1 files changed, 0 insertions, 451 deletions
diff --git a/include/asm-x86/bitops.h b/include/asm-x86/bitops.h
deleted file mode 100644
index 451a74762bd..00000000000
--- a/include/asm-x86/bitops.h
+++ /dev/null
@@ -1,451 +0,0 @@
-#ifndef ASM_X86__BITOPS_H
-#define ASM_X86__BITOPS_H
-
-/*
- * Copyright 1992, Linus Torvalds.
- */
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-#include <linux/compiler.h>
-#include <asm/alternative.h>
-
-/*
- * These have to be done with inline assembly: that way the bit-setting
- * is guaranteed to be atomic. All bit operations return 0 if the bit
- * was cleared before the operation and != 0 if it was not.
- *
- * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
- */
-
-#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 1)
-/* Technically wrong, but this avoids compilation errors on some gcc
-   versions. */
-#define BITOP_ADDR(x) "=m" (*(volatile long *) (x))
-#else
-#define BITOP_ADDR(x) "+m" (*(volatile long *) (x))
-#endif
-
-#define ADDR				BITOP_ADDR(addr)
-
-/*
- * We do the locked ops that don't return the old value as
- * a mask operation on a byte.
- */
-#define IS_IMMEDIATE(nr)		(__builtin_constant_p(nr))
-#define CONST_MASK_ADDR(nr, addr)	BITOP_ADDR((void *)(addr) + ((nr)>>3))
-#define CONST_MASK(nr)			(1 << ((nr) & 7))
-
-/**
- * set_bit - Atomically set a bit in memory
- * @nr: the bit to set
- * @addr: the address to start counting from
- *
- * This function is atomic and may not be reordered.  See __set_bit()
- * if you do not require the atomic guarantees.
- *
- * Note: there are no guarantees that this function will not be reordered
- * on non x86 architectures, so if you are writing portable code,
- * make sure not to rely on its reordering guarantees.
- *
- * Note that @nr may be almost arbitrarily large; this function is not
- * restricted to acting on a single-word quantity.
- */
-static inline void set_bit(unsigned int nr, volatile unsigned long *addr)
-{
-	if (IS_IMMEDIATE(nr)) {
-		asm volatile(LOCK_PREFIX "orb %1,%0"
-			: CONST_MASK_ADDR(nr, addr)
-			: "iq" ((u8)CONST_MASK(nr))
-			: "memory");
-	} else {
-		asm volatile(LOCK_PREFIX "bts %1,%0"
-			: BITOP_ADDR(addr) : "Ir" (nr) : "memory");
-	}
-}
-
-/**
- * __set_bit - Set a bit in memory
- * @nr: the bit to set
- * @addr: the address to start counting from
- *
- * Unlike set_bit(), this function is non-atomic and may be reordered.
- * If it's called on the same region of memory simultaneously, the effect
- * may be that only one operation succeeds.
- */
-static inline void __set_bit(int nr, volatile unsigned long *addr)
-{
-	asm volatile("bts %1,%0" : ADDR : "Ir" (nr) : "memory");
-}
-
-/**
- * clear_bit - Clears a bit in memory
- * @nr: Bit to clear
- * @addr: Address to start counting from
- *
- * clear_bit() is atomic and may not be reordered.  However, it does
- * not contain a memory barrier, so if it is used for locking purposes,
- * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
- * in order to ensure changes are visible on other processors.
- */
-static inline void clear_bit(int nr, volatile unsigned long *addr)
-{
-	if (IS_IMMEDIATE(nr)) {
-		asm volatile(LOCK_PREFIX "andb %1,%0"
-			: CONST_MASK_ADDR(nr, addr)
-			: "iq" ((u8)~CONST_MASK(nr)));
-	} else {
-		asm volatile(LOCK_PREFIX "btr %1,%0"
-			: BITOP_ADDR(addr)
-			: "Ir" (nr));
-	}
-}
-
-/*
- * clear_bit_unlock - Clears a bit in memory
- * @nr: Bit to clear
- * @addr: Address to start counting from
- *
- * clear_bit() is atomic and implies release semantics before the memory
- * operation. It can be used for an unlock.
- */
-static inline void clear_bit_unlock(unsigned nr, volatile unsigned long *addr)
-{
-	barrier();
-	clear_bit(nr, addr);
-}
-
-static inline void __clear_bit(int nr, volatile unsigned long *addr)
-{
-	asm volatile("btr %1,%0" : ADDR : "Ir" (nr));
-}
-
-/*
- * __clear_bit_unlock - Clears a bit in memory
- * @nr: Bit to clear
- * @addr: Address to start counting from
- *
- * __clear_bit() is non-atomic and implies release semantics before the memory
- * operation. It can be used for an unlock if no other CPUs can concurrently
- * modify other bits in the word.
