summaryrefslogtreecommitdiffstats
path: root/include/asm-mips/io.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-mips/io.h')
-rw-r--r--include/asm-mips/io.h589
1 files changed, 0 insertions, 589 deletions
diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h
deleted file mode 100644
index 501a40b9f18..00000000000
--- a/include/asm-mips/io.h
+++ /dev/null
@@ -1,589 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1994, 1995 Waldorf GmbH
- * Copyright (C) 1994 - 2000, 06 Ralf Baechle
- * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
- * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved.
- * Author: Maciej W. Rozycki <macro@mips.com>
- */
-#ifndef _ASM_IO_H
-#define _ASM_IO_H
-
-#include <linux/compiler.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-#include <asm/addrspace.h>
-#include <asm/byteorder.h>
-#include <asm/cpu.h>
-#include <asm/cpu-features.h>
-#include <asm-generic/iomap.h>
-#include <asm/page.h>
-#include <asm/pgtable-bits.h>
-#include <asm/processor.h>
-#include <asm/string.h>
-
-#include <ioremap.h>
-#include <mangle-port.h>
-
-/*
- * Slowdown I/O port space accesses for antique hardware.
- */
-#undef CONF_SLOWDOWN_IO
-
-/*
- * Raw operations are never swapped in software. OTOH values that raw
- * operations are working on may or may not have been swapped by the bus
- * hardware. An example use would be for flash memory that's used for
- * execute in place.
- */
-# define __raw_ioswabb(a, x) (x)
-# define __raw_ioswabw(a, x) (x)
-# define __raw_ioswabl(a, x) (x)
-# define __raw_ioswabq(a, x) (x)
-# define ____raw_ioswabq(a, x) (x)
-
-/* ioswab[bwlq], __mem_ioswab[bwlq] are defined in mangle-port.h */
-
-#define IO_SPACE_LIMIT 0xffff
-
-/*
- * On MIPS I/O ports are memory mapped, so we access them using normal
- * load/store instructions. mips_io_port_base is the virtual address to
- * which all ports are being mapped. For sake of efficiency some code
- * assumes that this is an address that can be loaded with a single lui
- * instruction, so the lower 16 bits must be zero. Should be true on
- * on any sane architecture; generic code does not use this assumption.
- */
-extern const unsigned long mips_io_port_base;
-
-/*
- * Gcc will generate code to load the value of mips_io_port_base after each
- * function call which may be fairly wasteful in some cases. So we don't
- * play quite by the book. We tell gcc mips_io_port_base is a long variable
- * which solves the code generation issue. Now we need to violate the
- * aliasing rules a little to make initialization possible and finally we
- * will need the barrier() to fight side effects of the aliasing chat.
- * This trickery will eventually collapse under gcc's optimizer. Oh well.
- */
-static inline void set_io_port_base(unsigned long base)
-{
- * (unsigned long *) &mips_io_port_base = base;
- barrier();
-}
-
-/*
- * Thanks to James van Artsdalen for a better timing-fix than
- * the two short jumps: using outb's to a nonexistent port seems
- * to guarantee better timings even on fast machines.
- *
- * On the other hand, I'd like to be sure of a non-existent port:
- * I feel a bit unsafe about using 0x80 (should be safe, though)
- *
- * Linus
- *
- */
-
-#define __SLOW_DOWN_IO \
- __asm__ __volatile__( \
- "sb\t$0,0x80(%0)" \
- : : "r" (mips_io_port_base));
-
-#ifdef CONF_SLOWDOWN_IO
-#ifdef REALLY_SLOW_IO
-#define SLOW_DOWN_IO { __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; }
-#else
-#define SLOW_DOWN_IO __SLOW_DOWN_IO
-#endif
-#else
-#define SLOW_DOWN_IO
-#endif
-
-/*
- * virt_to_phys - map virtual addresses to physical
- * @address: address to remap
- *
- * The returned physical address is the physical (CPU) mapping for
- * the memory address given. It is only valid to use this function on
- * addresses directly mapped or allocated via kmalloc.
