summaryrefslogtreecommitdiffstats
path: root/include/asm-ppc/irq.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-ppc/irq.h')
-rw-r--r--include/asm-ppc/irq.h400
1 files changed, 400 insertions, 0 deletions
diff --git a/include/asm-ppc/irq.h b/include/asm-ppc/irq.h
new file mode 100644
index 00000000000..06b86be61ed
--- /dev/null
+++ b/include/asm-ppc/irq.h
@@ -0,0 +1,400 @@
+#ifdef __KERNEL__
+#ifndef _ASM_IRQ_H
+#define _ASM_IRQ_H
+
+#include <linux/config.h>
+#include <asm/machdep.h> /* ppc_md */
+#include <asm/atomic.h>
+
+/*
+ * These constants are used for passing information about interrupt
+ * signal polarity and level/edge sensing to the low-level PIC chip
+ * drivers.
+ */
+#define IRQ_SENSE_MASK 0x1
+#define IRQ_SENSE_LEVEL 0x1 /* interrupt on active level */
+#define IRQ_SENSE_EDGE 0x0 /* interrupt triggered by edge */
+
+#define IRQ_POLARITY_MASK 0x2
+#define IRQ_POLARITY_POSITIVE 0x2 /* high level or low->high edge */
+#define IRQ_POLARITY_NEGATIVE 0x0 /* low level or high->low edge */
+
+#if defined(CONFIG_40x)
+#include <asm/ibm4xx.h>
+
+#ifndef NR_BOARD_IRQS
+#define NR_BOARD_IRQS 0
+#endif
+
+#ifndef UIC_WIDTH /* Number of interrupts per device */
+#define UIC_WIDTH 32
+#endif
+
+#ifndef NR_UICS /* number of UIC devices */
+#define NR_UICS 1
+#endif
+
+#if defined (CONFIG_403)
+/*
+ * The PowerPC 403 cores' Asynchronous Interrupt Controller (AIC) has
+ * 32 possible interrupts, a majority of which are not implemented on
+ * all cores. There are six configurable, external interrupt pins and
+ * there are eight internal interrupts for the on-chip serial port
+ * (SPU), DMA controller, and JTAG controller.
+ *
+ */
+
+#define NR_AIC_IRQS 32
+#define NR_IRQS (NR_AIC_IRQS + NR_BOARD_IRQS)
+
+#elif !defined (CONFIG_403)
+
+/*
+ * The PowerPC 405 cores' Universal Interrupt Controller (UIC) has 32
+ * possible interrupts as well. There are seven, configurable external
+ * interrupt pins and there are 17 internal interrupts for the on-chip
+ * serial port, DMA controller, on-chip Ethernet controller, PCI, etc.
+ *
+ */
+
+
+#define NR_UIC_IRQS UIC_WIDTH
+#define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS)
+#endif
+static __inline__ int
+irq_canonicalize(int irq)
+{
+ return (irq);
+}
+
+#elif defined(CONFIG_44x)
+#include <asm/ibm44x.h>
+
+#define NR_UIC_IRQS 32
+#define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS)
+
+static __inline__ int
+irq_canonicalize(int irq)
+{
+ return (irq);
+}
+
+#elif defined(CONFIG_8xx)
+
+/* Now include the board configuration specific associations.
+*/
+#include <asm/mpc8xx.h>
+
+/* The MPC8xx cores have 16 possible interrupts. There are eight
+ * possible level sensitive interrupts assigned and generated internally
+ * from such devices as CPM, PCMCIA, RTC, PIT, TimeBase and Decrementer.
+ * There are eight external interrupts (IRQs) that can be configured
+ * as either level or edge sensitive.
+ *
+ * On some implementations, there is also the possibility of an 8259
+ * through the PCI and PCI-ISA bridges.
+ *
+ * We are "flattening" the interrupt vectors of the cascaded CPM
+ * and 8259 interrupt controllers so that we can uniquely identify
+ * any interrupt source with a single integer.
