diff options
Diffstat (limited to 'include/asm-ppc')
73 files changed, 93 insertions, 6805 deletions
diff --git a/include/asm-ppc/a.out.h b/include/asm-ppc/a.out.h deleted file mode 100644 index 8979a94c4a8..00000000000 --- a/include/asm-ppc/a.out.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef __PPC_A_OUT_H__ -#define __PPC_A_OUT_H__ - -/* grabbed from the intel stuff */ -#define STACK_TOP TASK_SIZE - - -struct exec -{ - unsigned long a_info; /* Use macros N_MAGIC, etc for access */ - unsigned a_text; /* length of text, in bytes */ - unsigned a_data; /* length of data, in bytes */ - unsigned a_bss; /* length of uninitialized data area for file, in bytes */ - unsigned a_syms; /* length of symbol table data in file, in bytes */ - unsigned a_entry; /* start address */ - unsigned a_trsize; /* length of relocation info for text, in bytes */ - unsigned a_drsize; /* length of relocation info for data, in bytes */ -}; - - -#define N_TRSIZE(a) ((a).a_trsize) -#define N_DRSIZE(a) ((a).a_drsize) -#define N_SYMSIZE(a) ((a).a_syms) - - -#endif diff --git a/include/asm-ppc/atomic.h b/include/asm-ppc/atomic.h deleted file mode 100644 index eeafd505836..00000000000 --- a/include/asm-ppc/atomic.h +++ /dev/null @@ -1,214 +0,0 @@ -/* - * PowerPC atomic operations - */ - -#ifndef _ASM_PPC_ATOMIC_H_ -#define _ASM_PPC_ATOMIC_H_ - -typedef struct { volatile int counter; } atomic_t; - -#ifdef __KERNEL__ - -#define ATOMIC_INIT(i) { (i) } - -#define atomic_read(v) ((v)->counter) -#define atomic_set(v,i) (((v)->counter) = (i)) - -extern void atomic_clear_mask(unsigned long mask, unsigned long *addr); - -#ifdef CONFIG_SMP -#define SMP_SYNC "sync" -#define SMP_ISYNC "\n\tisync" -#else -#define SMP_SYNC "" -#define SMP_ISYNC -#endif - -/* Erratum #77 on the 405 means we need a sync or dcbt before every stwcx. - * The old ATOMIC_SYNC_FIX covered some but not all of this. - */ -#ifdef CONFIG_IBM405_ERR77 -#define PPC405_ERR77(ra,rb) "dcbt " #ra "," #rb ";" -#else -#define PPC405_ERR77(ra,rb) -#endif - -static __inline__ void atomic_add(int a, atomic_t *v) -{ - int t; - - __asm__ __volatile__( -"1: lwarx %0,0,%3 # atomic_add\n\ - add %0,%2,%0\n" - PPC405_ERR77(0,%3) -" stwcx. %0,0,%3 \n\ - bne- 1b" - : "=&r" (t), "=m" (v->counter) - : "r" (a), "r" (&v->counter), "m" (v->counter) - : "cc"); -} - -static __inline__ int atomic_add_return(int a, atomic_t *v) -{ - int t; - - __asm__ __volatile__( -"1: lwarx %0,0,%2 # atomic_add_return\n\ - add %0,%1,%0\n" - PPC405_ERR77(0,%2) -" stwcx. %0,0,%2 \n\ - bne- 1b" - SMP_ISYNC - : "=&r" (t) - : "r" (a), "r" (&v->counter) - : "cc", "memory"); - - return t; -} - -#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) - -static __inline__ void atomic_sub(int a, atomic_t *v) -{ - int t; - - __asm__ __volatile__( -"1: lwarx %0,0,%3 # atomic_sub\n\ - subf %0,%2,%0\n" - PPC405_ERR77(0,%3) -" stwcx. %0,0,%3 \n\ - bne- 1b" - : "=&r" (t), "=m" (v->counter) - : "r" (a), "r" (&v->counter), "m" (v->counter) - : "cc"); -} - -static __inline__ int atomic_sub_return(int a, atomic_t *v) -{ - int t; - - __asm__ __volatile__( -"1: lwarx %0,0,%2 # atomic_sub_return\n\ - subf %0,%1,%0\n" - PPC405_ERR77(0,%2) -" stwcx. %0,0,%2 \n\ - bne- 1b" - SMP_ISYNC - : "=&r" (t) - : "r" (a), "r" (&v->counter) - : "cc", "memory"); - - return t; -} - -static __inline__ void atomic_inc(atomic_t *v) -{ - int t; - - __asm__ __volatile__( -"1: lwarx %0,0,%2 # atomic_inc\n\ - addic %0,%0,1\n" - PPC405_ERR77(0,%2) -" stwcx. %0,0,%2 \n\ - bne- 1b" - : "=&r" (t), "=m" (v->counter) - : "r" (&v->counter), "m" (v->counter) - : "cc"); -} - -static __inline__ int atomic_inc_return(atomic_t *v) -{ - int t; - - __asm__ __volatile__( -"1: lwarx %0,0,%1 # atomic_inc_return\n\ - addic %0,%0,1\n" - PPC405_ERR77(0,%1) -" stwcx. %0,0,%1 \n\ - bne- 1b" - SMP_ISYNC - : "=&r" (t) - : "r" (&v->counter) - : "cc", "memory"); - - return t; -} - -/* - * atomic_inc_and_test - increment and test - * @v: pointer of type atomic_t - * - * Atomically increments @v by 1 - * and returns true if the result is zero, or false for all - * other cases. - */ -#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0) - -static __inline__ void atomic_dec(atomic_t *v) -{ - int t; - - __asm__ __volatile__( -"1: lwarx %0,0,%2 # atomic_dec\n\ - addic %0,%0,-1\n" - PPC405_ERR77(0,%2)\ -" stwcx. %0,0,%2\n\ - bne- 1b" - : "=&r" (t), "=m" (v->counter) - : "r" (&v->counter), "m" (v->counter) - : "cc"); -} - -static __inline__ int atomic_dec_return(atomic_t *v) -{ - int t; - - __asm__ __volatile__( -"1: lwarx %0,0,%1 # atomic_dec_return\n\ - addic %0,%0,-1\n" - PPC405_ERR77(0,%1) -" stwcx. %0,0,%1\n\ - bne- 1b" - SMP_ISYNC - : "=&r" (t) - : "r" (&v->counter) - : "cc", "memory"); - - return t; -} - -#define atomic_sub_and_test(a, v) (atomic_sub_return((a), (v)) == 0) -#define atomic_dec_and_test(v) (atomic_dec_return((v)) == 0) - -/* - * Atomically test *v and decrement if it is greater than 0. - * The function returns the old value of *v minus 1. - */ -static __inline__ int atomic_dec_if_positive(atomic_t *v) -{ - int t; - - __asm__ __volatile__( -"1: lwarx %0,0,%1 # atomic_dec_if_positive\n\ - addic. %0,%0,-1\n\ - blt- 2f\n" - PPC405_ERR77(0,%1) -" stwcx. %0,0,%1\n\ - bne- 1b" - SMP_ISYNC - "\n\ -2:" : "=&r" (t) - : "r" (&v->counter) - : "cc", "memory"); - - return t; -} - -#define __MB __asm__ __volatile__ (SMP_SYNC : : : "memory") -#define smp_mb__before_atomic_dec() __MB -#define smp_mb__after_atomic_dec() __MB -#define smp_mb__before_atomic_inc() __MB -#define smp_mb__after_atomic_inc() __MB - -#endif /* __KERNEL__ */ -#endif /* _ASM_PPC_ATOMIC_H_ */ diff --git a/include/asm-ppc/auxvec.h b/include/asm-ppc/auxvec.h deleted file mode 100644 index 172358df29c..00000000000 --- a/include/asm-ppc/auxvec.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef __PPC_AUXVEC_H -#define __PPC_AUXVEC_H - -/* - * We need to put in some extra aux table entries to tell glibc what - * the cache block size is, so it can use the dcbz instruction safely. - */ -#define AT_DCACHEBSIZE 19 -#define AT_ICACHEBSIZE 20 -#define AT_UCACHEBSIZE 21 -/* A special ignored type value for PPC, for glibc compatibility. */ -#define AT_IGNOREPPC 22 - -#endif diff --git a/include/asm-ppc/backlight.h b/include/asm-ppc/backlight.h deleted file mode 100644 index 3a1c3dede2a..00000000000 --- a/include/asm-ppc/backlight.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Routines for handling backlight control on PowerBooks - * - * For now, implementation resides in arch/ppc/kernel/pmac_support.c - * - */ -#ifdef __KERNEL__ -#ifndef __ASM_PPC_BACKLIGHT_H -#define __ASM_PPC_BACKLIGHT_H - -/* Abstract values */ -#define BACKLIGHT_OFF 0 -#define BACKLIGHT_MIN 1 -#define BACKLIGHT_MAX 0xf - -struct backlight_controller { - int (*set_enable)(int enable, int level, void *data); - int (*set_level)(int level, void *data); -}; - -extern void register_backlight_controller(struct backlight_controller *ctrler, void *data, char *type); -extern void unregister_backlight_controller(struct backlight_controller *ctrler, void *data); - -extern int set_backlight_enable(int enable); -extern int get_backlight_enable(void); -extern int set_backlight_level(int level); -extern int get_backlight_level(void); - -#endif -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/bitops.h b/include/asm-ppc/bitops.h deleted file mode 100644 index e30f536fd83..00000000000 --- a/include/asm-ppc/bitops.h +++ /dev/null @@ -1,460 +0,0 @@ -/* - * bitops.h: Bit string operations on the ppc - */ - -#ifdef __KERNEL__ -#ifndef _PPC_BITOPS_H -#define _PPC_BITOPS_H - -#include <linux/config.h> -#include <linux/compiler.h> -#include <asm/byteorder.h> -#include <asm/atomic.h> - -/* - * The test_and_*_bit operations are taken to imply a memory barrier - * on SMP systems. - */ -#ifdef CONFIG_SMP -#define SMP_WMB "eieio\n" -#define SMP_MB "\nsync" -#else -#define SMP_WMB -#define SMP_MB -#endif /* CONFIG_SMP */ - -static __inline__ void set_bit(int nr, volatile unsigned long * addr) -{ - unsigned long old; - unsigned long mask = 1 << (nr & 0x1f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 5); - - __asm__ __volatile__("\n\ -1: lwarx %0,0,%3 \n\ - or %0,%0,%2 \n" - PPC405_ERR77(0,%3) -" stwcx. %0,0,%3 \n\ - bne- 1b" - : "=&r" (old), "=m" (*p) - : "r" (mask), "r" (p), "m" (*p) - : "cc" ); -} - -/* - * non-atomic version - */ -static __inline__ void __set_bit(int nr, volatile unsigned long *addr) -{ - unsigned long mask = 1 << (nr & 0x1f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 5); - - *p |= mask; -} - -/* - * clear_bit doesn't imply a memory barrier - */ -#define smp_mb__before_clear_bit() smp_mb() -#define smp_mb__after_clear_bit() smp_mb() - -static __inline__ void clear_bit(int nr, volatile unsigned long *addr) -{ - unsigned long old; - unsigned long mask = 1 << (nr & 0x1f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 5); - - __asm__ __volatile__("\n\ -1: lwarx %0,0,%3 \n\ - andc %0,%0,%2 \n" - PPC405_ERR77(0,%3) -" stwcx. %0,0,%3 \n\ - bne- 1b" - : "=&r" (old), "=m" (*p) - : "r" (mask), "r" (p), "m" (*p) - : "cc"); -} - -/* - * non-atomic version - */ -static __inline__ void __clear_bit(int nr, volatile unsigned long *addr) -{ - unsigned long mask = 1 << (nr & 0x1f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 5); - - *p &= ~mask; -} - -static __inline__ void change_bit(int nr, volatile unsigned long *addr) -{ - unsigned long old; - unsigned long mask = 1 << (nr & 0x1f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 5); - - __asm__ __volatile__("\n\ -1: lwarx %0,0,%3 \n\ - xor %0,%0,%2 \n" - PPC405_ERR77(0,%3) -" stwcx. %0,0,%3 \n\ - bne- 1b" - : "=&r" (old), "=m" (*p) - : "r" (mask), "r" (p), "m" (*p) - : "cc"); -} - -/* - * non-atomic version - */ -static __inline__ void __change_bit(int nr, volatile unsigned long *addr) -{ - unsigned long mask = 1 << (nr & 0x1f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 5); - - *p ^= mask; -} - -/* - * test_and_*_bit do imply a memory barrier (?) - */ -static __inline__ int test_and_set_bit(int nr, volatile unsigned long *addr) -{ - unsigned int old, t; - unsigned int mask = 1 << (nr & 0x1f); - volatile unsigned int *p = ((volatile unsigned int *)addr) + (nr >> 5); - - __asm__ __volatile__(SMP_WMB "\n\ -1: lwarx %0,0,%4 \n\ - or %1,%0,%3 \n" - PPC405_ERR77(0,%4) -" stwcx. %1,0,%4 \n\ - bne 1b" - SMP_MB - : "=&r" (old), "=&r" (t), "=m" (*p) - : "r" (mask), "r" (p), "m" (*p) - : "cc", "memory"); - - return (old & mask) != 0; -} - -/* - * non-atomic version - */ -static __inline__ int __test_and_set_bit(int nr, volatile unsigned long *addr) -{ - unsigned long mask = 1 << (nr & 0x1f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 5); - unsigned long old = *p; - - *p = old | mask; - return (old & mask) != 0; -} - -static __inline__ int test_and_clear_bit(int nr, volatile unsigned long *addr) -{ - unsigned int old, t; - unsigned int mask = 1 << (nr & 0x1f); - volatile unsigned int *p = ((volatile unsigned int *)addr) + (nr >> 5); - - __asm__ __volatile__(SMP_WMB "\n\ -1: lwarx %0,0,%4 \n\ - andc %1,%0,%3 \n" - PPC405_ERR77(0,%4) -" stwcx. %1,0,%4 \n\ - bne 1b" - SMP_MB - : "=&r" (old), "=&r" (t), "=m" (*p) - : "r" (mask), "r" (p), "m" (*p) - : "cc", "memory"); - - return (old & mask) != 0; -} - -/* - * non-atomic version - */ -static __inline__ int __test_and_clear_bit(int nr, volatile unsigned long *addr) -{ - unsigned long mask = 1 << (nr & 0x1f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 5); - unsigned long old = *p; - - *p = old & ~mask; - return (old & mask) != 0; -} - -static __inline__ int test_and_change_bit(int nr, volatile unsigned long *addr) -{ - unsigned int old, t; - unsigned int mask = 1 << (nr & 0x1f); - volatile unsigned int *p = ((volatile unsigned int *)addr) + (nr >> 5); - - __asm__ __volatile__(SMP_WMB "\n\ -1: lwarx %0,0,%4 \n\ - xor %1,%0,%3 \n" - PPC405_ERR77(0,%4) -" stwcx. %1,0,%4 \n\ - bne 1b" - SMP_MB - : "=&r" (old), "=&r" (t), "=m" (*p) - : "r" (mask), "r" (p), "m" (*p) - : "cc", "memory"); - - return (old & mask) != 0; -} - -/* - * non-atomic version - */ -static __inline__ int __test_and_change_bit(int nr, volatile unsigned long *addr) -{ - unsigned long mask = 1 << (nr & 0x1f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 5); - unsigned long old = *p; - - *p = old ^ mask; - return (old & mask) != 0; -} - -static __inline__ int test_bit(int nr, __const__ volatile unsigned long *addr) -{ - return ((addr[nr >> 5] >> (nr & 0x1f)) & 1) != 0; -} - -/* Return the bit position of the most significant 1 bit in a word */ -static __inline__ int __ilog2(unsigned long x) -{ - int lz; - - asm ("cntlzw %0,%1" : "=r" (lz) : "r" (x)); - return 31 - lz; -} - -static __inline__ int ffz(unsigned long x) -{ - if ((x = ~x) == 0) - return 32; - return __ilog2(x & -x); -} - -static inline int __ffs(unsigned long x) -{ - return __ilog2(x & -x); -} - -/* - * ffs: find first bit set. This is defined the same way as - * the libc and compiler builtin ffs routines, therefore - * differs in spirit from the above ffz (man ffs). - */ -static __inline__ int ffs(int x) -{ - return __ilog2(x & -x) + 1; -} - -/* - * fls: find last (most-significant) bit set. - * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32. - */ -static __inline__ int fls(unsigned int x) -{ - int lz; - - asm ("cntlzw %0,%1" : "=r" (lz) : "r" (x)); - return 32 - lz; -} - -/* - * hweightN: returns the hamming weight (i.e. the number - * of bits set) of a N-bit word - */ - -#define hweight32(x) generic_hweight32(x) -#define hweight16(x) generic_hweight16(x) -#define hweight8(x) generic_hweight8(x) - -/* - * Find the first bit set in a 140-bit bitmap. - * The first 100 bits are unlikely to be set. - */ -static inline int sched_find_first_bit(const unsigned long *b) -{ - if (unlikely(b[0])) - return __ffs(b[0]); - if (unlikely(b[1])) - return __ffs(b[1]) + 32; - if (unlikely(b[2])) - return __ffs(b[2]) + 64; - if (b[3]) - return __ffs(b[3]) + 96; - return __ffs(b[4]) + 128; -} - -/** - * find_next_bit - find the next set bit in a memory region - * @addr: The address to base the search on - * @offset: The bitnumber to start searching at - * @size: The maximum size to search - */ -static __inline__ unsigned long find_next_bit(const unsigned long *addr, - unsigned long size, unsigned long offset) -{ - unsigned int *p = ((unsigned int *) addr) + (offset >> 5); - unsigned int result = offset & ~31UL; - unsigned int tmp; - - if (offset >= size) - return size; - size -= result; - offset &= 31UL; - if (offset) { - tmp = *p++; - tmp &= ~0UL << offset; - if (size < 32) - goto found_first; - if (tmp) - goto found_middle; - size -= 32; - result += 32; - } - while (size >= 32) { - if ((tmp = *p++) != 0) - goto found_middle; - result += 32; - size -= 32; - } - if (!size) - return result; - tmp = *p; - -found_first: - tmp &= ~0UL >> (32 - size); - if (tmp == 0UL) /* Are any bits set? */ - return result + size; /* Nope. */ -found_middle: - return result + __ffs(tmp); -} - -/** - * find_first_bit - find the first set bit in a memory region - * @addr: The address to start the search at - * @size: The maximum size to search - * - * Returns the bit-number of the first set bit, not the number of the byte - * containing a bit. - */ -#define find_first_bit(addr, size) \ - find_next_bit((addr), (size), 0) - -/* - * This implementation of find_{first,next}_zero_bit was stolen from - * Linus' asm-alpha/bitops.h. - */ -#define find_first_zero_bit(addr, size) \ - find_next_zero_bit((addr), (size), 0) - -static __inline__ unsigned long find_next_zero_bit(const unsigned long *addr, - unsigned long size, unsigned long offset) -{ - unsigned int * p = ((unsigned int *) addr) + (offset >> 5); - unsigned int result = offset & ~31UL; - unsigned int tmp; - - if (offset >= size) - return size; - size -= result; - offset &= 31UL; - if (offset) { - tmp = *p++; - tmp |= ~0UL >> (32-offset); - if (size < 32) - goto found_first; - if (tmp != ~0U) - goto found_middle; - size -= 32; - result += 32; - } - while (size >= 32) { - if ((tmp = *p++) != ~0U) - goto found_middle; - result += 32; - size -= 32; - } - if (!size) - return result; - tmp = *p; -found_first: - tmp |= ~0UL << size; - if (tmp == ~0UL) /* Are any bits zero? */ - return result + size; /* Nope. */ -found_middle: - return result + ffz(tmp); -} - - -#define ext2_set_bit(nr, addr) __test_and_set_bit((nr) ^ 0x18, (unsigned long *)(addr)) -#define ext2_set_bit_atomic(lock, nr, addr) test_and_set_bit((nr) ^ 0x18, (unsigned long *)(addr)) -#define ext2_clear_bit(nr, addr) __test_and_clear_bit((nr) ^ 0x18, (unsigned long *)(addr)) -#define ext2_clear_bit_atomic(lock, nr, addr) test_and_clear_bit((nr) ^ 0x18, (unsigned long *)(addr)) - -static __inline__ int ext2_test_bit(int nr, __const__ void * addr) -{ - __const__ unsigned char *ADDR = (__const__ unsigned char *) addr; - - return (ADDR[nr >> 3] >> (nr & 7)) & 1; -} - -/* - * This implementation of ext2_find_{first,next}_zero_bit was stolen from - * Linus' asm-alpha/bitops.h and modified for a big-endian machine. - */ - -#define ext2_find_first_zero_bit(addr, size) \ - ext2_find_next_zero_bit((addr), (size), 0) - -static __inline__ unsigned long ext2_find_next_zero_bit(const void *addr, - unsigned long size, unsigned long offset) -{ - unsigned int *p = ((unsigned int *) addr) + (offset >> 5); - unsigned int result = offset & ~31UL; - unsigned int tmp; - - if (offset >= size) - return size; - size -= result; - offset &= 31UL; - if (offset) { - tmp = cpu_to_le32p(p++); - tmp |= ~0UL >> (32-offset); - if (size < 32) - goto found_first; - if (tmp != ~0U) - goto found_middle; - size -= 32; - result += 32; - } - while (size >= 32) { - if ((tmp = cpu_to_le32p(p++)) != ~0U) - goto found_middle; - result += 32; - size -= 32; - } - if (!size) - return result; - tmp = cpu_to_le32p(p); -found_first: - tmp |= ~0U << size; - if (tmp == ~0UL) /* Are any bits zero? */ - return result + size; /* Nope. */ -found_middle: - return result + ffz(tmp); -} - -/* Bitmap functions for the minix filesystem. */ -#define minix_test_and_set_bit(nr,addr) ext2_set_bit(nr,addr) -#define minix_set_bit(nr,addr) ((void)ext2_set_bit(nr,addr)) -#define minix_test_and_clear_bit(nr,addr) ext2_clear_bit(nr,addr) -#define minix_test_bit(nr,addr) ext2_test_bit(nr,addr) -#define minix_find_first_zero_bit(addr,size) ext2_find_first_zero_bit(addr,size) - -#endif /* _PPC_BITOPS_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/bug.h b/include/asm-ppc/bug.h deleted file mode 100644 index 8b34fd682b0..00000000000 --- a/include/asm-ppc/bug.h +++ /dev/null @@ -1,58 +0,0 @@ -#ifndef _PPC_BUG_H -#define _PPC_BUG_H - -struct bug_entry { - unsigned long bug_addr; - int line; - const char *file; - const char *function; -}; - -/* - * If this bit is set in the line number it means that the trap - * is for WARN_ON rather than BUG or BUG_ON. - */ -#define BUG_WARNING_TRAP 0x1000000 - -#ifdef CONFIG_BUG -#define BUG() do { \ - __asm__ __volatile__( \ - "1: twi 31,0,0\n" \ - ".section __bug_table,\"a\"\n\t" \ - " .long 1b,%0,%1,%2\n" \ - ".previous" \ - : : "i" (__LINE__), "i" (__FILE__), "i" (__FUNCTION__)); \ -} while (0) - -#define BUG_ON(x) do { \ - if (!__builtin_constant_p(x) || (x)) { \ - __asm__ __volatile__( \ - "1: twnei %0,0\n" \ - ".section __bug_table,\"a\"\n\t" \ - " .long 1b,%1,%2,%3\n" \ - ".previous" \ - : : "r" (x), "i" (__LINE__), "i" (__FILE__), \ - "i" (__FUNCTION__)); \ - } \ -} while (0) - -#define WARN_ON(x) do { \ - if (!__builtin_constant_p(x) || (x)) { \ - __asm__ __volatile__( \ - "1: twnei %0,0\n" \ - ".section __bug_table,\"a\"\n\t" \ - " .long 1b,%1,%2,%3\n" \ - ".previous" \ - : : "r" (x), "i" (__LINE__ + BUG_WARNING_TRAP), \ - "i" (__FILE__), "i" (__FUNCTION__)); \ - } \ -} while (0) - -#define HAVE_ARCH_BUG -#define HAVE_ARCH_BUG_ON -#define HAVE_ARCH_WARN_ON -#endif - -#include <asm-generic/bug.h> - -#endif diff --git a/include/asm-ppc/byteorder.h b/include/asm-ppc/byteorder.h deleted file mode 100644 index c63c81ec796..00000000000 --- a/include/asm-ppc/byteorder.h +++ /dev/null @@ -1,76 +0,0 @@ -#ifndef _PPC_BYTEORDER_H -#define _PPC_BYTEORDER_H - -#include <asm/types.h> -#include <linux/compiler.h> - -#ifdef __GNUC__ -#ifdef __KERNEL__ - -extern __inline__ unsigned ld_le16(const volatile unsigned short *addr) -{ - unsigned val; - - __asm__ __volatile__ ("lhbrx %0,0,%1" : "=r" (val) : "r" (addr), "m" (*addr)); - return val; -} - -extern __inline__ void st_le16(volatile unsigned short *addr, const unsigned val) -{ - __asm__ __volatile__ ("sthbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr)); -} - -extern __inline__ unsigned ld_le32(const volatile unsigned *addr) -{ - unsigned val; - - __asm__ __volatile__ ("lwbrx %0,0,%1" : "=r" (val) : "r" (addr), "m" (*addr)); - return val; -} - -extern __inline__ void st_le32(volatile unsigned *addr, const unsigned val) -{ - __asm__ __volatile__ ("stwbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr)); -} - -static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 value) -{ - __u16 result; - - __asm__("rlwimi %0,%2,8,16,23" : "=&r" (result) : "0" (value >> 8), "r" (value)); - return result; -} - -static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 value) -{ - __u32 result; - - __asm__("rlwimi %0,%2,24,16,23" : "=&r" (result) : "0" (value>>24), "r" (value)); - __asm__("rlwimi %0,%2,8,8,15" : "=&r" (result) : "0" (result), "r" (value)); - __asm__("rlwimi %0,%2,24,0,7" : "=&r" (result) : "0" (result), "r" (value)); - - return result; -} -#define __arch__swab32(x) ___arch__swab32(x) -#define __arch__swab16(x) ___arch__swab16(x) - -/* The same, but returns converted value from the location pointer by addr. */ -#define __arch__swab16p(addr) ld_le16(addr) -#define __arch__swab32p(addr) ld_le32(addr) - -/* The same, but do the conversion in situ, ie. put the value back to addr. */ -#define __arch__swab16s(addr) st_le16(addr,*addr) -#define __arch__swab32s(addr) st_le32(addr,*addr) - -#endif /* __KERNEL__ */ - -#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) -# define __BYTEORDER_HAS_U64__ -# define __SWAB_64_THRU_32__ -#endif - -#endif /* __GNUC__ */ - -#include <linux/byteorder/big_endian.h> - -#endif /* _PPC_BYTEORDER_H */ diff --git a/include/asm-ppc/cache.h b/include/asm-ppc/cache.h index 38f2f1be4a8..7a157d0f4b5 100644 --- a/include/asm-ppc/cache.h +++ b/include/asm-ppc/cache.h @@ -9,21 +9,18 @@ /* bytes per L1 cache line */ #if defined(CONFIG_8xx) || defined(CONFIG_403GCX) -#define L1_CACHE_LINE_SIZE 16 -#define LG_L1_CACHE_LINE_SIZE 4 +#define L1_CACHE_SHIFT 4 #define MAX_COPY_PREFETCH 1 #elif defined(CONFIG_PPC64BRIDGE) -#define L1_CACHE_LINE_SIZE 128 -#define LG_L1_CACHE_LINE_SIZE 7 +#define L1_CACHE_SHIFT 7 #define MAX_COPY_PREFETCH 1 #else -#define L1_CACHE_LINE_SIZE 32 -#define LG_L1_CACHE_LINE_SIZE 5 +#define L1_CACHE_SHIFT 5 #define MAX_COPY_PREFETCH 4 #endif -#define L1_CACHE_BYTES L1_CACHE_LINE_SIZE -#define L1_CACHE_SHIFT LG_L1_CACHE_LINE_SIZE +#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) + #define SMP_CACHE_BYTES L1_CACHE_BYTES #define L1_CACHE_SHIFT_MAX 7 /* largest L1 which this arch supports */ diff --git a/include/asm-ppc/checksum.h b/include/asm-ppc/checksum.h deleted file mode 100644 index cf953a92c7a..00000000000 --- a/include/asm-ppc/checksum.h +++ /dev/null @@ -1,107 +0,0 @@ -#ifdef __KERNEL__ -#ifndef _PPC_CHECKSUM_H -#define _PPC_CHECKSUM_H - - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -extern unsigned int csum_partial(const unsigned char * buff, int len, - unsigned int sum); - -/* - * Computes the checksum of a memory block at src, length len, - * and adds in "sum" (32-bit), while copying the block to dst. - * If an access exception occurs on src or dst, it stores -EFAULT - * to *src_err or *dst_err respectively (if that pointer is not - * NULL), and, for an error on src, zeroes the rest of dst. - * - * Like csum_partial, this must be called with even lengths, - * except for the last fragment. - */ -extern unsigned int csum_partial_copy_generic(const char *src, char *dst, - int len, unsigned int sum, - int *src_err, int *dst_err); - -#define csum_partial_copy_from_user(src, dst, len, sum, errp) \ - csum_partial_copy_generic((__force void *)(src), (dst), (len), (sum), (errp), NULL) - -/* FIXME: this needs to be written to really do no check -- Cort */ -#define csum_partial_copy_nocheck(src, dst, len, sum) \ - csum_partial_copy_generic((src), (dst), (len), (sum), NULL, NULL) - -/* - * turns a 32-bit partial checksum (e.g. from csum_partial) into a - * 1's complement 16-bit checksum. - */ -static inline unsigned int csum_fold(unsigned int sum) -{ - unsigned int tmp; - - /* swap the two 16-bit halves of sum */ - __asm__("rlwinm %0,%1,16,0,31" : "=r" (tmp) : "r" (sum)); - /* if there is a carry from adding the two 16-bit halves, - it will carry from the lower half into the upper half, - giving us the correct sum in the upper half. */ - sum = ~(sum + tmp) >> 16; - return sum; -} - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ -static inline unsigned short ip_compute_csum(unsigned char * buff, int len) -{ - return csum_fold(csum_partial(buff, len, 0)); -} - -/* - * FIXME: I swiped this one from the sparc and made minor modifications. - * It may not be correct. -- Cort - */ -static inline unsigned long csum_tcpudp_nofold(unsigned long saddr, - unsigned long daddr, - unsigned short len, - unsigned short proto, - unsigned int sum) -{ - __asm__("\n\ - addc %0,%0,%1 \n\ - adde %0,%0,%2 \n\ - adde %0,%0,%3 \n\ - addze %0,%0 \n\ - " - : "=r" (sum) - : "r" (daddr), "r"(saddr), "r"((proto<<16)+len), "0"(sum)); - return sum; -} - -/* - * This is a version of ip_compute_csum() optimized for IP headers, - * which always checksum on 4 octet boundaries. ihl is the number - * of 32-bit words and is always >= 5. - */ -extern unsigned short ip_fast_csum(unsigned char * iph, unsigned int ihl); - -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ -extern unsigned short csum_tcpudp_magic(unsigned long saddr, - unsigned long daddr, - unsigned short len, - unsigned short proto, - unsigned int sum); - -#endif -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/commproc.h b/include/asm-ppc/commproc.h index 5bbb8e2c1c6..973e6090823 100644 --- a/include/asm-ppc/commproc.h +++ b/include/asm-ppc/commproc.h @@ -83,6 +83,8 @@ extern uint m8xx_cpm_hostalloc(uint size); extern int m8xx_cpm_hostfree(uint start); extern void m8xx_cpm_hostdump(void); +extern void cpm_load_patch(volatile immap_t *immr); + /* Buffer descriptors used by many of the CPM protocols. */ typedef struct cpm_buf_desc { diff --git a/include/asm-ppc/cpm2.h b/include/asm-ppc/cpm2.h index 9483d4bfacf..43d2ebbc774 100644 --- a/include/asm-ppc/cpm2.h +++ b/include/asm-ppc/cpm2.h @@ -1087,6 +1087,9 @@ typedef struct im_idma { #define SCCR_PCIDF_MSK 0x00000078 /* PCI division factor */ #define SCCR_PCIDF_SHIFT 3 +#ifndef CPM_IMMR_OFFSET +#define CPM_IMMR_OFFSET 0x101a8 +#endif #endif /* __CPM2__ */ #endif /* __KERNEL__ */ diff --git a/include/asm-ppc/cputable.h b/include/asm-ppc/cputable.h deleted file mode 100644 index e17c492c870..00000000000 --- a/include/asm-ppc/cputable.h +++ /dev/null @@ -1,129 +0,0 @@ -/* - * include/asm-ppc/cputable.h - * - * Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef __ASM_PPC_CPUTABLE_H -#define __ASM_PPC_CPUTABLE_H - -/* Exposed to userland CPU features */ -#define PPC_FEATURE_32 0x80000000 -#define PPC_FEATURE_64 0x40000000 -#define PPC_FEATURE_601_INSTR 0x20000000 -#define PPC_FEATURE_HAS_ALTIVEC 0x10000000 -#define PPC_FEATURE_HAS_FPU 0x08000000 -#define PPC_FEATURE_HAS_MMU 0x04000000 -#define PPC_FEATURE_HAS_4xxMAC 0x02000000 -#define PPC_FEATURE_UNIFIED_CACHE 0x01000000 -#define PPC_FEATURE_HAS_SPE 0x00800000 -#define PPC_FEATURE_HAS_EFP_SINGLE 0x00400000 -#define PPC_FEATURE_HAS_EFP_DOUBLE 0x00200000 -#define PPC_FEATURE_NO_TB 0x00100000 - -#ifdef __KERNEL__ - -#ifndef __ASSEMBLY__ - -/* This structure can grow, it's real size is used by head.S code - * via the mkdefs mecanism. - */ -struct cpu_spec; - -typedef void (*cpu_setup_t)(unsigned long offset, int cpu_nr, struct cpu_spec* spec); - -struct cpu_spec { - /* CPU is matched via (PVR & pvr_mask) == pvr_value */ - unsigned int pvr_mask; - unsigned int pvr_value; - - char *cpu_name; - unsigned int cpu_features; /* Kernel features */ - unsigned int cpu_user_features; /* Userland features */ - - /* cache line sizes */ - unsigned int icache_bsize; - unsigned int dcache_bsize; - - /* number of performance monitor counters */ - unsigned int num_pmcs; - - /* this is called to initialize various CPU bits like L1 cache, - * BHT, SPD, etc... from head.S before branching to identify_machine - */ - cpu_setup_t cpu_setup; -}; - -extern struct cpu_spec cpu_specs[]; -extern struct cpu_spec *cur_cpu_spec[]; - -static inline unsigned int cpu_has_feature(unsigned int feature) -{ - return cur_cpu_spec[0]->cpu_features & feature; -} - -#endif /* __ASSEMBLY__ */ - -/* CPU kernel features */ -#define CPU_FTR_SPLIT_ID_CACHE 0x00000001 -#define CPU_FTR_L2CR 0x00000002 -#define CPU_FTR_SPEC7450 0x00000004 -#define CPU_FTR_ALTIVEC 0x00000008 -#define CPU_FTR_TAU 0x00000010 -#define CPU_FTR_CAN_DOZE 0x00000020 -#define CPU_FTR_USE_TB 0x00000040 -#define CPU_FTR_604_PERF_MON 0x00000080 -#define CPU_FTR_601 0x00000100 -#define CPU_FTR_HPTE_TABLE 0x00000200 -#define CPU_FTR_CAN_NAP 0x00000400 -#define CPU_FTR_L3CR 0x00000800 -#define CPU_FTR_L3_DISABLE_NAP 0x00001000 -#define CPU_FTR_NAP_DISABLE_L2_PR 0x00002000 -#define CPU_FTR_DUAL_PLL_750FX 0x00004000 -#define CPU_FTR_NO_DPM 0x00008000 -#define CPU_FTR_HAS_HIGH_BATS 0x00010000 -#define CPU_FTR_NEED_COHERENT 0x00020000 -#define CPU_FTR_NO_BTIC 0x00040000 -#define CPU_FTR_BIG_PHYS 0x00080000 - -#ifdef __ASSEMBLY__ - -#define BEGIN_FTR_SECTION 98: - -#define END_FTR_SECTION(msk, val) \ -99: \ - .section __ftr_fixup,"a"; \ - .align 2; \ - .long msk; \ - .long val; \ - .long 98b; \ - .long 99b; \ - .previous - -#else - -#define BEGIN_FTR_SECTION "98:\n" -#define END_FTR_SECTION(msk, val) \ -"99:\n" \ -" .section __ftr_fixup,\"a\";\n" \ -" .align 2;\n" \ -" .long "#msk";\n" \ -" .long "#val";\n" \ -" .long 98b;\n" \ -" .long 99b;\n" \ -" .previous\n" - - -#endif /* __ASSEMBLY__ */ - -#define END_FTR_SECTION_IFSET(msk) END_FTR_SECTION((msk), (msk)) -#define END_FTR_SECTION_IFCLR(msk) END_FTR_SECTION((msk), 0) - -#endif /* __ASM_PPC_CPUTABLE_H */ -#endif /* __KERNEL__ */ - diff --git a/include/asm-ppc/dbdma.h b/include/asm-ppc/dbdma.h deleted file mode 100644 index 8973565f95d..00000000000 --- a/include/asm-ppc/dbdma.