summaryrefslogtreecommitdiffstats
path: root/include/asm-x86/system.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-x86/system.h')
-rw-r--r--include/asm-x86/system.h425
1 files changed, 0 insertions, 425 deletions
diff --git a/include/asm-x86/system.h b/include/asm-x86/system.h
deleted file mode 100644
index b20c894660f..00000000000
--- a/include/asm-x86/system.h
+++ /dev/null
@@ -1,425 +0,0 @@
-#ifndef ASM_X86__SYSTEM_H
-#define ASM_X86__SYSTEM_H
-
-#include <asm/asm.h>
-#include <asm/segment.h>
-#include <asm/cpufeature.h>
-#include <asm/cmpxchg.h>
-#include <asm/nops.h>
-
-#include <linux/kernel.h>
-#include <linux/irqflags.h>
-
-/* entries in ARCH_DLINFO: */
-#ifdef CONFIG_IA32_EMULATION
-# define AT_VECTOR_SIZE_ARCH 2
-#else
-# define AT_VECTOR_SIZE_ARCH 1
-#endif
-
-#ifdef CONFIG_X86_32
-
-struct task_struct; /* one of the stranger aspects of C forward declarations */
-struct task_struct *__switch_to(struct task_struct *prev,
- struct task_struct *next);
-
-/*
- * Saving eflags is important. It switches not only IOPL between tasks,
- * it also protects other tasks from NT leaking through sysenter etc.
- */
-#define switch_to(prev, next, last) \
-do { \
- /* \
- * Context-switching clobbers all registers, so we clobber \
- * them explicitly, via unused output variables. \
- * (EAX and EBP is not listed because EBP is saved/restored \
- * explicitly for wchan access and EAX is the return value of \
- * __switch_to()) \
- */ \
- unsigned long ebx, ecx, edx, esi, edi; \
- \
- asm volatile("pushfl\n\t" /* save flags */ \
- "pushl %%ebp\n\t" /* save EBP */ \
- "movl %%esp,%[prev_sp]\n\t" /* save ESP */ \
- "movl %[next_sp],%%esp\n\t" /* restore ESP */ \
- "movl $1f,%[prev_ip]\n\t" /* save EIP */ \
- "pushl %[next_ip]\n\t" /* restore EIP */ \
- "jmp __switch_to\n" /* regparm call */ \
- "1:\t" \
- "popl %%ebp\n\t" /* restore EBP */ \
- "popfl\n" /* restore flags */ \
- \
- /* output parameters */ \
- : [prev_sp] "=m" (prev->thread.sp), \
- [prev_ip] "=m" (prev->thread.ip), \
- "=a" (last), \
- \
- /* clobbered output registers: */ \
- "=b" (ebx), "=c" (ecx), "=d" (edx), \
- "=S" (esi), "=D" (edi) \
- \
- /* input parameters: */ \
- : [next_sp] "m" (next->thread.sp), \
- [next_ip] "m" (next->thread.ip), \
- \
- /* regparm parameters for __switch_to(): */ \
- [prev] "a" (prev), \
- [next] "d" (next) \
- \
- : /* reloaded segment registers */ \
- "memory"); \
-} while (0)
-
-/*
- * disable hlt during certain critical i/o operations
- */
-#define HAVE_DISABLE_HLT
-#else
-#define __SAVE(reg, offset) "movq %%" #reg ",(14-" #offset ")*8(%%rsp)\n\t"
-#define __RESTORE(reg, offset) "movq (14-" #offset ")*8(%%rsp),%%" #reg "\n\t"
-
-/* frame pointer must be last for get_wchan */
-#define SAVE_CONTEXT "pushf ; pushq %%rbp ; movq %%rsi,%%rbp\n\t"
