t; + +/* Centronics Status Mask Register. +*/ +#define SMC_CENT_F ((u_char)0x08) +#define SMC_CENT_PE ((u_char)0x04) +#define SMC_CENT_S ((u_char)0x02) + +/* SMC Event and Mask register. +*/ +#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */ +#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */ +#define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */ +#define SMCM_BSY ((unsigned char)0x04) +#define SMCM_TX ((unsigned char)0x02) +#define SMCM_RX ((unsigned char)0x01) + +/* Baud rate generators. +*/ +#define CPM_BRG_RST ((uint)0x00020000) +#define CPM_BRG_EN ((uint)0x00010000) +#define CPM_BRG_EXTC_INT ((uint)0x00000000) +#define CPM_BRG_EXTC_CLK2 ((uint)0x00004000) +#define CPM_BRG_EXTC_CLK6 ((uint)0x00008000) +#define CPM_BRG_ATB ((uint)0x00002000) +#define CPM_BRG_CD_MASK ((uint)0x00001ffe) +#define CPM_BRG_DIV16 ((uint)0x00000001) + +/* SCCs. +*/ +#define SCC_GSMRH_IRP ((uint)0x00040000) +#define SCC_GSMRH_GDE ((uint)0x00010000) +#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000) +#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000) +#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000) +#define SCC_GSMRH_REVD ((uint)0x00002000) +#define SCC_GSMRH_TRX ((uint)0x00001000) +#define SCC_GSMRH_TTX ((uint)0x00000800) +#define SCC_GSMRH_CDP ((uint)0x00000400) +#define SCC_GSMRH_CTSP ((uint)0x00000200) +#define SCC_GSMRH_CDS ((uint)0x00000100) +#define SCC_GSMRH_CTSS ((uint)0x00000080) +#define SCC_GSMRH_TFL ((uint)0x00000040) +#define SCC_GSMRH_RFW ((uint)0x00000020) +#define SCC_GSMRH_TXSY ((uint)0x00000010) +#define SCC_GSMRH_SYNL16 ((uint)0x0000000c) +#define SCC_GSMRH_SYNL8 ((uint)0x00000008) +#define SCC_GSMRH_SYNL4 ((uint)0x00000004) +#define SCC_GSMRH_RTSM ((uint)0x00000002) +#define SCC_GSMRH_RSYN ((uint)0x00000001) + +#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */ +#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000) +#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000) +#define SCC_GSMRL_EDGE_POS ((uint)0x20000000) +#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000) +#define SCC_GSMRL_TCI ((uint)0x10000000) +#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000) +#define SCC_GSMRL_TSNC_4 ((uint)0x08000000) +#define SCC_GSMRL_TSNC_14 ((uint)0x04000000) +#define SCC_GSMRL_TSNC_INF ((uint)0x00000000) +#define SCC_GSMRL_RINV ((uint)0x02000000) +#define SCC_GSMRL_TINV ((uint)0x01000000) +#define SCC_GSMRL_TPL_128 ((uint)0x00c00000) +#define SCC_GSMRL_TPL_64 ((uint)0x00a00000) +#define SCC_GSMRL_TPL_48 ((uint)0x00800000) +#define SCC_GSMRL_TPL_32 ((uint)0x00600000) +#define SCC_GSMRL_TPL_16 ((uint)0x00400000) +#define SCC_GSMRL_TPL_8 ((uint)0x00200000) +#define SCC_GSMRL_TPL_NONE ((uint)0x00000000) +#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000) +#define SCC_GSMRL_TPP_01 ((uint)0x00100000) +#define SCC_GSMRL_TPP_10 ((uint)0x00080000) +#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000) +#define SCC_GSMRL_TEND ((uint)0x00040000) +#define SCC_GSMRL_TDCR_32 ((uint)0x00030000) +#define SCC_GSMRL_TDCR_16 ((uint)0x00020000) +#define SCC_GSMRL_TDCR_8 ((uint)0x00010000) +#define SCC_GSMRL_TDCR_1 ((uint)0x00000000) +#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000) +#define SCC_GSMRL_RDCR_16 ((uint)0x00008000) +#define SCC_GSMRL_RDCR_8 ((uint)0x00004000) +#define SCC_GSMRL_RDCR_1 ((uint)0x00000000) +#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000) +#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000) +#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000) +#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800) +#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000) +#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600) +#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400) +#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200) +#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100) +#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000) +#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */ +#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080) +#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040) +#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000) +#define SCC_GSMRL_ENR ((uint)0x00000020) +#define SCC_GSMRL_ENT ((uint)0x00000010) +#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c) +#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009) +#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008) +#define SCC_GSMRL_MODE_V14 ((uint)0x00000007) +#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006) +#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005) +#define SCC_GSMRL_MODE_UART ((uint)0x00000004) +#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003) +#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002) +#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000) + +#define SCC_TODR_TOD ((ushort)0x8000) + +/* SCC Event and Mask register. +*/ +#define SCCM_TXE ((unsigned char)0x10) +#define SCCM_BSY ((unsigned char)0x04) +#define SCCM_TX ((unsigned char)0x02) +#define SCCM_RX ((unsigned char)0x01) + +typedef struct scc_param { + ushort scc_rbase; /* Rx Buffer descriptor base address */ + ushort scc_tbase; /* Tx Buffer descriptor base address */ + u_char scc_rfcr; /* Rx function code */ + u_char scc_tfcr; /* Tx function code */ + ushort scc_mrblr; /* Max receive buffer length */ + uint scc_rstate; /* Internal */ + uint scc_idp; /* Internal */ + ushort scc_rbptr; /* Internal */ + ushort scc_ibc; /* Internal */ + uint scc_rxtmp; /* Internal */ + uint scc_tstate; /* Internal */ + uint scc_tdp; /* Internal */ + ushort scc_tbptr; /* Internal */ + ushort scc_tbc; /* Internal */ + uint scc_txtmp; /* Internal */ + uint scc_rcrc; /* Internal */ + uint scc_tcrc; /* Internal */ +} sccp_t; + + +/* Function code bits. + */ +#define SCC_EB ((u_char)0x10) /* Set big endian byte order */ +#define SCC_FC_DMA ((u_char)0x08) /* Set SDMA */ + +/* CPM Ethernet through SCC1. + */ +typedef struct scc_enet { + sccp_t sen_genscc; + uint sen_cpres; /* Preset CRC */ + uint sen_cmask; /* Constant mask for CRC */ + uint sen_crcec; /* CRC Error counter */ + uint sen_alec; /* alignment error counter */ + uint sen_disfc; /* discard frame counter */ + ushort sen_pads; /* Tx short frame pad character */ + ushort sen_retlim; /* Retry limit threshold */ + ushort sen_retcnt; /* Retry limit counter */ + ushort sen_maxflr; /* maximum frame length register */ + ushort sen_minflr; /* minimum frame length register */ + ushort sen_maxd1; /* maximum DMA1 length */ + ushort sen_maxd2; /* maximum DMA2 length */ + ushort sen_maxd; /* Rx max DMA */ + ushort sen_dmacnt; /* Rx DMA counter */ + ushort sen_maxb; /* Max BD byte count */ + ushort sen_gaddr1; /* Group address filter */ + ushort sen_gaddr2; + ushort sen_gaddr3; + ushort sen_gaddr4; + uint sen_tbuf0data0; /* Save area 0 - current frame */ + uint sen_tbuf0data1; /* Save area 1 - current frame */ + uint sen_tbuf0rba; /* Internal */ + uint sen_tbuf0crc; /* Internal */ + ushort sen_tbuf0bcnt; /* Internal */ + ushort sen_paddrh; /* physical address (MSB) */ + ushort sen_paddrm; + ushort sen_paddrl; /* physical address (LSB) */ + ushort sen_pper; /* persistence */ + ushort sen_rfbdptr; /* Rx first BD pointer */ + ushort sen_tfbdptr; /* Tx first BD pointer */ + ushort sen_tlbdptr; /* Tx last BD pointer */ + uint sen_tbuf1data0; /* Save area 0 - current frame */ + uint sen_tbuf1data1; /* Save area 1 - current frame */ + uint sen_tbuf1rba; /* Internal */ + uint sen_tbuf1crc; /* Internal */ + ushort