diff options
Diffstat (limited to 'include/linux/i2c.h')
| -rw-r--r-- | include/linux/i2c.h | 74 |
1 files changed, 24 insertions, 50 deletions
diff --git a/include/linux/i2c.h b/include/linux/i2c.h index c86c3b07604..f4784c0fe97 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -47,6 +47,7 @@ struct i2c_driver; union i2c_smbus_data; struct i2c_board_info; +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) /* * The master routines are the ones normally used to transmit data to devices * on a bus (or read from them). Apart from two basic transfer functions to @@ -93,6 +94,7 @@ extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client *client, extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client, u8 command, u8 length, const u8 *values); +#endif /* I2C */ /** * struct i2c_driver - represent an I2C device driver @@ -100,9 +102,8 @@ extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client, * @class: What kind of i2c device we instantiate (for detect) * @attach_adapter: Callback for bus addition (for legacy drivers) * @detach_adapter: Callback for bus removal (for legacy drivers) - * @detach_client: Callback for device removal (for legacy drivers) - * @probe: Callback for device binding (new-style drivers) - * @remove: Callback for device unbinding (new-style drivers) + * @probe: Callback for device binding + * @remove: Callback for device unbinding * @shutdown: Callback for device shutdown * @suspend: Callback for device suspend * @resume: Callback for device resume @@ -137,26 +138,14 @@ struct i2c_driver { int id; unsigned int class; - /* Notifies the driver that a new bus has appeared. This routine - * can be used by the driver to test if the bus meets its conditions - * & seek for the presence of the chip(s) it supports. If found, it - * registers the client(s) that are on the bus to the i2c admin. via - * i2c_attach_client. (LEGACY I2C DRIVERS ONLY) + /* Notifies the driver that a new bus has appeared or is about to be + * removed. You should avoid using this if you can, it will probably + * be removed in a near future. */ int (*attach_adapter)(struct i2c_adapter *); int (*detach_adapter)(struct i2c_adapter *); - /* tells the driver that a client is about to be deleted & gives it - * the chance to remove its private data. Also, if the client struct - * has been dynamically allocated by the driver in the function above, - * it must be freed here. (LEGACY I2C DRIVERS ONLY) - */ - int (*detach_client)(struct i2c_client *) __deprecated; - - /* Standard driver model interfaces, for "new style" i2c drivers. - * With the driver model, device enumeration is NEVER done by drivers; - * it's done by infrastructure. (NEW STYLE DRIVERS ONLY) - */ + /* Standard driver model interfaces */ int (*probe)(struct i2c_client *, const struct i2c_device_id *); int (*remove)(struct i2c_client *); @@ -191,9 +180,8 @@ struct i2c_driver { * @driver: device's driver, hence pointer to access routines * @dev: Driver model device node for the slave. * @irq: indicates the IRQ generated by this device (if any) - * @list: list of active/busy clients (DEPRECATED) - * @detected: member of an i2c_driver.clients list - * @released: used to synchronize client releases & detaches and references + * @detected: member of an i2c_driver.clients list or i2c-core's + * userspace_devices list * * An i2c_client identifies a single device (i.e. chip) connected to an * i2c bus. The behaviour exposed to Linux is defined by the driver @@ -209,9 +197,7 @@ struct i2c_client { struct i2c_driver *driver; /* and our access routines */ struct device dev; /* the device structure */ int irq; /* irq issued by device */ - struct list_head list; /* DEPRECATED */ struct list_head detected; - struct completion released; }; #define to_i2c_client(d) container_of(d, struct i2c_client, dev) @@ -248,11 +234,10 @@ static inline void i2c_set_clientdata(struct i2c_client *dev, void *data) * that, such as chip type, configuration, associated IRQ, and so on. * * i2c_board_info is used to build tables of information listing I2C devices - * that are present. This information is used