diff options
Diffstat (limited to 'include/linux/mfd/rc5t583.h')
-rw-r--r-- | include/linux/mfd/rc5t583.h | 295 |
1 files changed, 295 insertions, 0 deletions
diff --git a/include/linux/mfd/rc5t583.h b/include/linux/mfd/rc5t583.h new file mode 100644 index 00000000000..a2c61609d21 --- /dev/null +++ b/include/linux/mfd/rc5t583.h @@ -0,0 +1,295 @@ +/* + * Core driver interface to access RICOH_RC5T583 power management chip. + * + * Copyright (c) 2011-2012, NVIDIA CORPORATION. All rights reserved. + * Author: Laxman dewangan <ldewangan@nvidia.com> + * + * Based on code + * Copyright (C) 2011 RICOH COMPANY,LTD + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + */ + +#ifndef __LINUX_MFD_RC5T583_H +#define __LINUX_MFD_RC5T583_H + +#include <linux/mutex.h> +#include <linux/types.h> + +#define RC5T583_MAX_REGS 0xF8 + +/* Maximum number of main interrupts */ +#define MAX_MAIN_INTERRUPT 5 +#define RC5T583_MAX_GPEDGE_REG 2 +#define RC5T583_MAX_INTERRUPT_MASK_REGS 9 + +/* Interrupt enable register */ +#define RC5T583_INT_EN_SYS1 0x19 +#define RC5T583_INT_EN_SYS2 0x1D +#define RC5T583_INT_EN_DCDC 0x41 +#define RC5T583_INT_EN_RTC 0xED +#define RC5T583_INT_EN_ADC1 0x90 +#define RC5T583_INT_EN_ADC2 0x91 +#define RC5T583_INT_EN_ADC3 0x92 + +/* Interrupt status registers (monitor regs in Ricoh)*/ +#define RC5T583_INTC_INTPOL 0xAD +#define RC5T583_INTC_INTEN 0xAE +#define RC5T583_INTC_INTMON 0xAF + +#define RC5T583_INT_MON_GRP 0xAF +#define RC5T583_INT_MON_SYS1 0x1B +#define RC5T583_INT_MON_SYS2 0x1F +#define RC5T583_INT_MON_DCDC 0x43 +#define RC5T583_INT_MON_RTC 0xEE + +/* Interrupt clearing registers */ +#define RC5T583_INT_IR_SYS1 0x1A +#define RC5T583_INT_IR_SYS2 0x1E +#define RC5T583_INT_IR_DCDC 0x42 +#define RC5T583_INT_IR_RTC 0xEE +#define RC5T583_INT_IR_ADCL 0x94 +#define RC5T583_INT_IR_ADCH 0x95 +#define RC5T583_INT_IR_ADCEND 0x96 +#define RC5T583_INT_IR_GPIOR 0xA9 +#define RC5T583_INT_IR_GPIOF 0xAA + +/* Sleep sequence registers */ +#define RC5T583_SLPSEQ1 0x21 +#define RC5T583_SLPSEQ2 0x22 +#define RC5T583_SLPSEQ3 0x23 +#define RC5T583_SLPSEQ4 0x24 +#define RC5T583_SLPSEQ5 0x25 +#define RC5T583_SLPSEQ6 0x26 +#define RC5T583_SLPSEQ7 0x27 +#define RC5T583_SLPSEQ8 0x28 +#define RC5T583_SLPSEQ9 0x29 +#define RC5T583_SLPSEQ10 0x2A +#define RC5T583_SLPSEQ11 0x2B + +/* Regulator registers */ +#define RC5T583_REG_DC0CTL 0x30 +#define RC5T583_REG_DC0DAC 0x31 +#define RC5T583_REG_DC0LATCTL 0x32 +#define RC5T583_REG_SR0CTL 0x33 + +#define RC5T583_REG_DC1CTL 0x34 +#define RC5T583_REG_DC1DAC 0x35 +#define RC5T583_REG_DC1LATCTL 