summaryrefslogtreecommitdiffstats
path: root/include/linux/mfd
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/mfd')
-rw-r--r--include/linux/mfd/da903x.h44
-rw-r--r--include/linux/mfd/wm8350/audio.h38
-rw-r--r--include/linux/mfd/wm8350/comparator.h8
-rw-r--r--include/linux/mfd/wm8350/core.h52
-rw-r--r--include/linux/mfd/wm8350/pmic.h4
-rw-r--r--include/linux/mfd/wm8350/supply.h25
6 files changed, 162 insertions, 9 deletions
diff --git a/include/linux/mfd/da903x.h b/include/linux/mfd/da903x.h
index cad314c1243..115dbe96508 100644
--- a/include/linux/mfd/da903x.h
+++ b/include/linux/mfd/da903x.h
@@ -32,6 +32,7 @@ enum {
DA9030_ID_LDO18,
DA9030_ID_LDO19,
DA9030_ID_LDO_INT, /* LDO Internal */
+ DA9030_ID_BAT, /* battery charger */
DA9034_ID_LED_1,
DA9034_ID_LED_2,
@@ -93,6 +94,43 @@ struct da9034_touch_pdata {
int y_inverted;
};
+/* DA9030 battery charger data */
+struct power_supply_info;
+
+struct da9030_battery_info {
+ /* battery parameters */
+ struct power_supply_info *battery_info;
+
+ /* current and voltage to use for battery charging */
+ unsigned int charge_milliamp;
+ unsigned int charge_millivolt;
+
+ /* voltage thresholds (in millivolts) */
+ int vbat_low;
+ int vbat_crit;
+ int vbat_charge_start;
+ int vbat_charge_stop;
+ int vbat_charge_restart;
+
+ /* battery nominal minimal and maximal voltages in millivolts */
+ int vcharge_min;
+ int vcharge_max;
+
+ /* Temperature thresholds. These are DA9030 register values
+ "as is" and should be measured for each battery type */
+ int tbat_low;
+ int tbat_high;
+ int tbat_restart;
+
+
+ /* battery monitor interval (seconds) */
+ unsigned int batmon_interval;
+
+ /* platform callbacks for battery low and critical events */
+ void (*battery_low)(void);
+ void (*battery_critical)(void);
+};
+
struct da903x_subdev_info {
int id;
const char *name;
@@ -190,11 +228,13 @@ extern int da903x_unregister_notifier(struct device *dev,
extern int da903x_query_status(struct device *dev, unsigned int status);
-/* NOTE: the two functions below are not intended for use outside
- * of the DA9034 sub-device drivers
+/* NOTE: the functions below are not intended for use outside
+ * of the DA903x sub-device drivers
*/
extern int da903x_write(struct device *dev, int reg, uint8_t val);
+extern int da903x_writes(struct device *dev, int reg, int len, uint8_t *val);
extern int da903x_read(struct device *dev, int reg, uint8_t *val);
+extern int da903x_reads(struct device *dev, int reg, int len, uint8_t *val);
extern int da903x_update(struct device *dev, int reg, uint8_t val, uint8_t mask);
extern int da903x_set_bits(struct device *dev, int reg, uint8_t bit_mask);
extern int da903x_clr_bits(struct device *dev, int reg, uint8_t bit_mask);
diff --git a/include/linux/mfd/wm8350/audio.h b/include/linux/mfd/wm8350/audio.h
index 217bb22ebb8..af95a1d2f3a 100644
--- a/include/linux/mfd/wm8350/audio.h
+++ b/include/linux/mfd/wm8350/audio.h
@@ -1,7 +1,7 @@
/*
* audio.h -- Audio Driver for Wolfson WM8350 PMIC
*
- * Copyright 2007 Wolfson Microelectronics PLC
+ * Copyright 2007, 2008 Wolfson Microelectronics PLC
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -70,9 +70,9 @@
#define WM8350_CODEC_ISEL_0_5 3 /* x0.5 */
#define WM8350_VMID_OFF 0
-#define WM8350_VMID_500K 1
-#define WM8350_VMID_100K 2
-#define WM8350_VMID_10K 3
+#define WM8350_VMID_300K 1
+#define WM8350_VMID_50K 2
+#define WM8350_VMID_5K 3
/*
* R40 (0x28) - Clock Control 1
@@ -591,8 +591,38 @@
#define WM8350_IRQ_CODEC_MICSCD 41
#define WM8350_IRQ_CODEC_MICD 42
+/*
+ * WM8350 Platform data.
