diff options
Diffstat (limited to 'include/asm-powerpc/mpic.h')
| -rw-r--r-- | include/asm-powerpc/mpic.h | 481 |
1 files changed, 0 insertions, 481 deletions
diff --git a/include/asm-powerpc/mpic.h b/include/asm-powerpc/mpic.h deleted file mode 100644 index fe566a348a8..00000000000 --- a/include/asm-powerpc/mpic.h +++ /dev/null @@ -1,481 +0,0 @@ -#ifndef _ASM_POWERPC_MPIC_H -#define _ASM_POWERPC_MPIC_H -#ifdef __KERNEL__ - -#include <linux/irq.h> -#include <linux/sysdev.h> -#include <asm/dcr.h> - -/* - * Global registers - */ - -#define MPIC_GREG_BASE 0x01000 - -#define MPIC_GREG_FEATURE_0 0x00000 -#define MPIC_GREG_FEATURE_LAST_SRC_MASK 0x07ff0000 -#define MPIC_GREG_FEATURE_LAST_SRC_SHIFT 16 -#define MPIC_GREG_FEATURE_LAST_CPU_MASK 0x00001f00 -#define MPIC_GREG_FEATURE_LAST_CPU_SHIFT 8 -#define MPIC_GREG_FEATURE_VERSION_MASK 0xff -#define MPIC_GREG_FEATURE_1 0x00010 -#define MPIC_GREG_GLOBAL_CONF_0 0x00020 -#define MPIC_GREG_GCONF_RESET 0x80000000 -#define MPIC_GREG_GCONF_8259_PTHROU_DIS 0x20000000 -#define MPIC_GREG_GCONF_NO_BIAS 0x10000000 -#define MPIC_GREG_GCONF_BASE_MASK 0x000fffff -#define MPIC_GREG_GCONF_MCK 0x08000000 -#define MPIC_GREG_GLOBAL_CONF_1 0x00030 -#define MPIC_GREG_GLOBAL_CONF_1_SIE 0x08000000 -#define MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO_MASK 0x70000000 -#define MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO(r) \ - (((r) << 28) & MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO_MASK) -#define MPIC_GREG_VENDOR_0 0x00040 -#define MPIC_GREG_VENDOR_1 0x00050 -#define MPIC_GREG_VENDOR_2 0x00060 -#define MPIC_GREG_VENDOR_3 0x00070 -#define MPIC_GREG_VENDOR_ID 0x00080 -#define MPIC_GREG_VENDOR_ID_STEPPING_MASK 0x00ff0000 -#define MPIC_GREG_VENDOR_ID_STEPPING_SHIFT 16 -#define MPIC_GREG_VENDOR_ID_DEVICE_ID_MASK 0x0000ff00 -#define MPIC_GREG_VENDOR_ID_DEVICE_ID_SHIFT 8 -#define MPIC_GREG_VENDOR_ID_VENDOR_ID_MASK 0x000000ff -#define MPIC_GREG_PROCESSOR_INIT 0x00090 -#define MPIC_GREG_IPI_VECTOR_PRI_0 0x000a0 -#define MPIC_GREG_IPI_VECTOR_PRI_1 0x000b0 -#define MPIC_GREG_IPI_VECTOR_PRI_2 0x000c0 -#define MPIC_GREG_IPI_VECTOR_PRI_3 0x000d0 -#define MPIC_GREG_IPI_STRIDE 0x10 -#define MPIC_GREG_SPURIOUS 0x000e0 -#define MPIC_GREG_TIMER_FREQ 0x000f0 - -/* - * - * Timer registers - */ -#define MPIC_TIMER_BASE 0x01100 -#define MPIC_TIMER_STRIDE 0x40 - -#define MPIC_TIMER_CURRENT_CNT 0x00000 -#define MPIC_TIMER_BASE_CNT 0x00010 -#define MPIC_TIMER_VECTOR_PRI 0x00020 -#define MPIC_TIMER_DESTINATION 0x00030 - -/* - * Per-Processor registers - */ - -#define MPIC_CPU_THISBASE 0x00000 -#define MPIC_CPU_BASE 0x20000 -#define MPIC_CPU_STRIDE 0x01000 - -#define MPIC_CPU_IPI_DISPATCH_0 0x00040 -#define MPIC_CPU_IPI_DISPATCH_1 0x00050 -#define MPIC_CPU_IPI_DISPATCH_2 0x00060 -#define MPIC_CPU_IPI_DISPATCH_3 0x00070 -#define MPIC_CPU_IPI_DISPATCH_STRIDE 0x00010 -#define MPIC_CPU_CURRENT_TASK_PRI 0x00080 -#define MPIC_CPU_TASKPRI_MASK 