diff options
Diffstat (limited to 'include/asm-mips')
| -rw-r--r-- | include/asm-mips/bootinfo.h | 1 | ||||
| -rw-r--r-- | include/asm-mips/cpu.h | 4 | ||||
| -rw-r--r-- | include/asm-mips/mach-pnx8550/cm.h | 43 | ||||
| -rw-r--r-- | include/asm-mips/mach-pnx8550/glb.h | 86 | ||||
| -rw-r--r-- | include/asm-mips/mach-pnx8550/int.h | 140 | ||||
| -rw-r--r-- | include/asm-mips/mach-pnx8550/kernel-entry-init.h | 262 | ||||
| -rw-r--r-- | include/asm-mips/mach-pnx8550/nand.h | 121 | ||||
| -rw-r--r-- | include/asm-mips/mach-pnx8550/pci.h | 185 | ||||
| -rw-r--r-- | include/asm-mips/mach-pnx8550/uart.h | 16 | ||||
| -rw-r--r-- | include/asm-mips/mach-pnx8550/usb.h | 32 | ||||
| -rw-r--r-- | include/asm-mips/mipsregs.h | 12 |
11 files changed, 901 insertions, 1 deletions
diff --git a/include/asm-mips/bootinfo.h b/include/asm-mips/bootinfo.h index e5c03c525bd..3870a76efc3 100644 --- a/include/asm-mips/bootinfo.h +++ b/include/asm-mips/bootinfo.h @@ -137,6 +137,7 @@ #define MACH_GROUP_PHILIPS 14 #define MACH_PHILIPS_NINO 0 /* Nino */ #define MACH_PHILIPS_VELO 1 /* Velo */ +#define MACH_PHILIPS_JBS 2 /* JBS */ /* * Valid machtype for group Globespan diff --git a/include/asm-mips/cpu.h b/include/asm-mips/cpu.h index 3bbb6431d21..ed92c0b1441 100644 --- a/include/asm-mips/cpu.h +++ b/include/asm-mips/cpu.h @@ -52,6 +52,7 @@ #define PRID_IMP_VR41XX 0x0c00 #define PRID_IMP_R12000 0x0e00 #define PRID_IMP_R8000 0x1000 +#define PRID_IMP_PR4450 0x1200 #define PRID_IMP_R4600 0x2000 #define PRID_IMP_R4700 0x2100 #define PRID_IMP_TX39 0x2200 @@ -187,7 +188,8 @@ #define CPU_24K 58 #define CPU_AU1200 59 #define CPU_34K 60 -#define CPU_LAST 60 +#define CPU_PR4450 61 +#define CPU_LAST 61 /* * ISA Level encodings diff --git a/include/asm-mips/mach-pnx8550/cm.h b/include/asm-mips/mach-pnx8550/cm.h new file mode 100644 index 00000000000..bb0a56c7d01 --- /dev/null +++ b/include/asm-mips/mach-pnx8550/cm.h @@ -0,0 +1,43 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Clock module specific definitions + * + * Author: source@mvista.com + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ + +#ifndef __PNX8550_CM_H +#define __PNX8550_CM_H + +#define PNX8550_CM_BASE 0xBBE47000 + +#define PNX8550_CM_PLL0_CTL *(volatile unsigned long *)(PNX8550_CM_BASE + 0x000) +#define PNX8550_CM_PLL1_CTL *(volatile unsigned long *)(PNX8550_CM_BASE + 0x004) +#define PNX8550_CM_PLL2_CTL *(volatile unsigned long *)(PNX8550_CM_BASE + 0x008) +#define PNX8550_CM_PLL3_CTL *(volatile unsigned long *)(PNX8550_CM_BASE + 0x00C) + +// Table not complete..... + +#define PNX8550_CM_PLL_BLOCKED_MASK 0x80000000 +#define PNX8550_CM_PLL_LOCK_MASK 0x40000000 +#define PNX8550_CM_PLL_CURRENT_ADJ_MASK 0x3c000000 +#define PNX8550_CM_PLL_N_MASK 0x01ff0000 +#define PNX8550_CM_PLL_M_MASK 0x00003f00 +#define PNX8550_CM_PLL_P_MASK 0x0000000c +#define PNX8550_CM_PLL_PD_MASK 0x00000002 + + +#endif diff --git a/include/asm-mips/mach-pnx8550/glb.h b/include/asm-mips/mach-pnx8550/glb.h new file mode 100644 index 00000000000..07aa85e609b --- /dev/null +++ b/include/asm-mips/mach-pnx8550/glb.h @@ -0,0 +1,86 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * PNX8550 global definitions + * + * Author: source@mvista.com + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ + +#ifndef __PNX8550_GLB_H +#define __PNX8550_GLB_H + +#define PNX8550_GLB1_BASE 0xBBE63000 +#define PNX8550_GLB2_BASE 0xBBE4d000 +#define PNX8550_RESET_BASE 0xBBE60000 + +/* PCI Inta Output Enable Registers */ +#define PNX8550_GLB2_ENAB_INTA_O *(volatile unsigned long *)(PNX8550_GLB2_BASE + 0x050) + +/* Bit 1:Enable DAC Powerdown + 0:DACs are enabled and are working normally + 1:DACs are powerdown +*/ +#define PNX8550_GLB_DAC_PD 0x2 +/* Bit 0:Enable of PCI inta output + 0 = Disable PCI inta output + 1 = Enable PCI inta output +*/ +#define PNX8550_GLB_ENABLE_INTA_O 0x1 + +/* PCI Direct Mappings */ +#define PNX8550_PCIMEM 0x12000000 +#define PNX8550_PCIMEM_SIZE 0x08000000 +#define PNX8550_PCIIO 0x1c000000 +#define PNX8550_PCIIO_SIZE 0x02000000 /* 32M */ + +#define PNX8550_PORT_BASE KSEG1 + +// GPIO def +#define PNX8550_GPIO_BASE 0x1Be00000 + +#define PNX8550_GPIO_DIRQ0 (PNX8550_GPIO_BASE + 0x104500) +#define PNX8550_GPIO_MC1 (PNX8550_GPIO_BASE + 0x104004) +#define PNX8550_GPIO_MC_31_BIT 30 +#define PNX8550_GPIO_MC_30_BIT 28 +#define PNX8550_GPIO_MC_29_BIT 26 +#define PNX8550_GPIO_MC_28_BIT 24 +#define PNX8550_GPIO_MC_27_BIT 22 +#define PNX8550_GPIO_MC_26_BIT 20 +#define PNX8550_GPIO_MC_25_BIT 18 +#define PNX8550_GPIO_MC_24_BIT 16 +#define PNX8550_GPIO_MC_23_BIT 14 +#define PNX8550_GPIO_MC_22_BIT 12 +#define PNX8550_GPIO_MC_21_BIT 10 +#define PNX8550_GPIO_MC_20_BIT 8 +#define PNX8550_GPIO_MC_19_BIT 6 +#define PNX8550_GPIO_MC_18_BIT 4 +#define PNX8550_GPIO_MC_17_BIT 2 +#define PNX8550_GPIO_MC_16_BIT 0 + +#define PNX8550_GPIO_MODE_PRIMOP 0x1 +#define PNX8550_GPIO_MODE_NO_OPENDR 0x2 +#define PNX8550_GPIO_MODE_OPENDR 0x3 + +// RESET module +#define PNX8550_RST_CTL *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x0) +#define PNX8550_RST_CAUSE *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x4) +#define PNX8550_RST_EN_WATCHDOG *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x8) + +#define PNX8550_RST_REL_MIPS_RST_N 0x8 +#define PNX8550_RST_DO_SW_RST 0x4 +#define PNX8550_RST_REL_SYS_RST_OUT 0x2 +#define PNX8550_RST_ASSERT_SYS_RST_OUT 0x1 +#endif diff --git a/include/asm-mips/mach-pnx8550/int.h b/include/asm-mips/mach-pnx8550/int.h new file mode 100644 index 00000000000..0e0668b524f --- /dev/null +++ b/include/asm-mips/mach-pnx8550/int.h @@ -0,0 +1,140 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Interrupt specific definitions + * + * Author: source@mvista.com + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ + +#ifndef __PNX8550_INT_H +#define __PNX8550_INT_H + +#define PNX8550_GIC_BASE 0xBBE3E000 + +#define PNX8550_GIC_PRIMASK_0 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x000) +#define PNX8550_GIC_PRIMASK_1 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x004) +#define PNX8550_GIC_VECTOR_0 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x100) +#define PNX8550_GIC_VECTOR_1 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x104) +#define PNX8550_GIC_PEND_1_31 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x200) +#define PNX8550_GIC_PEND_32_63 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x204) +#define PNX8550_GIC_PEND_64_70 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x208) +#define PNX8550_GIC_FEATURES *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x300) +#define PNX8550_GIC_REQ(x) *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x400 + (x)*4) +#define PNX8550_GIC_MOD_ID *(volatile unsigned long *)(PNX8550_GIC_BASE + 0xFFC) + +// cp0 is two software + six hw exceptions +#define PNX8550_INT_CP0_TOTINT 8 +#define PNX8550_INT_CP0_MIN 0 +#define PNX8550_INT_CP0_MAX (PNX8550_INT_CP0_MIN + PNX8550_INT_CP0_TOTINT - 1) + +#define MIPS_CPU_GIC_IRQ 2 +#define MIPS_CPU_TIMER_IRQ 7 + +// GIC are 71 exceptions connected to cp0's first hardware exception +#define PNX8550_INT_GIC_TOTINT 71 +#define PNX8550_INT_GIC_MIN (PNX8550_INT_CP0_MAX+1) +#define PNX8550_INT_GIC_MAX (PNX8550_INT_GIC_MIN + PNX8550_INT_GIC_TOTINT - 1) + +#define PNX8550_INT_UNDEF (PNX8550_INT_GIC_MIN+0) +#define PNX8550_INT_IPC_TARGET0_MIPS (PNX8550_INT_GIC_MIN+1) +#define PNX8550_INT_IPC_TARGET1_TM32_1 (PNX8550_INT_GIC_MIN+2) +#define PNX8550_INT_IPC_TARGET1_TM32_2 (PNX8550_INT_GIC_MIN+3) +#define PNX8550_INT_RESERVED_4 (PNX8550_INT_GIC_MIN+4) +#define PNX8550_INT_USB (PNX8550_INT_GIC_MIN+5) +#define PNX8550_INT_GPIO_EQ1 (PNX8550_INT_GIC_MIN+6) +#define PNX8550_INT_GPIO_EQ2 (PNX8550_INT_GIC_MIN+7) +#define PNX8550_INT_GPIO_EQ3 (PNX8550_INT_GIC_MIN+8) +#define PNX8550_INT_GPIO_EQ4 (PNX8550_INT_GIC_MIN+9) + +#define PNX8550_INT_GPIO_EQ5 (PNX8550_INT_GIC_MIN+10) +#define PNX8550_INT_GPIO_EQ6 (PNX8550_INT_GIC_MIN+11) +#define PNX8550_INT_RESERVED_12 (PNX8550_INT_GIC_MIN+12) +#define PNX8550_INT_QVCP1 (PNX8550_INT_GIC_MIN+13) +#define