+ *
+ * This must be initialised per platform for best audio performance.
+ * Please see WM8350 datasheet for information.
+ */
+struct wm8350_audio_platform_data {
+ int vmid_discharge_msecs; /* VMID --> OFF discharge time */
+ int drain_msecs; /* OFF drain time */
+ int cap_discharge_msecs; /* Cap ON (from OFF) discharge time */
+ int vmid_charge_msecs; /* vmid power up time */
+ u32 vmid_s_curve:2; /* vmid enable s curve speed */
+ u32 dis_out4:2; /* out4 discharge speed */
+ u32 dis_out3:2; /* out3 discharge speed */
+ u32 dis_out2:2; /* out2 discharge speed */
+ u32 dis_out1:2; /* out1 discharge speed */
+ u32 vroi_out4:1; /* out4 tie off */
+ u32 vroi_out3:1; /* out3 tie off */
+ u32 vroi_out2:1; /* out2 tie off */
+ u32 vroi_out1:1; /* out1 tie off */
+ u32 vroi_enable:1; /* enable tie off */
+ u32 codec_current_on:2; /* current level ON */
+ u32 codec_current_standby:2; /* current level STANDBY */
+ u32 codec_current_charge:2; /* codec current @ vmid charge */
+};
+
+struct snd_soc_codec;
+
struct wm8350_codec {
struct platform_device *pdev;
+ struct snd_soc_codec *codec;
+ struct wm8350_audio_platform_data *platform_data;
};
#endif
diff --git a/include/linux/mfd/wm8350/comparator.h b/include/linux/mfd/wm8350/comparator.h
index 05378864945..54bc5d0fd50 100644
--- a/include/linux/mfd/wm8350/comparator.h
+++ b/include/linux/mfd/wm8350/comparator.h
@@ -164,4 +164,12 @@
#define WM8350_AUXADC_BATT 6
#define WM8350_AUXADC_TEMP 7
+struct wm8350;
+
+/*
+ * AUX ADC Readback
+ */
+int wm8350_read_auxadc(struct wm8350 *wm8350, int channel, int scale,
+ int vref);
+
#endif
diff --git a/include/linux/mfd/wm8350/core.h b/include/linux/mfd/wm8350/core.h
index 6ebf97f2a47..980669d50dc 100644
--- a/include/linux/mfd/wm8350/core.h
+++ b/include/linux/mfd/wm8350/core.h
@@ -29,6 +29,7 @@
*/
#define WM8350_RESET_ID 0x00
#define WM8350_ID 0x01
+#define WM8350_REVISION 0x02
#define WM8350_SYSTEM_CONTROL_1 0x03
#define WM8350_SYSTEM_CONTROL_2 0x04
#define WM8350_SYSTEM_HIBERNATE 0x05
@@ -57,6 +58,10 @@
#define WM8350_OVER_CURRENT_INT_STATUS_MASK 0x25
#define WM8350_GPIO_INT_STATUS_MASK 0x26
#define WM8350_COMPARATOR_INT_STATUS_MASK 0x27
+#define WM8350_CHARGER_OVERRIDES 0xE2
+#define WM8350_MISC_OVERRIDES 0xE3
+#define WM8350_COMPARATOR_OVERRIDES 0xE7
+#define WM8350_STATE_MACHINE_STATUS 0xE9
#define WM8350_MAX_REGISTER 0xFF
@@ -77,6 +82,11 @@
#define WM8350_CUST_ID_MASK 0x00FF
/*
+ * R2 (0x02) - Revision
+ */
+#define WM8350_MASK_REV_MASK 0x00FF
+
+/*
* R3 (0x03) - System Control 1
*/
#define WM8350_CHIP_ON 0x8000
@@ -523,6 +533,35 @@
#define WM8350_DC2_STS 0x0002
#define WM8350_DC1_STS 0x0001
+/*
+ * R226 (0xE2) - Charger status
+ */
+#define WM8350_CHG_BATT_HOT_OVRDE 0x8000
+#define WM8350_CHG_BATT_COLD_OVRDE 0x4000
+
+/*
+ * R227 (0xE3) - Misc Overrides
+ */
+#define WM8350_USB_LIMIT_OVRDE 0x0400
+
+/*
+ * R227 (0xE7) - Comparator Overrides
+ */
+#define WM8350_USB_FB_OVRDE 0x8000
+#define WM8350_WALL_FB_OVRDE 0x4000
+#define WM8350_BATT_FB_OVRDE 0x2000
+
+
+/*
+ * R233 (0xE9) - State Machinine Status
+ */