- *
- * No memory barrier is required here, because x86 cannot reorder stores past
- * older loads. Same principle as spin_unlock.
- */
-static inline void __clear_bit_unlock(unsigned nr, volatile unsigned long *addr)
-{
-	barrier();
-	__clear_bit(nr, addr);
-}
-
-#define smp_mb__before_clear_bit()	barrier()
-#define smp_mb__after_clear_bit()	barrier()
-
-/**
- * __change_bit - Toggle a bit in memory
- * @nr: the bit to change
- * @addr: the address to start counting from
- *
- * Unlike change_bit(), this function is non-atomic and may be reordered.
- * If it's called on the same region of memory simultaneously, the effect
- * may be that only one operation succeeds.
- */
-static inline void __change_bit(int nr, volatile unsigned long *addr)
-{
-	asm volatile("btc %1,%0" : ADDR : "Ir" (nr));
-}
-
-/**
- * change_bit - Toggle a bit in memory
- * @nr: Bit to change
- * @addr: Address to start counting from
- *
- * change_bit() is atomic and may not be reordered.
- * Note that @nr may be almost arbitrarily large; this function is not
- * restricted to acting on a single-word quantity.
- */
-static inline void change_bit(int nr, volatile unsigned long *addr)
-{
-	asm volatile(LOCK_PREFIX "btc %1,%0" : ADDR : "Ir" (nr));
-}
-
-/**
- * test_and_set_bit - Set a bit and return its old value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is atomic and cannot be reordered.
- * It also implies a memory barrier.
- */
-static inline int test_and_set_bit(int nr, volatile unsigned long *addr)
-{
-	int oldbit;
-
-	asm volatile(LOCK_PREFIX "bts %2,%1\n\t"
-		     "sbb %0,%0" : "=r" (oldbit), ADDR : "Ir" (nr) : "memory");
-
-	return oldbit;
-}
-
-/**
- * test_and_set_bit_lock - Set a bit and return its old value for lock
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This is the same as test_and_set_bit on x86.
- */
-static inline int test_and_set_bit_lock(int nr, volatile unsigned long *addr)
-{
-	return test_and_set_bit(nr, addr);
-}
-
-/**
- * __test_and_set_bit - Set a bit and return its old value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is non-atomic and can be reordered.
- * If two examples of this operation race, one can appear to succeed
- * but actually fail.  You must protect multiple accesses with a lock.
- */
-static inline int __test_and_set_bit(int nr, volatile unsigned long *addr)
-{
-	int oldbit;
-
-	asm("bts %2,%1\n\t"
-	    "sbb %0,%0"
-	    : "=r" (oldbit), ADDR
-	    : "Ir" (nr));
-	return oldbit;
-}
-
-/**
- * test_and_clear_bit - Clear a bit and return its old value
- * @nr: Bit to clear
- * @addr: Address to count from
- *
- * This operation is atomic and cannot be reordered.
- * It also implies a memory barrier.
- */
-static inline int test_and_clear_bit(int nr, volatile unsigned long *addr)
-{
-	int oldbit;
-
-	asm volatile(LOCK_PREFIX "btr %2,%1\n\t"
-		     "sbb %0,%0"
-		     : "=r" (oldbit), ADDR : "Ir" (nr) : "memory");
-
-	return oldbit;
-}
-
-/**
- * __test_and_clear_bit - Clear a bit and return its old value
- * @nr: Bit to clear
- * @addr: Address to count from
- *
- * This operation is non-atomic and can be reordered.
- * If two examples of this operation race, one can appear to succeed
- * but actually fail.  You must protect multiple accesses with a lock.
- */
-static inline int __test_and_clear_bit(int nr, volatile unsigned long *addr)
-{
-	int oldbit;
-
-	asm volatile("btr %2,%1\n\t"
-		     "sbb %0,%0"
-		     : "=r" (oldbit), ADDR
-		     : "Ir" (nr));
-	return oldbit;
-}
-
-/* WARNING: non atomic and it can be reordered! */
-static inline int __test_and_change_bit(int nr, volatile unsigned long *addr)
-{
-	int oldbit;
-
-	asm volatile("btc %2,%1\n\t"
-		     "sbb %0,%0"
-		     : "=r" (oldbit), ADDR
-		     : "Ir" (nr) : "memory");
-
-	return oldbit;
-}
-
-/**
- * test_and_change_bit - Change a bit and return its old value
- * @nr: Bit to change
- * @addr: Address to count from
- *
- * This operation is atomic and cannot be reordered.
- * It also implies a memory barrier.