sen_tbuf1bcnt; /* Internal */ + ushort sen_txlen; /* Tx Frame length counter */ + ushort sen_iaddr1; /* Individual address filter */ + ushort sen_iaddr2; + ushort sen_iaddr3; + ushort sen_iaddr4; + ushort sen_boffcnt; /* Backoff counter */ + + /* NOTE: Some versions of the manual have the following items + * incorrectly documented. Below is the proper order. + */ + ushort sen_taddrh; /* temp address (MSB) */ + ushort sen_taddrm; + ushort sen_taddrl; /* temp address (LSB) */ +} scc_enet_t; + + + +#if defined (CONFIG_UCQUICC) +/* uCquicc has the following signals connected to Ethernet: + * 68360 - lxt905 + * PA0/RXD1 - rxd + * PA1/TXD1 - txd + * PA8/CLK1 - tclk + * PA9/CLK2 - rclk + * PC0/!RTS1 - t_en + * PC1/!CTS1 - col + * PC5/!CD1 - cd + */ +#define PA_ENET_RXD PA_RXD1 +#define PA_ENET_TXD PA_TXD1 +#define PA_ENET_TCLK PA_CLK1 +#define PA_ENET_RCLK PA_CLK2 +#define PC_ENET_TENA PC_RTS1 +#define PC_ENET_CLSN PC_CTS1 +#define PC_ENET_RENA PC_CD1 + +/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to + * SCC1. + */ +#define SICR_ENET_MASK ((uint)0x000000ff) +#define SICR_ENET_CLKRT ((uint)0x0000002c) + +#endif /* config_ucquicc */ + + +#ifdef MBX +/* Bits in parallel I/O port registers that have to be set/cleared + * to configure the pins for SCC1 use. The TCLK and RCLK seem unique + * to the MBX860 board. Any two of the four available clocks could be + * used, and the MPC860 cookbook manual has an example using different + * clock pins. + */ +#define PA_ENET_RXD ((ushort)0x0001) +#define PA_ENET_TXD ((ushort)0x0002) +#define PA_ENET_TCLK ((ushort)0x0200) +#define PA_ENET_RCLK ((ushort)0x0800) +#define PC_ENET_TENA ((ushort)0x0001) +#define PC_ENET_CLSN ((ushort)0x0010) +#define PC_ENET_RENA ((ushort)0x0020) + +/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to + * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero. + */ +#define SICR_ENET_MASK ((uint)0x000000ff) +#define SICR_ENET_CLKRT ((uint)0x0000003d) +#endif + +#ifdef CONFIG_RPXLITE +/* This ENET stuff is for the MPC850 with ethernet on SCC2. Some of + * this may be unique to the RPX-Lite configuration. + * Note TENA is on Port B. + */ +#define PA_ENET_RXD ((ushort)0x0004) +#define PA_ENET_TXD ((ushort)0x0008) +#define PA_ENET_TCLK ((ushort)0x0200) +#define PA_ENET_RCLK ((ushort)0x0800) +#define PB_ENET_TENA ((uint)0x00002000) +#define PC_ENET_CLSN ((ushort)0x0040) +#define PC_ENET_RENA ((ushort)0x0080) + +#define SICR_ENET_MASK ((uint)0x0000ff00) +#define SICR_ENET_CLKRT ((uint)0x00003d00) +#endif + +#ifdef CONFIG_BSEIP +/* This ENET stuff is for the MPC823 with ethernet on SCC2. + * This is unique to the BSE ip-Engine board. + */ +#define PA_ENET_RXD ((ushort)0x0004) +#define PA_ENET_TXD ((ushort)0x0008) +#define PA_ENET_TCLK ((ushort)0x0100) +#define PA_ENET_RCLK ((ushort)0x0200) +#define PB_ENET_TENA ((uint)0x00002000) +#define PC_ENET_CLSN ((ushort)0x0040) +#define PC_ENET_RENA ((ushort)0x0080) + +/* BSE uses port B and C bits for PHY control also. +*/ +#define PB_BSE_POWERUP ((uint)0x00000004) +#define PB_BSE_FDXDIS ((uint)0x00008000) +#define PC_BSE_LOOPBACK ((ushort)0x0800) + +#define SICR_ENET_MASK ((uint)0x0000ff00) +#define SICR_ENET_CLKRT ((uint)0x00002c00) +#endif + +#ifdef CONFIG_RPXCLASSIC +/* Bits in parallel I/O port registers that have to be set/cleared + * to configure the pins for SCC1 use. + */ +#define PA_ENET_RXD ((ushort)0x0001) +#define PA_ENET_TXD ((ushort)0x0002) +#define PA_ENET_TCLK ((ushort)0x0200) +#define PA_ENET_RCLK ((ushort)0x0800) +#define PB_ENET_TENA ((uint)0x00001000) +#define PC_ENET_CLSN ((ushort)0x0010) +#define PC_ENET_RENA ((ushort)0x0020) + +/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to + * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero. + */ +#define SICR_ENET_MASK ((uint)0x000000ff) +#define SICR_ENET_CLKRT ((uint)0x0000003d) +#endif + +/* SCC Event register as used by Ethernet. +*/ +#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ +#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */ +#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */ +#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */ +#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ +#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */ + +/* SCC Mode Register (PMSR) as used by Ethernet. +*/ +#define SCC_PMSR_HBC ((ushort)0x8000) /* Enable heartbeat */ +#define SCC_PMSR_FC ((ushort)0x4000) /* Force collision */ +#define SCC_PMSR_RSH ((ushort)0x2000) /* Receive short frames */ +#define SCC_PMSR_IAM ((ushort)0x1000) /* Check individual hash */ +#define SCC_PMSR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */ +#define SCC_PMSR_PRO ((ushort)0x0200) /* Promiscuous mode */ +#define SCC_PMSR_BRO ((ushort)0x0100) /* Catch broadcast pkts */ +#define SCC_PMSR_SBT ((ushort)0x0080) /* Special backoff timer */ +#define SCC_PMSR_LPB ((ushort)0x0040) /* Set Loopback mode */ +#define SCC_PMSR_SIP ((ushort)0x0020) /* Sample Input Pins */ +#define SCC_PMSR_LCW ((ushort)0x0010) /* Late collision window */ +#define SCC_PMSR_NIB22 ((ushort)0x000a) /* Start frame search */ +#define SCC_PMSR_FDE ((ushort)0x0001) /* Full duplex enable */ + +/* Buffer descriptor control/status used by Ethernet receive. +*/ +#define BD_ENET_RX_EMPTY ((ushort)0x8000) +#define BD_ENET_RX_WRAP ((ushort)0x2000) +#define BD_ENET_RX_INTR ((ushort)0x1000) +#define BD_ENET_RX_LAST ((ushort)0x0800) +#define BD_ENET_RX_FIRST ((ushort)0x0400) +#define BD_ENET_RX_MISS ((ushort)0x0100) +#define BD_ENET_RX_LG ((ushort)0x0020) +#define BD_ENET_RX_NO ((ushort)0x0010) +#define BD_ENET_RX_SH ((ushort)0x0008) +#define BD_ENET_RX_CR ((ushort)0x0004) +#define BD_ENET_RX_OV ((ushort)0x0002) +#define BD_ENET_RX_CL ((ushort)0x0001) +#define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */ + +/* Buffer descriptor control/status used by Ethernet transmit. +*/ +#define BD_ENET_TX_READY ((ushort)0x8000) +#define BD_ENET_TX_PAD ((ushort)0x4000) +#define BD_ENET_TX_WRAP ((ushort)0x2000) +#define BD_ENET_TX_INTR ((ushort)0x1000) +#define BD_ENET_TX_LAST ((ushort)0x0800) +#define BD_ENET_TX_TC ((ushort)0x0400) +#define BD_ENET_TX_DEF ((ushort)0x0200) +#define BD_ENET_TX_HB ((ushort)0x0100) +#define BD_ENET_TX_LC ((ushort)0x0080) +#define BD_ENET_TX_RL ((ushort)0x0040) +#define BD_ENET_TX_RCMASK ((ushort)0x003c) +#define BD_ENET_TX_UN ((ushort)0x0002) +#define BD_ENET_TX_CSL ((ushort)0x0001) +#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */ + +/* SCC as UART +*/ +typedef struct scc_uart { + sccp_t scc_genscc; + uint scc_res1; /* Reserved */ + uint scc_res2; /* Reserved */ + ushort scc_maxidl; /* Maximum idle chars */ + ushort scc_idlc; /* temp idle counter */ + ushort scc_brkcr; /* Break count register */ + ushort scc_parec; /* receive parity error counter */ + ushort scc_frmec; /* receive framing error counter */ + ushort scc_nosec; /* receive noise counter */ + ushort scc_brkec; /* receive break condition counter */ + ushort scc_brkln; /* last received break length */ + ushort scc_uaddr1; /* UART address character 1 */ + ushort scc_uaddr2; /* UART address character 2 */ + ushort scc_rtemp; /* Temp storage */ + ushort scc_toseq; /* Transmit out of sequence char */ + ushort scc_char1; /* control character 1 */ + ushort scc_char2; /* control character 2 */ + ushort scc_char3; /* control character 3 */ + ushort scc_char4; /* control character 4 */ + ushort scc_char5; /* control character 5 */ + ushort scc_char6; /* control character 6 */ + ushort scc_char7; /* control character 7 */ + ushort scc_char8; /* control character 