to grow the driver model tree - * for "new style" I2C drivers. For mainboards this is done statically using - * i2c_register_board_info(); bus numbers identify adapters that aren't - * yet available. For add-on boards, i2c_new_device() does this dynamically - * with the adapter already known. + * that are present. This information is used to grow the driver model tree. + * For mainboards this is done statically using i2c_register_board_info(); + * bus numbers identify adapters that aren't yet available. For add-on boards, + * i2c_new_device() does this dynamically with the adapter already known. */ struct i2c_board_info { char type[I2C_NAME_SIZE]; @@ -274,9 +259,10 @@ struct i2c_board_info { * are provided using conventional syntax. */ #define I2C_BOARD_INFO(dev_type, dev_addr) \ - .type = (dev_type), .addr = (dev_addr) + .type = dev_type, .addr = (dev_addr) +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) /* Add-on boards should register/unregister their devices; e.g. a board * with integrated I2C, a config eeprom, sensors, and a codec that's * used in conjunction with the primary hardware. @@ -300,6 +286,7 @@ extern struct i2c_client * i2c_new_dummy(struct i2c_adapter *adap, u16 address); extern void i2c_unregister_device(struct i2c_client *); +#endif /* I2C */ /* Mainboard arch_initcall() code should register all its I2C devices. * This is done at arch_initcall time, before declaring any i2c adapters. @@ -316,7 +303,7 @@ i2c_register_board_info(int busnum, struct i2c_board_info const *info, { return 0; } -#endif +#endif /* I2C_BOARDINFO */ /* * The following structs are for those who like to implement new bus drivers: @@ -352,21 +339,15 @@ struct i2c_adapter { const struct i2c_algorithm *algo; /* the algorithm to access the bus */ void *algo_data; - /* --- administration stuff. */ - int (*client_register)(struct i2c_client *); - int (*client_unregister)(struct i2c_client *); - /* data fields that are valid for all devices */ u8 level; /* nesting level for lockdep */ struct mutex bus_lock; - struct mutex clist_lock; int timeout; /* in jiffies */ int retries; struct device dev; /* the adapter device */ int nr; - struct list_head clients; /* DEPRECATED */ char name[48]; struct completion dev_released; }; @@ -412,11 +393,16 @@ struct i2c_client_address_data { /* The numbers to use to set I2C bus address */ #define ANY_I2C_BUS 0xffff +/* Construct an I2C_CLIENT_END-terminated array of i2c addresses */ +#define I2C_ADDRS(addr, addrs...) \ + ((const unsigned short []){ addr, ## addrs, I2C_CLIENT_END }) + /* ----- functions exported by i2c.o */ /* administration... */ +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) extern int i2c_add_adapter(struct i2c_adapter *); extern int i2c_del_adapter(struct i2c_adapter *); extern int i2c_add_numbered_adapter(struct i2c_adapter *); @@ -429,11 +415,6 @@ static inline int i2c_add_driver(struct i2c_driver *driver) return i2c_register_driver(THIS_MODULE, driver); } -/* These are deprecated, your driver should use the standard .probe() - * and .remove() methods instead. */ -extern int __deprecated i2c_attach_client(struct i2c_client *); -extern int __deprecated i2c_detach_client(struct i2c_client *); - extern struct i2c_client *i2c_use_client(struct i2c_client *client); extern void i2c_release_client(struct i2c_client *client); @@ -442,14 +423,6 @@ extern void i2c_release_client(struct i2c_client *client); extern void i2c_clients_command(struct i2c_adapter *adap, unsigned int cmd, void *arg); -/* Detect function. It iterates over all possible addresses itself. - * It will only call found_proc if some client is connected at the - * specific address (unless a 'force' matched); - */ -extern int i2c_probe(struct i2c_adapter *adapter, - const struct i2c_client_address_data *address_data, - int (*found_proc) (struct i2c_adapter *, int, int)); - extern struct i2c_adapter *i2c_get_adapter(int id); extern void i2c_put_adapter(struct i2c_adapter *adap); @@ -471,6 +444,7 @@ static inline int i2c_adapter_id(struct i2c_adapter *adap) { return adap->nr; } +#endif /* I2C */ #endif /* __KERNEL__ */ /** |