diff options
Diffstat (limited to 'include/asm-xtensa/xtensa/cacheattrasm.h')
| -rw-r--r-- | include/asm-xtensa/xtensa/cacheattrasm.h | 432 |
1 files changed, 0 insertions, 432 deletions
diff --git a/include/asm-xtensa/xtensa/cacheattrasm.h b/include/asm-xtensa/xtensa/cacheattrasm.h deleted file mode 100644 index 1c3e117b359..00000000000 --- a/include/asm-xtensa/xtensa/cacheattrasm.h +++ /dev/null @@ -1,432 +0,0 @@ -#ifndef XTENSA_CACHEATTRASM_H -#define XTENSA_CACHEATTRASM_H - -/* - * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND - * - * include/asm-xtensa/xtensa/cacheattrasm.h -- assembler-specific - * CACHEATTR register related definitions that depend on CORE - * configuration. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002 Tensilica Inc. - */ - - -#include <xtensa/coreasm.h> - - -/* - * This header file defines assembler macros of the form: - * <x>cacheattr_<func> - * where: - * <x> is 'i', 'd' or absent for instruction, data - * or both caches; and - * <func> indicates the function of the macro. - * - * The following functions are defined: - * - * icacheattr_get - * Reads I-cache CACHEATTR into a2 (clobbers a3-a5). - * - * dcacheattr_get - * Reads D-cache CACHEATTR into a2 (clobbers a3-a5). - * (Note: for configs with a real CACHEATTR register, the - * above two macros are identical.) - * - * cacheattr_set - * Writes both I-cache and D-cache CACHEATTRs from a2 (a3-a8 clobbered). - * Works even when changing one's own code's attributes. - * - * icacheattr_is_enabled label - * Branches to \label if I-cache appears to have been enabled - * (eg. if CACHEATTR contains a cache-enabled attribute). - * (clobbers a2-a5,SAR) - * - * dcacheattr_is_enabled label - * Branches to \label if D-cache appears to have been enabled - * (eg. if CACHEATTR contains a cache-enabled attribute). - * (clobbers a2-a5,SAR) - * - * cacheattr_is_enabled label - * Branches to \label if either I-cache or D-cache appears to have been enabled - * (eg. if CACHEATTR contains a cache-enabled attribute). - * (clobbers a2-a5,SAR) - * - * The following macros are only defined under certain conditions: - * - * icacheattr_set (if XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR) - * Writes I-cache CACHEATTR from a2 (a3-a8 clobbered). - * - * dcacheattr_set (if XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR) - * Writes D-cache CACHEATTR from a2 (a3-a8 clobbered). - */ - - - -/*************************** GENERIC -- ALL CACHES ***************************/ - -/* - * _cacheattr_get - * - * (Internal macro.) - * Returns value of CACHEATTR register (or closest equivalent) in a2. - * - * Entry: - * (none) - * Exit: - * a2 value read from CACHEATTR - * a3-a5 clobbered (temporaries) - */ - .macro _cacheattr_get tlb -#if XCHAL_HAVE_CACHEATTR - rsr a2, CACHEATTR -#elif XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR - // We have a config that "mimics" CACHEATTR using a simplified - // "MMU" composed of a single statically-mapped way. - // DTLB and ITLB are independent, so there's no single - // cache attribute that can describe both. So for now - // just return the DTLB state. - movi a5, 0xE0000000 - movi a2, 0 - movi a3, 0 -1: add a3, a3, a5 // next segment - r&tlb&1 a4, a3 // get PPN+CA of segment at 0xE0000000, 0xC0000000, ..., 0 - dsync // interlock??? - slli a2, a2, 4 - extui a4, a4, 0, 4 // extract CA - or a2, a2, a4 - bnez a3, 1b -#else - // This macro isn't applicable to arbitrary MMU configurations. - // Just return zero. - movi a2, 0 -#endif - .endm - - .macro icacheattr_get - _cacheattr_get itlb - .endm - - .macro dcacheattr_get - _cacheattr_get dtlb - .endm - - -#define XCHAL_CACHEATTR_ALL_BYPASS 0x22222222 /* default (powerup/reset) value of CACHEATTR, all BYPASS - mode (ie. disabled/bypassed caches) */ - -#if XCHAL_HAVE_CACHEATTR || XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR - -#define XCHAL_FCA_ENAMASK 0x001A /* bitmap of fetch attributes that require enabled icache */ -#define XCHAL_LCA_ENAMASK 0x0003 /* bitmap of load attributes that require enabled dcache */ -#define XCHAL_SCA_ENAMASK 0x0003 /* bitmap of store attributes that require enabled dcache */ -#define XCHAL_LSCA_ENAMASK (XCHAL_LCA_ENAMASK|XCHAL_SCA_ENAMASK) /* l/s attrs requiring enabled dcache */ -#define XCHAL_ALLCA_ENAMASK (XCHAL_FCA_ENAMASK|XCHAL_LSCA_ENAMASK) /* all attrs requiring enabled caches */ - -/* - * _cacheattr_is_enabled - * - * (Internal macro.) - * Branches to \label if CACHEATTR in a2 indicates an