diff options
Diffstat (limited to 'include/asm-mn10300/unit-asb2305/serial.h')
| -rw-r--r-- | include/asm-mn10300/unit-asb2305/serial.h | 120 |
1 files changed, 0 insertions, 120 deletions
diff --git a/include/asm-mn10300/unit-asb2305/serial.h b/include/asm-mn10300/unit-asb2305/serial.h deleted file mode 100644 index 73d31d67bb7..00000000000 --- a/include/asm-mn10300/unit-asb2305/serial.h +++ /dev/null @@ -1,120 +0,0 @@ -/* ASB2305-specific 8250 serial ports - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_UNIT_SERIAL_H -#define _ASM_UNIT_SERIAL_H - -#include <asm/cpu/cpu-regs.h> -#include <asm/proc/irq.h> -#include <linux/serial_reg.h> - -#define SERIAL_PORT0_BASE_ADDRESS 0xA6FB0000 -#define ASB2305_DEBUG_MCR __SYSREG(0xA6FB0000 + UART_MCR * 2, u8) - -#define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */ - -/* - * dispose of the /dev/ttyS0 serial port - */ -#ifndef CONFIG_GDBSTUB_ON_TTYSx - -#define SERIAL_PORT_DFNS \ - { \ - .baud_base = BASE_BAUD, \ - .irq = SERIAL_IRQ, \ - .flags = STD_COM_FLAGS, \ - .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \ - .iomem_reg_shift = 2, \ - .io_type = SERIAL_IO_MEM, \ - }, - -#ifndef __ASSEMBLY__ - -static inline void __debug_to_serial(const char *p, int n) -{ -} - -#endif /* !__ASSEMBLY__ */ - -#else /* CONFIG_GDBSTUB_ON_TTYSx */ - -#define SERIAL_PORT_DFNS /* stolen by gdb-stub */ - -#if defined(CONFIG_GDBSTUB_ON_TTYS0) -#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 4, u8) -#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8) -#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8) -#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8) -#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8) -#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8) -#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8) -#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8) -#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8) -#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8) -#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8) -#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8) -#define GDBPORT_SERIAL_IRQ SERIAL_IRQ - -#elif defined(CONFIG_GDBSTUB_ON_TTYS1) -#error The ASB2305 doesnt have a /dev/ttyS1 -#endif - -#ifndef __ASSEMBLY__ - -#define TTYS0_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8) -#define TTYS0_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8) -#define TTYS0_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8) -#define TTYS0_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8) - -#define LSR_WAIT_FOR(STATE) \ -do { \ - while (!(TTYS0_LSR & UART_LSR_##STATE)) {} \ -} while (0) -#define FLOWCTL_WAIT_FOR(LINE) \ -do { \ - while (!(TTYS0_MSR & UART_MSR_##LINE)) {} \ -} while (0) -#define FLOWCTL_CLEAR(LINE) \ -do { \ - TTYS0_MCR &= ~UART_MCR_##LINE; \ -} while (0) -#define FLOWCTL_SET(LINE) \ -do { \ - TTYS0_MCR |= UART_MCR_##LINE; \ -} while (0) -#define FLOWCTL_QUERY(LINE) ({ TTYS0_MSR & UART_MSR_##LINE; }) - -static inline void __debug_to_serial(const char *p, int n) -{ - char ch; - - FLOWCTL_SET(DTR); - - for (; n > 0; n--) { - LSR_WAIT_FOR(THRE); - FLOWCTL_WAIT_FOR(CTS); - - ch = *p++; - if (ch == 0x0a) { - TTYS0_TX = 0x0d; - LSR_WAIT_FOR(THRE); - FLOWCTL_WAIT_FOR(CTS); - } - TTYS0_TX = ch; - } - - FLOWCTL_CLEAR(DTR); -} - -#endif /* !__ASSEMBLY__ */ - -#endif /* CONFIG_GDBSTUB_ON_TTYSx */ - -#endif /* _ASM_UNIT_SERIAL_H */ |