diff options
Diffstat (limited to 'include/linux/bcma')
| -rw-r--r-- | include/linux/bcma/bcma_driver_chipcommon.h | 85 | ||||
| -rw-r--r-- | include/linux/bcma/bcma_regs.h | 2 |
2 files changed, 87 insertions, 0 deletions
diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index 3c80885fa82..fcb06fb284e 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -94,6 +94,7 @@ #define BCMA_CC_CHIPST_4706_SFLASH_TYPE BIT(2) /* 0: 8b-p/ST-s flash, 1: 16b-p/Atmal-s flash */ #define BCMA_CC_CHIPST_4706_MIPS_BENDIAN BIT(3) /* 0: little, 1: big endian */ #define BCMA_CC_CHIPST_4706_PCIE1_DISABLE BIT(5) /* PCIE1 enable strap pin */ +#define BCMA_CC_CHIPST_5357_NAND_BOOT BIT(4) /* NAND boot, valid for CC rev 38 and/or BCM5357 */ #define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */ #define BCMA_CC_JCMD_START 0x80000000 #define BCMA_CC_JCMD_BUSY 0x80000000 @@ -260,6 +261,29 @@ #define BCMA_CC_SROM_CONTROL_SIZE_16K 0x00000004 #define BCMA_CC_SROM_CONTROL_SIZE_SHIFT 1 #define BCMA_CC_SROM_CONTROL_PRESENT 0x00000001 +/* Block 0x140 - 0x190 registers are chipset specific */ +#define BCMA_CC_4706_FLASHSCFG 0x18C /* Flash struct configuration */ +#define BCMA_CC_4706_FLASHSCFG_MASK 0x000000ff +#define BCMA_CC_4706_FLASHSCFG_SF1 0x00000001 /* 2nd serial flash present */ +#define BCMA_CC_4706_FLASHSCFG_PF1 0x00000002 /* 2nd parallel flash present */ +#define BCMA_CC_4706_FLASHSCFG_SF1_TYPE 0x00000004 /* 2nd serial flash type : 0 : ST, 1 : Atmel */ +#define BCMA_CC_4706_FLASHSCFG_NF1 0x00000008 /* 2nd NAND flash present */ +#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_MASK 0x000000f0 +#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_4MB 0x00000010 /* 4MB */ +#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_8MB 0x00000020 /* 8MB */ +#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_16MB 0x00000030 /* 16MB */ +#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_32MB 0x00000040 /* 32MB */ +#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_64MB 0x00000050 /* 64MB */ +#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_128MB 0x00000060 /* 128MB */ +#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_256MB 0x00000070 /* 256MB */ +/* NAND flash registers for BCM4706 (corerev = 31) */ +#define BCMA_CC_NFLASH_CTL 0x01A0 +#define BCMA_CC_NFLASH_CTL_ERR 0x08000000 +#define BCMA_CC_NFLASH_CONF 0x01A4 +#define BCMA_CC_NFLASH_COL_ADDR 0x01A8 +#define BCMA_CC_NFLASH_ROW_ADDR 0x01AC +#define BCMA_CC_NFLASH_DATA 0x01B0 +#define BCMA_CC_NFLASH_WAITCNT0 0x01B4 /* 0x1E0 is defined as shared BCMA_CLKCTLST */ #define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ #define BCMA_CC_UART0_DATA 0x0300 @@ -319,6 +343,60 @@ #define BCMA_CC_PLLCTL_ADDR 0x0660 #define BCMA_CC_PLLCTL_DATA 0x0664 #define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ +/* NAND flash MLC controller registers (corerev >= 38) */ +#define BCMA_CC_NAND_REVISION 0x0C00 +#define BCMA_CC_NAND_CMD_START 0x0C04 +#define BCMA_CC_NAND_CMD_ADDR_X 0x0C08 +#define BCMA_CC_NAND_CMD_ADDR 0x0C0C +#define BCMA_CC_NAND_CMD_END_ADDR 0x0C10 +#define BCMA_CC_NAND_CS_NAND_SELECT 0x0C14 +#define BCMA_CC_NAND_CS_NAND_XOR 0x0C18 +#define BCMA_CC_NAND_SPARE_RD0 0x0C20 +#define BCMA_CC_NAND_SPARE_RD4 0x0C24 +#define BCMA_CC_NAND_SPARE_RD8 0x0C28 +#define BCMA_CC_NAND_SPARE_RD12 0x0C2C +#define BCMA_CC_NAND_SPARE_WR0 0x0C30 +#define BCMA_CC_NAND_SPARE_WR4 