diff options
Diffstat (limited to 'include/linux/libata.h')
| -rw-r--r-- | include/linux/libata.h | 67 |
1 files changed, 67 insertions, 0 deletions
diff --git a/include/linux/libata.h b/include/linux/libata.h index bd0df84cfd8..973090be7fc 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -416,6 +416,7 @@ extern u8 ata_chk_err(struct ata_port *ap); extern void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf); extern int ata_port_start (struct ata_port *ap); extern void ata_port_stop (struct ata_port *ap); +extern void ata_host_stop (struct ata_host_set *host_set); extern irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs); extern void ata_qc_prep(struct ata_queued_cmd *qc); extern int ata_qc_issue_prot(struct ata_queued_cmd *qc); @@ -426,6 +427,7 @@ extern void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, extern unsigned int ata_dev_classify(struct ata_taskfile *tf); extern void ata_dev_id_string(u16 *id, unsigned char *s, unsigned int ofs, unsigned int len); +extern void ata_dev_config(struct ata_port *ap, unsigned int i); extern void ata_bmdma_setup (struct ata_queued_cmd *qc); extern void ata_bmdma_start (struct ata_queued_cmd *qc); extern void ata_bmdma_stop(struct ata_port *ap); @@ -472,12 +474,34 @@ static inline u8 ata_chk_status(struct ata_port *ap) return ap->ops->check_status(ap); } + +/** + * ata_pause - Flush writes and pause 400 nanoseconds. + * @ap: Port to wait for. + * + * LOCKING: + * Inherited from caller. + */ + static inline void ata_pause(struct ata_port *ap) { ata_altstatus(ap); ndelay(400); } + +/** + * ata_busy_wait - Wait for a port status register + * @ap: Port to wait for. + * + * Waits up to max*10 microseconds for the selected bits in the port's + * status register to be cleared. + * Returns final value of status register. + * + * LOCKING: + * Inherited from caller. + */ + static inline u8 ata_busy_wait(struct ata_port *ap, unsigned int bits, unsigned int max) { @@ -492,6 +516,18 @@ static inline u8 ata_busy_wait(struct ata_port *ap, unsigned int bits, return status; } + +/** + * ata_wait_idle - Wait for a port to be idle. + * @ap: Port to wait for. + * + * Waits up to 10ms for port's BUSY and DRQ signals to clear. + * Returns final value of status register. + * + * LOCKING: + * Inherited from caller. + */ + static inline u8 ata_wait_idle(struct ata_port *ap) { u8 status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000); @@ -530,6 +566,18 @@ static inline void ata_tf_init(struct ata_port *ap, struct ata_taskfile *tf, uns tf->device = ATA_DEVICE_OBS | ATA_DEV1; } + +/** + * ata_irq_on - Enable interrupts on a port. + * @ap: Port on which interrupts are enabled. + * + * Enable interrupts on a legacy IDE device using MMIO or PIO, + * wait for idle, clear any pending interrupts. + * + * LOCKING: + * Inherited from caller. + */ + static inline u8 ata_irq_on(struct ata_port *ap) { struct ata_ioports *ioaddr = &ap->ioaddr; @@ -549,6 +597,18 @@ static inline u8 ata_irq_on(struct ata_port *ap) return tmp; } + +/** + * ata_irq_ack - Acknowledge a device interrupt. + * @ap: Port on which interrupts are enabled. + * + * Wait up to 10 ms for legacy IDE device to become idle (BUSY + * or BUSY+DRQ clear). Obtain dma status and port status from + * device. Clear the interrupt. Return port status. + * + * LOCKING: + */ + static inline u8 ata_irq_ack(struct ata_port *ap, unsigned int chk_drq) { unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY; @@ -590,6 +650,13 @@ static inline void scr_write(struct ata_port *ap, unsigned int reg, u32 val) ap->ops->scr_write(ap, reg, val); } +static inline void scr_write_flush(struct ata_port *ap, unsigned int reg, + u32 val) +{ + ap->ops->scr_write(ap, reg, val); + (void) ap->ops->scr_read(ap, reg); +} + static inline unsigned int sata_dev_present(struct ata_port *ap) { return ((scr_read(ap, SCR_STATUS) & 0xf) == 0x3) ? 1 : 0; |