-#define RESTORE_CONTEXT "movq %%rbp,%%rsi ; popq %%rbp ; popf\t"
-
-#define __EXTRA_CLOBBER \
- , "rcx", "rbx", "rdx", "r8", "r9", "r10", "r11", \
- "r12", "r13", "r14", "r15"
-
-/* Save restore flags to clear handle leaking NT */
-#define switch_to(prev, next, last) \
- asm volatile(SAVE_CONTEXT \
- "movq %%rsp,%P[threadrsp](%[prev])\n\t" /* save RSP */ \
- "movq %P[threadrsp](%[next]),%%rsp\n\t" /* restore RSP */ \
- "call __switch_to\n\t" \
- ".globl thread_return\n" \
- "thread_return:\n\t" \
- "movq %%gs:%P[pda_pcurrent],%%rsi\n\t" \
- "movq %P[thread_info](%%rsi),%%r8\n\t" \
- LOCK_PREFIX "btr %[tif_fork],%P[ti_flags](%%r8)\n\t" \
- "movq %%rax,%%rdi\n\t" \
- "jc ret_from_fork\n\t" \
- RESTORE_CONTEXT \
- : "=a" (last) \
- : [next] "S" (next), [prev] "D" (prev), \
- [threadrsp] "i" (offsetof(struct task_struct, thread.sp)), \
- [ti_flags] "i" (offsetof(struct thread_info, flags)), \
- [tif_fork] "i" (TIF_FORK), \
- [thread_info] "i" (offsetof(struct task_struct, stack)), \
- [pda_pcurrent] "i" (offsetof(struct x8664_pda, pcurrent)) \
- : "memory", "cc" __EXTRA_CLOBBER)
-#endif
-
-#ifdef __KERNEL__
-#define _set_base(addr, base) do { unsigned long __pr; \
-__asm__ __volatile__ ("movw %%dx,%1\n\t" \
- "rorl $16,%%edx\n\t" \
- "movb %%dl,%2\n\t" \
- "movb %%dh,%3" \
- :"=&d" (__pr) \
- :"m" (*((addr)+2)), \
- "m" (*((addr)+4)), \
- "m" (*((addr)+7)), \
- "0" (base) \
- ); } while (0)
-
-#define _set_limit(addr, limit) do { unsigned long __lr; \
-__asm__ __volatile__ ("movw %%dx,%1\n\t" \
- "rorl $16,%%edx\n\t" \
- "movb %2,%%dh\n\t" \
- "andb $0xf0,%%dh\n\t" \
- "orb %%dh,%%dl\n\t" \
- "movb %%dl,%2" \
- :"=&d" (__lr) \
- :"m" (*(addr)), \
- "m" (*((addr)+6)), \
- "0" (limit) \
- ); } while (0)
-
-#define set_base(ldt, base) _set_base(((char *)&(ldt)) , (base))
-#define set_limit(ldt, limit) _set_limit(((char *)&(ldt)) , ((limit)-1))
-
-extern void native_load_gs_index(unsigned);
-
-/*
- * Load a segment. Fall back on loading the zero
- * segment if something goes wrong..
- */
-#define loadsegment(seg, value) \
- asm volatile("\n" \
- "1:\t" \
- "movl %k0,%%" #seg "\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3:\t" \
- "movl %k1, %%" #seg "\n\t" \
- "jmp 2b\n" \
- ".previous\n" \
- _ASM_EXTABLE(1b,3b) \
- : :"r" (value), "r" (0) : "memory")
-
-
-/*
- * Save a segment register away
- */
-#define savesegment(seg, value) \
- asm("mov %%" #seg ",%0":"=r" (value) : : "memory")
-
-static inline unsigned long get_limit(unsigned long segment)
-{
- unsigned long __limit;
- asm("lsll %1,%0" : "=r" (__limit) : "r" (segment));
- return __limit + 1;
-}
-
-static inline void native_clts(void)
-{
- asm volatile("clts");
-}
-
-/*
- * Volatile isn't enough to prevent the compiler from reordering the
- * read/write functions for the control registers and messing everything up.
