1 files changed, 313 insertions, 0 deletions
diff --git a/include/asm-x86/system_32.h b/include/asm-x86/system_32.h
new file mode 100644
index 00000000000..d69ba937e09
--- /dev/null
+++ b/include/asm-x86/system_32.h
@@ -0,0 +1,313 @@
+#ifndef __ASM_SYSTEM_H
+#define __ASM_SYSTEM_H
+
+#include <linux/kernel.h>
+#include <asm/segment.h>
+#include <asm/cpufeature.h>
+#include <asm/cmpxchg.h>
+
+#ifdef __KERNEL__
+
+struct task_struct;	/* one of the stranger aspects of C forward declarations.. */
+extern struct task_struct * FASTCALL(__switch_to(struct task_struct *prev, struct task_struct *next));
+
+/*
+ * Saving eflags is important. It switches not only IOPL between tasks,
+ * it also protects other tasks from NT leaking through sysenter etc.
+ */
+#define switch_to(prev,next,last) do {					\
+	unsigned long esi,edi;						\
+	asm volatile("pushfl\n\t"		/* Save flags */	\
+		     "pushl %%ebp\n\t"					\
+		     "movl %%esp,%0\n\t"	/* save ESP */		\
+		     "movl %5,%%esp\n\t"	/* restore ESP */	\
+		     "movl $1f,%1\n\t"		/* save EIP */		\
+		     "pushl %6\n\t"		/* restore EIP */	\
+		     "jmp __switch_to\n"				\
+		     "1:\t"						\
+		     "popl %%ebp\n\t"					\
+		     "popfl"						\
+		     :"=m" (prev->thread.esp),"=m" (prev->thread.eip),	\
+		      "=a" (last),"=S" (esi),"=D" (edi)			\
+		     :"m" (next->thread.esp),"m" (next->thread.eip),	\
+		      "2" (prev), "d" (next));				\
+} while (0)
+
+#define _set_base(addr,base) do { unsigned long __pr; \
+__asm__ __volatile__ ("movw %%dx,%1\n\t" \
+	"rorl $16,%%edx\n\t" \
+	"movb %%dl,%2\n\t" \
+	"movb %%dh,%3" \
+	:"=&d" (__pr) \
+	:"m" (*((addr)+2)), \
+	 "m" (*((addr)+4)), \
+	 "m" (*((addr)+7)), \
+         "0" (base) \
+        ); } while(0)
+
+#define _set_limit(addr,limit) do { unsigned long __lr; \
+__asm__ __volatile__ ("movw %%dx,%1\n\t" \
+	"rorl $16,%%edx\n\t" \
+	"movb %2,%%dh\n\t" \
+	"andb $0xf0,%%dh\n\t" \
+	"orb %%dh,%%dl\n\t" \
+	"movb %%dl,%2" \
+	:"=&d" (__lr) \
+	:"m" (*(addr)), \
+	 "m" (*((addr)+6)), \
+	 "0" (limit) \
+        ); } while(0)
+
+#define set_base(ldt,base) _set_base( ((char *)&(ldt)) , (base) )
+#define set_limit(ldt,limit) _set_limit( ((char *)&(ldt)) , ((limit)-1) )
+
+/*
+ * Load a segment. Fall back on loading the zero
+ * segment if something goes wrong..
+ */
+#define loadsegment(seg,value)			\
+	asm volatile("\n"			\
+		"1:\t"				\
+		"mov %0,%%" #seg "\n"		\
+		"2:\n"				\
+		".section .fixup,\"ax\"\n"	\
+		"3:\t"				\
+		"pushl $0\n\t"			\
+		"popl %%" #seg "\n\t"		\
+		"jmp 2b\n"			\
+		".previous\n"			\
+		".section __ex_table,\"a\"\n\t"	\
+		".align 4\n\t"			\
+		".long 1b,3b\n"			\
+		".previous"			\
+		: :"rm" (value))
+
+/*
+ * Save a segment register away
+ */
+#define savesegment(seg, value) \
+	asm volatile("mov %%" #seg ",%0":"=rm" (value))
+
+
+static inline void native_clts(void)
+{
+	asm volatile ("clts");
+}
+
+static inline unsigned long native_read_cr0(void)
+{
+	unsigned long val;
+	asm volatile("movl %%cr0,%0\n\t" :"=r" (val));
+	return val;
+}
+
+static inline void native_write_cr0(unsigned long val)
+{
+	asm volatile("movl %0,%%cr0": :"r" (val));
+}
+
+static inline unsigned long native_read_cr2(void)
+{
+	unsigned long val;
+	asm volatile("movl %%cr2,%0\n\t" :"=r" (val));
+	return val;
+}
+
+static inline void native_write_cr2(unsigned long val)
+{
+	asm volatile("movl %0,%%cr2": :"r" (val));
+}
+
+static inline unsigned long native_read_cr3(void)
+{
+	unsigned long val;
+	asm volatile("movl %%cr3,%0\n\t" :"=r" (val));
+	return val;
+}
+
+static inline void native_write_cr3(unsigned long val)
+{
+	asm volatile("movl %0,%%cr3": :"r" (val));
+}
+
+static inline unsigned long native_read_cr4(void)
+{
+	unsigned long val;
+	asm volatile("movl %%cr4,%0\n\t" :"=r" (val));
+	return val;
+}
+
+static inline unsigned long native_read_cr4_safe(void)
+{
+	unsigned long val;
+	/* This could fault if %cr4 does not exist */
+	asm("1: movl %%cr4, %0		\n"
+		"2:				\n"
+		".section __ex_table,\"a\"	\n"
+		".long 1b,2b			\n"
+		".previous			\n"
+		: "=r" (val): "0" (0));
+	return val;
+}
+
+static inline void native_write_cr4(unsigned long val)
+{
+	asm volatile("movl %0,%%cr4": :"r" (val));
+}
+
+static inline void native_wbinvd(void)
+{
+	asm volatile("wbinvd": : :"memory");
+}
+
+
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else
+#define read_cr0()	(native_read_cr0())
