diff options
Diffstat (limited to 'include/asm-xtensa/xtensa/config-linux_be/system.h')
| -rw-r--r-- | include/asm-xtensa/xtensa/config-linux_be/system.h | 198 |
1 files changed, 198 insertions, 0 deletions
diff --git a/include/asm-xtensa/xtensa/config-linux_be/system.h b/include/asm-xtensa/xtensa/config-linux_be/system.h new file mode 100644 index 00000000000..cf9d4d308e3 --- /dev/null +++ b/include/asm-xtensa/xtensa/config-linux_be/system.h @@ -0,0 +1,198 @@ +/* + * xtensa/config/system.h -- HAL definitions that are dependent on SYSTEM configuration + * + * NOTE: The location and contents of this file are highly subject to change. + * + * Source for configuration-independent binaries (which link in a + * configuration-specific HAL library) must NEVER include this file. + * The HAL itself has historically included this file in some instances, + * but this is not appropriate either, because the HAL is meant to be + * core-specific but system independent. + */ + +/* + * Copyright (c) 2003 Tensilica, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2.1 of the GNU Lesser General Public + * License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it would be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * Further, this software is distributed without any warranty that it is + * free of the rightful claim of any third person regarding infringement + * or the like. Any license provided herein, whether implied or + * otherwise, applies only to this software file. Patent licenses, if + * any, provided herein do not apply to combinations of this program with + * other software, or any other product whatsoever. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this program; if not, write the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, + * USA. + */ + + +#ifndef XTENSA_CONFIG_SYSTEM_H +#define XTENSA_CONFIG_SYSTEM_H + +/*#include <xtensa/hal.h>*/ + + + +/*---------------------------------------------------------------------- + DEVICE ADDRESSES + ----------------------------------------------------------------------*/ + +/* + * Strange place to find these, but the configuration GUI + * allows moving these around to account for various core + * configurations. Specific boards (and their BSP software) + * will have specific meanings for these components. + */ + +/* I/O Block areas: */ +#define XSHAL_IOBLOCK_CACHED_VADDR 0xE0000000 +#define XSHAL_IOBLOCK_CACHED_PADDR 0xF0000000 +#define XSHAL_IOBLOCK_CACHED_SIZE 0x0E000000 + +#define XSHAL_IOBLOCK_BYPASS_VADDR 0xF0000000 +#define XSHAL_IOBLOCK_BYPASS_PADDR 0xF0000000 +#define XSHAL_IOBLOCK_BYPASS_SIZE 0x0E000000 + +/* System ROM: */ +#define XSHAL_ROM_VADDR 0xEE000000 +#define XSHAL_ROM_PADDR 0xFE000000 +#define XSHAL_ROM_SIZE 0x00400000 +/* Largest available area (free of vectors): */ +#define XSHAL_ROM_AVAIL_VADDR 0xEE00052C +#define XSHAL_ROM_AVAIL_VSIZE 0x003FFAD4 + +/* System RAM: */ +#define XSHAL_RAM_VADDR 0xD0000000 +#define XSHAL_RAM_PADDR 0x00000000 +#define XSHAL_RAM_VSIZE 0x08000000 +#define XSHAL_RAM_PSIZE 0x10000000 +#define XSHAL_RAM_SIZE XSHAL_RAM_PSIZE +/* Largest available area (free of vectors): */ +#define XSHAL_RAM_AVAIL_VADDR 0xD0000370 +#define XSHAL_RAM_AVAIL_VSIZE 0x07FFFC90 + +/* + * Shadow system RAM (same device as system RAM, at different address). + * (Emulation boards need this for the SONIC Ethernet driver + * when data caches are configured for writeback mode.) + * NOTE: on full MMU configs, this points to the BYPASS virtual address + * of system RAM, ie. is the same as XSHAL_RAM_* except that virtual + * addresses are viewed through the BYPASS static map rather than + * the CACHED static map. + */ +#define XSHAL_RAM_BYPASS_VADDR 0xD8000000 +#define XSHAL_RAM_BYPASS_PADDR 0x00000000 +#define XSHAL_RAM_BYPASS_PSIZE 0x08000000 + +/* Alternate system RAM (different device than system RAM): */ +#define XSHAL_ALTRAM_VADDR 0xCEE00000 +#define XSHAL_ALTRAM_PADDR 0xC0000000 +#define XSHAL_ALTRAM_SIZE 0x00200000 + + +/*---------------------------------------------------------------------- + * DEVICE-ADDRESS DEPENDENT... + * + * Values written to CACHEATTR special register (or its equivalent) + * to enable and disable caches in various modes. + *----------------------------------------------------------------------*/ + +/*---------------------------------------------------------------------- + BACKWARD COMPATIBILITY ... + ----------------------------------------------------------------------*/ + +/* + * NOTE: the following two macros are