0x0000000f -#define MPIC_CPU_WHOAMI 0x00090 -#define MPIC_CPU_WHOAMI_MASK 0x0000001f -#define MPIC_CPU_INTACK 0x000a0 -#define MPIC_CPU_EOI 0x000b0 -#define MPIC_CPU_MCACK 0x000c0 - -/* - * Per-source registers - */ - -#define MPIC_IRQ_BASE 0x10000 -#define MPIC_IRQ_STRIDE 0x00020 -#define MPIC_IRQ_VECTOR_PRI 0x00000 -#define MPIC_VECPRI_MASK 0x80000000 -#define MPIC_VECPRI_ACTIVITY 0x40000000 /* Read Only */ -#define MPIC_VECPRI_PRIORITY_MASK 0x000f0000 -#define MPIC_VECPRI_PRIORITY_SHIFT 16 -#define MPIC_VECPRI_VECTOR_MASK 0x000007ff -#define MPIC_VECPRI_POLARITY_POSITIVE 0x00800000 -#define MPIC_VECPRI_POLARITY_NEGATIVE 0x00000000 -#define MPIC_VECPRI_POLARITY_MASK 0x00800000 -#define MPIC_VECPRI_SENSE_LEVEL 0x00400000 -#define MPIC_VECPRI_SENSE_EDGE 0x00000000 -#define MPIC_VECPRI_SENSE_MASK 0x00400000 -#define MPIC_IRQ_DESTINATION 0x00010 - -#define MPIC_MAX_IRQ_SOURCES 2048 -#define MPIC_MAX_CPUS 32 -#define MPIC_MAX_ISU 32 - -/* - * Tsi108 implementation of MPIC has many differences from the original one - */ - -/* - * Global registers - */ - -#define TSI108_GREG_BASE 0x00000 -#define TSI108_GREG_FEATURE_0 0x00000 -#define TSI108_GREG_GLOBAL_CONF_0 0x00004 -#define TSI108_GREG_VENDOR_ID 0x0000c -#define TSI108_GREG_IPI_VECTOR_PRI_0 0x00204 /* Doorbell 0 */ -#define TSI108_GREG_IPI_STRIDE 0x0c -#define TSI108_GREG_SPURIOUS 0x00010 -#define TSI108_GREG_TIMER_FREQ 0x00014 - -/* - * Timer registers - */ -#define TSI108_TIMER_BASE 0x0030 -#define TSI108_TIMER_STRIDE 0x10 -#define TSI108_TIMER_CURRENT_CNT 0x00000 -#define TSI108_TIMER_BASE_CNT 0x00004 -#define TSI108_TIMER_VECTOR_PRI 0x00008 -#define TSI108_TIMER_DESTINATION 0x0000c - -/* - * Per-Processor registers - */ -#define TSI108_CPU_BASE 0x00300 -#define TSI108_CPU_STRIDE 0x00040 -#define TSI108_CPU_IPI_DISPATCH_0 0x00200 -#define TSI108_CPU_IPI_DISPATCH_STRIDE 0x00000 -#define TSI108_CPU_CURRENT_TASK_PRI 0x00000 -#define TSI108_CPU_WHOAMI 0xffffffff -#define TSI108_CPU_INTACK 0x00004 -#define TSI108_CPU_EOI 0x00008 -#define TSI108_CPU_MCACK 0x00004 /* Doesn't really exist here */ - -/* - * Per-source registers - */ -#define TSI108_IRQ_BASE 0x00100 -#define TSI108_IRQ_STRIDE 0x00008 -#define TSI108_IRQ_VECTOR_PRI 0x00000 -#define TSI108_VECPRI_VECTOR_MASK 0x000000ff -#define TSI108_VECPRI_POLARITY_POSITIVE 0x01000000 -#define TSI108_VECPRI_POLARITY_NEGATIVE 0x00000000 -#define TSI108_VECPRI_SENSE_LEVEL 0x02000000 -#define TSI108_VECPRI_SENSE_EDGE 0x00000000 -#define TSI108_VECPRI_POLARITY_MASK 0x01000000 -#define TSI108_VECPRI_SENSE_MASK 0x02000000 -#define TSI108_IRQ_DESTINATION 0x00004 - -/* weird mpic register indices and mask bits in the HW info array */ -enum { - MPIC_IDX_GREG_BASE = 