diff options
Diffstat (limited to 'include/asm-ppc/ibm_ocp.h')
| -rw-r--r-- | include/asm-ppc/ibm_ocp.h | 204 |
1 files changed, 0 insertions, 204 deletions
diff --git a/include/asm-ppc/ibm_ocp.h b/include/asm-ppc/ibm_ocp.h deleted file mode 100644 index ddce616f765..00000000000 --- a/include/asm-ppc/ibm_ocp.h +++ /dev/null @@ -1,204 +0,0 @@ -/* - * ibm_ocp.h - * - * (c) Benjamin Herrenschmidt (benh@kernel.crashing.org) - * Mipsys - France - * - * Derived from work (c) Armin Kuster akuster@pacbell.net - * - * Additional support and port to 2.6 LDM/sysfs by - * Matt Porter <mporter@kernel.crashing.org> - * Copyright 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ -#ifdef __KERNEL__ -#ifndef __IBM_OCP_H__ -#define __IBM_OCP_H__ - -#include <asm/types.h> - -/* - * IBM 4xx OCP system information - */ -struct ocp_sys_info_data { - int opb_bus_freq; /* OPB Bus Frequency (Hz) */ - int ebc_bus_freq; /* EBC Bus Frequency (Hz) */ -}; - -extern struct ocp_sys_info_data ocp_sys_info; - -/* - * EMAC additional data and sysfs support - * - * Note about mdio_idx: When you have a zmii, it's usually - * not necessary, it covers the case of the 405EP which has - * the MDIO lines on EMAC0 only - * - * Note about phy_map: Per EMAC map of PHY ids which should - * be probed by emac_probe. Different EMACs can have - * overlapping maps. - * - * Note, this map uses inverse logic for bits: - * 0 - id should be probed - * 1 - id should be ignored - * - * Default value of 0x00000000 - will result in usual - * auto-detection logic. - * - */ - -struct ocp_func_emac_data { - int rgmii_idx; /* RGMII device index or -1 */ - int rgmii_mux; /* RGMII input of this EMAC */ - int zmii_idx; /* ZMII device index or -1 */ - int zmii_mux; /* ZMII input of this EMAC */ - int mal_idx; /* MAL device index */ - int mal_rx_chan; /* MAL rx channel number */ - int mal_tx_chan; /* MAL tx channel number */ - int wol_irq; /* WOL interrupt */ - int mdio_idx; /* EMAC idx of MDIO master or -1 */ - int tah_idx; /* TAH device index or -1 */ - int phy_mode; /* PHY type or configurable mode */ - u8 mac_addr[6]; /* EMAC mac address */ - u32 phy_map; /* EMAC phy map */ - u32 phy_feat_exc; /* Excluded PHY features */ -}; - -/* Sysfs support */ -#define OCP_SYSFS_EMAC_DATA() \ -OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, rgmii_idx) \ -OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, rgmii_mux) \ -OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, zmii_idx) \ -OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, zmii_mux) \ -OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mal_idx) \ -OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mal_rx_chan) \ -OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mal_tx_chan) \ -OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, wol_irq) \ -OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mdio_idx) \ -OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, tah_idx) \ -OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, phy_mode) \ -OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "0x%08x\n", emac, phy_map) \ -OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "0x%08x\n", emac, phy_feat_exc)\ - \ -void ocp_show_emac_data(struct device *dev) \ -{ \ - device_create_file(dev, &dev_attr_emac_rgmii_idx); \ - device_create_file(dev, &dev_attr_emac_rgmii_mux); \ - device_create_file(dev, &dev_attr_emac_zmii_idx); \ - device_create_file(dev, &dev_attr_emac_zmii_mux); \ - device_create_file(dev, &dev_attr_emac_mal_idx); \ - device_create_file(dev, &dev_attr_emac_mal_rx_chan); \ - device_create_file(dev, &dev_attr_emac_mal_tx_chan); \ - device_create_file(dev, &dev_attr_emac_wol_irq); \ - device_create_file(dev, &dev_attr_emac_mdio_idx); \ - device_create_file(dev, &dev_attr_emac_tah_idx); \ - device_create_file(dev, &dev_attr_emac_phy_mode); \ - device_create_file(dev, &dev_attr_emac_phy_map); \ - device_create_file(dev, &dev_attr_emac_phy_feat_exc); \ -} - -/* - * PHY mode settings (EMAC <-> ZMII/RGMII bridge <-> PHY) - */ -#define PHY_MODE_NA 0 -#define PHY_MODE_MII 1 -#define PHY_MODE_RMII 2 -#define PHY_MODE_SMII 3 -#define PHY_MODE_RGMII 4 -#define PHY_MODE_TBI 5 -#define PHY_MODE_GMII 6 -#define PHY_MODE_RTBI 7 -#define PHY_MODE_SGMII 8 - -#ifdef CONFIG_40x -/* - * Helper function to copy MAC addresses from the bd_t to OCP EMAC - * additions. - * - * The range of EMAC indices (inclusive) to be copied are the arguments. - */ -static inline void ibm_ocp_set_emac(int start, int end) -{ - int i; - struct ocp_def *def; - - /* Copy MAC addresses to EMAC additions */ - for (i=start; i<=end; i++) { - def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, i); - if (i == 0) - memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr, - __res.bi_enetaddr, 6); -#if defined(CONFIG_405EP) || defined(CONFIG_44x) - else if (i == 1) - memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr, - __res.bi_enet1addr, 6); -#endif -#if defined(CONFIG_440GX) - else if (i == 2) - memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr, - __res.bi_enet2addr, 6); - else if (i == 3) - memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr, - __res.bi_enet3addr, 6); -#endif - } -} -#endif - -/* - * MAL additional data and sysfs support - */ -struct ocp_func_mal_data { - int num_tx_chans; /* Number of TX channels */ - int num_rx_chans; /* Number of RX channels */ - int txeob_irq; /* TX End Of Buffer IRQ */ - int rxeob_irq; /* RX End Of Buffer IRQ */ - int txde_irq; /* TX Descriptor Error IRQ */ - int rxde_irq; /* RX Descriptor Error IRQ */ - int serr_irq; /* MAL System Error IRQ */ - int dcr_base; /* MALx_CFG DCR number */ -}; - -#define OCP_SYSFS_MAL_DATA() \ -OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, num_tx_chans) \ -OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, num_rx_chans) \ -OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, txeob_irq) \ -OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, rxeob_irq) \ -OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, txde_irq) \ -OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, rxde_irq) \ -OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, serr_irq) \ -OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, dcr_base) \ - \ -void ocp_show_mal_data(struct device *dev) \ -{ \ - device_create_file(dev, &dev_attr_mal_num_tx_chans); \ - device_create_file(dev, &dev_attr_mal_num_rx_chans); \ - device_create_file(dev, &dev_attr_mal_txeob_irq); \ - device_create_file(dev, &dev_attr_mal_rxeob_irq); \ - device_create_file(dev, &dev_attr_mal_txde_irq); \ - device_create_file(dev, &dev_attr_mal_rxde_irq); \ - device_create_file(dev, &dev_attr_mal_serr_irq); \ - device_create_file(dev, &dev_attr_mal_dcr_base); \ -} - -/* - * IIC additional data and sysfs support - */ -struct ocp_func_iic_data { - int fast_mode; /* IIC fast mode enabled */ -}; - -#define OCP_SYSFS_IIC_DATA() \ -OCP_SYSFS_ADDTL(struct ocp_func_iic_data, "%d\n", iic, fast_mode) \ - \ -void ocp_show_iic_data(struct device *dev) \ -{ \ - device_create_file(dev, &dev_attr_iic_fast_mode); \ -} -#endif /* __IBM_OCP_H__ */ -#endif /* __KERNEL__ */ |