1 files changed, 0 insertions, 48 deletions
diff --git a/include/asm-x86/mach-default/mach_timer.h b/include/asm-x86/mach-default/mach_timer.h
deleted file mode 100644
index 4b76e536cd9..00000000000
--- a/include/asm-x86/mach-default/mach_timer.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- *  Machine specific calibrate_tsc() for generic.
- *  Split out from timer_tsc.c by Osamu Tomita <tomita@cinet.co.jp>
- */
-/* ------ Calibrate the TSC ------- 
- * Return 2^32 * (1 / (TSC clocks per usec)) for do_fast_gettimeoffset().
- * Too much 64-bit arithmetic here to do this cleanly in C, and for
- * accuracy's sake we want to keep the overhead on the CTC speaker (channel 2)
- * output busy loop as low as possible. We avoid reading the CTC registers
- * directly because of the awkward 8-bit access mechanism of the 82C54
- * device.
- */
-#ifndef _MACH_TIMER_H
-#define _MACH_TIMER_H
-
-#define CALIBRATE_TIME_MSEC 30 /* 30 msecs */
-#define CALIBRATE_LATCH	\
-	((CLOCK_TICK_RATE * CALIBRATE_TIME_MSEC + 1000/2)/1000)
-
-static inline void mach_prepare_counter(void)
-{
-       /* Set the Gate high, disable speaker */
-	outb((inb(0x61) & ~0x02) | 0x01, 0x61);
-
-	/*
-	 * Now let's take care of CTC channel 2
-	 *
-	 * Set the Gate high, program CTC channel 2 for mode 0,
-	 * (interrupt on terminal count mode), binary count,
-	 * load 5 * LATCH count, (LSB and MSB) to begin countdown.
-	 *
-	 * Some devices need a delay here.
-	 */
-	outb(0xb0, 0x43);			/* binary, mode 0, LSB/MSB, Ch 2 */
-	outb_p(CALIBRATE_LATCH & 0xff, 0x42);	/* LSB of count */
-	outb_p(CALIBRATE_LATCH >> 8, 0x42);       /* MSB of count */
-}
-
-static inline void mach_countup(unsigned long *count_p)
-{
-	unsigned long count = 0;
-	do {
-		count++;
-	} while ((inb_p(0x61) & 0x20) == 0);
-	*count_p = count;
-}
-
-#endif /* !_MACH_TIMER_H */