diff options
Diffstat (limited to 'include/asm-mips/mipsregs.h')
-rw-r--r-- | include/asm-mips/mipsregs.h | 1018 |
1 files changed, 1018 insertions, 0 deletions
diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h new file mode 100644 index 00000000000..2197aa4ce45 --- /dev/null +++ b/include/asm-mips/mipsregs.h @@ -0,0 +1,1018 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 1995, 1996, 1997, 2000, 2001 by Ralf Baechle + * Copyright (C) 2000 Silicon Graphics, Inc. + * Modified for further R[236]000 support by Paul M. Antoine, 1996. + * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 2003 Maciej W. Rozycki + */ +#ifndef _ASM_MIPSREGS_H +#define _ASM_MIPSREGS_H + +#include <linux/config.h> +#include <linux/linkage.h> +#include <asm/hazards.h> + +/* + * The following macros are especially useful for __asm__ + * inline assembler. + */ +#ifndef __STR +#define __STR(x) #x +#endif +#ifndef STR +#define STR(x) __STR(x) +#endif + +/* + * Configure language + */ +#ifdef __ASSEMBLY__ +#define _ULCAST_ +#else +#define _ULCAST_ (unsigned long) +#endif + +/* + * Coprocessor 0 register names + */ +#define CP0_INDEX $0 +#define CP0_RANDOM $1 +#define CP0_ENTRYLO0 $2 +#define CP0_ENTRYLO1 $3 +#define CP0_CONF $3 +#define CP0_CONTEXT $4 +#define CP0_PAGEMASK $5 +#define CP0_WIRED $6 +#define CP0_INFO $7 +#define CP0_BADVADDR $8 +#define CP0_COUNT $9 +#define CP0_ENTRYHI $10 +#define CP0_COMPARE $11 +#define CP0_STATUS $12 +#define CP0_CAUSE $13 +#define CP0_EPC $14 +#define CP0_PRID $15 +#define CP0_CONFIG $16 +#define CP0_LLADDR $17 +#define CP0_WATCHLO $18 +#define CP0_WATCHHI $19 +#define CP0_XCONTEXT $20 +#define CP0_FRAMEMASK $21 +#define CP0_DIAGNOSTIC $22 +#define CP0_DEBUG $23 +#define CP0_DEPC $24 +#define CP0_PERFORMANCE $25 +#define CP0_ECC $26 +#define CP0_CACHEERR $27 +#define CP0_TAGLO $28 +#define CP0_TAGHI $29 +#define CP0_ERROREPC $30 +#define CP0_DESAVE $31 + +/* + * R4640/R4650 cp0 register names. These registers are listed + * here only for completeness; without MMU these CPUs are not useable + * by Linux. A future ELKS port might take make Linux run on them + * though ... + */ +#define CP0_IBASE $0 +#define CP0_IBOUND $1 +#define CP0_DBASE $2 +#define CP0_DBOUND $3 +#define CP0_CALG $17 +#define CP0_IWATCH $18 +#define CP0_DWATCH $19 + +/* + * Coprocessor 0 Set 1 register names + */ +#define CP0_S1_DERRADDR0 $26 +#define CP0_S1_DERRADDR1 $27 +#define CP0_S1_INTCONTROL $20 + +/* + * TX39 Series + */ +#define CP0_TX39_CACHE $7 + +/* + * Coprocessor 1 (FPU) register names + */ +#define CP1_REVISION $0 +#define CP1_STATUS $31 + +/* + * FPU Status Register Values + */ +/* + * Status Register Values + */ + +#define FPU_CSR_FLUSH 0x01000000 /* flush denormalised results to 0 */ +#define FPU_CSR_COND 0x00800000 /* $fcc0 */ +#define FPU_CSR_COND0 0x00800000 /* $fcc0 */ +#define FPU_CSR_COND1 0x02000000 /* $fcc1 */ +#define FPU_CSR_COND2 0x04000000 /* $fcc2 */ +#define FPU_CSR_COND3 0x08000000 /* $fcc3 */ +#define FPU_CSR_COND4 0x10000000 /* $fcc4 */ +#define FPU_CSR_COND5 0x20000000 /* $fcc5 */ +#define FPU_CSR_COND6 0x40000000 /* $fcc6 */ +#define FPU_CSR_COND7 0x80000000 /* $fcc7 */ + +/* + * X the exception cause indicator + * E the exception enable + * S the sticky/flag bit +*/ +#define FPU_CSR_ALL_X 0x0003f000 +#define FPU_CSR_UNI_X 0x00020000 +#define FPU_CSR_INV_X 0x00010000 +#define FPU_CSR_DIV_X 0x00008000 +#define FPU_CSR_OVF_X 0x00004000 +#define FPU_CSR_UDF_X 0x00002000 +#define FPU_CSR_INE_X 0x00001000 + +#define FPU_CSR_ALL_E 0x00000f80 +#define FPU_CSR_INV_E 0x00000800 +#define FPU_CSR_DIV_E 0x00000400 +#define FPU_CSR_OVF_E 0x00000200 +#define FPU_CSR_UDF_E 0x00000100 +#define FPU_CSR_INE_E 0x00000080 + +#define FPU_CSR_ALL_S 0x0000007c +#define FPU_CSR_INV_S 0x00000040 +#define