8 */ + ushort scc_rccm; /* receive control character mask */ + ushort scc_rccr; /* receive control character register */ + ushort scc_rlbc; /* receive last break character */ +} scc_uart_t; + +/* SCC Event and Mask registers when it is used as a UART. +*/ +#define UART_SCCM_GLR ((ushort)0x1000) +#define UART_SCCM_GLT ((ushort)0x0800) +#define UART_SCCM_AB ((ushort)0x0200) +#define UART_SCCM_IDL ((ushort)0x0100) +#define UART_SCCM_GRA ((ushort)0x0080) +#define UART_SCCM_BRKE ((ushort)0x0040) +#define UART_SCCM_BRKS ((ushort)0x0020) +#define UART_SCCM_CCR ((ushort)0x0008) +#define UART_SCCM_BSY ((ushort)0x0004) +#define UART_SCCM_TX ((ushort)0x0002) +#define UART_SCCM_RX ((ushort)0x0001) + +/* The SCC PMSR when used as a UART. +*/ +#define SCU_PMSR_FLC ((ushort)0x8000) +#define SCU_PMSR_SL ((ushort)0x4000) +#define SCU_PMSR_CL ((ushort)0x3000) +#define SCU_PMSR_UM ((ushort)0x0c00) +#define SCU_PMSR_FRZ ((ushort)0x0200) +#define SCU_PMSR_RZS ((ushort)0x0100) +#define SCU_PMSR_SYN ((ushort)0x0080) +#define SCU_PMSR_DRT ((ushort)0x0040) +#define SCU_PMSR_PEN ((ushort)0x0010) +#define SCU_PMSR_RPM ((ushort)0x000c) +#define SCU_PMSR_REVP ((ushort)0x0008) +#define SCU_PMSR_TPM ((ushort)0x0003) +#define SCU_PMSR_TEVP ((ushort)0x0003) + +/* CPM Transparent mode SCC. + */ +typedef struct scc_trans { + sccp_t st_genscc; + uint st_cpres; /* Preset CRC */ + uint st_cmask; /* Constant mask for CRC */ +} scc_trans_t; + +#define BD_SCC_TX_LAST ((ushort)0x0800) + + + +/* CPM interrupts. There are nearly 32 interrupts generated by CPM + * channels or devices. All of these are presented to the PPC core + * as a single interrupt. The CPM interrupt handler dispatches its + * own handlers, in a similar fashion to the PPC core handler. We + * use the table as defined in the manuals (i.e. no special high + * priority and SCC1 == SCCa, etc...). + */ +/* #define CPMVEC_NR 32 */ +/* #define CPMVEC_PIO_PC15 ((ushort)0x1f) */ +/* #define CPMVEC_SCC1 ((ushort)0x1e) */ +/* #define CPMVEC_SCC2 ((ushort)0x1d) */ +/* #define CPMVEC_SCC3 ((ushort)0x1c) */ +/* #define CPMVEC_SCC4 ((ushort)0x1b) */ +/* #define CPMVEC_PIO_PC14 ((ushort)0x1a) */ +/* #define CPMVEC_TIMER1 ((ushort)0x19) */ +/* #define CPMVEC_PIO_PC13 ((ushort)0x18) */ +/* #define CPMVEC_PIO_PC12 ((ushort)0x17) */ +/* #define CPMVEC_SDMA_CB_ERR ((ushort)0x16) */ +/* #define CPMVEC_IDMA1 ((ushort)0x15) */ +/* #define CPMVEC_IDMA2 ((ushort)0x14) */ +/* #define CPMVEC_TIMER2 ((ushort)0x12) */ +/* #define CPMVEC_RISCTIMER ((ushort)0x11) */ +/* #define CPMVEC_I2C ((ushort)0x10) */ +/* #define CPMVEC_PIO_PC11 ((ushort)0x0f) */ +/* #define CPMVEC_PIO_PC10 ((ushort)0x0e) */ +/* #define CPMVEC_TIMER3 ((ushort)0x0c) */ +/* #define CPMVEC_PIO_PC9 ((ushort)0x0b) */ +/* #define CPMVEC_PIO_PC8 ((ushort)0x0a) */ +/* #define CPMVEC_PIO_PC7 ((ushort)0x09) */ +/* #define CPMVEC_TIMER4 ((ushort)0x07) */ +/* #define CPMVEC_PIO_PC6 ((ushort)0x06) */ +/* #define CPMVEC_SPI ((ushort)0x05) */ +/* #define CPMVEC_SMC1 ((ushort)0x04) */ +/* #define CPMVEC_SMC2 ((ushort)0x03) */ +/* #define CPMVEC_PIO_PC5 ((ushort)0x02) */ +/* #define CPMVEC_PIO_PC4 ((ushort)0x01) */ +/* #define CPMVEC_ERROR ((ushort)0x00) */ + +extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id); + +/* CPM interrupt configuration vector. +*/ +#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */ +#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */ +#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */ +#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */ +#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrrupt */ +#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */ +#define CICR_IEN ((uint)0x00000080) /* Int. enable */ +#define CICR_SPS ((uint)0x00000001) /* SCC Spread */ +#endif /* __CPM_360__ */ |