summaryrefslogtreecommitdiffstats
path: root/include/asm-powerpc/hvcall.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-powerpc/hvcall.h')
-rw-r--r--include/asm-powerpc/hvcall.h173
1 files changed, 173 insertions, 0 deletions
diff --git a/include/asm-powerpc/hvcall.h b/include/asm-powerpc/hvcall.h
new file mode 100644
index 00000000000..d36da61dbc5
--- /dev/null
+++ b/include/asm-powerpc/hvcall.h
@@ -0,0 +1,173 @@
+#ifndef _ASM_POWERPC_HVCALL_H
+#define _ASM_POWERPC_HVCALL_H
+
+#define HVSC .long 0x44000022
+
+#define H_Success 0
+#define H_Busy 1 /* Hardware busy -- retry later */
+#define H_Constrained 4 /* Resource request constrained to max allowed */
+#define H_LongBusyStartRange 9900 /* Start of long busy range */
+#define H_LongBusyOrder1msec 9900 /* Long busy, hint that 1msec is a good time to retry */
+#define H_LongBusyOrder10msec 9901 /* Long busy, hint that 10msec is a good time to retry */
+#define H_LongBusyOrder100msec 9902 /* Long busy, hint that 100msec is a good time to retry */
+#define H_LongBusyOrder1sec 9903 /* Long busy, hint that 1sec is a good time to retry */
+#define H_LongBusyOrder10sec 9904 /* Long busy, hint that 10sec is a good time to retry */
+#define H_LongBusyOrder100sec 9905 /* Long busy, hint that 100sec is a good time to retry */
+#define H_LongBusyEndRange 9905 /* End of long busy range */
+#define H_Hardware -1 /* Hardware error */
+#define H_Function -2 /* Function not supported */
+#define H_Privilege -3 /* Caller not privileged */
+#define H_Parameter -4 /* Parameter invalid, out-of-range or conflicting */
+#define H_Bad_Mode -5 /* Illegal msr value */
+#define H_PTEG_Full -6 /* PTEG is full */
+#define H_Not_Found -7 /* PTE was not found" */
+#define H_Reserved_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */
+#define H_NoMem -9
+#define H_Authority -10
+#define H_Permission -11
+#define H_Dropped -12
+#define H_SourceParm -13
+#define H_DestParm -14
+#define H_RemoteParm -15
+#define H_Resource -16
+
+/* Long Busy is a condition that can be returned by the firmware
+ * when a call cannot be completed now, but the identical call
+ * should be retried later. This prevents calls blocking in the
+ * firmware for long periods of time. Annoyingly the firmware can return
+ * a range of return codes, hinting at how long we should wait before
+ * retrying. If you don't care for the hint, the macro below is a good
+ * way to check for the long_busy return codes
+ */
+#define H_isLongBusy(x) ((x >= H_LongBusyStartRange) && (x <= H_LongBusyEndRange))
+
+/* Flags */
+#define H_LARGE_PAGE (1UL<<(63-16))
+#define H_EXACT (1UL<<(63-24)) /* Use exact PTE or return H_PTEG_FULL */
+#define H_R_XLATE (1UL<<(63-25)) /* include a valid logical page num in the pte if the valid bit is set */
+#define H_READ_4 (1UL<<(63-26)) /* Return 4 PTEs */
+#define H_AVPN (1UL<<(63-32)) /* An avpn is provided as a sanity test */
+#define H_ANDCOND (1UL<<(63-33))
+#define H_ICACHE_INVALIDATE (1UL<<(63-40)) /* icbi, etc. (ignored for IO pages) */
+#define H_ICACHE_SYNCHRONIZE (1UL<<(63-41)) /* dcbst, icbi, etc (ignored for IO pages */
+#define H_ZERO_PAGE (1UL<<(63-48)) /* zero the page before mapping (ignored for IO pages) */
