summaryrefslogtreecommitdiffstats
path: root/include/asm-ppc/ppc4xx_dma.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-ppc/ppc4xx_dma.h')
-rw-r--r--include/asm-ppc/ppc4xx_dma.h579
1 files changed, 0 insertions, 579 deletions
diff --git a/include/asm-ppc/ppc4xx_dma.h b/include/asm-ppc/ppc4xx_dma.h
deleted file mode 100644
index 935d1e05366..00000000000
--- a/include/asm-ppc/ppc4xx_dma.h
+++ /dev/null
@@ -1,579 +0,0 @@
-/*
- * include/asm-ppc/ppc4xx_dma.h
- *
- * IBM PPC4xx DMA engine library
- *
- * Copyright 2000-2004 MontaVista Software Inc.
- *
- * Cleaned up a bit more, Matt Porter <mporter@kernel.crashing.org>
- *
- * Original code by Armin Kuster <akuster@mvista.com>
- * and Pete Popov <ppopov@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASMPPC_PPC4xx_DMA_H
-#define __ASMPPC_PPC4xx_DMA_H
-
-#include <linux/types.h>
-#include <asm/mmu.h>
-#include <asm/ibm4xx.h>
-
-#undef DEBUG_4xxDMA
-
-#define MAX_PPC4xx_DMA_CHANNELS 4
-
-/*
- * Function return status codes
- * These values are used to indicate whether or not the function
- * call was successful, or a bad/invalid parameter was passed.
- */
-#define DMA_STATUS_GOOD 0
-#define DMA_STATUS_BAD_CHANNEL 1
-#define DMA_STATUS_BAD_HANDLE 2
-#define DMA_STATUS_BAD_MODE 3
-#define DMA_STATUS_NULL_POINTER 4
-#define DMA_STATUS_OUT_OF_MEMORY 5
-#define DMA_STATUS_SGL_LIST_EMPTY 6
-#define DMA_STATUS_GENERAL_ERROR 7
-#define DMA_STATUS_CHANNEL_NOTFREE 8
-
-#define DMA_CHANNEL_BUSY 0x80000000
-
-/*
- * These indicate status as returned from the DMA Status Register.
- */
-#define DMA_STATUS_NO_ERROR 0
-#define DMA_STATUS_CS 1 /* Count Status */
-#define DMA_STATUS_TS 2 /* Transfer Status */
-#define DMA_STATUS_DMA_ERROR 3 /* DMA Error Occurred */
-#define DMA_STATUS_DMA_BUSY 4 /* The channel is busy */
-
-
-/*
- * DMA Channel Control Registers
- */
-
-#ifdef CONFIG_44x
-#define PPC4xx_DMA_64BIT
-#define DMA_CR_OFFSET 1
-#else
-#define DMA_CR_OFFSET 0
-#endif
-
-#define DMA_CE_ENABLE (1<<31) /* DMA Channel Enable */
-#define SET_DMA_CE_ENABLE(x) (((x)&0x1)<<31)
-#define GET_DMA_CE_ENABLE(x) (((x)&DMA_CE_ENABLE)>>31)
-
-#define DMA_CIE_ENABLE (1<<30) /* DMA Channel Interrupt Enable */
-#define SET_DMA_CIE_ENABLE(x) (((x)&0x1)<<30)
-#define GET_DMA_CIE_ENABLE(x) (((x)&DMA_CIE_ENABLE)>>30)
-
-#define DMA_TD (1<<29)
-#define SET_DMA_TD(x) (((x)&0x1)<<29)