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - * Definitions for using the Apple Descriptor-Based DMA controller - * in Power Macintosh computers. - * - * Copyright (C) 1996 Paul Mackerras. - */ - -#ifdef __KERNEL__ -#ifndef _ASM_DBDMA_H_ -#define _ASM_DBDMA_H_ -/* - * DBDMA control/status registers. All little-endian. - */ -struct dbdma_regs { - unsigned int control; /* lets you change bits in status */ - unsigned int status; /* DMA and device status bits (see below) */ - unsigned int cmdptr_hi; /* upper 32 bits of command address */ - unsigned int cmdptr; /* (lower 32 bits of) command address (phys) */ - unsigned int intr_sel; /* select interrupt condition bit */ - unsigned int br_sel; /* select branch condition bit */ - unsigned int wait_sel; /* select wait condition bit */ - unsigned int xfer_mode; - unsigned int data2ptr_hi; - unsigned int data2ptr; - unsigned int res1; - unsigned int address_hi; - unsigned int br_addr_hi; - unsigned int res2[3]; -}; - -/* Bits in control and status registers */ -#define RUN 0x8000 -#define PAUSE 0x4000 -#define FLUSH 0x2000 -#define WAKE 0x1000 -#define DEAD 0x0800 -#define ACTIVE 0x0400 -#define BT 0x0100 -#define DEVSTAT 0x00ff - -/* - * DBDMA command structure. These fields are all little-endian! - */ -struct dbdma_cmd { - unsigned short req_count; /* requested byte transfer count */ - unsigned short command; /* command word (has bit-fields) */ - unsigned int phy_addr; /* physical data address */ - unsigned int cmd_dep; /* command-dependent field */ - unsigned short res_count; /* residual count after completion */ - unsigned short xfer_status; /* transfer status */ -}; - -/* DBDMA command values in command field */ -#define OUTPUT_MORE 0 /* transfer memory data to stream */ -#define OUTPUT_LAST 0x1000 /* ditto followed by end marker */ -#define INPUT_MORE 0x2000 /* transfer stream data to memory */ -#define INPUT_LAST 0x3000 /* ditto, expect end marker */ -#define STORE_WORD 0x4000 /* write word (4 bytes) to device reg */ -#define LOAD_WORD 0x5000 /* read word (4 bytes) from device reg */ -#define DBDMA_NOP 0x6000 /* do nothing */ -#define DBDMA_STOP 0x7000 /* suspend processing */ - -/* Key values in command field */ -#define KEY_STREAM0 0 /* usual data stream */ -#define KEY_STREAM1 0x100 /* control/status stream */ -#define KEY_STREAM2 0x200 /* device-dependent stream */ -#define KEY_STREAM3 0x300 /* device-dependent stream */ -#define KEY_REGS 0x500 /* device register space */ -#define KEY_SYSTEM 0x600 /* system memory-mapped space */ -#define KEY_DEVICE 0x700 /* device memory-mapped space */ - -/* Interrupt control values in command field */ -#define INTR_NEVER 0 /* don't interrupt */ -#define INTR_IFSET 0x10 /* intr if condition bit is 1 */ -#define INTR_IFCLR 0x20 /* intr if condition bit is 0 */ -#define INTR_ALWAYS 0x30 /* always interrupt */ - -/* Branch control values in command field */ -#define BR_NEVER 0 /* don't branch */ -#define BR_IFSET 0x4 /* branch if condition bit is 1 */ -#define BR_IFCLR 0x8 /* branch if condition bit is 0 */ -#define BR_ALWAYS 0xc /* always branch */ - -/* Wait control values in command field */ -#define WAIT_NEVER 0 /* don't wait */ -#define WAIT_IFSET 1 /* wait if condition bit is 1 */ -#define WAIT_IFCLR 2 /* wait if condition bit is 0 */ -#define WAIT_ALWAYS 3 /* always wait */ - -/* Align an address for a DBDMA command structure */ -#define DBDMA_ALIGN(x) (((unsigned long)(x) + sizeof(struct dbdma_cmd) - 1) \ - & -sizeof(struct dbdma_cmd)) - -/* Useful macros */ -#define DBDMA_DO_STOP(regs) do { \ - out_le32(&((regs)->control), (RUN|FLUSH)<<16); \ - while(in_le32(&((regs)->status)) & (ACTIVE|FLUSH)) \ - ; \ -} while(0) - -#endif /* _ASM_DBDMA_H_ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/dma.h b/include/asm-ppc/dma.h deleted file mode 100644 index cc8e5cd8c9d..00000000000 --- a/include/asm-ppc/dma.h +++ /dev/null @@ -1,371 +0,0 @@ -/* - * include/asm-ppc/dma.h: Defines for using and allocating dma channels. - * Written by Hennus Bergman, 1992. - * High DMA channel support & info by Hannu Savolainen - * and John Boyd, Nov. 1992. - * Changes for ppc sound by Christoph Nadig - */ - -#ifdef __KERNEL__ - -#include <linux/config.h> -#include <asm/io.h> -#include <linux/spinlock.h> -#include <asm/system.h> - -/* - * Note: Adapted for PowerPC by Gary Thomas - * Modified by Cort Dougan <cort@cs.nmt.edu> - * - * None of this really applies for Power Macintoshes. There is - * basically just enough here to get kernel/dma.c to compile. - * - * There may be some comments or restrictions made here which are - * not valid for the PReP platform. Take what you read - * with a grain of salt. - */ - -#ifndef _ASM_DMA_H -#define _ASM_DMA_H - -#ifndef MAX_DMA_CHANNELS -#define MAX_DMA_CHANNELS 8 -#endif - -/* The maximum address that we can perform a DMA transfer to on this platform */ -/* Doesn't really apply... */ -#define MAX_DMA_ADDRESS 0xFFFFFFFF - -/* in arch/ppc/kernel/setup.c -- Cort */ -extern unsigned long DMA_MODE_WRITE, DMA_MODE_READ; -extern unsigned long ISA_DMA_THRESHOLD; - -#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER -#define dma_outb outb_p -#else -#define dma_outb outb -#endif - -#define dma_inb inb - -/* - * NOTES about DMA transfers: - * - * controller 1: channels 0-3, byte operations, ports 00-1F - * controller 2: channels 4-7, word operations, ports C0-DF - * - * - ALL registers are 8 bits only, regardless of transfer size - * - channel 4 is not used - cascades 1 into 2. - * - channels 0-3 are byte - addresses/counts are for physical bytes - * - channels 5-7 are word - addresses/counts are for physical words - * - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries - * - transfer count loaded to registers is 1 less than actual count - * - controller 2 offsets are all even (2x offsets for controller 1) - * - page registers for 5-7 don't use data bit 0, represent 128K pages - * - page registers for 0-3 use bit 0, represent 64K pages - * - * On PReP, DMA transfers are limited to the lower 16MB of _physical_ memory. - * On CHRP, the W83C553F (and VLSI Tollgate?) support full 32 bit addressing. - * Note that addresses loaded into registers must be _physical_ addresses, - * not logical addresses (which may differ if paging is active). - * - * Address mapping for channels 0-3: - * - * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses) - * | ... | | ... | | ... | - * | ... | | ... | | ... | - * | ... | | ... | | ... | - * P7 ... P0 A7 ... A0 A7 ... A0 - * | Page | Addr MSB | Addr LSB | (DMA registers) - * - * Address mapping for channels 5-7: - * - * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses) - * | ... | \ \ ... \ \ \ ... \ \ - * | ... | \ \ ... \ \ \ ... \ (not used) - * | ... | \ \ ... \ \ \ ... \ - * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0 - * | Page | Addr MSB | Addr LSB | (DMA registers) - * - * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses - * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at - * the hardware level, so odd-byte transfers aren't possible). - * - * Transfer count (_not # bytes_) is limited to 64K, represented as actual - * count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more, - * and up to 128K bytes may be transferred on channels 5-7 in one operation. - * - */ - -/* see prep_setup_arch() for detailed informations */ -#if defined(CONFIG_SOUND_CS4232) && defined(CONFIG_PPC_PREP) -extern long ppc_cs4232_dma, ppc_cs4232_dma2; -#define SND_DMA1 ppc_cs4232_dma -#define SND_DMA2 ppc_cs4232_dma2 -#else -#define SND_DMA1 -1 -#define SND_DMA2 -1 -#endif - -/* 8237 DMA controllers */ -#define IO_DMA1_BASE 0x00 /* 8 bit slave DMA, channels 0..3 */ -#define IO_DMA2_BASE 0xC0 /* 16 bit master DMA, ch 4(=slave input)..7 */ - -/* DMA controller registers */ -#define DMA1_CMD_REG 0x08 /* command register (w) */ -#define DMA1_STAT_REG 0x08 /* status register (r) */ -#define DMA1_REQ_REG 0x09 /* request register (w) */ -#define DMA1_MASK_REG 0x0A /* single-channel mask (w) */ -#define DMA1_MODE_REG 0x0B /* mode register (w) */ -#define DMA1_CLEAR_FF_REG 0x0C /* clear pointer flip-flop (w) */ -#define DMA1_TEMP_REG 0x0D /* Temporary Register (r) */ -#define DMA1_RESET_REG 0x0D /* Master Clear (w) */ -#define DMA1_CLR_MASK_REG 0x0E /* Clear Mask */ -#define DMA1_MASK_ALL_REG 0x0F /* all-channels mask (w) */ - -#define DMA2_CMD_REG 0xD0 /* command register (w) */ -#define DMA2_STAT_REG 0xD0 /* status register (r) */ -#define DMA2_REQ_REG 0xD2 /* request register (w) */ -#define DMA2_MASK_REG 0xD4 /* single-channel mask (w) */ -#define DMA2_MODE_REG 0xD6 /* mode register (w) */ -#define DMA2_CLEAR_FF_REG 0xD8 /* clear pointer flip-flop (w) */ -#define DMA2_TEMP_REG 0xDA /* Temporary Register (r) */ -#define DMA2_RESET_REG 0xDA /* Master Clear (w) */ -#define DMA2_CLR_MASK_REG 0xDC /* Clear Mask */ -#define DMA2_MASK_ALL_REG 0xDE /* all-channels mask (w) */ - -#define DMA_ADDR_0 0x00 /* DMA address registers */ -#define DMA_ADDR_1 0x02 -#define DMA_ADDR_2 0x04 -#define DMA_ADDR_3 0x06 -#define DMA_ADDR_4 0xC0 -#define DMA_ADDR_5 0xC4 -#define DMA_ADDR_6 0xC8 -#define DMA_ADDR_7 0xCC - -#define DMA_CNT_0 0x01 /* DMA count registers */ -#define DMA_CNT_1 0x03 -#define DMA_CNT_2 0x05 -#define DMA_CNT_3 0x07 -#define DMA_CNT_4 0xC2 -#define DMA_CNT_5 0xC6 -#define DMA_CNT_6 0xCA -#define DMA_CNT_7 0xCE - -#define DMA_LO_PAGE_0 0x87 /* DMA page registers */ -#define DMA_LO_PAGE_1 0x83 -#define DMA_LO_PAGE_2 0x81 -#define DMA_LO_PAGE_3 0x82 -#define DMA_LO_PAGE_5 0x8B -#define DMA_LO_PAGE_6 0x89 -#define DMA_LO_PAGE_7 0x8A - -#define DMA_HI_PAGE_0 0x487 /* DMA page registers */ -#define DMA_HI_PAGE_1 0x483 -#define DMA_HI_PAGE_2 0x481 -#define DMA_HI_PAGE_3 0x482 -#define DMA_HI_PAGE_5 0x48B -#define DMA_HI_PAGE_6 0x489 -#define DMA_HI_PAGE_7 0x48A - -#define DMA1_EXT_REG 0x40B -#define DMA2_EXT_REG 0x4D6 - -#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */ -#define DMA_AUTOINIT 0x10 - -extern spinlock_t dma_spin_lock; - -static __inline__ unsigned long claim_dma_lock(void) -{ - unsigned long flags; - spin_lock_irqsave(&dma_spin_lock, flags); - return flags; -} - -static __inline__ void release_dma_lock(unsigned long flags) -{ - spin_unlock_irqrestore(&dma_spin_lock, flags); -} - -/* enable/disable a specific DMA channel */ -static __inline__ void enable_dma(unsigned int dmanr) -{ - unsigned char ucDmaCmd = 0x00; - - if (dmanr != 4) { - dma_outb(0, DMA2_MASK_REG); /* This may not be enabled */ - dma_outb(ucDmaCmd, DMA2_CMD_REG); /* Enable group */ - } - if (dmanr <= 3) { - dma_outb(dmanr, DMA1_MASK_REG); - dma_outb(ucDmaCmd, DMA1_CMD_REG); /* Enable group */ - } else - dma_outb(dmanr & 3, DMA2_MASK_REG); -} - -static __inline__ void disable_dma(unsigned int dmanr) -{ - if (dmanr <= 3) - dma_outb(dmanr | 4, DMA1_MASK_REG); - else - dma_outb((dmanr & 3) | 4, DMA2_MASK_REG); -} - -/* Clear the 'DMA Pointer Flip Flop'. - * Write 0 for LSB/MSB, 1 for MSB/LSB access. - * Use this once to initialize the FF to a known state. - * After that, keep track of it. :-) - * --- In order to do that, the DMA routines below should --- - * --- only be used while interrupts are disabled! --- - */ -static __inline__ void clear_dma_ff(unsigned int dmanr) -{ - if (dmanr <= 3) - dma_outb(0, DMA1_CLEAR_FF_REG); - else - dma_outb(0, DMA2_CLEAR_FF_REG); -} - -/* set mode (above) for a specific DMA channel */ -static __inline__ void set_dma_mode(unsigned int dmanr, char mode) -{ - if (dmanr <= 3) - dma_outb(mode | dmanr, DMA1_MODE_REG); - else - dma_outb(mode | (dmanr & 3), DMA2_MODE_REG); -} - -/* Set only the page register bits of the transfer address. - * This is used for successive transfers when we know the contents of - * the lower 16 bits of the DMA current address register, but a 64k boundary - * may have been crossed. - */ -static __inline__ void set_dma_page(unsigned int dmanr, int pagenr) -{ - switch (dmanr) { - case 0: - dma_outb(pagenr, DMA_LO_PAGE_0); - dma_outb(pagenr >> 8, DMA_HI_PAGE_0); - break; - case 1: - dma_outb(pagenr, DMA_LO_PAGE_1); - dma_outb(pagenr >> 8, DMA_HI_PAGE_1); - break; - case 2: - dma_outb(pagenr, DMA_LO_PAGE_2); - dma_outb(pagenr >> 8, DMA_HI_PAGE_2); - break; - case 3: - dma_outb(pagenr, DMA_LO_PAGE_3); - dma_outb(pagenr >> 8, DMA_HI_PAGE_3); - break; - case 5: - if (SND_DMA1 == 5 || SND_DMA2 == 5) - dma_outb(pagenr, DMA_LO_PAGE_5); - else - dma_outb(pagenr & 0xfe, DMA_LO_PAGE_5); - dma_outb(pagenr >> 8, DMA_HI_PAGE_5); - break; - case 6: - if (SND_DMA1 == 6 || SND_DMA2 == 6) - dma_outb(pagenr, DMA_LO_PAGE_6); - else - dma_outb(pagenr & 0xfe, DMA_LO_PAGE_6); - dma_outb(pagenr >> 8, DMA_HI_PAGE_6); - break; - case 7: - if (SND_DMA1 == 7 || SND_DMA2 == 7) - dma_outb(pagenr, DMA_LO_PAGE_7); - else - dma_outb(pagenr & 0xfe, DMA_LO_PAGE_7); - dma_outb(pagenr >> 8, DMA_HI_PAGE_7); - break; - } -} - -/* Set transfer address & page bits for specific DMA channel. - * Assumes dma flipflop is clear. - */ -static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int phys) -{ - if (dmanr <= 3) { - dma_outb(phys & 0xff, ((dmanr & 3) << 1) + IO_DMA1_BASE); - dma_outb((phys >> 8) & 0xff, ((dmanr & 3) << 1) + IO_DMA1_BASE); - } else if (dmanr == SND_DMA1 || dmanr == SND_DMA2) { - dma_outb(phys & 0xff, ((dmanr & 3) << 2) + IO_DMA2_BASE); - dma_outb((phys >> 8) & 0xff, ((dmanr & 3) << 2) + IO_DMA2_BASE); - dma_outb((dmanr & 3), DMA2_EXT_REG); - } else { - dma_outb((phys >> 1) & 0xff, ((dmanr & 3) << 2) + IO_DMA2_BASE); - dma_outb((phys >> 9) & 0xff, ((dmanr & 3) << 2) + IO_DMA2_BASE); - } - set_dma_page(dmanr, phys >> 16); -} - -/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for - * a specific DMA channel. - * You must ensure the parameters are valid. - * NOTE: from a manual: "the number of transfers is one more - * than the initial word count"! This is taken into account. - * Assumes dma flip-flop is clear. - * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7. - */ -static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) -{ - count--; - if (dmanr <= 3) { - dma_outb(count & 0xff, ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE); - dma_outb((count >> 8) & 0xff, ((dmanr & 3) << 1) + 1 + - IO_DMA1_BASE); - } else if (dmanr == SND_DMA1 || dmanr == SND_DMA2) { - dma_outb(count & 0xff, ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE); - dma_outb((count >> 8) & 0xff, ((dmanr & 3) << 2) + 2 + - IO_DMA2_BASE); - } else { - dma_outb((count >> 1) & 0xff, ((dmanr & 3) << 2) + 2 + - IO_DMA2_BASE); - dma_outb((count >> 9) & 0xff, ((dmanr & 3) << 2) + 2 + - IO_DMA2_BASE); - } -} - -/* Get DMA residue count. After a DMA transfer, this - * should return zero. Reading this while a DMA transfer is - * still in progress will return unpredictable results. - * If called before the channel has been used, it may return 1. - * Otherwise, it returns the number of _bytes_ left to transfer. - * - * Assumes DMA flip-flop is clear. - */ -static __inline__ int get_dma_residue(unsigned int dmanr) -{ - unsigned int io_port = (dmanr <= 3) ? - ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE - : ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE; - - /* using short to get 16-bit wrap around */ - unsigned short count; - - count = 1 + dma_inb(io_port); - count += dma_inb(io_port) << 8; - - return (dmanr <= 3 || dmanr == SND_DMA1 || dmanr == SND_DMA2) - ? count : (count << 1); - -} - -/* These are in kernel/dma.c: */ - -/* reserve a DMA channel */ -extern int request_dma(unsigned int dmanr, const char *device_id); -/* release it again */ -extern void free_dma(unsigned int dmanr); - -#ifdef CONFIG_PCI -extern int isa_dma_bridge_buggy; -#else -#define isa_dma_bridge_buggy (0) -#endif -#endif /* _ASM_DMA_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/elf.h b/include/asm-ppc/elf.h deleted file mode 100644 index c25cc35e6ab..00000000000 --- a/include/asm-ppc/elf.h +++ /dev/null @@ -1,151 +0,0 @@ -#ifndef __PPC_ELF_H -#define __PPC_ELF_H - -/* - * ELF register definitions.. - */ -#include <asm/types.h> -#include <asm/ptrace.h> -#include <asm/cputable.h> -#include <asm/auxvec.h> - -/* PowerPC relocations defined by the ABIs */ -#define R_PPC_NONE 0 -#define R_PPC_ADDR32 1 /* 32bit absolute address */ -#define R_PPC_ADDR24 2 /* 26bit address, 2 bits ignored. */ -#define R_PPC_ADDR16 3 /* 16bit absolute address */ -#define R_PPC_ADDR16_LO 4 /* lower 16bit of absolute address */ -#define R_PPC_ADDR16_HI 5 /* high 16bit of absolute address */ -#define R_PPC_ADDR16_HA 6 /* adjusted high 16bit */ -#define R_PPC_ADDR14 7 /* 16bit address, 2 bits ignored */ -#define R_PPC_ADDR14_BRTAKEN 8 -#define R_PPC_ADDR14_BRNTAKEN 9 -#define R_PPC_REL24 10 /* PC relative 26 bit */ -#define R_PPC_REL14 11 /* PC relative 16 bit */ -#define R_PPC_REL14_BRTAKEN 12 -#define R_PPC_REL14_BRNTAKEN 13 -#define R_PPC_GOT16 14 -#define R_PPC_GOT16_LO 15 -#define R_PPC_GOT16_HI 16 -#define R_PPC_GOT16_HA 17 -#define R_PPC_PLTREL24 18 -#define R_PPC_COPY 19 -#define R_PPC_GLOB_DAT 20 -#define R_PPC_JMP_SLOT 21 -#define R_PPC_RELATIVE 22 -#define R_PPC_LOCAL24PC 23 -#define R_PPC_UADDR32 24 -#define R_PPC_UADDR16 25 -#define R_PPC_REL32 26 -#define R_PPC_PLT32 27 -#define R_PPC_PLTREL32 28 -#define R_PPC_PLT16_LO 29 -#define R_PPC_PLT16_HI 30 -#define R_PPC_PLT16_HA 31 -#define R_PPC_SDAREL16 32 -#define R_PPC_SECTOFF 33 -#define R_PPC_SECTOFF_LO 34 -#define R_PPC_SECTOFF_HI 35 -#define R_PPC_SECTOFF_HA 36 -/* Keep this the last entry. */ -#define R_PPC_NUM 37 - -#define ELF_NGREG 48 /* includes nip, msr, lr, etc. */ -#define ELF_NFPREG 33 /* includes fpscr */ -#define ELF_NVRREG 33 /* includes vscr */ -#define ELF_NEVRREG 34 /* includes acc (as 2) */ - -/* - * These are used to set parameters in the core dumps. - */ -#define ELF_ARCH EM_PPC -#define ELF_CLASS ELFCLASS32 -#define ELF_DATA ELFDATA2MSB - -/* General registers */ -typedef unsigned long elf_greg_t; -typedef elf_greg_t elf_gregset_t[ELF_NGREG]; - -/* Floating point registers */ -typedef double elf_fpreg_t; -typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; - -/* Altivec registers */ -typedef __vector128 elf_vrreg_t; -typedef elf_vrreg_t elf_vrregset_t[ELF_NVRREG]; - -#ifdef __KERNEL__ - -struct task_struct; - -/* - * This is used to ensure we don't load something for the wrong architecture. - */ - -#define elf_check_arch(x) ((x)->e_machine == EM_PPC) - -/* This is the location that an ET_DYN program is loaded if exec'ed. Typical - use of this is to invoke "./ld.so someprog" to test out a new version of - the loader. We need to make sure that it is out of the way of the program - that it will "exec", and that there is sufficient room for the brk. */ - -#define ELF_ET_DYN_BASE (0x08000000) - -#define USE_ELF_CORE_DUMP -#define ELF_EXEC_PAGESIZE 4096 - -#define ELF_CORE_COPY_REGS(gregs, regs) \ - memcpy((gregs), (regs), sizeof(struct pt_regs)); \ - memset((char *)(gregs) + sizeof(struct pt_regs), 0, \ - sizeof(elf_gregset_t) - sizeof(struct pt_regs)); - -#define ELF_CORE_COPY_TASK_REGS(t, elfregs) \ - ((t)->thread.regs? \ - ({ ELF_CORE_COPY_REGS((elfregs), (t)->thread.regs); 1; }): 0) - -extern int dump_task_fpu(struct task_struct *t, elf_fpregset_t *fpu); -#define ELF_CORE_COPY_FPREGS(t, fpu) dump_task_fpu((t), (fpu)) - -/* This yields a mask that user programs can use to figure out what - instruction set this cpu supports. This could be done in userspace, - but it's not easy, and we've already done it here. */ - -#define ELF_HWCAP (cur_cpu_spec[0]->cpu_user_features) - -/* This yields a string that ld.so will use to load implementation - specific libraries for optimization. This is more specific in - intent than poking at uname or /proc/cpuinfo. - - For the moment, we have only optimizations for the Intel generations, - but that could change... */ - -#define ELF_PLATFORM (NULL) - -#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX) - -extern int dcache_bsize; -extern int icache_bsize; -extern int ucache_bsize; - -/* - * The requirements here are: - * - keep the final alignment of sp (sp & 0xf) - * - make sure the 32-bit value at the first 16 byte aligned position of - * AUXV is greater than 16 for glibc compatibility. - * AT_IGNOREPPC is used for that. - * - for compatibility with glibc ARCH_DLINFO must always be defined on PPC, - * even if DLINFO_ARCH_ITEMS goes to zero or is undefined. - */ -#define ARCH_DLINFO \ -do { \ - /* Handle glibc compatibility. */ \ - NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC); \ - NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC); \ - /* Cache size items */ \ - NEW_AUX_ENT(AT_DCACHEBSIZE, dcache_bsize); \ - NEW_AUX_ENT(AT_ICACHEBSIZE, icache_bsize); \ - NEW_AUX_ENT(AT_UCACHEBSIZE, ucache_bsize); \ - } while (0) - -#endif /* __KERNEL__ */ -#endif diff --git a/include/asm-ppc/futex.h b/include/asm-ppc/futex.h deleted file mode 100644 index 9feff4ce142..00000000000 --- a/include/asm-ppc/futex.h +++ /dev/null @@ -1,53 +0,0 @@ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H - -#ifdef __KERNEL__ - -#include <linux/futex.h> -#include <asm/errno.h> -#include <asm/uaccess.h> - -static inline int -futex_atomic_op_inuser (int encoded_op, int __user *uaddr) -{ - int op = (encoded_op >> 28) & 7; - int cmp = (encoded_op >> 24) & 15; - int oparg = (encoded_op << 8) >> 20; - int cmparg = (encoded_op << 20) >> 20; - int oldval = 0, ret; - if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) - oparg = 1 << oparg; - - if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int))) - return -EFAULT; - - inc_preempt_count(); - - switch (op) { - case FUTEX_OP_SET: - case FUTEX_OP_ADD: - case FUTEX_OP_OR: - case FUTEX_OP_ANDN: - case FUTEX_OP_XOR: - default: - ret = -ENOSYS; - } - - dec_preempt_count(); - - if (!ret) { - switch (cmp) { - case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break; - case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break; - case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break; - case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break; - case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break; - case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break; - default: ret = -ENOSYS; - } - } - return ret; -} - -#endif -#endif diff --git a/include/asm-ppc/hardirq.h b/include/asm-ppc/hardirq.h deleted file mode 100644 index 94f1411b1a9..00000000000 --- a/include/asm-ppc/hardirq.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifdef __KERNEL__ -#ifndef __ASM_HARDIRQ_H -#define __ASM_HARDIRQ_H - -#include <linux/config.h> -#include <linux/cache.h> -#include <linux/smp_lock.h> -#include <asm/irq.h> - -/* The __last_jiffy_stamp field is needed to ensure that no decrementer - * interrupt is lost on SMP machines. Since on most CPUs it is in the same - * cache line as local_irq_count, it is cheap to access and is also used on UP - * for uniformity. - */ -typedef struct { - unsigned long __softirq_pending; /* set_bit is used on this */ - unsigned int __last_jiffy_stamp; -} ____cacheline_aligned irq_cpustat_t; - -#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ - -#define last_jiffy_stamp(cpu) __IRQ_STAT((cpu), __last_jiffy_stamp) - -static inline void ack_bad_irq(int irq) -{ - printk(KERN_CRIT "illegal vector %d received!\n", irq); - BUG(); -} - -#endif /* __ASM_HARDIRQ_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/heathrow.h b/include/asm-ppc/heathrow.h deleted file mode 100644 index 22ac179856b..00000000000 --- a/include/asm-ppc/heathrow.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * heathrow.h: definitions for using the "Heathrow" I/O controller chip. - * - * Grabbed from Open Firmware definitions on a PowerBook G3 Series - * - * Copyright (C) 1997 Paul Mackerras. - */ - -/* Front light color on Yikes/B&W G3. 32 bits */ -#define HEATHROW_FRONT_LIGHT 0x32 /* (set to 0 or 0xffffffff) */ - -/* Brightness/contrast (gossamer iMac ?). 8 bits */ -#define HEATHROW_BRIGHTNESS_CNTL 0x32 -#define HEATHROW_CONTRAST_CNTL 0x33 - -/* offset from ohare base for feature control register */ -#define HEATHROW_MBCR 0x34 /* Media bay control */ -#define HEATHROW_FCR 0x38 /* Feature control */ -#define HEATHROW_AUX_CNTL_REG 0x3c /* Aux control */ - -/* - * Bits in feature control register. - * Bits postfixed with a _N are in inverse logic - */ -#define HRW_SCC_TRANS_EN_N 0x00000001 /* Also controls modem power */ -#define HRW_BAY_POWER_N 0x00000002 -#define HRW_BAY_PCI_ENABLE 0x00000004 -#define HRW_BAY_IDE_ENABLE 0x00000008 -#define HRW_BAY_FLOPPY_ENABLE 0x00000010 -#define HRW_IDE0_ENABLE 0x00000020 -#define HRW_IDE0_RESET_N 0x00000040 -#define HRW_BAY_DEV_MASK 0x0000001c -#define HRW_BAY_RESET_N 0x00000080 -#define HRW_IOBUS_ENABLE 0x00000100 /* Internal IDE ? */ -#define HRW_SCC_ENABLE 0x00000200 -#define HRW_MESH_ENABLE 0x00000400 -#define HRW_SWIM_ENABLE 0x00000800 -#define HRW_SOUND_POWER_N 0x00001000 -#define HRW_SOUND_CLK_ENABLE 0x00002000 -#define HRW_SCCA_IO 0x00004000 -#define HRW_SCCB_IO 0x00008000 -#define HRW_PORT_OR_DESK_VIA_N 0x00010000 /* This one is 0 on PowerBook */ -#define HRW_PWM_MON_ID_N 0x00020000 /* ??? (0) */ -#define HRW_HOOK_MB_CNT_N 0x00040000 /* ??? (0) */ -#define HRW_SWIM_CLONE_FLOPPY 0x00080000 /* ??? (0) */ -#define HRW_AUD_RUN22 0x00100000 /* ??? (1) */ -#define HRW_SCSI_LINK_MODE 0x00200000 /* Read ??? (1) */ -#define HRW_ARB_BYPASS 0x00400000 /* Disable internal PCI arbitrer */ -#define HRW_IDE1_RESET_N 0x00800000 /* Media bay */ -#define HRW_SLOW_SCC_PCLK 0x01000000 /* ??? (0) */ -#define HRW_RESET_SCC 0x02000000 -#define HRW_MFDC_CELL_ENABLE 0x04000000 /* ??? (0) */ -#define HRW_USE_MFDC 0x08000000 /* ??? (0) */ -#define HRW_BMAC_IO_ENABLE 0x60000000 /* two bits, not documented in OF */ -#define HRW_BMAC_RESET 0x80000000 /* not documented in OF */ - -/* We OR those features at boot on desktop G3s */ -#define HRW_DEFAULTS (HRW_SCCA_IO | HRW_SCCB_IO | HRW_SCC_ENABLE) - -/* Looks like Heathrow has some sort of GPIOs as well... */ -#define HRW_GPIO_MODEM_RESET 0x6d - diff --git a/include/asm-ppc/hw_irq.h b/include/asm-ppc/hw_irq.h deleted file mode 100644 index 47dc7990fb2..00000000000 --- a/include/asm-ppc/hw_irq.h +++ /dev/null @@ -1,74 +0,0 @@ -/* - * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu> - */ -#ifdef __KERNEL__ -#ifndef _PPC_HW_IRQ_H -#define _PPC_HW_IRQ_H - -#include <asm/ptrace.h> -#include <asm/reg.h> - -extern void timer_interrupt(struct pt_regs *); - -#define INLINE_IRQS - -#define irqs_disabled() ((mfmsr() & MSR_EE) == 0) - -#ifdef INLINE_IRQS - -static inline void local_irq_disable(void) -{ - unsigned long msr; - msr = mfmsr(); - mtmsr(msr & ~MSR_EE); - __asm__ __volatile__("": : :"memory"); -} - -static inline void local_irq_enable(void) -{ - unsigned long msr; - __asm__ __volatile__("": : :"memory"); - msr = mfmsr(); - mtmsr(msr | MSR_EE); -} - -static inline void local_irq_save_ptr(unsigned long *flags) -{ - unsigned long msr; - msr = mfmsr(); - *flags = msr; - mtmsr(msr & ~MSR_EE); - __asm__ __volatile__("": : :"memory"); -} - -#define local_save_flags(flags) ((flags) = mfmsr()) -#define local_irq_save(flags) local_irq_save_ptr(&flags) -#define local_irq_restore(flags) mtmsr(flags) - -#else - -extern void local_irq_enable(void); -extern void local_irq_disable(void); -extern void local_irq_restore(unsigned long); -extern void local_save_flags_ptr(unsigned long *); - -#define local_save_flags(flags) local_save_flags_ptr(&flags) -#define local_irq_save(flags) ({local_save_flags(flags);local_irq_disable();}) - -#endif - -extern void do_lost_interrupts(unsigned long); - -#define mask_irq(irq) ({if (irq_desc[irq].handler && irq_desc[irq].handler->disable) irq_desc[irq].handler->disable(irq);}) -#define unmask_irq(irq) ({if (irq_desc[irq].handler && irq_desc[irq].handler->enable) irq_desc[irq].handler->enable(irq);}) -#define ack_irq(irq) ({if (irq_desc[irq].handler && irq_desc[irq].handler->ack) irq_desc[irq].handler->ack(irq);}) - -/* Should we handle this via lost interrupts and IPIs or should we don't care like - * we do now ? --BenH. - */ -struct hw_interrupt_type; -static inline void hw_resend_irq(struct hw_interrupt_type *h, unsigned int i) {} - - -#endif /* _PPC_HW_IRQ_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/i8259.h b/include/asm-ppc/i8259.h deleted file mode 100644 index 091b71295de..00000000000 --- a/include/asm-ppc/i8259.