- * A memory clobber would solve the problem, but would prevent reordering of
- * all loads stores around it, which can hurt performance. Solution is to
- * use a variable and mimic reads and writes to it to enforce serialization
- */
-static unsigned long __force_order;
-
-static inline unsigned long native_read_cr0(void)
-{
- unsigned long val;
- asm volatile("mov %%cr0,%0\n\t" : "=r" (val), "=m" (__force_order));
- return val;
-}
-
-static inline void native_write_cr0(unsigned long val)
-{
- asm volatile("mov %0,%%cr0": : "r" (val), "m" (__force_order));
-}
-
-static inline unsigned long native_read_cr2(void)
-{
- unsigned long val;
- asm volatile("mov %%cr2,%0\n\t" : "=r" (val), "=m" (__force_order));
- return val;
-}
-
-static inline void native_write_cr2(unsigned long val)
-{
- asm volatile("mov %0,%%cr2": : "r" (val), "m" (__force_order));
-}
-
-static inline unsigned long native_read_cr3(void)
-{
- unsigned long val;
- asm volatile("mov %%cr3,%0\n\t" : "=r" (val), "=m" (__force_order));
- return val;
-}
-
-static inline void native_write_cr3(unsigned long val)
-{
- asm volatile("mov %0,%%cr3": : "r" (val), "m" (__force_order));
-}
-
-static inline unsigned long native_read_cr4(void)
-{
- unsigned long val;
- asm volatile("mov %%cr4,%0\n\t" : "=r" (val), "=m" (__force_order));
- return val;
-}
-
-static inline unsigned long native_read_cr4_safe(void)
-{
- unsigned long val;
- /* This could fault if %cr4 does not exist. In x86_64, a cr4 always
- * exists, so it will never fail. */
-#ifdef CONFIG_X86_32
- asm volatile("1: mov %%cr4, %0\n"
- "2:\n"
- _ASM_EXTABLE(1b, 2b)
- : "=r" (val), "=m" (__force_order) : "0" (0));
-#else
- val = native_read_cr4();
-#endif
- return val;
-}
-
-static inline void native_write_cr4(unsigned long val)
-{
- asm volatile("mov %0,%%cr4": : "r" (val), "m" (__force_order));
-}
-
-#ifdef CONFIG_X86_64
-static inline unsigned long native_read_cr8(void)
-{
- unsigned long cr8;
- asm volatile("movq %%cr8,%0" : "=r" (cr8));
- return cr8;
-}
-
-static inline void native_write_cr8(unsigned long val)
-{
- asm volatile("movq %0,%%cr8" :: "r" (val) : "memory");
-}
-#endif
-
-static inline void native_wbinvd(void)
-{
- asm volatile("wbinvd": : :"memory");
-}
-
-#ifdef CONFIG_PARAVIRT
-#include <asm/paravirt.h>
-#else
-#define read_cr0() (native_read_cr0())
-#define write_cr0(x) (native_write_cr0(x))
-#define read_cr2() (native_read_cr2())
-#define write_cr2(x) (native_write_cr2(x))
-#define read_cr3() (native_read_cr3())
-#define write_cr3(x) (native_write_cr3(x))
-#define read_cr4() (native_read_cr4())
-#define read_cr4_safe() (native_read_cr4_safe())
-#define write_cr4(x) (native_write_cr4(x))
-#define wbinvd() (native_wbinvd())
-#ifdef CONFIG_X86_64
-#define read_cr8() (native_read_cr8())
-#define write_cr8(x) (native_write_cr8(x))
-#define load_gs_index native_load_gs_index
-#endif
-
-/* Clear the 'TS' bit */
-#define clts() (native_clts())
-
-#endif/* CONFIG_PARAVIRT */
-
-#define stts() write_cr0(read_cr0() | X86_CR0_TS)
-
-#endif /* __KERNEL__ */
-
-static inline void clflush(volatile void *__p)
-{
- asm volatile("clflush %0" : "+m" (*(volatile char __force *)__p));
-}
-
-#define nop() asm volatile ("nop")
-
-void disable_hlt(void);
-void enable_hlt(void);
-
-void cpu_idle_wait(void);
-
-extern unsigned long arch_align_stack(unsigned long sp);
-extern void free_init_pages(char *what, unsigned long begin, unsigned long end);
-
-void default_idle(void);
-
-/*
- * Force strict CPU ordering.
