diff options
Diffstat (limited to 'include/linux/i2c')
| -rw-r--r-- | include/linux/i2c/adp8870.h | 153 | ||||
| -rw-r--r-- | include/linux/i2c/i2c-sh_mobile.h | 10 | ||||
| -rw-r--r-- | include/linux/i2c/mpr121_touchkey.h | 20 | ||||
| -rw-r--r-- | include/linux/i2c/tsc2007.h | 7 | ||||
| -rw-r--r-- | include/linux/i2c/twl.h | 79 |
5 files changed, 261 insertions, 8 deletions
diff --git a/include/linux/i2c/adp8870.h b/include/linux/i2c/adp8870.h new file mode 100644 index 00000000000..624dceccbd5 --- /dev/null +++ b/include/linux/i2c/adp8870.h @@ -0,0 +1,153 @@ +/* + * Definitions and platform data for Analog Devices + * Backlight drivers ADP8870 + * + * Copyright 2009-2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __LINUX_I2C_ADP8870_H +#define __LINUX_I2C_ADP8870_H + +#define ID_ADP8870 8870 + +#define ADP8870_MAX_BRIGHTNESS 0x7F +#define FLAG_OFFT_SHIFT 8 + +/* + * LEDs subdevice platform data + */ + +#define ADP8870_LED_DIS_BLINK (0 << FLAG_OFFT_SHIFT) +#define ADP8870_LED_OFFT_600ms (1 << FLAG_OFFT_SHIFT) +#define ADP8870_LED_OFFT_1200ms (2 << FLAG_OFFT_SHIFT) +#define ADP8870_LED_OFFT_1800ms (3 << FLAG_OFFT_SHIFT) + +#define ADP8870_LED_ONT_200ms 0 +#define ADP8870_LED_ONT_600ms 1 +#define ADP8870_LED_ONT_800ms 2 +#define ADP8870_LED_ONT_1200ms 3 + +#define ADP8870_LED_D7 (7) +#define ADP8870_LED_D6 (6) +#define ADP8870_LED_D5 (5) +#define ADP8870_LED_D4 (4) +#define ADP8870_LED_D3 (3) +#define ADP8870_LED_D2 (2) +#define ADP8870_LED_D1 (1) + +/* + * Backlight subdevice platform data + */ + +#define ADP8870_BL_D7 (1 << 6) +#define ADP8870_BL_D6 (1 << 5) +#define ADP8870_BL_D5 (1 << 4) +#define ADP8870_BL_D4 (1 << 3) +#define ADP8870_BL_D3 (1 << 2) +#define ADP8870_BL_D2 (1 << 1) +#define ADP8870_BL_D1 (1 << 0) + +#define ADP8870_FADE_T_DIS 0 /* Fade Timer Disabled */ +#define ADP8870_FADE_T_300ms 1 /* 0.3 Sec */ +#define ADP8870_FADE_T_600ms 2 +#define ADP8870_FADE_T_900ms 3 +#define ADP8870_FADE_T_1200ms 4 +#define ADP8870_FADE_T_1500ms 5 +#define ADP8870_FADE_T_1800ms 6 +#define ADP8870_FADE_T_2100ms 7 +#define ADP8870_FADE_T_2400ms 8 +#define ADP8870_FADE_T_2700ms 9 +#define ADP8870_FADE_T_3000ms 10 +#define ADP8870_FADE_T_3500ms 11 +#define ADP8870_FADE_T_4000ms 12 +#define ADP8870_FADE_T_4500ms 13 +#define ADP8870_FADE_T_5000ms 14 +#define ADP8870_FADE_T_5500ms 15 /* 5.5 Sec */ + +#define ADP8870_FADE_LAW_LINEAR 0 +#define ADP8870_FADE_LAW_SQUARE 1 +#define ADP8870_FADE_LAW_CUBIC1 2 +#define ADP8870_FADE_LAW_CUBIC2 3 + +#define ADP8870_BL_AMBL_FILT_80ms 0 /* Light sensor filter time */ +#define ADP8870_BL_AMBL_FILT_160ms 1 +#define ADP8870_BL_AMBL_FILT_320ms 2 +#define ADP8870_BL_AMBL_FILT_640ms 3 +#define ADP8870_BL_AMBL_FILT_1280ms 4 +#define ADP8870_BL_AMBL_FILT_2560ms 5 +#define ADP8870_BL_AMBL_FILT_5120ms 6 +#define ADP8870_BL_AMBL_FILT_10240ms 7 /* 10.24 sec */ + +/* + * Blacklight current 0..30mA + */ +#define ADP8870_BL_CUR_mA(I) ((I * 127) / 30) + +/* + * L2 comparator current 0..1106uA + */ +#define ADP8870_L2_COMP_CURR_uA(I) ((I * 255) / 1106) + +/* + * L3 comparator current 0..551uA + */ +#define ADP8870_L3_COMP_CURR_uA(I) ((I * 255) / 551) + +/* + * L4 