- *
- * This function does not give bus mappings for DMA transfers. In
- * almost all conceivable cases a device driver should not be using
- * this function
- */
-static inline unsigned long virt_to_phys(volatile const void *address)
-{
- return (unsigned long)address - PAGE_OFFSET + PHYS_OFFSET;
-}
-
-/*
- * phys_to_virt - map physical address to virtual
- * @address: address to remap
- *
- * The returned virtual address is a current CPU mapping for
- * the memory address given. It is only valid to use this function on
- * addresses that have a kernel mapping
- *
- * This function does not handle bus mappings for DMA transfers. In
- * almost all conceivable cases a device driver should not be using
- * this function
- */
-static inline void * phys_to_virt(unsigned long address)
-{
- return (void *)(address + PAGE_OFFSET - PHYS_OFFSET);
-}
-
-/*
- * ISA I/O bus memory addresses are 1:1 with the physical address.
- */
-static inline unsigned long isa_virt_to_bus(volatile void * address)
-{
- return (unsigned long)address - PAGE_OFFSET;
-}
-
-static inline void * isa_bus_to_virt(unsigned long address)
-{
- return (void *)(address + PAGE_OFFSET);
-}
-
-#define isa_page_to_bus page_to_phys
-
-/*
- * However PCI ones are not necessarily 1:1 and therefore these interfaces
- * are forbidden in portable PCI drivers.
- *
- * Allow them for x86 for legacy drivers, though.
- */
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-
-/*
- * Change "struct page" to physical address.
- */
-#define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
-
-extern void __iomem * __ioremap(phys_t offset, phys_t size, unsigned long flags);
-extern void __iounmap(const volatile void __iomem *addr);
-
-static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size,
- unsigned long flags)
-{
- void __iomem *addr = plat_ioremap(offset, size, flags);
-
- if (addr)
- return addr;
-
-#define __IS_LOW512(addr) (!((phys_t)(addr) & (phys_t) ~0x1fffffffULL))
-
- if (cpu_has_64bit_addresses) {
- u64 base = UNCAC_BASE;
-
- /*
- * R10000 supports a 2 bit uncached attribute therefore
- * UNCAC_BASE may not equal IO_BASE.
- */
- if (flags == _CACHE_UNCACHED)
- base = (u64) IO_BASE;
- return (void __iomem *) (unsigned long) (base + offset);
- } else if (__builtin_constant_p(offset) &&
- __builtin_constant_p(size) && __builtin_constant_p(flags)) {
- phys_t phys_addr, last_addr;
-
- phys_addr = fixup_bigphys_addr(offset, size);
-
- /* Don't allow wraparound or zero size. */
- last_addr = phys_addr + size - 1;
- if (!size || last_addr < phys_addr)
- return NULL;
-
- /*
- * Map uncached objects in the low 512MB of address
- * space using KSEG1.
- */
- if (__IS_LOW512(phys_addr) && __IS_LOW512(last_addr) &&
- flags == _CACHE_UNCACHED)
- return (void __iomem *)
- (unsigned long)CKSEG1ADDR(phys_addr);
- }
-
- return __ioremap(offset, size, flags);
-
-#undef __IS_LOW512
-}
-
-/*
- * ioremap - map bus memory into CPU space
- * @offset: bus address of the memory
- * @size: size of the resource to map
- *
- * ioremap performs a platform specific sequence of operations to
- * make bus memory CPU accessible via the readb/readw/readl/writeb/
- * writew/writel functions and the other mmio helpers. The returned
- * address is not guaranteed to be usable directly as a virtual
- * address.