-#define GET_DMA_TD(x) (((x)&DMA_TD)>>29)
-
-#define DMA_PL (1<<28) /* Peripheral Location */
-#define SET_DMA_PL(x) (((x)&0x1)<<28)
-#define GET_DMA_PL(x) (((x)&DMA_PL)>>28)
-
-#define EXTERNAL_PERIPHERAL 0
-#define INTERNAL_PERIPHERAL 1
-
-#define SET_DMA_PW(x) (((x)&0x3)<<(26-DMA_CR_OFFSET)) /* Peripheral Width */
-#define DMA_PW_MASK SET_DMA_PW(3)
-#define PW_8 0
-#define PW_16 1
-#define PW_32 2
-#define PW_64 3
-/* FIXME: Add PW_128 support for 440GP DMA block */
-#define GET_DMA_PW(x) (((x)&DMA_PW_MASK)>>(26-DMA_CR_OFFSET))
-
-#define DMA_DAI (1<<(25-DMA_CR_OFFSET)) /* Destination Address Increment */
-#define SET_DMA_DAI(x) (((x)&0x1)<<(25-DMA_CR_OFFSET))
-
-#define DMA_SAI (1<<(24-DMA_CR_OFFSET)) /* Source Address Increment */
-#define SET_DMA_SAI(x) (((x)&0x1)<<(24-DMA_CR_OFFSET))
-
-#define DMA_BEN (1<<(23-DMA_CR_OFFSET)) /* Buffer Enable */
-#define SET_DMA_BEN(x) (((x)&0x1)<<(23-DMA_CR_OFFSET))
-
-#define SET_DMA_TM(x) (((x)&0x3)<<(21-DMA_CR_OFFSET)) /* Transfer Mode */
-#define DMA_TM_MASK SET_DMA_TM(3)
-#define TM_PERIPHERAL 0 /* Peripheral */
-#define TM_RESERVED 1 /* Reserved */
-#define TM_S_MM 2 /* Memory to Memory */
-#define TM_D_MM 3 /* Device Paced Memory to Memory */
-#define GET_DMA_TM(x) (((x)&DMA_TM_MASK)>>(21-DMA_CR_OFFSET))
-
-#define SET_DMA_PSC(x) (((x)&0x3)<<(19-DMA_CR_OFFSET)) /* Peripheral Setup Cycles */
-#define DMA_PSC_MASK SET_DMA_PSC(3)
-#define GET_DMA_PSC(x) (((x)&DMA_PSC_MASK)>>(19-DMA_CR_OFFSET))
-
-#define SET_DMA_PWC(x) (((x)&0x3F)<<(13-DMA_CR_OFFSET)) /* Peripheral Wait Cycles */
-#define DMA_PWC_MASK SET_DMA_PWC(0x3F)
-#define GET_DMA_PWC(x) (((x)&DMA_PWC_MASK)>>(13-DMA_CR_OFFSET))
-
-#define SET_DMA_PHC(x) (((x)&0x7)<<(10-DMA_CR_OFFSET)) /* Peripheral Hold Cycles */
-#define DMA_PHC_MASK SET_DMA_PHC(0x7)
-#define GET_DMA_PHC(x) (((x)&DMA_PHC_MASK)>>(10-DMA_CR_OFFSET))
-
-#define DMA_ETD_OUTPUT (1<<(9-DMA_CR_OFFSET)) /* EOT pin is a TC output */
-#define SET_DMA_ETD(x) (((x)&0x1)<<(9-DMA_CR_OFFSET))
-
-#define DMA_TCE_ENABLE (1<<(8-DMA_CR_OFFSET))
-#define SET_DMA_TCE(x) (((x)&0x1)<<(8-DMA_CR_OFFSET))
-
-#define DMA_DEC (1<<(2)) /* Address Decrement */
-#define SET_DMA_DEC(x) (((x)&0x1)<<2)
-#define GET_DMA_DEC(x) (((x)&DMA_DEC)>>2)
-
-
-/*
- * Transfer Modes
- * These modes are defined in a way that makes it possible to
- * simply "or" in the value in the control register.
