diff options
Diffstat (limited to 'include/asm-v850/as85ep1.h')
| -rw-r--r-- | include/asm-v850/as85ep1.h | 152 |
1 files changed, 0 insertions, 152 deletions
diff --git a/include/asm-v850/as85ep1.h b/include/asm-v850/as85ep1.h deleted file mode 100644 index 5a5ca9073d0..00000000000 --- a/include/asm-v850/as85ep1.h +++ /dev/null @@ -1,152 +0,0 @@ -/* - * include/asm-v850/as85ep1.h -- AS85EP1 evaluation CPU chip/board - * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_AS85EP1_H__ -#define __V850_AS85EP1_H__ - -#include <asm/v850e.h> - - -#define CPU_MODEL "as85ep1" -#define CPU_MODEL_LONG "NEC V850E/AS85EP1" -#define PLATFORM "AS85EP1" -#define PLATFORM_LONG "NEC V850E/AS85EP1 evaluation board" - -#define CPU_CLOCK_FREQ 96000000 /* 96MHz */ -#define SYS_CLOCK_FREQ CPU_CLOCK_FREQ - - -/* 1MB of static RAM. */ -#define SRAM_ADDR 0x00400000 -#define SRAM_SIZE 0x00100000 /* 1MB */ -/* About 58MB of DRAM. This can actually be at one of two positions, - determined by jump JP3; we have to use the first position because the - second is partially out of processor instruction addressing range - (though in the second position there's actually 64MB available). */ -#define SDRAM_ADDR 0x00600000 -#define SDRAM_SIZE 0x039F8000 /* approx 58MB */ - -/* For <asm/page.h> */ -#define PAGE_OFFSET SRAM_ADDR - -/* We use on-chip RAM, for a few miscellaneous variables that must be - accessible using a load instruction relative to R0. The AS85EP1 chip - 16K of internal RAM located slightly before I/O space. */ -#define R0_RAM_ADDR 0xFFFF8000 - - -/* AS85EP1 specific control registers. */ -#define AS85EP1_CSC_ADDR(n) (0xFFFFF060 + (n) * 2) -#define AS85EP1_CSC(n) (*(volatile u16 *)AS85EP1_CSC_ADDR(n)) -#define AS85EP1_BSC_ADDR 0xFFFFF066 -#define AS85EP1_BSC (*(volatile u16 *)AS85EP1_BSC_ADDR) -#define AS85EP1_BCT_ADDR(n) (0xFFFFF480 + (n) * 2) -#define AS85EP1_BCT(n) (*(volatile u16 *)AS85EP1_BCT_ADDR(n)) -#define AS85EP1_DWC_ADDR(n) (0xFFFFF484 + (n) * 2) -#define AS85EP1_DWC(n) (*(volatile u16 *)AS85EP1_DWC_ADDR(n)) -#define AS85EP1_BCC_ADDR 0xFFFFF488 -#define AS85EP1_BCC (*(volatile u16 *)AS85EP1_BCC_ADDR) -#define AS85EP1_ASC_ADDR 0xFFFFF48A -#define AS85EP1_ASC (*(volatile u16 *)AS85EP1_ASC_ADDR) -#define AS85EP1_BCP_ADDR 0xFFFFF48C -#define AS85EP1_BCP (*(volatile u16 *)AS85EP1_BCP_ADDR) -#define AS85EP1_LBS_ADDR 0xFFFFF48E -#define AS85EP1_LBS (*(volatile u16 *)AS85EP1_LBS_ADDR) -#define AS85EP1_BMC_ADDR 0xFFFFF498 -#define AS85EP1_BMC (*(volatile u16 *)AS85EP1_BMC_ADDR) -#define AS85EP1_PRC_ADDR 0xFFFFF49A -#define AS85EP1_PRC (*(volatile u16 *)AS85EP1_PRC_ADDR) -#define AS85EP1_SCR_ADDR(n) (0xFFFFF4A0 + (n) * 4) -#define AS85EP1_SCR(n) (*(volatile u16 *)AS85EP1_SCR_ADDR(n)) -#define AS85EP1_RFS_ADDR(n) (0xFFFFF4A2 + (n) * 4) -#define AS85EP1_RFS(n) (*(volatile u16 *)AS85EP1_RFS_ADDR(n)) -#define AS85EP1_IRAMM_ADDR 0xFFFFF80A -#define