diff options
Diffstat (limited to 'include/linux/cb710.h')
| -rw-r--r-- | include/linux/cb710.h | 238 |
1 files changed, 238 insertions, 0 deletions
diff --git a/include/linux/cb710.h b/include/linux/cb710.h new file mode 100644 index 00000000000..c3819e1ce1c --- /dev/null +++ b/include/linux/cb710.h @@ -0,0 +1,238 @@ +/* + * cb710/cb710.h + * + * Copyright by Michał Mirosław, 2008-2009 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef LINUX_CB710_DRIVER_H +#define LINUX_CB710_DRIVER_H + +#ifdef CONFIG_CB710_DEBUG +#define DEBUG +#endif + +/* verify assumptions on platform_device framework */ +#define CONFIG_CB710_DEBUG_ASSUMPTIONS + +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/mmc/host.h> + +struct cb710_slot; + +typedef int (*cb710_irq_handler_t)(struct cb710_slot *); + +/* per-virtual-slot structure */ +struct cb710_slot { + struct platform_device pdev; + void __iomem *iobase; + cb710_irq_handler_t irq_handler; +}; + +/* per-device structure */ +struct cb710_chip { + struct pci_dev *pdev; + void __iomem *iobase; + unsigned platform_id; +#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS + atomic_t slot_refs_count; +#endif + unsigned slot_mask; + unsigned slots; + spinlock_t irq_lock; + struct cb710_slot slot[0]; +}; + +/* NOTE: cb710_chip.slots is modified only during device init/exit and + * they are all serialized wrt themselves */ + +/* cb710_chip.slot_mask values */ +#define CB710_SLOT_MMC 1 +#define CB710_SLOT_MS 2 +#define CB710_SLOT_SM 4 + +/* slot port accessors - so the logic is more clear in the code */ +#define CB710_PORT_ACCESSORS(t) \ +static inline void cb710_write_port_##t(struct cb710_slot *slot, \ + unsigned port, u##t value) \ +{ \ + iowrite##t(value, slot->iobase + port); \ +} \ + \ +static inline u##t cb710_read_port_##t(struct cb710_slot *slot, \ + unsigned port) \ +{ \ + return ioread##t(slot->iobase + port); \ +} \ + \ +static inline void cb710_modify_port_##t(struct cb710_slot *slot, \ + unsigned port, u##t set, u##t clear) \ +{ \ + iowrite##t( \ + (ioread##t(slot->iobase + port) & ~clear)|set, \ + slot->iobase + port); \ +} + +CB710_PORT_ACCESSORS(8) +CB710_PORT_ACCESSORS(16) +CB710_PORT_ACCESSORS(32) + +void cb710_pci_update_config_reg(struct pci_dev *pdev, + int reg, uint32_t and, uint32_t xor); +void cb710_set_irq_handler(struct cb710_slot *slot, + cb710_irq_handler_t handler); + +/* some device struct walking */ + +static inline struct cb710_slot *cb710_pdev_to_slot( + struct platform_device *pdev) +{ + return container_of(pdev, struct cb710_slot, pdev); +} + +static inline struct cb710_chip *cb710_slot_to_chip(struct cb710_slot *slot) +{ + return dev_get_drvdata(slot->pdev.dev.parent); +} + +static inline struct device *cb710_slot_dev(struct cb710_slot *slot) +{ + return &slot->pdev.dev; +} + +static inline struct device *cb710_chip_dev(struct cb710_chip *chip) +{ + return &chip->pdev->dev; +} + +/* debugging aids */ + +#ifdef CONFIG_CB710_DEBUG +void cb710_dump_regs(struct cb710_chip *chip, unsigned dump); +#else +#define cb710_dump_regs(c, d) do {} while (0) +#endif + +#define CB710_DUMP_REGS_MMC 0x0F +#define CB710_DUMP_REGS_MS 0x30 +#define CB710_DUMP_REGS_SM 0xC0 +#define CB710_DUMP_REGS_ALL 0xFF +#define CB710_DUMP_REGS_MASK 0xFF + +#define CB710_DUMP_ACCESS_8 0x100 +#define CB710_DUMP_ACCESS_16 0x200 +#define CB710_DUMP_ACCESS_32 0x400 +#define