PNX8550_INT_QVCP2 (PNX8550_INT_GIC_MIN+14) +#define PNX8550_INT_I2C1 (PNX8550_INT_GIC_MIN+15) +#define PNX8550_INT_I2C2 (PNX8550_INT_GIC_MIN+16) +#define PNX8550_INT_ISO_UART1 (PNX8550_INT_GIC_MIN+17) +#define PNX8550_INT_ISO_UART2 (PNX8550_INT_GIC_MIN+18) +#define PNX8550_INT_UART1 (PNX8550_INT_GIC_MIN+19) + +#define PNX8550_INT_UART2 (PNX8550_INT_GIC_MIN+20) +#define PNX8550_INT_QNTR (PNX8550_INT_GIC_MIN+21) +#define PNX8550_INT_RESERVED22 (PNX8550_INT_GIC_MIN+22) +#define PNX8550_INT_T_DSC (PNX8550_INT_GIC_MIN+23) +#define PNX8550_INT_M_DSC (PNX8550_INT_GIC_MIN+24) +#define PNX8550_INT_RESERVED25 (PNX8550_INT_GIC_MIN+25) +#define PNX8550_INT_2D_DRAW_ENG (PNX8550_INT_GIC_MIN+26) +#define PNX8550_INT_MEM_BASED_SCALAR1 (PNX8550_INT_GIC_MIN+27) +#define PNX8550_INT_VIDEO_MPEG (PNX8550_INT_GIC_MIN+28) +#define PNX8550_INT_VIDEO_INPUT_P1 (PNX8550_INT_GIC_MIN+29) + +#define PNX8550_INT_VIDEO_INPUT_P2 (PNX8550_INT_GIC_MIN+30) +#define PNX8550_INT_SPDI1 (PNX8550_INT_GIC_MIN+31) +#define PNX8550_INT_SPDO (PNX8550_INT_GIC_MIN+32) +#define PNX8550_INT_AUDIO_INPUT1 (PNX8550_INT_GIC_MIN+33) +#define PNX8550_INT_AUDIO_OUTPUT1 (PNX8550_INT_GIC_MIN+34) +#define PNX8550_INT_AUDIO_INPUT2 (PNX8550_INT_GIC_MIN+35) +#define PNX8550_INT_AUDIO_OUTPUT2 (PNX8550_INT_GIC_MIN+36) +#define PNX8550_INT_MEMBASED_SCALAR2 (PNX8550_INT_GIC_MIN+37) +#define PNX8550_INT_VPK (PNX8550_INT_GIC_MIN+38) +#define PNX8550_INT_MPEG1_MIPS (PNX8550_INT_GIC_MIN+39) + +#define PNX8550_INT_MPEG1_TM (PNX8550_INT_GIC_MIN+40) +#define PNX8550_INT_MPEG2_MIPS (PNX8550_INT_GIC_MIN+41) +#define PNX8550_INT_MPEG2_TM (PNX8550_INT_GIC_MIN+42) +#define PNX8550_INT_TS_DMA (PNX8550_INT_GIC_MIN+43) +#define PNX8550_INT_EDMA (PNX8550_INT_GIC_MIN+44) +#define PNX8550_INT_TM_DEBUG1 (PNX8550_INT_GIC_MIN+45) +#define PNX8550_INT_TM_DEBUG2 (PNX8550_INT_GIC_MIN+46) +#define PNX8550_INT_PCI_INTA (PNX8550_INT_GIC_MIN+47) +#define PNX8550_INT_CLOCK_MODULE (PNX8550_INT_GIC_MIN+48) +#define PNX8550_INT_PCI_XIO_INTA_PCI (PNX8550_INT_GIC_MIN+49) + +#define PNX8550_INT_PCI_XIO_INTB_DMA (PNX8550_INT_GIC_MIN+50) +#define PNX8550_INT_PCI_XIO_INTC_GPPM (PNX8550_INT_GIC_MIN+51) +#define PNX8550_INT_PCI_XIO_INTD_GPXIO (PNX8550_INT_GIC_MIN+52) +#define PNX8550_INT_DVD_CSS (PNX8550_INT_GIC_MIN+53) +#define PNX8550_INT_VLD (PNX8550_INT_GIC_MIN+54) +#define PNX8550_INT_GPIO_TSU_7_0 (PNX8550_INT_GIC_MIN+55) +#define PNX8550_INT_GPIO_TSU_15_8 (PNX8550_INT_GIC_MIN+56) +#define PNX8550_INT_GPIO_CTU_IR (PNX8550_INT_GIC_MIN+57) +#define PNX8550_INT_GPIO0 (PNX8550_INT_GIC_MIN+58) +#define PNX8550_INT_GPIO1 (PNX8550_INT_GIC_MIN+59) + +#define PNX8550_INT_GPIO2 (PNX8550_INT_GIC_MIN+60) +#define PNX8550_INT_GPIO3 (PNX8550_INT_GIC_MIN+61) +#define PNX8550_INT_GPIO4 (PNX8550_INT_GIC_MIN+62) +#define PNX8550_INT_GPIO5 (PNX8550_INT_GIC_MIN+63) +#define PNX8550_INT_GPIO6 (PNX8550_INT_GIC_MIN+64) +#define PNX8550_INT_GPIO7 (PNX8550_INT_GIC_MIN+65) +#define PNX8550_INT_PMAN_SECURITY (PNX8550_INT_GIC_MIN+66) +#define PNX8550_INT_I2C3 (PNX8550_INT_GIC_MIN+67) +#define PNX8550_INT_RESERVED_68 (PNX8550_INT_GIC_MIN+68) +#define PNX8550_INT_SPDI2 (PNX8550_INT_GIC_MIN+69) + +#define PNX8550_INT_I2C4 (PNX8550_INT_GIC_MIN+70) + +// Timer are 3 exceptions connected to cp0's 7th hardware exception +#define PNX8550_INT_TIMER_TOTINT 3 +#define PNX8550_INT_TIMER_MIN (PNX8550_INT_GIC_MAX+1) +#define PNX8550_INT_TIMER_MAX (PNX8550_INT_TIMER_MIN + PNX8550_INT_TIMER_TOTINT - 1) + +#define PNX8550_INT_TIMER1 (PNX8550_INT_TIMER_MIN+0) +#define PNX8550_INT_TIMER2 (PNX8550_INT_TIMER_MIN+1) +#define PNX8550_INT_TIMER3 (PNX8550_INT_TIMER_MIN+2) +#define PNX8550_INT_WATCHDOG PNX8550_INT_TIMER3 + +#endif diff --git a/include/asm-mips/mach-pnx8550/kernel-entry-init.h b/include/asm-mips/mach-pnx8550/kernel-entry-init.h new file mode 100644 index 00000000000..57102fa9da5 --- /dev/null +++ b/include/asm-mips/mach-pnx8550/kernel-entry-init.h @@ -0,0 +1,262 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005 Embedded Alley Solutions, Inc + */ +#ifndef __ASM_MACH_KERNEL_ENTRY_INIT_H +#define __ASM_MACH_KERNEL_ENTRY_INIT_H + +#include <asm/cacheops.h> +#include <asm/addrspace.h> + +#define CO_CONFIGPR_VALID 0x3F1F41FF /* valid bits to write to ConfigPR */ +#define HAZARD_CP0 nop; nop; nop; nop; nop; nop; nop; nop; nop; nop; nop; nop; +#define CACHE_OPC 0xBC000000 /* MIPS cache instruction opcode */ +#define ICACHE_LINE_SIZE 32 /* Instruction cache line size bytes */ +#define DCACHE_LINE_SIZE 32 /* Data cache line size in bytes */ + +#define ICACHE_SET_COUNT 256 /* Instruction cache set count */ +#define DCACHE_SET_COUNT 128 /* Data cache set count */ + +#define ICACHE_SET_SIZE (ICACHE_SET_COUNT * ICACHE_LINE_SIZE) +#define DCACHE_SET_SIZE (DCACHE_SET_COUNT * DCACHE_LINE_SIZE) + + .macro kernel_entry_setup + .set push + .set noreorder + /* + * PNX8550 entry point, when running a non compressed + * kernel. When loading a zImage, the head.S code in + * arch/mips/zboot/pnx8550 will init the caches and, + * decompress the kernel, and branch to kernel_entry. + */ +cache_begin: li t0, (1<<28) + mtc0 t0, CP0_STATUS /* cp0 usable */ + HAZARD_CP0 + + mtc0 zero, CP0_CAUSE + HAZARD_CP0 + + + /* Set static virtual to phys address translation and TLB disabled */ + mfc0 t0, CP0_CONFIG, 7 + HAZARD_CP0 + + and t0,~((1<<19) | (1<<20)) /* TLB/MAP cleared */ + mtc0 t0, CP0_CONFIG, 7 + HAZARD_CP0 + + /* CPU boots with kseg0 cache algo set to 0x2 -- uncached */ + + init_icache + nop + init_dcache + nop + + cachePr4450ICReset + nop + + cachePr4450DCReset + nop + + /* read ConfigPR into t0 */ + mfc0 t0, CP0_CONFIG, 7 + HAZARD_CP0 + + /* enable the TLB */ + or t0, (1<<19) + + /* disable the ICACHE: at least 10x slower */ + /* or t0, (1<<26) */ + + /* disable the DCACHE; CONFIG_CPU_HAS_LLSC should not be set */ + /* or t0, (1<<27) */ + + and t0, CO_CONFIGPR_VALID + + /* enable TLB. */ + mtc0 t0, CP0_CONFIG, 7 + HAZARD_CP0 +cache_end: + /* Setup CMEM_0 to MMIO address space, 2MB */ + lui t0, 0x1BE0 + addi t0, t0, 0x3 + mtc0 $8, $22, 4 + nop + + /* Setup CMEM_1, 128MB */ + lui t0, 0x1000 + addi t0, t0, 0xf + mtc0 $8, $22, 5 + nop + + + /* Setup CMEM_2, 32MB */ + lui t0, 0x1C00 + addi t0, t0, 0xb + mtc0 $8, $22, 6 + nop + + /* Setup CMEM_3, 0MB */ + lui t0, 0x0 + addi t0, t0, 0x0 + mtc0 $8, $22, 7 + nop + + /* Enable cache */ + mfc0 t0, CP0_CONFIG + HAZARD_CP0 + and t0, t0, 0xFFFFFFF8 + or t0, t0, 3 + mtc0 t0, CP0_CONFIG + HAZARD_CP0 + .set pop + .endm + + .macro init_icache + .set push + .set noreorder + + /* Get Cache Configuration */ + mfc0 t3, CP0_CONFIG, 1 + HAZARD_CP0 + + /* get cache Line size */ + + srl t1, t3, 19 /* C0_CONFIGPR_IL_SHIFT */ + andi t1, t1, 0x7 /* C0_CONFIGPR_IL_MASK */ + beq t1, zero, pr4450_instr_cache_invalidated /* if zero instruction cache is absent */ + nop + addiu t0, t1, 1 + ori t1, zero, 1 + sllv t1, t1, t0 + + /* get max cache Index */ + srl t2, t3, 22 /* C0_CONFIGPR_IS_SHIFT */ + andi t2, t2, 0x7 /* C0_CONFIGPR_IS_MASK */ + addiu t0, t2, 6 + ori t2, zero, 1 + sllv t2, t2, t0 + + /* get max cache way */ + srl t3, t3, 16 /* C0_CONFIGPR_IA_SHIFT */ + andi t3, t3, 0x7 /* C0_CONFIGPR_IA_MASK */ + addiu t3, t3, 1 + + /* total no of cache lines */ + multu t2, t3 /* max index * max way */ + mflo t2 + addiu t2, t2, -1 + + move t0, zero +pr4450_next_instruction_cache_set: + cache Index_Invalidate_I, 0(t0) + addu t0, t0, t1 /* add bytes in a line */ + bne t2, zero, pr4450_next_instruction_cache_set + addiu t2, t2, -1 /* reduce no of lines to invalidate by one */ +pr4450_instr_cache_invalidated: + .set pop + .endm + + .macro init_dcache + .set push + .set noreorder + move t1, zero + + /* Store Tag Information */ + mtc0 zero, CP0_TAGLO, 0 + HAZARD_CP0 + + mtc0 zero, CP0_TAGHI, 0 + HAZARD_CP0 + + /* Cache size is 16384 = 512 lines x 32 bytes per line */ + or t2, zero, (128*4)-1 /* 512 lines */ + /* Invalidate all lines */ +2: + cache Index_Store_Tag_D, 0(t1) + addiu t2, t2, -1 + bne t2, zero, 2b + addiu t1, t1, 32 /* 32 bytes in a line */ + .set pop + .endm + + .macro cachePr4450ICReset + .set push + .set noreorder + + /* Save CP0 status reg on entry; */ + /* disable interrupts during cache reset */ + mfc0 t0, CP0_STATUS /* T0 = interrupt status on entry */ + HAZARD_CP0 + + mtc0 zero, CP0_STATUS /* disable CPU interrupts */ + HAZARD_CP0 + + or t1, zero, zero /* T1 = starting cache index (0) */ + ori t2, zero, (256 - 1) /* T2 = inst cache set cnt - 1 */ + + icache_invd_loop: + /* 9 == register t1 */ + .word (CACHE_OPC | (9 << 21) | (Index_Invalidate_I << 16) | \ + (0 * ICACHE_SET_SIZE)) /* invalidate inst cache WAY0 */ + .word (CACHE_OPC | (9 << 21) | (Index_Invalidate_I << 16) | \ + (1 * ICACHE_SET_SIZE)) /* invalidate inst cache WAY1 */ + + addiu t1, t1, ICACHE_LINE_SIZE /* T1 = next cache line index */ + bne t2, zero, icache_invd_loop /* T2 = 0 if all sets invalidated */ + addiu t2, t2, -1 /* decrement T2 set cnt (delay slot) */ + + /* Initialize the latches in the instruction cache tag */ + /* that drive the way selection tri-state bus drivers, by doing a */ + /* dummy load while the instruction cache is still disabled. */ + /* TODO: Is this needed ? */ + la t1, KSEG0 /* T1 = cached memory base address */ + lw zero, 0x0000(t1) /* (dummy read of first memory word) */ + + mtc0 t0, CP0_STATUS /* restore interrupt status on entry */ + HAZARD_CP0 + .set pop + .endm + + .macro cachePr4450DCReset + .set push + .set noreorder + mfc0 t0, CP0_STATUS /* T0 = interrupt status on entry */ + HAZARD_CP0 + mtc0 zero, CP0_STATUS /* disable CPU interrupts */ + HAZARD_CP0 + + /* Writeback/invalidate entire data cache sets/ways/lines */ + or t1, zero, zero /* T1 = starting cache index (0) */ + ori t2, zero, (DCACHE_SET_COUNT - 1) /* T2 = data cache set cnt - 1 */ + + dcache_wbinvd_loop: + /* 9 == register t1 */ + .word (CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \ + (0 * DCACHE_SET_SIZE)) /* writeback/invalidate WAY0 */ + .word (CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \ + (1 * DCACHE_SET_SIZE)) /* writeback/invalidate WAY1 */ + .word (CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \ + (2 * DCACHE_SET_SIZE)) /* writeback/invalidate WAY2 */ + .word (CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \ + (3 * DCACHE_SET_SIZE)) /* writeback/invalidate WAY3 */ + + addiu t1, t1, DCACHE_LINE_SIZE /* T1 = next data cache line index */ + bne t2, zero, dcache_wbinvd_loop /* T2 = 0 when wbinvd entire cache */ + addiu t2, t2, -1 /* decrement T2 set cnt (delay slot) */ + + /* Initialize the latches in the data cache tag that drive the way + selection tri-state bus drivers, by doing a dummy load while the + data cache is still in the disabled mode. TODO: Is this needed ? */ + la t1, KSEG0 /* T1 = cached memory base address */ + lw zero, 0x0000(t1) /* (dummy read of first memory word) */ + + mtc0 t0, CP0_STATUS /* restore interrupt status on entry */ + HAZARD_CP0 + .set pop + .endm + +#endif /* __ASM_MACH_KERNEL_ENTRY_INIT_H */ diff --git a/include/asm-mips/mach-pnx8550/nand.h b/include/asm-mips/mach-pnx8550/nand.h new file mode 100644 index 00000000000..aefbc514ab0 --- /dev/null +++ b/include/asm-mips/mach-pnx8550/nand.h @@ -0,0 +1,121 @@ +#ifndef __PNX8550_NAND_H +#define __PNX8550_NAND_H + +#define PNX8550_NAND_BASE_ADDR 0x10000000 +#define PNX8550_PCIXIO_BASE 0xBBE40000 + +#define PNX8550_DMA_EXT_ADDR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x800) +#define PNX8550_DMA_INT_ADDR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x804) +#define PNX8550_DMA_TRANS_SIZE *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x808) +#define PNX8550_DMA_CTRL *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x80c) +#define PNX8550_XIO_SEL0 *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x814) +#define PNX8550_GPXIO_ADDR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x820) +#define PNX8550_GPXIO_WR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x824) +#define PNX8550_GPXIO_RD *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x828) +#define PNX8550_GPXIO_CTRL *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x82C) +#define