+ */
+#define NR_SIU_INTS 16
+#define NR_CPM_INTS 32
+#ifndef NR_8259_INTS
+#define NR_8259_INTS 0
+#endif
+
+#define SIU_IRQ_OFFSET 0
+#define CPM_IRQ_OFFSET (SIU_IRQ_OFFSET + NR_SIU_INTS)
+#define I8259_IRQ_OFFSET (CPM_IRQ_OFFSET + NR_CPM_INTS)
+
+#define NR_IRQS (NR_SIU_INTS + NR_CPM_INTS + NR_8259_INTS)
+
+/* These values must be zero-based and map 1:1 with the SIU configuration.
+ * They are used throughout the 8xx I/O subsystem to generate
+ * interrupt masks, flags, and other control patterns. This is why the
+ * current kernel assumption of the 8259 as the base controller is such
+ * a pain in the butt.
+ */
+#define SIU_IRQ0 (0) /* Highest priority */
+#define SIU_LEVEL0 (1)
+#define SIU_IRQ1 (2)
+#define SIU_LEVEL1 (3)
+#define SIU_IRQ2 (4)
+#define SIU_LEVEL2 (5)
+#define SIU_IRQ3 (6)
+#define SIU_LEVEL3 (7)
+#define SIU_IRQ4 (8)
+#define SIU_LEVEL4 (9)
+#define SIU_IRQ5 (10)
+#define SIU_LEVEL5 (11)
+#define SIU_IRQ6 (12)
+#define SIU_LEVEL6 (13)
+#define SIU_IRQ7 (14)
+#define SIU_LEVEL7 (15)
+
+/* The internal interrupts we can configure as we see fit.
+ * My personal preference is CPM at level 2, which puts it above the
+ * MBX PCI/ISA/IDE interrupts.
+ */
+#ifndef PIT_INTERRUPT
+#define PIT_INTERRUPT SIU_LEVEL0
+#endif
+#ifndef CPM_INTERRUPT
+#define CPM_INTERRUPT SIU_LEVEL2
+#endif
+#ifndef PCMCIA_INTERRUPT
+#define PCMCIA_INTERRUPT SIU_LEVEL6
+#endif
+#ifndef DEC_INTERRUPT
+#define DEC_INTERRUPT SIU_LEVEL7
+#endif
+
+/* Some internal interrupt registers use an 8-bit mask for the interrupt
+ * level instead of a number.
+ */
+#define mk_int_int_mask(IL) (1 << (7 - (IL/2)))
+
+/* always the same on 8xx -- Cort */
+static __inline__ int irq_canonicalize(int irq)
+{
+ return irq;
+}
+
+#elif defined(CONFIG_83xx)
+#include <asm/mpc83xx.h>
+
+static __inline__ int irq_canonicalize(int irq)
+{
+ return irq;
+}
+
+#define NR_IRQS (NR_IPIC_INTS)
+
+#elif defined(CONFIG_85xx)
+/* Now include the board configuration specific associations.
+*/
+#include <asm/mpc85xx.h>
+
+/* The MPC8560 openpic has 32 internal interrupts and 12 external
+ * interrupts.
+ *
+ * We are "flattening" the interrupt vectors of the cascaded CPM
+ * so that we can uniquely identify any interrupt source with a
+ * single integer.