FPU_CSR_DIV_S 0x00000020 +#define FPU_CSR_OVF_S 0x00000010 +#define FPU_CSR_UDF_S 0x00000008 +#define FPU_CSR_INE_S 0x00000004 + +/* rounding mode */ +#define FPU_CSR_RN 0x0 /* nearest */ +#define FPU_CSR_RZ 0x1 /* towards zero */ +#define FPU_CSR_RU 0x2 /* towards +Infinity */ +#define FPU_CSR_RD 0x3 /* towards -Infinity */ + + +/* + * Values for PageMask register + */ +#ifdef CONFIG_CPU_VR41XX + +/* Why doesn't stupidity hurt ... */ + +#define PM_1K 0x00000000 +#define PM_4K 0x00001800 +#define PM_16K 0x00007800 +#define PM_64K 0x0001f800 +#define PM_256K 0x0007f800 + +#else + +#define PM_4K 0x00000000 +#define PM_16K 0x00006000 +#define PM_64K 0x0001e000 +#define PM_256K 0x0007e000 +#define PM_1M 0x001fe000 +#define PM_4M 0x007fe000 +#define PM_16M 0x01ffe000 +#define PM_64M 0x07ffe000 +#define PM_256M 0x1fffe000 + +#endif + +/* + * Default page size for a given kernel configuration + */ +#ifdef CONFIG_PAGE_SIZE_4KB +#define PM_DEFAULT_MASK PM_4K +#elif defined(CONFIG_PAGE_SIZE_16KB) +#define PM_DEFAULT_MASK PM_16K +#elif defined(CONFIG_PAGE_SIZE_64KB) +#define PM_DEFAULT_MASK PM_64K +#else +#error Bad page size configuration! +#endif + + +/* + * Values used for computation of new tlb entries + */ +#define PL_4K 12 +#define PL_16K 14 +#define PL_64K 16 +#define PL_256K 18 +#define PL_1M 20 +#define PL_4M 22 +#define PL_16M 24 +#define PL_64M 26 +#define PL_256M 28 + +/* + * R4x00 interrupt enable / cause bits + */ +#define IE_SW0 (_ULCAST_(1) << 8) +#define IE_SW1 (_ULCAST_(1) << 9) +#define IE_IRQ0 (_ULCAST_(1) << 10) +#define IE_IRQ1 (_ULCAST_(1) << 11) +#define IE_IRQ2 (_ULCAST_(1) << 12) +#define IE_IRQ3 (_ULCAST_(1) << 13) +#define IE_IRQ4 (_ULCAST_(1) << 14) +#define IE_IRQ5 (_ULCAST_(1) << 15) + +/* + * R4x00 interrupt cause bits + */ +#define C_SW0 (_ULCAST_(1) << 8) +#define C_SW1 (_ULCAST_(1) << 9) +#define C_IRQ0 (_ULCAST_(1) << 10) +#define C_IRQ1 (_ULCAST_(1) << 11) +#define C_IRQ2 (_ULCAST_(1) << 12) +#define C_IRQ3 (_ULCAST_(1) << 13) +#define C_IRQ4 (_ULCAST_(1) << 14) +#define C_IRQ5 (_ULCAST_(1) << 15) + +/* + * Bitfields in the R4xx0 cp0 status register + */ +#define ST0_IE 0x00000001 +#define ST0_EXL 0x00000002 +#define ST0_ERL 0x00000004 +#define ST0_KSU 0x00000018 +# define KSU_USER 0x00000010 +# define KSU_SUPERVISOR 0x00000008 +# define KSU_KERNEL 0x00000000 +#define ST0_UX 0x00000020 +#define ST0_SX 0x00000040 +#define ST0_KX 0x00000080 +#define ST0_DE 0x00010000 +#define ST0_CE 0x00020000 + +/* + * Setting c0_status.co enables Hit_Writeback and Hit_Writeback_Invalidate + * cacheops in userspace. This bit exists only on RM7000 and RM9000 + * processors. + */ +#define ST0_CO 0x08000000 + +/* + * Bitfields in the R[23]000 cp0 status register. + */ +#define ST0_IEC 0x00000001 +#define ST0_KUC 0x00000002 +#define ST0_IEP 0x00000004 +#define ST0_KUP 0x00000008 +#define ST0_IEO 0x00000010 +#define ST0_KUO 0x00000020 +/* bits 6 & 7 are reserved on R[23]000 */ +#define ST0_ISC 0x00010000 +#define ST0_SWC 0x00020000 +#define ST0_CM 0x00080000 + +/* + * Bits specific to the R4640/R4650 + */ +#define ST0_UM (_ULCAST_(1) << 4) +#define ST0_IL (_ULCAST_(1) << 23) +#define ST0_DL (_ULCAST_(1) << 24) + +/* + * Bitfields in the TX39 family CP0 Configuration Register 3 + */ +#define TX39_CONF_ICS_SHIFT 19 +#define TX39_CONF_ICS_MASK 0x00380000 +#define TX39_CONF_ICS_1KB 0x00000000 +#define TX39_CONF_ICS_2KB 0x00080000 +#define TX39_CONF_ICS_4KB 0x00100000 +#define TX39_CONF_ICS_8KB 0x00180000 +#define TX39_CONF_ICS_16KB 0x00200000 + +#define TX39_CONF_DCS_SHIFT 16 +#define TX39_CONF_DCS_MASK 0x00070000 +#define TX39_CONF_DCS_1KB 0x00000000 +#define TX39_CONF_DCS_2KB 0x00010000 +#define TX39_CONF_DCS_4KB 0x00020000 +#define TX39_CONF_DCS_8KB 0x00030000 +#define TX39_CONF_DCS_16KB 0x00040000 + +#define