PNX8550_XIO_FLASH_CTRL *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x830) +#define PNX8550_GPXIO_INT_STATUS *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb0) +#define PNX8550_GPXIO_INT_ENABLE *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb4) +#define PNX8550_GPXIO_INT_CLEAR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb8) +#define PNX8550_DMA_INT_STATUS *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd0) +#define PNX8550_DMA_INT_ENABLE *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd4) +#define PNX8550_DMA_INT_CLEAR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd8) + +#define PNX8550_XIO_SEL0_EN_16BIT 0x00800000 +#define PNX8550_XIO_SEL0_USE_ACK 0x00400000 +#define PNX8550_XIO_SEL0_REN_HIGH 0x00100000 +#define PNX8550_XIO_SEL0_REN_LOW 0x00040000 +#define PNX8550_XIO_SEL0_WEN_HIGH 0x00010000 +#define PNX8550_XIO_SEL0_WEN_LOW 0x00004000 +#define PNX8550_XIO_SEL0_WAIT 0x00000200 +#define PNX8550_XIO_SEL0_OFFSET 0x00000020 +#define PNX8550_XIO_SEL0_TYPE_68360 0x00000000 +#define PNX8550_XIO_SEL0_TYPE_NOR 0x00000008 +#define PNX8550_XIO_SEL0_TYPE_NAND 0x00000010 +#define PNX8550_XIO_SEL0_TYPE_IDE 0x00000018 +#define PNX8550_XIO_SEL0_SIZE_8MB 0x00000000 +#define PNX8550_XIO_SEL0_SIZE_16MB 0x00000002 +#define PNX8550_XIO_SEL0_SIZE_32MB 0x00000004 +#define PNX8550_XIO_SEL0_SIZE_64MB 0x00000006 +#define PNX8550_XIO_SEL0_ENAB 0x00000001 + +#define PNX8550_SEL0_DEFAULT ((PNX8550_XIO_SEL0_EN_16BIT) | \ + (PNX8550_XIO_SEL0_REN_HIGH*0)| \ + (PNX8550_XIO_SEL0_REN_LOW*2) | \ + (PNX8550_XIO_SEL0_WEN_HIGH*0)| \ + (PNX8550_XIO_SEL0_WEN_LOW*2) | \ + (PNX8550_XIO_SEL0_WAIT*4) | \ + (PNX8550_XIO_SEL0_OFFSET*0) | \ + (PNX8550_XIO_SEL0_TYPE_NAND) | \ + (PNX8550_XIO_SEL0_SIZE_32MB) | \ + (PNX8550_XIO_SEL0_ENAB)) + +#define PNX8550_GPXIO_PENDING 0x00000200 +#define PNX8550_GPXIO_DONE 0x00000100 +#define PNX8550_GPXIO_CLR_DONE 0x00000080 +#define PNX8550_GPXIO_INIT 0x00000040 +#define PNX8550_GPXIO_READ_CMD 0x00000010 +#define PNX8550_GPXIO_BEN 0x0000000F + +#define PNX8550_XIO_FLASH_64MB 0x00200000 +#define PNX8550_XIO_FLASH_INC_DATA 0x00100000 +#define PNX8550_XIO_FLASH_CMD_PH 0x000C0000 +#define PNX8550_XIO_FLASH_CMD_PH2 0x00080000 +#define PNX8550_XIO_FLASH_CMD_PH1 0x00040000 +#define PNX8550_XIO_FLASH_CMD_PH0 0x00000000 +#define PNX8550_XIO_FLASH_ADR_PH 0x00030000 +#define PNX8550_XIO_FLASH_ADR_PH3 0x00030000 +#define PNX8550_XIO_FLASH_ADR_PH2 0x00020000 +#define PNX8550_XIO_FLASH_ADR_PH1 0x00010000 +#define PNX8550_XIO_FLASH_ADR_PH0 0x00000000 +#define PNX8550_XIO_FLASH_CMD_B(x) ((x<<8) & 0x0000FF00) +#define PNX8550_XIO_FLASH_CMD_A(x) (x & 0x000000FF) + +#define PNX8550_XIO_INT_ACK 0x00004000 +#define PNX8550_XIO_INT_COMPL 0x00002000 +#define PNX8550_XIO_INT_NONSUP 0x00000200 +#define PNX8550_XIO_INT_ABORT 0x00000004 + +#define PNX8550_DMA_CTRL_SINGLE_DATA 0x00000400 +#define PNX8550_DMA_CTRL_SND2XIO 0x00000200 +#define PNX8550_DMA_CTRL_FIX_ADDR 0x00000100 +#define PNX8550_DMA_CTRL_BURST_8 0x00000000 +#define PNX8550_DMA_CTRL_BURST_16 0x00000020 +#define PNX8550_DMA_CTRL_BURST_32 0x00000040 +#define PNX8550_DMA_CTRL_BURST_64 0x00000060 +#define PNX8550_DMA_CTRL_BURST_128 0x00000080 +#define PNX8550_DMA_CTRL_BURST_256 0x000000A0 +#define PNX8550_DMA_CTRL_BURST_512 0x000000C0 +#define PNX8550_DMA_CTRL_BURST_NORES 0x000000E0 +#define PNX8550_DMA_CTRL_INIT_DMA 0x00000010 +#define PNX8550_DMA_CTRL_CMD_TYPE 0x0000000F + +/* see PCI system arch, page 100 for the full list: */ +#define PNX8550_DMA_CTRL_PCI_CMD_READ 0x00000006 +#define PNX8550_DMA_CTRL_PCI_CMD_WRITE 0x00000007 + +#define PNX8550_DMA_INT_STAT_ACK_DONE (1<<14) +#define PNX8550_DMA_INT_STAT_DMA_DONE (1<<12) +#define PNX8550_DMA_INT_STAT_DMA_ERR (1<<9) +#define PNX8550_DMA_INT_STAT_PERR5 (1<<5) +#define PNX8550_DMA_INT_STAT_PERR4 (1<<4) +#define PNX8550_DMA_INT_STAT_M_ABORT (1<<2) +#define PNX8550_DMA_INT_STAT_T_ABORT (1<<1) + +#define PNX8550_DMA_INT_EN_ACK_DONE (1<<14) +#define PNX8550_DMA_INT_EN_DMA_DONE (1<<12) +#define PNX8550_DMA_INT_EN_DMA_ERR (1<<9) +#define PNX8550_DMA_INT_EN_PERR5 (1<<5) +#define PNX8550_DMA_INT_EN_PERR4 (1<<4) +#define PNX8550_DMA_INT_EN_M_ABORT (1<<2) +#define PNX8550_DMA_INT_EN_T_ABORT (1<<1) + +#define PNX8550_DMA_INT_CLR_ACK_DONE (1<<14) +#define PNX8550_DMA_INT_CLR_DMA_DONE (1<<12) +#define PNX8550_DMA_INT_CLR_DMA_ERR (1<<9) +#define PNX8550_DMA_INT_CLR_PERR5 (1<<5) +#define PNX8550_DMA_INT_CLR_PERR4 (1<<4) +#define PNX8550_DMA_INT_CLR_M_ABORT (1<<2) +#define PNX8550_DMA_INT_CLR_T_ABORT (1<<1) + +#endif diff --git a/include/asm-mips/mach-pnx8550/pci.h b/include/asm-mips/mach-pnx8550/pci.h new file mode 100644 index 00000000000..b921508d701 --- /dev/null +++ b/include/asm-mips/mach-pnx8550/pci.h @@ -0,0 +1,185 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * PCI specific definitions + * + * Author: source@mvista.com + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ + +#ifndef __PNX8550_PCI_H +#define __PNX8550_PCI_H + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> + +#define PCI_ACCESS_READ 0 +#define PCI_ACCESS_WRITE 1 + +#define PCI_CMD_IOR 0x20 +#define PCI_CMD_IOW 0x30 +#define PCI_CMD_CONFIG_READ 0xa0 +#define PCI_CMD_CONFIG_WRITE 0xb0 + +#define PCI_IO_TIMEOUT 1000 +#define PCI_IO_RETRY 5 +/* Timeout for IO and CFG accesses. + This is in 1/1024 th of a jiffie(=10ms) + i.e. approx 10us */ +#define PCI_IO_JIFFIES_TIMEOUT 40 +#define PCI_IO_JIFFIES_SHIFT 10 + +#define PCI_BYTE_ENABLE_MASK 0x0000000f +#define PCI_CFG_BUS_SHIFT 16 +#define PCI_CFG_FUNC_SHIFT 8 +#define PCI_CFG_REG_SHIFT 2 + +#define PCI_BASE 0x1be00000 +#define PCI_SETUP 0x00040010 +#define PCI_DIS_REQGNT (1<<30) +#define PCI_DIS_REQGNTA (1<<29) +#define PCI_DIS_REQGNTB (1<<28) +#define PCI_D2_SUPPORT (1<<27) +#define PCI_D1_SUPPORT (1<<26) +#define PCI_EN_TA (1<<24) +#define PCI_EN_PCI2MMI (1<<23) +#define PCI_EN_XIO (1<<22) +#define PCI_BASE18_PREF (1<<21) +#define SIZE_16M 0x3 +#define SIZE_32M 0x4 +#define SIZE_64M 0x5 +#define SIZE_128M 0x6 +#define PCI_SETUP_BASE18_SIZE(X) (X<<18) +#define PCI_SETUP_BASE18_EN (1<<17) +#define PCI_SETUP_BASE14_PREF (1<<16) +#define PCI_SETUP_BASE14_SIZE(X) (X<<12) +#define PCI_SETUP_BASE14_EN (1<<11) +#define PCI_SETUP_BASE10_PREF (1<<10) +#define PCI_SETUP_BASE10_SIZE(X) (X<<7) +#define PCI_SETUP_CFGMANAGE_EN (1<<1) +#define PCI_SETUP_PCIARB_EN (1<<0) + +#define PCI_CTRL 0x040014 +#define PCI_SWPB_DCS_PCI (1<<16) +#define PCI_SWPB_PCI_PCI (1<<15) +#define PCI_SWPB_PCI_DCS (1<<14) +#define PCI_REG_WR_POST (1<<13) +#define PCI_XIO_WR_POST (1<<12) +#define PCI_PCI2_WR_POST (1<<13) +#define PCI_PCI1_WR_POST (1<<12) +#define PCI_SERR_SEEN (1<<11) +#define PCI_B10_SPEC_RD (1<<6) +#define PCI_B14_SPEC_RD (1<<5) +#define PCI_B18_SPEC_RD (1<<4) +#define PCI_B10_NOSUBWORD (1<<3) +#define PCI_B14_NOSUBWORD (1<<2) +#define PCI_B18_NOSUBWORD (1<<1) +#define PCI_RETRY_TMREN (1<<0) + +#define PCI_BASE1_LO 0x040018 +#define PCI_BASE1_HI 0x04001C +#define PCI_BASE2_LO 0x040020 +#define PCI_BASE2_HI 0x040024 +#define PCI_RDLIFETIM 0x040028 +#define PCI_GPPM_ADDR 0x04002C +#define PCI_GPPM_WDAT 0x040030 +#define PCI_GPPM_RDAT 0x040034 +#define PCI_GPPM_CTRL 0x040038 +#define GPPM_DONE (1<<10) +#define INIT_PCI_CYCLE (1<<9) +#define GPPM_CMD(X) (((X)&0xf)<<4) +#define GPPM_BYTEEN(X) ((X)&0xf) +#define PCI_UNLOCKREG 0x04003C +#define UNLOCK_SSID(X) (((X)&0xff)<<8) +#define UNLOCK_SETUP(X) (((X)&0xff)<<0) +#define UNLOCK_MAGIC 0xCA +#define PCI_DEV_VEND_ID 0x040040 +#define DEVICE_ID(X) (((X)>>16)&0xffff) +#define VENDOR_ID(X) (((X)&0xffff)) +#define PCI_CFG_CMDSTAT 0x040044 +#define PCI_CFG_STATUS(X) (((X)>>16)&0xffff) +#define PCI_CFG_COMMAND(X) ((X)&0xffff) +#define PCI_CLASS_REV 0x040048 +#define PCI_CLASSCODE(X) (((X)>>8)&0xffffff) +#define PCI_REVID(X) ((X)&0xff) +#define PCI_LAT_TMR 0x04004c +#define PCI_BASE10 0x040050 +#define PCI_BASE14 0x040054 +#define PCI_BASE18 0x040058 +#define PCI_SUBSYS_ID 0x04006c +#define PCI_CAP_PTR 0x040074 +#define PCI_CFG_MISC 0x04007c +#define PCI_PMC 0x040080 +#define