diff options
Diffstat (limited to 'include/linux/ibmtr.h')
-rw-r--r-- | include/linux/ibmtr.h | 373 |
1 files changed, 0 insertions, 373 deletions
diff --git a/include/linux/ibmtr.h b/include/linux/ibmtr.h deleted file mode 100644 index 06695b74d40..00000000000 --- a/include/linux/ibmtr.h +++ /dev/null @@ -1,373 +0,0 @@ -#ifndef __LINUX_IBMTR_H__ -#define __LINUX_IBMTR_H__ - -/* Definitions for an IBM Token Ring card. */ -/* This file is distributed under the GNU GPL */ - -/* ported to the Alpha architecture 02/20/96 (just used the HZ macro) */ - -#define TR_RETRY_INTERVAL (30*HZ) /* 500 on PC = 5 s */ -#define TR_RST_TIME (msecs_to_jiffies(50)) /* 5 on PC = 50 ms */ -#define TR_BUSY_INTERVAL (msecs_to_jiffies(200)) /* 5 on PC = 200 ms */ -#define TR_SPIN_INTERVAL (3*HZ) /* 3 seconds before init timeout */ - -#define TR_ISA 1 -#define TR_MCA 2 -#define TR_ISAPNP 3 -#define NOTOK 0 - -#define IBMTR_SHARED_RAM_SIZE 0x10000 -#define IBMTR_IO_EXTENT 4 -#define IBMTR_MAX_ADAPTERS 4 - -#define CHANNEL_ID 0X1F30 -#define AIP 0X1F00 -#define AIPADAPTYPE 0X1FA0 -#define AIPDATARATE 0X1FA2 -#define AIPEARLYTOKEN 0X1FA4 -#define AIPAVAILSHRAM 0X1FA6 -#define AIPSHRAMPAGE 0X1FA8 -#define AIP4MBDHB 0X1FAA -#define AIP16MBDHB 0X1FAC -#define AIPFID 0X1FBA - -#define ADAPTRESET 0x1 /* Control Adapter reset (add to base) */ -#define ADAPTRESETREL 0x2 /* Release Adapter from reset ( """) */ -#define ADAPTINTREL 0x3 /* Adapter interrupt release */ - -#define GLOBAL_INT_ENABLE 0x02f0 - -/* MMIO bits 0-4 select register */ -#define RRR_EVEN 0x00 /* Shared RAM relocation registers - even and odd */ -/* Used to set the starting address of shared RAM */ -/* Bits 1 through 7 of this register map to bits 13 through 19 of the shared - RAM address.*/ -/* ie: 0x02 sets RAM address to ...ato! issy su wazzoo !! GODZILLA!!! */ -#define RRR_ODD 0x01 -/* Bits 2 and 3 of this register can be read to determine shared RAM size */ -/* 00 for 8k, 01 for 16k, 10 for 32k, 11 for 64k */ -#define WRBR_EVEN 0x02 /* Write region base registers - even and odd */ -#define WRBR_ODD 0x03 -#define WWOR_EVEN 0x04 /* Write window open registers - even and odd */ -#define WWOR_ODD 0x05 -#define WWCR_EVEN 0x06 /* Write window close registers - even and odd */ -#define WWCR_ODD 0x07 - -/* Interrupt status registers - PC system - even and odd */ -#define ISRP_EVEN 0x08 - -#define TCR_INT 0x10 /* Bit 4 - Timer interrupt. The TVR_EVEN timer has - expired. */ -#define ERR_INT 0x08 /* Bit 3 - Error interrupt. The adapter has had an - internal error. */ -#define ACCESS_INT 0x04 /* Bit 2 - Access interrupt. You have attempted to - write to an invalid area of shared RAM - or an invalid register within the MMIO. */ -/* In addition, the following bits within ISRP_EVEN can be turned on or off */ -/* by you to control the interrupt processing: */ -#define INT_ENABLE 0x40 /* Bit 6 - Interrupt enable. If 0, no interrupts will - occur. If 1, interrupts will occur normally. - Normally set to 1. */ -/* Bit 0 - Primary or alternate adapter. Set to zero if this adapter is the - primary adapter, 1 if this adapter is the alternate