- */
-
-#define DMA_MODE_MM (SET_DMA_TM(TM_S_MM)) /* memory to memory */
-
- /* Device-paced memory to memory, */
- /* device is at source address */
-#define DMA_MODE_MM_DEVATSRC (DMA_TD | SET_DMA_TM(TM_D_MM))
-
- /* Device-paced memory to memory, */
- /* device is at destination address */
-#define DMA_MODE_MM_DEVATDST (SET_DMA_TM(TM_D_MM))
-
-/* 405gp/440gp */
-#define SET_DMA_PREFETCH(x) (((x)&0x3)<<(4-DMA_CR_OFFSET)) /* Memory Read Prefetch */
-#define DMA_PREFETCH_MASK SET_DMA_PREFETCH(3)
-#define PREFETCH_1 0 /* Prefetch 1 Double Word */
-#define PREFETCH_2 1
-#define PREFETCH_4 2
-#define GET_DMA_PREFETCH(x) (((x)&DMA_PREFETCH_MASK)>>(4-DMA_CR_OFFSET))
-
-#define DMA_PCE (1<<(3-DMA_CR_OFFSET)) /* Parity Check Enable */
-#define SET_DMA_PCE(x) (((x)&0x1)<<(3-DMA_CR_OFFSET))
-#define GET_DMA_PCE(x) (((x)&DMA_PCE)>>(3-DMA_CR_OFFSET))
-
-/* stb3x */
-
-#define DMA_ECE_ENABLE (1<<5)
-#define SET_DMA_ECE(x) (((x)&0x1)<<5)
-#define GET_DMA_ECE(x) (((x)&DMA_ECE_ENABLE)>>5)
-
-#define DMA_TCD_DISABLE (1<<4)
-#define SET_DMA_TCD(x) (((x)&0x1)<<4)
-#define GET_DMA_TCD(x) (((x)&DMA_TCD_DISABLE)>>4)
-
-typedef uint32_t sgl_handle_t;
-
-#ifdef CONFIG_PPC4xx_EDMA
-
-#define SGL_LIST_SIZE 4096
-#define DMA_PPC4xx_SIZE SGL_LIST_SIZE
-
-#define SET_DMA_PRIORITY(x) (((x)&0x3)<<(6-DMA_CR_OFFSET)) /* DMA Channel Priority */
-#define DMA_PRIORITY_MASK SET_DMA_PRIORITY(3)
-#define PRIORITY_LOW 0
-#define PRIORITY_MID_LOW 1
-#define PRIORITY_MID_HIGH 2
-#define PRIORITY_HIGH 3
-#define GET_DMA_PRIORITY(x) (((x)&DMA_PRIORITY_MASK)>>(6-DMA_CR_OFFSET))
-
-/*
- * DMA Polarity Configuration Register
- */
-#define DMAReq_ActiveLow(chan) (1<<(31-(chan*3)))
-#define DMAAck_ActiveLow(chan) (1<<(30-(chan*3)))
-#define EOT_ActiveLow(chan) (1<<(29-(chan*3))) /* End of Transfer */
-
-/*
- * DMA Sleep Mode Register
- */
-#define SLEEP_MODE_ENABLE (1<<21)
-
-/*
- * DMA Status Register
- */
-#define DMA_CS0 (1<<31) /* Terminal Count has been reached */
-#define DMA_CS1 (1<<30)
-#define DMA_CS2 (1<<29)
-#define DMA_CS3 (1<<28)
-
-#define DMA_TS0 (1<<27) /* End of Transfer has been requested */
-#define DMA_TS1 (1<<26)
-#define DMA_TS2 (1<<25)
-#define DMA_TS3 (1<<24)
-
-#define DMA_CH0_ERR (1<<23) /* DMA Chanel 0 Error */
-#define DMA_CH1_ERR (1<<22)
-#define DMA_CH2_ERR (1<<21)
-#define DMA_CH3_ERR (1<<20)
-