PCI_PWR_STATE 0x040084 +#define PCI_IO 0x040088 +#define PCI_SLVTUNING 0x04008C +#define PCI_DMATUNING 0x040090 +#define PCI_DMAEADDR 0x040800 +#define PCI_DMAIADDR 0x040804 +#define PCI_DMALEN 0x040808 +#define PCI_DMACTRL 0x04080C +#define PCI_XIOCTRL 0x040810 +#define PCI_SEL0PROF 0x040814 +#define PCI_SEL1PROF 0x040818 +#define PCI_SEL2PROF 0x04081C +#define PCI_GPXIOADDR 0x040820 +#define PCI_NANDCTRLS 0x400830 +#define PCI_SEL3PROF 0x040834 +#define PCI_SEL4PROF 0x040838 +#define PCI_GPXIO_STAT 0x040FB0 +#define PCI_GPXIO_IMASK 0x040FB4 +#define PCI_GPXIO_ICLR 0x040FB8 +#define PCI_GPXIO_ISET 0x040FBC +#define PCI_GPPM_STATUS 0x040FC0 +#define GPPM_DONE (1<<10) +#define GPPM_ERR (1<<9) +#define GPPM_MPAR_ERR (1<<8) +#define GPPM_PAR_ERR (1<<7) +#define GPPM_R_MABORT (1<<2) +#define GPPM_R_TABORT (1<<1) +#define PCI_GPPM_IMASK 0x040FC4 +#define PCI_GPPM_ICLR 0x040FC8 +#define PCI_GPPM_ISET 0x040FCC +#define PCI_DMA_STATUS 0x040FD0 +#define PCI_DMA_IMASK 0x040FD4 +#define PCI_DMA_ICLR 0x040FD8 +#define PCI_DMA_ISET 0x040FDC +#define PCI_ISTATUS 0x040FE0 +#define PCI_IMASK 0x040FE4 +#define PCI_ICLR 0x040FE8 +#define PCI_ISET 0x040FEC +#define PCI_MOD_ID 0x040FFC + +/* + * PCI configuration cycle AD bus definition + */ +/* Type 0 */ +#define PCI_CFG_TYPE0_REG_SHF 0 +#define PCI_CFG_TYPE0_FUNC_SHF 8 + +/* Type 1 */ +#define PCI_CFG_TYPE1_REG_SHF 0 +#define PCI_CFG_TYPE1_FUNC_SHF 8 +#define PCI_CFG_TYPE1_DEV_SHF 11 +#define PCI_CFG_TYPE1_BUS_SHF 16 + +/* + * Ethernet device DP83816 definition + */ +#define DP83816_IRQ_ETHER 66 + +#endif diff --git a/include/asm-mips/mach-pnx8550/uart.h b/include/asm-mips/mach-pnx8550/uart.h new file mode 100644 index 00000000000..e32b9a23d70 --- /dev/null +++ b/include/asm-mips/mach-pnx8550/uart.h @@ -0,0 +1,16 @@ +#ifndef __IP3106_UART_H +#define __IP3106_UART_H + +#include <int.h> + +/* early macros for kgdb use. fixme: clean this up */ + +#define UART_BASE 0xbbe4a000 /* PNX8550 */ + +#define PNX8550_UART_PORT0 (UART_BASE) +#define PNX8550_UART_PORT1 (UART_BASE + 0x1000) + +#define PNX8550_UART_INT(x) (PNX8550_INT_GIC_MIN+19+x) +#define IRQ_TO_UART(x) (x-PNX8550_INT_GIC_MIN-19) + +#endif diff --git a/include/asm-mips/mach-pnx8550/usb.h b/include/asm-mips/mach-pnx8550/usb.h new file mode 100644 index 00000000000..483b7fc65d4 --- /dev/null +++ b/include/asm-mips/mach-pnx8550/usb.h @@ -0,0 +1,32 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * USB specific definitions + * + * Author: source@mvista.com + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ + +#ifndef __PNX8550_USB_H +#define __PNX8550_USB_H + +/* + * USB Host controller + */ + +#define PNX8550_USB_OHCI_OP_BASE 0x1be48000 +#define PNX8550_USB_OHCI_OP_LEN 0x1000 + +#endif diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h index a7a43ff8c5c..08aa231b4de 100644 --- a/include/asm-mips/mipsregs.h +++ b/include/asm-mips/mipsregs.h @@ -841,12 +841,24 @@ do { \ #define read_c0_count() __read_32bit_c0_register($9, 0) #define write_c0_count(val) __write_32bit_c0_register($9, 0, val) +#define read_c0_count2() __read_32bit_c0_register($9, 6) /* pnx8550 */ +#define write_c0_count2(val) __write_32bit_c0_register($9, 6, val) + +#define read_c0_count3() __read_32bit_c0_register($9, 7) /* pnx8550 */ +#define write_c0_count3(val) __write_32bit_c0_register($9, 7, val) + #define read_c0_entryhi() __read_ulong_c0_register($10, 0) #define write_c0_entryhi(val) __write_ulong_c0_register($10, 0, val) #define read_c0_compare() __read_32bit_c0_register($11, 0) #define write_c0_compare(val) __write_32bit_c0_register($11, 0, val) +#define read_c0_compare2() __read_32bit_c0_register($11, 6) /* pnx8550 */ +#define write_c0_compare2(val) __write_32bit_c0_register($11, 6, val) + +#define read_c0_compare3() __read_32bit_c0_register($11, 7) /* pnx8550 */ +#define write_c0_compare3(val) __write_32bit_c0_register($11, 7, val) + #define read_c0_status() __read_32bit_c0_register($12, 0) #define write_c0_status(val) __write_32bit_c0_register($12, 0, val) |