diff options
Diffstat (limited to 'include/linux/amba')
| -rw-r--r-- | include/linux/amba/pl08x.h | 99 |
1 files changed, 50 insertions, 49 deletions
diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 521a0f8974a..3111385b8ca 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -12,7 +12,6 @@ * * Please credit ARM.com * Documentation: ARM DDI 0196D - * */ #ifndef AMBA_PL08X_H @@ -22,6 +21,15 @@ #include <linux/dmaengine.h> #include <linux/interrupt.h> +struct pl08x_lli; +struct pl08x_driver_data; + +/* Bitmasks for selecting AHB ports for DMA transfers */ +enum { + PL08X_AHB1 = (1 << 0), + PL08X_AHB2 = (1 << 1) +}; + /** * struct pl08x_channel_data - data structure to pass info between * platform and PL08x driver regarding channel configuration @@ -46,8 +54,10 @@ * @circular_buffer: whether the buffer passed in is circular and * shall simply be looped round round (like a record baby round * round round round) - * @single: the device connected to this channel will request single - * DMA transfers, not bursts. (Bursts are default.) + * @single: the device connected to this channel will request single DMA + * transfers, not bursts. (Bursts are default.) + * @periph_buses: the device connected to this channel is accessible via + * these buses (use PL08X_AHB1 | PL08X_AHB2). */ struct pl08x_channel_data { char *bus_id; @@ -55,10 +65,10 @@ struct pl08x_channel_data { int max_signal; u32 muxval; u32 cctl; - u32 ccfg; dma_addr_t addr; bool circular_buffer; bool single; + u8 periph_buses; }; /** @@ -67,24 +77,23 @@ struct pl08x_channel_data { * @addr: current address * @maxwidth: the maximum width of a transfer on this bus * @buswidth: the width of this bus in bytes: 1, 2 or 4 - * @fill_bytes: bytes required to fill to the next bus memory - * boundary + * @fill_bytes: bytes required to fill to the next bus memory boundary */ struct pl08x_bus_data { dma_addr_t addr; u8 maxwidth; u8 buswidth; - u32 fill_bytes; + size_t fill_bytes; }; /** * struct pl08x_phy_chan - holder for the physical channels * @id: physical index to this channel * @lock: a lock to use when altering an instance of this struct - * @signal: the physical signal (aka channel) serving this - * physical channel right now - * @serving: the virtual channel currently being served by this - * physical channel + * @signal: the physical signal (aka channel) serving this physical channel + * right now + * @serving: the virtual channel currently being served by this physical + * channel */ struct pl08x_phy_chan { unsigned int id; @@ -92,11 +101,6 @@ struct pl08x_phy_chan { spinlock_t lock; int signal; struct pl08x_dma_chan *serving; - u32 csrc; - u32 cdst; - u32 clli; - u32 cctl; - u32 ccfg; }; /** @@ -108,26 +112,23 @@ struct pl08x_txd { struct dma_async_tx_descriptor tx; struct list_head node; enum dma_data_direction direction; - struct pl08x_bus_data srcbus; - struct pl08x_bus_data dstbus; - int len; + dma_addr_t src_addr; + dma_addr_t dst_addr; + size_t len; dma_addr_t llis_bus; - void *llis_va; - struct pl08x_channel_data *cd; - bool active; + struct pl08x_lli *llis_va; + /* Default cctl value for LLIs */ + u32 cctl; /* * Settings to be put into the physical channel when we - * trigger this txd + * trigger this txd. Other registers are in llis_va[0]. */ - u32 csrc; - u32 cdst; - u32 clli; - u32 cctl; + u32 ccfg; }; /** - * struct pl08x_dma_chan_state - holds the PL08x specific virtual - * channel states + * struct pl08x_dma_chan_state - holds the PL08x specific virtual channel + * states * @PL08X_CHAN_IDLE: the channel is idle * @PL08X_CHAN_RUNNING: the channel has allocated a physical transport * channel and is running a transfer on it @@ -147,6 +148,8 @@ enum pl08x_dma_chan_state { * struct pl08x_dma_chan - this structure wraps a DMA ENGINE channel * @chan: wrappped abstract channel * @phychan: the physical channel utilized by this channel, if there is one + * @phychan_hold: if non-zero, hold on to the physical channel even if we + * have no pending entries * @tasklet: tasklet scheduled by the IRQ to handle actual work etc * @name: name of channel * @cd: channel platform data @@ -154,53 +157,49 @@ enum pl08x_dma_chan_state { * @runtime_direction: current direction of this channel according to * runtime config * @lc: last completed transaction on this channel - * @desc_list: queued transactions pending on this channel + * @pend_list: queued transactions pending on this channel * @at: active transaction on this channel - * @lockflags: sometimes we let a lock last between two function calls, - * especially prep/submit, and then we need to store the IRQ flags - * in the channel state, here * @lock: a lock for this channel data * @host: a pointer to the host (internal use) * @state: whether the channel is idle, paused, running etc * @slave: whether this channel is a device (slave) or for memcpy - * @waiting: a TX descriptor on this channel which is waiting for - * a physical channel to become available + * @waiting: a TX descriptor on this channel which is waiting for a physical + * channel to become available */ struct pl08x_dma_chan { struct dma_chan chan; struct pl08x_phy_chan *phychan; + int phychan_hold; struct tasklet_struct tasklet; char *name; struct pl08x_channel_data *cd; dma_addr_t runtime_addr; enum dma_data_direction runtime_direction; - atomic_t last_issued; dma_cookie_t lc; - struct list_head desc_list; + struct list_head pend_list; struct pl08x_txd *at; - unsigned long lockflags; spinlock_t lock; - void *host; + struct pl08x_driver_data *host; enum pl08x_dma_chan_state state; bool slave; struct pl08x_txd *waiting; }; /** - * struct pl08x_platform_data - the platform configuration for the - * PL08x PrimeCells. + * struct pl08x_platform_data - the platform configuration for the PL08x + * PrimeCells. * @slave_channels: the channels defined for the different devices on the * platform, all inclusive, including multiplexed channels. The available - * physical channels will be multiplexed around these signals as they - * are requested, just enumerate all possible channels. - * @get_signal: request a physical signal to be used for a DMA - * transfer immediately: if there is some multiplexing or similar blocking - * the use of the channel the transfer can be denied by returning - * less than zero, else it returns the allocated signal number + * physical channels will be multiplexed around these signals as they are + * requested, just enumerate all possible channels. + * @get_signal: request a physical signal to be used for a DMA transfer + * immediately: if there is some multiplexing or similar blocking the use + * of the channel the transfer can be denied by returning less than zero, + * else it returns the allocated signal number * @put_signal: indicate to the platform that this physical signal is not * running any DMA transfer and multiplexing can be recycled - * @bus_bit_lli: Bit[0] of the address indicated which AHB bus master the - * LLI addresses are on 0/1 Master 1/2. + * @lli_buses: buses which LLIs can be fetched from: PL08X_AHB1 | PL08X_AHB2 + * @mem_buses: buses which memory can be accessed from: PL08X_AHB1 | PL08X_AHB2 */ struct pl08x_platform_data { struct pl08x_channel_data *slave_channels; @@ -208,6 +207,8 @@ struct pl08x_platform_data { struct pl08x_channel_data memcpy_channel; int (*get_signal)(struct pl08x_dma_chan *); void (*put_signal)(struct pl08x_dma_chan *); + u8 lli_buses; + u8 mem_buses; }; #ifdef CONFIG_AMBA_PL08X |