enabled - * cache, using mask in a3. - * - * Parameters: - * label where to branch to if cache is enabled - * Entry: - * a2 contains CACHEATTR value used to determine whether - * caches are enabled - * a3 16-bit constant where each bit correspond to - * one of the 16 possible CA values (in a CACHEATTR mask); - * CA values that indicate the cache is enabled - * have their corresponding bit set in this mask - * (eg. use XCHAL_xCA_ENAMASK , above) - * Exit: - * a2,a4,a5 clobbered - * SAR clobbered - */ - .macro _cacheattr_is_enabled label - movi a4, 8 // loop 8 times -.Lcaife\@: - extui a5, a2, 0, 4 // get CA nibble - ssr a5 // index into mask according to CA... - srl a5, a3 // ...and get CA's mask bit in a5 bit 0 - bbsi.l a5, 0, \label // if CA indicates cache enabled, jump to label - srli a2, a2, 4 // next nibble - addi a4, a4, -1 - bnez a4, .Lcaife\@ // loop for each nibble - .endm - -#else /* XCHAL_HAVE_CACHEATTR || XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR */ - .macro _cacheattr_is_enabled label - j \label // macro not applicable, assume caches always enabled - .endm -#endif /* XCHAL_HAVE_CACHEATTR || XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR */ - - - -/* - * icacheattr_is_enabled - * - * Branches to \label if I-cache is enabled. - * - * Parameters: - * label where to branch to if icache is enabled - * Entry: - * (none) - * Exit: - * a2-a5, SAR clobbered (temporaries) - */ - .macro icacheattr_is_enabled label -#if XCHAL_HAVE_CACHEATTR || XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR - icacheattr_get - movi a3, XCHAL_FCA_ENAMASK -#endif - _cacheattr_is_enabled \label - .endm - -/* - * dcacheattr_is_enabled - * - * Branches to \label if D-cache is enabled. - * - * Parameters: - * label where to branch to if dcache is enabled - * Entry: - * (none) - * Exit: - * a2-a5, SAR clobbered (temporaries) - */ - .macro dcacheattr_is_enabled label -#if XCHAL_HAVE_CACHEATTR || XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR - dcacheattr_get - movi a3, XCHAL_LSCA_ENAMASK -#endif - _cacheattr_is_enabled \label - .endm - -/* - * cacheattr_is_enabled - * - * Branches to \label if either I-cache or D-cache is enabled. - * - * Parameters: - * label where to branch to if a cache is enabled - * Entry: - * (none) - * Exit: - * a2-a5, SAR clobbered (temporaries) - */ - .macro cacheattr_is_enabled label -#if XCHAL_HAVE_CACHEATTR - rsr a2, CACHEATTR - movi a3, XCHAL_ALLCA_ENAMASK -#elif XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR - icacheattr_get - movi a3, XCHAL_FCA_ENAMASK - _cacheattr_is_enabled \label - dcacheattr_get - movi a3, XCHAL_LSCA_ENAMASK -#endif - _cacheattr_is_enabled \label - .endm - - - -/* - * The ISA does not have a defined way to change the - * instruction cache attributes of the running code, - * ie. of the memory area that encloses the current PC. - * However, each micro-architecture (or class of - * configurations within a micro-architecture) - * provides a way to deal with this issue. - * - * Here are a few macros used to implement the relevant - * approach taken. - */ - -#if XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR - // We have a config that "mimics" CACHEATTR using a simplified - // "MMU" composed of a single statically-mapped way. - -/* - * icacheattr_set - * - * Entry: - * a2 cacheattr value to set - * Exit: - * a2 unchanged - * a3-a8 clobbered (temporaries) - */ - .macro icacheattr_set - - movi a5, 0xE0000000 // mask of upper 3 bits - movi a6, 3f // PC where ITLB is set - movi a3, 0 // start at region 0 (0 .. 7) - and a6, a6, a5 // upper 3 bits of local PC area - mov a7, a2 // copy a2 so it doesn't get clobbered - j 3f - -# if XCHAL_HAVE_XLT_CACHEATTR - // Can do translations, use generic method: -1: sub a6, a3, a5 // address of some other segment - ritlb1 a8, a6 // save its PPN+CA - dsync // interlock?? - witlb a4, a6 // make it translate to this code area - movi a6, 5f // where to jump into it - isync - sub a6, a6, a5 // adjust jump address within that other segment - jx a6 - - // Note that in the following code snippet, which runs at a different virtual - // address than it is assembled for, we avoid using literals (eg. via movi/l32r) - // just in case literals end up in a different 512 MB segment, and we avoid - // instructions that rely on the current PC being what is expected. - // - .align 4 - _j 6f // this is at label '5' minus 4 bytes - .align 4 -5: witlb a4, a3 // we're in other segment, now can write previous