-#define DMA_IN_DMA_REQ0 (1<<19) /* Internal DMA Request is pending */
-#define DMA_IN_DMA_REQ1 (1<<18)
-#define DMA_IN_DMA_REQ2 (1<<17)
-#define DMA_IN_DMA_REQ3 (1<<16)
-
-#define DMA_EXT_DMA_REQ0 (1<<15) /* External DMA Request is pending */
-#define DMA_EXT_DMA_REQ1 (1<<14)
-#define DMA_EXT_DMA_REQ2 (1<<13)
-#define DMA_EXT_DMA_REQ3 (1<<12)
-
-#define DMA_CH0_BUSY (1<<11) /* DMA Channel 0 Busy */
-#define DMA_CH1_BUSY (1<<10)
-#define DMA_CH2_BUSY (1<<9)
-#define DMA_CH3_BUSY (1<<8)
-
-#define DMA_SG0 (1<<7) /* DMA Channel 0 Scatter/Gather in progress */
-#define DMA_SG1 (1<<6)
-#define DMA_SG2 (1<<5)
-#define DMA_SG3 (1<<4)
-
-/* DMA Channel Count Register */
-#define DMA_CTC_BTEN (1<<23) /* Burst Enable/Disable bit */
-#define DMA_CTC_BSIZ_MSK (3<<21) /* Mask of the Burst size bits */
-#define DMA_CTC_BSIZ_2 (0)
-#define DMA_CTC_BSIZ_4 (1<<21)
-#define DMA_CTC_BSIZ_8 (2<<21)
-#define DMA_CTC_BSIZ_16 (3<<21)
-
-/*
- * DMA SG Command Register
- */
-#define SSG_ENABLE(chan) (1<<(31-chan)) /* Start Scatter Gather */
-#define SSG_MASK_ENABLE(chan) (1<<(15-chan)) /* Enable writing to SSG0 bit */
-
-/*
- * DMA Scatter/Gather Descriptor Bit fields
- */
-#define SG_LINK (1<<31) /* Link */
-#define SG_TCI_ENABLE (1<<29) /* Enable Terminal Count Interrupt */
-#define SG_ETI_ENABLE (1<<28) /* Enable End of Transfer Interrupt */
-#define SG_ERI_ENABLE (1<<27) /* Enable Error Interrupt */
-#define SG_COUNT_MASK 0xFFFF /* Count Field */
-
-#define SET_DMA_CONTROL \
- (SET_DMA_CIE_ENABLE(p_init->int_enable) | /* interrupt enable */ \
- SET_DMA_BEN(p_init->buffer_enable) | /* buffer enable */\
- SET_DMA_ETD(p_init->etd_output) | /* end of transfer pin */ \
- SET_DMA_TCE(p_init->tce_enable) | /* terminal count enable */ \
- SET_DMA_PL(p_init->pl) | /* peripheral location */ \
- SET_DMA_DAI(p_init->dai) | /* dest addr increment */ \
- SET_DMA_SAI(p_init->sai) | /* src addr increment */ \
- SET_DMA_PRIORITY(p_init->cp) | /* channel priority */ \
- SET_DMA_PW(p_init->pwidth) | /* peripheral/bus width */ \
- SET_DMA_PSC(p_init->psc) | /* peripheral setup cycles */ \
- SET_DMA_PWC(p_init->pwc) | /* peripheral wait cycles */ \
- SET_DMA_PHC(p_init->phc) | /* peripheral hold cycles */ \
- SET_DMA_PREFETCH(p_init->pf) /* read prefetch */)
-
-#define GET_DMA_POLARITY(chan) (DMAReq_ActiveLow(chan) | DMAAck_ActiveLow(chan) | EOT_ActiveLow(chan))