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef _PPC_KERNEL_i8259_H -#define _PPC_KERNEL_i8259_H - -#include <linux/irq.h> - -extern struct hw_interrupt_type i8259_pic; - -extern void i8259_init(long intack_addr); -extern int i8259_irq(struct pt_regs *regs); - -#endif /* _PPC_KERNEL_i8259_H */ diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h index 94d83998a75..f7f614dfc64 100644 --- a/include/asm-ppc/io.h +++ b/include/asm-ppc/io.h @@ -8,6 +8,7 @@ #include <asm/page.h> #include <asm/byteorder.h> +#include <asm/synch.h> #include <asm/mmu.h> #define SIO_CONFIG_RA 0x398 @@ -440,16 +441,6 @@ extern inline void * phys_to_virt(unsigned long address) #define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) #define page_to_bus(page) (page_to_phys(page) + PCI_DRAM_OFFSET) -/* - * Enforce In-order Execution of I/O: - * Acts as a barrier to ensure all previous I/O accesses have - * completed before any further ones are issued. - */ -extern inline void eieio(void) -{ - __asm__ __volatile__ ("eieio" : : : "memory"); -} - /* Enforce in-order execution of data I/O. * No distinction between read/write on PPC; use eieio for all three. */ diff --git a/include/asm-ppc/ipcbuf.h b/include/asm-ppc/ipcbuf.h deleted file mode 100644 index fab6752c748..00000000000 --- a/include/asm-ppc/ipcbuf.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef __PPC_IPCBUF_H__ -#define __PPC_IPCBUF_H__ - -/* - * The ipc64_perm structure for PPC architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 1 32-bit value to fill up for 8-byte alignment - * - 2 miscellaneous 64-bit values (so that this structure matches - * PPC64 ipc64_perm) - */ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid_t uid; - __kernel_gid_t gid; - __kernel_uid_t cuid; - __kernel_gid_t cgid; - __kernel_mode_t mode; - unsigned long seq; - unsigned int __pad2; - unsigned long long __unused1; - unsigned long long __unused2; -}; - -#endif /* __PPC_IPCBUF_H__ */ diff --git a/include/asm-ppc/irq.h b/include/asm-ppc/irq.h deleted file mode 100644 index bd9674807f0..00000000000 --- a/include/asm-ppc/irq.h +++ /dev/null @@ -1,418 +0,0 @@ -#ifdef __KERNEL__ -#ifndef _ASM_IRQ_H -#define _ASM_IRQ_H - -#include <linux/config.h> -#include <asm/machdep.h> /* ppc_md */ -#include <asm/atomic.h> - -/* - * These constants are used for passing information about interrupt - * signal polarity and level/edge sensing to the low-level PIC chip - * drivers. - */ -#define IRQ_SENSE_MASK 0x1 -#define IRQ_SENSE_LEVEL 0x1 /* interrupt on active level */ -#define IRQ_SENSE_EDGE 0x0 /* interrupt triggered by edge */ - -#define IRQ_POLARITY_MASK 0x2 -#define IRQ_POLARITY_POSITIVE 0x2 /* high level or low->high edge */ -#define IRQ_POLARITY_NEGATIVE 0x0 /* low level or high->low edge */ - -/* - * IRQ line status macro IRQ_PER_CPU is used - */ -#define ARCH_HAS_IRQ_PER_CPU - -#if defined(CONFIG_40x) -#include <asm/ibm4xx.h> - -#ifndef NR_BOARD_IRQS -#define NR_BOARD_IRQS 0 -#endif - -#ifndef UIC_WIDTH /* Number of interrupts per device */ -#define UIC_WIDTH 32 -#endif - -#ifndef NR_UICS /* number of UIC devices */ -#define NR_UICS 1 -#endif - -#if defined (CONFIG_403) -/* - * The PowerPC 403 cores' Asynchronous Interrupt Controller (AIC) has - * 32 possible interrupts, a majority of which are not implemented on - * all cores. There are six configurable, external interrupt pins and - * there are eight internal interrupts for the on-chip serial port - * (SPU), DMA controller, and JTAG controller. - * - */ - -#define NR_AIC_IRQS 32 -#define NR_IRQS (NR_AIC_IRQS + NR_BOARD_IRQS) - -#elif !defined (CONFIG_403) - -/* - * The PowerPC 405 cores' Universal Interrupt Controller (UIC) has 32 - * possible interrupts as well. There are seven, configurable external - * interrupt pins and there are 17 internal interrupts for the on-chip - * serial port, DMA controller, on-chip Ethernet controller, PCI, etc. - * - */ - - -#define NR_UIC_IRQS UIC_WIDTH -#define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS) -#endif -static __inline__ int -irq_canonicalize(int irq) -{ - return (irq); -} - -#elif defined(CONFIG_44x) -#include <asm/ibm44x.h> - -#define NR_UIC_IRQS 32 -#define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS) - -static __inline__ int -irq_canonicalize(int irq) -{ - return (irq); -} - -#elif defined(CONFIG_8xx) - -/* Now include the board configuration specific associations. -*/ -#include <asm/mpc8xx.h> - -/* The MPC8xx cores have 16 possible interrupts. There are eight - * possible level sensitive interrupts assigned and generated internally - * from such devices as CPM, PCMCIA, RTC, PIT, TimeBase and Decrementer. - * There are eight external interrupts (IRQs) that can be configured - * as either level or edge sensitive. - * - * On some implementations, there is also the possibility of an 8259 - * through the PCI and PCI-ISA bridges. - * - * We are "flattening" the interrupt vectors of the cascaded CPM - * and 8259 interrupt controllers so that we can uniquely identify - * any interrupt source with a single integer. - */ -#define NR_SIU_INTS 16 -#define NR_CPM_INTS 32 -#ifndef NR_8259_INTS -#define NR_8259_INTS 0 -#endif - -#define SIU_IRQ_OFFSET 0 -#define CPM_IRQ_OFFSET (SIU_IRQ_OFFSET + NR_SIU_INTS) -#define I8259_IRQ_OFFSET (CPM_IRQ_OFFSET + NR_CPM_INTS) - -#define NR_IRQS (NR_SIU_INTS + NR_CPM_INTS + NR_8259_INTS) - -/* These values must be zero-based and map 1:1 with the SIU configuration. - * They are used throughout the 8xx I/O subsystem to generate - * interrupt masks, flags, and other control patterns. This is why the - * current kernel assumption of the 8259 as the base controller is such - * a pain in the butt. - */ -#define SIU_IRQ0 (0) /* Highest priority */ -#define SIU_LEVEL0 (1) -#define SIU_IRQ1 (2) -#define SIU_LEVEL1 (3) -#define SIU_IRQ2 (4) -#define SIU_LEVEL2 (5) -#define SIU_IRQ3 (6) -#define SIU_LEVEL3 (7) -#define SIU_IRQ4 (8) -#define SIU_LEVEL4 (9) -#define SIU_IRQ5 (10) -#define SIU_LEVEL5 (11) -#define SIU_IRQ6 (12) -#define SIU_LEVEL6 (13) -#define SIU_IRQ7 (14) -#define SIU_LEVEL7 (15) - -#define MPC8xx_INT_FEC1 SIU_LEVEL1 -#define MPC8xx_INT_FEC2 SIU_LEVEL3 - -#define MPC8xx_INT_SCC1 (CPM_IRQ_OFFSET + CPMVEC_SCC1) -#define MPC8xx_INT_SCC2 (CPM_IRQ_OFFSET + CPMVEC_SCC2) -#define MPC8xx_INT_SCC3 (CPM_IRQ_OFFSET + CPMVEC_SCC3) -#define MPC8xx_INT_SCC4 (CPM_IRQ_OFFSET + CPMVEC_SCC4) -#define MPC8xx_INT_SMC1 (CPM_IRQ_OFFSET + CPMVEC_SMC1) -#define MPC8xx_INT_SMC2 (CPM_IRQ_OFFSET + CPMVEC_SMC2) - -/* The internal interrupts we can configure as we see fit. - * My personal preference is CPM at level 2, which puts it above the - * MBX PCI/ISA/IDE interrupts. - */ -#ifndef PIT_INTERRUPT -#define PIT_INTERRUPT SIU_LEVEL0 -#endif -#ifndef CPM_INTERRUPT -#define CPM_INTERRUPT SIU_LEVEL2 -#endif -#ifndef PCMCIA_INTERRUPT -#define PCMCIA_INTERRUPT SIU_LEVEL6 -#endif -#ifndef DEC_INTERRUPT -#define DEC_INTERRUPT SIU_LEVEL7 -#endif - -/* Some internal interrupt registers use an 8-bit mask for the interrupt - * level instead of a number. - */ -#define mk_int_int_mask(IL) (1 << (7 - (IL/2))) - -/* always the same on 8xx -- Cort */ -static __inline__ int irq_canonicalize(int irq) -{ - return irq; -} - -#elif defined(CONFIG_83xx) -#include <asm/mpc83xx.h> - -static __inline__ int irq_canonicalize(int irq) -{ - return irq; -} - -#define NR_IRQS (NR_IPIC_INTS) - -#elif defined(CONFIG_85xx) -/* Now include the board configuration specific associations. -*/ -#include <asm/mpc85xx.h> - -/* The MPC8548 openpic has 48 internal interrupts and 12 external - * interrupts. - * - * We are "flattening" the interrupt vectors of the cascaded CPM - * so that we can uniquely identify any interrupt source with a - * single integer. - */ -#define NR_CPM_INTS 64 -#define NR_EPIC_INTS 60 -#ifndef NR_8259_INTS -#define NR_8259_INTS 0 -#endif -#define NUM_8259_INTERRUPTS NR_8259_INTS - -#ifndef CPM_IRQ_OFFSET -#define CPM_IRQ_OFFSET 0 -#endif - -#define NR_IRQS (NR_EPIC_INTS + NR_CPM_INTS + NR_8259_INTS) - -/* Internal IRQs on MPC85xx OpenPIC */ - -#ifndef MPC85xx_OPENPIC_IRQ_OFFSET -#ifdef CONFIG_CPM2 -#define MPC85xx_OPENPIC_IRQ_OFFSET (CPM_IRQ_OFFSET + NR_CPM_INTS) -#else -#define MPC85xx_OPENPIC_IRQ_OFFSET 0 -#endif -#endif - -/* Not all of these exist on all MPC85xx implementations */ -#define MPC85xx_IRQ_L2CACHE ( 0 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_ECM ( 1 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_DDR ( 2 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_LBIU ( 3 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_DMA0 ( 4 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_DMA1 ( 5 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_DMA2 ( 6 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_DMA3 ( 7 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_PCI1 ( 8 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_PCI2 ( 9 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_RIO_ERROR ( 9 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_RIO_BELL (10 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_RIO_TX (11 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_RIO_RX (12 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_TSEC1_TX (13 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_TSEC1_RX (14 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_TSEC3_TX (15 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_TSEC3_RX (16 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_TSEC3_ERROR (17 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_TSEC1_ERROR (18 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_TSEC2_TX (19 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_TSEC2_RX (20 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_TSEC4_TX (21 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_TSEC4_RX (22 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_TSEC4_ERROR (23 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_TSEC2_ERROR (24 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_FEC (25 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_DUART (26 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_IIC1 (27 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_PERFMON (28 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_SEC2 (29 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_CPM (30 + MPC85xx_OPENPIC_IRQ_OFFSET) - -/* The 12 external interrupt lines */ -#define MPC85xx_IRQ_EXT0 (48 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_EXT1 (49 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_EXT2 (50 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_EXT3 (51 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_EXT4 (52 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_EXT5 (53 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_EXT6 (54 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_EXT7 (55 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_EXT8 (56 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_EXT9 (57 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_EXT10 (58 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_EXT11 (59 + MPC85xx_OPENPIC_IRQ_OFFSET) - -/* CPM related interrupts */ -#define SIU_INT_ERROR ((uint)0x00+CPM_IRQ_OFFSET) -#define SIU_INT_I2C ((uint)0x01+CPM_IRQ_OFFSET) -#define SIU_INT_SPI ((uint)0x02+CPM_IRQ_OFFSET) -#define SIU_INT_RISC ((uint)0x03+CPM_IRQ_OFFSET) -#define SIU_INT_SMC1 ((uint)0x04+CPM_IRQ_OFFSET) -#define SIU_INT_SMC2 ((uint)0x05+CPM_IRQ_OFFSET) -#define SIU_INT_USB ((uint)0x0b+CPM_IRQ_OFFSET) -#define SIU_INT_TIMER1 ((uint)0x0c+CPM_IRQ_OFFSET) -#define SIU_INT_TIMER2 ((uint)0x0d+CPM_IRQ_OFFSET) -#define SIU_INT_TIMER3 ((uint)0x0e+CPM_IRQ_OFFSET) -#define SIU_INT_TIMER4 ((uint)0x0f+CPM_IRQ_OFFSET) -#define SIU_INT_FCC1 ((uint)0x20+CPM_IRQ_OFFSET) -#define SIU_INT_FCC2 ((uint)0x21+CPM_IRQ_OFFSET) -#define SIU_INT_FCC3 ((uint)0x22+CPM_IRQ_OFFSET) -#define SIU_INT_MCC1 ((uint)0x24+CPM_IRQ_OFFSET) -#define SIU_INT_MCC2 ((uint)0x25+CPM_IRQ_OFFSET) -#define SIU_INT_SCC1 ((uint)0x28+CPM_IRQ_OFFSET) -#define SIU_INT_SCC2 ((uint)0x29+CPM_IRQ_OFFSET) -#define SIU_INT_SCC3 ((uint)0x2a+CPM_IRQ_OFFSET) -#define SIU_INT_SCC4 ((uint)0x2b+CPM_IRQ_OFFSET) -#define SIU_INT_PC15 ((uint)0x30+CPM_IRQ_OFFSET) -#define SIU_INT_PC14 ((uint)0x31+CPM_IRQ_OFFSET) -#define SIU_INT_PC13 ((uint)0x32+CPM_IRQ_OFFSET) -#define SIU_INT_PC12 ((uint)0x33+CPM_IRQ_OFFSET) -#define SIU_INT_PC11 ((uint)0x34+CPM_IRQ_OFFSET) -#define SIU_INT_PC10 ((uint)0x35+CPM_IRQ_OFFSET) -#define SIU_INT_PC9 ((uint)0x36+CPM_IRQ_OFFSET) -#define SIU_INT_PC8 ((uint)0x37+CPM_IRQ_OFFSET) -#define SIU_INT_PC7 ((uint)0x38+CPM_IRQ_OFFSET) -#define SIU_INT_PC6 ((uint)0x39+CPM_IRQ_OFFSET) -#define SIU_INT_PC5 ((uint)0x3a+CPM_IRQ_OFFSET) -#define SIU_INT_PC4 ((uint)0x3b+CPM_IRQ_OFFSET) -#define SIU_INT_PC3 ((uint)0x3c+CPM_IRQ_OFFSET) -#define SIU_INT_PC2 ((uint)0x3d+CPM_IRQ_OFFSET) -#define SIU_INT_PC1 ((uint)0x3e+CPM_IRQ_OFFSET) -#define SIU_INT_PC0 ((uint)0x3f+CPM_IRQ_OFFSET) - -static __inline__ int irq_canonicalize(int irq) -{ - return irq; -} - -#else /* CONFIG_40x + CONFIG_8xx */ -/* - * this is the # irq's for all ppc arch's (pmac/chrp/prep) - * so it is the max of them all - */ -#define NR_IRQS 256 - -#ifndef CONFIG_8260 - -#define NUM_8259_INTERRUPTS 16 - -#else /* CONFIG_8260 */ - -/* The 8260 has an internal interrupt controller with a maximum of - * 64 IRQs. We will use NR_IRQs from above since it is large enough. - * Don't be confused by the 8260 documentation where they list an - * "interrupt number" and "interrupt vector". We are only interested - * in the interrupt vector. There are "reserved" holes where the - * vector number increases, but the interrupt number in the table does not. - * (Document errata updates have fixed this...make sure you have up to - * date processor documentation -- Dan). - */ - -#ifndef CPM_IRQ_OFFSET -#define CPM_IRQ_OFFSET 0 -#endif - -#define NR_CPM_INTS 64 - -#define SIU_INT_ERROR ((uint)0x00 + CPM_IRQ_OFFSET) -#define SIU_INT_I2C ((uint)0x01 + CPM_IRQ_OFFSET) -#define SIU_INT_SPI ((uint)0x02 + CPM_IRQ_OFFSET) -#define SIU_INT_RISC ((uint)0x03 + CPM_IRQ_OFFSET) -#define SIU_INT_SMC1 ((uint)0x04 + CPM_IRQ_OFFSET) -#define SIU_INT_SMC2 ((uint)0x05 + CPM_IRQ_OFFSET) -#define SIU_INT_IDMA1 ((uint)0x06 + CPM_IRQ_OFFSET) -#define SIU_INT_IDMA2 ((uint)0x07 + CPM_IRQ_OFFSET) -#define SIU_INT_IDMA3 ((uint)0x08 + CPM_IRQ_OFFSET) -#define SIU_INT_IDMA4 ((uint)0x09 + CPM_IRQ_OFFSET) -#define SIU_INT_SDMA ((uint)0x0a + CPM_IRQ_OFFSET) -#define SIU_INT_USB ((uint)0x0b + CPM_IRQ_OFFSET) -#define SIU_INT_TIMER1 ((uint)0x0c + CPM_IRQ_OFFSET) -#define SIU_INT_TIMER2 ((uint)0x0d + CPM_IRQ_OFFSET) -#define SIU_INT_TIMER3 ((uint)0x0e + CPM_IRQ_OFFSET) -#define SIU_INT_TIMER4 ((uint)0x0f + CPM_IRQ_OFFSET) -#define SIU_INT_TMCNT ((uint)0x10 + CPM_IRQ_OFFSET) -#define SIU_INT_PIT ((uint)0x11 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ1 ((uint)0x13 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ2 ((uint)0x14 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ3 ((uint)0x15 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ4 ((uint)0x16 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ5 ((uint)0x17 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ6 ((uint)0x18 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ7 ((uint)0x19 + CPM_IRQ_OFFSET) -#define SIU_INT_FCC1 ((uint)0x20 + CPM_IRQ_OFFSET) -#define SIU_INT_FCC2 ((uint)0x21 + CPM_IRQ_OFFSET) -#define SIU_INT_FCC3 ((uint)0x22 + CPM_IRQ_OFFSET) -#define SIU_INT_MCC1 ((uint)0x24 + CPM_IRQ_OFFSET) -#define SIU_INT_MCC2 ((uint)0x25 + CPM_IRQ_OFFSET) -#define SIU_INT_SCC1 ((uint)0x28 + CPM_IRQ_OFFSET) -#define SIU_INT_SCC2 ((uint)0x29 + CPM_IRQ_OFFSET) -#define SIU_INT_SCC3 ((uint)0x2a + CPM_IRQ_OFFSET) -#define SIU_INT_SCC4 ((uint)0x2b + CPM_IRQ_OFFSET) -#define SIU_INT_PC15 ((uint)0x30 + CPM_IRQ_OFFSET) -#define SIU_INT_PC14 ((uint)0x31 + CPM_IRQ_OFFSET) -#define SIU_INT_PC13 ((uint)0x32 + CPM_IRQ_OFFSET) -#define SIU_INT_PC12 ((uint)0x33 + CPM_IRQ_OFFSET) -#define SIU_INT_PC11 ((uint)0x34 + CPM_IRQ_OFFSET) -#define SIU_INT_PC10 ((uint)0x35 + CPM_IRQ_OFFSET) -#define SIU_INT_PC9 ((uint)0x36 + CPM_IRQ_OFFSET) -#define SIU_INT_PC8 ((uint)0x37 + CPM_IRQ_OFFSET) -#define SIU_INT_PC7 ((uint)0x38 + CPM_IRQ_OFFSET) -#define SIU_INT_PC6 ((uint)0x39 + CPM_IRQ_OFFSET) -#define SIU_INT_PC5 ((uint)0x3a + CPM_IRQ_OFFSET) -#define SIU_INT_PC4 ((uint)0x3b + CPM_IRQ_OFFSET) -#define SIU_INT_PC3 ((uint)0x3c + CPM_IRQ_OFFSET) -#define SIU_INT_PC2 ((uint)0x3d + CPM_IRQ_OFFSET) -#define SIU_INT_PC1 ((uint)0x3e + CPM_IRQ_OFFSET) -#define SIU_INT_PC0 ((uint)0x3f + CPM_IRQ_OFFSET) - -#endif /* CONFIG_8260 */ - -/* - * This gets called from serial.c, which is now used on - * powermacs as well as prep/chrp boxes. - * Prep and chrp both have cascaded 8259 PICs. - */ -static __inline__ int irq_canonicalize(int irq) -{ - if (ppc_md.irq_canonicalize) - return ppc_md.irq_canonicalize(irq); - return irq; -} - -#endif - -#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) -/* pedantic: these are long because they are used with set_bit --RR */ -extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; -extern unsigned long ppc_lost_interrupts[NR_MASK_WORDS]; -extern atomic_t ppc_n_lost_interrupts; - -#endif /* _ASM_IRQ_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/kexec.h b/include/asm-ppc/kexec.h deleted file mode 100644 index 6d2aa0aa464..00000000000 --- a/include/asm-ppc/kexec.h +++ /dev/null @@ -1,40 +0,0 @@ -#ifndef _PPC_KEXEC_H -#define _PPC_KEXEC_H - -#ifdef CONFIG_KEXEC - -/* - * KEXEC_SOURCE_MEMORY_LIMIT maximum page get_free_page can return. - * I.e. Maximum page that is mapped directly into kernel memory, - * and kmap is not required. - * - * Someone correct me if FIXADDR_START - PAGEOFFSET is not the correct - * calculation for the amount of memory directly mappable into the - * kernel memory space. - */ - -/* Maximum physical address we can use pages from */ -#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL) -/* Maximum address we can reach in physical address mode */ -#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL) -/* Maximum address we can use for the control code buffer */ -#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE - -#define KEXEC_CONTROL_CODE_SIZE 4096 - -/* The native architecture */ -#define KEXEC_ARCH KEXEC_ARCH_PPC - -#ifndef __ASSEMBLY__ - -extern void *crash_notes; - -struct kimage; - -extern void machine_kexec_simple(struct kimage *image); - -#endif /* __ASSEMBLY__ */ - -#endif /* CONFIG_KEXEC */ - -#endif /* _PPC_KEXEC_H */ diff --git a/include/asm-ppc/keylargo.h b/include/asm-ppc/keylargo.h deleted file mode 100644 index a669a3f0f5a..00000000000 --- a/include/asm-ppc/keylargo.h +++ /dev/null @@ -1,248 +0,0 @@ -/* - * keylargo.h: definitions for using the "KeyLargo" I/O controller chip. - * - */ - -/* "Pangea" chipset has keylargo device-id 0x25 while core99 - * has device-id 0x22. The rev. of the pangea one is 0, so we - * fake an artificial rev. in keylargo_rev by oring 0x100 - */ -#define KL_PANGEA_REV 0x100 - -/* offset from base for feature control registers */ -#define KEYLARGO_MBCR 0x34 /* KL Only, Media bay control/status */ -#define KEYLARGO_FCR0 0x38 -#define KEYLARGO_FCR1 0x3c -#define KEYLARGO_FCR2 0x40 -#define KEYLARGO_FCR3 0x44 -#define KEYLARGO_FCR4 0x48 -#define KEYLARGO_FCR5 0x4c /* Pangea only */ - -/* K2 aditional FCRs */ -#define K2_FCR6 0x34 -#define K2_FCR7 0x30 -#define K2_FCR8 0x2c -#define K2_FCR9 0x28 -#define K2_FCR10 0x24 - -/* GPIO registers */ -#define KEYLARGO_GPIO_LEVELS0 0x50 -#define KEYLARGO_GPIO_LEVELS1 0x54 -#define KEYLARGO_GPIO_EXTINT_0 0x58 -#define KEYLARGO_GPIO_EXTINT_CNT 18 -#define KEYLARGO_GPIO_0 0x6A -#define KEYLARGO_GPIO_CNT 17 -#define KEYLARGO_GPIO_EXTINT_DUAL_EDGE 0x80 -#define KEYLARGO_GPIO_OUTPUT_ENABLE 0x04 -#define KEYLARGO_GPIO_OUTOUT_DATA 0x01 -#define KEYLARGO_GPIO_INPUT_DATA 0x02 - -/* K2 does only extint GPIOs and does 51 of them */ -#define K2_GPIO_EXTINT_0 0x58 -#define K2_GPIO_EXTINT_CNT 51 - -/* Specific GPIO regs */ - -#define KL_GPIO_MODEM_RESET (KEYLARGO_GPIO_0+0x03) -#define KL_GPIO_MODEM_POWER (KEYLARGO_GPIO_0+0x02) /* Pangea */ - -#define KL_GPIO_SOUND_POWER (KEYLARGO_GPIO_0+0x05) - -/* Hrm... this one is only to be used on Pismo. It seeem to also - * control the timebase enable on other machines. Still to be - * experimented... --BenH. - */ -#define KL_GPIO_FW_CABLE_POWER (KEYLARGO_GPIO_0+0x09) -#define KL_GPIO_TB_ENABLE (KEYLARGO_GPIO_0+0x09) - -#define KL_GPIO_ETH_PHY_RESET (KEYLARGO_GPIO_0+0x10) - -#define KL_GPIO_EXTINT_CPU1 (KEYLARGO_GPIO_0+0x0a) -#define KL_GPIO_EXTINT_CPU1_ASSERT 0x04 -#define KL_GPIO_EXTINT_CPU1_RELEASE 0x38 - -#define KL_GPIO_RESET_CPU0 (KEYLARGO_GPIO_EXTINT_0+0x03) -#define KL_GPIO_RESET_CPU1 (KEYLARGO_GPIO_EXTINT_0+0x04) -#define KL_GPIO_RESET_CPU2 (KEYLARGO_GPIO_EXTINT_0+0x0f) -#define KL_GPIO_RESET_CPU3 (KEYLARGO_GPIO_EXTINT_0+0x10) - -#define KL_GPIO_PMU_MESSAGE_IRQ (KEYLARGO_GPIO_EXTINT_0+0x09) -#define KL_GPIO_PMU_MESSAGE_BIT KEYLARGO_GPIO_INPUT_DATA - -#define KL_GPIO_MEDIABAY_IRQ (KEYLARGO_GPIO_EXTINT_0+0x0e) - -#define KL_GPIO_AIRPORT_0 (KEYLARGO_GPIO_EXTINT_0+0x0a) -#define KL_GPIO_AIRPORT_1 (KEYLARGO_GPIO_EXTINT_0+0x0d) -#define KL_GPIO_AIRPORT_2 (KEYLARGO_GPIO_0+0x0d) -#define KL_GPIO_AIRPORT_3 (KEYLARGO_GPIO_0+0x0e) -#define KL_GPIO_AIRPORT_4 (KEYLARGO_GPIO_0+0x0f) - -/* - * Bits in feature control register. Those bits different for K2 are - * listed separately - */ -#define KL_MBCR_MB0_PCI_ENABLE 0x00000800 /* exist ? */ -#define KL_MBCR_MB0_IDE_ENABLE 0x00001000 -#define KL_MBCR_MB0_FLOPPY_ENABLE 0x00002000 /* exist ? */ -#define KL_MBCR_MB0_SOUND_ENABLE 0x00004000 /* hrm... */ -#define KL_MBCR_MB0_DEV_MASK 0x00007800 -#define KL_MBCR_MB0_DEV_POWER 0x00000400 -#define KL_MBCR_MB0_DEV_RESET 0x00000200 -#define KL_MBCR_MB0_ENABLE 0x00000100 -#define KL_MBCR_MB1_PCI_ENABLE 0x08000000 /* exist ? */ -#define KL_MBCR_MB1_IDE_ENABLE 0x10000000 -#define KL_MBCR_MB1_FLOPPY_ENABLE 0x20000000 /* exist ? */ -#define KL_MBCR_MB1_SOUND_ENABLE 0x40000000 /* hrm... */ -#define KL_MBCR_MB1_DEV_MASK 0x78000000 -#define KL_MBCR_MB1_DEV_POWER 0x04000000 -#define KL_MBCR_MB1_DEV_RESET 0x02000000 -#define KL_MBCR_MB1_ENABLE 0x01000000 - -#define KL0_SCC_B_INTF_ENABLE 0x00000001 /* (KL Only) */ -#define KL0_SCC_A_INTF_ENABLE 0x00000002 -#define KL0_SCC_SLOWPCLK 0x00000004 -#define KL0_SCC_RESET 0x00000008 -#define KL0_SCCA_ENABLE 0x00000010 -#define KL0_SCCB_ENABLE 0x00000020 -#define KL0_SCC_CELL_ENABLE 0x00000040 -#define KL0_IRDA_HIGH_BAND 0x00000100 /* (KL Only) */ -#define KL0_IRDA_SOURCE2_SEL 0x00000200 /* (KL Only) */ -#define KL0_IRDA_SOURCE1_SEL 0x00000400 /* (KL Only) */ -#define KL0_PG_USB0_PMI_ENABLE 0x00000400 /* (Pangea/Intrepid Only) */ -#define KL0_IRDA_RESET 0x00000800 /* (KL Only) */ -#define KL0_PG_USB0_REF_SUSPEND_SEL 0x00000800 /* (Pangea/Intrepid Only) */ -#define KL0_IRDA_DEFAULT1 0x00001000 /* (KL Only) */ -#define KL0_PG_USB0_REF_SUSPEND 0x00001000 /* (Pangea/Intrepid Only) */ -#define KL0_IRDA_DEFAULT0 0x00002000 /* (KL Only) */ -#define KL0_PG_USB0_PAD_SUSPEND 0x00002000 /* (Pangea/Intrepid Only) */ -#define KL0_IRDA_FAST_CONNECT 0x00004000 /* (KL Only) */ -#define KL0_PG_USB1_PMI_ENABLE 0x00004000 /* (Pangea/Intrepid Only) */ -#define KL0_IRDA_ENABLE 0x00008000 /* (KL Only) */ -#define KL0_PG_USB1_REF_SUSPEND_SEL 0x00008000 /* (Pangea/Intrepid Only) */ -#define KL0_IRDA_CLK32_ENABLE 0x00010000 /* (KL Only) */ -#define KL0_PG_USB1_REF_SUSPEND 0x00010000 /* (Pangea/Intrepid Only) */ -#define KL0_IRDA_CLK19_ENABLE 0x00020000 /* (KL Only) */ -#define KL0_PG_USB1_PAD_SUSPEND 0x00020000 /* (Pangea/Intrepid Only) */ -#define KL0_USB0_PAD_SUSPEND0 0x00040000 -#define KL0_USB0_PAD_SUSPEND1 0x00080000 -#define KL0_USB0_CELL_ENABLE 0x00100000 -#define KL0_USB1_PAD_SUSPEND0 0x00400000 -#define KL0_USB1_PAD_SUSPEND1 0x00800000 -#define KL0_USB1_CELL_ENABLE 0x01000000 -#define KL0_USB_REF_SUSPEND 0x10000000 /* (KL Only) */ - -#define KL0_SERIAL_ENABLE (KL0_SCC_B_INTF_ENABLE | \ - KL0_SCC_SLOWPCLK | \ - KL0_SCC_CELL_ENABLE | KL0_SCCA_ENABLE) - -#define KL1_USB2_PMI_ENABLE 0x00000001 /* Intrepid only */ -#define KL1_AUDIO_SEL_22MCLK 0x00000002 /* KL/Pangea only */ -#define KL1_USB2_REF_SUSPEND_SEL 0x00000002 /* Intrepid only */ -#define KL1_USB2_REF_SUSPEND 0x00000004 /* Intrepid only */ -#define KL1_AUDIO_CLK_ENABLE_BIT 0x00000008 /* KL/Pangea only */ -#define KL1_USB2_PAD_SUSPEND_SEL 0x00000008 /* Intrepid only */ -#define KL1_USB2_PAD_SUSPEND0 0x00000010 /* Intrepid only */ -#define KL1_AUDIO_CLK_OUT_ENABLE 0x00000020 /* KL/Pangea only */ -#define KL1_USB2_PAD_SUSPEND1 0x00000020 /* Intrepid only */ -#define KL1_AUDIO_CELL_ENABLE 0x00000040 /* KL/Pangea only */ -#define KL1_USB2_CELL_ENABLE 0x00000040 /* Intrepid only */ -#define KL1_AUDIO_CHOOSE 0x00000080 /* KL/Pangea only */ -#define KL1_I2S0_CHOOSE 0x00000200 /* KL Only */ -#define KL1_I2S0_CELL_ENABLE 0x00000400 -#define KL1_I2S0_CLK_ENABLE_BIT 0x00001000 -#define KL1_I2S0_ENABLE 0x00002000 -#define KL1_I2S1_CELL_ENABLE 0x00020000 -#define KL1_I2S1_CLK_ENABLE_BIT 0x00080000 -#define KL1_I2S1_ENABLE 0x00100000 -#define KL1_EIDE0_ENABLE 0x00800000 /* KL/Intrepid Only */ -#define KL1_EIDE0_RESET_N 0x01000000 /* KL/Intrepid Only */ -#define KL1_EIDE1_ENABLE 0x04000000 /* KL Only */ -#define KL1_EIDE1_RESET_N 0x08000000 /* KL Only */ -#define KL1_UIDE_ENABLE 0x20000000 /* KL/Pangea Only */ -#define KL1_UIDE_RESET_N 0x40000000 /* KL/Pangea Only */ - -#define KL2_IOBUS_ENABLE 0x00000002 -#define KL2_SLEEP_STATE_BIT 0x00000100 /* KL Only */ -#define KL2_PG_STOP_ALL_CLOCKS 0x00000100 /* Pangea Only */ -#define KL2_MPIC_ENABLE 0x00020000 -#define KL2_CARDSLOT_RESET 0x00040000 /* Pangea/Intrepid Only */ -#define KL2_ALT_DATA_OUT 0x02000000 /* KL Only ??? */ -#define KL2_MEM_IS_BIG 0x04000000 -#define KL2_CARDSEL_16 0x08000000 - -#define KL3_SHUTDOWN_PLL_TOTAL 0x00000001 /* KL/Pangea only */ -#define KL3_SHUTDOWN_PLLKW6 0x00000002 /* KL/Pangea only */ -#define KL3_IT_SHUTDOWN_PLL3 0x00000002 /* Intrepid only */ -#define KL3_SHUTDOWN_PLLKW4 0x00000004 /* KL/Pangea only */ -#define KL3_IT_SHUTDOWN_PLL2 0x00000004 /* Intrepid only */ -#define KL3_SHUTDOWN_PLLKW35 0x00000008 /* KL/Pangea only */ -#define KL3_IT_SHUTDOWN_PLL1 0x00000008 /* Intrepid only */ -#define KL3_SHUTDOWN_PLLKW12 0x00000010 /* KL Only */ -#define KL3_IT_ENABLE_PLL3_SHUTDOWN 0x00000010 /* Intrepid only */ -#define KL3_PLL_RESET 0x00000020 /* KL/Pangea only */ -#define KL3_IT_ENABLE_PLL2_SHUTDOWN 0x00000020 /* Intrepid only */ -#define KL3_IT_ENABLE_PLL1_SHUTDOWN 0x00000010 /* Intrepid only */ -#define KL3_SHUTDOWN_PLL2X 0x00000080 /* KL Only */ -#define KL3_CLK66_ENABLE 0x00000100 /* KL Only */ -#define KL3_CLK49_ENABLE 0x00000200 -#define KL3_CLK45_ENABLE 0x00000400 -#define KL3_CLK31_ENABLE 0x00000800 /* KL/Pangea only */ -#define KL3_TIMER_CLK18_ENABLE 0x00001000 -#define KL3_I2S1_CLK18_ENABLE 0x00002000 -#define KL3_I2S0_CLK18_ENABLE 0x00004000 -#define KL3_VIA_CLK16_ENABLE 0x00008000 /* KL/Pangea only */ -#define KL3_IT_VIA_CLK32_ENABLE 0x00008000 /* Intrepid only */ -#define KL3_STOPPING33_ENABLED 0x00080000 /* KL Only */ -#define KL3_PG_PLL_ENABLE_TEST 0x00080000 /* Pangea Only */ - -/* Intrepid USB bus 2, port 0,1 */ -#define KL3_IT_PORT_WAKEUP_ENABLE(p) (0x00080000 << ((p)<<3)) -#define KL3_IT_PORT_RESUME_WAKE_EN(p) (0x00040000 << ((p)<<3)) -#define KL3_IT_PORT_CONNECT_WAKE_EN(p) (0x00020000 << ((p)<<3)) -#define KL3_IT_PORT_DISCONNECT_WAKE_EN(p) (0x00010000 << ((p)<<3)) -#define KL3_IT_PORT_RESUME_STAT(p) (0x00300000 << ((p)<<3)) -#define KL3_IT_PORT_CONNECT_STAT(p) (0x00200000 << ((p)<<3)) -#define KL3_IT_PORT_DISCONNECT_STAT(p) (0x00100000 << ((p)<<3)) - -/* Port 0,1 : bus 0, port 2,3 : bus 1 */ -#define KL4_PORT_WAKEUP_ENABLE(p) (0x00000008 << ((p)<<3)) -#define KL4_PORT_RESUME_WAKE_EN(p) (0x00000004 << ((p)<<3)) -#define KL4_PORT_CONNECT_WAKE_EN(p) (0x00000002 << ((p)<<3)) -#define KL4_PORT_DISCONNECT_WAKE_EN(p) (0x00000001 << ((p)<<3)) -#define KL4_PORT_RESUME_STAT(p) (0x00000040 << ((p)<<3)) -#define KL4_PORT_CONNECT_STAT(p) (0x00000020 << ((p)<<3)) -#define KL4_PORT_DISCONNECT_STAT(p) (0x00000010 << ((p)<<3)) - -/* Pangea and Intrepid only */ -#define KL5_VIA_USE_CLK31 0000000001 /* Pangea Only */ -#define KL5_SCC_USE_CLK31 0x00000002 /* Pangea Only */ -#define KL5_PWM_CLK32_EN 0x00000004 -#define KL5_CLK3_68_EN 0x00000010 -#define KL5_CLK32_EN 0x00000020 - - -/* K2 definitions */ -#define K2_FCR0_USB0_SWRESET 0x00200000 -#define K2_FCR0_USB1_SWRESET 0x02000000 -#define K2_FCR0_RING_PME_DISABLE 0x08000000 - -#define K2_FCR1_PCI1_BUS_RESET_N 0x00000010 -#define K2_FCR1_PCI1_SLEEP_RESET_EN 0x00000020 -#define K2_FCR1_I2S0_CELL_ENABLE 0x00000400 -#define K2_FCR1_I2S0_RESET 0x00000800 -#define K2_FCR1_I2S0_CLK_ENABLE_BIT 0x00001000 -#define K2_FCR1_I2S0_ENABLE 0x00002000 - -#define K2_FCR1_PCI1_CLK_ENABLE 0x00004000 -#define K2_FCR1_FW_CLK_ENABLE 0x00008000 -#define K2_FCR1_FW_RESET_N 0x00010000 -#define K2_FCR1_GMAC_CLK_ENABLE 0x00400000 -#define K2_FCR1_GMAC_POWER_DOWN 0x00800000 -#define K2_FCR1_GMAC_RESET_N 0x01000000 -#define K2_FCR1_SATA_CLK_ENABLE 0x02000000 -#define K2_FCR1_SATA_POWER_DOWN 0x04000000 -#define K2_FCR1_SATA_RESET_N 0x08000000 -#define K2_FCR1_UATA_CLK_ENABLE 0x10000000 -#define K2_FCR1_UATA_RESET_N 0x40000000 -#define K2_FCR1_UATA_CHOOSE_CLK66 0x80000000 - diff --git a/include/asm-ppc/kmap_types.h b/include/asm-ppc/kmap_types.h deleted file mode 100644 index 6d6fc78731e..00000000000 --- a/include/asm-ppc/kmap_types.