TX39_CONF_CWFON 0x00004000 +#define TX39_CONF_WBON 0x00002000 +#define TX39_CONF_RF_SHIFT 10 +#define TX39_CONF_RF_MASK 0x00000c00 +#define TX39_CONF_DOZE 0x00000200 +#define TX39_CONF_HALT 0x00000100 +#define TX39_CONF_LOCK 0x00000080 +#define TX39_CONF_ICE 0x00000020 +#define TX39_CONF_DCE 0x00000010 +#define TX39_CONF_IRSIZE_SHIFT 2 +#define TX39_CONF_IRSIZE_MASK 0x0000000c +#define TX39_CONF_DRSIZE_SHIFT 0 +#define TX39_CONF_DRSIZE_MASK 0x00000003 + +/* + * Status register bits available in all MIPS CPUs. + */ +#define ST0_IM 0x0000ff00 +#define STATUSB_IP0 8 +#define STATUSF_IP0 (_ULCAST_(1) << 8) +#define STATUSB_IP1 9 +#define STATUSF_IP1 (_ULCAST_(1) << 9) +#define STATUSB_IP2 10 +#define STATUSF_IP2 (_ULCAST_(1) << 10) +#define STATUSB_IP3 11 +#define STATUSF_IP3 (_ULCAST_(1) << 11) +#define STATUSB_IP4 12 +#define STATUSF_IP4 (_ULCAST_(1) << 12) +#define STATUSB_IP5 13 +#define STATUSF_IP5 (_ULCAST_(1) << 13) +#define STATUSB_IP6 14 +#define STATUSF_IP6 (_ULCAST_(1) << 14) +#define STATUSB_IP7 15 +#define STATUSF_IP7 (_ULCAST_(1) << 15) +#define STATUSB_IP8 0 +#define STATUSF_IP8 (_ULCAST_(1) << 0) +#define STATUSB_IP9 1 +#define STATUSF_IP9 (_ULCAST_(1) << 1) +#define STATUSB_IP10 2 +#define STATUSF_IP10 (_ULCAST_(1) << 2) +#define STATUSB_IP11 3 +#define STATUSF_IP11 (_ULCAST_(1) << 3) +#define STATUSB_IP12 4 +#define STATUSF_IP12 (_ULCAST_(1) << 4) +#define STATUSB_IP13 5 +#define STATUSF_IP13 (_ULCAST_(1) << 5) +#define STATUSB_IP14 6 +#define STATUSF_IP14 (_ULCAST_(1) << 6) +#define STATUSB_IP15 7 +#define STATUSF_IP15 (_ULCAST_(1) << 7) +#define ST0_CH 0x00040000 +#define ST0_SR 0x00100000 +#define ST0_TS 0x00200000 +#define ST0_BEV 0x00400000 +#define ST0_RE 0x02000000 +#define ST0_FR 0x04000000 +#define ST0_CU 0xf0000000 +#define ST0_CU0 0x10000000 +#define ST0_CU1 0x20000000 +#define ST0_CU2 0x40000000 +#define ST0_CU3 0x80000000 +#define ST0_XX 0x80000000 /* MIPS IV naming */ + +/* + * Bitfields and bit numbers in the coprocessor 0 cause register. + * + * Refer to your MIPS R4xx0 manual, chapter 5 for explanation. + */ +#define CAUSEB_EXCCODE 2 +#define CAUSEF_EXCCODE (_ULCAST_(31) << 2) +#define CAUSEB_IP 8 +#define CAUSEF_IP (_ULCAST_(255) << 8) +#define CAUSEB_IP0 8 +#define CAUSEF_IP0 (_ULCAST_(1) << 8) +#define CAUSEB_IP1 9 +#define CAUSEF_IP1 (_ULCAST_(1) << 9) +#define CAUSEB_IP2 10 +#define CAUSEF_IP2 (_ULCAST_(1) << 10) +#define CAUSEB_IP3 11 +#define CAUSEF_IP3 (_ULCAST_(1) << 11) +#define CAUSEB_IP4 12 +#define CAUSEF_IP4 (_ULCAST_(1) << 12) +#define CAUSEB_IP5 13 +#define CAUSEF_IP5 (_ULCAST_(1) << 13) +#define CAUSEB_IP6 14 +#define CAUSEF_IP6 (_ULCAST_(1) << 14) +#define CAUSEB_IP7 15 +#define CAUSEF_IP7 (_ULCAST_(1) << 15) +#define CAUSEB_IV 23 +#define CAUSEF_IV (_ULCAST_(1) << 23) +#define CAUSEB_CE 28 +#define CAUSEF_CE (_ULCAST_(3) << 28) +#define CAUSEB_BD 31 +#define CAUSEF_BD (_ULCAST_(1) << 31) + +/* + * Bits in the coprocessor 0 config register. + */ +/* Generic bits. */ +#define CONF_CM_CACHABLE_NO_WA 0 +#define CONF_CM_CACHABLE_WA 1 +#define CONF_CM_UNCACHED 2 +#define CONF_CM_CACHABLE_NONCOHERENT 3 +#define CONF_CM_CACHABLE_CE 4 +#define CONF_CM_CACHABLE_COW 5 +#define CONF_CM_CACHABLE_CUW 6 +#define CONF_CM_CACHABLE_ACCELERATED 7 +#define CONF_CM_CMASK 7 +#define CONF_BE (_ULCAST_(1) << 15) + +/* Bits common to various processors. */ +#define CONF_CU (_ULCAST_(1) << 3) +#define CONF_DB (_ULCAST_(1) << 4) +#define CONF_IB (_ULCAST_(1) << 5) +#define CONF_DC (_ULCAST_(7) << 6) +#define CONF_IC (_ULCAST_(7) << 9) +#define CONF_EB (_ULCAST_(1) << 13) +#define CONF_EM (_ULCAST_(1) << 14) +#define CONF_SM (_ULCAST_(1) << 16) +#define CONF_SC (_ULCAST_(1) << 17) +#define CONF_EW (_ULCAST_(3) << 18) +#define CONF_EP (_ULCAST_(15)<< 24) +#define CONF_EC (_ULCAST_(7) << 