summaryrefslogtreecommitdiffstats
path: root/include/asm-sparc/sbus.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-sparc/sbus.h')
-rw-r--r--include/asm-sparc/sbus.h161
1 files changed, 8 insertions, 153 deletions
diff --git a/include/asm-sparc/sbus.h b/include/asm-sparc/sbus.h
index f1d2fe1c9a3..8f29a197966 100644
--- a/include/asm-sparc/sbus.h
+++ b/include/asm-sparc/sbus.h
@@ -1,153 +1,8 @@
-/*
- * sbus.h: Defines for the Sun SBus.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC_SBUS_H
-#define _SPARC_SBUS_H
-
-#include <linux/dma-mapping.h>
-#include <linux/ioport.h>
-
-#include <asm/oplib.h>
-#include <asm/prom.h>
-#include <asm/of_device.h>
-#include <asm/scatterlist.h>
-
-/* We scan which devices are on the SBus using the PROM node device
- * tree. SBus devices are described in two different ways. You can
- * either get an absolute address at which to access the device, or
- * you can get a SBus 'slot' number and an offset within that slot.
- */
-
-/* The base address at which to calculate device OBIO addresses. */
-#define SUN_SBUS_BVADDR 0xf8000000
-#define SBUS_OFF_MASK 0x01ffffff
-
-/* These routines are used to calculate device address from slot
- * numbers + offsets, and vice versa.
- */
-
-static inline unsigned long sbus_devaddr(int slotnum, unsigned long offset)
-{
- return (unsigned long) (SUN_SBUS_BVADDR+((slotnum)<<25)+(offset));
-}
-
-static inline int sbus_dev_slot(unsigned long dev_addr)
-{
- return (int) (((dev_addr)-SUN_SBUS_BVADDR)>>25);
-}
-
-struct sbus_bus;
-
-/* Linux SBUS device tables */
-struct sbus_dev {
- struct of_device ofdev;
- struct sbus_bus *bus;
- struct sbus_dev *next;
- struct sbus_dev *child;
- struct sbus_dev *parent;
- int prom_node;
- char prom_name[64];
- int slot;
-
- struct resource resource[PROMREG_MAX];
-
- struct linux_prom_registers reg_addrs[PROMREG_MAX];
- int num_registers;
-
- struct linux_prom_ranges device_ranges[PROMREG_MAX];
- int num_device_ranges;
-
- unsigned int irqs[4];
- int num_irqs;
-};
-#define to_sbus_device(d) container_of(d, struct sbus_dev, ofdev.dev)
-
-/* This struct describes the SBus(s) found on this machine. */
-struct sbus_bus {
- struct of_device ofdev;
- struct sbus_dev *devices; /* Link to devices on this SBus */
- struct sbus_bus *next; /* next SBus, if more than one SBus */
- int prom_node; /* PROM device tree node for this SBus */
- char prom_name[64]; /* Usually "sbus" or "sbi" */
- int clock_freq;
-
- struct linux_prom_ranges sbus_ranges[PROMREG_MAX];
- int num_sbus_ranges;
-
- int devid;
- int board;
-};
-#define to_sbus(d) container_of(d, struct sbus_bus, ofdev.dev)
-
-extern struct sbus_bus *sbus_root;
-
-static inline int
-sbus_is_slave(struct sbus_dev *dev)
-{
- /* XXX Have to write this for sun4c's */
- return 0;
-}
-
-/* Device probing routines could find these handy */
-#define for_each_sbus(bus) \
- for((bus) = sbus_root; (bus); (bus)=(bus)->next)
-
-#define for_each_sbusdev(device, bus) \
- for((device) = (bus)->devices; (device); (device)=(device)->next)
-
-#define for_all_sbusdev(device, bus) \
- for ((bus) = sbus_root; (bus); (bus) = (bus)->next) \
- for ((device) = (bus)->devices; (device); (device) = (device)->next)
-
-/* Driver DVMA interfaces. */
-#define sbus_can_dma_64bit(sdev) (0) /* actually, sparc_cpu_model==sun4d */
-#define sbus_can_burst64(sdev) (0) /* actually, sparc_cpu_model==sun4d */
-extern void sbus_set_sbus64(struct sbus_dev *, int);
-extern void sbus_fill_device_irq(struct sbus_dev *);
-
-/* These yield IOMMU mappings in consistent mode. */
-extern void *sbus_alloc_consistent(struct sbus_dev *, long, u32 *dma_addrp);
-extern void sbus_free_consistent(struct sbus_dev *, long, void *, u32);
-void prom_adjust_ranges(struct linux_prom_ranges *, int,
- struct linux_prom_ranges *, int);
-
-#define SBUS_DMA_BIDIRECTIONAL DMA_BIDIRECTIONAL
-#define SBUS_DMA_TODEVICE DMA_TO_DEVICE
-#define SBUS_DMA_FROMDEVICE DMA_FROM_DEVICE
-#define SBUS_DMA_NONE DMA_NONE
-
-/* All the rest use streaming mode mappings. */
-extern dma_addr_t sbus_map_single(struct sbus_dev *, void *, size_t, int);
-extern void sbus_unmap_single(struct sbus_dev *, dma_addr_t, size_t, int);
-extern int sbus_map_sg(struct sbus_dev *, struct scatterlist *, int, int);
-extern void sbus_unmap_sg(struct sbus_dev *, struct scatterlist *, int, int);
-
-/* Finally, allow explicit synchronization of streamable mappings. */
-extern void sbus_dma_sync_single_for_cpu(struct sbus_dev *, dma_addr_t, size_t, int);
-#define sbus_dma_sync_single sbus_dma_sync_single_for_cpu
-extern void sbus_dma_sync_single_for_device(struct sbus_dev *, dma_addr_t, size_t, int);
-extern void sbus_dma_sync_sg_for_cpu(struct sbus_dev *, struct scatterlist *, int, int);
-#define sbus_dma_sync_sg sbus_dma_sync_sg_for_cpu
-extern void sbus_dma_sync_sg_for_device(struct sbus_dev *, struct scatterlist *, int, int);
-
-/* Eric Brower (ebrower@usa.net)
- * Translate SBus interrupt levels to ino values--
- * this is used when converting sbus "interrupts" OBP
- * node values to "intr" node values, and is platform
- * dependent. If only we could call OBP with
- * "sbus-intr>cpu (sbint -- ino)" from kernel...
- * See .../drivers/sbus/sbus.c for details.
- */
-BTFIXUPDEF_CALL(unsigned int, sbint_to_irq, struct sbus_dev *sdev, unsigned int)
-#define sbint_to_irq(sdev, sbint) BTFIXUP_CALL(sbint_to_irq)(sdev, sbint)
-
-extern void sbus_arch_bus_ranges_init(struct device_node *, struct sbus_bus *);
-extern void sbus_setup_iommu(struct sbus_bus *, struct device_node *);
-extern void sbus_setup_arch_props(struct sbus_bus *, struct device_node *);
-extern int sbus_arch_preinit(void);
-extern void sbus_arch_postinit(void);
-
-#endif /* !(_SPARC_SBUS_H) */
+#ifndef ___ASM_SPARC_SBUS_H
+#define ___ASM_SPARC_SBUS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm-sparc/sbus_64.h>
+#else
+#include <asm-sparc/sbus_32.h>
+#endif
+#endif