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifdef __KERNEL__ -#ifndef _ASM_KMAP_TYPES_H -#define _ASM_KMAP_TYPES_H - -enum km_type { - KM_BOUNCE_READ, - KM_SKB_SUNRPC_DATA, - KM_SKB_DATA_SOFTIRQ, - KM_USER0, - KM_USER1, - KM_BIO_SRC_IRQ, - KM_BIO_DST_IRQ, - KM_PTE0, - KM_PTE1, - KM_IRQ0, - KM_IRQ1, - KM_SOFTIRQ0, - KM_SOFTIRQ1, - KM_PPC_SYNC_PAGE, - KM_PPC_SYNC_ICACHE, - KM_TYPE_NR -}; - -#endif -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/machdep.h b/include/asm-ppc/machdep.h index 1d4ab70a56f..f01255bd1dc 100644 --- a/include/asm-ppc/machdep.h +++ b/include/asm-ppc/machdep.h @@ -98,7 +98,7 @@ struct machdep_calls { /* Get access protection for /dev/mem */ pgprot_t (*phys_mem_access_prot)(struct file *file, - unsigned long offset, + unsigned long pfn, unsigned long size, pgprot_t vma_prot); @@ -167,7 +167,7 @@ extern sys_ctrler_t sys_ctrler; #ifdef CONFIG_SMP struct smp_ops_t { - void (*message_pass)(int target, int msg, unsigned long data, int wait); + void (*message_pass)(int target, int msg); int (*probe)(void); void (*kick_cpu)(int nr); void (*setup_cpu)(int nr); diff --git a/include/asm-ppc/macio.h b/include/asm-ppc/macio.h deleted file mode 100644 index b553dd4b139..00000000000 --- a/include/asm-ppc/macio.h +++ /dev/null @@ -1,140 +0,0 @@ -#ifndef __MACIO_ASIC_H__ -#define __MACIO_ASIC_H__ - -#include <asm/of_device.h> - -extern struct bus_type macio_bus_type; - -/* MacIO device driver is defined later */ -struct macio_driver; -struct macio_chip; - -#define MACIO_DEV_COUNT_RESOURCES 8 -#define MACIO_DEV_COUNT_IRQS 8 - -/* - * the macio_bus structure is used to describe a "virtual" bus - * within a MacIO ASIC. It's typically provided by a macio_pci_asic - * PCI device, but could be provided differently as well (nubus - * machines using a fake OF tree). - * - * The pdev field can be NULL on non-PCI machines - */ -struct macio_bus -{ - struct macio_chip *chip; /* macio_chip (private use) */ - int index; /* macio chip index in system */ -#ifdef CONFIG_PCI - struct pci_dev *pdev; /* PCI device hosting this bus */ -#endif -}; - -/* - * the macio_dev structure is used to describe a device - * within an Apple MacIO ASIC. - */ -struct macio_dev -{ - struct macio_bus *bus; /* macio bus this device is on */ - struct macio_dev *media_bay; /* Device is part of a media bay */ - struct of_device ofdev; - int n_resources; - struct resource resource[MACIO_DEV_COUNT_RESOURCES]; - int n_interrupts; - struct resource interrupt[MACIO_DEV_COUNT_IRQS]; -}; -#define to_macio_device(d) container_of(d, struct macio_dev, ofdev.dev) -#define of_to_macio_device(d) container_of(d, struct macio_dev, ofdev) - -extern struct macio_dev *macio_dev_get(struct macio_dev *dev); -extern void macio_dev_put(struct macio_dev *dev); - -/* - * Accessors to resources & interrupts and other device - * fields - */ - -static inline int macio_resource_count(struct macio_dev *dev) -{ - return dev->n_resources; -} - -static inline unsigned long macio_resource_start(struct macio_dev *dev, int resource_no) -{ - return dev->resource[resource_no].start; -} - -static inline unsigned long macio_resource_end(struct macio_dev *dev, int resource_no) -{ - return dev->resource[resource_no].end; -} - -static inline unsigned long macio_resource_len(struct macio_dev *dev, int resource_no) -{ - struct resource *res = &dev->resource[resource_no]; - if (res->start == 0 || res->end == 0 || res->end < res->start) - return 0; - return res->end - res->start + 1; -} - -extern int macio_request_resource(struct macio_dev *dev, int resource_no, const char *name); -extern void macio_release_resource(struct macio_dev *dev, int resource_no); -extern int macio_request_resources(struct macio_dev *dev, const char *name); -extern void macio_release_resources(struct macio_dev *dev); - -static inline int macio_irq_count(struct macio_dev *dev) -{ - return dev->n_interrupts; -} - -static inline int macio_irq(struct macio_dev *dev, int irq_no) -{ - return dev->interrupt[irq_no].start; -} - -static inline void macio_set_drvdata(struct macio_dev *dev, void *data) -{ - dev_set_drvdata(&dev->ofdev.dev, data); -} - -static inline void* macio_get_drvdata(struct macio_dev *dev) -{ - return dev_get_drvdata(&dev->ofdev.dev); -} - -static inline struct device_node *macio_get_of_node(struct macio_dev *mdev) -{ - return mdev->ofdev.node; -} - -#ifdef CONFIG_PCI -static inline struct pci_dev *macio_get_pci_dev(struct macio_dev *mdev) -{ - return mdev->bus->pdev; -} -#endif - -/* - * A driver for a mac-io chip based device - */ -struct macio_driver -{ - char *name; - struct of_device_id *match_table; - struct module *owner; - - int (*probe)(struct macio_dev* dev, const struct of_device_id *match); - int (*remove)(struct macio_dev* dev); - - int (*suspend)(struct macio_dev* dev, pm_message_t state); - int (*resume)(struct macio_dev* dev); - int (*shutdown)(struct macio_dev* dev); - - struct device_driver driver; -}; -#define to_macio_driver(drv) container_of(drv,struct macio_driver, driver) - -extern int macio_register_driver(struct macio_driver *); -extern void macio_unregister_driver(struct macio_driver *); - -#endif /* __MACIO_ASIC_H__ */ diff --git a/include/asm-ppc/mediabay.h b/include/asm-ppc/mediabay.h deleted file mode 100644 index 9daa3252d7b..00000000000 --- a/include/asm-ppc/mediabay.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * mediabay.h: definitions for using the media bay - * on PowerBook 3400 and similar computers. - * - * Copyright (C) 1997 Paul Mackerras. - */ -#ifndef _PPC_MEDIABAY_H -#define _PPC_MEDIABAY_H - -#ifdef __KERNEL__ - -#define MB_FD 0 /* media bay contains floppy drive (automatic eject ?) */ -#define MB_FD1 1 /* media bay contains floppy drive (manual eject ?) */ -#define MB_SOUND 2 /* sound device ? */ -#define MB_CD 3 /* media bay contains ATA drive such as CD or ZIP */ -#define MB_PCI 5 /* media bay contains a PCI device */ -#define MB_POWER 6 /* media bay contains a Power device (???) */ -#define MB_NO 7 /* media bay contains nothing */ - -int check_media_bay(struct device_node *which_bay, int what); -int check_media_bay_by_base(unsigned long base, int what); - -/* Number of bays in the machine or 0 */ -extern int media_bay_count; - -/* called by pmac-ide.c to register IDE controller for media bay */ -extern int media_bay_set_ide_infos(struct device_node* which_bay, - unsigned long base, int irq, int index); - -#endif /* __KERNEL__ */ -#endif /* _PPC_MEDIABAY_H */ diff --git a/include/asm-ppc/mmu_context.h b/include/asm-ppc/mmu_context.h index afe26ffc2e2..4f152cca13c 100644 --- a/include/asm-ppc/mmu_context.h +++ b/include/asm-ppc/mmu_context.h @@ -164,13 +164,11 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk) { #ifdef CONFIG_ALTIVEC - asm volatile ( - BEGIN_FTR_SECTION - "dssall;\n" + if (cpu_has_feature(CPU_FTR_ALTIVEC)) + asm volatile ("dssall;\n" #ifndef CONFIG_POWER4 "sync;\n" /* G4 needs a sync here, G5 apparently not */ #endif - END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) : : ); #endif /* CONFIG_ALTIVEC */ diff --git a/include/asm-ppc/mpc8260.h b/include/asm-ppc/mpc8260.h index 9694eca16e9..32145269503 100644 --- a/include/asm-ppc/mpc8260.h +++ b/include/asm-ppc/mpc8260.h @@ -92,6 +92,10 @@ enum ppc_sys_devices { extern unsigned char __res[]; #endif +#ifndef BOARD_CHIP_NAME +#define BOARD_CHIP_NAME "" +#endif + #endif /* CONFIG_8260 */ #endif /* !__ASM_PPC_MPC8260_H__ */ #endif /* __KERNEL__ */ diff --git a/include/asm-ppc/mpc85xx.h b/include/asm-ppc/mpc85xx.h index 516984ee14b..d98db980cd4 100644 --- a/include/asm-ppc/mpc85xx.h +++ b/include/asm-ppc/mpc85xx.h @@ -67,6 +67,8 @@ extern unsigned char __res[]; #define MPC85xx_DMA3_SIZE (0x00080) #define MPC85xx_ENET1_OFFSET (0x24000) #define MPC85xx_ENET1_SIZE (0x01000) +#define MPC85xx_MIIM_OFFSET (0x24520) +#define MPC85xx_MIIM_SIZE (0x00018) #define MPC85xx_ENET2_OFFSET (0x25000) #define MPC85xx_ENET2_SIZE (0x01000) #define MPC85xx_ENET3_OFFSET (0x26000) @@ -132,6 +134,7 @@ enum ppc_sys_devices { MPC85xx_eTSEC3, MPC85xx_eTSEC4, MPC85xx_IIC2, + MPC85xx_MDIO, }; /* Internal interrupts are all Level Sensitive, and Positive Polarity */ diff --git a/include/asm-ppc/mpc8xx.h b/include/asm-ppc/mpc8xx.h index 208a2e11dae..46f159cf589 100644 --- a/include/asm-ppc/mpc8xx.h +++ b/include/asm-ppc/mpc8xx.h @@ -113,6 +113,10 @@ enum ppc_sys_devices { MPC8xx_CPM_USB, }; +#ifndef BOARD_CHIP_NAME +#define BOARD_CHIP_NAME "" +#endif + #endif /* !__ASSEMBLY__ */ #endif /* CONFIG_8xx */ #endif /* __CONFIG_8xx_DEFS */ diff --git a/include/asm-ppc/mv64x60.h b/include/asm-ppc/mv64x60.h index ee2f9188cc6..4f2405b8361 100644 --- a/include/asm-ppc/mv64x60.h +++ b/include/asm-ppc/mv64x60.h @@ -27,6 +27,8 @@ #include <asm/pci-bridge.h> #include <asm/mv64x60_defs.h> +struct platform_device; + extern u8 mv64x60_pci_exclude_bridge; extern spinlock_t mv64x60_lock; diff --git a/include/asm-ppc/of_device.h b/include/asm-ppc/of_device.h deleted file mode 100644 index 575bce418f8..00000000000 --- a/include/asm-ppc/of_device.h +++ /dev/null @@ -1,65 +0,0 @@ -#ifndef __OF_DEVICE_H__ -#define __OF_DEVICE_H__ - -#include <linux/device.h> -#include <linux/mod_devicetable.h> -#include <asm/prom.h> - -/* - * The of_platform_bus_type is a bus type used by drivers that do not - * attach to a macio or similar bus but still use OF probing - * mecanism - */ -extern struct bus_type of_platform_bus_type; - -/* - * The of_device is a kind of "base class" that is a superset of - * struct device for use by devices attached to an OF node and - * probed using OF properties - */ -struct of_device -{ - struct device_node *node; /* OF device node */ - u64 dma_mask; /* DMA mask */ - struct device dev; /* Generic device interface */ -}; -#define to_of_device(d) container_of(d, struct of_device, dev) - -extern const struct of_device_id *of_match_device( - const struct of_device_id *matches, const struct of_device *dev); - -extern struct of_device *of_dev_get(struct of_device *dev); -extern void of_dev_put(struct of_device *dev); - -/* - * An of_platform_driver driver is attached to a basic of_device on - * the "platform bus" (of_platform_bus_type) - */ -struct of_platform_driver -{ - char *name; - struct of_device_id *match_table; - struct module *owner; - - int (*probe)(struct of_device* dev, const struct of_device_id *match); - int (*remove)(struct of_device* dev); - - int (*suspend)(struct of_device* dev, pm_message_t state); - int (*resume)(struct of_device* dev); - int (*shutdown)(struct of_device* dev); - - struct device_driver driver; -}; -#define to_of_platform_driver(drv) container_of(drv,struct of_platform_driver, driver) - -extern int of_register_driver(struct of_platform_driver *drv); -extern void of_unregister_driver(struct of_platform_driver *drv); -extern int of_device_register(struct of_device *ofdev); -extern void of_device_unregister(struct of_device *ofdev); -extern struct of_device *of_platform_device_create(struct device_node *np, - const char *bus_id, - struct device *parent); -extern void of_release_dev(struct device *dev); - -#endif /* __OF_DEVICE_H__ */ - diff --git a/include/asm-ppc/ohare.h b/include/asm-ppc/ohare.h deleted file mode 100644 index 023b5977223..00000000000 --- a/include/asm-ppc/ohare.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * ohare.h: definitions for using the "O'Hare" I/O controller chip. - * - * Copyright (C) 1997 Paul Mackerras. - * - * BenH: Changed to match those of heathrow (but not all of them). Please - * check if I didn't break anything (especially the media bay). - */ - -/* offset from ohare base for feature control register */ -#define OHARE_MBCR 0x34 -#define OHARE_FCR 0x38 - -/* - * Bits in feature control register. - * These were mostly derived by experiment on a powerbook 3400 - * and may differ for other machines. - */ -#define OH_SCC_RESET 1 -#define OH_BAY_POWER_N 2 /* a guess */ -#define OH_BAY_PCI_ENABLE 4 /* a guess */ -#define OH_BAY_IDE_ENABLE 8 -#define OH_BAY_FLOPPY_ENABLE 0x10 -#define OH_IDE0_ENABLE 0x20 -#define OH_IDE0_RESET_N 0x40 /* a guess */ -#define OH_BAY_DEV_MASK 0x1c -#define OH_BAY_RESET_N 0x80 -#define OH_IOBUS_ENABLE 0x100 /* IOBUS seems to be IDE */ -#define OH_SCC_ENABLE 0x200 -#define OH_MESH_ENABLE 0x400 -#define OH_FLOPPY_ENABLE 0x800 -#define OH_SCCA_IO 0x4000 -#define OH_SCCB_IO 0x8000 -#define OH_VIA_ENABLE 0x10000 /* Is apparently wrong, to be verified */ -#define OH_IDE1_RESET_N 0x800000 - -/* - * Bits to set in the feature control register on PowerBooks. - */ -#define PBOOK_FEATURES (OH_IDE_ENABLE | OH_SCC_ENABLE | \ - OH_MESH_ENABLE | OH_SCCA_IO | OH_SCCB_IO) - -/* - * A magic value to put into the feature control register of the - * "ohare" I/O controller on Starmaxes to enable the IDE CD interface. - * Contributed by Harry Eaton. - */ -#define STARMAX_FEATURES 0xbeff7a diff --git a/include/asm-ppc/open_pic.h b/include/asm-ppc/open_pic.h index 7848aa610c0..ec2f46629ca 100644 --- a/include/asm-ppc/open_pic.h +++ b/include/asm-ppc/open_pic.h @@ -58,8 +58,7 @@ extern int openpic_get_irq(struct pt_regs *regs); extern void openpic_reset_processor_phys(u_int cpumask); extern void openpic_setup_ISU(int isu_num, unsigned long addr); extern void openpic_cause_IPI(u_int ipi, cpumask_t cpumask); -extern void smp_openpic_message_pass(int target, int msg, unsigned long data, - int wait); +extern void smp_openpic_message_pass(int target, int msg); extern void openpic_set_k2_cascade(int irq); extern void openpic_set_priority(u_int pri); extern u_int openpic_get_priority(void); diff --git a/include/asm-ppc/page.h b/include/asm-ppc/page.h index 4789dc02424..fc44f7ca62d 100644 --- a/include/asm-ppc/page.h +++ b/include/asm-ppc/page.h @@ -34,6 +34,17 @@ typedef unsigned long pte_basic_t; #define PTE_FMT "%.8lx" #endif +/* align addr on a size boundary - adjust address up/down if needed */ +#define _ALIGN_UP(addr,size) (((addr)+((size)-1))&(~((size)-1))) +#define _ALIGN_DOWN(addr,size) ((addr)&(~((size)-1))) + +/* align addr on a size boundary - adjust address up if needed */ +#define _ALIGN(addr,size) _ALIGN_UP(addr,size) + +/* to align the pointer to the (next) page boundary */ +#define PAGE_ALIGN(addr) _ALIGN(addr, PAGE_SIZE) + + #undef STRICT_MM_TYPECHECKS #ifdef STRICT_MM_TYPECHECKS @@ -76,13 +87,6 @@ typedef unsigned long pgprot_t; #endif - -/* align addr on a size boundary - adjust address up if needed -- Cort */ -#define _ALIGN(addr,size) (((addr)+(size)-1)&(~((size)-1))) - -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) - struct page; extern void clear_pages(void *page, int order); static inline void clear_page(void *page) { clear_pages(page, 0); } diff --git a/include/asm-ppc/parport.h b/include/asm-ppc/parport.h deleted file mode 100644 index 11f96d3de5b..00000000000 --- a/include/asm-ppc/parport.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * parport.h: platform-specific PC-style parport initialisation - * - * Copyright (C) 1999, 2000 Tim Waugh <tim@cyberelk.demon.co.uk> - * - * This file should only be included by drivers/parport/parport_pc.c. - */ - -#ifndef _ASM_PPC_PARPORT_H -#define _ASM_PPC_PARPORT_H - -static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma); -static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma) -{ - return parport_pc_find_isa_ports (autoirq, autodma); -} - -#endif /* !(_ASM_PPC_PARPORT_H) */ diff --git a/include/asm-ppc/pci-bridge.h b/include/asm-ppc/pci-bridge.h index ffa423456c2..e58c78f90a5 100644 --- a/include/asm-ppc/pci-bridge.h +++ b/include/asm-ppc/pci-bridge.h @@ -79,6 +79,11 @@ struct pci_controller { struct resource mem_space; }; +static inline struct pci_controller *pci_bus_to_host(struct pci_bus *bus) +{ + return bus->sysdata; +} + /* These are used for config access before all the PCI probing has been done. */ int early_read_config_byte(struct pci_controller *hose, int bus, int dev_fn, diff --git a/include/asm-ppc/pci.h b/include/asm-ppc/pci.h index 9dd06cd4009..61434edbad7 100644 --- a/include/asm-ppc/pci.h +++ b/include/asm-ppc/pci.h @@ -24,9 +24,9 @@ struct pci_dev; * Set this to 1 if you want the kernel to re-assign all PCI * bus numbers */ -extern int pci_assign_all_busses; +extern int pci_assign_all_buses; -#define pcibios_assign_all_busses() (pci_assign_all_busses) +#define pcibios_assign_all_busses() (pci_assign_all_buses) #define pcibios_scan_all_fns(a, b) 0 #define PCIBIOS_MIN_IO 0x1000 @@ -126,7 +126,7 @@ extern void pcibios_add_platform_entries(struct pci_dev *dev); struct file; extern pgprot_t pci_phys_mem_access_prot(struct file *file, - unsigned long offset, + unsigned long pfn, unsigned long size, pgprot_t prot); diff --git a/include/asm-ppc/perfmon.h b/include/asm-ppc/perfmon.h deleted file mode 100644 index 5e7a89c47b5..00000000000 --- a/include/asm-ppc/perfmon.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef __PERFMON_H -#define __PERFMON_H - -extern void (*perf_irq)(struct pt_regs *); - -int request_perfmon_irq(void (*handler)(struct pt_regs *)); -void free_perfmon_irq(void); - -#ifdef CONFIG_FSL_BOOKE -void init_pmc_stop(int ctr); -void set_pmc_event(int ctr, int event); -void set_pmc_user_kernel(int ctr, int user, int kernel); -void set_pmc_marked(int ctr, int mark0, int mark1); -void pmc_start_ctr(int ctr, int enable); -void pmc_start_ctrs(int enable); -void pmc_stop_ctrs(void); -void dump_pmcs(void); - -extern struct op_ppc32_model op_model_fsl_booke; -#endif - -#endif /* __PERFMON_H */ diff --git a/include/asm-ppc/pgtable.h b/include/asm-ppc/pgtable.h index eee601bb9ad..b28a713ba86 100644 --- a/include/asm-ppc/pgtable.h +++ b/include/asm-ppc/pgtable.h @@ -705,7 +705,7 @@ static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty) #define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | _PAGE_NO_CACHE | _PAGE_GUARDED)) struct file; -extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long addr, +extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, unsigned long size, pgprot_t vma_prot); #define __HAVE_PHYS_MEM_ACCESS_PROT diff --git a/include/asm-ppc/pmac_feature.h b/include/asm-ppc/pmac_feature.h deleted file mode 100644 index e9683bcff19..00000000000 --- a/include/asm-ppc/pmac_feature.h +++ /dev/null @@ -1,380 +0,0 @@ -/* - * Definition of platform feature hooks for PowerMacs - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1998 Paul Mackerras & - * Ben. Herrenschmidt. - * - * - * Note: I removed media-bay details from the feature stuff, I believe it's - * not worth it, the media-bay driver can directly use the mac-io - * ASIC registers. - * - * Implementation note: Currently, none of these functions will block. - * However, they may internally protect themselves with a spinlock - * for way too long. Be prepared for at least some of these to block - * in the future. - * - * Unless specifically defined, the result code is assumed to be an - * error when negative, 0 is the default success result. Some functions - * may return additional positive result values. - * - * To keep implementation simple, all feature calls are assumed to have - * the prototype parameters (struct device_node* node, int value). - * When either is not used, pass 0. - */ - -#ifdef __KERNEL__ -#ifndef __PPC_ASM_PMAC_FEATURE_H -#define __PPC_ASM_PMAC_FEATURE_H - -#include <asm/macio.h> -#include <asm/machdep.h> - -/* - * Known Mac motherboard models - * - * Please, report any error here to benh@kernel.crashing.org, thanks ! - * - * Note that I don't fully maintain this list for Core99 & MacRISC2 - * and I'm considering removing all NewWorld entries from it and - * entirely rely on the model string. - */ - -/* PowerSurge are the first generation of PCI Pmacs. This include - * all of the Grand-Central based machines. We currently don't - * differenciate most of them. - */ -#define PMAC_TYPE_PSURGE 0x10 /* PowerSurge */ -#define PMAC_TYPE_ANS 0x11 /* Apple Network Server */ - -/* Here is the infamous serie of OHare based machines - */ -#define PMAC_TYPE_COMET 0x20 /* Beleived to be PowerBook 2400 */ -#define PMAC_TYPE_HOOPER 0x21 /* Beleived to be PowerBook 3400 */ -#define PMAC_TYPE_KANGA 0x22 /* PowerBook 3500 (first G3) */ -#define PMAC_TYPE_ALCHEMY 0x23 /* Alchemy motherboard base */ -#define PMAC_TYPE_GAZELLE 0x24 /* Spartacus, some 5xxx/6xxx */ -#define PMAC_TYPE_UNKNOWN_OHARE 0x2f /* Unknown, but OHare based */ - -/* Here are the Heathrow based machines - * FIXME: Differenciate wallstreet,mainstreet,wallstreetII - */ -#define PMAC_TYPE_GOSSAMER 0x30 /* Gossamer motherboard */ -#define PMAC_TYPE_SILK 0x31 /* Desktop PowerMac G3 */ -#define PMAC_TYPE_WALLSTREET 0x32 /* Wallstreet/Mainstreet PowerBook*/ -#define PMAC_TYPE_UNKNOWN_HEATHROW 0x3f /* Unknown but heathrow based */ - -/* Here are newworld machines based on Paddington (heathrow derivative) - */ -#define PMAC_TYPE_101_PBOOK 0x40 /* 101 PowerBook (aka Lombard) */ -#define PMAC_TYPE_ORIG_IMAC 0x41 /* First generation iMac */ -#define PMAC_TYPE_YOSEMITE 0x42 /* B&W G3 */ -#define PMAC_TYPE_YIKES 0x43 /* Yikes G4 (PCI graphics) */ -#define PMAC_TYPE_UNKNOWN_PADDINGTON 0x4f /* Unknown but paddington based */ - -/* Core99 machines based on UniNorth 1.0 and 1.5 - * - * Note: A single entry here may cover several actual models according - * to the device-tree. (Sawtooth is most tower G4s, FW_IMAC is most - * FireWire based iMacs, etc...). Those machines are too similar to be - * distinguished here, when they need to be differencied, use the - * device-tree "model" or "compatible" property. - */ -#define PMAC_TYPE_ORIG_IBOOK 0x40 /* First iBook model (no firewire) */ -#define PMAC_TYPE_SAWTOOTH 0x41 /* Desktop G4s */ -#define PMAC_TYPE_FW_IMAC 0x42 /* FireWire iMacs (except Pangea based) */ -#define PMAC_TYPE_FW_IBOOK 0x43 /* FireWire iBooks (except iBook2) */ -#define PMAC_TYPE_CUBE 0x44 /* Cube PowerMac */ -#define PMAC_TYPE_QUICKSILVER 0x45 /* QuickSilver G4s */ -#define PMAC_TYPE_PISMO 0x46 /* Pismo PowerBook */ -#define PMAC_TYPE_TITANIUM 0x47 /* Titanium PowerBook */ -#define PMAC_TYPE_TITANIUM2 0x48 /* Titanium II PowerBook (no L3, M6) */ -#define PMAC_TYPE_TITANIUM3 0x49 /* Titanium III PowerBook (with L3 & M7) */ -#define PMAC_TYPE_TITANIUM4 0x50 /* Titanium IV PowerBook (with L3 & M9) */ -#define PMAC_TYPE_EMAC 0x50 /* eMac */ -#define PMAC_TYPE_UNKNOWN_CORE99 0x5f - -/* MacRisc2 with UniNorth 2.0 */ -#define PMAC_TYPE_RACKMAC 0x80 /* XServe */ -#define PMAC_TYPE_WINDTUNNEL 0x81 - -/* MacRISC2 machines based on the Pangea chipset - */ -#define PMAC_TYPE_PANGEA_IMAC 0x100 /* Flower Power iMac */ -#define PMAC_TYPE_IBOOK2 0x101 /* iBook2 (polycarbonate) */ -#define PMAC_TYPE_FLAT_PANEL_IMAC 0x102 /* Flat panel iMac */ -#define PMAC_TYPE_UNKNOWN_PANGEA 0x10f - -/* MacRISC2 machines based on the Intrepid chipset - */ -#define PMAC_TYPE_UNKNOWN_INTREPID 0x11f /* Generic */ - -/* MacRISC4 / G5 machines. We don't have per-machine selection here anymore, - * but rather machine families - */ -#define PMAC_TYPE_POWERMAC_G5 0x150 /* U3 & U3H based */ -#define PMAC_TYPE_POWERMAC_G5_U3L 0x151 /* U3L based desktop */ -#define PMAC_TYPE_IMAC_G5 0x152 /* iMac G5 */ -#define PMAC_TYPE_XSERVE_G5 0x153 /* Xserve G5 */ -#define PMAC_TYPE_UNKNOWN_K2 0x19f /* Any other K2 based */ - -/* - * Motherboard flags - */ - -#define PMAC_MB_CAN_SLEEP 0x00000001 -#define PMAC_MB_HAS_FW_POWER 0x00000002 -#define PMAC_MB_OLD_CORE99 0x00000004 -#define PMAC_MB_MOBILE 0x00000008 -#define PMAC_MB_MAY_SLEEP 0x00000010 - -/* - * Feature calls supported on pmac - * - */ - -/* - * Use this inline wrapper - */ -struct device_node; - -static inline long pmac_call_feature(int selector, struct device_node* node, - long param, long value) -{ - if (!ppc_md.feature_call) - return -ENODEV; - return ppc_md.feature_call(selector, node, param, value); -} - -/* PMAC_FTR_SERIAL_ENABLE (struct device_node* node, int param, int value) - * enable/disable an SCC side. Pass the node corresponding to the - * channel side as a parameter. - * param is the type of port - * if param is ored with PMAC_SCC_FLAG_XMON, then the SCC is locked enabled - * for use by xmon. - */ -#define PMAC_FTR_SCC_ENABLE PMAC_FTR_DEF(0) - #define PMAC_SCC_ASYNC 0 - #define PMAC_SCC_IRDA 1 - #define PMAC_SCC_I2S1 2 - #define PMAC_SCC_FLAG_XMON 0x00001000 - -/* PMAC_FTR_MODEM_ENABLE (struct device_node* node, 0, int value) - * enable/disable the internal modem. - */ -#define PMAC_FTR_MODEM_ENABLE PMAC_FTR_DEF(1) - -/* PMAC_FTR_SWIM3_ENABLE (struct device_node* node, 0,int value) - * enable/disable the swim3 (floppy) cell of a mac-io ASIC - */ -#define PMAC_FTR_SWIM3_ENABLE PMAC_FTR_DEF(2) - -/* PMAC_FTR_MESH_ENABLE (struct device_node* node, 0, int value) - * enable/disable the mesh (scsi) cell of a mac-io ASIC - */ -#define PMAC_FTR_MESH_ENABLE PMAC_FTR_DEF(3) - -/* PMAC_FTR_IDE_ENABLE (struct device_node* node, int busID, int value) - * enable/disable an IDE port of a mac-io ASIC - * pass the busID parameter - */ -#define PMAC_FTR_IDE_ENABLE PMAC_FTR_DEF(4) - -/* PMAC_FTR_IDE_RESET (struct device_node* node, int busID, int value) - * assert(1)/release(0) an IDE reset line (mac-io IDE only) - */ -#define PMAC_FTR_IDE_RESET PMAC_FTR_DEF(5) - -/* PMAC_FTR_BMAC_ENABLE (struct device_node* node, 0, int value) - * enable/disable the bmac (ethernet) cell of a mac-io ASIC, also drive - * it's reset line - */ -#define PMAC_FTR_BMAC_ENABLE PMAC_FTR_DEF(6) - -/* PMAC_FTR_GMAC_ENABLE (struct device_node* node, 0, int value) - * enable/disable the gmac (ethernet) cell of an uninorth ASIC. This - * control the cell's clock. - */ -#define PMAC_FTR_GMAC_ENABLE PMAC_FTR_DEF(7) - -/* PMAC_FTR_GMAC_PHY_RESET (struct device_node* node, 0, 0) - * Perform