0x36 +#define RC5T583_REG_SR1CTL 0x37 + +#define RC5T583_REG_DC2CTL 0x38 +#define RC5T583_REG_DC2DAC 0x39 +#define RC5T583_REG_DC2LATCTL 0x3A +#define RC5T583_REG_SR2CTL 0x3B + +#define RC5T583_REG_DC3CTL 0x3C +#define RC5T583_REG_DC3DAC 0x3D +#define RC5T583_REG_DC3LATCTL 0x3E +#define RC5T583_REG_SR3CTL 0x3F + + +#define RC5T583_REG_LDOEN1 0x50 +#define RC5T583_REG_LDOEN2 0x51 +#define RC5T583_REG_LDODIS1 0x52 +#define RC5T583_REG_LDODIS2 0x53 + +#define RC5T583_REG_LDO0DAC 0x54 +#define RC5T583_REG_LDO1DAC 0x55 +#define RC5T583_REG_LDO2DAC 0x56 +#define RC5T583_REG_LDO3DAC 0x57 +#define RC5T583_REG_LDO4DAC 0x58 +#define RC5T583_REG_LDO5DAC 0x59 +#define RC5T583_REG_LDO6DAC 0x5A +#define RC5T583_REG_LDO7DAC 0x5B +#define RC5T583_REG_LDO8DAC 0x5C +#define RC5T583_REG_LDO9DAC 0x5D + +#define RC5T583_REG_DC0DAC_DS 0x60 +#define RC5T583_REG_DC1DAC_DS 0x61 +#define RC5T583_REG_DC2DAC_DS 0x62 +#define RC5T583_REG_DC3DAC_DS 0x63 + +#define RC5T583_REG_LDO0DAC_DS 0x64 +#define RC5T583_REG_LDO1DAC_DS 0x65 +#define RC5T583_REG_LDO2DAC_DS 0x66 +#define RC5T583_REG_LDO3DAC_DS 0x67 +#define RC5T583_REG_LDO4DAC_DS 0x68 +#define RC5T583_REG_LDO5DAC_DS 0x69 +#define RC5T583_REG_LDO6DAC_DS 0x6A +#define RC5T583_REG_LDO7DAC_DS 0x6B +#define RC5T583_REG_LDO8DAC_DS 0x6C +#define RC5T583_REG_LDO9DAC_DS 0x6D + +/* GPIO register base address */ +#define RC5T583_GPIO_IOSEL 0xA0 +#define RC5T583_GPIO_PDEN 0xA1 +#define RC5T583_GPIO_IOOUT 0xA2 +#define RC5T583_GPIO_PGSEL 0xA3 +#define RC5T583_GPIO_GPINV 0xA4 +#define RC5T583_GPIO_GPDEB 0xA5 +#define RC5T583_GPIO_GPEDGE1 0xA6 +#define RC5T583_GPIO_GPEDGE2 0xA7 +#define RC5T583_GPIO_EN_INT 0xA8 +#define RC5T583_GPIO_MON_IOIN 0xAB +#define RC5T583_GPIO_GPOFUNC 0xAC + +/* RICOH_RC5T583 IRQ definitions */ +enum { + RC5T583_IRQ_ONKEY, + RC5T583_IRQ_ACOK, + RC5T583_IRQ_LIDOPEN, + RC5T583_IRQ_PREOT, + RC5T583_IRQ_CLKSTP, + RC5T583_IRQ_ONKEY_OFF, + RC5T583_IRQ_WD, + RC5T583_IRQ_EN_PWRREQ1, + RC5T583_IRQ_EN_PWRREQ2, + RC5T583_IRQ_PRE_VINDET, + + RC5T583_IRQ_DC0LIM, + RC5T583_IRQ_DC1LIM, + RC5T583_IRQ_DC2LIM, + RC5T583_IRQ_DC3LIM, + + RC5T583_IRQ_CTC, + RC5T583_IRQ_YALE, + RC5T583_IRQ_DALE, + RC5T583_IRQ_WALE, + + RC5T583_IRQ_AIN1L, + RC5T583_IRQ_AIN2L, + RC5T583_IRQ_AIN3L, + RC5T583_IRQ_VBATL, + RC5T583_IRQ_VIN3L, + RC5T583_IRQ_VIN8L, + RC5T583_IRQ_AIN1H, + RC5T583_IRQ_AIN2H, + RC5T583_IRQ_AIN3H, + RC5T583_IRQ_VBATH, + RC5T583_IRQ_VIN3H, + RC5T583_IRQ_VIN8H, + RC5T583_IRQ_ADCEND, + + RC5T583_IRQ_GPIO0, + RC5T583_IRQ_GPIO1, + RC5T583_IRQ_GPIO2, + RC5T583_IRQ_GPIO3, + RC5T583_IRQ_GPIO4, + RC5T583_IRQ_GPIO5, + RC5T583_IRQ_GPIO6, + RC5T583_IRQ_GPIO7, + + /* Should