0x0C34 +#define BCMA_CC_NAND_SPARE_WR8 0x0C38 +#define BCMA_CC_NAND_SPARE_WR12 0x0C3C +#define BCMA_CC_NAND_ACC_CONTROL 0x0C40 +#define BCMA_CC_NAND_CONFIG 0x0C48 +#define BCMA_CC_NAND_TIMING_1 0x0C50 +#define BCMA_CC_NAND_TIMING_2 0x0C54 +#define BCMA_CC_NAND_SEMAPHORE 0x0C58 +#define BCMA_CC_NAND_DEVID 0x0C60 +#define BCMA_CC_NAND_DEVID_X 0x0C64 +#define BCMA_CC_NAND_BLOCK_LOCK_STATUS 0x0C68 +#define BCMA_CC_NAND_INTFC_STATUS 0x0C6C +#define BCMA_CC_NAND_ECC_CORR_ADDR_X 0x0C70 +#define BCMA_CC_NAND_ECC_CORR_ADDR 0x0C74 +#define BCMA_CC_NAND_ECC_UNC_ADDR_X 0x0C78 +#define BCMA_CC_NAND_ECC_UNC_ADDR 0x0C7C +#define BCMA_CC_NAND_READ_ERROR_COUNT 0x0C80 +#define BCMA_CC_NAND_CORR_STAT_THRESHOLD 0x0C84 +#define BCMA_CC_NAND_READ_ADDR_X 0x0C90 +#define BCMA_CC_NAND_READ_ADDR 0x0C94 +#define BCMA_CC_NAND_PAGE_PROGRAM_ADDR_X 0x0C98 +#define BCMA_CC_NAND_PAGE_PROGRAM_ADDR 0x0C9C +#define BCMA_CC_NAND_COPY_BACK_ADDR_X 0x0CA0 +#define BCMA_CC_NAND_COPY_BACK_ADDR 0x0CA4 +#define BCMA_CC_NAND_BLOCK_ERASE_ADDR_X 0x0CA8 +#define BCMA_CC_NAND_BLOCK_ERASE_ADDR 0x0CAC +#define BCMA_CC_NAND_INV_READ_ADDR_X 0x0CB0 +#define BCMA_CC_NAND_INV_READ_ADDR 0x0CB4 +#define BCMA_CC_NAND_BLK_WR_PROTECT 0x0CC0 +#define BCMA_CC_NAND_ACC_CONTROL_CS1 0x0CD0 +#define BCMA_CC_NAND_CONFIG_CS1 0x0CD4 +#define BCMA_CC_NAND_TIMING_1_CS1 0x0CD8 +#define BCMA_CC_NAND_TIMING_2_CS1 0x0CDC +#define BCMA_CC_NAND_SPARE_RD16 0x0D30 +#define BCMA_CC_NAND_SPARE_RD20 0x0D34 +#define BCMA_CC_NAND_SPARE_RD24 0x0D38 +#define BCMA_CC_NAND_SPARE_RD28 0x0D3C +#define BCMA_CC_NAND_CACHE_ADDR 0x0D40 +#define BCMA_CC_NAND_CACHE_DATA 0x0D44 +#define BCMA_CC_NAND_CTRL_CONFIG 0x0D48 +#define BCMA_CC_NAND_CTRL_STATUS 0x0D4C /* Divider allocation in 4716/47162/5356 */ #define BCMA_CC_PMU5_MAINPLL_CPU 1 @@ -409,6 +487,13 @@ /* 4313 Chip specific ChipControl register bits */ #define BCMA_CCTRL_4313_12MA_LED_DRIVE 0x00000007 /* 12 mA drive strengh for later 4313 */ +/* BCM5357 ChipControl register bits */ +#define BCMA_CHIPCTL_5357_EXTPA BIT(14) +#define BCMA_CHIPCTL_5357_ANT_MUX_2O3 BIT(15) +#define BCMA_CHIPCTL_5357_NFLASH BIT(16) +#define BCMA_CHIPCTL_5357_I2S_PINS_ENABLE BIT(18) +#define BCMA_CHIPCTL_5357_I2CSPI_PINS_ENABLE BIT(19) + /* Data for the PMU, if available. * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) */ diff --git a/include/linux/bcma/bcma_regs.h b/include/linux/bcma/bcma_regs.h index 5a71d571964..a393e82bf7b 100644 --- a/include/linux/bcma/bcma_regs.h +++ b/include/linux/bcma/bcma_regs.h @@ -11,11 +11,13 @@ #define BCMA_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */ #define BCMA_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */ #define BCMA_CLKCTLST_EXTRESREQ 0x00000700 /* Mask of external resource requests */ +#define BCMA_CLKCTLST_EXTRESREQ_SHIFT 8 #define BCMA_CLKCTLST_HAVEALP 0x00010000 /* ALP available */ #define BCMA_CLKCTLST_HAVEHT 0x00020000 /* HT available */ #define BCMA_CLKCTLST_BP_ON_ALP 0x00040000 /* RO: running on ALP clock */ #define BCMA_CLKCTLST_BP_ON_HT 0x00080000 /* RO: running on HT clock */ #define BCMA_CLKCTLST_EXTRESST 0x07000000 /* Mask of external resource status */ +#define BCMA_CLKCTLST_EXTRESST_SHIFT 24 /* Is there any BCM4328 on BCMA bus? */ #define BCMA_CLKCTLST_4328A0_HAVEHT 0x00010000 /* 4328a0 has reversed bits */ #define BCMA_CLKCTLST_4328A0_HAVEALP 0x00020000 /* 4328a0 has reversed bits */ |