- */
-#define ioremap(offset, size) \
- __ioremap_mode((offset), (size), _CACHE_UNCACHED)
-
-/*
- * ioremap_nocache - map bus memory into CPU space
- * @offset: bus address of the memory
- * @size: size of the resource to map
- *
- * ioremap_nocache performs a platform specific sequence of operations to
- * make bus memory CPU accessible via the readb/readw/readl/writeb/
- * writew/writel functions and the other mmio helpers. The returned
- * address is not guaranteed to be usable directly as a virtual
- * address.
- *
- * This version of ioremap ensures that the memory is marked uncachable
- * on the CPU as well as honouring existing caching rules from things like
- * the PCI bus. Note that there are other caches and buffers on many
- * busses. In paticular driver authors should read up on PCI writes
- *
- * It's useful if some control registers are in such an area and
- * write combining or read caching is not desirable:
- */
-#define ioremap_nocache(offset, size) \
- __ioremap_mode((offset), (size), _CACHE_UNCACHED)
-
-/*
- * ioremap_cachable - map bus memory into CPU space
- * @offset: bus address of the memory
- * @size: size of the resource to map
- *
- * ioremap_nocache performs a platform specific sequence of operations to
- * make bus memory CPU accessible via the readb/readw/readl/writeb/
- * writew/writel functions and the other mmio helpers. The returned
- * address is not guaranteed to be usable directly as a virtual
- * address.
- *
- * This version of ioremap ensures that the memory is marked cachable by
- * the CPU. Also enables full write-combining. Useful for some
- * memory-like regions on I/O busses.
- */
-#define ioremap_cachable(offset, size) \
- __ioremap_mode((offset), (size), _page_cachable_default)
-
-/*
- * These two are MIPS specific ioremap variant. ioremap_cacheable_cow
- * requests a cachable mapping, ioremap_uncached_accelerated requests a
- * mapping using the uncached accelerated mode which isn't supported on
- * all processors.
- */
-#define ioremap_cacheable_cow(offset, size) \
- __ioremap_mode((offset), (size), _CACHE_CACHABLE_COW)
-#define ioremap_uncached_accelerated(offset, size) \
- __ioremap_mode((offset), (size), _CACHE_UNCACHED_ACCELERATED)
-
-static inline void iounmap(const volatile void __iomem *addr)
-{
- if (plat_iounmap(addr))
- return;
-
-#define __IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == CKSEG1)
-
- if (cpu_has_64bit_addresses ||
- (__builtin_constant_p(addr) && __IS_KSEG1(addr)))
- return;
-
- __iounmap(addr);
-
-#undef __IS_KSEG1
-}
-
-#define __BUILD_MEMORY_SINGLE(pfx, bwlq, type, irq) \
- \
-static inline void pfx##write##bwlq(type val, \
- volatile void __iomem *mem) \
-{ \
- volatile type *__mem; \
- type __val; \
- \
- __mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem)); \
- \
- __val = pfx##ioswab##bwlq(__mem, val); \
- \
- if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \
- *__mem = __val; \
- else if (cpu_has_64bits) { \
- unsigned long __flags; \
- type __tmp; \
- \
- if (irq) \
- local_irq_save(__flags); \
- __asm__ __volatile__( \
- ".set mips3" "\t\t# __writeq""\n\t" \
- "dsll32 %L0, %L0, 0" "\n\t" \
- "dsrl32 %L0, %L0, 0" "\n\t" \
- "dsll32 %M0, %M0, 0" "\n\t" \
- "or %L0, %L0, %M0" "\n\t" \
- "sd %L0, %2" "\n\t" \
- ".set mips0" "\n" \
- : "=r" (__tmp) \
- : "0" (__val), "m" (*__mem)); \
- if (irq) \