comparator current 0..275uA + */ +#define ADP8870_L4_COMP_CURR_uA(I) ((I * 255) / 275) + +/* + * L5 comparator current 0..138uA + */ +#define ADP8870_L5_COMP_CURR_uA(I) ((I * 255) / 138) + +struct adp8870_backlight_platform_data { + u8 bl_led_assign; /* 1 = Backlight 0 = Individual LED */ + u8 pwm_assign; /* 1 = Enables PWM mode */ + + u8 bl_fade_in; /* Backlight Fade-In Timer */ + u8 bl_fade_out; /* Backlight Fade-Out Timer */ + u8 bl_fade_law; /* fade-on/fade-off transfer characteristic */ + + u8 en_ambl_sens; /* 1 = enable ambient light sensor */ + u8 abml_filt; /* Light sensor filter time */ + + u8 l1_daylight_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l1_daylight_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l2_bright_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l2_bright_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l3_office_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l3_office_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l4_indoor_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l4_indor_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l5_dark_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l5_dark_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + + u8 l2_trip; /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */ + u8 l2_hyst; /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */ + u8 l3_trip; /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */ + u8 l3_hyst; /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */ + u8 l4_trip; /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */ + u8 l4_hyst; /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */ + u8 l5_trip; /* use L5_COMP_CURR_uA(I) 0 <= I <= 138 uA */ + u8 l5_hyst; /* use L6_COMP_CURR_uA(I) 0 <= I <= 138 uA */ + + /** + * Independent Current Sinks / LEDS + * Sinks not assigned to the Backlight can be exposed to + * user space using the LEDS CLASS interface + */ + + int num_leds; + struct led_info *leds; + u8 led_fade_in; /* LED Fade-In Timer */ + u8 led_fade_out; /* LED Fade-Out Timer */ + u8 led_fade_law; /* fade-on/fade-off transfer characteristic */ + u8 led_on_time; +}; + +#endif /* __LINUX_I2C_ADP8870_H */ diff --git a/include/linux/i2c/i2c-sh_mobile.h b/include/linux/i2c/i2c-sh_mobile.h new file mode 100644 index 00000000000..beda7081aea --- /dev/null +++ b/include/linux/i2c/i2c-sh_mobile.h @@ -0,0 +1,10 @@ +#ifndef __I2C_SH_MOBILE_H__ +#define __I2C_SH_MOBILE_H__ + +#include <linux/platform_device.h> + +struct i2c_sh_mobile_platform_data { + unsigned long bus_speed; +}; + +#endif /* __I2C_SH_MOBILE_H__ */ diff --git a/include/linux/i2c/mpr121_touchkey.h b/include/linux/i2c/mpr121_touchkey.h new file mode 100644 index 00000000000..f0bcc38bbb9 --- /dev/null +++ b/include/linux/i2c/mpr121_touchkey.h @@ -0,0 +1,20 @@ +/* Header file for Freescale MPR121 Capacitive Touch Sensor */ + +#ifndef _MPR121_TOUCHKEY_H +#define _MPR121_TOUCHKEY_H + +/** + * struct mpr121_platform_data - platform data for mpr121 sensor + * @keymap: pointer to array of KEY_* values representing keymap + * @keymap_size: size of the keymap + * @wakeup: configure the button as a wake-up source + * @vdd_uv: VDD voltage in uV + */ +struct mpr121_platform_data { + const unsigned short *keymap; + unsigned int keymap_size; + bool wakeup; + int vdd_uv; +}; + +#endif /* _MPR121_TOUCHKEY_H */ diff --git a/include/linux/i2c/tsc2007.h b/include/linux/i2c/tsc2007.h index c6361fbb7bf..591427a63b0 100644 --- a/include/linux/i2c/tsc2007.h +++ b/include/linux/i2c/tsc2007.h @@ -6,6 +6,13 @@ struct tsc2007_platform_data { u16 model; /* 2007. */ u16 x_plate_ohms; + u16 max_rt; /* max. resistance above which samples are ignored */ + unsigned long poll_delay; /* delay (in ms) after pen-down event + before polling starts */ + unsigned long poll_period; /* time (in ms) between samples */ + int fuzzx; /* fuzz factor for X, Y and pressure axes */ + int fuzzy; + int fuzzz; int (*get_pendown_state)(void); void (*clear_penirq)(void); /* If needed, clear 2nd level diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index 0c0d1ae7998..114c0f6fc63 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -91,6 +91,7 @@ #define BCI_INTR_OFFSET 2 #define MADC_INTR_OFFSET 3 #define USB_INTR_OFFSET 4 +#define CHARGERFAULT_INTR_OFFSET 5 #define BCI_PRES_INTR_OFFSET 9 #define USB_PRES_INTR_OFFSET 10 #define RTC_INTR_OFFSET 11 @@ -150,7 +151,12 @@ #define MMC_PU (0x1 << 3) #define MMC_PD (0x1 << 2) - +#define TWL_SIL_TYPE(rev) ((rev) & 0x00FFFFFF) +#define TWL_SIL_REV(rev) ((rev) >> 24) +#define TWL_SIL_5030 0x09002F +#define TWL5030_REV_1_0 0x00 +#define TWL5030_REV_1_1 0x10 +#define TWL5030_REV_1_2 0x30 #define TWL4030_CLASS_ID 0x4030 #define TWL6030_CLASS_ID 0x6030 @@ -165,6 +171,8 @@ static inline int twl_class_is_ ##class(void) \ TWL_CLASS_IS(4030, TWL4030_CLASS_ID) TWL_CLASS_IS(6030, TWL6030_CLASS_ID) +#define TWL6025_SUBCLASS BIT(4) /* TWL6025 has changed registers */ + /* * Read and write single 8-bit registers */ @@ -180,6 +188,9 @@ int twl_i2c_read_u8(u8 mod_no, u8 *val, u8 reg); int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); +int twl_get_type(void); +int twl_get_version(void); + int twl6030_interrupt_unmask(u8 bit_mask, u8 offset); int twl6030_interrupt_mask(u8 bit_mask, u8 offset); @@ -279,7 +290,12 @@ static inline int twl6030_mmc_card_detect(struct device *dev, int slot) *(Use TWL_4030_MODULE_INTBR) */ +#define REG_IDCODE_7_0 0x00 +#define REG_IDCODE_15_8 0x01 +#define REG_IDCODE_16_23 0x02 +#define REG_IDCODE_31_24 0x03 #define REG_GPPUPDCTR1 0x0F +#define REG_UNLOCK_TEST_REG 0x12 /*I2C1 and I2C4(SR) SDA/SCL pull-up control bits */ @@ -288,6 +304,8 @@ static inline int twl6030_mmc_card_detect(struct device *dev, int slot) #define SR_I2C_SCL_CTRL_PU BIT(4) #define SR_I2C_SDA_CTRL_PU BIT(6) +#define TWL_EEPROM_R_UNLOCK 0x49 + /*----------------------------------------------------------------------*/ /* @@ -501,7 +519,7 @@ static inline int twl6030_mmc_card_detect(struct device *dev, int slot) #define RES_32KCLKOUT 26 #define RES_RESET 27 /* Power Reference */ -#define RES_Main_Ref 28 +#define RES_MAIN_REF 28 #define TOTAL_RESOURCES 28 /* @@ -593,6 +611,7 @@ enum twl4030_usb_mode { struct twl4030_usb_data { enum twl4030_usb_mode usb_mode; + unsigned