+#define H_COPY_PAGE (1UL<<(63-49))
+#define H_N (1UL<<(63-61))
+#define H_PP1 (1UL<<(63-62))
+#define H_PP2 (1UL<<(63-63))
+
+/* DABRX flags */
+#define H_DABRX_HYPERVISOR (1UL<<(63-61))
+#define H_DABRX_KERNEL (1UL<<(63-62))
+#define H_DABRX_USER (1UL<<(63-63))
+
+/* pSeries hypervisor opcodes */
+#define H_REMOVE 0x04
+#define H_ENTER 0x08
+#define H_READ 0x0c
+#define H_CLEAR_MOD 0x10
+#define H_CLEAR_REF 0x14
+#define H_PROTECT 0x18
+#define H_GET_TCE 0x1c
+#define H_PUT_TCE 0x20
+#define H_SET_SPRG0 0x24
+#define H_SET_DABR 0x28
+#define H_PAGE_INIT 0x2c
+#define H_SET_ASR 0x30
+#define H_ASR_ON 0x34
+#define H_ASR_OFF 0x38
+#define H_LOGICAL_CI_LOAD 0x3c
+#define H_LOGICAL_CI_STORE 0x40
+#define H_LOGICAL_CACHE_LOAD 0x44
+#define H_LOGICAL_CACHE_STORE 0x48
+#define H_LOGICAL_ICBI 0x4c
+#define H_LOGICAL_DCBF 0x50
+#define H_GET_TERM_CHAR 0x54
+#define H_PUT_TERM_CHAR 0x58
+#define H_REAL_TO_LOGICAL 0x5c
+#define H_HYPERVISOR_DATA 0x60
+#define H_EOI 0x64
+#define H_CPPR 0x68
+#define H_IPI 0x6c
+#define H_IPOLL 0x70
+#define H_XIRR 0x74
+#define H_PERFMON 0x7c
+#define H_MIGRATE_DMA 0x78
+#define H_REGISTER_VPA 0xDC
+#define H_CEDE 0xE0
+#define H_CONFER 0xE4
+#define H_PROD 0xE8
+#define H_GET_PPP 0xEC
+#define H_SET_PPP 0xF0
+#define H_PURR 0xF4
+#define H_PIC 0xF8
+#define H_REG_CRQ 0xFC
+#define H_FREE_CRQ 0x100
+#define H_VIO_SIGNAL 0x104
+#define H_SEND_CRQ 0x108
+#define H_COPY_RDMA 0x110
+#define H_SET_XDABR 0x134
+#define H_STUFF_TCE 0x138
+#define H_PUT_TCE_INDIRECT 0x13C
+#define H_VTERM_PARTNER_INFO 0x150
+#define H_REGISTER_VTERM 0x154
+#define H_FREE_VTERM 0x158
+#define H_POLL_PENDING 0x1D8
+
+#ifndef __ASSEMBLY__
+
+/* plpar_hcall() -- Generic call interface using above opcodes
+ *
+ * The actual call interface is a hypervisor call instruction with
+ * the opcode in R3 and input args in R4-R7.
+ * Status is returned in R3 with variable output values in R4-R11.
+ * Only H_PTE_READ with H_READ_4 uses R6-R11 so we ignore it for now
+ * and return only two out args which MUST ALWAYS BE PROVIDED.
+ */
+long plpar_hcall(unsigned long opcode,
+ unsigned long arg1,
+ unsigned long arg2,
+ unsigned long arg3,
+ unsigned long arg4,
+ unsigned long *out1,
+ unsigned long *out2,
+ unsigned long *out3);
+
+/* Same as plpar_hcall but for those opcodes that return no values
+ * other than status. Slightly more efficient.
+ */
+long plpar_hcall_norets(unsigned long opcode, ...);
+
+/*
+ * Special hcall interface for ibmveth support.
+ * Takes 8 input parms. Returns a rc and stores the
+ * R4 return value in *out1.
+ */
+long plpar_hcall_8arg_2ret(unsigned long opcode,
+ unsigned long arg1,
+ unsigned long arg2,
+ unsigned long arg3,
+ unsigned long arg4,
+ unsigned long arg5,
+ unsigned long arg6,
+ unsigned long arg7,
+ unsigned long arg8,
+ unsigned long *out1);
+
+/* plpar_hcall_4out()
+ *
+ * same as plpar_hcall except with 4 output arguments.
+ *
+ */
+long plpar_hcall_4out(unsigned long opcode,
+ unsigned long arg1,
+ unsigned long arg2,
+ unsigned long arg3,
+ unsigned long arg4,
+ unsigned long *out1,
+ unsigned long *out2,
+ unsigned long *out3,
+ unsigned long *out4);
+
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_POWERPC_HVCALL_H */