adapter. */ - - -#define ISRP_ODD 0x09 - -#define ADAP_CHK_INT 0x40 /* Bit 6 - Adapter check. the adapter has - encountered a serious problem and has closed - itself. Whoa. */ -#define SRB_RESP_INT 0x20 /* Bit 5 - SRB response. The adapter has accepted - an SRB request and set the return code within - the SRB. */ -#define ASB_FREE_INT 0x10 /* Bit 4 - ASB free. The adapter has read the ASB - and this area can be safely reused. This interrupt - is only used if your application has set the ASB - free request bit in ISRA_ODD or if an error was - detected in your response. */ -#define ARB_CMD_INT 0x08 /* Bit 3 - ARB command. The adapter has given you a - command for action. The command is located in the - ARB area of shared memory. */ -#define SSB_RESP_INT 0x04 /* Bit 2 - SSB response. The adapter has posted a - response to your SRB (the response is located in - the SSB area of shared memory). */ -/* Bit 1 - Bridge frame forward complete. */ - - - -#define ISRA_EVEN 0x0A /*Interrupt status registers - adapter - even and odd */ -/* Bit 7 - Internal parity error (on adapter's internal bus) */ -/* Bit 6 - Timer interrupt pending */ -/* Bit 5 - Access interrupt (attempt by adapter to access illegal address) */ -/* Bit 4 - Adapter microcode problem (microcode dead-man timer expired) */ -/* Bit 3 - Adapter processor check status */ -/* Bit 2 - Reserved */ -/* Bit 1 - Adapter hardware interrupt mask (prevents internal interrupts) */ -/* Bit 0 - Adapter software interrupt mask (prevents internal software ints) */ - -#define ISRA_ODD 0x0B -#define CMD_IN_SRB 0x20 /* Bit 5 - Indicates that you have placed a new - command in the SRB and are ready for the adapter to - process the command. */ -#define RESP_IN_ASB 0x10 /* Bit 4 - Indicates that you have placed a response - (an ASB) in the shared RAM which is available for - the adapter's use. */ -/* Bit 3 - Indicates that you are ready to put an SRB in the shared RAM, but - that a previous command is still pending. The adapter will then - interrupt you when the previous command is completed */ -/* Bit 2 - Indicates that you are ready to put an ASB in the shared RAM, but - that a previous ASB is still pending. The adapter will then interrupt - you when the previous ASB is copied. */ -#define ARB_FREE 0x2 -#define SSB_FREE 0x1 - -#define TCR_EVEN 0x0C /* Timer control registers - even and odd */ -#define TCR_ODD 0x0D -#define TVR_EVEN 0x0E /* Timer value registers - even and odd */ -#define TVR_ODD 0x0F -#define SRPR_EVEN 0x18 /* Shared RAM paging registers - even and odd */ -#define SRPR_ENABLE_PAGING 0xc0 -#define SRPR_ODD 0x19 /* Not used. */ -#define TOKREAD 0x60 -#define TOKOR 0x40 -#define TOKAND 0x20 -#define TOKWRITE 0x00 - -/* MMIO bits 5-6 select operation */ -/* 00 is used to write to a register */ -/* 01 is used to bitwise AND a byte with a register */ -/* 10 is used to bitwise OR a byte with a register */ -/* 11 is used to read from a register */ - -/* MMIO bits 7-8 select area of interest.. see below */ -/* 00 selects attachment control area. */ -/* 01 is reserved. */ -/* 10 selects adapter identification