diff options
Diffstat (limited to 'include/linux/clk-provider.h')
| -rw-r--r-- | include/linux/clk-provider.h | 63 |
1 files changed, 60 insertions, 3 deletions
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 7f197d7addb..11860985fec 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -45,6 +45,14 @@ struct clk_hw; * undo any work done in the @prepare callback. Called with * prepare_lock held. * + * @is_prepared: Queries the hardware to determine if the clock is prepared. + * This function is allowed to sleep. Optional, if this op is not + * set then the prepare count will be used. + * + * @unprepare_unused: Unprepare the clock atomically. Only called from + * clk_disable_unused for prepare clocks with special needs. + * Called with prepare mutex held. This function may sleep. + * * @enable: Enable the clock atomically. This must not return until the * clock is generating a valid clock signal, usable by consumer * devices. Called with enable_lock held. This function must not @@ -108,6 +116,8 @@ struct clk_hw; struct clk_ops { int (*prepare)(struct clk_hw *hw); void (*unprepare)(struct clk_hw *hw); + int (*is_prepared)(struct clk_hw *hw); + void (*unprepare_unused)(struct clk_hw *hw); int (*enable)(struct clk_hw *hw); void (*disable)(struct clk_hw *hw); int (*is_enabled)(struct clk_hw *hw); @@ -239,9 +249,14 @@ struct clk_div_table { * CLK_DIVIDER_ONE_BASED - by default the divisor is the value read from the * register plus one. If CLK_DIVIDER_ONE_BASED is set then the divider is * the raw value read from the register, with the value of zero considered - * invalid + * invalid, unless CLK_DIVIDER_ALLOW_ZERO is set. * CLK_DIVIDER_POWER_OF_TWO - clock divisor is 2 raised to the value read from * the hardware register + * CLK_DIVIDER_ALLOW_ZERO - Allow zero divisors. For dividers which have + * CLK_DIVIDER_ONE_BASED set, it is possible to end up with a zero divisor. + * Some hardware implementations gracefully handle this case and allow a + * zero divisor by not modifying their input clock + * (divide by one / bypass). */ struct clk_divider { struct clk_hw hw; @@ -255,6 +270,7 @@ struct clk_divider { #define CLK_DIVIDER_ONE_BASED BIT(0) #define CLK_DIVIDER_POWER_OF_TWO BIT(1) +#define CLK_DIVIDER_ALLOW_ZERO BIT(2) extern const struct clk_ops clk_divider_ops; struct clk *clk_register_divider(struct device *dev, const char *name, @@ -274,7 +290,7 @@ struct clk *clk_register_divider_table(struct device *dev, const char *name, * @reg: register controlling multiplexer * @shift: shift to multiplexer bit field * @width: width of mutliplexer bit field - * @num_clks: number of parent clocks + * @flags: hardware-specific flags * @lock: register lock * * Clock with multiple selectable parents. Implements .get_parent, .set_parent @@ -287,8 +303,9 @@ struct clk *clk_register_divider_table(struct device *dev, const char *name, struct clk_mux { struct clk_hw hw; void __iomem *reg; + u32 *table; + u32 mask; u8 shift; - u8 width; u8 flags; spinlock_t *lock; }; @@ -297,11 +314,19 @@ struct clk_mux { #define CLK_MUX_INDEX_BIT BIT(1) extern const struct clk_ops clk_mux_ops; + struct clk *clk_register_mux(struct device *dev, const char *name, const char **parent_names, u8 num_parents, unsigned long flags, void __iomem *reg, u8 shift, u8 width, u8 clk_mux_flags, spinlock_t *lock); +struct clk *clk_register_mux_table(struct device *dev, const char *name, + const char **parent_names, u8 num_parents, unsigned long flags, + void __iomem *reg, u8 shift, u32 mask, + u8 clk_mux_flags, u32 *table, spinlock_t *lock); + +void of_fixed_factor_clk_setup(struct device_node *node); + /** * struct clk_fixed_factor - fixed multiplier and divider clock * @@ -325,6 +350,37 @@ struct clk *clk_register_fixed_factor(struct device *dev, const char *name, const char *parent_name, unsigned long flags, unsigned int mult, unsigned int div); +/*** + * struct clk_composite - aggregate clock of mux, divider and gate clocks + * + * @hw: handle between common and hardware-specific interfaces + * @mux_hw: handle between composite and hardware-specific mux clock + * @rate_hw: handle between composite and hardware-specific rate clock + * @gate_hw: handle between composite and hardware-specific gate clock + * @mux_ops: clock ops for mux + * @rate_ops: clock ops for rate + * @gate_ops: clock ops for gate + */ +struct clk_composite { + struct clk_hw hw; + struct clk_ops ops; + + struct clk_hw *mux_hw; + struct clk_hw *rate_hw; + struct clk_hw *gate_hw; + + const struct clk_ops *mux_ops; + const struct clk_ops *rate_ops; + const struct clk_ops *gate_ops; +}; + +struct clk *clk_register_composite(struct device *dev, const char *name, + const char **parent_names, int num_parents, + struct clk_hw *mux_hw, const struct clk_ops *mux_ops, + struct clk_hw *rate_hw, const struct clk_ops *rate_ops, + struct clk_hw *gate_hw, const struct clk_ops *gate_ops, + unsigned long flags); + /** * clk_register - allocate a new clock, register it and return an opaque cookie * @dev: device that is registering this clock @@ -351,6 +407,7 @@ unsigned int __clk_get_enable_count(struct clk *clk); unsigned int __clk_get_prepare_count(struct clk *clk); unsigned long __clk_get_rate(struct clk *clk); unsigned long __clk_get_flags(struct clk *clk); +bool __clk_is_prepared(struct clk *clk); bool __clk_is_enabled(struct clk *clk); struct clk *__clk_lookup(const char *name); |