+ */
+#define NR_CPM_INTS 64
+#define NR_EPIC_INTS 44
+#ifndef NR_8259_INTS
+#define NR_8259_INTS 0
+#endif
+#define NUM_8259_INTERRUPTS NR_8259_INTS
+
+#ifndef CPM_IRQ_OFFSET
+#define CPM_IRQ_OFFSET 0
+#endif
+
+#define NR_IRQS (NR_EPIC_INTS + NR_CPM_INTS + NR_8259_INTS)
+
+/* Internal IRQs on MPC85xx OpenPIC */
+
+#ifndef MPC85xx_OPENPIC_IRQ_OFFSET
+#ifdef CONFIG_CPM2
+#define MPC85xx_OPENPIC_IRQ_OFFSET (CPM_IRQ_OFFSET + NR_CPM_INTS)
+#else
+#define MPC85xx_OPENPIC_IRQ_OFFSET 0
+#endif
+#endif
+
+/* Not all of these exist on all MPC85xx implementations */
+#define MPC85xx_IRQ_L2CACHE ( 0 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_ECM ( 1 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_DDR ( 2 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_LBIU ( 3 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_DMA0 ( 4 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_DMA1 ( 5 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_DMA2 ( 6 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_DMA3 ( 7 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_PCI1 ( 8 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_PCI2 ( 9 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_RIO_ERROR ( 9 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_RIO_BELL (10 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_RIO_TX (11 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_RIO_RX (12 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC1_TX (13 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC1_RX (14 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC1_ERROR (18 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC2_TX (19 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC2_RX (20 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC2_ERROR (24 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_FEC (25 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_DUART (26 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_IIC1 (27 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_PERFMON (28 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_SEC2 (29 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_CPM (30 + MPC85xx_OPENPIC_IRQ_OFFSET)
+
+/* The 12 external interrupt lines */
+#define MPC85xx_IRQ_EXT0 (32 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT1 (33 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT2 (34 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT3 (35 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT4 (36 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT5 (37 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT6 (38 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT7 (39 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT8 (40 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT9 (41 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT10 (42 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT11 (43 + MPC85xx_OPENPIC_IRQ_OFFSET)
+
+/* CPM related interrupts */