- */
-static inline int test_and_change_bit(int nr, volatile unsigned long *addr)
-{
-	int oldbit;
-
-	asm volatile(LOCK_PREFIX "btc %2,%1\n\t"
-		     "sbb %0,%0"
-		     : "=r" (oldbit), ADDR : "Ir" (nr) : "memory");
-
-	return oldbit;
-}
-
-static inline int constant_test_bit(int nr, const volatile unsigned long *addr)
-{
-	return ((1UL << (nr % BITS_PER_LONG)) &
-		(((unsigned long *)addr)[nr / BITS_PER_LONG])) != 0;
-}
-
-static inline int variable_test_bit(int nr, volatile const unsigned long *addr)
-{
-	int oldbit;
-
-	asm volatile("bt %2,%1\n\t"
-		     "sbb %0,%0"
-		     : "=r" (oldbit)
-		     : "m" (*(unsigned long *)addr), "Ir" (nr));
-
-	return oldbit;
-}
-
-#if 0 /* Fool kernel-doc since it doesn't do macros yet */
-/**
- * test_bit - Determine whether a bit is set
- * @nr: bit number to test
- * @addr: Address to start counting from
- */
-static int test_bit(int nr, const volatile unsigned long *addr);
-#endif
-
-#define test_bit(nr, addr)			\
-	(__builtin_constant_p((nr))		\
-	 ? constant_test_bit((nr), (addr))	\
-	 : variable_test_bit((nr), (addr)))
-
-/**
- * __ffs - find first set bit in word
- * @word: The word to search
- *
- * Undefined if no bit exists, so code should check against 0 first.
- */
-static inline unsigned long __ffs(unsigned long word)
-{
-	asm("bsf %1,%0"
-		: "=r" (word)
-		: "rm" (word));
-	return word;
-}
-
-/**
- * ffz - find first zero bit in word
- * @word: The word to search
- *
- * Undefined if no zero exists, so code should check against ~0UL first.
- */
-static inline unsigned long ffz(unsigned long word)
-{
-	asm("bsf %1,%0"
-		: "=r" (word)
-		: "r" (~word));
-	return word;
-}
-
-/*
- * __fls: find last set bit in word
- * @word: The word to search
- *
- * Undefined if no set bit exists, so code should check against 0 first.
- */
-static inline unsigned long __fls(unsigned long word)
-{
-	asm("bsr %1,%0"
-	    : "=r" (word)
-	    : "rm" (word));
-	return word;
-}
-
-#ifdef __KERNEL__
-/**
- * ffs - find first set bit in word
- * @x: the word to search
- *
- * This is defined the same way as the libc and compiler builtin ffs
- * routines, therefore differs in spirit from the other bitops.
- *
- * ffs(value) returns 0 if value is 0 or the position of the first
- * set bit if value is nonzero. The first (least significant) bit
- * is at position 1.
- */
-static inline int ffs(int x)
-{
-	int r;
-#ifdef CONFIG_X86_CMOV
-	asm("bsfl %1,%0\n\t"
-	    "cmovzl %2,%0"
-	    : "=r" (r) : "rm" (x), "r" (-1));
-#else
-	asm("bsfl %1,%0\n\t"
-	    "jnz 1f\n\t"
-	    "movl $-1,%0\n"
-	    "1:" : "=r" (r) : "rm" (x));
-#endif
-	return r + 1;
-}
-
-/**
- * fls - find last set bit in word
- * @x: the word to search
- *
- * This is defined in a similar way as the libc and compiler builtin
- * ffs, but returns the position of the most significant set bit.
- *
- * fls(value) returns 0 if value is 0 or the position of the last
- * set bit if value is nonzero. The last (most significant) bit is
- * at position 32.
- */
-static inline int fls(int x)
-{
-	int r;
-#ifdef CONFIG_X86_CMOV
-	asm("bsrl %1,%0\n\t"
-	    "cmovzl %2,%0"
-	    : "=&r" (r) : "rm" (x), "rm" (-1));
-#else
-	asm("bsrl %1,%0\n\t"
-	    "jnz 1f\n\t"
-	    "movl $-1,%0\n"
-	    "1:" : "=r" (r) : "rm" (x));
-#endif
-	return r + 1;
-}
-#endif /* __KERNEL__ */
-
-#undef ADDR
-
-#ifdef __KERNEL__
-
-#include <asm-generic/bitops/sched.h>
-
-#define ARCH_HAS_FAST_MULTIPLIER 1
-
-#include <asm-generic/bitops/hweight.h>
-
-#endif /* __KERNEL__ */
-
-#include <asm-generic/bitops/fls64.h>
-
-#ifdef __KERNEL__
-
-#include <asm-generic/bitops/ext2-non-atomic.h>
-
-#define ext2_set_bit_atomic(lock, nr, addr)			\
-	test_and_set_bit((nr), (unsigned long *)(addr))
-#define ext2_clear_bit_atomic(lock, nr, addr)			\
-	test_and_clear_bit((nr), (unsigned long *)(addr))
-
-#include <asm-generic/bitops/minix.h>
-
-#endif /* __KERNEL__ */
-#endif /* ASM_X86__BITOPS_H */