a HW reset of the PHY connected to a gmac controller. - * Pass the gmac device node, not the PHY node. - */ -#define PMAC_FTR_GMAC_PHY_RESET PMAC_FTR_DEF(8) - -/* PMAC_FTR_SOUND_CHIP_ENABLE (struct device_node* node, 0, int value) - * enable/disable the sound chip, whatever it is and provided it can - * acually be controlled - */ -#define PMAC_FTR_SOUND_CHIP_ENABLE PMAC_FTR_DEF(9) - -/* -- add various tweaks related to sound routing -- */ - -/* PMAC_FTR_AIRPORT_ENABLE (struct device_node* node, 0, int value) - * enable/disable the airport card - */ -#define PMAC_FTR_AIRPORT_ENABLE PMAC_FTR_DEF(10) - -/* PMAC_FTR_RESET_CPU (NULL, int cpu_nr, 0) - * toggle the reset line of a CPU on an uninorth-based SMP machine - */ -#define PMAC_FTR_RESET_CPU PMAC_FTR_DEF(11) - -/* PMAC_FTR_USB_ENABLE (struct device_node* node, 0, int value) - * enable/disable an USB cell, along with the power of the USB "pad" - * on keylargo based machines - */ -#define PMAC_FTR_USB_ENABLE PMAC_FTR_DEF(12) - -/* PMAC_FTR_1394_ENABLE (struct device_node* node, 0, int value) - * enable/disable the firewire cell of an uninorth ASIC. - */ -#define PMAC_FTR_1394_ENABLE PMAC_FTR_DEF(13) - -/* PMAC_FTR_1394_CABLE_POWER (struct device_node* node, 0, int value) - * enable/disable the firewire cable power supply of the uninorth - * firewire cell - */ -#define PMAC_FTR_1394_CABLE_POWER PMAC_FTR_DEF(14) - -/* PMAC_FTR_SLEEP_STATE (struct device_node* node, 0, int value) - * set the sleep state of the motherboard. - * - * Pass -1 as value to query for sleep capability - * Pass 1 to set IOs to sleep - * Pass 0 to set IOs to wake - */ -#define PMAC_FTR_SLEEP_STATE PMAC_FTR_DEF(15) - -/* PMAC_FTR_GET_MB_INFO (NULL, selector, 0) - * - * returns some motherboard infos. - * selector: 0 - model id - * 1 - model flags (capabilities) - * 2 - model name (cast to const char *) - */ -#define PMAC_FTR_GET_MB_INFO PMAC_FTR_DEF(16) -#define PMAC_MB_INFO_MODEL 0 -#define PMAC_MB_INFO_FLAGS 1 -#define PMAC_MB_INFO_NAME 2 - -/* PMAC_FTR_READ_GPIO (NULL, int index, 0) - * - * read a GPIO from a mac-io controller of type KeyLargo or Pangea. - * the value returned is a byte (positive), or a negative error code - */ -#define PMAC_FTR_READ_GPIO PMAC_FTR_DEF(17) - -/* PMAC_FTR_WRITE_GPIO (NULL, int index, int value) - * - * write a GPIO of a mac-io controller of type KeyLargo or Pangea. - */ -#define PMAC_FTR_WRITE_GPIO PMAC_FTR_DEF(18) - -/* PMAC_FTR_ENABLE_MPIC - * - * Enable the MPIC cell - */ -#define PMAC_FTR_ENABLE_MPIC PMAC_FTR_DEF(19) - -/* PMAC_FTR_AACK_DELAY_ENABLE (NULL, int enable, 0) - * - * Enable/disable the AACK delay on the northbridge for systems using DFS - */ -#define PMAC_FTR_AACK_DELAY_ENABLE PMAC_FTR_DEF(20) - -/* PMAC_FTR_DEVICE_CAN_WAKE - * - * Used by video drivers to inform system that they can actually perform - * wakeup from sleep - */ -#define PMAC_FTR_DEVICE_CAN_WAKE PMAC_FTR_DEF(22) - - -/* Don't use those directly, they are for the sake of pmac_setup.c */ -extern long pmac_do_feature_call(unsigned int selector, ...); -extern void pmac_feature_init(void); - -/* Video suspend tweak */ -extern void pmac_set_early_video_resume(void (*proc)(void *data), void *data); -extern void pmac_call_early_video_resume(void); - -#define PMAC_FTR_DEF(x) ((_MACH_Pmac << 16) | (x)) - -/* The AGP driver registers itself here */ -extern void pmac_register_agp_pm(struct pci_dev *bridge, - int (*suspend)(struct pci_dev *bridge), - int (*resume)(struct pci_dev *bridge)); - -/* Those are meant to be used by video drivers to deal with AGP - * suspend resume properly - */ -extern void pmac_suspend_agp_for_card(struct pci_dev *dev); -extern void pmac_resume_agp_for_card(struct pci_dev *dev); - -/* Used by the via-pmu driver for suspend/resume - */ -extern void pmac_tweak_clock_spreading(int enable); - -/* - * The part below is for use by macio_asic.c only, do not rely - * on the data structures or constants below in a normal driver - * - */ - -#define MAX_MACIO_CHIPS 2 - -enum { - macio_unknown = 0, - macio_grand_central, - macio_ohare, - macio_ohareII, - macio_heathrow, - macio_gatwick, - macio_paddington, - macio_keylargo, - macio_pangea, - macio_intrepid, - macio_keylargo2, -}; - -struct macio_chip -{ - struct device_node *of_node; - int type; - const char *name; - int rev; - volatile u32 __iomem *base; - unsigned long flags; - - /* For use by macio_asic PCI driver */ - struct macio_bus lbus; -}; - -extern struct macio_chip macio_chips[MAX_MACIO_CHIPS]; - -#define MACIO_FLAG_SCCA_ON 0x00000001 -#define MACIO_FLAG_SCCB_ON 0x00000002 -#define MACIO_FLAG_SCC_LOCKED 0x00000004 -#define MACIO_FLAG_AIRPORT_ON 0x00000010 -#define MACIO_FLAG_FW_SUPPORTED 0x00000020 - -extern struct macio_chip* macio_find(struct device_node* child, int type); - -#define MACIO_FCR32(macio, r) ((macio)->base + ((r) >> 2)) -#define MACIO_FCR8(macio, r) (((volatile u8 __iomem *)((macio)->base)) + (r)) - -#define MACIO_IN32(r) (in_le32(MACIO_FCR32(macio,r))) -#define MACIO_OUT32(r,v) (out_le32(MACIO_FCR32(macio,r), (v))) -#define MACIO_BIS(r,v) (MACIO_OUT32((r), MACIO_IN32(r) | (v))) -#define MACIO_BIC(r,v) (MACIO_OUT32((r), MACIO_IN32(r) & ~(v))) -#define MACIO_IN8(r) (in_8(MACIO_FCR8(macio,r))) -#define MACIO_OUT8(r,v) (out_8(MACIO_FCR8(macio,r), (v))) - -#endif /* __PPC_ASM_PMAC_FEATURE_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/pmac_low_i2c.h b/include/asm-ppc/pmac_low_i2c.h deleted file mode 100644 index 809a5963d5e..00000000000 --- a/include/asm-ppc/pmac_low_i2c.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * include/asm-ppc/pmac_low_i2c.h - * - * Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ -#ifndef __PMAC_LOW_I2C_H__ -#define __PMAC_LOW_I2C_H__ - -/* i2c mode (based on the platform functions format) */ -enum { - pmac_low_i2c_mode_dumb = 1, - pmac_low_i2c_mode_std = 2, - pmac_low_i2c_mode_stdsub = 3, - pmac_low_i2c_mode_combined = 4, -}; - -/* RW bit in address */ -enum { - pmac_low_i2c_read = 0x01, - pmac_low_i2c_write = 0x00 -}; - -/* Init, called early during boot */ -extern void pmac_init_low_i2c(void); - -/* Locking functions exposed to i2c-keywest */ -int pmac_low_i2c_lock(struct device_node *np); -int pmac_low_i2c_unlock(struct device_node *np); - -/* Access functions for platform code */ -int pmac_low_i2c_open(struct device_node *np, int channel); -int pmac_low_i2c_close(struct device_node *np); -int pmac_low_i2c_setmode(struct device_node *np, int mode); -int pmac_low_i2c_xfer(struct device_node *np, u8 addrdir, u8 subaddr, u8 *data, int len); - - -#endif /* __PMAC_LOW_I2C_H__ */ diff --git a/include/asm-ppc/posix_types.h b/include/asm-ppc/posix_types.h deleted file mode 100644 index a14a82abe8d..00000000000 --- a/include/asm-ppc/posix_types.h +++ /dev/null @@ -1,111 +0,0 @@ -#ifndef _PPC_POSIX_TYPES_H -#define _PPC_POSIX_TYPES_H - -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned long __kernel_ino_t; -typedef unsigned int __kernel_mode_t; -typedef unsigned short __kernel_nlink_t; -typedef long __kernel_off_t; -typedef int __kernel_pid_t; -typedef unsigned int __kernel_uid_t; -typedef unsigned int __kernel_gid_t; -typedef unsigned int __kernel_size_t; -typedef int __kernel_ssize_t; -typedef long __kernel_ptrdiff_t; -typedef long __kernel_time_t; -typedef long __kernel_suseconds_t; -typedef long __kernel_clock_t; -typedef int __kernel_timer_t; -typedef int __kernel_clockid_t; -typedef int __kernel_daddr_t; -typedef char * __kernel_caddr_t; -typedef short __kernel_ipc_pid_t; -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; -typedef unsigned int __kernel_uid32_t; -typedef unsigned int __kernel_gid32_t; - -typedef unsigned int __kernel_old_uid_t; -typedef unsigned int __kernel_old_gid_t; -typedef unsigned int __kernel_old_dev_t; - -#ifdef __GNUC__ -typedef long long __kernel_loff_t; -#endif - -typedef struct { - int val[2]; -} __kernel_fsid_t; - -#ifndef __GNUC__ - -#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d)) -#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) -#define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) -#define __FD_ZERO(set) \ - ((void) memset ((__ptr_t) (set), 0, sizeof (__kernel_fd_set))) - -#else /* __GNUC__ */ - -#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) \ - || (__GLIBC__ == 2 && __GLIBC_MINOR__ == 0) -/* With GNU C, use inline functions instead so args are evaluated only once: */ - -#undef __FD_SET -static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp) -{ - unsigned long _tmp = fd / __NFDBITS; - unsigned long _rem = fd % __NFDBITS; - fdsetp->fds_bits[_tmp] |= (1UL<<_rem); -} - -#undef __FD_CLR -static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp) -{ - unsigned long _tmp = fd / __NFDBITS; - unsigned long _rem = fd % __NFDBITS; - fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem); -} - -#undef __FD_ISSET -static __inline__ int __FD_ISSET(unsigned long fd, __kernel_fd_set *p) -{ - unsigned long _tmp = fd / __NFDBITS; - unsigned long _rem = fd % __NFDBITS; - return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0; -} - -/* - * This will unroll the loop for the normal constant case (8 ints, - * for a 256-bit fd_set) - */ -#undef __FD_ZERO -static __inline__ void __FD_ZERO(__kernel_fd_set *p) -{ - unsigned int *tmp = (unsigned int *)p->fds_bits; - int i; - - if (__builtin_constant_p(__FDSET_LONGS)) { - switch (__FDSET_LONGS) { - case 8: - tmp[0] = 0; tmp[1] = 0; tmp[2] = 0; tmp[3] = 0; - tmp[4] = 0; tmp[5] = 0; tmp[6] = 0; tmp[7] = 0; - return; - } - } - i = __FDSET_LONGS; - while (i) { - i--; - *tmp = 0; - tmp++; - } -} - -#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ -#endif /* __GNUC__ */ -#endif /* _PPC_POSIX_TYPES_H */ diff --git a/include/asm-ppc/ppc_asm.h b/include/asm-ppc/ppc_asm.h deleted file mode 100644 index bb53e2def36..00000000000 --- a/include/asm-ppc/ppc_asm.h +++ /dev/null @@ -1,350 +0,0 @@ -/* - * include/asm-ppc/ppc_asm.h - * - * Definitions used by various bits of low-level assembly code on PowerPC. - * - * Copyright (C) 1995-1999 Gary Thomas, Paul Mackerras, Cort Dougan. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/config.h> - -/* - * Macros for storing registers into and loading registers from - * exception frames. - */ -#define SAVE_GPR(n, base) stw n,GPR0+4*(n)(base) -#define SAVE_2GPRS(n, base) SAVE_GPR(n, base); SAVE_GPR(n+1, base) -#define SAVE_4GPRS(n, base) SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base) -#define SAVE_8GPRS(n, base) SAVE_4GPRS(n, base); SAVE_4GPRS(n+4, base) -#define SAVE_10GPRS(n, base) SAVE_8GPRS(n, base); SAVE_2GPRS(n+8, base) -#define REST_GPR(n, base) lwz n,GPR0+4*(n)(base) -#define REST_2GPRS(n, base) REST_GPR(n, base); REST_GPR(n+1, base) -#define REST_4GPRS(n, base) REST_2GPRS(n, base); REST_2GPRS(n+2, base) -#define REST_8GPRS(n, base) REST_4GPRS(n, base); REST_4GPRS(n+4, base) -#define REST_10GPRS(n, base) REST_8GPRS(n, base); REST_2GPRS(n+8, base) - -#define SAVE_NVGPRS(base) SAVE_GPR(13, base); SAVE_8GPRS(14, base); \ - SAVE_10GPRS(22, base) -#define REST_NVGPRS(base) REST_GPR(13, base); REST_8GPRS(14, base); \ - REST_10GPRS(22, base) - -#define SAVE_FPR(n, base) stfd n,THREAD_FPR0+8*(n)(base) -#define SAVE_2FPRS(n, base) SAVE_FPR(n, base); SAVE_FPR(n+1, base) -#define SAVE_4FPRS(n, base) SAVE_2FPRS(n, base); SAVE_2FPRS(n+2, base) -#define SAVE_8FPRS(n, base) SAVE_4FPRS(n, base); SAVE_4FPRS(n+4, base) -#define SAVE_16FPRS(n, base) SAVE_8FPRS(n, base); SAVE_8FPRS(n+8, base) -#define SAVE_32FPRS(n, base) SAVE_16FPRS(n, base); SAVE_16FPRS(n+16, base) -#define REST_FPR(n, base) lfd n,THREAD_FPR0+8*(n)(base) -#define REST_2FPRS(n, base) REST_FPR(n, base); REST_FPR(n+1, base) -#define REST_4FPRS(n, base) REST_2FPRS(n, base); REST_2FPRS(n+2, base) -#define REST_8FPRS(n, base) REST_4FPRS(n, base); REST_4FPRS(n+4, base) -#define REST_16FPRS(n, base) REST_8FPRS(n, base); REST_8FPRS(n+8, base) -#define REST_32FPRS(n, base) REST_16FPRS(n, base); REST_16FPRS(n+16, base) - -#define SAVE_VR(n,b,base) li b,THREAD_VR0+(16*(n)); stvx n,b,base -#define SAVE_2VR(n,b,base) SAVE_VR(n,b,base); SAVE_VR(n+1,b,base) -#define SAVE_4VR(n,b,base) SAVE_2VR(n,b,base); SAVE_2VR(n+2,b,base) -#define SAVE_8VR(n,b,base) SAVE_4VR(n,b,base); SAVE_4VR(n+4,b,base) -#define SAVE_16VR(n,b,base) SAVE_8VR(n,b,base); SAVE_8VR(n+8,b,base) -#define SAVE_32VR(n,b,base) SAVE_16VR(n,b,base); SAVE_16VR(n+16,b,base) -#define REST_VR(n,b,base) li b,THREAD_VR0+(16*(n)); lvx n,b,base -#define REST_2VR(n,b,base) REST_VR(n,b,base); REST_VR(n+1,b,base) -#define REST_4VR(n,b,base) REST_2VR(n,b,base); REST_2VR(n+2,b,base) -#define REST_8VR(n,b,base) REST_4VR(n,b,base); REST_4VR(n+4,b,base) -#define REST_16VR(n,b,base) REST_8VR(n,b,base); REST_8VR(n+8,b,base) -#define REST_32VR(n,b,base) REST_16VR(n,b,base); REST_16VR(n+16,b,base) - -#define SAVE_EVR(n,s,base) evmergehi s,s,n; stw s,THREAD_EVR0+4*(n)(base) -#define SAVE_2EVR(n,s,base) SAVE_EVR(n,s,base); SAVE_EVR(n+1,s,base) -#define SAVE_4EVR(n,s,base) SAVE_2EVR(n,s,base); SAVE_2EVR(n+2,s,base) -#define SAVE_8EVR(n,s,base) SAVE_4EVR(n,s,base); SAVE_4EVR(n+4,s,base) -#define SAVE_16EVR(n,s,base) SAVE_8EVR(n,s,base); SAVE_8EVR(n+8,s,base) -#define SAVE_32EVR(n,s,base) SAVE_16EVR(n,s,base); SAVE_16EVR(n+16,s,base) - -#define REST_EVR(n,s,base) lwz s,THREAD_EVR0+4*(n)(base); evmergelo n,s,n -#define REST_2EVR(n,s,base) REST_EVR(n,s,base); REST_EVR(n+1,s,base) -#define REST_4EVR(n,s,base) REST_2EVR(n,s,base); REST_2EVR(n+2,s,base) -#define REST_8EVR(n,s,base) REST_4EVR(n,s,base); REST_4EVR(n+4,s,base) -#define REST_16EVR(n,s,base) REST_8EVR(n,s,base); REST_8EVR(n+8,s,base) -#define REST_32EVR(n,s,base) REST_16EVR(n,s,base); REST_16EVR(n+16,s,base) - -#ifdef CONFIG_PPC601_SYNC_FIX -#define SYNC \ -BEGIN_FTR_SECTION \ - sync; \ - isync; \ -END_FTR_SECTION_IFSET(CPU_FTR_601) -#define SYNC_601 \ -BEGIN_FTR_SECTION \ - sync; \ -END_FTR_SECTION_IFSET(CPU_FTR_601) -#define ISYNC_601 \ -BEGIN_FTR_SECTION \ - isync; \ -END_FTR_SECTION_IFSET(CPU_FTR_601) -#else -#define SYNC -#define SYNC_601 -#define ISYNC_601 -#endif - -#ifndef CONFIG_SMP -#define TLBSYNC -#else /* CONFIG_SMP */ -/* tlbsync is not implemented on 601 */ -#define TLBSYNC \ -BEGIN_FTR_SECTION \ - tlbsync; \ - sync; \ -END_FTR_SECTION_IFCLR(CPU_FTR_601) -#endif - -/* - * This instruction is not implemented on the PPC 603 or 601; however, on - * the 403GCX and 405GP tlbia IS defined and tlbie is not. - * All of these instructions exist in the 8xx, they have magical powers, - * and they must be used. - */ - -#if !defined(CONFIG_4xx) && !defined(CONFIG_8xx) -#define tlbia \ - li r4,1024; \ - mtctr r4; \ - lis r4,KERNELBASE@h; \ -0: tlbie r4; \ - addi r4,r4,0x1000; \ - bdnz 0b -#endif - -#ifdef CONFIG_BOOKE -#define tophys(rd,rs) \ - addis rd,rs,0 - -#define tovirt(rd,rs) \ - addis rd,rs,0 - -#else /* CONFIG_BOOKE */ -/* - * On APUS (Amiga PowerPC cpu upgrade board), we don't know the - * physical base address of RAM at compile time. - */ -#define tophys(rd,rs) \ -0: addis rd,rs,-KERNELBASE@h; \ - .section ".vtop_fixup","aw"; \ - .align 1; \ - .long 0b; \ - .previous - -#define tovirt(rd,rs) \ -0: addis rd,rs,KERNELBASE@h; \ - .section ".ptov_fixup","aw"; \ - .align 1; \ - .long 0b; \ - .previous -#endif /* CONFIG_BOOKE */ - -/* - * On 64-bit cpus, we use the rfid instruction instead of rfi, but - * we then have to make sure we preserve the top 32 bits except for - * the 64-bit mode bit, which we clear. - */ -#ifdef CONFIG_PPC64BRIDGE -#define FIX_SRR1(ra, rb) \ - mr rb,ra; \ - mfmsr ra; \ - clrldi ra,ra,1; /* turn off 64-bit mode */ \ - rldimi ra,rb,0,32 -#define RFI .long 0x4c000024 /* rfid instruction */ -#define MTMSRD(r) .long (0x7c000164 + ((r) << 21)) /* mtmsrd */ -#define CLR_TOP32(r) rlwinm (r),(r),0,0,31 /* clear top 32 bits */ - -#else -#define FIX_SRR1(ra, rb) -#ifndef CONFIG_40x -#define RFI rfi -#else -#define RFI rfi; b . /* Prevent prefetch past rfi */ -#endif -#define MTMSRD(r) mtmsr r -#define CLR_TOP32(r) -#endif /* CONFIG_PPC64BRIDGE */ - -#define RFCI .long 0x4c000066 /* rfci instruction */ -#define RFDI .long 0x4c00004e /* rfdi instruction */ -#define RFMCI .long 0x4c00004c /* rfmci instruction */ - -#ifdef CONFIG_IBM405_ERR77 -#define PPC405_ERR77(ra,rb) dcbt ra, rb; -#define PPC405_ERR77_SYNC sync; -#else -#define PPC405_ERR77(ra,rb) -#define PPC405_ERR77_SYNC -#endif - -#ifdef CONFIG_IBM440EP_ERR42 -#define PPC440EP_ERR42 isync -#else -#define PPC440EP_ERR42 -#endif - -/* The boring bits... */ - -/* Condition Register Bit Fields */ - -#define cr0 0 -#define cr1 1 -#define cr2 2 -#define cr3 3 -#define cr4 4 -#define cr5 5 -#define cr6 6 -#define cr7 7 - - -/* General Purpose Registers (GPRs) */ - -#define r0 0 -#define r1 1 -#define r2 2 -#define r3 3 -#define r4 4 -#define r5 5 -#define r6 6 -#define r7 7 -#define r8 8 -#define r9 9 -#define r10 10 -#define r11 11 -#define r12 12 -#define r13 13 -#define r14 14 -#define r15 15 -#define r16 16 -#define r17 17 -#define r18 18 -#define r19 19 -#define r20 20 -#define r21 21 -#define r22 22 -#define r23 23 -#define r24 24 -#define r25 25 -#define r26 26 -#define r27 27 -#define r28 28 -#define r29 29 -#define r30 30 -#define r31 31 - - -/* Floating Point Registers (FPRs) */ - -#define fr0 0 -#define fr1 1 -#define fr2 2 -#define fr3 3 -#define fr4 4 -#define fr5 5 -#define fr6 6 -#define fr7 7 -#define fr8 8 -#define fr9 9 -#define fr10 10 -#define fr11 11 -#define fr12 12 -#define fr13 13 -#define fr14 14 -#define fr15 15 -#define fr16 16 -#define fr17 17 -#define fr18 18 -#define fr19 19 -#define fr20 20 -#define fr21 21 -#define fr22 22 -#define fr23 23 -#define fr24 24 -#define fr25 25 -#define fr26 26 -#define fr27 27 -#define fr28 28 -#define fr29 29 -#define fr30 30 -#define fr31 31 - -#define vr0 0 -#define vr1 1 -#define vr2 2 -#define vr3 3 -#define vr4 4 -#define vr5 5 -#define vr6 6 -#define vr7 7 -#define vr8 8 -#define vr9 9 -#define vr10 10 -#define vr11 11 -#define vr12 12 -#define vr13 13 -#define vr14 14 -#define vr15 15 -#define vr16 16 -#define vr17 17 -#define vr18 18 -#define vr19 19 -#define vr20 20 -#define vr21 21 -#define vr22 22 -#define vr23 23 -#define vr24 24 -#define vr25 25 -#define vr26 26 -#define vr27 27 -#define vr28 28 -#define vr29 29 -#define vr30 30 -#define vr31 31 - -#define evr0 0 -#define evr1 1 -#define evr2 2 -#define evr3 3 -#define evr4 4 -#define evr5 5 -#define evr6 6 -#define evr7 7 -#define evr8 8 -#define evr9 9 -#define evr10 10 -#define evr11 11 -#define evr12 12 -#define evr13 13 -#define evr14 14 -#define evr15 15 -#define evr16 16 -#define evr17 17 -#define evr18 18 -#define evr19 19 -#define evr20 20 -#define evr21 21 -#define evr22 22 -#define evr23 23 -#define evr24 24 -#define evr25 25 -#define evr26 26 -#define evr27 27 -#define evr28 28 -#define evr29 29 -#define evr30 30 -#define evr31 31 - -/* some stab codes */ -#define N_FUN 36 -#define N_RSYM 64 -#define N_SLINE 68 -#define N_SO 100 diff --git a/include/asm-ppc/ppc_sys.h b/include/asm-ppc/ppc_sys.h index 549f44843c5..bba5305c29e 100644 --- a/include/asm-ppc/ppc_sys.h +++ b/include/asm-ppc/ppc_sys.h @@ -18,7 +18,7 @@ #define __ASM_PPC_SYS_H #include <linux/init.h> -#include <linux/device.h> +#include <linux/platform_device.h> #include <linux/types.h> #if defined(CONFIG_8260) diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h deleted file mode 100644 index b05b5d9cae2..00000000000 --- a/include/asm-ppc/processor.h +++ /dev/null @@ -1,201 +0,0 @@ -#ifdef __KERNEL__ -#ifndef __ASM_PPC_PROCESSOR_H -#define __ASM_PPC_PROCESSOR_H - -/* - * Default implementation of macro that returns current - * instruction pointer ("program counter"). - */ -#define current_text_addr() ({ __label__ _l; _l: &&_l;}) - -#include <linux/config.h> -#include <linux/stringify.h> - -#include <asm/ptrace.h> -#include <asm/types.h> -#include <asm/mpc8xx.h> -#include <asm/reg.h> - -/* We only need to define a new _MACH_xxx for machines which are part of - * a configuration which supports more than one type of different machine. - * This is currently limited to CONFIG_PPC_MULTIPLATFORM and CHRP/PReP/PMac. - * -- Tom - */ -#define _MACH_prep 0x00000001 -#define _MACH_Pmac 0x00000002 /* pmac or pmac clone (non-chrp) */ -#define _MACH_chrp 0x00000004 /* chrp machine */ - -/* see residual.h for these */ -#define _PREP_Motorola 0x01 /* motorola prep */ -#define _PREP_Firm 0x02 /* firmworks prep */ -#define _PREP_IBM 0x00 /* ibm prep */ -#define _PREP_Bull 0x03 /* bull prep */ - -/* these are arbitrary */ -#define _CHRP_Motorola 0x04 /* motorola chrp, the cobra */ -#define _CHRP_IBM 0x05 /* IBM chrp, the longtrail and longtrail 2 */ -#define _CHRP_Pegasos 0x06 /* Genesi/bplan's Pegasos and Pegasos2 */ - -#define _GLOBAL(n)\ - .stabs __stringify(n:F-1),N_FUN,0,0,n;\ - .globl n;\ -n: - -/* - * this is the minimum allowable io space due to the location - * of the io areas on prep (first one at 0x80000000) but - * as soon as I get around to remapping the io areas with the BATs - * to match the mac we can raise this. -- Cort - */ -#define TASK_SIZE (CONFIG_TASK_SIZE) - -#ifndef __ASSEMBLY__ -#ifdef CONFIG_PPC_MULTIPLATFORM -extern int _machine; - -/* what kind of prep workstation we are */ -extern int _prep_type; -extern int _chrp_type; - -/* - * This is used to identify the board type from a given PReP board - * vendor. Board revision is also made available. - */ -extern unsigned char ucSystemType; -extern unsigned char ucBoardRev; -extern unsigned char ucBoardRevMaj, ucBoardRevMin; -#else -#define _machine 0 -#endif /* CONFIG_PPC_MULTIPLATFORM */ - -struct task_struct; -void start_thread(struct pt_regs *regs, unsigned long nip, unsigned long sp); -void release_thread(struct task_struct *); - -/* Prepare to copy thread state - unlazy all lazy status */ -extern void prepare_to_copy(struct task_struct *tsk); - -/* - * Create a new kernel thread. - */ -extern long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); - -/* Lazy FPU handling on uni-processor */ -extern struct task_struct *last_task_used_math; -extern struct task_struct *last_task_used_altivec; -extern struct task_struct *last_task_used_spe; - -/* This decides where the kernel will search for a free chunk of vm - * space during mmap's. - */ -#define TASK_UNMAPPED_BASE (TASK_SIZE / 8 * 3) - -typedef struct { - unsigned long seg; -} mm_segment_t; - -struct thread_struct { - unsigned long ksp; /* Kernel stack pointer */ - struct pt_regs *regs; /* Pointer to saved register state */ - mm_segment_t fs; /* for get_fs() validation */ - void *pgdir; /* root of page-table tree */ - int fpexc_mode; /* floating-point exception mode */ - signed long last_syscall; -#if defined(CONFIG_4xx) || defined (CONFIG_BOOKE) - unsigned long dbcr0; /* debug control register values */ - unsigned long dbcr1; -#endif - double fpr[32]; /* Complete floating point set */ - unsigned long fpscr_pad; /* fpr ... fpscr must be contiguous */ - unsigned long fpscr; /* Floating point status */ -#ifdef CONFIG_ALTIVEC - /* Complete AltiVec register set */ - vector128 vr[32] __attribute((aligned(16))); - /* AltiVec status */ - vector128 vscr __attribute((aligned(16))); - unsigned long vrsave; - int used_vr; /* set if process has used altivec */ -#endif /* CONFIG_ALTIVEC */ -#ifdef CONFIG_SPE - unsigned long evr[32]; /* upper 32-bits of SPE regs */ - u64 acc; /* Accumulator */ - unsigned long spefscr; /* SPE & eFP status */ - int used_spe; /* set if process has used spe */ -#endif /* CONFIG_SPE */ -}; - -#define ARCH_MIN_TASKALIGN 16 - -#define INIT_SP (sizeof(init_stack) + (unsigned long) &init_stack) - -#define INIT_THREAD { \ - .ksp = INIT_SP, \ - .fs = KERNEL_DS, \ - .pgdir = swapper_pg_dir, \ - .fpexc_mode = MSR_FE0 | MSR_FE1, \ -} - -/* - * Return saved PC of a blocked thread. For now, this is the "user" PC - */ -#define thread_saved_pc(tsk) \ - ((tsk)->thread.regs? (tsk)->thread.regs->nip: 0) - -unsigned long get_wchan(struct task_struct *p); - -#define KSTK_EIP(tsk) ((tsk)->thread.regs? (tsk)->thread.regs->nip: 0) -#define KSTK_ESP(tsk) ((tsk)->thread.regs? (tsk)->thread.regs->gpr[1]: 0) - -/* Get/set floating-point exception mode */ -#define GET_FPEXC_CTL(tsk, adr) get_fpexc_mode((tsk), (adr)) -#define SET_FPEXC_CTL(tsk, val) set_fpexc_mode((tsk), (val)) - -extern int get_fpexc_mode(struct task_struct *tsk, unsigned long adr); -extern int set_fpexc_mode(struct task_struct *tsk, unsigned int val); - -static inline unsigned int __unpack_fe01(unsigned int msr_bits) -{ - return ((msr_bits & MSR_FE0) >> 10) | ((msr_bits & MSR_FE1) >> 8); -} - -static inline unsigned int __pack_fe01(unsigned int fpmode) -{ - return ((fpmode << 10) & MSR_FE0) | ((fpmode << 8) & MSR_FE1); -} - -/* in process.c - for early bootup debug -- Cort */ -int ll_printk(const char *, ...); -void ll_puts(const char *); - -/* In misc.c */ -void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val); - -#define have_of (_machine == _MACH_chrp || _machine == _MACH_Pmac) - -#define cpu_relax() barrier() - -/* - * Prefetch macros. - */ -#define ARCH_HAS_PREFETCH -#define ARCH_HAS_PREFETCHW -#define ARCH_HAS_SPINLOCK_PREFETCH - -extern inline void prefetch(const void *x) -{ - __asm__ __volatile__ ("dcbt 0,%0" : : "r" (x)); -} - -extern inline void prefetchw(const void *x) -{ - __asm__ __volatile__ ("dcbtst 0,%0" : : "r" (x)); -} - -#define spin_lock_prefetch(x) prefetchw(x) - -extern int emulate_altivec(struct pt_regs *regs); - -#endif /* !