diff options
Diffstat (limited to 'include/linux/i2c.h')
| -rw-r--r-- | include/linux/i2c.h | 125 |
1 files changed, 1 insertions, 124 deletions
diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 94aed0c85bb..800de224336 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -23,18 +23,16 @@ /* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and Frodo Looijaard <frodol@dds.nl> */ - #ifndef _LINUX_I2C_H #define _LINUX_I2C_H -#include <linux/types.h> -#ifdef __KERNEL__ #include <linux/mod_devicetable.h> #include <linux/device.h> /* for struct device */ #include <linux/sched.h> /* for completion */ #include <linux/mutex.h> #include <linux/of.h> /* for struct device_node */ #include <linux/swab.h> /* for swab16 */ +#include <uapi/linux/i2c.h> extern struct bus_type i2c_bus_type; extern struct device_type i2c_adapter_type; @@ -503,125 +501,4 @@ static inline int i2c_adapter_id(struct i2c_adapter *adap) i2c_del_driver) #endif /* I2C */ -#endif /* __KERNEL__ */ - -/** - * struct i2c_msg - an I2C transaction segment beginning with START - * @addr: Slave address, either seven or ten bits. When this is a ten - * bit address, I2C_M_TEN must be set in @flags and the adapter - * must support I2C_FUNC_10BIT_ADDR. - * @flags: I2C_M_RD is handled by all adapters. No other flags may be - * provided unless the adapter exported the relevant I2C_FUNC_* - * flags through i2c_check_functionality(). - * @len: Number of data bytes in @buf being read from or written to the - * I2C slave address. For read transactions where I2C_M_RECV_LEN - * is set, the caller guarantees that this buffer can hold up to - * 32 bytes in addition to the initial length byte sent by the - * slave (plus, if used, the SMBus PEC); and this value will be - * incremented by the number of block data bytes received. - * @buf: The buffer into which data is read, or from which it's written. - * - * An i2c_msg is the low level representation of one segment of an I2C - * transaction. It is visible to drivers in the @i2c_transfer() procedure, - * to userspace from i2c-dev, and to I2C adapter drivers through the - * @i2c_adapter.@master_xfer() method. - * - * Except when I2C "protocol mangling" is used, all I2C adapters implement - * the standard rules for I2C transactions. Each transaction begins with a - * START. That is followed by the slave address, and a bit encoding read - * versus write. Then follow all the data bytes, possibly including a byte - * with SMBus PEC. The transfer terminates with a NAK, or when all those - * bytes have been transferred and ACKed. If this is the last message in a - * group, it is followed by a STOP. Otherwise it is followed by the next - * @i2c_msg transaction segment, beginning with a (repeated) START. - * - * Alternatively, when the adapter supports I2C_FUNC_PROTOCOL_MANGLING then - * passing certain @flags may have changed those standard protocol behaviors. - * Those flags are only for use with broken/nonconforming slaves, and with - * adapters which are known to support the specific mangling options they - * need (one or more of IGNORE_NAK, NO_RD_ACK, NOSTART, and REV_DIR_ADDR). - */ -struct i2c_msg { - __u16 addr; /* slave address */ - __u16 flags; -#define I2C_M_TEN 0x0010 /* this is a ten bit chip address */ -#define I2C_M_RD 0x0001 /* read data, from slave to master */ -#define I2C_M_STOP 0x8000 /* if I2C_FUNC_PROTOCOL_MANGLING */ -#define I2C_M_NOSTART 0x4000 /* if I2C_FUNC_NOSTART */ -#define I2C_M_REV_DIR_ADDR 0x2000 /* if I2C_FUNC_PROTOCOL_MANGLING */ -#define I2C_M_IGNORE_NAK 0x1000 /* if I2C_FUNC_PROTOCOL_MANGLING */ -#define I2C_M_NO_RD_ACK 0x0800 /* if I2C_FUNC_PROTOCOL_MANGLING */ -#define I2C_M_RECV_LEN 0x0400 /* length will be first received byte */ - __u16 len; /* msg length */ - __u8 *buf; /* pointer to msg data */ -}; - -/* To determine what functionality is present */ - -#define I2C_FUNC_I2C 0x00000001 -#define I2C_FUNC_10BIT_ADDR 0x00000002 -#define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_IGNORE_NAK etc. */ -#define I2C_FUNC_SMBUS_PEC 0x00000008 -#define I2C_FUNC_NOSTART 0x00000010 /* I2C_M_NOSTART */ -#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000 /* SMBus 2.0 */ -#define I2C_FUNC_SMBUS_QUICK 0x00010000 -#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000 -#define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000 -#define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000 -#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000 -#define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000 -#define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000 -#define I2C_FUNC_SMBUS_PROC_CALL 0x00800000 -#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000 -#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000 -#define I2C_FUNC_SMBUS_READ_I2C_BLOCK 0x04000000 /* I2C-like block xfer */ -#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* w/ 1-byte reg. addr. */ - -#define I2C_FUNC_SMBUS_BYTE (I2C_FUNC_SMBUS_READ_BYTE | \ - I2C_FUNC_SMBUS_WRITE_BYTE) -#define I2C_FUNC_SMBUS_BYTE_DATA (I2C_FUNC_SMBUS_READ_BYTE_DATA | \ - I2C_FUNC_SMBUS_WRITE_BYTE_DATA) -#define I2C_FUNC_SMBUS_WORD_DATA (I2C_FUNC_SMBUS_READ_WORD_DATA | \ - I2C_FUNC_SMBUS_WRITE_WORD_DATA) -#define I2C_FUNC_SMBUS_BLOCK_DATA (I2C_FUNC_SMBUS_READ_BLOCK_DATA | \ - I2C_FUNC_SMBUS_WRITE_BLOCK_DATA) -#define I2C_FUNC_SMBUS_I2C_BLOCK (I2C_FUNC_SMBUS_READ_I2C_BLOCK | \ - I2C_FUNC_SMBUS_WRITE_I2C_BLOCK) - -#define I2C_FUNC_SMBUS_EMUL (I2C_FUNC_SMBUS_QUICK | \ - I2C_FUNC_SMBUS_BYTE | \ - I2C_FUNC_SMBUS_BYTE_DATA | \ - I2C_FUNC_SMBUS_WORD_DATA | \ - I2C_FUNC_SMBUS_PROC_CALL | \ - I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \ - I2C_FUNC_SMBUS_I2C_BLOCK | \ - I2C_FUNC_SMBUS_PEC) - -/* - * Data for SMBus Messages - */ -#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */ -union i2c_smbus_data { - __u8 byte; - __u16 word; - __u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */ - /* and one more for user-space compatibility */ -}; - -/* i2c_smbus_xfer read or write markers */ -#define I2C_SMBUS_READ 1 -#define I2C_SMBUS_WRITE 0 - -/* SMBus transaction types (size parameter in the above functions) - Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */ -#define I2C_SMBUS_QUICK 0 -#define I2C_SMBUS_BYTE 1 -#define I2C_SMBUS_BYTE_DATA 2 -#define I2C_SMBUS_WORD_DATA 3 -#define I2C_SMBUS_PROC_CALL 4 -#define I2C_SMBUS_BLOCK_DATA 5 -#define I2C_SMBUS_I2C_BLOCK_BROKEN 6 -#define I2C_SMBUS_BLOCK_PROC_CALL 7 /* SMBus 2.0 */ -#define I2C_SMBUS_I2C_BLOCK_DATA 8 - #endif /* _LINUX_I2C_H */ |