diff options
Diffstat (limited to 'include/linux/amba/serial.h')
| -rw-r--r-- | include/linux/amba/serial.h | 161 |
1 files changed, 161 insertions, 0 deletions
diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h new file mode 100644 index 00000000000..dc726ffcceb --- /dev/null +++ b/include/linux/amba/serial.h @@ -0,0 +1,161 @@ +/* + * linux/include/asm-arm/hardware/serial_amba.h + * + * Internal header file for AMBA serial ports + * + * Copyright (C) ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef ASM_ARM_HARDWARE_SERIAL_AMBA_H +#define ASM_ARM_HARDWARE_SERIAL_AMBA_H + +/* ------------------------------------------------------------------------------- + * From AMBA UART (PL010) Block Specification + * ------------------------------------------------------------------------------- + * UART Register Offsets. + */ +#define UART01x_DR 0x00 /* Data read or written from the interface. */ +#define UART01x_RSR 0x04 /* Receive status register (Read). */ +#define UART01x_ECR 0x04 /* Error clear register (Write). */ +#define UART010_LCRH 0x08 /* Line control register, high byte. */ +#define UART010_LCRM 0x0C /* Line control register, middle byte. */ +#define UART010_LCRL 0x10 /* Line control register, low byte. */ +#define UART010_CR 0x14 /* Control register. */ +#define UART01x_FR 0x18 /* Flag register (Read only). */ +#define UART010_IIR 0x1C /* Interrupt indentification register (Read). */ +#define UART010_ICR 0x1C /* Interrupt clear register (Write). */ +#define UART01x_ILPR 0x20 /* IrDA low power counter register. */ +#define UART011_IBRD 0x24 /* Integer baud rate divisor register. */ +#define UART011_FBRD 0x28 /* Fractional baud rate divisor register. */ +#define UART011_LCRH 0x2c /* Line control register. */ +#define UART011_CR 0x30 /* Control register. */ +#define UART011_IFLS 0x34 /* Interrupt fifo level select. */ +#define UART011_IMSC 0x38 /* Interrupt mask. */ +#define UART011_RIS 0x3c /* Raw interrupt status. */ +#define UART011_MIS 0x40 /* Masked interrupt status. */ +#define UART011_ICR 0x44 /* Interrupt clear register. */ +#define UART011_DMACR 0x48 /* DMA control register. */ + +#define UART011_DR_OE (1 << 11) +#define UART011_DR_BE (1 << 10) +#define UART011_DR_PE (1 << 9) +#define UART011_DR_FE (1 << 8) + +#define UART01x_RSR_OE 0x08 +#define UART01x_RSR_BE 0x04 +#define UART01x_RSR_PE 0x02 +#define UART01x_RSR_FE 0x01 + +#define UART011_FR_RI 0x100 +#define UART011_FR_TXFE 0x080 +#define UART011_FR_RXFF 0x040 +#define UART01x_FR_TXFF 0x020 +#define UART01x_FR_RXFE 0x010 +#define UART01x_FR_BUSY 0x008 +#define UART01x_FR_DCD 0x004 +#define UART01x_FR_DSR 0x002 +#define UART01x_FR_CTS 0x001 +#define UART01x_FR_TMSK (UART01x_FR_TXFF + UART01x_FR_BUSY) + +#define UART011_CR_CTSEN 0x8000 /* CTS hardware flow control */ +#define UART011_CR_RTSEN 0x4000 /* RTS hardware flow control */ +#define UART011_CR_OUT2 0x2000 /* OUT2 */ +#define UART011_CR_OUT1 0x1000 /* OUT1 */ +#define UART011_CR_RTS 0x0800 /* RTS */ +#define UART011_CR_DTR 0x0400 /* DTR */ +#define UART011_CR_RXE 0x0200 /* receive enable */ +#define UART011_CR_TXE 0x0100 /* transmit enable */ +#define UART011_CR_LBE 0x0080 /* loopback enable */ +#define UART010_CR_RTIE 0x0040 +#define UART010_CR_TIE 0x0020 +#define UART010_CR_RIE 0x0010 +#define UART010_CR_MSIE 0x0008 +#define UART01x_CR_IIRLP 0x0004 /* SIR low power mode */ +#define UART01x_CR_SIREN 0x0002 /* SIR enable */ +#define UART01x_CR_UARTEN 0x0001 /* UART enable */ + +#define UART011_LCRH_SPS 0x80 +#define UART01x_LCRH_WLEN_8 0x60 +#define UART01x_LCRH_WLEN_7 0x40 +#define UART01x_LCRH_WLEN_6 0x20 +#define UART01x_LCRH_WLEN_5 0x00 +#define UART01x_LCRH_FEN 0x10 +#define UART01x_LCRH_STP2 0x08 +#define UART01x_LCRH_EPS 0x04 +#define UART01x_LCRH_PEN 0x02 +#define UART01x_LCRH_BRK 0x01 + +#define UART010_IIR_RTIS 0x08 +#define UART010_IIR_TIS 0x04 +#define UART010_IIR_RIS 0x02 +#define UART010_IIR_MIS 0x01 + +#define UART011_IFLS_RX1_8 (0 << 3) +#define UART011_IFLS_RX2_8 (1 << 3) +#define UART011_IFLS_RX4_8 (2 << 3) +#define UART011_IFLS_RX6_8 (3 << 3) +#define UART011_IFLS_RX7_8 (4 << 3) +#define UART011_IFLS_TX1_8 (0 << 0) +#define UART011_IFLS_TX2_8 (1 << 0) +#define UART011_IFLS_TX4_8 (2 << 0) +#define UART011_IFLS_TX6_8 (3 << 0) +#define UART011_IFLS_TX7_8 (4 << 0) + +#define UART011_OEIM (1 << 10) /* overrun error interrupt mask */ +#define UART011_BEIM (1 << 9) /* break error interrupt mask */ +#define UART011_PEIM (1 << 8) /* parity error interrupt mask */ +#define UART011_FEIM (1 << 7) /* framing error interrupt mask */ +#define UART011_RTIM (1 << 6) /* receive timeout interrupt mask */ +#define UART011_TXIM (1 << 5) /* transmit interrupt mask */ +#define UART011_RXIM (1 << 4) /* receive interrupt mask */ +#define UART011_DSRMIM (1 << 3) /* DSR interrupt mask */ +#define UART011_DCDMIM (1 << 2) /* DCD interrupt mask */ +#define UART011_CTSMIM (1 << 1) /* CTS interrupt mask */ +#define UART011_RIMIM (1 << 0) /* RI interrupt mask */ + +#define UART011_OEIS (1 << 10) /* overrun error interrupt status */ +#define UART011_BEIS (1 << 9) /* break error interrupt status */ +#define UART011_PEIS (1 << 8) /* parity error interrupt status */ +#define UART011_FEIS (1 << 7) /* framing error interrupt status */ +#define UART011_RTIS (1 << 6) /* receive timeout interrupt status */ +#define UART011_TXIS (1 << 5) /* transmit interrupt status */ +#define UART011_RXIS (1 << 4) /* receive interrupt status */ +#define UART011_DSRMIS (1 << 3) /* DSR interrupt status */ +#define UART011_DCDMIS (1 << 2) /* DCD interrupt status */ +#define UART011_CTSMIS (1 << 1) /* CTS interrupt status */ +#define UART011_RIMIS (1 << 0) /* RI interrupt status */ + +#define UART011_OEIC (1 << 10) /* overrun error interrupt clear */ +#define UART011_BEIC (1 << 9) /* break error interrupt clear */ +#define UART011_PEIC (1 << 8) /* parity error interrupt clear */ +#define UART011_FEIC (1 << 7) /* framing error interrupt clear */ +#define UART011_RTIC (1 << 6) /* receive timeout interrupt clear */ +#define UART011_TXIC (1 << 5) /* transmit interrupt clear */ +#define UART011_RXIC (1 << 4) /* receive interrupt clear */ +#define UART011_DSRMIC (1 << 3) /* DSR interrupt clear */ +#define UART011_DCDMIC (1 << 2) /* DCD interrupt clear */ +#define UART011_CTSMIC (1 << 1) /* CTS interrupt clear */ +#define UART011_RIMIC (1 << 0) /* RI interrupt clear */ + +#define UART011_DMAONERR (1 << 2) /* disable dma on error */ +#define UART011_TXDMAE (1 << 1) /* enable transmit dma */ +#define UART011_RXDMAE (1 << 0) /* enable receive dma */ + +#define UART01x_RSR_ANY (UART01x_RSR_OE|UART01x_RSR_BE|UART01x_RSR_PE|UART01x_RSR_FE) +#define UART01x_FR_MODEM_ANY (UART01x_FR_DCD|UART01x_FR_DSR|UART01x_FR_CTS) + +#endif |