area A containing the adapter encoded - address. */ -/* 11 selects the adapter identification area B containing test patterns. */ - -#define PCCHANNELID 5049434F3631313039393020 -#define MCCHANNELID 4D4152533633583435313820 - -#define ACA_OFFSET 0x1e00 -#define ACA_SET 0x40 -#define ACA_RESET 0x20 -#define ACA_RW 0x00 - -#ifdef ENABLE_PAGING -#define SET_PAGE(x) (writeb((x), ti->mmio + ACA_OFFSET+ ACA_RW + SRPR_EVEN)) -#else -#define SET_PAGE(x) -#endif - -/* do_tok_int possible values */ -#define FIRST_INT 1 -#define NOT_FIRST 2 - -typedef enum { CLOSED, OPEN } open_state; -//staic const char *printstate[] = { "CLOSED","OPEN"}; - -struct tok_info { - unsigned char irq; - void __iomem *mmio; - unsigned char hw_address[32]; - unsigned char adapter_type; - unsigned char data_rate; - unsigned char token_release; - unsigned char avail_shared_ram; - unsigned char shared_ram_paging; - unsigned char turbo; - unsigned short dhb_size4mb; - unsigned short rbuf_len4; - unsigned short rbuf_cnt4; - unsigned short maxmtu4; - unsigned short dhb_size16mb; - unsigned short rbuf_len16; - unsigned short rbuf_cnt16; - unsigned short maxmtu16; - /* Additions by David Morris */ - unsigned char do_tok_int; - wait_queue_head_t wait_for_reset; - unsigned char sram_base; - /* Additions by Peter De Schrijver */ - unsigned char page_mask; /* mask to select RAM page to Map*/ - unsigned char mapped_ram_size; /* size of RAM page */ - __u32 sram_phys; /* Shared memory base address */ - void __iomem *sram_virt; /* Shared memory base address */ - void __iomem *init_srb; /* Initial System Request Block address */ - void __iomem *srb; /* System Request Block address */ - void __iomem *ssb; /* System Status Block address */ - void __iomem *arb; /* Adapter Request Block address */ - void __iomem *asb; /* Adapter Status Block address */ - __u8 init_srb_page; - __u8 srb_page; - __u8 ssb_page; - __u8 arb_page; - __u8 asb_page; - unsigned short exsap_station_id; - unsigned short global_int_enable; - struct sk_buff *current_skb; - - unsigned char auto_speedsave; - open_state open_status, sap_status; - enum {MANUAL, AUTOMATIC} open_mode; - enum {FAIL, RESTART, REOPEN} open_action; - enum {NO, YES} open_failure; - unsigned char readlog_pending; - unsigned short adapter_int_enable; /* Adapter-specific int enable */ - struct timer_list tr_timer; - unsigned char ring_speed; - spinlock_t lock; /* SMP protection */ -}; - -/* token ring adapter commands */ -#define DIR_INTERRUPT 0x00 /* struct srb_interrupt */ -#define DIR_MOD_OPEN_PARAMS 0x01 -#define DIR_OPEN_ADAPTER 0x03 /* struct dir_open_adapter */ -#define DIR_CLOSE_ADAPTER 0x04 -#define DIR_SET_GRP_ADDR 0x06 -#define DIR_SET_FUNC_ADDR 0x07 /* struct srb_set_funct_addr */ -#define DIR_READ_LOG 0x08 /* struct srb_read_log */ -#define DLC_OPEN_SAP 0x15 /* struct dlc_open_sap */ -#define DLC_CLOSE_SAP 0x16 -#define DATA_LOST 0x20 /* struct asb_rec */ -#define REC_DATA 0x81 /* struct arb_rec_req */ -#define XMIT_DATA_REQ 0x82 /* struct arb_xmit_req */ -#define DLC_STATUS 0x83 /* struct arb_dlc_status */ -#define RING_STAT_CHANGE 0x84 /* struct dlc_open_sap ??? */ - -/* DIR_OPEN_ADAPTER options */ -#define OPEN_PASS_BCON_MAC 0x0100 -#define NUM_RCV_BUF 2 -#define RCV_BUF_LEN 1024 -#define DHB_LENGTH 2048 -#define NUM_DHB 2 -#define DLC_MAX_SAP 2 -#define DLC_MAX_STA 1 - -/* DLC_OPEN_SAP options */ -#define MAX_I_FIELD 0x0088 -#define SAP_OPEN_IND_SAP 0x04 -#define SAP_OPEN_PRIORITY 0x20 -#define SAP_OPEN_STATION_CNT 0x1 -#define XMIT_DIR_FRAME 0x0A -#define XMIT_UI_FRAME 0x0d -#define XMIT_XID_CMD 0x0e -#define XMIT_TEST_CMD 0x11 - -/* srb close return code */ -#define SIGNAL_LOSS 0x8000 -#define HARD_ERROR 0x4000 -#define XMIT_BEACON 0x1000 -#define LOBE_FAULT 0x0800 -#define AUTO_REMOVAL 0x0400 -#define REMOVE_RECV 0x0100 -#define LOG_OVERFLOW 0x0080 -#define RING_RECOVER 0x0020 - -struct srb_init_response { - unsigned char command; - unsigned char init_status; - unsigned char init_status_2; - unsigned char reserved[3]; - __u16 bring_up_code; - __u16 encoded_address; - __u16 level_address; - __u16 adapter_address; - __u16 parms_address; - __u16 mac_address; -}; - -struct dir_open_adapter { - unsigned char command; - char reserved[7]; - __u16 open_options; - unsigned char node_address[6]; - unsigned char group_address[4]; - unsigned char funct_address[4]; - __u16 num_rcv_buf; - __u16 rcv_buf_len; - __u16 dhb_length; - unsigned char num_dhb; - char reserved2; - unsigned char dlc_max_sap; - unsigned char dlc_max_sta; - unsigned char dlc_max_gsap; - unsigned char dlc_max_gmem; - unsigned char dlc_t1_tick_1; - unsigned char dlc_t2_tick_1; - unsigned char dlc_ti_tick_1; - unsigned char dlc_t1_tick_2; - unsigned char dlc_t2_tick_2; - unsigned char dlc_ti_tick_2; - unsigned char product_id[18]; -}; - -struct dlc_open_sap { - unsigned char command; - unsigned char reserved1; - unsigned char ret_code; - unsigned char reserved2; - __u16 station_id; - unsigned char timer_t1; - unsigned char timer_t2; - unsigned char timer_ti; - unsigned char maxout; - unsigned char maxin; - unsigned char maxout_incr; - unsigned char max_retry_count; - unsigned char gsap_max_mem; - __u16 max_i_field; - unsigned char sap_value; - unsigned char sap_options; - unsigned char station_count; - unsigned char sap_gsap_mem; - unsigned char gsap[0]; -}; - -struct srb_xmit { - unsigned char command; - unsigned char cmd_corr; - unsigned char ret_code; - unsigned char reserved1; - __u16 station_id; -}; - -struct arb_rec_req { - unsigned char command; - unsigned char reserved1[3]; - __u16 station_id; - __u16 rec_buf_addr; - unsigned char lan_hdr_len; - unsigned char dlc_hdr_len; - __u16 frame_len; - unsigned char msg_type; -}; - -struct asb_rec { - unsigned char command; - unsigned char reserved1; - unsigned char ret_code; - unsigned char reserved2; - __u16 station_id; - __u16 rec_buf_addr; -}; - -struct rec_buf { - unsigned char reserved1[2]; - __u16 buf_ptr; - unsigned char reserved2; - unsigned char receive_fs; - __u16 buf_len; - unsigned char data[0]; -}; - -struct srb_set_funct_addr { - unsigned char command; - unsigned char reserved1; - unsigned char ret_code; - unsigned char reserved2[3]; - unsigned char funct_address[4]; -}; - -#endif |