1 files changed, 160 insertions, 0 deletions
diff --git a/include/asm-ppc/elf.h b/include/asm-ppc/elf.h
new file mode 100644
index 00000000000..2c056966efd
--- /dev/null
+++ b/include/asm-ppc/elf.h
@@ -0,0 +1,160 @@
+#ifndef __PPC_ELF_H
+#define __PPC_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+#include <asm/types.h>
+#include <asm/ptrace.h>
+#include <asm/cputable.h>
+
+/* PowerPC relocations defined by the ABIs */
+#define R_PPC_NONE		0
+#define R_PPC_ADDR32		1	/* 32bit absolute address */
+#define R_PPC_ADDR24		2	/* 26bit address, 2 bits ignored.  */
+#define R_PPC_ADDR16		3	/* 16bit absolute address */
+#define R_PPC_ADDR16_LO		4	/* lower 16bit of absolute address */
+#define R_PPC_ADDR16_HI		5	/* high 16bit of absolute address */
+#define R_PPC_ADDR16_HA		6	/* adjusted high 16bit */
+#define R_PPC_ADDR14		7	/* 16bit address, 2 bits ignored */
+#define R_PPC_ADDR14_BRTAKEN	8
+#define R_PPC_ADDR14_BRNTAKEN	9
+#define R_PPC_REL24		10	/* PC relative 26 bit */
+#define R_PPC_REL14		11	/* PC relative 16 bit */
+#define R_PPC_REL14_BRTAKEN	12
+#define R_PPC_REL14_BRNTAKEN	13
+#define R_PPC_GOT16		14
+#define R_PPC_GOT16_LO		15
+#define R_PPC_GOT16_HI		16
+#define R_PPC_GOT16_HA		17
+#define R_PPC_PLTREL24		18
+#define R_PPC_COPY		19
+#define R_PPC_GLOB_DAT		20
+#define R_PPC_JMP_SLOT		21
+#define R_PPC_RELATIVE		22
+#define R_PPC_LOCAL24PC		23
+#define R_PPC_UADDR32		24
+#define R_PPC_UADDR16		25
+#define R_PPC_REL32		26
+#define R_PPC_PLT32		27
+#define R_PPC_PLTREL32		28
+#define R_PPC_PLT16_LO		29
+#define R_PPC_PLT16_HI		30
+#define R_PPC_PLT16_HA		31
+#define R_PPC_SDAREL16		32
+#define R_PPC_SECTOFF		33
+#define R_PPC_SECTOFF_LO	34
+#define R_PPC_SECTOFF_HI	35
+#define R_PPC_SECTOFF_HA	36
+/* Keep this the last entry.  */
+#define R_PPC_NUM		37
+
+#define ELF_NGREG	48	/* includes nip, msr, lr, etc. */
+#define ELF_NFPREG	33	/* includes fpscr */
+#define ELF_NVRREG	33	/* includes vscr */
+#define ELF_NEVRREG	34	/* includes acc (as 2) */
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_ARCH	EM_PPC
+#define ELF_CLASS	ELFCLASS32
+#define ELF_DATA	ELFDATA2MSB
+
+/* General registers */
+typedef unsigned long elf_greg_t;
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+/* Floating point registers */
+typedef double elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+/* Altivec registers */
+typedef __vector128 elf_vrreg_t;
+typedef elf_vrreg_t elf_vrregset_t[ELF_NVRREG];
+
+#ifdef __KERNEL__
+
+struct task_struct;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+
+#define elf_check_arch(x) ((x)->e_machine == EM_PPC)
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         (0x08000000)
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	4096
+
+#define ELF_CORE_COPY_REGS(gregs, regs)				\
+	memcpy((gregs), (regs), sizeof(struct pt_regs));	\
+	memset((char *)(gregs) + sizeof(struct pt_regs), 0,	\
+	       sizeof(elf_gregset_t) - sizeof(struct pt_regs));
+
+#define ELF_CORE_COPY_TASK_REGS(t, elfregs)			\
+	((t)->thread.regs?					\
+	 ({ ELF_CORE_COPY_REGS((elfregs), (t)->thread.regs); 1; }): 0)
+
+extern int dump_task_fpu(struct task_struct *t, elf_fpregset_t *fpu);
+#define ELF_CORE_COPY_FPREGS(t, fpu)	dump_task_fpu((t), (fpu))
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  This could be done in userspace,
+   but it's not easy, and we've already done it here.  */
+
+#define ELF_HWCAP	(cur_cpu_spec[0]->cpu_user_features)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.
+
+   For the moment, we have only optimizations for the Intel generations,
+   but that could change... */
+
+#define ELF_PLATFORM	(NULL)
+
+#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+
+/*
+ * We need to put in some extra aux table entries to tell glibc what
+ * the cache block size is, so it can use the dcbz instruction safely.
+ */
+#define AT_DCACHEBSIZE		19
+#define AT_ICACHEBSIZE		20
+#define AT_UCACHEBSIZE		21
+/* A special ignored type value for PPC, for glibc compatibility.  */
+#define AT_IGNOREPPC		22
+
+extern int dcache_bsize;
+extern int icache_bsize;
+extern int ucache_bsize;
+
+/*
+ * The requirements here are:
+ * - keep the final alignment of sp (sp & 0xf)
+ * - make sure the 32-bit value at the first 16 byte aligned position of
+ *   AUXV is greater than 16 for glibc compatibility.
+ *   AT_IGNOREPPC is used for that.
+ * - for compatibility with glibc ARCH_DLINFO must always be defined on PPC,
+ *   even if DLINFO_ARCH_ITEMS goes to zero or is undefined.
+ */
+#define ARCH_DLINFO							\
+do {									\
+	/* Handle glibc compatibility. */				\
+	NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC);			\
+	NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC);			\
+	/* Cache size items */						\
+	NEW_AUX_ENT(AT_DCACHEBSIZE, dcache_bsize);			\
+	NEW_AUX_ENT(AT_ICACHEBSIZE, icache_bsize);			\
+	NEW_AUX_ENT(AT_UCACHEBSIZE, ucache_bsize);			\
+ } while (0)
+
+#endif /* __KERNEL__ */
+#endif