-
-#elif defined(CONFIG_STB03xxx) /* stb03xxx */
-
-#define DMA_PPC4xx_SIZE 4096
-
-/*
- * DMA Status Register
- */
-
-#define SET_DMA_PRIORITY(x) (((x)&0x00800001)) /* DMA Channel Priority */
-#define DMA_PRIORITY_MASK 0x00800001
-#define PRIORITY_LOW 0x00000000
-#define PRIORITY_MID_LOW 0x00000001
-#define PRIORITY_MID_HIGH 0x00800000
-#define PRIORITY_HIGH 0x00800001
-#define GET_DMA_PRIORITY(x) (((((x)&DMA_PRIORITY_MASK) &0x00800000) >> 22 ) | (((x)&DMA_PRIORITY_MASK) &0x00000001))
-
-#define DMA_CS0 (1<<31) /* Terminal Count has been reached */
-#define DMA_CS1 (1<<30)
-#define DMA_CS2 (1<<29)
-#define DMA_CS3 (1<<28)
-
-#define DMA_TS0 (1<<27) /* End of Transfer has been requested */
-#define DMA_TS1 (1<<26)
-#define DMA_TS2 (1<<25)
-#define DMA_TS3 (1<<24)
-
-#define DMA_CH0_ERR (1<<23) /* DMA Chanel 0 Error */
-#define DMA_CH1_ERR (1<<22)
-#define DMA_CH2_ERR (1<<21)
-#define DMA_CH3_ERR (1<<20)
-
-#define DMA_CT0 (1<<19) /* Chained transfere */
-
-#define DMA_IN_DMA_REQ0 (1<<18) /* Internal DMA Request is pending */
-#define DMA_IN_DMA_REQ1 (1<<17)
-#define DMA_IN_DMA_REQ2 (1<<16)
-#define DMA_IN_DMA_REQ3 (1<<15)
-
-#define DMA_EXT_DMA_REQ0 (1<<14) /* External DMA Request is pending */
-#define DMA_EXT_DMA_REQ1 (1<<13)
-#define DMA_EXT_DMA_REQ2 (1<<12)
-#define DMA_EXT_DMA_REQ3 (1<<11)
-
-#define DMA_CH0_BUSY (1<<10) /* DMA Channel 0 Busy */
-#define DMA_CH1_BUSY (1<<9)
-#define DMA_CH2_BUSY (1<<8)
-#define DMA_CH3_BUSY (1<<7)
-
-#define DMA_CT1 (1<<6) /* Chained transfere */
-#define DMA_CT2 (1<<5)
-#define DMA_CT3 (1<<4)
-
-#define DMA_CH_ENABLE (1<<7)
-#define SET_DMA_CH(x) (((x)&0x1)<<7)
-#define GET_DMA_CH(x) (((x)&DMA_CH_ENABLE)>>7)
-
-/* STBx25xxx dma unique */
-/* enable device port on a dma channel
- * example ext 0 on dma 1
- */
-
-#define SSP0_RECV 15
-#define SSP0_XMIT 14
-#define EXT_DMA_0 12
-#define SC1_XMIT 11
-#define SC1_RECV 10
-#define EXT_DMA_2 9
-#define EXT_DMA_3 8
-#define SERIAL2_XMIT 7
-#define SERIAL2_RECV 6
-#define SC0_XMIT 5
-#define SC0_RECV 4
-#define SERIAL1_XMIT 3
-#define SERIAL1_RECV 2
-#define SERIAL0_XMIT 1
-#define SERIAL0_RECV 0
-
-#define DMA_CHAN_0 1
-#define DMA_CHAN_1 2
-#define DMA_CHAN_2 3
-#define DMA_CHAN_3 4
-
-/* end STBx25xx */
-
-/*
- * Bit 30 must be one for Redwoods, otherwise transfers may receive errors.
