summaryrefslogtreecommitdiffstats
path: root/include/linux/ipmi_msgdefs.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/ipmi_msgdefs.h')
-rw-r--r--include/linux/ipmi_msgdefs.h13
1 files changed, 11 insertions, 2 deletions
diff --git a/include/linux/ipmi_msgdefs.h b/include/linux/ipmi_msgdefs.h
index 4d04d8b58a0..b56a158d587 100644
--- a/include/linux/ipmi_msgdefs.h
+++ b/include/linux/ipmi_msgdefs.h
@@ -46,6 +46,8 @@
#define IPMI_NETFN_APP_REQUEST 0x06
#define IPMI_NETFN_APP_RESPONSE 0x07
#define IPMI_GET_DEVICE_ID_CMD 0x01
+#define IPMI_COLD_RESET_CMD 0x02
+#define IPMI_WARM_RESET_CMD 0x03
#define IPMI_CLEAR_MSG_FLAGS_CMD 0x30
#define IPMI_GET_DEVICE_GUID_CMD 0x08
#define IPMI_GET_MSG_FLAGS_CMD 0x31
@@ -60,20 +62,27 @@
#define IPMI_NETFN_STORAGE_RESPONSE 0x0b
#define IPMI_ADD_SEL_ENTRY_CMD 0x44
+#define IPMI_NETFN_FIRMWARE_REQUEST 0x08
+#define IPMI_NETFN_FIRMWARE_RESPONSE 0x09
+
/* The default slave address */
#define IPMI_BMC_SLAVE_ADDR 0x20
/* The BT interface on high-end HP systems supports up to 255 bytes in
* one transfer. Its "virtual" BMC supports some commands that are longer
* than 128 bytes. Use the full 256, plus NetFn/LUN, Cmd, cCode, plus
- * some overhead. It would be nice to base this on the "BT Capabilities"
- * but that's too hard to propagate to the rest of the driver. */
+ * some overhead; it's not worth the effort to dynamically size this based
+ * on the results of the "Get BT Capabilities" command. */
#define IPMI_MAX_MSG_LENGTH 272 /* multiple of 16 */
#define IPMI_CC_NO_ERROR 0x00
#define IPMI_NODE_BUSY_ERR 0xc0
#define IPMI_INVALID_COMMAND_ERR 0xc1
+#define IPMI_TIMEOUT_ERR 0xc3
#define IPMI_ERR_MSG_TRUNCATED 0xc6
+#define IPMI_REQ_LEN_INVALID_ERR 0xc7
+#define IPMI_REQ_LEN_EXCEEDED_ERR 0xc8
+#define IPMI_NOT_IN_MY_STATE_ERR 0xd5 /* IPMI 2.0 */
#define IPMI_LOST_ARBITRATION_ERR 0x81
#define IPMI_BUS_ERR 0x82
#define IPMI_NAK_ON_WRITE_ERR 0x83