diff options
Diffstat (limited to 'include/linux/amba')
-rw-r--r-- | include/linux/amba/pl08x.h | 43 |
1 files changed, 20 insertions, 23 deletions
diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 5b87b6aac3f..3111385b8ca 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -12,7 +12,6 @@ * * Please credit ARM.com * Documentation: ARM DDI 0196D - * */ #ifndef AMBA_PL08X_H @@ -55,8 +54,8 @@ enum { * @circular_buffer: whether the buffer passed in is circular and * shall simply be looped round round (like a record baby round * round round round) - * @single: the device connected to this channel will request single - * DMA transfers, not bursts. (Bursts are default.) + * @single: the device connected to this channel will request single DMA + * transfers, not bursts. (Bursts are default.) * @periph_buses: the device connected to this channel is accessible via * these buses (use PL08X_AHB1 | PL08X_AHB2). */ @@ -78,8 +77,7 @@ struct pl08x_channel_data { * @addr: current address * @maxwidth: the maximum width of a transfer on this bus * @buswidth: the width of this bus in bytes: 1, 2 or 4 - * @fill_bytes: bytes required to fill to the next bus memory - * boundary + * @fill_bytes: bytes required to fill to the next bus memory boundary */ struct pl08x_bus_data { dma_addr_t addr; @@ -92,10 +90,10 @@ struct pl08x_bus_data { * struct pl08x_phy_chan - holder for the physical channels * @id: physical index to this channel * @lock: a lock to use when altering an instance of this struct - * @signal: the physical signal (aka channel) serving this - * physical channel right now - * @serving: the virtual channel currently being served by this - * physical channel + * @signal: the physical signal (aka channel) serving this physical channel + * right now + * @serving: the virtual channel currently being served by this physical + * channel */ struct pl08x_phy_chan { unsigned int id; @@ -119,7 +117,6 @@ struct pl08x_txd { size_t len; dma_addr_t llis_bus; struct pl08x_lli *llis_va; - bool active; /* Default cctl value for LLIs */ u32 cctl; /* @@ -130,8 +127,8 @@ struct pl08x_txd { }; /** - * struct pl08x_dma_chan_state - holds the PL08x specific virtual - * channel states + * struct pl08x_dma_chan_state - holds the PL08x specific virtual channel + * states * @PL08X_CHAN_IDLE: the channel is idle * @PL08X_CHAN_RUNNING: the channel has allocated a physical transport * channel and is running a transfer on it @@ -152,7 +149,7 @@ enum pl08x_dma_chan_state { * @chan: wrappped abstract channel * @phychan: the physical channel utilized by this channel, if there is one * @phychan_hold: if non-zero, hold on to the physical channel even if we - * have no pending entries + * have no pending entries * @tasklet: tasklet scheduled by the IRQ to handle actual work etc * @name: name of channel * @cd: channel platform data @@ -166,8 +163,8 @@ enum pl08x_dma_chan_state { * @host: a pointer to the host (internal use) * @state: whether the channel is idle, paused, running etc * @slave: whether this channel is a device (slave) or for memcpy - * @waiting: a TX descriptor on this channel which is waiting for - * a physical channel to become available + * @waiting: a TX descriptor on this channel which is waiting for a physical + * channel to become available */ struct pl08x_dma_chan { struct dma_chan chan; @@ -189,16 +186,16 @@ struct pl08x_dma_chan { }; /** - * struct pl08x_platform_data - the platform configuration for the - * PL08x PrimeCells. + * struct pl08x_platform_data - the platform configuration for the PL08x + * PrimeCells. * @slave_channels: the channels defined for the different devices on the * platform, all inclusive, including multiplexed channels. The available - * physical channels will be multiplexed around these signals as they - * are requested, just enumerate all possible channels. - * @get_signal: request a physical signal to be used for a DMA - * transfer immediately: if there is some multiplexing or similar blocking - * the use of the channel the transfer can be denied by returning - * less than zero, else it returns the allocated signal number + * physical channels will be multiplexed around these signals as they are + * requested, just enumerate all possible channels. + * @get_signal: request a physical signal to be used for a DMA transfer + * immediately: if there is some multiplexing or similar blocking the use + * of the channel the transfer can be denied by returning less than zero, + * else it returns the allocated signal number * @put_signal: indicate to the platform that this physical signal is not * running any DMA transfer and multiplexing can be recycled * @lli_buses: buses which LLIs can be fetched from: PL08X_AHB1 | PL08X_AHB2 |