diff options
Diffstat (limited to 'include/asm-mips/mach-cobalt/cobalt.h')
| -rw-r--r-- | include/asm-mips/mach-cobalt/cobalt.h | 61 |
1 files changed, 2 insertions, 59 deletions
diff --git a/include/asm-mips/mach-cobalt/cobalt.h b/include/asm-mips/mach-cobalt/cobalt.h index 9c9d2b998ca..a79e7caf3a8 100644 --- a/include/asm-mips/mach-cobalt/cobalt.h +++ b/include/asm-mips/mach-cobalt/cobalt.h @@ -12,71 +12,16 @@ #ifndef __ASM_COBALT_H #define __ASM_COBALT_H -#include <irq.h> - -/* - * i8259 legacy interrupts used on Cobalt: - * - * 8 - RTC - * 9 - PCI - * 14 - IDE0 - * 15 - IDE1 - */ -#define COBALT_QUBE_SLOT_IRQ 9 - -/* - * CPU IRQs are 16 ... 23 - */ -#define COBALT_CPU_IRQ MIPS_CPU_IRQ_BASE - -#define COBALT_GALILEO_IRQ (COBALT_CPU_IRQ + 2) -#define COBALT_RAQ_SCSI_IRQ (COBALT_CPU_IRQ + 3) -#define COBALT_ETH0_IRQ (COBALT_CPU_IRQ + 3) -#define COBALT_QUBE1_ETH0_IRQ (COBALT_CPU_IRQ + 4) -#define COBALT_ETH1_IRQ (COBALT_CPU_IRQ + 4) -#define COBALT_SERIAL_IRQ (COBALT_CPU_IRQ + 5) -#define COBALT_SCSI_IRQ (COBALT_CPU_IRQ + 5) -#define COBALT_VIA_IRQ (COBALT_CPU_IRQ + 6) /* Chained to VIA ISA bridge */ - /* - * PCI configuration space manifest constants. These are wired into - * the board layout according to the PCI spec to enable the software - * to probe the hardware configuration space in a well defined manner. - * - * The PCI_DEVSHFT() macro transforms these values into numbers - * suitable for passing as the dev parameter to the various - * pcibios_read/write_config routines. + * The Cobalt board ID information. */ -#define COBALT_PCICONF_CPU 0x06 -#define COBALT_PCICONF_ETH0 0x07 -#define COBALT_PCICONF_RAQSCSI 0x08 -#define COBALT_PCICONF_VIA 0x09 -#define COBALT_PCICONF_PCISLOT 0x0A -#define COBALT_PCICONF_ETH1 0x0C - +extern int cobalt_board_id; -/* - * The Cobalt board id information. The boards have an ID number wired - * into the VIA that is available in the high nibble of register 94. - * This register is available in the VIA configuration space through the - * interface routines qube_pcibios_read/write_config. See cobalt/pci.c - */ -#define VIA_COBALT_BRD_ID_REG 0x94 -#define VIA_COBALT_BRD_REG_to_ID(reg) ((unsigned char) (reg) >> 4) #define COBALT_BRD_ID_QUBE1 0x3 #define COBALT_BRD_ID_RAQ1 0x4 #define COBALT_BRD_ID_QUBE2 0x5 #define COBALT_BRD_ID_RAQ2 0x6 -extern int cobalt_board_id; - -#define COBALT_LED_PORT (*(volatile unsigned char *) CKSEG1ADDR(0x1c000000)) -# define COBALT_LED_BAR_LEFT (1 << 0) /* Qube */ -# define COBALT_LED_BAR_RIGHT (1 << 1) /* Qube */ -# define COBALT_LED_WEB (1 << 2) /* RaQ */ -# define COBALT_LED_POWER_OFF (1 << 3) /* RaQ */ -# define COBALT_LED_RESET 0x0f - #define COBALT_KEY_PORT ((~*(volatile unsigned int *) CKSEG1ADDR(0x1d000000) >> 24) & COBALT_KEY_MASK) # define COBALT_KEY_CLEAR (1 << 1) # define COBALT_KEY_LEFT (1 << 2) @@ -87,6 +32,4 @@ extern int cobalt_board_id; # define COBALT_KEY_SELECT (1 << 7) # define COBALT_KEY_MASK 0xfe -#define COBALT_UART ((volatile unsigned char *) CKSEG1ADDR(0x1c800000)) - #endif /* __ASM_COBALT_H */ |