summaryrefslogtreecommitdiffstats
path: root/include/asm-sparc/uaccess_64.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-sparc/uaccess_64.h')
-rw-r--r--include/asm-sparc/uaccess_64.h273
1 files changed, 0 insertions, 273 deletions
diff --git a/include/asm-sparc/uaccess_64.h b/include/asm-sparc/uaccess_64.h
deleted file mode 100644
index 296ef30e05c..00000000000
--- a/include/asm-sparc/uaccess_64.h
+++ /dev/null
@@ -1,273 +0,0 @@
-#ifndef _ASM_UACCESS_H
-#define _ASM_UACCESS_H
-
-/*
- * User space memory access functions
- */
-
-#ifdef __KERNEL__
-#include <linux/compiler.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <asm/asi.h>
-#include <asm/system.h>
-#include <asm/spitfire.h>
-#include <asm-generic/uaccess.h>
-#endif
-
-#ifndef __ASSEMBLY__
-
-/*
- * Sparc64 is segmented, though more like the M68K than the I386.
- * We use the secondary ASI to address user memory, which references a
- * completely different VM map, thus there is zero chance of the user
- * doing something queer and tricking us into poking kernel memory.
- *
- * What is left here is basically what is needed for the other parts of
- * the kernel that expect to be able to manipulate, erum, "segments".
- * Or perhaps more properly, permissions.
- *
- * "For historical reasons, these macros are grossly misnamed." -Linus
- */
-
-#define KERNEL_DS ((mm_segment_t) { ASI_P })
-#define USER_DS ((mm_segment_t) { ASI_AIUS }) /* har har har */
-
-#define VERIFY_READ 0
-#define VERIFY_WRITE 1
-
-#define get_fs() ((mm_segment_t) { get_thread_current_ds() })
-#define get_ds() (KERNEL_DS)
-
-#define segment_eq(a,b) ((a).seg == (b).seg)
-
-#define set_fs(val) \
-do { \
- set_thread_current_ds((val).seg); \
- __asm__ __volatile__ ("wr %%g0, %0, %%asi" : : "r" ((val).seg)); \
-} while(0)
-
-static inline int __access_ok(const void __user * addr, unsigned long size)
-{
- return 1;
-}
-
-static inline int access_ok(int type, const void __user * addr, unsigned long size)
-{
- return 1;
-}
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue. No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path. This means when everything is well,
- * we don't even have to jump over them. Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry {
- unsigned int insn, fixup;
-};
-
-extern void __ret_efault(void);
-extern void __retl_efault(void);
-
-/* Uh, these should become the main single-value transfer routines..
- * They automatically use the right size if we just have the right
- * pointer type..
- *
- * This gets kind of ugly. We want to return _two_ values in "get_user()"
- * and yet we don't want to do any pointers, because that is too much
- * of a performance impact. Thus we have a few rather ugly macros here,
- * and hide all the ugliness from the user.
- */
-#define put_user(x,ptr) ({ \
-unsigned long __pu_addr = (unsigned long)(ptr); \
-__chk_user_ptr(ptr); \
-__put_user_nocheck((__typeof__(*(ptr)))(x),__pu_addr,sizeof(*(ptr))); })
-
-#define get_user(x,ptr) ({ \
-unsigned long __gu_addr = (unsigned long)(ptr); \
-__chk_user_ptr(ptr); \
-__get_user_nocheck((x),__gu_addr,sizeof(*(ptr)),__typeof__(*(ptr))); })
-
-#define __put_user(x,ptr) put_user(x,ptr)
-#define __get_user(x,ptr) get_user(x,ptr)
-
-struct __large_struct { unsigned long buf[100]; };
-#define __m(x) ((struct __large_struct *)(x))
-
-#define __put_user_nocheck(data,addr,size) ({ \
-register int __pu_ret; \
-switch (size) { \
-case 1: __put_user_asm(data,b,addr,__pu_ret); break; \
-case 2: __put_user_asm(data,h,addr,__pu_ret); break; \
-case 4: __put_user_asm(data,w,addr,__pu_ret); break; \
-case 8: __put_user_asm(data,x,addr,__pu_ret); break; \
-default: __pu_ret = __put_user_bad(); break; \
-} __pu_ret; })
-
-#define __put_user_asm(x,size,addr,ret) \
-__asm__ __volatile__( \
- "/* Put user asm, inline. */\n" \
-"1:\t" "st"#size "a %1, [%2] %%asi\n\t" \
- "clr %0\n" \
-"2:\n\n\t" \
- ".section .fixup,#alloc,#execinstr\n\t" \
- ".align 4\n" \
-"3:\n\t" \
- "sethi %%hi(2b), %0\n\t" \
- "jmpl %0 + %%lo(2b), %%g0\n\t" \
- " mov %3, %0\n\n\t" \
- ".previous\n\t" \
- ".section __ex_table,\"a\"\n\t" \
- ".align 4\n\t" \
- ".word 1b, 3b\n\t" \
- ".previous\n\n\t" \
- : "=r" (ret) : "r" (x), "r" (__m(addr)), \
- "i" (-EFAULT))
-
-extern int __put_user_bad(void);
-
-#define __get_user_nocheck(data,addr,size,type) ({ \