- * And yes, this is required on UP too when we're talking
- * to devices.
- */
-#ifdef CONFIG_X86_32
-/*
- * Some non-Intel clones support out of order store. wmb() ceases to be a
- * nop for these.
- */
-#define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2)
-#define rmb() alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2)
-#define wmb() alternative("lock; addl $0,0(%%esp)", "sfence", X86_FEATURE_XMM)
-#else
-#define mb() asm volatile("mfence":::"memory")
-#define rmb() asm volatile("lfence":::"memory")
-#define wmb() asm volatile("sfence" ::: "memory")
-#endif
-
-/**
- * read_barrier_depends - Flush all pending reads that subsequents reads
- * depend on.
- *
- * No data-dependent reads from memory-like regions are ever reordered
- * over this barrier. All reads preceding this primitive are guaranteed
- * to access memory (but not necessarily other CPUs' caches) before any
- * reads following this primitive that depend on the data return by
- * any of the preceding reads. This primitive is much lighter weight than
- * rmb() on most CPUs, and is never heavier weight than is
- * rmb().
- *
- * These ordering constraints are respected by both the local CPU
- * and the compiler.
- *
- * Ordering is not guaranteed by anything other than these primitives,
- * not even by data dependencies. See the documentation for
- * memory_barrier() for examples and URLs to more information.
- *
- * For example, the following code would force ordering (the initial
- * value of "a" is zero, "b" is one, and "p" is "&a"):
- *
- * <programlisting>
- * CPU 0 CPU 1
- *
- * b = 2;
- * memory_barrier();
- * p = &b; q = p;
- * read_barrier_depends();
- * d = *q;
- * </programlisting>
- *
- * because the read of "*q" depends on the read of "p" and these
- * two reads are separated by a read_barrier_depends(). However,
- * the following code, with the same initial values for "a" and "b":
- *
- * <programlisting>
- * CPU 0 CPU 1
- *
- * a = 2;
- * memory_barrier();
- * b = 3; y = b;
- * read_barrier_depends();
- * x = a;
- * </programlisting>
- *
- * does not enforce ordering, since there is no data dependency between
- * the read of "a" and the read of "b". Therefore, on some CPUs, such
- * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb()
- * in cases like this where there are no data dependencies.
- **/
-
-#define read_barrier_depends() do { } while (0)
-
-#ifdef CONFIG_SMP
-#define smp_mb() mb()
-#ifdef CONFIG_X86_PPRO_FENCE
-# define smp_rmb() rmb()
-#else
-# define smp_rmb() barrier()
-#endif
-#ifdef CONFIG_X86_OOSTORE
-# define smp_wmb() wmb()
-#else
-# define smp_wmb() barrier()
-#endif
-#define smp_read_barrier_depends() read_barrier_depends()
-#define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
-#else
-#define smp_mb() barrier()
-#define smp_rmb() barrier()
-#define smp_wmb() barrier()
-#define smp_read_barrier_depends() do { } while (0)
-#define set_mb(var, value) do { var = value; barrier(); } while (0)
-#endif
-
-/*
- * Stop RDTSC speculation. This is needed when you need to use RDTSC
- * (or get_cycles or vread that possibly accesses the TSC) in a defined
- * code region.
- *
- * (Could use an alternative three way for this if there was one.)
- */
-static inline void rdtsc_barrier(void)
-{
- alternative(ASM_NOP3, "mfence", X86_FEATURE_MFENCE_RDTSC);
- alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC);
-}
-
-#endif /* ASM_X86__SYSTEM_H */
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-18 20:03:12 +0000