__ASSEMBLY__ */ - -#endif /* __ASM_PPC_PROCESSOR_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/ptrace.h b/include/asm-ppc/ptrace.h deleted file mode 100644 index 7043c164b53..00000000000 --- a/include/asm-ppc/ptrace.h +++ /dev/null @@ -1,152 +0,0 @@ -#ifndef _PPC_PTRACE_H -#define _PPC_PTRACE_H - -/* - * This struct defines the way the registers are stored on the - * kernel stack during a system call or other kernel entry. - * - * this should only contain volatile regs - * since we can keep non-volatile in the thread_struct - * should set this up when only volatiles are saved - * by intr code. - * - * Since this is going on the stack, *CARE MUST BE TAKEN* to insure - * that the overall structure is a multiple of 16 bytes in length. - * - * Note that the offsets of the fields in this struct correspond with - * the PT_* values below. This simplifies arch/ppc/kernel/ptrace.c. - */ - -#ifndef __ASSEMBLY__ -struct pt_regs { - unsigned long gpr[32]; - unsigned long nip; - unsigned long msr; - unsigned long orig_gpr3; /* Used for restarting system calls */ - unsigned long ctr; - unsigned long link; - unsigned long xer; - unsigned long ccr; - unsigned long mq; /* 601 only (not used at present) */ - /* Used on APUS to hold IPL value. */ - unsigned long trap; /* Reason for being here */ - /* N.B. for critical exceptions on 4xx, the dar and dsisr - fields are overloaded to hold srr0 and srr1. */ - unsigned long dar; /* Fault registers */ - unsigned long dsisr; /* on 4xx/Book-E used for ESR */ - unsigned long result; /* Result of a system call */ -}; - -#endif /* __ASSEMBLY__ */ - -#ifdef __KERNEL__ -#define STACK_FRAME_OVERHEAD 16 /* size of minimum stack frame */ - -/* Size of stack frame allocated when calling signal handler. */ -#define __SIGNAL_FRAMESIZE 64 - -#ifndef __ASSEMBLY__ -#define instruction_pointer(regs) ((regs)->nip) -#ifdef CONFIG_SMP -extern unsigned long profile_pc(struct pt_regs *regs); -#else -#define profile_pc(regs) instruction_pointer(regs) -#endif - -#define user_mode(regs) (((regs)->msr & MSR_PR) != 0) - -#define force_successful_syscall_return() \ - do { \ - current_thread_info()->local_flags |= _TIFL_FORCE_NOERROR; \ - } while(0) - -/* - * We use the least-significant bit of the trap field to indicate - * whether we have saved the full set of registers, or only a - * partial set. A 1 there means the partial set. - * On 4xx we use the next bit to indicate whether the exception - * is a critical exception (1 means it is). - */ -#define FULL_REGS(regs) (((regs)->trap & 1) == 0) -#define IS_CRITICAL_EXC(regs) (((regs)->trap & 2) == 0) -#define TRAP(regs) ((regs)->trap & ~0xF) - -#define CHECK_FULL_REGS(regs) \ -do { \ - if ((regs)->trap & 1) \ - printk(KERN_CRIT "%s: partial register set\n", __FUNCTION__); \ -} while (0) -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -/* - * Offsets used by 'ptrace' system call interface. - * These can't be changed without breaking binary compatibility - * with MkLinux, etc. - */ -#define PT_R0 0 -#define PT_R1 1 -#define PT_R2 2 -#define PT_R3 3 -#define PT_R4 4 -#define PT_R5 5 -#define PT_R6 6 -#define PT_R7 7 -#define PT_R8 8 -#define PT_R9 9 -#define PT_R10 10 -#define PT_R11 11 -#define PT_R12 12 -#define PT_R13 13 -#define PT_R14 14 -#define PT_R15 15 -#define PT_R16 16 -#define PT_R17 17 -#define PT_R18 18 -#define PT_R19 19 -#define PT_R20 20 -#define PT_R21 21 -#define PT_R22 22 -#define PT_R23 23 -#define PT_R24 24 -#define PT_R25 25 -#define PT_R26 26 -#define PT_R27 27 -#define PT_R28 28 -#define PT_R29 29 -#define PT_R30 30 -#define PT_R31 31 - -#define PT_NIP 32 -#define PT_MSR 33 -#ifdef __KERNEL__ -#define PT_ORIG_R3 34 -#endif -#define PT_CTR 35 -#define PT_LNK 36 -#define PT_XER 37 -#define PT_CCR 38 -#define PT_MQ 39 - -#define PT_FPR0 48 /* each FP reg occupies 2 slots in this space */ -#define PT_FPR31 (PT_FPR0 + 2*31) -#define PT_FPSCR (PT_FPR0 + 2*32 + 1) - -/* Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go */ -#define PTRACE_GETVRREGS 18 -#define PTRACE_SETVRREGS 19 - -/* Get/set all the upper 32-bits of the SPE registers, accumulator, and - * spefscr, in one go */ -#define PTRACE_GETEVRREGS 20 -#define PTRACE_SETEVRREGS 21 - -/* - * Get or set a debug register. The first 16 are DABR registers and the - * second 16 are IABR registers. - */ -#define PTRACE_GET_DEBUGREG 25 -#define PTRACE_SET_DEBUGREG 26 - -#endif diff --git a/include/asm-ppc/reg.h b/include/asm-ppc/reg.h deleted file mode 100644 index 73c33e3ef9c..00000000000 --- a/include/asm-ppc/reg.h +++ /dev/null @@ -1,440 +0,0 @@ -/* - * Contains the definition of registers common to all PowerPC variants. - * If a register definition has been changed in a different PowerPC - * variant, we will case it in #ifndef XXX ... #endif, and have the - * number used in the Programming Environments Manual For 32-Bit - * Implementations of the PowerPC Architecture (a.k.a. Green Book) here. - */ - -#ifdef __KERNEL__ -#ifndef __ASM_PPC_REGS_H__ -#define __ASM_PPC_REGS_H__ - -#include <linux/stringify.h> - -/* Pickup Book E specific registers. */ -#if defined(CONFIG_BOOKE) || defined(CONFIG_40x) -#include <asm/reg_booke.h> -#endif - -/* Machine State Register (MSR) Fields */ -#define MSR_SF (1<<63) -#define MSR_ISF (1<<61) -#define MSR_VEC (1<<25) /* Enable AltiVec */ -#define MSR_POW (1<<18) /* Enable Power Management */ -#define MSR_WE (1<<18) /* Wait State Enable */ -#define MSR_TGPR (1<<17) /* TLB Update registers in use */ -#define MSR_CE (1<<17) /* Critical Interrupt Enable */ -#define MSR_ILE (1<<16) /* Interrupt Little Endian */ -#define MSR_EE (1<<15) /* External Interrupt Enable */ -#define MSR_PR (1<<14) /* Problem State / Privilege Level */ -#define MSR_FP (1<<13) /* Floating Point enable */ -#define MSR_ME (1<<12) /* Machine Check Enable */ -#define MSR_FE0 (1<<11) /* Floating Exception mode 0 */ -#define MSR_SE (1<<10) /* Single Step */ -#define MSR_BE (1<<9) /* Branch Trace */ -#define MSR_DE (1<<9) /* Debug Exception Enable */ -#define MSR_FE1 (1<<8) /* Floating Exception mode 1 */ -#define MSR_IP (1<<6) /* Exception prefix 0x000/0xFFF */ -#define MSR_IR (1<<5) /* Instruction Relocate */ -#define MSR_DR (1<<4) /* Data Relocate */ -#define MSR_PE (1<<3) /* Protection Enable */ -#define MSR_PX (1<<2) /* Protection Exclusive Mode */ -#define MSR_RI (1<<1) /* Recoverable Exception */ -#define MSR_LE (1<<0) /* Little Endian */ - -/* Default MSR for kernel mode. */ -#ifdef CONFIG_APUS_FAST_EXCEPT -#define MSR_KERNEL (MSR_ME|MSR_IP|MSR_RI|MSR_IR|MSR_DR) -#endif - -#ifndef MSR_KERNEL -#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR) -#endif - -#define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE) - -/* Floating Point Status and Control Register (FPSCR) Fields */ -#define FPSCR_FX 0x80000000 /* FPU exception summary */ -#define FPSCR_FEX 0x40000000 /* FPU enabled exception summary */ -#define FPSCR_VX 0x20000000 /* Invalid operation summary */ -#define FPSCR_OX 0x10000000 /* Overflow exception summary */ -#define FPSCR_UX 0x08000000 /* Underflow exception summary */ -#define FPSCR_ZX 0x04000000 /* Zero-devide exception summary */ -#define FPSCR_XX 0x02000000 /* Inexact exception summary */ -#define FPSCR_VXSNAN 0x01000000 /* Invalid op for SNaN */ -#define FPSCR_VXISI 0x00800000 /* Invalid op for Inv - Inv */ -#define FPSCR_VXIDI 0x00400000 /* Invalid op for Inv / Inv */ -#define FPSCR_VXZDZ 0x00200000 /* Invalid op for Zero / Zero */ -#define FPSCR_VXIMZ 0x00100000 /* Invalid op for Inv * Zero */ -#define FPSCR_VXVC 0x00080000 /* Invalid op for Compare */ -#define FPSCR_FR 0x00040000 /* Fraction rounded */ -#define FPSCR_FI 0x00020000 /* Fraction inexact */ -#define FPSCR_FPRF 0x0001f000 /* FPU Result Flags */ -#define FPSCR_FPCC 0x0000f000 /* FPU Condition Codes */ -#define FPSCR_VXSOFT 0x00000400 /* Invalid op for software request */ -#define FPSCR_VXSQRT 0x00000200 /* Invalid op for square root */ -#define FPSCR_VXCVI 0x00000100 /* Invalid op for integer convert */ -#define FPSCR_VE 0x00000080 /* Invalid op exception enable */ -#define FPSCR_OE 0x00000040 /* IEEE overflow exception enable */ -#define FPSCR_UE 0x00000020 /* IEEE underflow exception enable */ -#define FPSCR_ZE 0x00000010 /* IEEE zero divide exception enable */ -#define FPSCR_XE 0x00000008 /* FP inexact exception enable */ -#define FPSCR_NI 0x00000004 /* FPU non IEEE-Mode */ -#define FPSCR_RN 0x00000003 /* FPU rounding control */ - -/* Special Purpose Registers (SPRNs)*/ -#define SPRN_CTR 0x009 /* Count Register */ -#define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */ -#define SPRN_DAR 0x013 /* Data Address Register */ -#define SPRN_TBRL 0x10C /* Time Base Read Lower Register (user, R/O) */ -#define SPRN_TBRU 0x10D /* Time Base Read Upper Register (user, R/O) */ -#define SPRN_TBWL 0x11C /* Time Base Lower Register (super, R/W) */ -#define SPRN_TBWU 0x11D /* Time Base Upper Register (super, R/W) */ -#define SPRN_HIOR 0x137 /* 970 Hypervisor interrupt offset */ -#define SPRN_DBAT0L 0x219 /* Data BAT 0 Lower Register */ -#define SPRN_DBAT0U 0x218 /* Data BAT 0 Upper Register */ -#define SPRN_DBAT1L 0x21B /* Data BAT 1 Lower Register */ -#define SPRN_DBAT1U 0x21A /* Data BAT 1 Upper Register */ -#define SPRN_DBAT2L 0x21D /* Data BAT 2 Lower Register */ -#define SPRN_DBAT2U 0x21C /* Data BAT 2 Upper Register */ -#define SPRN_DBAT3L 0x21F /* Data BAT 3 Lower Register */ -#define SPRN_DBAT3U 0x21E /* Data BAT 3 Upper Register */ -#define SPRN_DBAT4L 0x239 /* Data BAT 4 Lower Register */ -#define SPRN_DBAT4U 0x238 /* Data BAT 4 Upper Register */ -#define SPRN_DBAT5L 0x23B /* Data BAT 5 Lower Register */ -#define SPRN_DBAT5U 0x23A /* Data BAT 5 Upper Register */ -#define SPRN_DBAT6L 0x23D /* Data BAT 6 Lower Register */ -#define SPRN_DBAT6U 0x23C /* Data BAT 6 Upper Register */ -#define SPRN_DBAT7L 0x23F /* Data BAT 7 Lower Register */ -#define SPRN_DBAT7U 0x23E /* Data BAT 7 Upper Register */ - -#define SPRN_DEC 0x016 /* Decrement Register */ -#define SPRN_DER 0x095 /* Debug Enable Regsiter */ -#define DER_RSTE 0x40000000 /* Reset Interrupt */ -#define DER_CHSTPE 0x20000000 /* Check Stop */ -#define DER_MCIE 0x10000000 /* Machine Check Interrupt */ -#define DER_EXTIE 0x02000000 /* External Interrupt */ -#define DER_ALIE 0x01000000 /* Alignment Interrupt */ -#define DER_PRIE 0x00800000 /* Program Interrupt */ -#define DER_FPUVIE 0x00400000 /* FP Unavailable Interrupt */ -#define DER_DECIE 0x00200000 /* Decrementer Interrupt */ -#define DER_SYSIE 0x00040000 /* System Call Interrupt */ -#define DER_TRE 0x00020000 /* Trace Interrupt */ -#define DER_SEIE 0x00004000 /* FP SW Emulation Interrupt */ -#define DER_ITLBMSE 0x00002000 /* Imp. Spec. Instruction TLB Miss */ -#define DER_ITLBERE 0x00001000 /* Imp. Spec. Instruction TLB Error */ -#define DER_DTLBMSE 0x00000800 /* Imp. Spec. Data TLB Miss */ -#define DER_DTLBERE 0x00000400 /* Imp. Spec. Data TLB Error */ -#define DER_LBRKE 0x00000008 /* Load/Store Breakpoint Interrupt */ -#define DER_IBRKE 0x00000004 /* Instruction Breakpoint Interrupt */ -#define DER_EBRKE 0x00000002 /* External Breakpoint Interrupt */ -#define DER_DPIE 0x00000001 /* Dev. Port Nonmaskable Request */ -#define SPRN_DMISS 0x3D0 /* Data TLB Miss Register */ -#define SPRN_DSISR 0x012 /* Data Storage Interrupt Status Register */ -#define SPRN_EAR 0x11A /* External Address Register */ -#define SPRN_HASH1 0x3D2 /* Primary Hash Address Register */ -#define SPRN_HASH2 0x3D3 /* Secondary Hash Address Resgister */ -#define SPRN_HID0 0x3F0 /* Hardware Implementation Register 0 */ -#define HID0_EMCP (1<<31) /* Enable Machine Check pin */ -#define HID0_EBA (1<<29) /* Enable Bus Address Parity */ -#define HID0_EBD (1<<28) /* Enable Bus Data Parity */ -#define HID0_SBCLK (1<<27) -#define HID0_EICE (1<<26) -#define HID0_TBEN (1<<26) /* Timebase enable - 745x */ -#define HID0_ECLK (1<<25) -#define HID0_PAR (1<<24) -#define HID0_STEN (1<<24) /* Software table search enable - 745x */ -#define HID0_HIGH_BAT (1<<23) /* Enable high BATs - 7455 */ -#define HID0_DOZE (1<<23) -#define HID0_NAP (1<<22) -#define HID0_SLEEP (1<<21) -#define HID0_DPM (1<<20) -#define HID0_BHTCLR (1<<18) /* Clear branch history table - 7450 */ -#define HID0_XAEN (1<<17) /* Extended addressing enable - 7450 */ -#define HID0_NHR (1<<16) /* Not hard reset (software bit-7450)*/ -#define HID0_ICE (1<<15) /* Instruction Cache Enable */ -#define HID0_DCE (1<<14) /* Data Cache Enable */ -#define HID0_ILOCK (1<<13) /* Instruction Cache Lock */ -#define HID0_DLOCK (1<<12) /* Data Cache Lock */ -#define HID0_ICFI (1<<11) /* Instr. Cache Flash Invalidate */ -#define HID0_DCI (1<<10) /* Data Cache Invalidate */ -#define HID0_SPD (1<<9) /* Speculative disable */ -#define HID0_DAPUEN (1<<8) /* Debug APU enable */ -#define HID0_SGE (1<<7) /* Store Gathering Enable */ -#define HID0_SIED (1<<7) /* Serial Instr. Execution [Disable] */ -#define HID0_DFCA (1<<6) /* Data Cache Flush Assist */ -#define HID0_LRSTK (1<<4) /* Link register stack - 745x */ -#define HID0_BTIC (1<<5) /* Branch Target Instr Cache Enable */ -#define HID0_ABE (1<<3) /* Address Broadcast Enable */ -#define HID0_FOLD (1<<3) /* Branch Folding enable - 745x */ -#define HID0_BHTE (1<<2) /* Branch History Table Enable */ -#define HID0_BTCD (1<<1) /* Branch target cache disable */ -#define HID0_NOPDST (1<<1) /* No-op dst, dstt, etc. instr. */ -#define HID0_NOPTI (1<<0) /* No-op dcbt and dcbst instr. */ - -#define SPRN_HID1 0x3F1 /* Hardware Implementation Register 1 */ -#define HID1_EMCP (1<<31) /* 7450 Machine Check Pin Enable */ -#define HID1_DFS (1<<22) /* 7447A Dynamic Frequency Scaling */ -#define HID1_PC0 (1<<16) /* 7450 PLL_CFG[0] */ -#define HID1_PC1 (1<<15) /* 7450 PLL_CFG[1] */ -#define HID1_PC2 (1<<14) /* 7450 PLL_CFG[2] */ -#define HID1_PC3 (1<<13) /* 7450 PLL_CFG[3] */ -#define HID1_SYNCBE (1<<11) /* 7450 ABE for sync, eieio */ -#define HID1_ABE (1<<10) /* 7450 Address Broadcast Enable */ -#define HID1_PS (1<<16) /* 750FX PLL selection */ -#define SPRN_HID2 0x3F8 /* Hardware Implementation Register 2 */ -#define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */ -#define SPRN_HID4 0x3F4 /* 970 HID4 */ -#define SPRN_HID5 0x3F6 /* 970 HID5 */ -#if !defined(SPRN_IAC1) && !defined(SPRN_IAC2) -#define SPRN_IAC1 0x3F4 /* Instruction Address Compare 1 */ -#define SPRN_IAC2 0x3F5 /* Instruction Address Compare 2 */ -#endif -#define SPRN_IBAT0L 0x211 /* Instruction BAT 0 Lower Register */ -#define SPRN_IBAT0U 0x210 /* Instruction BAT 0 Upper Register */ -#define SPRN_IBAT1L 0x213 /* Instruction BAT 1 Lower Register */ -#define SPRN_IBAT1U 0x212 /* Instruction BAT 1 Upper Register */ -#define SPRN_IBAT2L 0x215 /* Instruction BAT 2 Lower Register */ -#define SPRN_IBAT2U 0x214 /* Instruction BAT 2 Upper Register */ -#define SPRN_IBAT3L 0x217 /* Instruction BAT 3 Lower Register */ -#define SPRN_IBAT3U 0x216 /* Instruction BAT 3 Upper Register */ -#define SPRN_IBAT4L 0x231 /* Instruction BAT 4 Lower Register */ -#define SPRN_IBAT4U 0x230 /* Instruction BAT 4 Upper Register */ -#define SPRN_IBAT5L 0x233 /* Instruction BAT 5 Lower Register */ -#define SPRN_IBAT5U 0x232 /* Instruction BAT 5 Upper Register */ -#define SPRN_IBAT6L 0x235 /* Instruction BAT 6 Lower Register */ -#define SPRN_IBAT6U 0x234 /* Instruction BAT 6 Upper Register */ -#define SPRN_IBAT7L 0x237 /* Instruction BAT 7 Lower Register */ -#define SPRN_IBAT7U 0x236 /* Instruction BAT 7 Upper Register */ -#define SPRN_ICMP 0x3D5 /* Instruction TLB Compare Register */ -#define SPRN_ICTC 0x3FB /* Instruction Cache Throttling Control Reg */ -#define SPRN_ICTRL 0x3F3 /* 1011 7450 icache and interrupt ctrl */ -#define ICTRL_EICE 0x08000000 /* enable icache parity errs */ -#define ICTRL_EDC 0x04000000 /* enable dcache parity errs */ -#define ICTRL_EICP 0x00000100 /* enable icache par. check */ -#define SPRN_IMISS 0x3D4 /* Instruction TLB Miss Register */ -#define SPRN_IMMR 0x27E /* Internal Memory Map Register */ -#define SPRN_L2CR 0x3F9 /* Level 2 Cache Control Regsiter */ -#define SPRN_L2CR2 0x3f8 -#define L2CR_L2E 0x80000000 /* L2 enable */ -#define L2CR_L2PE 0x40000000 /* L2 parity enable */ -#define L2CR_L2SIZ_MASK 0x30000000 /* L2 size mask */ -#define L2CR_L2SIZ_256KB 0x10000000 /* L2 size 256KB */ -#define L2CR_L2SIZ_512KB 0x20000000 /* L2 size 512KB */ -#define L2CR_L2SIZ_1MB 0x30000000 /* L2 size 1MB */ -#define L2CR_L2CLK_MASK 0x0e000000 /* L2 clock mask */ -#define L2CR_L2CLK_DISABLED 0x00000000 /* L2 clock disabled */ -#define L2CR_L2CLK_DIV1 0x02000000 /* L2 clock / 1 */ -#define L2CR_L2CLK_DIV1_5 0x04000000 /* L2 clock / 1.5 */ -#define L2CR_L2CLK_DIV2 0x08000000 /* L2 clock / 2 */ -#define L2CR_L2CLK_DIV2_5 0x0a000000 /* L2 clock / 2.5 */ -#define L2CR_L2CLK_DIV3 0x0c000000 /* L2 clock / 3 */ -#define L2CR_L2RAM_MASK 0x01800000 /* L2 RAM type mask */ -#define L2CR_L2RAM_FLOW 0x00000000 /* L2 RAM flow through */ -#define L2CR_L2RAM_PIPE 0x01000000 /* L2 RAM pipelined */ -#define L2CR_L2RAM_PIPE_LW 0x01800000 /* L2 RAM pipelined latewr */ -#define L2CR_L2DO 0x00400000 /* L2 data only */ -#define L2CR_L2I 0x00200000 /* L2 global invalidate */ -#define L2CR_L2CTL 0x00100000 /* L2 RAM control */ -#define L2CR_L2WT 0x00080000 /* L2 write-through */ -#define L2CR_L2TS 0x00040000 /* L2 test support */ -#define L2CR_L2OH_MASK 0x00030000 /* L2 output hold mask */ -#define L2CR_L2OH_0_5 0x00000000 /* L2 output hold 0.5 ns */ -#define L2CR_L2OH_1_0 0x00010000 /* L2 output hold 1.0 ns */ -#define L2CR_L2SL 0x00008000 /* L2 DLL slow */ -#define L2CR_L2DF 0x00004000 /* L2 differential clock */ -#define L2CR_L2BYP 0x00002000 /* L2 DLL bypass */ -#define L2CR_L2IP 0x00000001 /* L2 GI in progress */ -#define L2CR_L2IO_745x 0x00100000 /* L2 instr. only (745x) */ -#define L2CR_L2DO_745x 0x00010000 /* L2 data only (745x) */ -#define L2CR_L2REP_745x 0x00001000 /* L2 repl. algorithm (745x) */ -#define L2CR_L2HWF_745x 0x00000800 /* L2 hardware flush (745x) */ -#define SPRN_L3CR 0x3FA /* Level 3 Cache Control Regsiter */ -#define L3CR_L3E 0x80000000 /* L3 enable */ -#define L3CR_L3PE 0x40000000 /* L3 data parity enable */ -#define L3CR_L3APE 0x20000000 /* L3 addr parity enable */ -#define L3CR_L3SIZ 0x10000000 /* L3 size */ -#define L3CR_L3CLKEN 0x08000000 /* L3 clock enable */ -#define L3CR_L3RES 0x04000000 /* L3 special reserved bit */ -#define L3CR_L3CLKDIV 0x03800000 /* L3 clock divisor */ -#define L3CR_L3IO 0x00400000 /* L3 instruction only */ -#define L3CR_L3SPO 0x00040000 /* L3 sample point override */ -#define L3CR_L3CKSP 0x00030000 /* L3 clock sample point */ -#define L3CR_L3PSP 0x0000e000 /* L3 P-clock sample point */ -#define L3CR_L3REP 0x00001000 /* L3 replacement algorithm */ -#define L3CR_L3HWF 0x00000800 /* L3 hardware flush */ -#define L3CR_L3I 0x00000400 /* L3 global invalidate */ -#define L3CR_L3RT 0x00000300 /* L3 SRAM type */ -#define L3CR_L3NIRCA 0x00000080 /* L3 non-integer ratio clock adj. */ -#define L3CR_L3DO 0x00000040 /* L3 data only mode */ -#define L3CR_PMEN 0x00000004 /* L3 private memory enable */ -#define L3CR_PMSIZ 0x00000001 /* L3 private memory size */ -#define SPRN_MSSCR0 0x3f6 /* Memory Subsystem Control Register 0 */ -#define SPRN_MSSSR0 0x3f7 /* Memory Subsystem Status Register 1 */ -#define SPRN_LDSTCR 0x3f8 /* Load/Store control register */ -#define SPRN_LDSTDB 0x3f4 /* */ -#define SPRN_LR 0x008 /* Link Register */ -#define SPRN_MMCR0 0x3B8 /* Monitor Mode Control Register 0 */ -#define SPRN_MMCR1 0x3BC /* Monitor Mode Control Register 1 */ -#ifndef SPRN_PIR -#define SPRN_PIR 0x3FF /* Processor Identification Register */ -#endif -#define SPRN_PMC1 0x3B9 /* Performance Counter Register 1 */ -#define SPRN_PMC2 0x3BA /* Performance Counter Register 2 */ -#define SPRN_PMC3 0x3BD /* Performance Counter Register 3 */ -#define SPRN_PMC4 0x3BE /* Performance Counter Register 4 */ -#define SPRN_PTEHI 0x3D5 /* 981 7450 PTE HI word (S/W TLB load) */ -#define SPRN_PTELO 0x3D6 /* 982 7450 PTE LO word (S/W TLB load) */ -#define SPRN_PVR 0x11F /* Processor Version Register */ -#define SPRN_RPA 0x3D6 /* Required Physical Address Register */ -#define SPRN_SDA 0x3BF /* Sampled Data Address Register */ -#define SPRN_SDR1 0x019 /* MMU Hash Base Register */ -#define SPRN_SIA 0x3BB /* Sampled Instruction Address Register */ -#define SPRN_SPRG0 0x110 /* Special Purpose Register General 0 */ -#define SPRN_SPRG1 0x111 /* Special Purpose Register General 1 */ -#define SPRN_SPRG2 0x112 /* Special Purpose Register General 2 */ -#define SPRN_SPRG3 0x113 /* Special Purpose Register General 3 */ -#define SPRN_SPRG4 0x114 /* Special Purpose Register General 4 */ -#define SPRN_SPRG5 0x115 /* Special Purpose Register General 5 */ -#define SPRN_SPRG6 0x116 /* Special Purpose Register General 6 */ -#define SPRN_SPRG7 0x117 /* Special Purpose Register General 7 */ -#define SPRN_SRR0 0x01A /* Save/Restore Register 0 */ -#define SPRN_SRR1 0x01B /* Save/Restore Register 1 */ -#ifndef SPRN_SVR -#define SPRN_SVR 0x11E /* System Version Register */ -#endif -#define SPRN_THRM1 0x3FC /* Thermal Management Register 1 */ -/* these bits were defined in inverted endian sense originally, ugh, confusing */ -#define THRM1_TIN (1 << 31) -#define THRM1_TIV (1 << 30) -#define THRM1_THRES(x) ((x&0x7f)<<23) -#define THRM3_SITV(x) ((x&0x3fff)<<1) -#define THRM1_TID (1<<2) -#define THRM1_TIE (1<<1) -#define THRM1_V (1<<0) -#define SPRN_THRM2 0x3FD /* Thermal Management Register 2 */ -#define SPRN_THRM3 0x3FE /* Thermal Management Register 3 */ -#define THRM3_E (1<<0) -#define SPRN_TLBMISS 0x3D4 /* 980 7450 TLB Miss Register */ -#define SPRN_UMMCR0 0x3A8 /* User Monitor Mode Control Register 0 */ -#define SPRN_UMMCR1 0x3AC /* User Monitor Mode Control Register 0 */ -#define SPRN_UPMC1 0x3A9 /* User Performance Counter Register 1 */ -#define SPRN_UPMC2 0x3AA /* User Performance Counter Register 2 */ -#define SPRN_UPMC3 0x3AD /* User Performance Counter Register 3 */ -#define SPRN_UPMC4 0x3AE /* User Performance Counter Register 4 */ -#define SPRN_USIA 0x3AB /* User Sampled Instruction Address Register */ -#define SPRN_VRSAVE 0x100 /* Vector Register Save Register */ -#define SPRN_XER 0x001 /* Fixed Point Exception Register */ - -/* Bit definitions for MMCR0 and PMC1 / PMC2. */ -#define MMCR0_PMC1_CYCLES (1 << 7) -#define MMCR0_PMC1_ICACHEMISS (5 << 7) -#define MMCR0_PMC1_DTLB (6 << 7) -#define MMCR0_PMC2_DCACHEMISS 0x6 -#define MMCR0_PMC2_CYCLES 0x1 -#define MMCR0_PMC2_ITLB 0x7 -#define MMCR0_PMC2_LOADMISSTIME 0x5 -#define MMCR0_PMXE (1 << 26) - -/* Processor Version Register */ - -/* Processor Version Register (PVR) field extraction */ - -#define PVR_VER(pvr) (((pvr) >> 16) & 0xFFFF) /* Version field */ -#define PVR_REV(pvr) (((pvr) >> 0) & 0xFFFF) /* Revison field */ - -/* - * IBM has further subdivided the standard PowerPC 16-bit version and - * revision subfields of the PVR for the PowerPC 403s into the following: - */ - -#define PVR_FAM(pvr) (((pvr) >> 20) & 0xFFF) /* Family field */ -#define PVR_MEM(pvr) (((pvr) >> 16) & 0xF) /* Member field */ -#define PVR_CORE(pvr) (((pvr) >> 12) & 0xF) /* Core field */ -#define PVR_CFG(pvr) (((pvr) >> 8) & 0xF) /* Configuration field */ -#define PVR_MAJ(pvr) (((pvr) >> 4) & 0xF) /* Major revision field */ -#define PVR_MIN(pvr) (((pvr) >> 0) & 0xF) /* Minor revision field */ - -/* Processor Version Numbers */ - -#define PVR_403GA 0x00200000 -#define PVR_403GB 0x00200100 -#define PVR_403GC 0x00200200 -#define PVR_403GCX 0x00201400 -#define PVR_405GP 0x40110000 -#define PVR_STB03XXX 0x40310000 -#define PVR_NP405H 0x41410000 -#define PVR_NP405L 0x41610000 -#define PVR_601 0x00010000 -#define PVR_602 0x00050000 -#define PVR_603 0x00030000 -#define PVR_603e 0x00060000 -#define PVR_603ev 0x00070000 -#define PVR_603r 0x00071000 -#define PVR_604 0x00040000 -#define PVR_604e 0x00090000 -#define PVR_604r 0x000A0000 -#define PVR_620 0x00140000 -#define PVR_740 0x00080000 -#define PVR_750 PVR_740 -#define PVR_740P 0x10080000 -#define PVR_750P PVR_740P -#define PVR_7400 0x000C0000 -#define PVR_7410 0x800C0000 -#define PVR_7450 0x80000000 -#define PVR_8540 0x80200000 -#define PVR_8560 0x80200000 -/* - * For the 8xx processors, all of them report the same PVR family for - * the PowerPC core. The various versions of these processors must be - * differentiated by the version number in the Communication Processor - * Module (CPM). - */ -#define PVR_821 0x00500000 -#define PVR_823 PVR_821 -#define PVR_850 PVR_821 -#define PVR_860 PVR_821 -#define PVR_8240 0x00810100 -#define PVR_8245 0x80811014 -#define PVR_8260 PVR_8240 - -#if 0 -/* Segment Registers */ -#define SR0 0 -#define SR1 1 -#define SR2 2 -#define SR3 3 -#define SR4 4 -#define SR5 5 -#define SR6 6 -#define SR7 7 -#define SR8 8 -#define SR9 9 -#define SR10 10 -#define SR11 11 -#define SR12 12 -#define SR13 13 -#define SR14 14 -#define SR15 15 -#endif - -/* Macros for setting and retrieving special purpose registers */ -#ifndef __ASSEMBLY__ -#define mfmsr() ({unsigned int rval; \ - asm volatile("mfmsr %0" : "=r" (rval)); rval;}) -#define mtmsr(v) asm volatile("mtmsr %0" : : "r" (v)) - -#define mfspr(rn) ({unsigned int rval; \ - asm volatile("mfspr %0," __stringify(rn) \ - : "=r" (rval)); rval;}) -#define mtspr(rn, v) asm volatile("mtspr " __stringify(rn) ",%0" : : "r" (v)) - -#define mfsrin(v) ({unsigned int rval; \ - asm volatile("mfsrin %0,%1" : "=r" (rval) : "r" (v)); \ - rval;}) - -#define proc_trap() asm volatile("trap") -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_PPC_REGS_H__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/rwsem.h b/include/asm-ppc/rwsem.h deleted file mode 100644 index 3e738f483c1..00000000000 --- a/include/asm-ppc/rwsem.h +++ /dev/null @@ -1,172 +0,0 @@ -/* - * include/asm-ppc/rwsem.h: R/W semaphores for PPC using the stuff - * in lib/rwsem.c. Adapted largely from include/asm-i386/rwsem.h - * by Paul Mackerras <paulus@samba.org>. - */ - -#ifndef _PPC_RWSEM_H -#define _PPC_RWSEM_H - -#ifdef __KERNEL__ -#include <linux/list.h> -#include <linux/spinlock.h> -#include <asm/atomic.h> -#include <asm/system.h> - -/* - * the semaphore definition - */ -struct rw_semaphore { - /* XXX this should be able to be an atomic_t -- paulus */ - signed long count; -#define RWSEM_UNLOCKED_VALUE 0x00000000 -#define RWSEM_ACTIVE_BIAS 0x00000001 -#define RWSEM_ACTIVE_MASK 0x0000ffff -#define RWSEM_WAITING_BIAS (-0x00010000) -#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS -#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) - spinlock_t wait_lock; - struct list_head wait_list; -#if RWSEM_DEBUG - int debug; -#endif -}; - -/* - * initialisation - */ -#if RWSEM_DEBUG -#define __RWSEM_DEBUG_INIT , 0 -#else -#define __RWSEM_DEBUG_INIT /* */ -#endif - -#define __RWSEM_INITIALIZER(name) \ - { RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \ - LIST_HEAD_INIT((name).wait_list) \ - __RWSEM_DEBUG_INIT } - -#define DECLARE_RWSEM(name) \ - struct rw_semaphore name = __RWSEM_INITIALIZER(name) - -extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem); - -static inline void init_rwsem(struct rw_semaphore *sem) -{ - sem->count = RWSEM_UNLOCKED_VALUE; - spin_lock_init(&sem->wait_lock); - INIT_LIST_HEAD(&sem->wait_list); -#if RWSEM_DEBUG - sem->debug = 0; -#endif -} - -/* - * lock for reading - */ -static inline void __down_read(struct rw_semaphore *sem) -{ - if (atomic_inc_return((atomic_t *)(&sem->count)) > 0) - smp_wmb(); - else - rwsem_down_read_failed(sem); -} - -static inline int __down_read_trylock(struct rw_semaphore *sem) -{ - int tmp; - - while ((tmp = sem->count) >= 0) { - if (tmp == cmpxchg(&sem->count, tmp, - tmp + RWSEM_ACTIVE_READ_BIAS)) { - smp_wmb(); - return 1; - } - } - return 0; -} - -/* - * lock for writing - */ -static inline void __down_write(struct rw_semaphore *sem) -{ - int tmp; - - tmp = atomic_add_return(RWSEM_ACTIVE_WRITE_BIAS, - (atomic_t *)(&sem->count)); - if (tmp == RWSEM_ACTIVE_WRITE_BIAS) - smp_wmb(); - else - rwsem_down_write_failed(sem); -} - -static inline int __down_write_trylock(struct rw_semaphore *sem) -{ - int tmp; - - tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE, - RWSEM_ACTIVE_WRITE_BIAS); - smp_wmb(); - return tmp == RWSEM_UNLOCKED_VALUE; -} - -/* - * unlock after reading - */ -static inline void __up_read(struct rw_semaphore *sem) -{ - int tmp; - - smp_wmb(); - tmp = atomic_dec_return((atomic_t *)(&sem->count)); - if (tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0) - rwsem_wake(sem); -} - -/* - * unlock after writing - */ -static inline void __up_write(struct rw_semaphore *sem) -{ - smp_wmb(); - if (atomic_sub_return(RWSEM_ACTIVE_WRITE_BIAS, - (atomic_t *)(&sem->count)) < 0) - rwsem_wake(sem); -} - -/* - * implement atomic add functionality - */ -static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem) -{ - atomic_add(delta, (atomic_t *)(&sem->count)); -} - -/* - * downgrade write lock to read lock - */ -static inline void __downgrade_write(struct rw_semaphore *sem) -{ - int tmp; - - smp_wmb(); - tmp = atomic_add_return(-RWSEM_WAITING_BIAS, (atomic_t *)(&sem->count)); - if (tmp < 0) - rwsem_downgrade_wake(sem); -} - -/* - * implement exchange and add functionality - */ -static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem) -{ - smp_mb(); - return atomic_add_return(delta, (atomic_t *)(&sem->count)); -} - -#endif /* __KERNEL__ */ -#endif /* _PPC_RWSEM_XADD_H */ diff --git a/include/asm-ppc/scatterlist.h b/include/asm-ppc/scatterlist.h deleted file mode 100644 index f21f18f5654..00000000000 --- a/include/asm-ppc/scatterlist.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifdef __KERNEL__ -#ifndef _PPC_SCATTERLIST_H -#define _PPC_SCATTERLIST_H - -#include <asm/dma.h> - -struct scatterlist { - struct page *page; - unsigned int offset; - dma_addr_t dma_address; - unsigned int length; -}; - -/* - * These macros should be used after a pci_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns, or alternatively stop on the first sg_dma_len(sg) which - * is 0. - */ -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) - -#endif /* !(_PPC_SCATTERLIST_H) */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/seccomp.h b/include/asm-ppc/seccomp.h deleted file mode 100644 index 666c4da96d8..00000000000 --- a/include/asm-ppc/seccomp.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef _ASM_SECCOMP_H - -#include <linux/unistd.h> - -#define __NR_seccomp_read __NR_read -#define __NR_seccomp_write __NR_write -#define __NR_seccomp_exit __NR_exit -#define __NR_seccomp_sigreturn __NR_rt_sigreturn - -#endif /* _ASM_SECCOMP_H */ diff --git a/include/asm-ppc/sections.h b/include/asm-ppc/sections.h deleted file mode 100644 index ba8f43ac9bf..00000000000 --- a/include/asm-ppc/sections.h +++ /dev/null @@ -1,33 +0,0 @@ -#ifdef __KERNEL__ -#ifndef _PPC_SECTIONS_H -#define _PPC_SECTIONS_H - -#include <asm-generic/sections.h> - -#define __pmac __attribute__ ((__section__ (".pmac.text"))) -#define __pmacdata __attribute__ ((__section__ (".pmac.data"))) -#define __pmacfunc(__argpmac) \ - __argpmac __pmac; \ - __argpmac - -#define __prep __attribute__ ((__section__ (".prep.text"))) -#define __prepdata __attribute__ ((__section__ (".prep.data"))) -#define __prepfunc(__argprep) \ - __argprep __prep; \ - __argprep - -#define __chrp __attribute__ ((__section__ (".chrp.text"))) -#define __chrpdata __attribute__ ((__section__ (".chrp.data"))) -#define __chrpfunc(__argchrp) \ - __argchrp __chrp; \ - __argchrp - -/* this is actually just common chrp/pmac code, not OF code -- Cort */ -#define __openfirmware __attribute__ ((__section__ (".openfirmware.text"))) -#define __openfirmwaredata __attribute__ ((__section__ (".openfirmware.data"))) -#define __openfirmwarefunc(__argopenfirmware) \ - __argopenfirmware __openfirmware; \ - __argopenfirmware - -#endif /* _PPC_SECTIONS_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/semaphore.h b/include/asm-ppc/semaphore.h deleted file mode 100644 index 89e6e73be08..00000000000 --- a/include/asm-ppc/semaphore.h +++ /dev/null @@ -1,111 +0,0 @@ -#ifndef _PPC_SEMAPHORE_H -#define _PPC_SEMAPHORE_H - -/* - * Swiped from asm-sparc/semaphore.h and modified - * -- Cort (cort@cs.nmt.edu) - * - * Stole some rw spinlock-based semaphore stuff from asm-alpha/semaphore.h - * -- Ani Joshi (ajoshi@unixbox.com) - * - * Remove spinlock-based RW semaphores; RW semaphore definitions are - * now in rwsem.h and we use the generic lib/rwsem.c implementation. - * Rework semaphores to use atomic_dec_if_positive. - * -- Paul Mackerras (paulus@samba.org) - */ - -#ifdef __KERNEL__ - -#include <asm/atomic.h> -#include <asm/system.h> -#include <linux/wait.h> -#include <linux/rwsem.h> - -struct semaphore { - /* - * Note that any negative value of count is equivalent to 0, - * but additionally indicates that some process(es) might be - * sleeping on `wait'. - */ - atomic_t count; - wait_queue_head_t wait; -}; - -#define __SEMAPHORE_INITIALIZER(name, n) \ -{ \ - .count = ATOMIC_INIT(n), \ - .