summaryrefslogtreecommitdiffstats
path: root/include/linux/mfd/max77686.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/mfd/max77686.h')
-rw-r--r--include/linux/mfd/max77686.h117
1 files changed, 117 insertions, 0 deletions
diff --git a/include/linux/mfd/max77686.h b/include/linux/mfd/max77686.h
new file mode 100644
index 00000000000..fcf312678ca
--- /dev/null
+++ b/include/linux/mfd/max77686.h
@@ -0,0 +1,117 @@
+/*
+ * max77686.h - Driver for the Maxim 77686
+ *
+ * Copyright (C) 2012 Samsung Electrnoics
+ * Chiwoong Byun <woong.byun@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * This driver is based on max8997.h
+ *
+ * MAX77686 has PMIC, RTC devices.
+ * The devices share the same I2C bus and included in
+ * this mfd driver.
+ */
+
+#ifndef __LINUX_MFD_MAX77686_H
+#define __LINUX_MFD_MAX77686_H
+
+#include <linux/regulator/consumer.h>
+
+/* MAX77686 regulator IDs */
+enum max77686_regulators {
+ MAX77686_LDO1 = 0,
+ MAX77686_LDO2,
+ MAX77686_LDO3,
+ MAX77686_LDO4,
+ MAX77686_LDO5,
+ MAX77686_LDO6,
+ MAX77686_LDO7,
+ MAX77686_LDO8,
+ MAX77686_LDO9,
+ MAX77686_LDO10,
+ MAX77686_LDO11,
+ MAX77686_LDO12,
+ MAX77686_LDO13,
+ MAX77686_LDO14,
+ MAX77686_LDO15,
+ MAX77686_LDO16,
+ MAX77686_LDO17,
+ MAX77686_LDO18,
+ MAX77686_LDO19,
+ MAX77686_LDO20,
+ MAX77686_LDO21,
+ MAX77686_LDO22,
+ MAX77686_LDO23,
+ MAX77686_LDO24,
+ MAX77686_LDO25,
+ MAX77686_LDO26,
+ MAX77686_BUCK1,
+ MAX77686_BUCK2,
+ MAX77686_BUCK3,
+ MAX77686_BUCK4,
+ MAX77686_BUCK5,
+ MAX77686_BUCK6,
+ MAX77686_BUCK7,
+ MAX77686_BUCK8,
+ MAX77686_BUCK9,
+ MAX77686_EN32KHZ_AP,
+ MAX77686_EN32KHZ_CP,
+ MAX77686_P32KH,
+
+ MAX77686_REG_MAX,
+};
+
+struct max77686_regulator_data {
+ int id;
+ struct regulator_init_data *initdata;
+};
+
+enum max77686_opmode {
+ MAX77686_OPMODE_NORMAL,
+ MAX77686_OPMODE_LP,
+ MAX77686_OPMODE_STANDBY,
+};
+
+struct max77686_opmode_data {
+ int id;
+ int mode;
+};
+
+struct max77686_platform_data {
+ /* IRQ */
+ int irq_gpio;
+ int ono;
+ int wakeup;
+
+ /* ---- PMIC ---- */
+ struct max77686_regulator_data *regulators;
+ int num_regulators;
+
+ struct max77686_opmode_data *opmode_data;
+
+ /*
+ * GPIO-DVS feature is not enabled with the current version of
+ * MAX77686 driver. Buck2/3/4_voltages[0] is used as the default
+ * voltage at probe. DVS/SELB gpios are set as OUTPUT-LOW.
+ */
+ int buck234_gpio_dvs[3]; /* GPIO of [0]DVS1, [1]DVS2, [2]DVS3 */
+ int buck234_gpio_selb[3]; /* [0]SELB2, [1]SELB3, [2]SELB4 */
+ unsigned int buck2_voltage[8]; /* buckx_voltage in uV */
+ unsigned int buck3_voltage[8];
+ unsigned int buck4_voltage[8];
+};
+
+#endif /* __LINUX_MFD_MAX77686_H */