28) +#define CONF_CM (_ULCAST_(1) << 31) + +/* Bits specific to the R4xx0. */ +#define R4K_CONF_SW (_ULCAST_(1) << 20) +#define R4K_CONF_SS (_ULCAST_(1) << 21) +#define R4K_CONF_SB (_ULCAST_(3) << 22) + +/* Bits specific to the R5000. */ +#define R5K_CONF_SE (_ULCAST_(1) << 12) +#define R5K_CONF_SS (_ULCAST_(3) << 20) + +/* Bits specific to the R10000. */ +#define R10K_CONF_DN (_ULCAST_(3) << 3) +#define R10K_CONF_CT (_ULCAST_(1) << 5) +#define R10K_CONF_PE (_ULCAST_(1) << 6) +#define R10K_CONF_PM (_ULCAST_(3) << 7) +#define R10K_CONF_EC (_ULCAST_(15)<< 9) +#define R10K_CONF_SB (_ULCAST_(1) << 13) +#define R10K_CONF_SK (_ULCAST_(1) << 14) +#define R10K_CONF_SS (_ULCAST_(7) << 16) +#define R10K_CONF_SC (_ULCAST_(7) << 19) +#define R10K_CONF_DC (_ULCAST_(7) << 26) +#define R10K_CONF_IC (_ULCAST_(7) << 29) + +/* Bits specific to the VR41xx. */ +#define VR41_CONF_CS (_ULCAST_(1) << 12) +#define VR41_CONF_M16 (_ULCAST_(1) << 20) +#define VR41_CONF_AD (_ULCAST_(1) << 23) + +/* Bits specific to the R30xx. */ +#define R30XX_CONF_FDM (_ULCAST_(1) << 19) +#define R30XX_CONF_REV (_ULCAST_(1) << 22) +#define R30XX_CONF_AC (_ULCAST_(1) << 23) +#define R30XX_CONF_RF (_ULCAST_(1) << 24) +#define R30XX_CONF_HALT (_ULCAST_(1) << 25) +#define R30XX_CONF_FPINT (_ULCAST_(7) << 26) +#define R30XX_CONF_DBR (_ULCAST_(1) << 29) +#define R30XX_CONF_SB (_ULCAST_(1) << 30) +#define R30XX_CONF_LOCK (_ULCAST_(1) << 31) + +/* Bits specific to the TX49. */ +#define TX49_CONF_DC (_ULCAST_(1) << 16) +#define TX49_CONF_IC (_ULCAST_(1) << 17) /* conflict with CONF_SC */ +#define TX49_CONF_HALT (_ULCAST_(1) << 18) +#define TX49_CONF_CWFON (_ULCAST_(1) << 27) + +/* Bits specific to the MIPS32/64 PRA. */ +#define MIPS_CONF_MT (_ULCAST_(7) << 7) +#define MIPS_CONF_AR (_ULCAST_(7) << 10) +#define MIPS_CONF_AT (_ULCAST_(3) << 13) +#define MIPS_CONF_M (_ULCAST_(1) << 31) + +/* + * R10000 performance counter definitions. + * + * FIXME: The R10000 performance counter opens a nice way to implement CPU + * time accounting with a precission of one cycle. I don't have + * R10000 silicon but just a manual, so ... + */ + +/* + * Events counted by counter #0 + */ +#define CE0_CYCLES 0 +#define CE0_INSN_ISSUED 1 +#define CE0_LPSC_ISSUED 2 +#define CE0_S_ISSUED 3 +#define CE0_SC_ISSUED 4 +#define CE0_SC_FAILED 5 +#define CE0_BRANCH_DECODED 6 +#define CE0_QW_WB_SECONDARY 7 +#define CE0_CORRECTED_ECC_ERRORS 8 +#define CE0_ICACHE_MISSES 9 +#define CE0_SCACHE_I_MISSES 10 +#define CE0_SCACHE_I_WAY_MISSPREDICTED 11 +#define CE0_EXT_INTERVENTIONS_REQ 12 +#define CE0_EXT_INVALIDATE_REQ 13 +#define CE0_VIRTUAL_COHERENCY_COND 14 +#define CE0_INSN_GRADUATED 15 + +/* + * Events counted by counter #1 + */ +#define CE1_CYCLES 0 +#define CE1_INSN_GRADUATED 1 +#define CE1_LPSC_GRADUATED 2 +#define CE1_S_GRADUATED 3 +#define CE1_SC_GRADUATED 4 +#define CE1_FP_INSN_GRADUATED 5 +#define CE1_QW_WB_PRIMARY 6 +#define CE1_TLB_REFILL 7 +#define CE1_BRANCH_MISSPREDICTED 8 +#define CE1_DCACHE_MISS 9 +#define CE1_SCACHE_D_MISSES 10 +#define CE1_SCACHE_D_WAY_MISSPREDICTED 11 +#define CE1_EXT_INTERVENTION_HITS 12 +#define CE1_EXT_INVALIDATE_REQ 13 +#define CE1_SP_HINT_TO_CEXCL_SC_BLOCKS 14 +#define CE1_SP_HINT_TO_SHARED_SC_BLOCKS 15 + +/* + * These flags define in which privilege mode the counters count events + */ +#define CEB_USER 8 /* Count events in user mode, EXL = ERL = 0 */ +#define CEB_SUPERVISOR 4 /* Count events in supvervisor mode EXL = ERL = 0 */ +#define CEB_KERNEL 2 /* Count events in kernel mode EXL = ERL = 0 */ +#define CEB_EXL 1 /* Count events with EXL = 1, ERL = 0 */ + +#ifndef __ASSEMBLY__ + +/* + * Functions to access the R10000 performance counters. These are basically + * mfc0 and mtc0 instructions from and to coprocessor register with a 5-bit + * performance counter number encoded into bits 1 ... 