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \ -} - -#define __MUTEX_INITIALIZER(name) \ - __SEMAPHORE_INITIALIZER(name, 1) - -#define __DECLARE_SEMAPHORE_GENERIC(name, count) \ - struct semaphore name = __SEMAPHORE_INITIALIZER(name,count) - -#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name, 1) -#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC(name, 0) - -static inline void sema_init (struct semaphore *sem, int val) -{ - atomic_set(&sem->count, val); - init_waitqueue_head(&sem->wait); -} - -static inline void init_MUTEX (struct semaphore *sem) -{ - sema_init(sem, 1); -} - -static inline void init_MUTEX_LOCKED (struct semaphore *sem) -{ - sema_init(sem, 0); -} - -extern void __down(struct semaphore * sem); -extern int __down_interruptible(struct semaphore * sem); -extern void __up(struct semaphore * sem); - -extern inline void down(struct semaphore * sem) -{ - might_sleep(); - - /* - * Try to get the semaphore, take the slow path if we fail. - */ - if (atomic_dec_return(&sem->count) < 0) - __down(sem); - smp_wmb(); -} - -extern inline int down_interruptible(struct semaphore * sem) -{ - int ret = 0; - - might_sleep(); - - if (atomic_dec_return(&sem->count) < 0) - ret = __down_interruptible(sem); - smp_wmb(); - return ret; -} - -extern inline int down_trylock(struct semaphore * sem) -{ - int ret; - - ret = atomic_dec_if_positive(&sem->count) < 0; - smp_wmb(); - return ret; -} - -extern inline void up(struct semaphore * sem) -{ - smp_wmb(); - if (atomic_inc_return(&sem->count) <= 0) - __up(sem); -} - -#endif /* __KERNEL__ */ - -#endif /* !(_PPC_SEMAPHORE_H) */ diff --git a/include/asm-ppc/sigcontext.h b/include/asm-ppc/sigcontext.h deleted file mode 100644 index b7a417e0a92..00000000000 --- a/include/asm-ppc/sigcontext.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef _ASM_PPC_SIGCONTEXT_H -#define _ASM_PPC_SIGCONTEXT_H - -#include <asm/ptrace.h> -#include <linux/compiler.h> - -struct sigcontext { - unsigned long _unused[4]; - int signal; - unsigned long handler; - unsigned long oldmask; - struct pt_regs __user *regs; -}; - -#endif diff --git a/include/asm-ppc/smp.h b/include/asm-ppc/smp.h index 829481c0a9d..30e9268a888 100644 --- a/include/asm-ppc/smp.h +++ b/include/asm-ppc/smp.h @@ -35,6 +35,7 @@ extern cpumask_t cpu_possible_map; extern unsigned long smp_proc_in_lock[]; extern volatile unsigned long cpu_callin_map[]; extern int smp_tb_synchronized; +extern struct smp_ops_t *smp_ops; extern void smp_send_tlb_invalidate(int); extern void smp_send_xmon_break(int cpu); @@ -45,32 +46,31 @@ extern int __cpu_disable(void); extern void __cpu_die(unsigned int cpu); extern void cpu_die(void) __attribute__((noreturn)); -#define NO_PROC_ID 0xFF /* No processor magic marker */ -#define PROC_CHANGE_PENALTY 20 - #define raw_smp_processor_id() (current_thread_info()->cpu) extern int __cpu_up(unsigned int cpu); extern int smp_hw_index[]; -#define hard_smp_processor_id() (smp_hw_index[smp_processor_id()]) - -struct klock_info_struct { - unsigned long kernel_flag; - unsigned char akp; -}; - -extern struct klock_info_struct klock_info; -#define KLOCK_HELD 0xffffffff -#define KLOCK_CLEAR 0x0 - +#define hard_smp_processor_id() (smp_hw_index[smp_processor_id()]) +#define get_hard_smp_processor_id(cpu) (smp_hw_index[(cpu)]) +#define set_hard_smp_processor_id(cpu, phys)\ + (smp_hw_index[(cpu)] = (phys)) + #endif /* __ASSEMBLY__ */ #else /* !(CONFIG_SMP) */ static inline void cpu_die(void) { } +#define get_hard_smp_processor_id(cpu) 0 +#define set_hard_smp_processor_id(cpu, phys) +#define hard_smp_processor_id() 0 #endif /* !(CONFIG_SMP) */ +#ifndef __ASSEMBLY__ +extern int boot_cpuid; +extern int boot_cpuid_phys; +#endif + #endif /* !(_PPC_SMP_H) */ #endif /* __KERNEL__ */ diff --git a/include/asm-ppc/spinlock.h b/include/asm-ppc/spinlock.h index 20edcf2a6e0..5c64b75f029 100644 --- a/include/asm-ppc/spinlock.h +++ b/include/asm-ppc/spinlock.h @@ -9,7 +9,7 @@ * (the type definitions are in asm/raw_spinlock_types.h) */ -#define __raw_spin_is_locked(x) ((x)->lock != 0) +#define __raw_spin_is_locked(x) ((x)->slock != 0) #define __raw_spin_unlock_wait(lock) \ do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0) #define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock) @@ -31,17 +31,17 @@ static inline void __raw_spin_lock(raw_spinlock_t *lock) bne- 2b\n\ isync" : "=&r"(tmp) - : "r"(&lock->lock), "r"(1) + : "r"(&lock->slock), "r"(1) : "cr0", "memory"); } static inline void __raw_spin_unlock(raw_spinlock_t *lock) { __asm__ __volatile__("eieio # __raw_spin_unlock": : :"memory"); - lock->lock = 0; + lock->slock = 0; } -#define __raw_spin_trylock(l) (!test_and_set_bit(0,&(l)->lock)) +#define __raw_spin_trylock(l) (!test_and_set_bit(0,(volatile unsigned long *)(&(l)->slock))) /* * Read-write spinlocks, allowing multiple readers diff --git a/include/asm-ppc/spinlock_types.h b/include/asm-ppc/spinlock_types.h deleted file mode 100644 index 7919ccc75b8..00000000000 --- a/include/asm-ppc/spinlock_types.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef __ASM_SPINLOCK_TYPES_H -#define __ASM_SPINLOCK_TYPES_H - -#ifndef __LINUX_SPINLOCK_TYPES_H -# error "please don't include this file directly" -#endif - -typedef struct { - volatile unsigned long lock; -} raw_spinlock_t; - -#define __RAW_SPIN_LOCK_UNLOCKED { 0 } - -typedef struct { - volatile signed int lock; -} raw_rwlock_t; - -#define __RAW_RW_LOCK_UNLOCKED { 0 } - -#endif diff --git a/include/asm-ppc/stat.h b/include/asm-ppc/stat.h deleted file mode 100644 index cadb3429849..00000000000 --- a/include/asm-ppc/stat.h +++ /dev/null @@ -1,69 +0,0 @@ -#ifndef _PPC_STAT_H -#define _PPC_STAT_H - -#ifdef __KERNEL__ -#include <linux/types.h> -#endif /* __KERNEL__ */ - -struct __old_kernel_stat { - unsigned short st_dev; - unsigned short st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned long st_size; - unsigned long st_atime; - unsigned long st_mtime; - unsigned long st_ctime; -}; - -#define STAT_HAVE_NSEC 1 - -struct stat { - unsigned st_dev; - ino_t st_ino; - mode_t st_mode; - nlink_t st_nlink; - uid_t st_uid; - gid_t st_gid; - unsigned st_rdev; - off_t st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; -}; - -/* This matches struct stat64 in glibc2.1. - */ -struct stat64 { - unsigned long long st_dev; /* Device. */ - unsigned long long st_ino; /* File serial number. */ - unsigned int st_mode; /* File mode. */ - unsigned int st_nlink; /* Link count. */ - unsigned int st_uid; /* User ID of the file's owner. */ - unsigned int st_gid; /* Group ID of the file's group. */ - unsigned long long st_rdev; /* Device number, if device. */ - unsigned short int __pad2; - long long st_size; /* Size of file, in bytes. */ - long st_blksize; /* Optimal block size for I/O. */ - - long long st_blocks; /* Number 512-byte blocks allocated. */ - long st_atime; /* Time of last access. */ - unsigned long st_atime_nsec; - long st_mtime; /* Time of last modification. */ - unsigned long int st_mtime_nsec; - long st_ctime; /* Time of last status change. */ - unsigned long int st_ctime_nsec; - unsigned long int __unused4; - unsigned long int __unused5; -}; -#endif diff --git a/include/asm-ppc/statfs.h b/include/asm-ppc/statfs.h deleted file mode 100644 index 807c69954a1..00000000000 --- a/include/asm-ppc/statfs.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef _PPC_STATFS_H -#define _PPC_STATFS_H - -#include <asm-generic/statfs.h> -#endif - - - diff --git a/include/asm-ppc/system.h b/include/asm-ppc/system.h index d754ab570fe..bd99cb53a19 100644 --- a/include/asm-ppc/system.h +++ b/include/asm-ppc/system.h @@ -70,25 +70,47 @@ extern void _set_L3CR(unsigned long); #endif extern void via_cuda_init(void); extern void pmac_nvram_init(void); +extern void chrp_nvram_init(void); extern void read_rtc_time(void); extern void pmac_find_display(void); extern void giveup_fpu(struct task_struct *); extern void enable_kernel_fp(void); +extern void flush_fp_to_thread(struct task_struct *); extern void enable_kernel_altivec(void); extern void giveup_altivec(struct task_struct *); extern void load_up_altivec(struct task_struct *); +extern int emulate_altivec(struct pt_regs *); extern void giveup_spe(struct task_struct *); extern void load_up_spe(struct task_struct *); extern int fix_alignment(struct pt_regs *); -extern void cvt_fd(float *from, double *to, unsigned long *fpscr); -extern void cvt_df(double *from, float *to, unsigned long *fpscr); +extern void cvt_fd(float *from, double *to, struct thread_struct *thread); +extern void cvt_df(double *from, float *to, struct thread_struct *thread); + +#ifdef CONFIG_ALTIVEC +extern void flush_altivec_to_thread(struct task_struct *); +#else +static inline void flush_altivec_to_thread(struct task_struct *t) +{ +} +#endif + +#ifdef CONFIG_SPE +extern void flush_spe_to_thread(struct task_struct *); +#else +static inline void flush_spe_to_thread(struct task_struct *t) +{ +} +#endif + extern int call_rtas(const char *, int, int, unsigned long *, ...); extern void cacheable_memzero(void *p, unsigned int nb); extern void *cacheable_memcpy(void *, const void *, unsigned int); extern int do_page_fault(struct pt_regs *, unsigned long, unsigned long); extern void bad_page_fault(struct pt_regs *, unsigned long, int); -extern void die(const char *, struct pt_regs *, long); +extern int die(const char *, struct pt_regs *, long); extern void _exception(int, struct pt_regs *, int, unsigned long); +void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val); + #ifdef CONFIG_BOOKE_WDT extern u32 booke_wdt_enabled; extern u32 booke_wdt_period; diff --git a/include/asm-ppc/thread_info.h b/include/asm-ppc/thread_info.h deleted file mode 100644 index 27903db42ef..00000000000 --- a/include/asm-ppc/thread_info.h +++ /dev/null @@ -1,107 +0,0 @@ -/* thread_info.h: PPC low-level thread information - * adapted from the i386 version by Paul Mackerras - * - * Copyright (C) 2002 David Howells (dhowells@redhat.com) - * - Incorporating suggestions made by Linus Torvalds and Dave Miller - */ - -#ifndef _ASM_THREAD_INFO_H -#define _ASM_THREAD_INFO_H - -#ifdef __KERNEL__ -#ifndef __ASSEMBLY__ -/* - * low level task data. - * If you change this, change the TI_* offsets below to match. - */ -struct thread_info { - struct task_struct *task; /* main task structure */ - struct exec_domain *exec_domain; /* execution domain */ - unsigned long flags; /* low level flags */ - unsigned long local_flags; /* non-racy flags */ - int cpu; /* cpu we're on */ - int preempt_count; /* 0 => preemptable, - <0 => BUG */ - struct restart_block restart_block; -}; - -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .flags = 0, \ - .local_flags = 0, \ - .cpu = 0, \ - .preempt_count = 1, \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ -} - -#define init_thread_info (init_thread_union.thread_info) -#define init_stack (init_thread_union.stack) - -/* - * macros/functions for gaining access to the thread information structure - */ - -/* how to get the thread information struct from C */ -static inline struct thread_info *current_thread_info(void) -{ - struct thread_info *ti; - __asm__("rlwinm %0,1,0,0,18" : "=r"(ti)); - return ti; -} - -/* thread information allocation */ -#define alloc_thread_info(tsk) ((struct thread_info *) \ - __get_free_pages(GFP_KERNEL, 1)) -#define free_thread_info(ti) free_pages((unsigned long) (ti), 1) -#define get_thread_info(ti) get_task_struct((ti)->task) -#define put_thread_info(ti) put_task_struct((ti)->task) -#endif /* __ASSEMBLY__ */ - -/* - * Size of kernel stack for each process. - */ -#define THREAD_SIZE 8192 /* 2 pages */ - -#define PREEMPT_ACTIVE 0x10000000 - -/* - * thread information flag bit numbers - */ -#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -#define TIF_NOTIFY_RESUME 1 /* resumption notification requested */ -#define TIF_SIGPENDING 2 /* signal pending */ -#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ -#define TIF_POLLING_NRFLAG 4 /* true if poll_idle() is polling - TIF_NEED_RESCHED */ -#define TIF_MEMDIE 5 -#define TIF_SYSCALL_AUDIT 6 /* syscall auditing active */ -#define TIF_SECCOMP 7 /* secure computing */ - -/* as above, but as bit values */ -#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) -#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME) -#define _TIF_SIGPENDING (1<<TIF_SIGPENDING) -#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) -#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) -#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT) -#define _TIF_SECCOMP (1<<TIF_SECCOMP) - -#define _TIF_SYSCALL_T_OR_A (_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP) - -/* - * Non racy (local) flags bit numbers - */ -#define TIFL_FORCE_NOERROR 0 /* don't return error from current - syscall even if result < 0 */ - -/* as above, but as bit values */ -#define _TIFL_FORCE_NOERROR (1<<TIFL_FORCE_NOERROR) - - -#endif /* __KERNEL__ */ - -#endif /* _ASM_THREAD_INFO_H */ diff --git a/include/asm-ppc/tlb.h b/include/asm-ppc/tlb.h deleted file mode 100644 index 2c142c5d858..00000000000 --- a/include/asm-ppc/tlb.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * TLB shootdown specifics for PPC - * - * Copyright (C) 2002 Paul Mackerras, IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _PPC_TLB_H -#define _PPC_TLB_H - -#include <linux/config.h> -#include <asm/pgtable.h> -#include <asm/pgalloc.h> -#include <asm/tlbflush.h> -#include <asm/page.h> -#include <asm/mmu.h> - -#ifdef CONFIG_PPC_STD_MMU -/* Classic PPC with hash-table based MMU... */ - -struct mmu_gather; -extern void tlb_flush(struct mmu_gather *tlb); - -/* Get the generic bits... */ -#include <asm-generic/tlb.h> - -/* Nothing needed here in fact... */ -#define tlb_start_vma(tlb, vma) do { } while (0) -#define tlb_end_vma(tlb, vma) do { } while (0) - -extern void flush_hash_entry(struct mm_struct *mm, pte_t *ptep, - unsigned long address); - -static inline void __tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, - unsigned long address) -{ - if (pte_val(*ptep) & _PAGE_HASHPTE) - flush_hash_entry(tlb->mm, ptep, address); -} - -#else -/* Embedded PPC with software-loaded TLB, very simple... */ - -#define tlb_start_vma(tlb, vma) do { } while (0) -#define tlb_end_vma(tlb, vma) do { } while (0) -#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0) -#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) - -/* Get the generic bits... */ -#include <asm-generic/tlb.h> - -#endif /* CONFIG_PPC_STD_MMU */ - -#endif /* __PPC_TLB_H */ diff --git a/include/asm-ppc/tlbflush.h b/include/asm-ppc/tlbflush.h deleted file mode 100644 index 9afee4ffc83..00000000000 --- a/include/asm-ppc/tlbflush.h +++ /dev/null @@ -1,115 +0,0 @@ -/* - * include/asm-ppc/tlbflush.h - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifdef __KERNEL__ -#ifndef _PPC_TLBFLUSH_H -#define _PPC_TLBFLUSH_H - -#include <linux/config.h> -#include <linux/mm.h> - -extern void _tlbie(unsigned long address); -extern void _tlbia(void); - -#if defined(CONFIG_4xx) - -#ifndef CONFIG_44x -#define __tlbia() asm volatile ("sync; tlbia; isync" : : : "memory") -#else -#define __tlbia _tlbia -#endif - -static inline void flush_tlb_mm(struct mm_struct *mm) - { __tlbia(); } -static inline void flush_tlb_page(struct vm_area_struct *vma, - unsigned long vmaddr) - { _tlbie(vmaddr); } -static inline void flush_tlb_page_nohash(struct vm_area_struct *vma, - unsigned long vmaddr) - { _tlbie(vmaddr); } -static inline void flush_tlb_range(struct vm_area_struct *vma, - unsigned long start, unsigned long end) - { __tlbia(); } -static inline void flush_tlb_kernel_range(unsigned long start, - unsigned long end) - { __tlbia(); } - -#elif defined(CONFIG_FSL_BOOKE) - -/* TODO: determine if flush_tlb_range & flush_tlb_kernel_range - * are best implemented as tlbia vs specific tlbie's */ - -#define __tlbia() _tlbia() - -static inline void flush_tlb_mm(struct mm_struct *mm) - { __tlbia(); } -static inline void flush_tlb_page(struct vm_area_struct *vma, - unsigned long vmaddr) - { _tlbie(vmaddr); } -static inline void flush_tlb_page_nohash(struct vm_area_struct *vma, - unsigned long vmaddr) - { _tlbie(vmaddr); } -static inline void flush_tlb_range(struct vm_area_struct *vma, - unsigned long start, unsigned long end) - { __tlbia(); } -static inline void flush_tlb_kernel_range(unsigned long start, - unsigned long end) - { __tlbia(); } - -#elif defined(CONFIG_8xx) -#define __tlbia() asm volatile ("tlbia; sync" : : : "memory") - -static inline void flush_tlb_mm(struct mm_struct *mm) - { __tlbia(); } -static inline void flush_tlb_page(struct vm_area_struct *vma, - unsigned long vmaddr) - { _tlbie(vmaddr); } -static inline void flush_tlb_page_nohash(struct vm_area_struct *vma, - unsigned long vmaddr) - { _tlbie(vmaddr); } -static inline void flush_tlb_range(struct vm_area_struct *vma, - unsigned long start, unsigned long end) - { __tlbia(); } -static inline void flush_tlb_kernel_range(unsigned long start, - unsigned long end) - { __tlbia(); } - -#else /* 6xx, 7xx, 7xxx cpus */ -struct mm_struct; -struct vm_area_struct; -extern void flush_tlb_mm(struct mm_struct *mm); -extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr); -extern void flush_tlb_page_nohash(struct vm_area_struct *vma, unsigned long addr); -extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, - unsigned long end); -extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); -#endif - -/* - * This is called in munmap when we have freed up some page-table - * pages. We don't need to do anything here, there's nothing special - * about our page-table pages. -- paulus - */ -static inline void flush_tlb_pgtables(struct mm_struct *mm, - unsigned long start, unsigned long end) -{ -} - -/* - * This gets called at the end of handling a page fault, when - * the kernel has put a new PTE into the page table for the process. - * We use it to ensure coherency between the i-cache and d-cache - * for the page which has just been mapped in. - * On machines which use an MMU hash table, we use this to put a - * corresponding HPTE into the hash table ahead of time, instead of - * waiting for the inevitable extra hash-table miss exception. - */ -extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t); - -#endif /* _PPC_TLBFLUSH_H */ -#endif /*__KERNEL__ */ diff --git a/include/asm-ppc/types.h b/include/asm-ppc/types.h deleted file mode 100644 index 77dc24d7d2a..00000000000 --- a/include/asm-ppc/types.h +++ /dev/null @@ -1,69 +0,0 @@ -#ifndef _PPC_TYPES_H -#define _PPC_TYPES_H - -#ifndef __ASSEMBLY__ - -typedef __signed__ char __s8; -typedef unsigned char __u8; - -typedef __signed__ short __s16; -typedef unsigned short __u16; - -typedef __signed__ int __s32; -typedef unsigned int __u32; - -#if defined(__GNUC__) && !defined(__STRICT_ANSI__) -typedef __signed__ long long __s64; -typedef unsigned long long __u64; -#endif - -typedef struct { - __u32 u[4]; -} __vector128; - -/* - * XXX allowed outside of __KERNEL__ for now, until glibc gets - * a proper set of asm headers of its own. -- paulus - */ -typedef unsigned short umode_t; - -#endif /* __ASSEMBLY__ */ - -#ifdef __KERNEL__ -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -#define BITS_PER_LONG 32 - -#ifndef __ASSEMBLY__ - -#include <linux/config.h> - -typedef signed char s8; -typedef unsigned char u8; - -typedef signed short s16; -typedef unsigned short u16; - -typedef signed int s32; -typedef unsigned int u32; - -typedef signed long long s64; -typedef unsigned long long u64; - -typedef __vector128 vector128; - -/* DMA addresses are 32-bits wide */ -typedef u32 dma_addr_t; -typedef u64 dma64_addr_t; - -#ifdef CONFIG_LBD -typedef u64 sector_t; -#define HAVE_SECTOR_T -#endif - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -#endif diff --git a/include/asm-ppc/uaccess.h b/include/asm-ppc/uaccess.h deleted file mode 100644 index 63f56224da8..00000000000 --- a/include/asm-ppc/uaccess.h +++ /dev/null @@ -1,393 +0,0 @@ -#ifdef __KERNEL__ -#ifndef _PPC_UACCESS_H -#define _PPC_UACCESS_H - -#ifndef __ASSEMBLY__ -#include <linux/sched.h> -#include <linux/errno.h> -#include <asm/processor.h> - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -/* - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons, these macros are grossly misnamed. - * - * The fs/ds values are now the highest legal address in the "segment". - * This simplifies the checking in the routines below. - */ - -#define KERNEL_DS ((mm_segment_t) { ~0UL }) -#define USER_DS ((mm_segment_t) { TASK_SIZE - 1 }) - -#define get_ds() (KERNEL_DS) -#define get_fs() (current->thread.fs) -#define set_fs(val) (current->thread.fs = (val)) - -#define segment_eq(a,b) ((a).seg == (b).seg) - -#define __access_ok(addr,size) \ - ((addr) <= current->thread.fs.seg \ - && ((size) == 0 || (size) - 1 <= current->thread.fs.seg - (addr))) - -#define access_ok(type, addr, size) \ - (__chk_user_ptr(addr),__access_ok((unsigned long)(addr),(size))) - -/* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. - * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. - */ - -struct exception_table_entry -{ - unsigned long insn, fixup; -}; - -/* - * These are the main single-value transfer routines. They automatically - * use the right size if we just have the right pointer type. - * - * This gets kind of ugly. We want to return _two_ values in "get_user()" - * and yet we don't want to do any pointers, because that is too much - * of a performance impact. Thus we have a few rather ugly macros here, - * and hide all the ugliness from the user. - * - * The "__xxx" versions of the user access functions are versions that - * do not verify the address space, that must have been done previously - * with a separate "access_ok()" call (this is used when we do multiple - * accesses to the same area of user memory). - * - * As we use the same address space for kernel and user data on the - * PowerPC, we can just do these as direct assignments. (Of course, the - * exception handling means that it's no longer "just"...) - * - * The "user64" versions of the user access functions are versions that - * allow access of 64-bit data. The "get_user" functions do not - * properly handle 64-bit data because the value gets down cast to a long. - * The "put_user" functions already handle 64-bit data properly but we add - * "user64" versions for completeness - */ -#define get_user(x,ptr) \ - __get_user_check((x),(ptr),sizeof(*(ptr))) -#define get_user64(x,ptr) \ - __get_user64_check((x),(ptr),sizeof(*(ptr))) -#define put_user(x,ptr) \ - __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr))) -#define put_user64(x,ptr) put_user(x,ptr) - -#define __get_user(x,ptr) \ - __get_user_nocheck((x),(ptr),sizeof(*(ptr))) -#define __get_user64(x,ptr) \ - __get_user64_nocheck((x),(ptr),sizeof(*(ptr))) -#define __put_user(x,ptr) \ - __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr))) -#define __put_user64(x,ptr) __put_user(x,ptr) - -extern long __put_user_bad(void); - -#define __put_user_nocheck(x,ptr,size) \ -({ \ - long __pu_err; \ - __chk_user_ptr(ptr); \ - __put_user_size((x),(ptr),(size),__pu_err); \ - __pu_err; \ -}) - -#define __put_user_check(x,ptr,size) \ -({ \ - long __pu_err = -EFAULT; \ - __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ - if (access_ok(VERIFY_WRITE,__pu_addr,size)) \ - __put_user_size((x),__pu_addr,(size),__pu_err); \ - __pu_err; \ -}) - -#define __put_user_size(x,ptr,size,retval) \ -do { \ - retval = 0; \ - switch (size) { \ - case 1: \ - __put_user_asm(x, ptr, retval, "stb"); \ - break; \ - case 2: \ - __put_user_asm(x, ptr, retval, "sth"); \ - break; \ - case 4: \ - __put_user_asm(x, ptr, retval, "stw"); \ - break; \ - case 8: \ - __put_user_asm2(x, ptr, retval); \ - break; \ - default: \ - __put_user_bad(); \ - } \ -} while (0) - -/* - * We don't tell gcc that we are accessing memory, but this is OK - * because we do not write to any memory gcc knows about, so there - * are no aliasing issues. - */ -#define __put_user_asm(x, addr, err, op) \ - __asm__ __volatile__( \ - "1: "op" %1,0(%2)\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3: li %0,%3\n" \ - " b 2b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .align 2\n" \ - " .long 1b,3b\n" \ - ".previous" \ - : "=r" (err) \ - : "r" (x), "b" (addr), "i" (-EFAULT), "0" (err)) - -#define __put_user_asm2(x, addr, err) \ - __asm__ __volatile__( \ - "1: stw %1,0(%2)\n" \ - "2: stw %1+1,4(%2)\n" \ - "3:\n" \ - ".section .fixup,\"ax\"\n" \ - "4: li %0,%3\n" \ - " b 3b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .align 2\n" \ - " .long 1b,4b\n" \ - " .long 2b,4b\n" \ - ".previous" \ - : "=r" (err) \ - : "r" (x), "b" (addr), "i" (-EFAULT), "0" (err)) - -#define __get_user_nocheck(x, ptr, size) \ -({ \ - long __gu_err; \ - unsigned long __gu_val; \ - __chk_user_ptr(ptr); \ - __get_user_size(__gu_val, (ptr), (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#define __get_user64_nocheck(x, ptr, size) \ -({ \ - long __gu_err; \ - long long __gu_val; \ - __chk_user_ptr(ptr); \ - __get_user_size64(__gu_val, (ptr), (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#define __get_user_check(x, ptr, size) \ -({ \ - long __gu_err = -EFAULT; \ - unsigned long __gu_val = 0; \ - const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ - if (access_ok(VERIFY_READ, __gu_addr, (size))) \ - __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#define __get_user64_check(x, ptr, size) \ -({ \ - long __gu_err = -EFAULT; \ - long long __gu_val = 0; \ - const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ - if (access_ok(VERIFY_READ, __gu_addr, (size))) \ - __get_user_size64(__gu_val, __gu_addr, (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -extern long __get_user_bad(void); - -#define __get_user_size(x, ptr, size, retval) \ -do { \ - retval = 0; \ - switch (size) { \ - case 1: \ - __get_user_asm(x, ptr, retval, "lbz"); \ - break; \ - case 2: \ - __get_user_asm(x, ptr, retval, "lhz"); \ - break; \ - case 4: \ - __get_user_asm(x, ptr, retval, "lwz"); \ - break; \ - default: \ - x = __get_user_bad(); \ - } \ -} while (0) - -#define __get_user_size64(x, ptr, size, retval) \ -do { \ - retval = 0; \ - switch (size) { \ - case 1: \ - __get_user_asm(x, ptr, retval, "lbz"); \ - break; \ - case 2: \ - __get_user_asm(x, ptr, retval, "lhz"); \ - break; \ - case 4: \ - __get_user_asm(x, ptr, retval, "lwz"); \ - break; \ - case 8: \ - __get_user_asm2(x, ptr, retval); \ - break; \ - default: \ - x = __get_user_bad(); \ - } \ -} while (0) - -#define __get_user_asm(x, addr, err, op) \ - __asm__ __volatile__( \ - "1: "op" %1,0(%2)\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3: li %0,%3\n" \ - " li %1,0\n" \ - " b 2b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .align 2\n" \ - " .long 1b,3b\n" \ - ".previous" \ - : "=r"(err), "=r"(x) \ - : "b"(addr), "i"(-EFAULT), "0"(err)) - -#define __get_user_asm2(x, addr, err) \ - __asm__ __volatile__( \ - "1: lwz %1,0(%2)\n" \ - "2: lwz %1+1,4(%2)\n" \ - "3:\n" \ - ".section .fixup,\"ax\"\n" \ - "4: li %0,%3\n" \ - " li %1,0\n" \ - " li %1+1,0\n" \ - " b 3b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .align 2\n" \ - " .long 1b,4b\n" \ - " .long 2b,4b\n" \ - ".previous" \ - : "=r"(err), "=&r"(x) \ - : "b"(addr), "i"(-EFAULT), "0"(err)) - -/* more complex routines */ - -extern int __copy_tofrom_user(void __user *to, const void __user *from, - unsigned long size); - -extern inline unsigned long -copy_from_user(void *to, const void __user *from, unsigned long n) -{ - unsigned long over; - - if (access_ok(VERIFY_READ, from, n)) - return __copy_tofrom_user((__force void __user *)to, from, n); - if ((unsigned long)from < TASK_SIZE) { - over = (unsigned long)from + n - TASK_SIZE; - return __copy_tofrom_user((__force void __user *)to, from, n - over) + over; - } - return n; -} - -extern inline unsigned long -copy_to_user(void __user *to, const void *from, unsigned long n) -{ - unsigned long over; - - if (access_ok(VERIFY_WRITE, to, n)) - return __copy_tofrom_user(to, (__force void __user *) from, n); - if ((unsigned long)to < TASK_SIZE) { - over = (unsigned long)to + n - TASK_SIZE; - return __copy_tofrom_user(to, (__force void __user *) from, n - over) + over; - } - return n; -} - -static inline unsigned long __copy_from_user(void *to, const void __user *from, unsigned long size) -{ - return __copy_tofrom_user((__force void __user *)to, from, size); -} - -static inline unsigned long __copy_to_user(void __user *to, const void *from, unsigned long size) -{ - return __copy_tofrom_user(to, (__force void __user *)from, size); -} - -#define __copy_to_user_inatomic __copy_to_user -#define __copy_from_user_inatomic __copy_from_user - -extern unsigned long __clear_user(void __user *addr, unsigned long size); - -extern inline unsigned long -clear_user(void __user *addr, unsigned long size) -{ - if (access_ok(VERIFY_WRITE, addr, size)) - return __clear_user(addr, size); - if ((unsigned long)addr < TASK_SIZE) { - unsigned long over = (unsigned long)addr + size - TASK_SIZE; - return __clear_user(addr, size - over) + over; - } - return size; -} - -extern int __strncpy_from_user(char *dst, const char __user *src, long count); - -extern inline long -strncpy_from_user(char *dst, const char __user *src, long count) -{ - if (access_ok(VERIFY_READ, src, 1)) - return __strncpy_from_user(dst, src, count); - return -EFAULT; -} - -/* - * Return the size of a string (including the ending 0) - * - * Return 0 for error - */ - -extern int __strnlen_user(const char __user *str, long len, unsigned long top); - -/* - * Returns the length of the string at str (including the null byte), - * or 0 if we hit a page we can't access, - * or something > len if we didn't find a null byte. - * - * The `top' parameter to __strnlen_user is to make sure that - * we can never overflow from the user area into kernel space. - */ -extern __inline__ int strnlen_user(const char __user *str, long len) -{ - unsigned long top = current->thread.fs.seg; - - if ((unsigned long)str > top) - return 0; - return __strnlen_user(str, len, top); -} - -#define strlen_user(str) strnlen_user((str), 0x7ffffffe) - -#endif /* __ASSEMBLY__ */ - -#endif /* _PPC_UACCESS_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/ucontext.h b/include/asm-ppc/ucontext.h deleted file mode 100644 index 664bc984d51..00000000000 --- a/include/asm-ppc/ucontext.