AS85EP1_IRAMM (*(volatile u8 *)AS85EP1_IRAMM_ADDR) - - - -/* I/O port P0-P13. */ -/* Direct I/O. Bits 0-7 are pins Pn0-Pn7. */ -#define AS85EP1_PORT_IO_ADDR(n) (0xFFFFF400 + (n) * 2) -#define AS85EP1_PORT_IO(n) (*(volatile u8 *)AS85EP1_PORT_IO_ADDR(n)) -/* Port mode (for direct I/O, 0 = output, 1 = input). */ -#define AS85EP1_PORT_PM_ADDR(n) (0xFFFFF420 + (n) * 2) -#define AS85EP1_PORT_PM(n) (*(volatile u8 *)AS85EP1_PORT_PM_ADDR(n)) -/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode). */ -#define AS85EP1_PORT_PMC_ADDR(n) (0xFFFFF440 + (n) * 2) -#define AS85EP1_PORT_PMC(n) (*(volatile u8 *)AS85EP1_PORT_PMC_ADDR(n)) - - -/* Hardware-specific interrupt numbers (in the kernel IRQ namespace). */ -#define IRQ_INTCCC(n) (0x0C + (n)) -#define IRQ_INTCCC_NUM 8 -#define IRQ_INTCMD(n) (0x14 + (n)) /* interval timer interrupts 0-5 */ -#define IRQ_INTCMD_NUM 6 -#define IRQ_INTSRE(n) (0x1E + (n)*3) /* UART 0-1 reception error */ -#define IRQ_INTSRE_NUM 2 -#define IRQ_INTSR(n) (0x1F + (n)*3) /* UART 0-1 reception completion */ -#define IRQ_INTSR_NUM 2 -#define IRQ_INTST(n) (0x20 + (n)*3) /* UART 0-1 transmission completion */ -#define IRQ_INTST_NUM 2 - -#define NUM_CPU_IRQS 64 - -#ifndef __ASSEMBLY__ -/* Initialize chip interrupts. */ -extern void as85ep1_init_irqs (void); -#endif - - -/* AS85EP1 UART details (basically the same as the V850E/MA1, but 2 channels). */ -#define V850E_UART_NUM_CHANNELS 2 -#define V850E_UART_BASE_FREQ (SYS_CLOCK_FREQ / 4) -#define V850E_UART_CHIP_NAME "V850E/NA85E" - -/* This is a function that gets called before configuring the UART. */ -#define V850E_UART_PRE_CONFIGURE as85ep1_uart_pre_configure -#ifndef __ASSEMBLY__ -extern void as85ep1_uart_pre_configure (unsigned chan, - unsigned cflags, unsigned baud); -#endif - -/* This board supports RTS/CTS for the on-chip UART, but only for channel 1. */ - -/* CTS for UART channel 1 is pin P54 (bit 4 of port 5). */ -#define V850E_UART_CTS(chan) ((chan) == 1 ? !(AS85EP1_PORT_IO(5) & 0x10) : 1) -/* RTS for UART channel 1 is pin P53 (bit 3 of port 5). */ -#define V850E_UART_SET_RTS(chan, val) \ - do { \ - if (chan == 1) { \ - unsigned old = AS85EP1_PORT_IO(5); \ - if (val) \ - AS85EP1_PORT_IO(5) = old & ~0x8; \ - else \ - AS85EP1_PORT_IO(5) = old | 0x8; \ - } \ - } while (0) - - -/* Timer C details. */ -#define V850E_TIMER_C_BASE_ADDR 0xFFFFF600 - -/* Timer D details (the AS85EP1 actually has 5 of these; should change later). */ -#define V850E_TIMER_D_BASE_ADDR 0xFFFFF540 -#define V850E_TIMER_D_TMD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x0) -#define V850E_TIMER_D_CMD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x2) -#define V850E_TIMER_D_TMCD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x4) - -#define V850E_TIMER_D_BASE_FREQ SYS_CLOCK_FREQ -#define V850E_TIMER_D_TMCD_CS_MIN 2 /* min 2^2 divider */ - - -#endif /* __V850_AS85EP1_H__ */ |