diff options
Diffstat (limited to 'include/linux/mfd/max8997.h')
| -rw-r--r-- | include/linux/mfd/max8997.h | 117 |
1 files changed, 117 insertions, 0 deletions
diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h new file mode 100644 index 00000000000..60931d08942 --- /dev/null +++ b/include/linux/mfd/max8997.h @@ -0,0 +1,117 @@ +/* + * max8997.h - Driver for the Maxim 8997/8966 + * + * Copyright (C) 2009-2010 Samsung Electrnoics + * MyungJoo Ham <myungjoo.ham@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * This driver is based on max8998.h + * + * MAX8997 has PMIC, MUIC, HAPTIC, RTC, FLASH, and Fuel Gauge devices. + * Except Fuel Gauge, every device shares the same I2C bus and included in + * this mfd driver. Although the fuel gauge is included in the chip, it is + * excluded from the driver because a) it has a different I2C bus from + * others and b) it can be enabled simply by using MAX17042 driver. + */ + +#ifndef __LINUX_MFD_MAX8998_H +#define __LINUX_MFD_MAX8998_H + +#include <linux/regulator/consumer.h> + +/* MAX8997/8966 regulator IDs */ +enum max8998_regulators { + MAX8997_LDO1 = 0, + MAX8997_LDO2, + MAX8997_LDO3, + MAX8997_LDO4, + MAX8997_LDO5, + MAX8997_LDO6, + MAX8997_LDO7, + MAX8997_LDO8, + MAX8997_LDO9, + MAX8997_LDO10, + MAX8997_LDO11, + MAX8997_LDO12, + MAX8997_LDO13, + MAX8997_LDO14, + MAX8997_LDO15, + MAX8997_LDO16, + MAX8997_LDO17, + MAX8997_LDO18, + MAX8997_LDO21, + MAX8997_BUCK1, + MAX8997_BUCK2, + MAX8997_BUCK3, + MAX8997_BUCK4, + MAX8997_BUCK5, + MAX8997_BUCK6, + MAX8997_BUCK7, + MAX8997_EN32KHZ_AP, + MAX8997_EN32KHZ_CP, + MAX8997_ENVICHG, + MAX8997_ESAFEOUT1, + MAX8997_ESAFEOUT2, + MAX8997_CHARGER_CV, /* control MBCCV of MBCCTRL3 */ + MAX8997_CHARGER, /* charger current, MBCCTRL4 */ + MAX8997_CHARGER_TOPOFF, /* MBCCTRL5 */ + + MAX8997_REG_MAX, +}; + +struct max8997_regulator_data { + int id; + struct regulator_init_data *initdata; +}; + +struct max8997_platform_data { + /* IRQ */ + int irq_base; + int ono; + int wakeup; + + /* ---- PMIC ---- */ + struct max8997_regulator_data *regulators; + int num_regulators; + + /* + * SET1~3 DVS GPIOs control Buck1, 2, and 5 simultaneously. Therefore, + * With buckx_gpiodvs enabled, the buckx cannot be controlled + * independently. To control buckx (of 1, 2, and 5) independently, + * disable buckx_gpiodvs and control with BUCKxDVS1 register. + * + * When buckx_gpiodvs and bucky_gpiodvs are both enabled, set_voltage + * on buckx will change the voltage of bucky at the same time. + * + */ + bool ignore_gpiodvs_side_effect; + int buck125_gpios[3]; /* GPIO of [0]SET1, [1]SET2, [2]SET3 */ + int buck125_default_idx; /* Default value of SET1, 2, 3 */ + unsigned int buck1_voltage[8]; /* buckx_voltage in uV */ + bool buck1_gpiodvs; + unsigned int buck2_voltage[8]; + bool buck2_gpiodvs; + unsigned int buck5_voltage[8]; + bool buck5_gpiodvs; + + /* MUIC: Not implemented */ + /* HAPTIC: Not implemented */ + /* RTC: Not implemented */ + /* Flash: Not implemented */ + /* Charger control: Not implemented */ +}; + +#endif /* __LINUX_MFD_MAX8998_H */ |