CB710_DUMP_ACCESS_ALL 0x700 +#define CB710_DUMP_ACCESS_MASK 0x700 + +#endif /* LINUX_CB710_DRIVER_H */ +/* + * cb710/sgbuf2.h + * + * Copyright by Michał Mirosław, 2008-2009 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef LINUX_CB710_SG_H +#define LINUX_CB710_SG_H + +#include <linux/highmem.h> +#include <linux/scatterlist.h> + +/** + * cb710_sg_miter_stop_writing - stop mapping iteration after writing + * @miter: sg mapping iter to be stopped + * + * Description: + * Stops mapping iterator @miter. @miter should have been started + * started using sg_miter_start(). A stopped iteration can be + * resumed by calling sg_miter_next() on it. This is useful when + * resources (kmap) need to be released during iteration. + * + * This is a convenience wrapper that will be optimized out for arches + * that don't need flush_kernel_dcache_page(). + * + * Context: + * IRQ disabled if the SG_MITER_ATOMIC is set. Don't care otherwise. + */ +static inline void cb710_sg_miter_stop_writing(struct sg_mapping_iter *miter) +{ + if (miter->page) + flush_kernel_dcache_page(miter->page); + sg_miter_stop(miter); +} + +/* + * 32-bit PIO mapping sg iterator + * + * Hides scatterlist access issues - fragment boundaries, alignment, page + * mapping - for drivers using 32-bit-word-at-a-time-PIO (ie. PCI devices + * without DMA support). + * + * Best-case reading (transfer from device): + * sg_miter_start(); + * cb710_sg_dwiter_write_from_io(); + * cb710_sg_miter_stop_writing(); + * + * Best-case writing (transfer to device): + * sg_miter_start(); + * cb710_sg_dwiter_read_to_io(); + * sg_miter_stop(); + */ + +uint32_t cb710_sg_dwiter_read_next_block(struct sg_mapping_iter *miter); +void cb710_sg_dwiter_write_next_block(struct sg_mapping_iter *miter, uint32_t data); + +/** + * cb710_sg_dwiter_write_from_io - transfer data to mapped buffer from 32-bit IO port + * @miter: sg mapping iter + * @port: PIO port - IO or MMIO address + * @count: number of 32-bit words to transfer + * + * Description: + * Reads @count 32-bit words from register @port and stores it in + * buffer iterated by @miter. Data that would overflow the buffer + * is silently ignored. Iterator is advanced by 4*@count bytes + * or to the buffer's end whichever is closer. + * + * Context: + * IRQ disabled if the SG_MITER_ATOMIC is set. Don't care otherwise. + */ +static inline void cb710_sg_dwiter_write_from_io(struct sg_mapping_iter *miter, + void __iomem *port, size_t count) +{ + while (count-- > 0) + cb710_sg_dwiter_write_next_block(miter, ioread32(port)); +} + +/** + * cb710_sg_dwiter_read_to_io - transfer data to 32-bit IO port from mapped buffer + * @miter: sg mapping iter + * @port: PIO port - IO or MMIO address + * @count: number of 32-bit words to transfer + * + * Description: + * Writes @count 32-bit words to register @port from buffer iterated + * through @miter. If buffer ends before @count words are written + * missing data is replaced by zeroes. @miter is advanced by 4*@count + * bytes or to the buffer's end whichever is closer. + * + * Context: + * IRQ disabled if the SG_MITER_ATOMIC is set. Don't care otherwise. + */ +static inline void cb710_sg_dwiter_read_to_io(struct sg_mapping_iter *miter, + void __iomem *port, size_t count) +{ + while (count-- > 0) + iowrite32(cb710_sg_dwiter_read_next_block(miter), port); +} + +#endif /* LINUX_CB710_SG_H */ |