5 of the instruction. + * Only performance counters 0 to 1 actually exist, so for a non-R10000 aware + * disassembler these will look like an access to sel 0 or 1. + */ +#define read_r10k_perf_cntr(counter) \ +({ \ + unsigned int __res; \ + __asm__ __volatile__( \ + "mfpc\t%0, %1" \ + : "=r" (__res) \ + : "i" (counter)); \ + \ + __res; \ +}) + +#define write_r10k_perf_cntr(counter,val) \ +do { \ + __asm__ __volatile__( \ + "mtpc\t%0, %1" \ + : \ + : "r" (val), "i" (counter)); \ +} while (0) + +#define read_r10k_perf_event(counter) \ +({ \ + unsigned int __res; \ + __asm__ __volatile__( \ + "mfps\t%0, %1" \ + : "=r" (__res) \ + : "i" (counter)); \ + \ + __res; \ +}) + +#define write_r10k_perf_cntl(counter,val) \ +do { \ + __asm__ __volatile__( \ + "mtps\t%0, %1" \ + : \ + : "r" (val), "i" (counter)); \ +} while (0) + + +/* + * Macros to access the system control coprocessor + */ + +#define __read_32bit_c0_register(source, sel) \ +({ int __res; \ + if (sel == 0) \ + __asm__ __volatile__( \ + "mfc0\t%0, " #source "\n\t" \ + : "=r" (__res)); \ + else \ + __asm__ __volatile__( \ + ".set\tmips32\n\t" \ + "mfc0\t%0, " #source ", " #sel "\n\t" \ + ".set\tmips0\n\t" \ + : "=r" (__res)); \ + __res; \ +}) + +#define __read_64bit_c0_register(source, sel) \ +({ unsigned long long __res; \ + if (sizeof(unsigned long) == 4) \ + __res = __read_64bit_c0_split(source, sel); \ + else if (sel == 0) \ + __asm__ __volatile__( \ + ".set\tmips3\n\t" \ + "dmfc0\t%0, " #source "\n\t" \ + ".set\tmips0" \ + : "=r" (__res)); \ + else \ + __asm__ __volatile__( \ + ".set\tmips64\n\t" \ + "dmfc0\t%0, " #source ", " #sel "\n\t" \ + ".set\tmips0" \ + : "=r" (__res)); \ + __res; \ +}) + +#define __write_32bit_c0_register(register, sel, value) \ +do { \ + if (sel == 0) \ + __asm__ __volatile__( \ + "mtc0\t%z0, " #register "\n\t" \ + : : "Jr" ((unsigned int)value)); \ + else \ + __asm__ __volatile__( \ + ".set\tmips32\n\t" \ + "mtc0\t%z0, " #register ", " #sel "\n\t" \ + ".set\tmips0" \ + : : "Jr" ((unsigned int)value)); \ +} while (0) + +#define __write_64bit_c0_register(register, sel, value) \ +do { \ + if (sizeof(unsigned long) == 4) \ + __write_64bit_c0_split(register, sel, value); \ + else if (sel == 0) \ + __asm__ __volatile__( \ + ".set\tmips3\n\t" \ + "dmtc0\t%z0, " #register "\n\t" \ + ".set\tmips0" \ + : : "Jr" (value)); \ + else \ + __asm__ __volatile__( \ + ".set\tmips64\n\t" \ + "dmtc0\t%z0, " #register ", " #sel "\n\t" \ + ".set\tmips0" \ + : : "Jr" (value)); \ +} while (0) + +#define __read_ulong_c0_register(reg, sel) \ + ((sizeof(unsigned long) == 4) ? \ + (unsigned long) __read_32bit_c0_register(reg, sel) : \ + (unsigned long) __read_64bit_c0_register(reg, sel)) + +#define __write_ulong_c0_register(reg, sel, val) \ +do { \ + if (sizeof(unsigned long) == 4) \ + __write_32bit_c0_register(reg, sel, val); \ + else \ + __write_64bit_c0_register(reg, sel, val); \ +} while (0) + +/* + * On RM7000/RM9000 these are uses to access cop0 set 1 registers + */ +#define __read_32bit_c0_ctrl_register(source) \ +({ int __res; \ + __asm__ __volatile__( \ + "cfc0\t%0, " #source "\n\t" \ + : "=r" (__res)); \ + __res; \ +}) + +#define __write_32bit_c0_ctrl_register(register, value) \ +do { \ + __asm__ __volatile__( \ + "ctc0\t%z0, " #register "\n\t" \ + : : "Jr" ((unsigned int)value)); \ +} while (0) + +/* + * These versions are only needed for systems with more than 38 bits of + * physical address space running the 32-bit kernel. That's none atm :-) + */ +#define __read_64bit_c0_split(source, sel) \ +({ \ + unsigned long long val; \ + unsigned long flags; \ + \ + local_irq_save(flags); \ + if (sel == 0) \ + __asm__ __volatile__( \ + ".set\tmips64\n\t" \ + "dmfc0\t%M0, " #source "\n\t" \ + "dsll\t%L0, %M0, 32\n\t" \ + "dsrl\t%M0, %M0, 32\n\t" \ + "dsrl\t%L0, %L0, 32\n\t" \ + ".set\tmips0" \ + : "=r" (val)); \ + else \ + __asm__ __volatile__( \ + ".set\tmips64\n\t" \ + "dmfc0\t%M0, " #source ", " #sel "\n\t" \ + "dsll\t%L0, %M0, 32\n\t" \ + "dsrl\t%M0, %M0, 32\n\t" \ + "dsrl\t%L0, %L0, 32\n\t" \ + ".set\tmips0" \ + : "=r" (val)); \ + local_irq_restore(flags); \ + \ + val; \ +}) + +#define __write_64bit_c0_split(source, sel, val) \ +do { \ + unsigned long flags; \ + \ + local_irq_save(flags); \ + if (sel == 0) \ + __asm__ __volatile__( \ + ".set\tmips64\n\t" \ + "dsll\t%L0, %L0, 32\n\t" \ + "dsrl\t%L0, %L0, 32\n\t" \ + "dsll\t%M0, %M0, 32\n\t" \ + "or\t%L0, %L0, %M0\n\t" \ + "dmtc0\t%L0, " #source "\n\t" \ + ".set\tmips0" \ + : : "r" (val)); \ + else \ + __asm__ __volatile__( \ + ".set\tmips64\n\t" \ + "dsll\t%L0, %L0, 32\n\t" \ + "dsrl\t%L0, %L0, 32\n\t" \ + "dsll\t%M0, %M0, 32\n\t" \ + "or\t%L0, %L0, %M0\n\t" \ + "dmtc0\t%L0, " #source ", " #sel "\n\t" \ + ".set\tmips0" \ + : : "r" (val)); \ + local_irq_restore(flags); \ +} while (0) + +#define read_c0_index() __read_32bit_c0_register($0, 0) +#define write_c0_index(val) __write_32bit_c0_register($0, 0, val) + +#define read_c0_entrylo0() __read_ulong_c0_register($2, 0) +#define write_c0_entrylo0(val) __write_ulong_c0_register($2, 0, val) + +#define read_c0_entrylo1() __read_ulong_c0_register($3, 0) +#define write_c0_entrylo1(val) __write_ulong_c0_register($3, 0, val) + +#define read_c0_conf() __read_32bit_c0_register($3, 0) +#define write_c0_conf(val) __write_32bit_c0_register($3, 0, val) + +#define read_c0_context() __read_ulong_c0_register($4, 0) +#define write_c0_context(val) __write_ulong_c0_register($4, 0, val) + +#define read_c0_pagemask() __read_32bit_c0_register($5, 0) +#define write_c0_pagemask(val) __write_32bit_c0_register($5, 0, val) + +#define read_c0_wired() __read_32bit_c0_register($6, 0) +#define write_c0_wired(val) __write_32bit_c0_register($6, 0, val) + +#define read_c0_info() __read_32bit_c0_register($7, 0) + +#define read_c0_cache() __read_32bit_c0_register($7, 0) /* TX39xx */ +#define write_c0_cache(val) __write_32bit_c0_register($7, 0, val) + +#define read_c0_count() __read_32bit_c0_register($9, 0) +#define write_c0_count(val) __write_32bit_c0_register($9, 0, val) + +#define read_c0_entryhi() __read_ulong_c0_register($10, 0) +#define write_c0_entryhi(val) __write_ulong_c0_register($10, 0, val) + +#define read_c0_compare() __read_32bit_c0_register($11, 0) +#define write_c0_compare(val) __write_32bit_c0_register($11, 0, val) + +#define read_c0_status() __read_32bit_c0_register($12, 0) +#define write_c0_status(val) __write_32bit_c0_register($12, 0, val) + +#define read_c0_cause() __read_32bit_c0_register($13, 0) +#define write_c0_cause(val) __write_32bit_c0_register($13, 0, val) + +#define read_c0_epc() __read_ulong_c0_register($14, 0) +#define write_c0_epc(val) __write_ulong_c0_register($14, 0, val) + +#define read_c0_prid() __read_32bit_c0_register($15, 0) + +#define read_c0_config() __read_32bit_c0_register($16, 0) +#define read_c0_config1() __read_32bit_c0_register($16, 1) +#define read_c0_config2() __read_32bit_c0_register($16, 2) +#define read_c0_config3() __read_32bit_c0_register($16, 3) +#define write_c0_config(val) __write_32bit_c0_register($16, 0, val) +#define write_c0_config1(val) __write_32bit_c0_register($16, 1, val) +#define write_c0_config2(val) __write_32bit_c0_register($16, 2, val) +#define write_c0_config3(val) __write_32bit_c0_register($16, 3, val) + +/* + * The WatchLo register. There may be upto 8 of them. + */ +#define read_c0_watchlo0() __read_ulong_c0_register($18, 0) +#define read_c0_watchlo1() __read_ulong_c0_register($18, 1) +#define read_c0_watchlo2() __read_ulong_c0_register($18, 2) +#define read_c0_watchlo3() __read_ulong_c0_register($18, 