diff options
Diffstat (limited to 'include/asm-mips/io.h')
| -rw-r--r-- | include/asm-mips/io.h | 53 |
1 files changed, 35 insertions, 18 deletions
diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h index d42685747e7..8c011aa61af 100644 --- a/include/asm-mips/io.h +++ b/include/asm-mips/io.h @@ -18,7 +18,6 @@ #include <linux/types.h> #include <asm/addrspace.h> -#include <asm/bug.h> #include <asm/byteorder.h> #include <asm/cpu.h> #include <asm/cpu-features.h> @@ -57,38 +56,38 @@ * variations of functions: non-prefixed ones that preserve the value * and prefixed ones that preserve byte addresses. The latters are * typically used for moving raw data between a peripheral and memory (cf. - * string I/O functions), hence the "mem_" prefix. + * string I/O functions), hence the "__mem_" prefix. */ #if defined(CONFIG_SWAP_IO_SPACE) # define ioswabb(x) (x) -# define mem_ioswabb(x) (x) +# define __mem_ioswabb(x) (x) # ifdef CONFIG_SGI_IP22 /* * IP22 seems braindead enough to swap 16bits values in hardware, but * not 32bits. Go figure... Can't tell without documentation. */ # define ioswabw(x) (x) -# define mem_ioswabw(x) le16_to_cpu(x) +# define __mem_ioswabw(x) le16_to_cpu(x) # else # define ioswabw(x) le16_to_cpu(x) -# define mem_ioswabw(x) (x) +# define __mem_ioswabw(x) (x) # endif # define ioswabl(x) le32_to_cpu(x) -# define mem_ioswabl(x) (x) +# define __mem_ioswabl(x) (x) # define ioswabq(x) le64_to_cpu(x) -# define mem_ioswabq(x) (x) +# define __mem_ioswabq(x) (x) #else # define ioswabb(x) (x) -# define mem_ioswabb(x) (x) +# define __mem_ioswabb(x) (x) # define ioswabw(x) (x) -# define mem_ioswabw(x) cpu_to_le16(x) +# define __mem_ioswabw(x) cpu_to_le16(x) # define ioswabl(x) (x) -# define mem_ioswabl(x) cpu_to_le32(x) +# define __mem_ioswabl(x) cpu_to_le32(x) # define ioswabq(x) (x) -# define mem_ioswabq(x) cpu_to_le32(x) +# define __mem_ioswabq(x) cpu_to_le32(x) #endif @@ -284,6 +283,24 @@ static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size, __ioremap_mode((offset), (size), _CACHE_UNCACHED) /* + * ioremap_cachable - map bus memory into CPU space + * @offset: bus address of the memory + * @size: size of the resource to map + * + * ioremap_nocache performs a platform specific sequence of operations to + * make bus memory CPU accessible via the readb/readw/readl/writeb/ + * writew/writel functions and the other mmio helpers. The returned + * address is not guaranteed to be usable directly as a virtual + * address. + * + * This version of ioremap ensures that the memory is marked cachable by + * the CPU. Also enables full write-combining. Useful for some + * memory-like regions on I/O busses. + */ +#define ioremap_cachable(offset, size) \ + __ioremap_mode((offset), (size), PAGE_CACHABLE_DEFAULT) + +/* * These two are MIPS specific ioremap variant. ioremap_cacheable_cow * requests a cachable mapping, ioremap_uncached_accelerated requests a * mapping using the uncached accelerated mode which isn't supported on @@ -343,7 +360,7 @@ static inline void pfx##write##bwlq(type val, \ BUG(); \ } \ \ -static inline type pfx##read##bwlq(volatile void __iomem *mem) \ +static inline type pfx##read##bwlq(const volatile void __iomem *mem) \ { \ volatile type *__mem; \ type __val; \ @@ -418,7 +435,7 @@ __BUILD_MEMORY_SINGLE(bus, bwlq, type, 1) \ __BUILD_MEMORY_PFX(__raw_, bwlq, type) \ __BUILD_MEMORY_PFX(, bwlq, type) \ -__BUILD_MEMORY_PFX(mem_, bwlq, type) \ +__BUILD_MEMORY_PFX(__mem_, bwlq, type) \ BUILDIO_MEM(b, u8) BUILDIO_MEM(w, u16) @@ -431,7 +448,7 @@ BUILDIO_MEM(q, u64) #define BUILDIO_IOPORT(bwlq, type) \ __BUILD_IOPORT_PFX(, bwlq, type) \ - __BUILD_IOPORT_PFX(mem_, bwlq, type) + __BUILD_IOPORT_PFX(__mem_, bwlq, type) BUILDIO_IOPORT(b, u8) BUILDIO_IOPORT(w, u16) @@ -465,7 +482,7 @@ static inline void writes##bwlq(volatile void __iomem *mem, \ const volatile type *__addr = addr; \ \ while (count--) { \ - mem_write##bwlq(*__addr, mem); \ + __mem_write##bwlq(*__addr, mem); \ __addr++; \ } \ } \ @@ -476,7 +493,7 @@ static inline void reads##bwlq(volatile void __iomem *mem, void *addr, \ volatile type *__addr = addr; \ \ while (count--) { \ - *__addr = mem_read##bwlq(mem); \ + *__addr = __mem_read##bwlq(mem); \ __addr++; \ } \ } @@ -489,7 +506,7 @@ static inline void outs##bwlq(unsigned long port, const void *addr, \ const volatile type *__addr = addr; \ \ while (count--) { \ - mem_out##bwlq(*__addr, port); \ + __mem_out##bwlq(*__addr, port); \ __addr++; \ } \ } \ @@ -500,7 +517,7 @@ static inline void ins##bwlq(unsigned long port, void *addr, \ volatile type *__addr = addr; \ \ while (count--) { \ - *__addr = mem_in##bwlq(port); \ + *__addr = __mem_in##bwlq(port); \ __addr++; \ } \ } |