diff options
Diffstat (limited to 'include/linux/input')
| -rw-r--r-- | include/linux/input/adp5589.h | 157 | ||||
| -rw-r--r-- | include/linux/input/adxl34x.h | 21 |
2 files changed, 80 insertions, 98 deletions
diff --git a/include/linux/input/adp5589.h b/include/linux/input/adp5589.h index ef792ecfaab..1a05eee15e6 100644 --- a/include/linux/input/adp5589.h +++ b/include/linux/input/adp5589.h @@ -1,5 +1,5 @@ /* - * Analog Devices ADP5589 I/O Expander and QWERTY Keypad Controller + * Analog Devices ADP5589/ADP5585 I/O Expander and QWERTY Keypad Controller * * Copyright 2010-2011 Analog Devices Inc. * @@ -9,89 +9,9 @@ #ifndef _ADP5589_H #define _ADP5589_H -#define ADP5589_ID 0x00 -#define ADP5589_INT_STATUS 0x01 -#define ADP5589_STATUS 0x02 -#define ADP5589_FIFO_1 0x03 -#define ADP5589_FIFO_2 0x04 -#define ADP5589_FIFO_3 0x05 -#define ADP5589_FIFO_4 0x06 -#define ADP5589_FIFO_5 0x07 -#define ADP5589_FIFO_6 0x08 -#define ADP5589_FIFO_7 0x09 -#define ADP5589_FIFO_8 0x0A -#define ADP5589_FIFO_9 0x0B -#define ADP5589_FIFO_10 0x0C -#define ADP5589_FIFO_11 0x0D -#define ADP5589_FIFO_12 0x0E -#define ADP5589_FIFO_13 0x0F -#define ADP5589_FIFO_14 0x10 -#define ADP5589_FIFO_15 0x11 -#define ADP5589_FIFO_16 0x12 -#define ADP5589_GPI_INT_STAT_A 0x13 -#define ADP5589_GPI_INT_STAT_B 0x14 -#define ADP5589_GPI_INT_STAT_C 0x15 -#define ADP5589_GPI_STATUS_A 0x16 -#define ADP5589_GPI_STATUS_B 0x17 -#define ADP5589_GPI_STATUS_C 0x18 -#define ADP5589_RPULL_CONFIG_A 0x19 -#define ADP5589_RPULL_CONFIG_B 0x1A -#define ADP5589_RPULL_CONFIG_C 0x1B -#define ADP5589_RPULL_CONFIG_D 0x1C -#define ADP5589_RPULL_CONFIG_E 0x1D -#define ADP5589_GPI_INT_LEVEL_A 0x1E -#define ADP5589_GPI_INT_LEVEL_B 0x1F -#define ADP5589_GPI_INT_LEVEL_C 0x20 -#define ADP5589_GPI_EVENT_EN_A 0x21 -#define ADP5589_GPI_EVENT_EN_B 0x22 -#define ADP5589_GPI_EVENT_EN_C 0x23 -#define ADP5589_GPI_INTERRUPT_EN_A 0x24 -#define ADP5589_GPI_INTERRUPT_EN_B 0x25 -#define ADP5589_GPI_INTERRUPT_EN_C 0x26 -#define ADP5589_DEBOUNCE_DIS_A 0x27 -#define ADP5589_DEBOUNCE_DIS_B 0x28 -#define ADP5589_DEBOUNCE_DIS_C 0x29 -#define ADP5589_GPO_DATA_OUT_A 0x2A -#define ADP5589_GPO_DATA_OUT_B 0x2B -#define ADP5589_GPO_DATA_OUT_C 0x2C -#define ADP5589_GPO_OUT_MODE_A 0x2D -#define ADP5589_GPO_OUT_MODE_B 0x2E -#define ADP5589_GPO_OUT_MODE_C 0x2F -#define ADP5589_GPIO_DIRECTION_A 0x30 -#define ADP5589_GPIO_DIRECTION_B 0x31 -#define ADP5589_GPIO_DIRECTION_C 0x32 -#define ADP5589_UNLOCK1 0x33 -#define ADP5589_UNLOCK2 0x34 -#define ADP5589_EXT_LOCK_EVENT 0x35 -#define ADP5589_UNLOCK_TIMERS 0x36 -#define ADP5589_LOCK_CFG 0x37 -#define ADP5589_RESET1_EVENT_A 0x38 -#define ADP5589_RESET1_EVENT_B 0x39 -#define ADP5589_RESET1_EVENT_C 0x3A -#define ADP5589_RESET2_EVENT_A 0x3B -#define ADP5589_RESET2_EVENT_B 0x3C -#define ADP5589_RESET_CFG 0x3D -#define ADP5589_PWM_OFFT_LOW 0x3E -#define ADP5589_PWM_OFFT_HIGH 0x3F -#define ADP5589_PWM_ONT_LOW 0x40 -#define ADP5589_PWM_ONT_HIGH 0x41 -#define ADP5589_PWM_CFG 0x42 -#define ADP5589_CLOCK_DIV_CFG 0x43 -#define ADP5589_LOGIC_1_CFG 0x44 -#define ADP5589_LOGIC_2_CFG 0x45 -#define ADP5589_LOGIC_FF_CFG 0x46 -#define ADP5589_LOGIC_INT_EVENT_EN 0x47 -#define ADP5589_POLL_PTIME_CFG 0x48 -#define ADP5589_PIN_CONFIG_A 0x49 -#define ADP5589_PIN_CONFIG_B 0x4A -#define ADP5589_PIN_CONFIG_C 0x4B -#define ADP5589_PIN_CONFIG_D 0x4C -#define ADP5589_GENERAL_CFG 0x4D -#define ADP5589_INT_EN 0x4E - -#define ADP5589_DEVICE_ID_MASK 0xF - -/* Put one of these structures in i2c_board_info platform_data */ +/* + * ADP5589 specific GPI and Keymap defines + */ #define ADP5589_KEYMAPSIZE 88 @@ -127,6 +47,35 @@ #define ADP5589_GPIMAPSIZE_MAX (ADP5589_GPI_PIN_END - ADP5589_GPI_PIN_BASE + 1) +/* + * ADP5585 specific GPI and Keymap defines + */ + +#define ADP5585_KEYMAPSIZE 30 + +#define ADP5585_GPI_PIN_ROW0 37 +#define ADP5585_GPI_PIN_ROW1 38 +#define ADP5585_GPI_PIN_ROW2 39 +#define ADP5585_GPI_PIN_ROW3 40 +#define ADP5585_GPI_PIN_ROW4 41 +#define ADP5585_GPI_PIN_ROW5 42 +#define ADP5585_GPI_PIN_COL0 43 +#define ADP5585_GPI_PIN_COL1 44 +#define ADP5585_GPI_PIN_COL2 45 +#define ADP5585_GPI_PIN_COL3 46 +#define ADP5585_GPI_PIN_COL4 47 +#define GPI_LOGIC 48 + +#define ADP5585_GPI_PIN_ROW_BASE ADP5585_GPI_PIN_ROW0 +#define ADP5585_GPI_PIN_ROW_END ADP5585_GPI_PIN_ROW5 +#define ADP5585_GPI_PIN_COL_BASE ADP5585_GPI_PIN_COL0 +#define ADP5585_GPI_PIN_COL_END ADP5585_GPI_PIN_COL4 + +#define ADP5585_GPI_PIN_BASE ADP5585_GPI_PIN_ROW_BASE +#define ADP5585_GPI_PIN_END ADP5585_GPI_PIN_COL_END + +#define ADP5585_GPIMAPSIZE_MAX (ADP5585_GPI_PIN_END - ADP5585_GPI_PIN_BASE + 1) + struct adp5589_gpi_map { unsigned short pin; unsigned short sw_evt; @@ -159,7 +108,7 @@ struct adp5589_gpi_map { #define RESET2_POL_HIGH (1 << 7) #define RESET2_POL_LOW (0 << 7) -/* Mask Bits: +/* ADP5589 Mask Bits: * C C C C C C C C C C C | R R R R R R R R * 1 9 8 7 6 5 4 3 2 1 0 | 7 6 5 4 3 2 1 0 * 0 @@ -168,18 +117,44 @@ struct adp5589_gpi_map { * 8 7 6 5 4 3 2 1 0 9 8 | 7 6 5 4 3 2 1 0 */ -#define ADP_ROW(x) (1 << (x)) -#define ADP_COL(x) (1 << (x + 8)) +#define ADP_ROW(x) (1 << (x)) +#define ADP_COL(x) (1 << (x + 8)) +#define ADP5589_ROW_MASK 0xFF +#define ADP5589_COL_MASK 0xFF +#define ADP5589_COL_SHIFT 8 +#define ADP5589_MAX_ROW_NUM 7 +#define ADP5589_MAX_COL_NUM 10 + +/* ADP5585 Mask Bits: + * C C C C C | R R R R R R + * 4 3 2 1 0 | 5 4 3 2 1 0 + * + * ---- BIT -- ----------- + * 1 0 0 0 0 | 0 0 0 0 0 0 + * 0 9 8 7 6 | 5 4 3 2 1 0 + */ + +#define ADP5585_ROW_MASK 0x3F +#define ADP5585_COL_MASK 0x1F +#define ADP5585_ROW_SHIFT 0 +#define ADP5585_COL_SHIFT 6 +#define ADP5585_MAX_ROW_NUM 5 +#define ADP5585_MAX_COL_NUM 4 + +#define ADP5585_ROW(x) (1 << ((x) & ADP5585_ROW_MASK)) +#define ADP5585_COL(x) (1 << (((x) & ADP5585_COL_MASK) + ADP5585_COL_SHIFT)) + +/* Put one of these structures in i2c_board_info platform_data */ struct adp5589_kpad_platform_data { unsigned keypad_en_mask; /* Keypad (Rows/Columns) enable mask */ const unsigned short *keymap; /* Pointer to keymap */ unsigned short keymapsize; /* Keymap size */ bool repeat; /* Enable key repeat */ - bool en_keylock; /* Enable key lock feature */ - unsigned char unlock_key1; /* Unlock Key 1 */ - unsigned char unlock_key2; /* Unlock Key 2 */ - unsigned char unlock_timer; /* Time in seconds [0..7] between the two unlock keys 0=disable */ + bool en_keylock; /* Enable key lock feature (ADP5589 only)*/ + unsigned char unlock_key1; /* Unlock Key 1 (ADP5589 only) */ + unsigned char unlock_key2; /* Unlock Key 2 (ADP5589 only) */ + unsigned char unlock_timer; /* Time in seconds [0..7] between the two unlock keys 0=disable (ADP5589 only) */ unsigned char scan_cycle_time; /* Time between consecutive scan cycles */ unsigned char reset_cfg; /* Reset config */ unsigned short reset1_key_1; /* Reset Key 1 */ diff --git a/include/linux/input/adxl34x.h b/include/linux/input/adxl34x.h index df00d998a44..57e01a7cb00 100644 --- a/include/linux/input/adxl34x.h +++ b/include/linux/input/adxl34x.h @@ -30,8 +30,9 @@ struct adxl34x_platform_data { * Y, or Z participation in Tap detection. A '0' excludes the * selected axis from participation in Tap detection. * Setting the SUPPRESS bit suppresses Double Tap detection if - * acceleration greater than tap_threshold is present between - * taps. + * acceleration greater than tap_threshold is present during the + * tap_latency period, i.e. after the first tap but before the + * opening of the second tap window. */ #define ADXL_SUPPRESS (1 << 3) @@ -226,13 +227,13 @@ struct adxl34x_platform_data { * detection will begin and prevent the detection of activity. This * bit serially links the activity and inactivity functions. When '0' * the inactivity and activity functions are concurrent. Additional - * information can be found in the Application section under Link - * Mode. + * information can be found in the ADXL34x datasheet's Application + * section under Link Mode. * AUTO_SLEEP: A '1' sets the ADXL34x to switch to Sleep Mode * when inactivity (acceleration has been below inactivity_threshold * for at least inactivity_time) is detected and the LINK bit is set. - * A '0' disables automatic switching to Sleep Mode. See SLEEP - * for further description. + * A '0' disables automatic switching to Sleep Mode. See the + * Sleep Bit section of the ADXL34x datasheet for more information. */ #define ADXL_LINK (1 << 5) @@ -266,6 +267,12 @@ struct adxl34x_platform_data { u8 watermark; + /* + * When acceleration measurements are received from the ADXL34x + * events are sent to the event subsystem. The following settings + * select the event type and event code for new x, y and z axis data + * respectively. + */ u32 ev_type; /* EV_ABS or EV_REL */ u32 ev_code_x; /* ABS_X,Y,Z or REL_X,Y,Z */ @@ -289,7 +296,7 @@ struct adxl34x_platform_data { u32 ev_code_act_inactivity; /* EV_KEY */ /* - * Use ADXL34x INT2 instead of INT1 + * Use ADXL34x INT2 pin instead of INT1 pin for interrupt output */ u8 use_int2; |