3) +#define read_c0_watchlo4() __read_ulong_c0_register($18, 4) +#define read_c0_watchlo5() __read_ulong_c0_register($18, 5) +#define read_c0_watchlo6() __read_ulong_c0_register($18, 6) +#define read_c0_watchlo7() __read_ulong_c0_register($18, 7) +#define write_c0_watchlo0(val) __write_ulong_c0_register($18, 0, val) +#define write_c0_watchlo1(val) __write_ulong_c0_register($18, 1, val) +#define write_c0_watchlo2(val) __write_ulong_c0_register($18, 2, val) +#define write_c0_watchlo3(val) __write_ulong_c0_register($18, 3, val) +#define write_c0_watchlo4(val) __write_ulong_c0_register($18, 4, val) +#define write_c0_watchlo5(val) __write_ulong_c0_register($18, 5, val) +#define write_c0_watchlo6(val) __write_ulong_c0_register($18, 6, val) +#define write_c0_watchlo7(val) __write_ulong_c0_register($18, 7, val) + +/* + * The WatchHi register. There may be upto 8 of them. + */ +#define read_c0_watchhi0() __read_32bit_c0_register($19, 0) +#define read_c0_watchhi1() __read_32bit_c0_register($19, 1) +#define read_c0_watchhi2() __read_32bit_c0_register($19, 2) +#define read_c0_watchhi3() __read_32bit_c0_register($19, 3) +#define read_c0_watchhi4() __read_32bit_c0_register($19, 4) +#define read_c0_watchhi5() __read_32bit_c0_register($19, 5) +#define read_c0_watchhi6() __read_32bit_c0_register($19, 6) +#define read_c0_watchhi7() __read_32bit_c0_register($19, 7) + +#define write_c0_watchhi0(val) __write_32bit_c0_register($19, 0, val) +#define write_c0_watchhi1(val) __write_32bit_c0_register($19, 1, val) +#define write_c0_watchhi2(val) __write_32bit_c0_register($19, 2, val) +#define write_c0_watchhi3(val) __write_32bit_c0_register($19, 3, val) +#define write_c0_watchhi4(val) __write_32bit_c0_register($19, 4, val) +#define write_c0_watchhi5(val) __write_32bit_c0_register($19, 5, val) +#define write_c0_watchhi6(val) __write_32bit_c0_register($19, 6, val) +#define write_c0_watchhi7(val) __write_32bit_c0_register($19, 7, val) + +#define read_c0_xcontext() __read_ulong_c0_register($20, 0) +#define write_c0_xcontext(val) __write_ulong_c0_register($20, 0, val) + +#define read_c0_intcontrol() __read_32bit_c0_ctrl_register($20) +#define write_c0_intcontrol(val) __write_32bit_c0_ctrl_register($20, val) + +#define read_c0_framemask() __read_32bit_c0_register($21, 0) +#define write_c0_framemask(val) __write_32bit_c0_register($21, 0, val) + +/* RM9000 PerfControl performance counter control register */ +#define read_c0_perfcontrol() __read_32bit_c0_register($22, 0) +#define write_c0_perfcontrol(val) __write_32bit_c0_register($22, 0, val) + +#define read_c0_diag() __read_32bit_c0_register($22, 0) +#define write_c0_diag(val) __write_32bit_c0_register($22, 0, val) + +#define read_c0_diag1() __read_32bit_c0_register($22, 1) +#define write_c0_diag1(val) __write_32bit_c0_register($22, 1, val) + +#define read_c0_diag2() __read_32bit_c0_register($22, 2) +#define write_c0_diag2(val) __write_32bit_c0_register($22, 2, val) + +#define read_c0_diag3() __read_32bit_c0_register($22, 3) +#define write_c0_diag3(val) __write_32bit_c0_register($22, 3, val) + +#define read_c0_diag4() __read_32bit_c0_register($22, 4) +#define write_c0_diag4(val) __write_32bit_c0_register($22, 4, val) + +#define read_c0_diag5() __read_32bit_c0_register($22, 5) +#define write_c0_diag5(val) __write_32bit_c0_register($22, 5, val) + +#define read_c0_debug() __read_32bit_c0_register($23, 0) +#define write_c0_debug(val) __write_32bit_c0_register($23, 0, val) + +#define read_c0_depc() __read_ulong_c0_register($24, 0) +#define write_c0_depc(val) __write_ulong_c0_register($24, 0, val) + +/* + * MIPS32 / MIPS64 performance counters + */ +#define read_c0_perfctrl0() __read_32bit_c0_register($25, 0) +#define write_c0_perfctrl0(val) __write_32bit_c0_register($25, 