+#define write_cr0(x)	(native_write_cr0(x))
+#define read_cr2()	(native_read_cr2())
+#define write_cr2(x)	(native_write_cr2(x))
+#define read_cr3()	(native_read_cr3())
+#define write_cr3(x)	(native_write_cr3(x))
+#define read_cr4()	(native_read_cr4())
+#define read_cr4_safe()	(native_read_cr4_safe())
+#define write_cr4(x)	(native_write_cr4(x))
+#define wbinvd()	(native_wbinvd())
+
+/* Clear the 'TS' bit */
+#define clts()		(native_clts())
+
+#endif/* CONFIG_PARAVIRT */
+
+/* Set the 'TS' bit */
+#define stts() write_cr0(8 | read_cr0())
+
+#endif	/* __KERNEL__ */
+
+static inline unsigned long get_limit(unsigned long segment)
+{
+	unsigned long __limit;
+	__asm__("lsll %1,%0"
+		:"=r" (__limit):"r" (segment));
+	return __limit+1;
+}
+
+#define nop() __asm__ __volatile__ ("nop")
+
+/*
+ * Force strict CPU ordering.
+ * And yes, this is required on UP too when we're talking
+ * to devices.
+ *
+ * For now, "wmb()" doesn't actually do anything, as all
+ * Intel CPU's follow what Intel calls a *Processor Order*,
+ * in which all writes are seen in the program order even
+ * outside the CPU.
+ *
+ * I expect future Intel CPU's to have a weaker ordering,
+ * but I'd also expect them to finally get their act together
+ * and add some real memory barriers if so.
+ *
+ * Some non intel clones support out of order store. wmb() ceases to be a
+ * nop for these.
+ */
+ 
+
+#define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2)
+#define rmb() alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2)
+
+/**
+ * read_barrier_depends - Flush all pending reads that subsequents reads
+ * depend on.
+ *
+ * No data-dependent reads from memory-like regions are ever reordered
+ * over this barrier.  All reads preceding this primitive are guaranteed
+ * to access memory (but not necessarily other CPUs' caches) before any
+ * reads following this primitive that depend on the data return by
+ * any of the preceding reads.  This primitive is much lighter weight than
+ * rmb() on most CPUs, and is never heavier weight than is
+ * rmb().
+ *
+ * These ordering constraints are respected by both the local CPU
+ * and the compiler.
+ *
+ * Ordering is not guaranteed by anything other than these primitives,
+ * not even by data dependencies.  See the documentation for
+ * memory_barrier() for examples and URLs to more information.
+ *
+ * For example, the following code would force ordering (the initial
+ * value of "a" is zero, "b" is one, and "p" is "&a"):
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	b = 2;
+ *	memory_barrier();
+ *	p = &b;				q = p;
+ *					read_barrier_depends();
+ *					d = *q;
+ * </programlisting>
+ *
+ * because the read of "*q" depends on the read of "p" and these
+ * two reads are separated by a read_barrier_depends().  However,
+ * the following code, with the same initial values for "a" and "b":
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	a = 2;
+ *	memory_barrier();
+ *	b = 3;				y = b;
+ *					read_barrier_depends();
+ *					x = a;
+ * </programlisting>
+ *
+ * does not enforce ordering, since there is no data dependency between
+ * the read of "a" and the read of "b".  Therefore, on some CPUs, such
+ * as Alpha, "y" could be set to 3 and "x" to 0.  Use rmb()
+ * in cases like this where there are no data dependencies.
+ **/
+
+#define read_barrier_depends()	do { } while(0)
+
+#ifdef CONFIG_X86_OOSTORE
+/* Actually there are no OOO store capable CPUs for now that do SSE, 
+   but make it already an possibility. */
+#define wmb() alternative("lock; addl $0,0(%%esp)", "sfence", X86_FEATURE_XMM)
+#else
+#define wmb()	__asm__ __volatile__ ("": : :"memory")
+#endif
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
+#define smp_read_barrier_depends()	read_barrier_depends()
+#define set_mb(var, value) do { (void) xchg(&var, value); } while (0)
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while(0)
+#define set_mb(var, value) do { var = value; barrier(); } while (0)
+#endif
+
+#include <linux/irqflags.h>
+
+/*
+ * disable hlt during certain critical i/o operations
+ */
+#define HAVE_DISABLE_HLT
+void disable_hlt(void);
+void enable_hlt(void);
+
+extern int es7000_plat;
+void cpu_idle_wait(void);
+
+extern unsigned long arch_align_stack(unsigned long sp);
+extern void free_init_pages(char *what, unsigned long begin, unsigned long end);
+
+void default_idle(void);
+
+#endif