long features; int (*phy_init)(struct device *dev); int (*phy_exit)(struct device *dev); @@ -638,28 +657,41 @@ struct twl4030_power_data { extern void twl4030_power_init(struct twl4030_power_data *triton2_scripts); extern int twl4030_remove_script(u8 flags); -struct twl4030_codec_audio_data { +struct twl4030_codec_data { unsigned int digimic_delay; /* in ms */ unsigned int ramp_delay_value; unsigned int offset_cncl_path; unsigned int check_defaults:1; unsigned int reset_registers:1; unsigned int hs_extmute:1; + u16 hs_left_step; + u16 hs_right_step; + u16 hf_left_step; + u16 hf_right_step; void (*set_hs_extmute)(int mute); }; -struct twl4030_codec_vibra_data { +struct twl4030_vibra_data { unsigned int coexist; + + /* twl6040 */ + unsigned int vibldrv_res; /* left driver resistance */ + unsigned int vibrdrv_res; /* right driver resistance */ + unsigned int viblmotor_res; /* left motor resistance */ + unsigned int vibrmotor_res; /* right motor resistance */ + int vddvibl_uV; /* VDDVIBL volt, set 0 for fixed reg */ + int vddvibr_uV; /* VDDVIBR volt, set 0 for fixed reg */ }; -struct twl4030_codec_data { +struct twl4030_audio_data { unsigned int audio_mclk; - struct twl4030_codec_audio_data *audio; - struct twl4030_codec_vibra_data *vibra; + struct twl4030_codec_data *codec; + struct twl4030_vibra_data *vibra; /* twl6040 */ int audpwron_gpio; /* audio power-on gpio */ int naudint_irq; /* audio interrupt */ + unsigned int irq_base; }; struct twl4030_platform_data { @@ -671,7 +703,7 @@ struct twl4030_platform_data { struct twl4030_keypad_data *keypad; struct twl4030_usb_data *usb; struct twl4030_power_data *power; - struct twl4030_codec_data *codec; + struct twl4030_audio_data *audio; /* Common LDO regulators for TWL4030/TWL6030 */ struct regulator_init_data *vdac; @@ -699,6 +731,20 @@ struct twl4030_platform_data { struct regulator_init_data *vcxio; struct regulator_init_data *vusb; struct regulator_init_data *clk32kg; + /* TWL6025 LDO regulators */ + struct regulator_init_data *ldo1; + struct regulator_init_data *ldo2; + struct regulator_init_data *ldo3; + struct regulator_init_data *ldo4; + struct regulator_init_data *ldo5; + struct regulator_init_data *ldo6; + struct regulator_init_data *ldo7; + struct regulator_init_data *ldoln; + struct regulator_init_data *ldousb; + /* TWL6025 DCDC regulators */ + struct regulator_init_data *smps3; + struct regulator_init_data *smps4; + struct regulator_init_data *vio6025; }; /*----------------------------------------------------------------------*/ @@ -780,4 +826,21 @@ static inline int twl4030charger_usb_en(int enable) { return 0; } #define TWL6030_REG_VRTC 47 #define TWL6030_REG_CLK32KG 48 +/* LDOs on 6025 have different names */ +#define TWL6025_REG_LDO2 49 +#define TWL6025_REG_LDO4 50 +#define TWL6025_REG_LDO3 51 +#define TWL6025_REG_LDO5 52 +#define TWL6025_REG_LDO1 53 +#define TWL6025_REG_LDO7 54 +#define TWL6025_REG_LDO6 55 +#define TWL6025_REG_LDOLN 56 +#define TWL6025_REG_LDOUSB 57 + +/* 6025 DCDC supplies */ +#define TWL6025_REG_SMPS3 58 +#define TWL6025_REG_SMPS4 59 +#define TWL6025_REG_VIO 60 + + #endif /* End of __TWL4030_H */ |