DEPRECATED. Use the latter + * board-specific macros instead, which are specially tuned for the + * particular target environments' memory maps. + */ +#define XSHAL_CACHEATTR_BYPASS XSHAL_XT2000_CACHEATTR_BYPASS /* disable caches in bypass mode */ +#define XSHAL_CACHEATTR_DEFAULT XSHAL_XT2000_CACHEATTR_DEFAULT /* default setting to enable caches (no writeback!) */ + +/*---------------------------------------------------------------------- + ISS (Instruction Set Simulator) SPECIFIC ... + ----------------------------------------------------------------------*/ + +#define XSHAL_ISS_CACHEATTR_WRITEBACK 0x1122222F /* enable caches in write-back mode */ +#define XSHAL_ISS_CACHEATTR_WRITEALLOC 0x1122222F /* enable caches in write-allocate mode */ +#define XSHAL_ISS_CACHEATTR_WRITETHRU 0x1122222F /* enable caches in write-through mode */ +#define XSHAL_ISS_CACHEATTR_BYPASS 0x2222222F /* disable caches in bypass mode */ +#define XSHAL_ISS_CACHEATTR_DEFAULT XSHAL_ISS_CACHEATTR_WRITEBACK /* default setting to enable caches */ + +/* For Coware only: */ +#define XSHAL_COWARE_CACHEATTR_WRITEBACK 0x11222222 /* enable caches in write-back mode */ +#define XSHAL_COWARE_CACHEATTR_WRITEALLOC 0x11222222 /* enable caches in write-allocate mode */ +#define XSHAL_COWARE_CACHEATTR_WRITETHRU 0x11222222 /* enable caches in write-through mode */ +#define XSHAL_COWARE_CACHEATTR_BYPASS 0x22222222 /* disable caches in bypass mode */ +#define XSHAL_COWARE_CACHEATTR_DEFAULT XSHAL_COWARE_CACHEATTR_WRITEBACK /* default setting to enable caches */ + +/* For BFM and other purposes: */ +#define XSHAL_ALLVALID_CACHEATTR_WRITEBACK 0x11222222 /* enable caches without any invalid regions */ +#define XSHAL_ALLVALID_CACHEATTR_DEFAULT XSHAL_ALLVALID_CACHEATTR_WRITEBACK /* default setting for caches without any invalid regions */ + +#define XSHAL_ISS_PIPE_REGIONS 0 +#define XSHAL_ISS_SDRAM_REGIONS 0 + + +/*---------------------------------------------------------------------- + XT2000 BOARD SPECIFIC ... + ----------------------------------------------------------------------*/ + +#define XSHAL_XT2000_CACHEATTR_WRITEBACK 0x22FFFFFF /* enable caches in write-back mode */ +#define XSHAL_XT2000_CACHEATTR_WRITEALLOC 0x22FFFFFF /* enable caches in write-allocate mode */ +#define XSHAL_XT2000_CACHEATTR_WRITETHRU 0x22FFFFFF /* enable caches in write-through mode */ +#define XSHAL_XT2000_CACHEATTR_BYPASS 0x22FFFFFF /* disable caches in bypass mode */ +#define XSHAL_XT2000_CACHEATTR_DEFAULT XSHAL_XT2000_CACHEATTR_WRITEBACK /* default setting to enable caches */ + +#define XSHAL_XT2000_PIPE_REGIONS 0x00001000 /* BusInt pipeline regions */ +#define XSHAL_XT2000_SDRAM_REGIONS 0x00000005 /* BusInt SDRAM regions */ + + +/*---------------------------------------------------------------------- + VECTOR SIZES + ----------------------------------------------------------------------*/ + +/* + * Sizes allocated to vectors by the system (memory map) configuration. + * These sizes are constrained by core configuration (eg. one vector's + * code cannot overflow into another vector) but are dependent on the + * system or board (or LSP) memory map configuration. + * + * Whether or not each vector happens to be in a system ROM is also + * a system configuration matter, sometimes useful, included here also: + */ +#define XSHAL_RESET_VECTOR_SIZE 0x000004E0 +#define XSHAL_RESET_VECTOR_ISROM 1 +#define XSHAL_USER_VECTOR_SIZE 0x0000001C +#define XSHAL_USER_VECTOR_ISROM 0 +#define XSHAL_PROGRAMEXC_VECTOR_SIZE XSHAL_USER_VECTOR_SIZE /* for backward compatibility */ +#define XSHAL_USEREXC_VECTOR_SIZE XSHAL_USER_VECTOR_SIZE /* for backward compatibility */ +#define XSHAL_KERNEL_VECTOR_SIZE 0x0000001C +#define XSHAL_KERNEL_VECTOR_ISROM 0 +#define XSHAL_STACKEDEXC_VECTOR_SIZE XSHAL_KERNEL_VECTOR_SIZE /* for backward compatibility */ +#define XSHAL_KERNELEXC_VECTOR_SIZE XSHAL_KERNEL_VECTOR_SIZE /* for backward compatibility */ +#define XSHAL_DOUBLEEXC_VECTOR_SIZE 0x000000E0 +#define XSHAL_DOUBLEEXC_VECTOR_ISROM 0 +#define XSHAL_WINDOW_VECTORS_SIZE 0x00000180 +#define XSHAL_WINDOW_VECTORS_ISROM 0 +#define XSHAL_INTLEVEL2_VECTOR_SIZE 0x0000000C +#define XSHAL_INTLEVEL2_VECTOR_ISROM 0 +#define XSHAL_INTLEVEL3_VECTOR_SIZE 0x0000000C +#define XSHAL_INTLEVEL3_VECTOR_ISROM 0 +#define XSHAL_INTLEVEL4_VECTOR_SIZE 0x0000000C +#define XSHAL_INTLEVEL4_VECTOR_ISROM 1 +#define XSHAL_DEBUG_VECTOR_SIZE XSHAL_INTLEVEL4_VECTOR_SIZE +#define XSHAL_DEBUG_VECTOR_ISROM XSHAL_INTLEVEL4_VECTOR_ISROM + + +#endif /*XTENSA_CONFIG_SYSTEM_H*/ + |