- */
-#define DMA_CR_MB0 0x2
-
-#define SET_DMA_CONTROL \
- (SET_DMA_CIE_ENABLE(p_init->int_enable) | /* interrupt enable */ \
- SET_DMA_ETD(p_init->etd_output) | /* end of transfer pin */ \
- SET_DMA_TCE(p_init->tce_enable) | /* terminal count enable */ \
- SET_DMA_PL(p_init->pl) | /* peripheral location */ \
- SET_DMA_DAI(p_init->dai) | /* dest addr increment */ \
- SET_DMA_SAI(p_init->sai) | /* src addr increment */ \
- SET_DMA_PRIORITY(p_init->cp) | /* channel priority */ \
- SET_DMA_PW(p_init->pwidth) | /* peripheral/bus width */ \
- SET_DMA_PSC(p_init->psc) | /* peripheral setup cycles */ \
- SET_DMA_PWC(p_init->pwc) | /* peripheral wait cycles */ \
- SET_DMA_PHC(p_init->phc) | /* peripheral hold cycles */ \
- SET_DMA_TCD(p_init->tcd_disable) | /* TC chain mode disable */ \
- SET_DMA_ECE(p_init->ece_enable) | /* ECE chanin mode enable */ \
- SET_DMA_CH(p_init->ch_enable) | /* Chain enable */ \
- DMA_CR_MB0 /* must be one */)
-
-#define GET_DMA_POLARITY(chan) chan
-
-#endif
-
-typedef struct {
- unsigned short in_use; /* set when channel is being used, clr when
- * available.
- */
- /*
- * Valid polarity settings:
- * DMAReq_ActiveLow(n)
- * DMAAck_ActiveLow(n)
- * EOT_ActiveLow(n)
- *
- * n is 0 to max dma chans
- */
- unsigned int polarity;
-
- char buffer_enable; /* Boolean: buffer enable */
- char tce_enable; /* Boolean: terminal count enable */
- char etd_output; /* Boolean: eot pin is a tc output */
- char pce; /* Boolean: parity check enable */
-
- /*
- * Peripheral location:
- * INTERNAL_PERIPHERAL (UART0 on the 405GP)
- * EXTERNAL_PERIPHERAL
- */
- char pl; /* internal/external peripheral */
-
- /*
- * Valid pwidth settings:
- * PW_8
- * PW_16
- * PW_32
- * PW_64
- */
- unsigned int pwidth;
-
- char dai; /* Boolean: dst address increment */
- char sai; /* Boolean: src address increment */
-
- /*
- * Valid psc settings: 0-3
- */
- unsigned int psc; /* Peripheral Setup Cycles */
-
- /*
- * Valid pwc settings:
- * 0-63
- */
- unsigned int pwc; /* Peripheral Wait Cycles */
-
- /*
- * Valid phc settings:
- * 0-7
- */
- unsigned int phc; /* Peripheral Hold Cycles */
-
- /*
- * Valid cp (channel priority) settings:
- * PRIORITY_LOW
- * PRIORITY_MID_LOW
- * PRIORITY_MID_HIGH
- * PRIORITY_HIGH
- */
- unsigned int cp; /* channel priority */
-
- /*
- * Valid pf (memory read prefetch) settings:
- *
- * PREFETCH_1
- * PREFETCH_2
- * PREFETCH_4
- */
- unsigned int pf; /* memory read prefetch */
-
- /*
- * Boolean: channel interrupt enable
- * NOTE: for sgl transfers, only the last descriptor will be setup to
- * interrupt.
- */
- char int_enable;
-
- char shift; /* easy access to byte_count shift, based on */
- /* the width of the channel */
-
- uint32_t control; /* channel control word */
-
- /* These variabled are used ONLY in single dma transfers */
- unsigned int mode; /* transfer mode */
- phys_addr_t addr;
- char ce; /* channel enable */
-#ifdef CONFIG_STB03xxx
- char ch_enable;
- char tcd_disable;
- char ece_enable;
- char td; /* transfer direction */
-#endif
-
- char int_on_final_sg;/* for scatter/gather - only interrupt on last sg */
-} ppc_dma_ch_t;
-
-/*
- * PPC44x DMA implementations have a slightly different
- * descriptor layout. Probably moved about due to the
- * change to 64-bit addresses and link pointer. I don't
- * know why they didn't just leave control_count after
- * the dst_addr.