+#define WM8350_USB_SM_MASK 0x0700
+#define WM8350_USB_SM_SHIFT 8
+
+#define WM8350_USB_SM_100_SLV 1
+#define WM8350_USB_SM_500_SLV 5
+#define WM8350_USB_SM_STDBY_SLV 7
+
/* WM8350 wake up conditions */
#define WM8350_IRQ_WKUP_OFF_STATE 43
#define WM8350_IRQ_WKUP_HIB_STATE 44
@@ -536,6 +575,7 @@
#define WM8350_REV_E 0x4
#define WM8350_REV_F 0x5
#define WM8350_REV_G 0x6
+#define WM8350_REV_H 0x7
#define WM8350_NUM_IRQ 63
@@ -549,6 +589,14 @@ extern const u16 wm8350_mode0_defaults[];
extern const u16 wm8350_mode1_defaults[];
extern const u16 wm8350_mode2_defaults[];
extern const u16 wm8350_mode3_defaults[];
+extern const u16 wm8351_mode0_defaults[];
+extern const u16 wm8351_mode1_defaults[];
+extern const u16 wm8351_mode2_defaults[];
+extern const u16 wm8351_mode3_defaults[];
+extern const u16 wm8352_mode0_defaults[];
+extern const u16 wm8352_mode1_defaults[];
+extern const u16 wm8352_mode2_defaults[];
+extern const u16 wm8352_mode3_defaults[];
struct wm8350;
@@ -558,8 +606,6 @@ struct wm8350_irq {
};
struct wm8350 {
- int rev; /* chip revision */
-
struct device *dev;
/* device IO */
@@ -572,6 +618,8 @@ struct wm8350 {
void *src);
u16 *reg_cache;
+ struct mutex auxadc_mutex;
+
/* Interrupt handling */
struct work_struct irq_work;
struct mutex irq_mutex; /* IRQ table mutex */
diff --git a/include/linux/mfd/wm8350/pmic.h b/include/linux/mfd/wm8350/pmic.h
index 69b69e07f62..96acbfc8aa1 100644
--- a/include/linux/mfd/wm8350/pmic.h
+++ b/include/linux/mfd/wm8350/pmic.h
@@ -701,6 +701,10 @@ struct platform_device;
struct regulator_init_data;
struct wm8350_pmic {
+ /* Number of regulators of each type on this device */
+ int max_dcdc;
+ int max_isink;
+
/* ISINK to DCDC mapping */
int isink_A_dcdc;
int isink_B_dcdc;
diff --git a/include/linux/mfd/wm8350/supply.h b/include/linux/mfd/wm8350/supply.h
index 1c8f3cde79b..2b9479310bb 100644
--- a/include/linux/mfd/wm8350/supply.h
+++ b/include/linux/mfd/wm8350/supply.h
@@ -13,7 +13,8 @@
#ifndef __LINUX_MFD_WM8350_SUPPLY_H_
#define __LINUX_MFD_WM8350_SUPPLY_H_
-#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/power_supply.h>
/*
* Charger registers
@@ -104,8 +105,30 @@
#define WM8350_IRQ_EXT_WALL_FB 37
#define WM8350_IRQ_EXT_BAT_FB 38
+/*
+ * Policy to control charger state machine.
+ */
+struct wm8350_charger_policy {
+
+ /* charger state machine policy - set in machine driver */
+ int eoc_mA; /* end of charge current (mA) */
+ int charge_mV; /* charge voltage */
+ int fast_limit_mA; /* fast charge current limit */
+ int fast_limit_USB_mA; /* USB fast charge current limit */
+ int charge_timeout; /* charge timeout (mins) */
+ int trickle_start_mV; /* trickle charge starts at mV */
+ int trickle_charge_mA; /* trickle charge current */
+ int trickle_charge_USB_mA; /* USB trickle charge current */
+};
+
struct wm8350_power {
struct platform_device *pdev;
+ struct power_supply battery;
+ struct power_supply usb;
+ struct power_supply ac;
+ struct wm8350_charger_policy *policy;
+
+ int rev_g_coeff;
};
#endif
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-04 12:33:02 +0000