diff options
Diffstat (limited to 'include/asm-mips')
| -rw-r--r-- | include/asm-mips/ddb5xxx/ddb5476.h | 157 | ||||
| -rw-r--r-- | include/asm-mips/ddb5xxx/ddb5xxx.h | 4 |
2 files changed, 1 insertions, 160 deletions
diff --git a/include/asm-mips/ddb5xxx/ddb5476.h b/include/asm-mips/ddb5xxx/ddb5476.h deleted file mode 100644 index 4c23390d935..00000000000 --- a/include/asm-mips/ddb5xxx/ddb5476.h +++ /dev/null @@ -1,157 +0,0 @@ -/* - * header file specific for ddb5476 - * - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -/* - * Memory map (physical address) - * - * Note most of the following address must be properly aligned by the - * corresponding size. For example, if PCI_IO_SIZE is 16MB, then - * PCI_IO_BASE must be aligned along 16MB boundary. - */ -#define DDB_SDRAM_BASE 0x00000000 -#define DDB_SDRAM_SIZE 0x04000000 /* 64MB */ - -#define DDB_DCS3_BASE 0x04000000 /* flash 1 */ -#define DDB_DCS3_SIZE 0x01000000 /* 16MB */ - -#define DDB_DCS2_BASE 0x05000000 /* flash 2 */ -#define DDB_DCS2_SIZE 0x01000000 /* 16MB */ - -#define DDB_PCI_IO_BASE 0x06000000 -#define DDB_PCI_IO_SIZE 0x02000000 /* 32 MB */ - -#define DDB_PCI_MEM_BASE 0x08000000 -#define DDB_PCI_MEM_SIZE 0x08000000 /* 128 MB */ - -#define DDB_DCS5_BASE 0x13000000 /* DDB status regs */ -#define DDB_DCS5_SIZE 0x00200000 /* 2MB, 8-bit */ - -#define DDB_DCS4_BASE 0x14000000 /* DDB control regs */ -#define DDB_DCS4_SIZE 0x00200000 /* 2MB, 8-bit */ - -#define DDB_INTCS_BASE 0x1fa00000 /* VRC5476 control regs */ -#define DDB_INTCS_SIZE 0x00200000 /* 2MB */ - -#define DDB_BOOTCS_BASE 0x1fc00000 /* Boot ROM / EPROM /Flash */ -#define DDB_BOOTCS_SIZE 0x00200000 /* 2 MB - doc says 4MB */ - - -/* aliases */ -#define DDB_PCI_CONFIG_BASE DDB_PCI_MEM_BASE -#define DDB_PCI_CONFIG_SIZE DDB_PCI_MEM_SIZE - -/* PCI intr ack share PCIW0 with PCI IO */ -#define DDB_PCI_IACK_BASE DDB_PCI_IO_BASE - -/* - * Interrupt mapping - * - * We have three interrupt controllers: - * - * . CPU itself - 8 sources - * . i8259 - 16 sources - * . vrc5476 - 16 sources - * - * They connected as follows: - * all vrc5476 interrupts are routed to cpu IP2 (by software setting) - * all i2869 are routed to INTC in vrc5476 (by hardware connection) - * - * All VRC5476 PCI interrupts are level-triggered (no ack needed). - * All PCI irq but INTC are active low. - */ - -/* - * irq number block assignment - */ - -#define NUM_CPU_IRQ 8 -#define NUM_I8259_IRQ 16 -#define NUM_VRC5476_IRQ 16 - -#define DDB_IRQ_BASE 0 - -#define I8259_IRQ_BASE DDB_IRQ_BASE -#define VRC5476_IRQ_BASE (I8259_IRQ_BASE + NUM_I8259_IRQ) -#define CPU_IRQ_BASE (VRC5476_IRQ_BASE + NUM_VRC5476_IRQ) - -/* - * vrc5476 irq defs, see page 52-64 of Vrc5074 system controller manual - */ - -#define VRC5476_IRQ_CPCE 0 /* cpu parity error */ -#define VRC5476_IRQ_CNTD 1 /* cpu no target */ -#define VRC5476_IRQ_MCE 2 /* memory check error */ -#define VRC5476_IRQ_DMA 3 /* DMA */ -#define VRC5476_IRQ_UART 4 /* vrc5476 builtin UART, not used */ -#define VRC5476_IRQ_WDOG 5 /* watchdog timer */ -#define VRC5476_IRQ_GPT 6 /* general purpose timer */ -#define VRC5476_IRQ_LBRT 7 /* local bus read timeout */ -#define VRC5476_IRQ_INTA 8 /* PCI INT #A */ -#define VRC5476_IRQ_INTB 9 /* PCI INT #B */ -#define VRC5476_IRQ_INTC 10 /* PCI INT #C */ -#define VRC5476_IRQ_INTD 11 /* PCI INT #D */ -#define VRC5476_IRQ_INTE 12 /* PCI INT #E */ -#define VRC5476_IRQ_RESERVED_13 13 /* reserved */ -#define VRC5476_IRQ_PCIS 14 /* PCI SERR # */ -#define VRC5476_IRQ_PCI 15 /* PCI internal error */ - -/* - * i2859 irq assignment - */ -#define I8259_IRQ_RESERVED_0 0 -#define I8259_IRQ_KEYBOARD 1 /* M1543 default */ -#define I8259_IRQ_CASCADE 2 -#define I8259_IRQ_UART_B 3 /* M1543 default, may conflict with RTC according to schematic diagram */ -#define I8259_IRQ_UART_A 4 /* M1543 default */ -#define I8259_IRQ_PARALLEL 5 /* M1543 default */ -#define I8259_IRQ_RESERVED_6 6 -#define I8259_IRQ_RESERVED_7 7 -#define I8259_IRQ_RTC 8 /* who set this? */ -#define I8259_IRQ_USB 9 /* ddb_setup */ -#define I8259_IRQ_PMU 10 /* ddb_setup */ -#define I8259_IRQ_RESERVED_11 11 -#define I8259_IRQ_RESERVED_12 12 /* m1543_irq_setup */ -#define I8259_IRQ_RESERVED_13 13 -#define I8259_IRQ_HDC1 14 /* default and ddb_setup */ -#define I8259_IRQ_HDC2 15 /* default */ - - -/* - * misc - */ -#define VRC5476_I8259_CASCADE VRC5476_IRQ_INTC -#define CPU_VRC5476_CASCADE 2 - -#define is_i8259_irq(irq) ((irq) < NUM_I8259_IRQ) -#define nile4_to_irq(n) ((n)+NUM_I8259_IRQ) -#define irq_to_nile4(n) ((n)-NUM_I8259_IRQ) - -/* - * low-level irq functions - */ -#ifndef __ASSEMBLY__ -extern void nile4_map_irq(int nile4_irq, int cpu_irq); -extern void nile4_map_irq_all(int cpu_irq); -extern void nile4_enable_irq(int nile4_irq); -extern void nile4_disable_irq(int nile4_irq); -extern void nile4_disable_irq_all(void); -extern u16 nile4_get_irq_stat(int cpu_irq); -extern void nile4_enable_irq_output(int cpu_irq); -extern void nile4_disable_irq_output(int cpu_irq); -extern void nile4_set_pci_irq_polarity(int pci_irq, int high); -extern void nile4_set_pci_irq_level_or_edge(int pci_irq, int level); -extern void nile4_clear_irq(int nile4_irq); -extern void nile4_clear_irq_mask(u32 mask); -extern u8 nile4_i8259_iack(void); -extern void nile4_dump_irq_status(void); /* Debug */ -#endif /* !__ASSEMBLY__ */ diff --git a/include/asm-mips/ddb5xxx/ddb5xxx.h b/include/asm-mips/ddb5xxx/ddb5xxx.h index 2c8c93430c1..2f1b191c6ff 100644 --- a/include/asm-mips/ddb5xxx/ddb5xxx.h +++ b/include/asm-mips/ddb5xxx/ddb5xxx.h @@ -255,9 +255,7 @@ extern void ddb_pci_reset_bus(void); /* * include the board dependent part */ -#if defined(CONFIG_DDB5476) -#include <asm/ddb5xxx/ddb5476.h> -#elif defined(CONFIG_DDB5477) +#if defined(CONFIG_DDB5477) #include <asm/ddb5xxx/ddb5477.h> #else #error "Unknown DDB board!" |