summaryrefslogtreecommitdiffstats
path: root/include/linux/if_frad.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/if_frad.h')
-rw-r--r--include/linux/if_frad.h200
1 files changed, 200 insertions, 0 deletions
diff --git a/include/linux/if_frad.h b/include/linux/if_frad.h
new file mode 100644
index 00000000000..3c94b173657
--- /dev/null
+++ b/include/linux/if_frad.h
@@ -0,0 +1,200 @@
+/*
+ * DLCI/FRAD Definitions for Frame Relay Access Devices. DLCI devices are
+ * created for each DLCI associated with a FRAD. The FRAD driver
+ * is not truly a network device, but the lower level device
+ * handler. This allows other FRAD manufacturers to use the DLCI
+ * code, including its RFC1490 encapsulation alongside the current
+ * implementation for the Sangoma cards.
+ *
+ * Version: @(#)if_ifrad.h 0.15 31 Mar 96
+ *
+ * Author: Mike McLagan <mike.mclagan@linux.org>
+ *
+ * Changes:
+ * 0.15 Mike McLagan changed structure defs (packed)
+ * re-arranged flags
+ * added DLCI_RET vars
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _FRAD_H_
+#define _FRAD_H_
+
+#include <linux/config.h>
+#include <linux/if.h>
+
+#if defined(CONFIG_DLCI) || defined(CONFIG_DLCI_MODULE)
+
+/* Structures and constants associated with the DLCI device driver */
+
+struct dlci_add
+{
+ char devname[IFNAMSIZ];
+ short dlci;
+};
+
+#define DLCI_GET_CONF (SIOCDEVPRIVATE + 2)
+#define DLCI_SET_CONF (SIOCDEVPRIVATE + 3)
+
+/*
+ * These are related to the Sangoma SDLA and should remain in order.
+ * Code within the SDLA module is based on the specifics of this
+ * structure. Change at your own peril.
+ */
+struct dlci_conf {
+ short flags;
+ short CIR_fwd;
+ short Bc_fwd;
+ short Be_fwd;
+ short CIR_bwd;
+ short Bc_bwd;
+ short Be_bwd;
+
+/* these are part of the status read */
+ short Tc_fwd;
+ short Tc_bwd;
+ short Tf_max;
+ short Tb_max;
+
+/* add any new fields here above is a mirror of sdla_dlci_conf */
+};
+
+#define DLCI_GET_SLAVE (SIOCDEVPRIVATE + 4)
+
+/* configuration flags for DLCI */
+#define DLCI_IGNORE_CIR_OUT 0x0001
+#define DLCI_ACCOUNT_CIR_IN 0x0002
+#define DLCI_BUFFER_IF 0x0008
+
+#define DLCI_VALID_FLAGS 0x000B
+
+/* FRAD driver uses these to indicate what it did with packet */
+#define DLCI_RET_OK 0x00
+#define DLCI_RET_ERR 0x01
+#define DLCI_RET_DROP 0x02
+
+/* defines for the actual Frame Relay hardware */
+#define FRAD_GET_CONF (SIOCDEVPRIVATE)
+#define FRAD_SET_CONF (SIOCDEVPRIVATE + 1)
+
+#define FRAD_LAST_IOCTL FRAD_SET_CONF
+
+/*
+ * Based on the setup for the Sangoma SDLA. If changes are
+ * necessary to this structure, a routine will need to be
+ * added to that module to copy fields.
+ */
+struct frad_conf
+{
+ short station;
+ short flags;
+ short kbaud;
+ short clocking;
+ short mtu;
+ short T391;
+ short T392;
+ short N391;
+ short N392;
+ short N393;
+ short CIR_fwd;
+ short Bc_fwd;
+ short Be_fwd;
+ short CIR_bwd;
+ short Bc_bwd;
+ short Be_bwd;
+
+/* Add new fields here, above is a mirror of the sdla_conf */
+
+};
+
+#define FRAD_STATION_CPE 0x0000
+#define FRAD_STATION_NODE 0x0001
+
+#define FRAD_TX_IGNORE_CIR 0x0001
+#define FRAD_RX_ACCOUNT_CIR 0x0002
+#define FRAD_DROP_ABORTED 0x0004
+#define FRAD_BUFFERIF 0x0008
+#define FRAD_STATS 0x0010
+#define FRAD_MCI 0x0100
+#define FRAD_AUTODLCI 0x8000
+#define FRAD_VALID_FLAGS 0x811F
+
+#define FRAD_CLOCK_INT 0x0001
+#define FRAD_CLOCK_EXT 0x0000
+
+#ifdef __KERNEL__
+
+/* these are the fields of an RFC 1490 header */
+struct frhdr
+{
+ unsigned char control __attribute__((packed));
+
+ /* for IP packets, this can be the NLPID */
+ unsigned char pad __attribute__((packed));
+
+ unsigned char NLPID __attribute__((packed));
+ unsigned char OUI[3] __attribute__((packed));
+ unsigned short PID __attribute__((packed));
+
+#define IP_NLPID pad
+};
+
+/* see RFC 1490 for the definition of the following */
+#define FRAD_I_UI 0x03
+
+#define FRAD_P_PADDING 0x00
+#define FRAD_P_Q933 0x08
+#define FRAD_P_SNAP 0x80
+#define FRAD_P_CLNP 0x81
+#define FRAD_P_IP 0xCC
+
+struct dlci_local
+{
+ struct net_device_stats stats;
+ struct net_device *master;
+ struct net_device *slave;
+ struct dlci_conf config;
+ int configured;
+ struct list_head list;
+
+ /* callback function */
+ void (*receive)(struct sk_buff *skb, struct net_device *);
+};
+
+struct frad_local
+{
+ struct net_device_stats stats;
+
+ /* devices which this FRAD is slaved to */
+ struct net_device *master[CONFIG_DLCI_MAX];
+ short dlci[CONFIG_DLCI_MAX];
+
+ struct frad_conf config;
+ int configured; /* has this device been configured */
+ int initialized; /* mem_start, port, irq set ? */
+
+ /* callback functions */
+ int (*activate)(struct net_device *, struct net_device *);
+ int (*deactivate)(struct net_device *, struct net_device *);
+ int (*assoc)(struct net_device *, struct net_device *);
+ int (*deassoc)(struct net_device *, struct net_device *);
+ int (*dlci_conf)(struct net_device *, struct net_device *, int get);
+
+ /* fields that are used by the Sangoma SDLA cards */
+ struct timer_list timer;
+ int type; /* adapter type */
+ int state; /* state of the S502/8 control latch */
+ int buffer; /* current buffer for S508 firmware */
+};
+
+extern void dlci_ioctl_set(int (*hook)(unsigned int, void __user *));
+
+#endif /* __KERNEL__ */
+
+#endif /* CONFIG_DLCI || CONFIG_DLCI_MODULE */
+
+#endif