0, val) +#define read_c0_perfcntr0() __read_32bit_c0_register($25, 1) +#define write_c0_perfcntr0(val) __write_32bit_c0_register($25, 1, val) +#define read_c0_perfctrl1() __read_32bit_c0_register($25, 2) +#define write_c0_perfctrl1(val) __write_32bit_c0_register($25, 2, val) +#define read_c0_perfcntr1() __read_32bit_c0_register($25, 3) +#define write_c0_perfcntr1(val) __write_32bit_c0_register($25, 3, val) +#define read_c0_perfctrl2() __read_32bit_c0_register($25, 4) +#define write_c0_perfctrl2(val) __write_32bit_c0_register($25, 4, val) +#define read_c0_perfcntr2() __read_32bit_c0_register($25, 5) +#define write_c0_perfcntr2(val) __write_32bit_c0_register($25, 5, val) +#define read_c0_perfctrl3() __read_32bit_c0_register($25, 6) +#define write_c0_perfctrl3(val) __write_32bit_c0_register($25, 6, val) +#define read_c0_perfcntr3() __read_32bit_c0_register($25, 7) +#define write_c0_perfcntr3(val) __write_32bit_c0_register($25, 7, val) + +/* RM9000 PerfCount performance counter register */ +#define read_c0_perfcount() __read_64bit_c0_register($25, 0) +#define write_c0_perfcount(val) __write_64bit_c0_register($25, 0, val) + +#define read_c0_ecc() __read_32bit_c0_register($26, 0) +#define write_c0_ecc(val) __write_32bit_c0_register($26, 0, val) + +#define read_c0_derraddr0() __read_ulong_c0_register($26, 1) +#define write_c0_derraddr0(val) __write_ulong_c0_register($26, 1, val) + +#define read_c0_cacheerr() __read_32bit_c0_register($27, 0) + +#define read_c0_derraddr1() __read_ulong_c0_register($27, 1) +#define write_c0_derraddr1(val) __write_ulong_c0_register($27, 1, val) + +#define read_c0_taglo() __read_32bit_c0_register($28, 0) +#define write_c0_taglo(val) __write_32bit_c0_register($28, 0, val) + +#define read_c0_taghi() __read_32bit_c0_register($29, 0) +#define write_c0_taghi(val) __write_32bit_c0_register($29, 0, val) + +#define read_c0_errorepc() __read_ulong_c0_register($30, 0) +#define write_c0_errorepc(val) __write_ulong_c0_register($30, 0, val) + +/* + * Macros to access the floating point coprocessor control registers + */ +#define read_32bit_cp1_register(source) \ +({ int __res; \ + __asm__ __volatile__( \ + ".set\tpush\n\t" \ + ".set\treorder\n\t" \ + "cfc1\t%0,"STR(source)"\n\t" \ + ".set\tpop" \ + : "=r" (__res)); \ + __res;}) + +/* + * TLB operations. + * + * It is responsibility of the caller to take care of any TLB hazards. + */ +static inline void tlb_probe(void) +{ + __asm__ __volatile__( + ".set noreorder\n\t" + "tlbp\n\t" + ".set reorder"); +} + +static inline void tlb_read(void) +{ + __asm__ __volatile__( + ".set noreorder\n\t" + "tlbr\n\t" + ".set reorder"); +} + +static inline void tlb_write_indexed(void) +{ + __asm__ __volatile__( + ".set noreorder\n\t" + "tlbwi\n\t" + ".set reorder"); +} + +static inline void tlb_write_random(void) +{ + __asm__ __volatile__( + ".set noreorder\n\t" + "tlbwr\n\t" + ".set reorder"); +} + +/* + * Manipulate bits in a c0 register. + */ +#define __BUILD_SET_C0(name) \ +static inline unsigned int \ +set_c0_##name(unsigned int set) \ +{ \ + unsigned int res; \ + \ + res = read_c0_##name(); \ + res |= set; \ + write_c0_##name(res); \ + \ + return res; \ +} \ + \ +static inline unsigned int \ +clear_c0_##name(unsigned int clear) \ +{ \ + unsigned int res; \ + \ + res = read_c0_##name(); \ + res &= ~clear; \ + write_c0_##name(res); \ + \ + return res; \ +} \ + \ +static inline unsigned int \ +change_c0_##name(unsigned int change, unsigned int new) \ +{ \ + unsigned int res; \ + \ + res = read_c0_##name(); \ + res &= ~change; \ + res |= (new & change); \ + write_c0_##name(res); \ + \ + return res; \ +} + +__BUILD_SET_C0(status) +__BUILD_SET_C0(cause) +__BUILD_SET_C0(config) +__BUILD_SET_C0(intcontrol) + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_MIPSREGS_H */ |