+#define SIU_INT_ERROR ((uint)0x00+CPM_IRQ_OFFSET)
+#define SIU_INT_I2C ((uint)0x01+CPM_IRQ_OFFSET)
+#define SIU_INT_SPI ((uint)0x02+CPM_IRQ_OFFSET)
+#define SIU_INT_RISC ((uint)0x03+CPM_IRQ_OFFSET)
+#define SIU_INT_SMC1 ((uint)0x04+CPM_IRQ_OFFSET)
+#define SIU_INT_SMC2 ((uint)0x05+CPM_IRQ_OFFSET)
+#define SIU_INT_USB ((uint)0x0b+CPM_IRQ_OFFSET)
+#define SIU_INT_TIMER1 ((uint)0x0c+CPM_IRQ_OFFSET)
+#define SIU_INT_TIMER2 ((uint)0x0d+CPM_IRQ_OFFSET)
+#define SIU_INT_TIMER3 ((uint)0x0e+CPM_IRQ_OFFSET)
+#define SIU_INT_TIMER4 ((uint)0x0f+CPM_IRQ_OFFSET)
+#define SIU_INT_FCC1 ((uint)0x20+CPM_IRQ_OFFSET)
+#define SIU_INT_FCC2 ((uint)0x21+CPM_IRQ_OFFSET)
+#define SIU_INT_FCC3 ((uint)0x22+CPM_IRQ_OFFSET)
+#define SIU_INT_MCC1 ((uint)0x24+CPM_IRQ_OFFSET)
+#define SIU_INT_MCC2 ((uint)0x25+CPM_IRQ_OFFSET)
+#define SIU_INT_SCC1 ((uint)0x28+CPM_IRQ_OFFSET)
+#define SIU_INT_SCC2 ((uint)0x29+CPM_IRQ_OFFSET)
+#define SIU_INT_SCC3 ((uint)0x2a+CPM_IRQ_OFFSET)
+#define SIU_INT_SCC4 ((uint)0x2b+CPM_IRQ_OFFSET)
+#define SIU_INT_PC15 ((uint)0x30+CPM_IRQ_OFFSET)
+#define SIU_INT_PC14 ((uint)0x31+CPM_IRQ_OFFSET)
+#define SIU_INT_PC13 ((uint)0x32+CPM_IRQ_OFFSET)
+#define SIU_INT_PC12 ((uint)0x33+CPM_IRQ_OFFSET)
+#define SIU_INT_PC11 ((uint)0x34+CPM_IRQ_OFFSET)
+#define SIU_INT_PC10 ((uint)0x35+CPM_IRQ_OFFSET)
+#define SIU_INT_PC9 ((uint)0x36+CPM_IRQ_OFFSET)
+#define SIU_INT_PC8 ((uint)0x37+CPM_IRQ_OFFSET)
+#define SIU_INT_PC7 ((uint)0x38+CPM_IRQ_OFFSET)
+#define SIU_INT_PC6 ((uint)0x39+CPM_IRQ_OFFSET)
+#define SIU_INT_PC5 ((uint)0x3a+CPM_IRQ_OFFSET)
+#define SIU_INT_PC4 ((uint)0x3b+CPM_IRQ_OFFSET)
+#define SIU_INT_PC3 ((uint)0x3c+CPM_IRQ_OFFSET)
+#define SIU_INT_PC2 ((uint)0x3d+CPM_IRQ_OFFSET)
+#define SIU_INT_PC1 ((uint)0x3e+CPM_IRQ_OFFSET)
+#define SIU_INT_PC0 ((uint)0x3f+CPM_IRQ_OFFSET)
+
+static __inline__ int irq_canonicalize(int irq)
+{
+ return irq;
+}
+
+#else /* CONFIG_40x + CONFIG_8xx */
+/*
+ * this is the # irq's for all ppc arch's (pmac/chrp/prep)
+ * so it is the max of them all
+ */
+#define NR_IRQS 256
+
+#ifndef CONFIG_8260
+
+#define NUM_8259_INTERRUPTS 16
+
+#else /* CONFIG_8260 */
+
+/* The 8260 has an internal interrupt controller with a maximum of
+ * 64 IRQs. We will use NR_IRQs from above since it is large enough.
+ * Don't be confused by the 8260 documentation where they list an
+ * "interrupt number" and "interrupt vector". We are only interested
+ * in the interrupt vector. There are "reserved" holes where the
+ * vector number increases, but the interrupt number in the table does not.
+ * (Document errata updates have fixed this...make sure you have up to
+ * date processor documentation -- Dan).
+ */
+
+#ifndef CPM_IRQ_OFFSET
+#define CPM_IRQ_OFFSET 0
+#endif
+
+#define NR_CPM_INTS 64
+
+#define SIU_INT_ERROR ((uint)0x00 + CPM_IRQ_OFFSET)
+#define SIU_INT_I2C ((uint)0x01 + CPM_IRQ_OFFSET)
+#define SIU_INT_SPI ((uint)0x02 + CPM_IRQ_OFFSET)
+#define SIU_INT_RISC ((uint)0x03 + CPM_IRQ_OFFSET)
+#define SIU_INT_SMC1 ((uint)0x04 + CPM_IRQ_OFFSET)
+#define SIU_INT_SMC2 ((uint)0x05 + CPM_IRQ_OFFSET)