-register int __gu_ret; \
-register unsigned long __gu_val; \
-switch (size) { \
-case 1: __get_user_asm(__gu_val,ub,addr,__gu_ret); break; \
-case 2: __get_user_asm(__gu_val,uh,addr,__gu_ret); break; \
-case 4: __get_user_asm(__gu_val,uw,addr,__gu_ret); break; \
-case 8: __get_user_asm(__gu_val,x,addr,__gu_ret); break; \
-default: __gu_val = 0; __gu_ret = __get_user_bad(); break; \
-} data = (type) __gu_val; __gu_ret; })
-
-#define __get_user_nocheck_ret(data,addr,size,type,retval) ({ \
-register unsigned long __gu_val __asm__ ("l1"); \
-switch (size) { \
-case 1: __get_user_asm_ret(__gu_val,ub,addr,retval); break; \
-case 2: __get_user_asm_ret(__gu_val,uh,addr,retval); break; \
-case 4: __get_user_asm_ret(__gu_val,uw,addr,retval); break; \
-case 8: __get_user_asm_ret(__gu_val,x,addr,retval); break; \
-default: if (__get_user_bad()) return retval; \
-} data = (type) __gu_val; })
-
-#define __get_user_asm(x,size,addr,ret) \
-__asm__ __volatile__( \
- "/* Get user asm, inline. */\n" \
-"1:\t" "ld"#size "a [%2] %%asi, %1\n\t" \
- "clr %0\n" \
-"2:\n\n\t" \
- ".section .fixup,#alloc,#execinstr\n\t" \
- ".align 4\n" \
-"3:\n\t" \
- "sethi %%hi(2b), %0\n\t" \
- "clr %1\n\t" \
- "jmpl %0 + %%lo(2b), %%g0\n\t" \
- " mov %3, %0\n\n\t" \
- ".previous\n\t" \
- ".section __ex_table,\"a\"\n\t" \
- ".align 4\n\t" \
- ".word 1b, 3b\n\n\t" \
- ".previous\n\t" \
- : "=r" (ret), "=r" (x) : "r" (__m(addr)), \
- "i" (-EFAULT))
-
-#define __get_user_asm_ret(x,size,addr,retval) \
-if (__builtin_constant_p(retval) && retval == -EFAULT) \
-__asm__ __volatile__( \
- "/* Get user asm ret, inline. */\n" \
-"1:\t" "ld"#size "a [%1] %%asi, %0\n\n\t" \
- ".section __ex_table,\"a\"\n\t" \
- ".align 4\n\t" \
- ".word 1b,__ret_efault\n\n\t" \
- ".previous\n\t" \
- : "=r" (x) : "r" (__m(addr))); \
-else \
-__asm__ __volatile__( \
- "/* Get user asm ret, inline. */\n" \
-"1:\t" "ld"#size "a [%1] %%asi, %0\n\n\t" \
- ".section .fixup,#alloc,#execinstr\n\t" \
- ".align 4\n" \
-"3:\n\t" \
- "ret\n\t" \
- " restore %%g0, %2, %%o0\n\n\t" \
- ".previous\n\t" \
- ".section __ex_table,\"a\"\n\t" \
- ".align 4\n\t" \
- ".word 1b, 3b\n\n\t" \
- ".previous\n\t" \
- : "=r" (x) : "r" (__m(addr)), "i" (retval))
-
-extern int __get_user_bad(void);
-
-extern unsigned long __must_check ___copy_from_user(void *to,
- const void __user *from,
- unsigned long size);
-extern unsigned long copy_from_user_fixup(void *to, const void __user *from,
- unsigned long size);
-static inline unsigned long __must_check
-copy_from_user(void *to, const void __user *from, unsigned long size)
-{
- unsigned long ret = ___copy_from_user(to, from, size);
-
- if (unlikely(ret))
- ret = copy_from_user_fixup(to, from, size);
- return ret;
-}
-#define __copy_from_user copy_from_user
-
-extern unsigned long __must_check ___copy_to_user(void __user *to,
- const void *from,
- unsigned long size);
-extern unsigned long copy_to_user_fixup(void __user *to, const void *from,
- unsigned long size);
-static inline unsigned long __must_check
-copy_to_user(void __user *to, const void *from, unsigned long size)
-{
- unsigned long ret = ___copy_to_user(to, from, size);
-
- if (unlikely(ret))
- ret = copy_to_user_fixup(to, from, size);
- return ret;
-}
-#define __copy_to_user copy_to_user
-
-extern unsigned long __must_check ___copy_in_user(void __user *to,
- const void __user *from,
- unsigned long size);
-extern unsigned long copy_in_user_fixup(void __user *to, void __user *from,
- unsigned long size);
-static inline unsigned long __must_check
-copy_in_user(void __user *to, void __user *from, unsigned long size)
-{
- unsigned long ret = ___copy_in_user(to, from, size);
-
- if (unlikely(ret))
- ret = copy_in_user_fixup(to, from, size);
- return ret;
-}
-#define __copy_in_user copy_in_user
-
-extern unsigned long __must_check __clear_user(void __user *, unsigned long);
-
-#define clear_user __clear_user
-
-extern long __must_check __strncpy_from_user(char *dest, const char __user *src, long count);
-
-#define strncpy_from_user __strncpy_from_user
-
-extern long __strlen_user(const char __user *);
-extern long __strnlen_user(const char __user *, long len);
-
-#define strlen_user __strlen_user
-#define strnlen_user __strnlen_user
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _ASM_UACCESS_H */