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef _ASMPPC_UCONTEXT_H -#define _ASMPPC_UCONTEXT_H - -#include <asm/elf.h> -#include <asm/signal.h> - -struct mcontext { - elf_gregset_t mc_gregs; - elf_fpregset_t mc_fregs; - unsigned long mc_pad[2]; - elf_vrregset_t mc_vregs __attribute__((__aligned__(16))); -}; - -struct ucontext { - unsigned long uc_flags; - struct ucontext __user *uc_link; - stack_t uc_stack; - int uc_pad[7]; - struct mcontext __user *uc_regs;/* points to uc_mcontext field */ - sigset_t uc_sigmask; - /* glibc has 1024-bit signal masks, ours are 64-bit */ - int uc_maskext[30]; - int uc_pad2[3]; - struct mcontext uc_mcontext; -}; - -#endif /* !_ASMPPC_UCONTEXT_H */ diff --git a/include/asm-ppc/uninorth.h b/include/asm-ppc/uninorth.h deleted file mode 100644 index f737732c386..00000000000 --- a/include/asm-ppc/uninorth.h +++ /dev/null @@ -1,229 +0,0 @@ -/* - * uninorth.h: definitions for using the "UniNorth" host bridge chip - * from Apple. This chip is used on "Core99" machines - * This also includes U2 used on more recent MacRISC2/3 - * machines and U3 (G5) - * - */ -#ifdef __KERNEL__ -#ifndef __ASM_UNINORTH_H__ -#define __ASM_UNINORTH_H__ - -/* - * Uni-N and U3 config space reg. definitions - * - * (Little endian) - */ - -/* Address ranges selection. This one should work with Bandit too */ -/* Not U3 */ -#define UNI_N_ADDR_SELECT 0x48 -#define UNI_N_ADDR_COARSE_MASK 0xffff0000 /* 256Mb regions at *0000000 */ -#define UNI_N_ADDR_FINE_MASK 0x0000ffff /* 16Mb regions at f*000000 */ - -/* AGP registers */ -/* Not U3 */ -#define UNI_N_CFG_GART_BASE 0x8c -#define UNI_N_CFG_AGP_BASE 0x90 -#define UNI_N_CFG_GART_CTRL 0x94 -#define UNI_N_CFG_INTERNAL_STATUS 0x98 -#define UNI_N_CFG_GART_DUMMY_PAGE 0xa4 - -/* UNI_N_CFG_GART_CTRL bits definitions */ -#define UNI_N_CFG_GART_INVAL 0x00000001 -#define UNI_N_CFG_GART_ENABLE 0x00000100 -#define UNI_N_CFG_GART_2xRESET 0x00010000 -#define UNI_N_CFG_GART_DISSBADET 0x00020000 -/* The following seems to only be used only on U3 <j.glisse@gmail.com> */ -#define U3_N_CFG_GART_SYNCMODE 0x00040000 -#define U3_N_CFG_GART_PERFRD 0x00080000 -#define U3_N_CFG_GART_B2BGNT 0x00200000 -#define U3_N_CFG_GART_FASTDDR 0x00400000 - -/* My understanding of UniNorth AGP as of UniNorth rev 1.0x, - * revision 1.5 (x4 AGP) may need further changes. - * - * AGP_BASE register contains the base address of the AGP aperture on - * the AGP bus. It doesn't seem to be visible to the CPU as of UniNorth 1.x, - * even if decoding of this address range is enabled in the address select - * register. Apparently, the only supported bases are 256Mb multiples - * (high 4 bits of that register). - * - * GART_BASE register appear to contain the physical address of the GART - * in system memory in the high address bits (page aligned), and the - * GART size in the low order bits (number of GART pages) - * - * The GART format itself is one 32bits word per physical memory page. - * This word contains, in little-endian format (!!!), the physical address - * of the page in the high bits, and what appears to be an "enable" bit - * in the LSB bit (0) that must be set to 1 when the entry is valid. - * - * Obviously, the GART is not cache coherent and so any change to it - * must be flushed to memory (or maybe just make the GART space non - * cachable). AGP memory itself doens't seem to be cache coherent neither. - * - * In order to invalidate the GART (which is probably necessary to inval - * the bridge internal TLBs), the following sequence has to be written, - * in order, to the GART_CTRL register: - * - * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL - * UNI_N_CFG_GART_ENABLE - * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_2xRESET - * UNI_N_CFG_GART_ENABLE - * - * As far as AGP "features" are concerned, it looks like fast write may - * not be supported but this has to be confirmed. - * - * Turning on AGP seem to require a double invalidate operation, one before - * setting the AGP command register, on after. - * - * Turning off AGP seems to require the following sequence: first wait - * for the AGP to be idle by reading the internal status register, then - * write in that order to the GART_CTRL register: - * - * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL - * 0 - * UNI_N_CFG_GART_2xRESET - * 0 - */ - -/* - * Uni-N memory mapped reg. definitions - * - * Those registers are Big-Endian !! - * - * Their meaning come from either Darwin and/or from experiments I made with - * the bootrom, I'm not sure about their exact meaning yet - * - */ - -/* Version of the UniNorth chip */ -#define UNI_N_VERSION 0x0000 /* Known versions: 3,7 and 8 */ - -#define UNI_N_VERSION_107 0x0003 /* 1.0.7 */ -#define UNI_N_VERSION_10A 0x0007 /* 1.0.10 */ -#define UNI_N_VERSION_150 0x0011 /* 1.5 */ -#define UNI_N_VERSION_200 0x0024 /* 2.0 */ -#define UNI_N_VERSION_PANGEA 0x00C0 /* Integrated U1 + K */ -#define UNI_N_VERSION_INTREPID 0x00D2 /* Integrated U2 + K */ -#define UNI_N_VERSION_300 0x0030 /* 3.0 (U3 on G5) */ - -/* This register is used to enable/disable various clocks */ -#define UNI_N_CLOCK_CNTL 0x0020 -#define UNI_N_CLOCK_CNTL_PCI 0x00000001 /* PCI2 clock control */ -#define UNI_N_CLOCK_CNTL_GMAC 0x00000002 /* GMAC clock control */ -#define UNI_N_CLOCK_CNTL_FW 0x00000004 /* FireWire clock control */ -#define UNI_N_CLOCK_CNTL_ATA100 0x00000010 /* ATA-100 clock control (U2) */ - -/* Power Management control */ -#define UNI_N_POWER_MGT 0x0030 -#define UNI_N_POWER_MGT_NORMAL 0x00 -#define UNI_N_POWER_MGT_IDLE2 0x01 -#define UNI_N_POWER_MGT_SLEEP 0x02 - -/* This register is configured by Darwin depending on the UniN - * revision - */ -#define UNI_N_ARB_CTRL 0x0040 -#define UNI_N_ARB_CTRL_QACK_DELAY_SHIFT 15 -#define UNI_N_ARB_CTRL_QACK_DELAY_MASK 0x0e1f8000 -#define UNI_N_ARB_CTRL_QACK_DELAY 0x30 -#define UNI_N_ARB_CTRL_QACK_DELAY105 0x00 - -/* This one _might_ return the CPU number of the CPU reading it; - * the bootROM decides whether to boot or to sleep/spinloop depending - * on this register beeing 0 or not - */ -#define UNI_N_CPU_NUMBER 0x0050 - -/* This register appear to be read by the bootROM to decide what - * to do on a non-recoverable reset (powerup or wakeup) - */ -#define UNI_N_HWINIT_STATE 0x0070 -#define UNI_N_HWINIT_STATE_SLEEPING 0x01 -#define UNI_N_HWINIT_STATE_RUNNING 0x02 -/* This last bit appear to be used by the bootROM to know the second - * CPU has started and will enter it's sleep loop with IP=0 - */ -#define UNI_N_HWINIT_STATE_CPU1_FLAG 0x10000000 - -/* This register controls AACK delay, which is set when 2004 iBook/PowerBook - * is in low speed mode. - */ -#define UNI_N_AACK_DELAY 0x0100 -#define UNI_N_AACK_DELAY_ENABLE 0x00000001 - -/* Clock status for Intrepid */ -#define UNI_N_CLOCK_STOP_STATUS0 0x0150 -#define UNI_N_CLOCK_STOPPED_EXTAGP 0x00200000 -#define UNI_N_CLOCK_STOPPED_AGPDEL 0x00100000 -#define UNI_N_CLOCK_STOPPED_I2S0_45_49 0x00080000 -#define UNI_N_CLOCK_STOPPED_I2S0_18 0x00040000 -#define UNI_N_CLOCK_STOPPED_I2S1_45_49 0x00020000 -#define UNI_N_CLOCK_STOPPED_I2S1_18 0x00010000 -#define UNI_N_CLOCK_STOPPED_TIMER 0x00008000 -#define UNI_N_CLOCK_STOPPED_SCC_RTCLK18 0x00004000 -#define UNI_N_CLOCK_STOPPED_SCC_RTCLK32 0x00002000 -#define UNI_N_CLOCK_STOPPED_SCC_VIA32 0x00001000 -#define UNI_N_CLOCK_STOPPED_SCC_SLOT0 0x00000800 -#define UNI_N_CLOCK_STOPPED_SCC_SLOT1 0x00000400 -#define UNI_N_CLOCK_STOPPED_SCC_SLOT2 0x00000200 -#define UNI_N_CLOCK_STOPPED_PCI_FBCLKO 0x00000100 -#define UNI_N_CLOCK_STOPPED_VEO0 0x00000080 -#define UNI_N_CLOCK_STOPPED_VEO1 0x00000040 -#define UNI_N_CLOCK_STOPPED_USB0 0x00000020 -#define UNI_N_CLOCK_STOPPED_USB1 0x00000010 -#define UNI_N_CLOCK_STOPPED_USB2 0x00000008 -#define UNI_N_CLOCK_STOPPED_32 0x00000004 -#define UNI_N_CLOCK_STOPPED_45 0x00000002 -#define UNI_N_CLOCK_STOPPED_49 0x00000001 - -#define UNI_N_CLOCK_STOP_STATUS1 0x0160 -#define UNI_N_CLOCK_STOPPED_PLL4REF 0x00080000 -#define UNI_N_CLOCK_STOPPED_CPUDEL 0x00040000 -#define UNI_N_CLOCK_STOPPED_CPU 0x00020000 -#define UNI_N_CLOCK_STOPPED_BUF_REFCKO 0x00010000 -#define UNI_N_CLOCK_STOPPED_PCI2 0x00008000 -#define UNI_N_CLOCK_STOPPED_FW 0x00004000 -#define UNI_N_CLOCK_STOPPED_GB 0x00002000 -#define UNI_N_CLOCK_STOPPED_ATA66 0x00001000 -#define UNI_N_CLOCK_STOPPED_ATA100 0x00000800 -#define UNI_N_CLOCK_STOPPED_MAX 0x00000400 -#define UNI_N_CLOCK_STOPPED_PCI1 0x00000200 -#define UNI_N_CLOCK_STOPPED_KLPCI 0x00000100 -#define UNI_N_CLOCK_STOPPED_USB0PCI 0x00000080 -#define UNI_N_CLOCK_STOPPED_USB1PCI 0x00000040 -#define UNI_N_CLOCK_STOPPED_USB2PCI 0x00000020 -#define UNI_N_CLOCK_STOPPED_7PCI1 0x00000008 -#define UNI_N_CLOCK_STOPPED_AGP 0x00000004 -#define UNI_N_CLOCK_STOPPED_PCI0 0x00000002 -#define UNI_N_CLOCK_STOPPED_18 0x00000001 - -/* Intrepid registe to OF do-platform-clockspreading */ -#define UNI_N_CLOCK_SPREADING 0x190 - -/* Uninorth 1.5 rev. has additional perf. monitor registers at 0xf00-0xf50 */ - - -/* - * U3 specific registers - */ - - -/* U3 Toggle */ -#define U3_TOGGLE_REG 0x00e0 -#define U3_PMC_START_STOP 0x0001 -#define U3_MPIC_RESET 0x0002 -#define U3_MPIC_OUTPUT_ENABLE 0x0004 - -/* U3 API PHY Config 1 */ -#define U3_API_PHY_CONFIG_1 0x23030 - -/* U3 HyperTransport registers */ -#define U3_HT_CONFIG_BASE 0x70000 -#define U3_HT_LINK_COMMAND 0x100 -#define U3_HT_LINK_CONFIG 0x110 -#define U3_HT_LINK_FREQ 0x120 - -#endif /* __ASM_UNINORTH_H__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/unistd.h b/include/asm-ppc/unistd.h deleted file mode 100644 index 3173ab3d2eb..00000000000 --- a/include/asm-ppc/unistd.h +++ /dev/null @@ -1,493 +0,0 @@ -#ifndef _ASM_PPC_UNISTD_H_ -#define _ASM_PPC_UNISTD_H_ - -/* - * This file contains the system call numbers. - */ -#define __NR_restart_syscall 0 -#define __NR_exit 1 -#define __NR_fork 2 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 -#define __NR_waitpid 7 -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_time 13 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_lchown 16 -#define __NR_break 17 -#define __NR_oldstat 18 -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 -#define __NR_umount 22 -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_stime 25 -#define __NR_ptrace 26 -#define __NR_alarm 27 -#define __NR_oldfstat 28 -#define __NR_pause 29 -#define __NR_utime 30 -#define __NR_stty 31 -#define __NR_gtty 32 -#define __NR_access 33 -#define __NR_nice 34 -#define __NR_ftime 35 -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 -#define __NR_prof 44 -#define __NR_brk 45 -#define __NR_setgid 46 -#define __NR_getgid 47 -#define __NR_signal 48 -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_acct 51 -#define __NR_umount2 52 -#define __NR_lock 53 -#define __NR_ioctl 54 -#define __NR_fcntl 55 -#define __NR_mpx 56 -#define __NR_setpgid 57 -#define __NR_ulimit 58 -#define __NR_oldolduname 59 -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_getpgrp 65 -#define __NR_setsid 66 -#define __NR_sigaction 67 -#define __NR_sgetmask 68 -#define __NR_ssetmask 69 -#define __NR_setreuid 70 -#define __NR_setregid 71 -#define __NR_sigsuspend 72 -#define __NR_sigpending 73 -#define __NR_sethostname 74 -#define __NR_setrlimit 75 -#define __NR_getrlimit 76 -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_getgroups 80 -#define __NR_setgroups 81 -#define __NR_select 82 -#define __NR_symlink 83 -#define __NR_oldlstat 84 -#define __NR_readlink 85 -#define __NR_uselib 86 -#define __NR_swapon 87 -#define __NR_reboot 88 -#define __NR_readdir 89 -#define __NR_mmap 90 -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_fchown 95 -#define __NR_getpriority 96 -#define __NR_setpriority 97 -#define __NR_profil 98 -#define __NR_statfs 99 -#define __NR_fstatfs 100 -#define __NR_ioperm 101 -#define __NR_socketcall 102 -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 -#define __NR_olduname 109 -#define __NR_iopl 110 -#define __NR_vhangup 111 -#define __NR_idle 112 -#define __NR_vm86 113 -#define __NR_wait4 114 -#define __NR_swapoff 115 -#define __NR_sysinfo 116 -#define __NR_ipc 117 -#define __NR_fsync 118 -#define __NR_sigreturn 119 -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 -#define __NR_modify_ldt 123 -#define __NR_adjtimex 124 -#define __NR_mprotect 125 -#define __NR_sigprocmask 126 -#define __NR_create_module 127 -#define __NR_init_module 128 -#define __NR_delete_module 129 -#define __NR_get_kernel_syms 130 -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 -#define __NR_sysfs 135 -#define __NR_personality 136 -#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ -#define __NR_setfsuid 138 -#define __NR_setfsgid 139 -#define __NR__llseek 140 -#define __NR_getdents 141 -#define __NR__newselect 142 -#define __NR_flock 143 -#define __NR_msync 144 -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_getsid 147 -#define __NR_fdatasync 148 -#define __NR__sysctl 149 -#define __NR_mlock 150 -#define __NR_munlock 151 -#define __NR_mlockall 152 -#define __NR_munlockall 153 -#define __NR_sched_setparam 154 -#define __NR_sched_getparam 155 -#define __NR_sched_setscheduler 156 -#define __NR_sched_getscheduler 157 -#define __NR_sched_yield 158 -#define __NR_sched_get_priority_max 159 -#define __NR_sched_get_priority_min 160 -#define __NR_sched_rr_get_interval 161 -#define __NR_nanosleep 162 -#define __NR_mremap 163 -#define __NR_setresuid 164 -#define __NR_getresuid 165 -#define __NR_query_module 166 -#define __NR_poll 167 -#define __NR_nfsservctl 168 -#define __NR_setresgid 169 -#define __NR_getresgid 170 -#define __NR_prctl 171 -#define __NR_rt_sigreturn 172 -#define __NR_rt_sigaction 173 -#define __NR_rt_sigprocmask 174 -#define __NR_rt_sigpending 175 -#define __NR_rt_sigtimedwait 176 -#define __NR_rt_sigqueueinfo 177 -#define __NR_rt_sigsuspend 178 -#define __NR_pread64 179 -#define __NR_pwrite64 180 -#define __NR_chown 181 -#define __NR_getcwd 182 -#define __NR_capget 183 -#define __NR_capset 184 -#define __NR_sigaltstack 185 -#define __NR_sendfile 186 -#define __NR_getpmsg 187 /* some people actually want streams */ -#define __NR_putpmsg 188 /* some people actually want streams */ -#define __NR_vfork 189 -#define __NR_ugetrlimit 190 /* SuS compliant getrlimit */ -#define __NR_readahead 191 -#define __NR_mmap2 192 -#define __NR_truncate64 193 -#define __NR_ftruncate64 194 -#define __NR_stat64 195 -#define __NR_lstat64 196 -#define __NR_fstat64 197 -#define __NR_pciconfig_read 198 -#define __NR_pciconfig_write 199 -#define __NR_pciconfig_iobase 200 -#define __NR_multiplexer 201 -#define __NR_getdents64 202 -#define __NR_pivot_root 203 -#define __NR_fcntl64 204 -#define __NR_madvise 205 -#define __NR_mincore 206 -#define __NR_gettid 207 -#define __NR_tkill 208 -#define __NR_setxattr 209 -#define __NR_lsetxattr 210 -#define __NR_fsetxattr 211 -#define __NR_getxattr 212 -#define __NR_lgetxattr 213 -#define __NR_fgetxattr 214 -#define __NR_listxattr 215 -#define __NR_llistxattr 216 -#define __NR_flistxattr 217 -#define __NR_removexattr 218 -#define __NR_lremovexattr 219 -#define __NR_fremovexattr 220 -#define __NR_futex 221 -#define __NR_sched_setaffinity 222 -#define __NR_sched_getaffinity 223 -/* 224 currently unused */ -#define __NR_tuxcall 225 -#define __NR_sendfile64 226 -#define __NR_io_setup 227 -#define __NR_io_destroy 228 -#define __NR_io_getevents 229 -#define __NR_io_submit 230 -#define __NR_io_cancel 231 -#define __NR_set_tid_address 232 -#define __NR_fadvise64 233 -#define __NR_exit_group 234 -#define __NR_lookup_dcookie 235 -#define __NR_epoll_create 236 -#define __NR_epoll_ctl 237 -#define __NR_epoll_wait 238 -#define __NR_remap_file_pages 239 -#define __NR_timer_create 240 -#define __NR_timer_settime 241 -#define __NR_timer_gettime 242 -#define __NR_timer_getoverrun 243 -#define __NR_timer_delete 244 -#define __NR_clock_settime 245 -#define __NR_clock_gettime 246 -#define __NR_clock_getres 247 -#define __NR_clock_nanosleep 248 -#define __NR_swapcontext 249 -#define __NR_tgkill 250 -#define __NR_utimes 251 -#define __NR_statfs64 252 -#define __NR_fstatfs64 253 -#define __NR_fadvise64_64 254 -#define __NR_rtas 255 -#define __NR_sys_debug_setcontext 256 -/* Number 257 is reserved for vserver */ -/* 258 currently unused */ -/* Number 259 is reserved for new sys_mbind */ -/* Number 260 is reserved for new sys_get_mempolicy */ -/* Number 261 is reserved for new sys_set_mempolicy */ -#define __NR_mq_open 262 -#define __NR_mq_unlink 263 -#define __NR_mq_timedsend 264 -#define __NR_mq_timedreceive 265 -#define __NR_mq_notify 266 -#define __NR_mq_getsetattr 267 -#define __NR_kexec_load 268 -#define __NR_add_key 269 -#define __NR_request_key 270 -#define __NR_keyctl 271 -#define __NR_waitid 272 -#define __NR_ioprio_set 273 -#define __NR_ioprio_get 274 -#define __NR_inotify_init 275 -#define __NR_inotify_add_watch 276 -#define __NR_inotify_rm_watch 277 - -#define __NR_syscalls 278 - -#define __NR(n) #n - -/* On powerpc a system call basically clobbers the same registers like a - * function call, with the exception of LR (which is needed for the - * "sc; bnslr" sequence) and CR (where only CR0.SO is clobbered to signal - * an error return status). - */ - -#define __syscall_nr(nr, type, name, args...) \ - unsigned long __sc_ret, __sc_err; \ - { \ - register unsigned long __sc_0 __asm__ ("r0"); \ - register unsigned long __sc_3 __asm__ ("r3"); \ - register unsigned long __sc_4 __asm__ ("r4"); \ - register unsigned long __sc_5 __asm__ ("r5"); \ - register unsigned long __sc_6 __asm__ ("r6"); \ - register unsigned long __sc_7 __asm__ ("r7"); \ - register unsigned long __sc_8 __asm__ ("r8"); \ - \ - __sc_loadargs_##nr(name, args); \ - __asm__ __volatile__ \ - ("sc \n\t" \ - "mfcr %0 " \ - : "=&r" (__sc_0), \ - "=&r" (__sc_3), "=&r" (__sc_4), \ - "=&r" (__sc_5), "=&r" (__sc_6), \ - "=&r" (__sc_7), "=&r" (__sc_8) \ - : __sc_asm_input_##nr \ - : "cr0", "ctr", "memory", \ - "r9", "r10","r11", "r12"); \ - __sc_ret = __sc_3; \ - __sc_err = __sc_0; \ - } \ - if (__sc_err & 0x10000000) \ - { \ - errno = __sc_ret; \ - __sc_ret = -1; \ - } \ - return (type) __sc_ret - -#define __sc_loadargs_0(name, dummy...) \ - __sc_0 = __NR_##name -#define __sc_loadargs_1(name, arg1) \ - __sc_loadargs_0(name); \ - __sc_3 = (unsigned long) (arg1) -#define __sc_loadargs_2(name, arg1, arg2) \ - __sc_loadargs_1(name, arg1); \ - __sc_4 = (unsigned long) (arg2) -#define __sc_loadargs_3(name, arg1, arg2, arg3) \ - __sc_loadargs_2(name, arg1, arg2); \ - __sc_5 = (unsigned long) (arg3) -#define __sc_loadargs_4(name, arg1, arg2, arg3, arg4) \ - __sc_loadargs_3(name, arg1, arg2, arg3); \ - __sc_6 = (unsigned long) (arg4) -#define __sc_loadargs_5(name, arg1, arg2, arg3, arg4, arg5) \ - __sc_loadargs_4(name, arg1, arg2, arg3, arg4); \ - __sc_7 = (unsigned long) (arg5) -#define __sc_loadargs_6(name, arg1, arg2, arg3, arg4, arg5, arg6) \ - __sc_loadargs_5(name, arg1, arg2, arg3, arg4, arg5); \ - __sc_8 = (unsigned long) (arg6) - -#define __sc_asm_input_0 "0" (__sc_0) -#define __sc_asm_input_1 __sc_asm_input_0, "1" (__sc_3) -#define __sc_asm_input_2 __sc_asm_input_1, "2" (__sc_4) -#define __sc_asm_input_3 __sc_asm_input_2, "3" (__sc_5) -#define __sc_asm_input_4 __sc_asm_input_3, "4" (__sc_6) -#define __sc_asm_input_5 __sc_asm_input_4, "5" (__sc_7) -#define __sc_asm_input_6 __sc_asm_input_5, "6" (__sc_8) - -#define _syscall0(type,name) \ -type name(void) \ -{ \ - __syscall_nr(0, type, name); \ -} - -#define _syscall1(type,name,type1,arg1) \ -type name(type1 arg1) \ -{ \ - __syscall_nr(1, type, name, arg1); \ -} - -#define _syscall2(type,name,type1,arg1,type2,arg2) \ -type name(type1 arg1, type2 arg2) \ -{ \ - __syscall_nr(2, type, name, arg1, arg2); \ -} - -#define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3) \ -type name(type1 arg1, type2 arg2, type3 arg3) \ -{ \ - __syscall_nr(3, type, name, arg1, arg2, arg3); \ -} - -#define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \ -type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4) \ -{ \ - __syscall_nr(4, type, name, arg1, arg2, arg3, arg4); \ -} - -#define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4,type5,arg5) \ -type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5) \ -{ \ - __syscall_nr(5, type, name, arg1, arg2, arg3, arg4, arg5); \ -} - -#define _syscall6(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4,type5,arg5,type6,arg6) \ -type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5, type6 arg6) \ -{ \ - __syscall_nr(6, type, name, arg1, arg2, arg3, arg4, arg5, arg6); \ -} - -#ifdef __KERNEL__ - -#define __NR__exit __NR_exit -#define NR_syscalls __NR_syscalls - -#define __ARCH_WANT_IPC_PARSE_VERSION -#define __ARCH_WANT_OLD_READDIR -#define __ARCH_WANT_OLD_STAT -#define __ARCH_WANT_STAT64 -#define __ARCH_WANT_SYS_ALARM -#define __ARCH_WANT_SYS_GETHOSTNAME -#define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SGETMASK -#define __ARCH_WANT_SYS_SIGNAL -#define __ARCH_WANT_SYS_TIME -#define __ARCH_WANT_SYS_UTIME -#define __ARCH_WANT_SYS_WAITPID -#define __ARCH_WANT_SYS_SOCKETCALL -#define __ARCH_WANT_SYS_FADVISE64 -#define __ARCH_WANT_SYS_GETPGRP -#define __ARCH_WANT_SYS_LLSEEK -#define __ARCH_WANT_SYS_NICE -#define __ARCH_WANT_SYS_OLD_GETRLIMIT -#define __ARCH_WANT_SYS_OLDUMOUNT -#define __ARCH_WANT_SYS_SIGPENDING -#define __ARCH_WANT_SYS_SIGPROCMASK -#define __ARCH_WANT_SYS_RT_SIGACTION - -/* - * Forking from kernel space will result in the child getting a new, - * empty kernel stack area. Thus the child cannot access automatic - * variables set in the parent unless they are in registers, and the - * procedure where the fork was done cannot return to its caller in - * the child. - */ - -#ifdef __KERNEL_SYSCALLS__ - -#include <linux/compiler.h> -#include <linux/types.h> - -/* - * System call prototypes. - */ -extern pid_t setsid(void); -extern int write(int fd, const char *buf, off_t count); -extern int read(int fd, char *buf, off_t count); -extern off_t lseek(int fd, off_t offset, int count); -extern int dup(int fd); -extern int execve(const char *file, char **argv, char **envp); -extern int open(const char *file, int flag, int mode); -extern int close(int fd); -extern pid_t waitpid(pid_t pid, int *wait_stat, int options); - -unsigned long sys_mmap(unsigned long addr, size_t len, - unsigned long prot, unsigned long flags, - unsigned long fd, off_t offset); -unsigned long sys_mmap2(unsigned long addr, size_t len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff); -struct pt_regs; -int sys_execve(unsigned long a0, unsigned long a1, unsigned long a2, - unsigned long a3, unsigned long a4, unsigned long a5, - struct pt_regs *regs); -int sys_clone(unsigned long clone_flags, unsigned long usp, - int __user *parent_tidp, void __user *child_threadptr, - int __user *child_tidp, int p6, - struct pt_regs *regs); -int sys_fork(int p1, int p2, int p3, int p4, int p5, int p6, - struct pt_regs *regs); -int sys_vfork(int p1, int p2, int p3, int p4, int p5, int p6, - struct pt_regs *regs); -int sys_pipe(int __user *fildes); -int sys_ptrace(long request, long pid, long addr, long data); -struct sigaction; -long sys_rt_sigaction(int sig, - const struct sigaction __user *act, - struct sigaction __user *oact, - size_t sigsetsize); - -#endif /* __KERNEL_SYSCALLS__ */ - -/* - * "Conditional" syscalls - * - * What we want is __attribute__((weak,alias("sys_ni_syscall"))), - * but it doesn't work on all toolchains, so we just do it by hand - */ -#ifndef cond_syscall -#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") -#endif - -#endif /* __KERNEL__ */ - -#endif /* _ASM_PPC_UNISTD_H_ */ diff --git a/include/asm-ppc/vga.h b/include/asm-ppc/vga.h deleted file mode 100644 index c5864734e3e..00000000000 --- a/include/asm-ppc/vga.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * Access to VGA videoram - * - * (c) 1998 Martin Mares <mj@ucw.cz> - */ - -#ifdef __KERNEL__ -#ifndef _LINUX_ASM_VGA_H_ -#define _LINUX_ASM_VGA_H_ - -#include <asm/io.h> - -#include <linux/config.h> - -#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_MDA_CONSOLE) - -#define VT_BUF_HAVE_RW -/* - * These are only needed for supporting VGA or MDA text mode, which use little - * endian byte ordering. - * In other cases, we can optimize by using native byte ordering and - * <linux/vt_buffer.h> has already done the right job for us. - */ - -extern inline void scr_writew(u16 val, volatile u16 *addr) -{ - st_le16(addr, val); -} - -extern inline u16 scr_readw(volatile const u16 *addr) -{ - return ld_le16(addr); -} - -#define VT_BUF_HAVE_MEMCPYW -#define scr_memcpyw memcpy - -#endif /* !CONFIG_VGA_CONSOLE && !CONFIG_MDA_CONSOLE */ - -extern unsigned long vgacon_remap_base; -#define VGA_MAP_MEM(x) (x + vgacon_remap_base) -#define vga_readb(x) (*(x)) -#define vga_writeb(x,y) (*(y) = (x)) - -#endif -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/xmon.h b/include/asm-ppc/xmon.h deleted file mode 100644 index 042b83e6680..00000000000 --- a/include/asm-ppc/xmon.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef __PPC_XMON_H -#define __PPC_XMON_H -#ifdef __KERNEL__ - -struct pt_regs; - -extern void xmon(struct pt_regs *excp); -extern void xmon_printf(const char *fmt, ...); -extern void xmon_map_scc(void); -extern int xmon_bpt(struct pt_regs *regs); -extern int xmon_sstep(struct pt_regs *regs); -extern int xmon_iabr_match(struct pt_regs *regs); -extern int xmon_dabr_match(struct pt_regs *regs); -extern void (*xmon_fault_handler)(struct pt_regs *regs); - -#endif -#endif |