- */
-#ifdef PPC4xx_DMA_64BIT
-typedef struct {
- uint32_t control;
- uint32_t control_count;
- phys_addr_t src_addr;
- phys_addr_t dst_addr;
- phys_addr_t next;
-} ppc_sgl_t;
-#else
-typedef struct {
- uint32_t control;
- phys_addr_t src_addr;
- phys_addr_t dst_addr;
- uint32_t control_count;
- uint32_t next;
-} ppc_sgl_t;
-#endif
-
-typedef struct {
- unsigned int dmanr;
- uint32_t control; /* channel ctrl word; loaded from each descrptr */
- uint32_t sgl_control; /* LK, TCI, ETI, and ERI bits in sgl descriptor */
- dma_addr_t dma_addr; /* dma (physical) address of this list */
- ppc_sgl_t *phead;
- dma_addr_t phead_dma;
- ppc_sgl_t *ptail;
- dma_addr_t ptail_dma;
-} sgl_list_info_t;
-
-typedef struct {
- phys_addr_t *src_addr;
- phys_addr_t *dst_addr;
- phys_addr_t dma_src_addr;
- phys_addr_t dma_dst_addr;
-} pci_alloc_desc_t;
-
-extern ppc_dma_ch_t dma_channels[];
-
-/*
- * The DMA API are in ppc4xx_dma.c and ppc4xx_sgdma.c
- */
-extern int ppc4xx_init_dma_channel(unsigned int, ppc_dma_ch_t *);
-extern int ppc4xx_get_channel_config(unsigned int, ppc_dma_ch_t *);
-extern int ppc4xx_set_channel_priority(unsigned int, unsigned int);
-extern unsigned int ppc4xx_get_peripheral_width(unsigned int);
-extern void ppc4xx_set_sg_addr(int, phys_addr_t);
-extern int ppc4xx_add_dma_sgl(sgl_handle_t, phys_addr_t, phys_addr_t, unsigned int);
-extern void ppc4xx_enable_dma_sgl(sgl_handle_t);
-extern void ppc4xx_disable_dma_sgl(sgl_handle_t);
-extern int ppc4xx_get_dma_sgl_residue(sgl_handle_t, phys_addr_t *, phys_addr_t *);
-extern int ppc4xx_delete_dma_sgl_element(sgl_handle_t, phys_addr_t *, phys_addr_t *);
-extern int ppc4xx_alloc_dma_handle(sgl_handle_t *, unsigned int, unsigned int);
-extern void ppc4xx_free_dma_handle(sgl_handle_t);
-extern int ppc4xx_get_dma_status(void);
-extern int ppc4xx_enable_burst(unsigned int);
-extern int ppc4xx_disable_burst(unsigned int);
-extern int ppc4xx_set_burst_size(unsigned int, unsigned int);
-extern void ppc4xx_set_src_addr(int dmanr, phys_addr_t src_addr);
-extern void ppc4xx_set_dst_addr(int dmanr, phys_addr_t dst_addr);
-extern void ppc4xx_enable_dma(unsigned int dmanr);
-extern void ppc4xx_disable_dma(unsigned int dmanr);
-extern void ppc4xx_set_dma_count(unsigned int dmanr, unsigned int count);
-extern int ppc4xx_get_dma_residue(unsigned int dmanr);
-extern void ppc4xx_set_dma_addr2(unsigned int dmanr, phys_addr_t src_dma_addr,
- phys_addr_t dst_dma_addr);
-extern int ppc4xx_enable_dma_interrupt(unsigned int dmanr);
-extern int ppc4xx_disable_dma_interrupt(unsigned int dmanr);
-extern int ppc4xx_clr_dma_status(unsigned int dmanr);
-extern int ppc4xx_map_dma_port(unsigned int dmanr, unsigned int ocp_dma,short dma_chan);
-extern int ppc4xx_disable_dma_port(unsigned int dmanr, unsigned int ocp_dma,short dma_chan);
-extern int ppc4xx_set_dma_mode(unsigned int dmanr, unsigned int mode);
-
-/* These are in kernel/dma.c: */
-
-/* reserve a DMA channel */
-extern int request_dma(unsigned int dmanr, const char *device_id);
-/* release it again */
-extern void free_dma(unsigned int dmanr);
-#endif
-#endif /* __KERNEL__ */
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-02 01:24:42 +0000