- local_irq_restore(__flags); \
- } else \
- BUG(); \
-} \
- \
-static inline type pfx##read##bwlq(const volatile void __iomem *mem) \
-{ \
- volatile type *__mem; \
- type __val; \
- \
- __mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem)); \
- \
- if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \
- __val = *__mem; \
- else if (cpu_has_64bits) { \
- unsigned long __flags; \
- \
- if (irq) \
- local_irq_save(__flags); \
- __asm__ __volatile__( \
- ".set mips3" "\t\t# __readq" "\n\t" \
- "ld %L0, %1" "\n\t" \
- "dsra32 %M0, %L0, 0" "\n\t" \
- "sll %L0, %L0, 0" "\n\t" \
- ".set mips0" "\n" \
- : "=r" (__val) \
- : "m" (*__mem)); \
- if (irq) \
- local_irq_restore(__flags); \
- } else { \
- __val = 0; \
- BUG(); \
- } \
- \
- return pfx##ioswab##bwlq(__mem, __val); \
-}
-
-#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, p, slow) \
- \
-static inline void pfx##out##bwlq##p(type val, unsigned long port) \
-{ \
- volatile type *__addr; \
- type __val; \
- \
- __addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \
- \
- __val = pfx##ioswab##bwlq(__addr, val); \
- \
- /* Really, we want this to be atomic */ \
- BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
- \
- *__addr = __val; \
- slow; \
-} \
- \
-static inline type pfx##in##bwlq##p(unsigned long port) \
-{ \
- volatile type *__addr; \
- type __val; \
- \
- __addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \
- \
- BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
- \
- __val = *__addr; \
- slow; \
- \
- return pfx##ioswab##bwlq(__addr, __val); \
-}
-
-#define __BUILD_MEMORY_PFX(bus, bwlq, type) \
- \
-__BUILD_MEMORY_SINGLE(bus, bwlq, type, 1)
-
-#define BUILDIO_MEM(bwlq, type) \
- \
-__BUILD_MEMORY_PFX(__raw_, bwlq, type) \
-__BUILD_MEMORY_PFX(, bwlq, type) \
-__BUILD_MEMORY_PFX(__mem_, bwlq, type) \
-
-BUILDIO_MEM(b, u8)
-BUILDIO_MEM(w, u16)
-BUILDIO_MEM(l, u32)
-BUILDIO_MEM(q, u64)
-
-#define __BUILD_IOPORT_PFX(bus, bwlq, type) \
- __BUILD_IOPORT_SINGLE(bus, bwlq, type, ,) \
- __BUILD_IOPORT_SINGLE(bus, bwlq, type, _p, SLOW_DOWN_IO)
-
-#define BUILDIO_IOPORT(bwlq, type) \
- __BUILD_IOPORT_PFX(, bwlq, type) \
- __BUILD_IOPORT_PFX(__mem_, bwlq, type)
-
-BUILDIO_IOPORT(b, u8)
-BUILDIO_IOPORT(w, u16)
-BUILDIO_IOPORT(l, u32)
-#ifdef CONFIG_64BIT
-BUILDIO_IOPORT(q, u64)
-#endif
-
-#define __BUILDIO(bwlq, type) \
- \
-__BUILD_MEMORY_SINGLE(____raw_, bwlq, type, 0)
-
-__BUILDIO(q, u64)
-
-#define readb_relaxed readb
-#define readw_relaxed readw
-#define readl_relaxed readl
-#define readq_relaxed readq
-
-/*
- * Some code tests for these symbols
- */
-#define readq readq
-#define writeq writeq
-
-#define __BUILD_MEMORY_STRING(bwlq, type) \
- \
-static inline void writes##bwlq(volatile void __iomem *mem, \
- const void *addr, unsigned int count) \
-{ \
- const volatile type *__addr = addr; \
- \
- while (count--) { \
- __mem_write##bwlq(*__addr, mem); \
- __addr++; \
- } \
-} \
- \
-static inline void reads##bwlq(volatile void __iomem *mem, void *addr, \
- unsigned int count) \
-{ \
- volatile type *__addr = addr; \
- \
- while (count--) { \
- *__addr = __mem_read##bwlq(mem); \
- __addr++; \
- } \
-}
-
-#define __BUILD_IOPORT_STRING(bwlq, type) \
- \
-static inline void outs##bwlq(unsigned long port, const void *addr, \
- unsigned int count) \
-{ \
- const volatile type *__addr = addr; \
- \
- while (count--) { \
- __mem_out##bwlq(*__addr, port); \