segment's CA - isync - add a6, a6, a5 // back to previous segment - addi a6, a6, -4 // next jump label - jx a6 - -6: sub a6, a3, a5 // address of some other segment - witlb a8, a6 // restore PPN+CA of other segment - mov a6, a3 // restore a6 - isync -# else /* XCHAL_HAVE_XLT_CACHEATTR */ - // Use micro-architecture specific method. - // The following 4-instruction sequence is aligned such that - // it all fits within a single I-cache line. Sixteen byte - // alignment is sufficient for this (using XCHAL_ICACHE_LINESIZE - // actually causes problems because that can be greater than - // the alignment of the reset vector, where this macro is often - // invoked, which would cause the linker to align the reset - // vector code away from the reset vector!!). - .align 16 /*XCHAL_ICACHE_LINESIZE*/ -1: _witlb a4, a3 // write wired PTE (CA, no PPN) of 512MB segment to ITLB - _isync - nop - nop -# endif /* XCHAL_HAVE_XLT_CACHEATTR */ - beq a3, a5, 4f // done? - - // Note that in the WITLB loop, we don't do any load/stores - // (may not be an issue here, but it is important in the DTLB case). -2: srli a7, a7, 4 // next CA - sub a3, a3, a5 // next segment (add 0x20000000) -3: -# if XCHAL_HAVE_XLT_CACHEATTR /* if have translation, preserve it */ - ritlb1 a8, a3 // get current PPN+CA of segment - dsync // interlock??? - extui a4, a7, 0, 4 // extract CA to set - srli a8, a8, 4 // clear CA but keep PPN ... - slli a8, a8, 4 // ... - add a4, a4, a8 // combine new CA with PPN to preserve -# else - extui a4, a7, 0, 4 // extract CA -# endif - beq a3, a6, 1b // current PC's region? if so, do it in a safe way - witlb a4, a3 // write wired PTE (CA [+PPN]) of 512MB segment to ITLB - bne a3, a5, 2b - isync // make sure all ifetch changes take effect -4: - .endm // icacheattr_set - - -/* - * dcacheattr_set - * - * Entry: - * a2 cacheattr value to set - * Exit: - * a2 unchanged - * a3-a8 clobbered (temporaries) - */ - - .macro dcacheattr_set - - movi a5, 0xE0000000 // mask of upper 3 bits - movi a3, 0 // start at region 0 (0 .. 7) - mov a7, a2 // copy a2 so it doesn't get clobbered - j 3f - // Note that in the WDTLB loop, we don't do any load/stores - // (including implicit l32r via movi) because it isn't safe. -2: srli a7, a7, 4 // next CA - sub a3, a3, a5 // next segment (add 0x20000000) -3: -# if XCHAL_HAVE_XLT_CACHEATTR /* if have translation, preserve it */ - rdtlb1 a8, a3 // get current PPN+CA of segment - dsync // interlock??? - extui a4, a7, 0, 4 // extract CA to set - srli a8, a8, 4 // clear CA but keep PPN ... - slli a8, a8, 4 // ... - add a4, a4, a8 // combine new CA with PPN to preserve -# else - extui a4, a7, 0, 4 // extract CA to set -# endif - wdtlb a4, a3 // write wired PTE (CA [+PPN]) of 512MB segment to DTLB - bne a3, a5, 2b - dsync // make sure all data path changes take effect - .endm // dcacheattr_set - -#endif /* XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR */ - - - -/* - * cacheattr_set - * - * Macro that sets the current CACHEATTR safely - * (both i and d) according to the current contents of a2. - * It works even when changing the cache attributes of - * the currently running code. - * - * Entry: - * a2 cacheattr value to set - * Exit: - * a2 unchanged - * a3-a8 clobbered (temporaries) - */ - .macro cacheattr_set - -#if XCHAL_HAVE_CACHEATTR -# if XCHAL_ICACHE_LINESIZE < 4 - // No i-cache, so can always safely write to CACHEATTR: - wsr a2, CACHEATTR -# else - // The Athens micro-architecture, when using the old - // exception architecture option (ie. with the CACHEATTR register) - // allows changing the cache attributes of the running code - // using the following exact sequence aligned to be within - // an instruction cache line. (NOTE: using XCHAL_ICACHE_LINESIZE - // alignment actually causes problems because that can be greater - // than the alignment of the reset vector, where this macro is often - // invoked, which would cause the linker to align the reset - // vector code away from the reset vector!!). - j 1f - .align 16 /*XCHAL_ICACHE_LINESIZE*/ // align to within an I-cache line -1: _wsr a2, CACHEATTR - _isync - nop - nop -# endif -#elif XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR - // DTLB and ITLB are independent, but to keep semantics - // of this macro we simply write to both. - icacheattr_set - dcacheattr_set -#else - // This macro isn't applicable to arbitrary MMU configurations. - // Do nothing in this case. -#endif - .endm - - -#endif /*XTENSA_CACHEATTRASM_H*/ - |