0, - MPIC_IDX_GREG_FEATURE_0, - MPIC_IDX_GREG_GLOBAL_CONF_0, - MPIC_IDX_GREG_VENDOR_ID, - MPIC_IDX_GREG_IPI_VECTOR_PRI_0, - MPIC_IDX_GREG_IPI_STRIDE, - MPIC_IDX_GREG_SPURIOUS, - MPIC_IDX_GREG_TIMER_FREQ, - - MPIC_IDX_TIMER_BASE, - MPIC_IDX_TIMER_STRIDE, - MPIC_IDX_TIMER_CURRENT_CNT, - MPIC_IDX_TIMER_BASE_CNT, - MPIC_IDX_TIMER_VECTOR_PRI, - MPIC_IDX_TIMER_DESTINATION, - - MPIC_IDX_CPU_BASE, - MPIC_IDX_CPU_STRIDE, - MPIC_IDX_CPU_IPI_DISPATCH_0, - MPIC_IDX_CPU_IPI_DISPATCH_STRIDE, - MPIC_IDX_CPU_CURRENT_TASK_PRI, - MPIC_IDX_CPU_WHOAMI, - MPIC_IDX_CPU_INTACK, - MPIC_IDX_CPU_EOI, - MPIC_IDX_CPU_MCACK, - - MPIC_IDX_IRQ_BASE, - MPIC_IDX_IRQ_STRIDE, - MPIC_IDX_IRQ_VECTOR_PRI, - - MPIC_IDX_VECPRI_VECTOR_MASK, - MPIC_IDX_VECPRI_POLARITY_POSITIVE, - MPIC_IDX_VECPRI_POLARITY_NEGATIVE, - MPIC_IDX_VECPRI_SENSE_LEVEL, - MPIC_IDX_VECPRI_SENSE_EDGE, - MPIC_IDX_VECPRI_POLARITY_MASK, - MPIC_IDX_VECPRI_SENSE_MASK, - MPIC_IDX_IRQ_DESTINATION, - MPIC_IDX_END -}; - - -#ifdef CONFIG_MPIC_U3_HT_IRQS -/* Fixup table entry */ -struct mpic_irq_fixup -{ - u8 __iomem *base; - u8 __iomem *applebase; - u32 data; - unsigned int index; -}; -#endif /* CONFIG_MPIC_U3_HT_IRQS */ - - -enum mpic_reg_type { - mpic_access_mmio_le, - mpic_access_mmio_be, -#ifdef CONFIG_PPC_DCR - mpic_access_dcr -#endif -}; - -struct mpic_reg_bank { - u32 __iomem *base; -#ifdef CONFIG_PPC_DCR - dcr_host_t dhost; -#endif /* CONFIG_PPC_DCR */ -}; - -struct mpic_irq_save { - u32 vecprio, - dest; -#ifdef CONFIG_MPIC_U3_HT_IRQS - u32 fixup_data; -#endif -}; - -/* The instance data of a given MPIC */ -struct mpic -{ - /* The remapper for this MPIC */ - struct irq_host *irqhost; - - /* The "linux" controller struct */ - struct irq_chip hc_irq; -#ifdef CONFIG_MPIC_U3_HT_IRQS - struct irq_chip hc_ht_irq; -#endif -#ifdef CONFIG_SMP - struct irq_chip hc_ipi; -#endif - const char *name; - /* Flags */ - unsigned int flags; - /* How many irq sources in a given ISU */ - unsigned int isu_size; - unsigned int isu_shift; - unsigned int isu_mask; - unsigned int irq_count; - /* Number of sources */ - unsigned int num_sources; - /* Number of CPUs */ - unsigned int num_cpus; - /* default senses array */ - unsigned char *senses; - unsigned int senses_count; - - /* vector numbers used for internal sources (ipi/timers) */ - unsigned int ipi_vecs[4]; - unsigned int timer_vecs[4]; - - /* Spurious vector to program into unused sources */ - unsigned int spurious_vec; - -#ifdef CONFIG_MPIC_U3_HT_IRQS - /* The fixup table */ - struct mpic_irq_fixup *fixups; - spinlock_t fixup_lock; -#endif - - /* Register access method */ - enum mpic_reg_type reg_type; - - /* The various ioremap'ed bases */ - struct mpic_reg_bank gregs; - struct mpic_reg_bank tmregs; - struct mpic_reg_bank cpuregs[MPIC_MAX_CPUS]; - struct mpic_reg_bank isus[MPIC_MAX_ISU]; - - /* Protected sources */ - unsigned long *protected; - -#ifdef CONFIG_MPIC_WEIRD - /* Pointer to HW info array */ - u32 *hw_set; -#endif - -#ifdef CONFIG_PCI_MSI - spinlock_t bitmap_lock; - unsigned long *hwirq_bitmap; -#endif - -#ifdef CONFIG_MPIC_BROKEN_REGREAD - u32 isu_reg0_shadow[MPIC_MAX_IRQ_SOURCES]; -#endif - - /* link */ - struct mpic *next; - - struct sys_device sysdev; - -#ifdef CONFIG_PM - struct mpic_irq_save *save_data; -#endif -}; - -/* - * MPIC flags (passed to mpic_alloc) - * - * The top 4 bits contain an MPIC bhw id that is used to index the - * register offsets and some masks when CONFIG_MPIC_WEIRD is set. - * Note setting any ID (leaving those bits to 0) means standard MPIC - */ - -/* This is the primary controller, only that one has IPIs and - * has afinity control. A non-primary MPIC always uses CPU0 - * registers only - */ -#define MPIC_PRIMARY 0x00000001 - -/* Set this for a big-endian MPIC */ -#define MPIC_BIG_ENDIAN 0x00000002 -/* Broken U3 MPIC */ -#define MPIC_U3_HT_IRQS 0x00000004 -/* Broken IPI registers (autodetected) */ -#define MPIC_BROKEN_IPI 0x00000008 -/* MPIC wants a reset */ -#define MPIC_WANTS_RESET 0x00000010 -/* Spurious vector requires EOI */ -#define MPIC_SPV_EOI 0x00000020 -/* No passthrough disable */ -#define MPIC_NO_PTHROU_DIS 0x00000040 -/* DCR based MPIC */ -#define MPIC_USES_DCR 0x00000080 -/* MPIC has 11-bit vector fields (or larger) */ -#define MPIC_LARGE_VECTORS 0x00000100 -/* Enable delivery of prio 15 interrupts as MCK instead of EE */ -#define MPIC_ENABLE_MCK 0x00000200 -/* Disable bias among target selection, spread interrupts evenly */ -#define MPIC_NO_BIAS 0x00000400 -/* Ignore NIRQS as reported by FRR */ -#define MPIC_BROKEN_FRR_NIRQS 0x00000800 - -/* MPIC HW modification ID */ -#define MPIC_REGSET_MASK 0xf0000000 -#define MPIC_REGSET(val) (((val) & 0xf ) << 28) -#define MPIC_GET_REGSET(flags) (((flags) >> 28) & 0xf) - -#define MPIC_REGSET_STANDARD MPIC_REGSET(0) /* Original MPIC */ -#define MPIC_REGSET_TSI108 MPIC_REGSET(1) /* Tsi108/109 PIC */ - -/* Allocate the controller structure and setup the linux irq descs - * for the range if interrupts passed in. No HW initialization is - * actually performed. - * - * @phys_addr: physial base address of the MPIC - * @flags: flags, see constants above - * @isu_size: number of interrupts in an ISU. Use 0 to use a - * standard ISU-less setup (aka powermac) - * @irq_offset: first irq number to assign to this mpic - * @irq_count: number of irqs to use with this mpic IRQ sources. Pass 0 - * to match the number of sources - * @ipi_offset: first irq number to assign to this mpic IPI sources, - * used only on primary mpic - * @senses: array of sense values - * @senses_num: number of entries in the array - * - * Note about the sense array. If none is passed, all interrupts are - * setup to be level negative unless MPIC_U3_HT_IRQS is set in which - * case they are edge positive (and the array is ignored anyway). - * The values in the array start at the first source of the MPIC, - * that is senses[0] correspond to linux irq "irq_offset". - */ -extern struct mpic *mpic_alloc(struct device_node *node, - phys_addr_t phys_addr, - unsigned int flags, - unsigned int