diff options
Diffstat (limited to 'include/asm-v850/anna.h')
| -rw-r--r-- | include/asm-v850/anna.h | 143 |
1 files changed, 143 insertions, 0 deletions
diff --git a/include/asm-v850/anna.h b/include/asm-v850/anna.h new file mode 100644 index 00000000000..3be77d5ecfc --- /dev/null +++ b/include/asm-v850/anna.h @@ -0,0 +1,143 @@ +/* + * include/asm-v850/anna.h -- Anna V850E2 evaluation cpu chip/board + * + * Copyright (C) 2001,02,03 NEC Electronics Corporation + * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_ANNA_H__ +#define __V850_ANNA_H__ + +#include <asm/v850e2.h> /* Based on V850E2 core. */ + + +#define CPU_MODEL "v850e2/anna" +#define CPU_MODEL_LONG "NEC V850E2/Anna" +#define PLATFORM "anna" +#define PLATFORM_LONG "NEC/Midas lab V850E2/Anna evaluation board" + +#define CPU_CLOCK_FREQ 200000000 /* 200MHz */ +#define SYS_CLOCK_FREQ 33300000 /* 33.3MHz */ + + +/* 1MB of static RAM. This memory is mirrored 64 times. */ +#define SRAM_ADDR 0x04000000 +#define SRAM_SIZE 0x00100000 /* 1MB */ +/* 64MB of DRAM. */ +#define SDRAM_ADDR 0x08000000 +#define SDRAM_SIZE 0x04000000 /* 64MB */ + + +/* For <asm/page.h> */ +#define PAGE_OFFSET SRAM_ADDR + +/* We use on-chip RAM, for a few miscellaneous variables that must be + accessible using a load instruction relative to R0. The Anna chip has + 128K of `dLB' ram nominally located at 0xFFF00000, but it's mirrored + every 128K, so we can use the `last mirror' (except for the portion at + the top which is overridden by I/O space). In addition, the early + sample chip we're using has lots of memory errors in the dLB ram, so we + use a specially chosen location that has at least 20 bytes of contiguous + valid memory (xxxF0020 - xxxF003F). */ +#define R0_RAM_ADDR 0xFFFF8020 + + +/* Anna specific control registers. */ +#define ANNA_ILBEN_ADDR 0xFFFFF7F2 +#define ANNA_ILBEN (*(volatile u16 *)ANNA_ILBEN_ADDR) + + +/* I/O port P0-P3. */ +/* Direct I/O. Bits 0-7 are pins Pn0-Pn7. */ +#define ANNA_PORT_IO_ADDR(n) (0xFFFFF400 + (n) * 2) +#define ANNA_PORT_IO(n) (*(volatile u8 *)ANNA_PORT_IO_ADDR(n)) +/* Port mode (for direct I/O, 0 = output, 1 = input). */ +#define ANNA_PORT_PM_ADDR(n) (0xFFFFF410 + (n) * 2) +#define ANNA_PORT_PM(n) (*(volatile u8 *)ANNA_PORT_PM_ADDR(n)) + + +/* Hardware-specific interrupt numbers (in the kernel IRQ namespace). */ +#define IRQ_INTP(n) (n) /* Pnnn (pin) interrupts 0-15 */ +#define IRQ_INTP_NUM 16 +#define IRQ_INTOV(n) (0x10 + (n)) /* 0-2 */ +#define IRQ_INTOV_NUM 2 +#define IRQ_INTCCC(n) (0x12 + (n)) +#define IRQ_INTCCC_NUM 4 +#define IRQ_INTCMD(n) (0x16 + (n)) /* interval timer interrupts 0-5 */ +#define IRQ_INTCMD_NUM 6 +#define IRQ_INTDMA(n) (0x1C + (n)) /* DMA interrupts 0-3 */ +#define IRQ_INTDMA_NUM 4 +#define IRQ_INTDMXER 0x20 +#define IRQ_INTSRE(n) (0x21 + (n)*3) /* UART 0-1 reception error */ +#define IRQ_INTSRE_NUM 2 +#define IRQ_INTSR(n) (0x22 + (n)*3) /* UART 0-1 reception completion */ +#define IRQ_INTSR_NUM 2 +#define IRQ_INTST(n) (0x23 + (n)*3) /* UART 0-1 transmission completion */ +#define IRQ_INTST_NUM 2 + +#define NUM_CPU_IRQS 64 + +#ifndef __ASSEMBLY__ +/* Initialize chip interrupts. */ +extern void anna_init_irqs (void); +#endif + + +/* Anna UART details (basically the same as the V850E/MA1, but 2 channels). */ +#define V850E_UART_NUM_CHANNELS 2 +#define V850E_UART_BASE_FREQ (SYS_CLOCK_FREQ / 2) +#define V850E_UART_CHIP_NAME "V850E2/NA85E2A" + +/* This is the UART channel that's actually connected on the board. */ +#define V850E_UART_CONSOLE_CHANNEL 1 + +/* This is a function that gets called before configuring the UART. */ +#define V850E_UART_PRE_CONFIGURE anna_uart_pre_configure +#ifndef __ASSEMBLY__ +extern void anna_uart_pre_configure (unsigned chan, + unsigned cflags, unsigned baud); +#endif + +/* This board supports RTS/CTS for the on-chip UART, but only for channel 1. */ + +/* CTS for UART channel 1 is pin P37 (bit 7 of port 3). */ +#define V850E_UART_CTS(chan) ((chan) == 1 ? !(ANNA_PORT_IO(3) & 0x80) : 1) +/* RTS for UART channel 1 is pin P07 (bit 7 of port 0). */ +#define V850E_UART_SET_RTS(chan, val) \ + do { \ + if (chan == 1) { \ + unsigned old = ANNA_PORT_IO(0); \ + if (val) \ + ANNA_PORT_IO(0) = old & ~0x80; \ + else \ + ANNA_PORT_IO(0) = old | 0x80; \ + } \ + } while (0) + + +/* Timer C details. */ +#define V850E_TIMER_C_BASE_ADDR 0xFFFFF600 + +/* Timer D details (the Anna actually has 5 of these; should change later). */ +#define V850E_TIMER_D_BASE_ADDR 0xFFFFF540 +#define V850E_TIMER_D_TMD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x0) +#define V850E_TIMER_D_CMD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x2) +#define V850E_TIMER_D_TMCD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x4) + +#define V850E_TIMER_D_BASE_FREQ SYS_CLOCK_FREQ +#define V850E_TIMER_D_TMCD_CS_MIN 1 /* min 2^1 divider */ + + +/* For <asm/param.h> */ +#ifndef HZ +#define HZ 100 +#endif + + +#endif /* __V850_ANNA_H__ */ |