- __addr++; \
- } \
-} \
- \
-static inline void ins##bwlq(unsigned long port, void *addr, \
- unsigned int count) \
-{ \
- volatile type *__addr = addr; \
- \
- while (count--) { \
- *__addr = __mem_in##bwlq(port); \
- __addr++; \
- } \
-}
-
-#define BUILDSTRING(bwlq, type) \
- \
-__BUILD_MEMORY_STRING(bwlq, type) \
-__BUILD_IOPORT_STRING(bwlq, type)
-
-BUILDSTRING(b, u8)
-BUILDSTRING(w, u16)
-BUILDSTRING(l, u32)
-#ifdef CONFIG_64BIT
-BUILDSTRING(q, u64)
-#endif
-
-
-/* Depends on MIPS II instruction set */
-#define mmiowb() asm volatile ("sync" ::: "memory")
-
-static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count)
-{
- memset((void __force *) addr, val, count);
-}
-static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count)
-{
- memcpy(dst, (void __force *) src, count);
-}
-static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count)
-{
- memcpy((void __force *) dst, src, count);
-}
-
-/*
- * The caches on some architectures aren't dma-coherent and have need to
- * handle this in software. There are three types of operations that
- * can be applied to dma buffers.
- *
- * - dma_cache_wback_inv(start, size) makes caches and coherent by
- * writing the content of the caches back to memory, if necessary.
- * The function also invalidates the affected part of the caches as
- * necessary before DMA transfers from outside to memory.
- * - dma_cache_wback(start, size) makes caches and coherent by
- * writing the content of the caches back to memory, if necessary.
- * The function also invalidates the affected part of the caches as
- * necessary before DMA transfers from outside to memory.
- * - dma_cache_inv(start, size) invalidates the affected parts of the
- * caches. Dirty lines of the caches may be written back or simply
- * be discarded. This operation is necessary before dma operations
- * to the memory.
- *
- * This API used to be exported; it now is for arch code internal use only.
- */
-#ifdef CONFIG_DMA_NONCOHERENT
-
-extern void (*_dma_cache_wback_inv)(unsigned long start, unsigned long size);
-extern void (*_dma_cache_wback)(unsigned long start, unsigned long size);
-extern void (*_dma_cache_inv)(unsigned long start, unsigned long size);
-
-#define dma_cache_wback_inv(start, size) _dma_cache_wback_inv(start, size)
-#define dma_cache_wback(start, size) _dma_cache_wback(start, size)
-#define dma_cache_inv(start, size) _dma_cache_inv(start, size)
-
-#else /* Sane hardware */
-
-#define dma_cache_wback_inv(start,size) \
- do { (void) (start); (void) (size); } while (0)
-#define dma_cache_wback(start,size) \
- do { (void) (start); (void) (size); } while (0)
-#define dma_cache_inv(start,size) \
- do { (void) (start); (void) (size); } while (0)
-
-#endif /* CONFIG_DMA_NONCOHERENT */
-
-/*
- * Read a 32-bit register that requires a 64-bit read cycle on the bus.
- * Avoid interrupt mucking, just adjust the address for 4-byte access.
- * Assume the addresses are 8-byte aligned.
- */
-#ifdef __MIPSEB__
-#define __CSR_32_ADJUST 4
-#else
-#define __CSR_32_ADJUST 0
-#endif
-
-#define csr_out32(v, a) (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST) = (v))
-#define csr_in32(a) (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST))
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p) __va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p) p
-
-#endif /* _ASM_IO_H */