isu_size, - unsigned int irq_count, - const char *name); - -/* Assign ISUs, to call before mpic_init() - * - * @mpic: controller structure as returned by mpic_alloc() - * @isu_num: ISU number - * @phys_addr: physical address of the ISU - */ -extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, - phys_addr_t phys_addr); - -/* Set default sense codes - * - * @mpic: controller - * @senses: array of sense codes - * @count: size of above array - * - * Optionally provide an array (indexed on hardware interrupt numbers - * for this MPIC) of default sense codes for the chip. Those are linux - * sense codes IRQ_TYPE_* - * - * The driver gets ownership of the pointer, don't dispose of it or - * anything like that. __init only. - */ -extern void mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count); - - -/* Initialize the controller. After this has been called, none of the above - * should be called again for this mpic - */ -extern void mpic_init(struct mpic *mpic); - -/* - * All of the following functions must only be used after the - * ISUs have been assigned and the controller fully initialized - * with mpic_init() - */ - - -/* Change the priority of an interrupt. Default is 8 for irqs and - * 10 for IPIs. You can call this on both IPIs and IRQ numbers, but the - * IPI number is then the offset'ed (linux irq number mapped to the IPI) - */ -extern void mpic_irq_set_priority(unsigned int irq, unsigned int pri); - -/* Setup a non-boot CPU */ -extern void mpic_setup_this_cpu(void); - -/* Clean up for kexec (or cpu offline or ...) */ -extern void mpic_teardown_this_cpu(int secondary); - -/* Get the current cpu priority for this cpu (0..15) */ -extern int mpic_cpu_get_priority(void); - -/* Set the current cpu priority for this cpu */ -extern void mpic_cpu_set_priority(int prio); - -/* Request IPIs on primary mpic */ -extern void mpic_request_ipis(void); - -/* Send an IPI (non offseted number 0..3) */ -extern void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask); - -/* Send a message (IPI) to a given target (cpu number or MSG_*) */ -void smp_mpic_message_pass(int target, int msg); - -/* Unmask a specific virq */ -extern void mpic_unmask_irq(unsigned int irq); -/* Mask a specific virq */ -extern void mpic_mask_irq(unsigned int irq); -/* EOI a specific virq */ -extern void mpic_end_irq(unsigned int irq); - -/* Fetch interrupt from a given mpic */ -extern unsigned int mpic_get_one_irq(struct mpic *mpic); -/* This one gets from the primary mpic */ -extern unsigned int mpic_get_irq(void); -/* Fetch Machine Check interrupt from primary mpic */ -extern unsigned int mpic_get_mcirq(void); - -/* Set the EPIC clock ratio */ -void mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio); - -/* Enable/Disable EPIC serial interrupt mode */ -void mpic_set_serial_int(struct mpic *mpic, int enable); - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_MPIC_H */ |