+#define SIU_INT_IDMA1 ((uint)0x06 + CPM_IRQ_OFFSET)
+#define SIU_INT_IDMA2 ((uint)0x07 + CPM_IRQ_OFFSET)
+#define SIU_INT_IDMA3 ((uint)0x08 + CPM_IRQ_OFFSET)
+#define SIU_INT_IDMA4 ((uint)0x09 + CPM_IRQ_OFFSET)
+#define SIU_INT_SDMA ((uint)0x0a + CPM_IRQ_OFFSET)
+#define SIU_INT_TIMER1 ((uint)0x0c + CPM_IRQ_OFFSET)
+#define SIU_INT_TIMER2 ((uint)0x0d + CPM_IRQ_OFFSET)
+#define SIU_INT_TIMER3 ((uint)0x0e + CPM_IRQ_OFFSET)
+#define SIU_INT_TIMER4 ((uint)0x0f + CPM_IRQ_OFFSET)
+#define SIU_INT_TMCNT ((uint)0x10 + CPM_IRQ_OFFSET)
+#define SIU_INT_PIT ((uint)0x11 + CPM_IRQ_OFFSET)
+#define SIU_INT_IRQ1 ((uint)0x13 + CPM_IRQ_OFFSET)
+#define SIU_INT_IRQ2 ((uint)0x14 + CPM_IRQ_OFFSET)
+#define SIU_INT_IRQ3 ((uint)0x15 + CPM_IRQ_OFFSET)
+#define SIU_INT_IRQ4 ((uint)0x16 + CPM_IRQ_OFFSET)
+#define SIU_INT_IRQ5 ((uint)0x17 + CPM_IRQ_OFFSET)
+#define SIU_INT_IRQ6 ((uint)0x18 + CPM_IRQ_OFFSET)
+#define SIU_INT_IRQ7 ((uint)0x19 + CPM_IRQ_OFFSET)
+#define SIU_INT_FCC1 ((uint)0x20 + CPM_IRQ_OFFSET)
+#define SIU_INT_FCC2 ((uint)0x21 + CPM_IRQ_OFFSET)
+#define SIU_INT_FCC3 ((uint)0x22 + CPM_IRQ_OFFSET)
+#define SIU_INT_MCC1 ((uint)0x24 + CPM_IRQ_OFFSET)
+#define SIU_INT_MCC2 ((uint)0x25 + CPM_IRQ_OFFSET)
+#define SIU_INT_SCC1 ((uint)0x28 + CPM_IRQ_OFFSET)
+#define SIU_INT_SCC2 ((uint)0x29 + CPM_IRQ_OFFSET)
+#define SIU_INT_SCC3 ((uint)0x2a + CPM_IRQ_OFFSET)
+#define SIU_INT_SCC4 ((uint)0x2b + CPM_IRQ_OFFSET)
+#define SIU_INT_PC15 ((uint)0x30 + CPM_IRQ_OFFSET)
+#define SIU_INT_PC14 ((uint)0x31 + CPM_IRQ_OFFSET)
+#define SIU_INT_PC13 ((uint)0x32 + CPM_IRQ_OFFSET)
+#define SIU_INT_PC12 ((uint)0x33 + CPM_IRQ_OFFSET)
+#define SIU_INT_PC11 ((uint)0x34 + CPM_IRQ_OFFSET)
+#define SIU_INT_PC10 ((uint)0x35 + CPM_IRQ_OFFSET)
+#define SIU_INT_PC9 ((uint)0x36 + CPM_IRQ_OFFSET)
+#define SIU_INT_PC8 ((uint)0x37 + CPM_IRQ_OFFSET)
+#define SIU_INT_PC7 ((uint)0x38 + CPM_IRQ_OFFSET)
+#define SIU_INT_PC6 ((uint)0x39 + CPM_IRQ_OFFSET)
+#define SIU_INT_PC5 ((uint)0x3a + CPM_IRQ_OFFSET)
+#define SIU_INT_PC4 ((uint)0x3b + CPM_IRQ_OFFSET)
+#define SIU_INT_PC3 ((uint)0x3c + CPM_IRQ_OFFSET)
+#define SIU_INT_PC2 ((uint)0x3d + CPM_IRQ_OFFSET)
+#define SIU_INT_PC1 ((uint)0x3e + CPM_IRQ_OFFSET)
+#define SIU_INT_PC0 ((uint)0x3f + CPM_IRQ_OFFSET)
+
+#endif /* CONFIG_8260 */
+
+/*
+ * This gets called from serial.c, which is now used on
+ * powermacs as well as prep/chrp boxes.
+ * Prep and chrp both have cascaded 8259 PICs.
+ */
+static __inline__ int irq_canonicalize(int irq)
+{
+ if (ppc_md.irq_canonicalize)
+ return ppc_md.irq_canonicalize(irq);
+ return irq;
+}
+
+#endif
+
+#define NR_MASK_WORDS ((NR_IRQS + 31) / 32)
+/* pedantic: these are long because they are used with set_bit --RR */
+extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
+extern unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
+extern atomic_t ppc_n_lost_interrupts;
+
+struct irqaction;
+struct pt_regs;
+int handle_IRQ_event(unsigned int, struct pt_regs *, struct irqaction *);
+
+#endif /* _ASM_IRQ_H */
+#endif /* __KERNEL__ */