summaryrefslogtreecommitdiffstats
path: root/include/asm-sparc/envctrl.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-sparc/envctrl.h')
-rw-r--r--include/asm-sparc/envctrl.h103
1 files changed, 0 insertions, 103 deletions
diff --git a/include/asm-sparc/envctrl.h b/include/asm-sparc/envctrl.h
deleted file mode 100644
index 624fa7e2da8..00000000000
--- a/include/asm-sparc/envctrl.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- *
- * envctrl.h: Definitions for access to the i2c environment
- * monitoring on Ultrasparc systems.
- *
- * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be)
- * Copyright (C) 2000 Vinh Truong (vinh.truong@eng.sun.com)
- * VT - Add all ioctl commands and environment status definitions
- * VT - Add application note
- */
-#ifndef _SPARC64_ENVCTRL_H
-#define _SPARC64_ENVCTRL_H 1
-
-#include <linux/ioctl.h>
-
-/* Application note:
- *
- * The driver supports 4 operations: open(), close(), ioctl(), read()
- * The device name is /dev/envctrl.
- * Below is sample usage:
- *
- * fd = open("/dev/envtrl", O_RDONLY);
- * if (ioctl(fd, ENVCTRL_READ_SHUTDOWN_TEMPERATURE, 0) < 0)
- * printf("error\n");
- * ret = read(fd, buf, 10);
- * close(fd);
- *
- * Notice in the case of cpu voltage and temperature, the default is
- * cpu0. If we need to know the info of cpu1, cpu2, cpu3, we need to
- * pass in cpu number in ioctl() last parameter. For example, to
- * get the voltage of cpu2:
- *
- * ioctlbuf[0] = 2;
- * if (ioctl(fd, ENVCTRL_READ_CPU_VOLTAGE, ioctlbuf) < 0)
- * printf("error\n");
- * ret = read(fd, buf, 10);
- *
- * All the return values are in ascii. So check read return value
- * and do appropriate conversions in your application.
- */
-
-/* IOCTL commands */
-
-/* Note: these commands reflect possible monitor features.
- * Some boards choose to support some of the features only.
- */
-#define ENVCTRL_RD_CPU_TEMPERATURE _IOR('p', 0x40, int)
-#define ENVCTRL_RD_CPU_VOLTAGE _IOR('p', 0x41, int)
-#define ENVCTRL_RD_FAN_STATUS _IOR('p', 0x42, int)
-#define ENVCTRL_RD_WARNING_TEMPERATURE _IOR('p', 0x43, int)
-#define ENVCTRL_RD_SHUTDOWN_TEMPERATURE _IOR('p', 0x44, int)
-#define ENVCTRL_RD_VOLTAGE_STATUS _IOR('p', 0x45, int)
-#define ENVCTRL_RD_SCSI_TEMPERATURE _IOR('p', 0x46, int)
-#define ENVCTRL_RD_ETHERNET_TEMPERATURE _IOR('p', 0x47, int)
-#define ENVCTRL_RD_MTHRBD_TEMPERATURE _IOR('p', 0x48, int)
-
-#define ENVCTRL_RD_GLOBALADDRESS _IOR('p', 0x49, int)
-
-/* Read return values for a voltage status request. */
-#define ENVCTRL_VOLTAGE_POWERSUPPLY_GOOD 0x01
-#define ENVCTRL_VOLTAGE_BAD 0x02
-#define ENVCTRL_POWERSUPPLY_BAD 0x03
-#define ENVCTRL_VOLTAGE_POWERSUPPLY_BAD 0x04
-
-/* Read return values for a fan status request.
- * A failure match means either the fan fails or
- * the fan is not connected. Some boards have optional
- * connectors to connect extra fans.
- *
- * There are maximum 8 monitor fans. Some are cpu fans
- * some are system fans. The mask below only indicates
- * fan by order number.
- * Below is a sample application:
- *
- * if (ioctl(fd, ENVCTRL_READ_FAN_STATUS, 0) < 0) {
- * printf("ioctl fan failed\n");
- * }
- * if (read(fd, rslt, 1) <= 0) {
- * printf("error or fan not monitored\n");
- * } else {
- * if (rslt[0] == ENVCTRL_ALL_FANS_GOOD) {
- * printf("all fans good\n");
- * } else if (rslt[0] == ENVCTRL_ALL_FANS_BAD) {
- * printf("all fans bad\n");
- * } else {
- * if (rslt[0] & ENVCTRL_FAN0_FAILURE_MASK) {
- * printf("fan 0 failed or not connected\n");
- * }
- * ......
- */
-
-#define ENVCTRL_ALL_FANS_GOOD 0x00
-#define ENVCTRL_FAN0_FAILURE_MASK 0x01
-#define ENVCTRL_FAN1_FAILURE_MASK 0x02
-#define ENVCTRL_FAN2_FAILURE_MASK 0x04
-#define ENVCTRL_FAN3_FAILURE_MASK 0x08
-#define ENVCTRL_FAN4_FAILURE_MASK 0x10
-#define ENVCTRL_FAN5_FAILURE_MASK 0x20
-#define ENVCTRL_FAN6_FAILURE_MASK 0x40
-#define ENVCTRL_FAN7_FAILURE_MASK 0x80
-#define ENVCTRL_ALL_FANS_BAD 0xFF
-
-#endif /* !(_SPARC64_ENVCTRL_H) */