be last entry */ + RC5T583_MAX_IRQS, +}; + +/* Ricoh583 gpio definitions */ +enum { + RC5T583_GPIO0, + RC5T583_GPIO1, + RC5T583_GPIO2, + RC5T583_GPIO3, + RC5T583_GPIO4, + RC5T583_GPIO5, + RC5T583_GPIO6, + RC5T583_GPIO7, + + /* Should be last entry */ + RC5T583_MAX_GPIO, +}; + +enum { + RC5T583_DS_NONE, + RC5T583_DS_DC0, + RC5T583_DS_DC1, + RC5T583_DS_DC2, + RC5T583_DS_DC3, + RC5T583_DS_LDO0, + RC5T583_DS_LDO1, + RC5T583_DS_LDO2, + RC5T583_DS_LDO3, + RC5T583_DS_LDO4, + RC5T583_DS_LDO5, + RC5T583_DS_LDO6, + RC5T583_DS_LDO7, + RC5T583_DS_LDO8, + RC5T583_DS_LDO9, + RC5T583_DS_PSO0, + RC5T583_DS_PSO1, + RC5T583_DS_PSO2, + RC5T583_DS_PSO3, + RC5T583_DS_PSO4, + RC5T583_DS_PSO5, + RC5T583_DS_PSO6, + RC5T583_DS_PSO7, + + /* Should be last entry */ + RC5T583_DS_MAX, +}; + +/* + * Ricoh pmic RC5T583 supports sleep through two external controls. + * The output of gpios and regulator can be enable/disable through + * this external signals. + */ +enum { + RC5T583_EXT_PWRREQ1_CONTROL = 0x1, + RC5T583_EXT_PWRREQ2_CONTROL = 0x2, +}; + +struct rc5t583 { + struct device *dev; + struct regmap *regmap; + int chip_irq; + int irq_base; + struct mutex irq_lock; + unsigned long group_irq_en[MAX_MAIN_INTERRUPT]; + + /* For main interrupt bits in INTC */ + uint8_t intc_inten_reg; + + /* For group interrupt bits and address */ + uint8_t irq_en_reg[RC5T583_MAX_INTERRUPT_MASK_REGS]; + + /* For gpio edge */ + uint8_t gpedge_reg[RC5T583_MAX_GPEDGE_REG]; +}; + +/* + * rc5t583_platform_data: Platform data for ricoh rc5t583 pmu. + * The board specific data is provided through this structure. + * @irq_base: Irq base number on which this device registers their interrupts. + * @enable_shutdown: Enable shutdown through the input pin "shutdown". + */ + +struct rc5t583_platform_data { + int irq_base; + bool enable_shutdown; +}; + +int rc5t583_write(struct device *dev, u8 reg, uint8_t val); +int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val); +int rc5t583_set_bits(struct device *dev, unsigned int reg, + unsigned int bit_mask); +int rc5t583_clear_bits(struct device *dev, unsigned int reg, + unsigned int bit_mask); +int rc5t583_update(struct device *dev, unsigned int reg, + unsigned int val, unsigned int mask); +int rc5t583_ext_power_req_config(struct device *dev, int deepsleep_id, + int ext_pwr_req, int deepsleep_slot_nr); +int rc5t583_irq_init(struct rc5t583 *rc5t583, int irq, int irq_base); +int rc5t583_irq_exit(struct rc5t583 *rc5t583); + +#endif |