summaryrefslogtreecommitdiffstats
path: root/include/linux/mfd
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/mfd')
-rw-r--r--include/linux/mfd/abx500.h27
-rw-r--r--include/linux/mfd/abx500/ab8500-bm.h61
-rw-r--r--include/linux/mfd/abx500/ab8500-gpadc.h74
-rw-r--r--include/linux/mfd/abx500/ab8500-sysctrl.h6
-rw-r--r--include/linux/mfd/abx500/ab8500.h14
-rw-r--r--include/linux/mfd/abx500/ux500_chargalg.h7
-rw-r--r--include/linux/mfd/arizona/core.h3
-rw-r--r--include/linux/mfd/arizona/pdata.h21
-rw-r--r--include/linux/mfd/arizona/registers.h4
-rw-r--r--include/linux/mfd/max77693-private.h23
-rw-r--r--include/linux/mfd/palmas.h24
-rw-r--r--include/linux/mfd/tps65090.h5
-rw-r--r--include/linux/mfd/tps65217.h1
13 files changed, 222 insertions, 48 deletions
diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h
index 9ead60bc66b..3301b2031c8 100644
--- a/include/linux/mfd/abx500.h
+++ b/include/linux/mfd/abx500.h
@@ -89,6 +89,11 @@ struct abx500_fg;
* points.
* @maint_thres This is the threshold where we stop reporting
* battery full while in maintenance, in per cent
+ * @pcut_enable: Enable power cut feature in ab8505
+ * @pcut_max_time: Max time threshold
+ * @pcut_flag_time: Flagtime threshold
+ * @pcut_max_restart: Max number of restarts
+ * @pcut_debounce_time: Sets battery debounce time
*/
struct abx500_fg_parameters {
int recovery_sleep_timer;
@@ -106,6 +111,11 @@ struct abx500_fg_parameters {
int battok_raising_th_sel1;
int user_cap_limit;
int maint_thres;
+ bool pcut_enable;
+ u8 pcut_max_time;
+ u8 pcut_flag_time;
+ u8 pcut_max_restart;
+ u8 pcut_debounce_time;
};
/**
@@ -173,11 +183,11 @@ struct abx500_battery_type {
int low_high_vol_lvl;
int battery_resistance;
int n_temp_tbl_elements;
- struct abx500_res_to_temp *r_to_t_tbl;
+ const struct abx500_res_to_temp *r_to_t_tbl;
int n_v_cap_tbl_elements;
- struct abx500_v_to_cap *v_to_cap_tbl;
+ const struct abx500_v_to_cap *v_to_cap_tbl;
int n_batres_tbl_elements;
- struct batres_vs_temp *batres_tbl;
+ const struct batres_vs_temp *batres_tbl;
};
/**
@@ -236,7 +246,11 @@ struct abx500_bm_charger_parameters {
* @interval_not_charging charge alg cycle period time when not charging (sec)
* @temp_hysteresis temperature hysteresis
* @gnd_lift_resistance Battery ground to phone ground resistance (mOhm)
- * @maxi: maximization parameters
+ * @n_chg_out_curr number of elements in array chg_output_curr
+ * @n_chg_in_curr number of elements in array chg_input_curr
+ * @chg_output_curr charger output current level map
+ * @chg_input_curr charger input current level map
+ * @maxi maximization parameters
* @cap_levels capacity in percent for the different capacity levels
* @bat_type table of supported battery types
* @chg_params charger parameters
@@ -257,6 +271,7 @@ struct abx500_bm_data {
bool autopower_cfg;
bool ac_enabled;
bool usb_enabled;
+ bool usb_power_path;
bool no_maintenance;
bool capacity_scaling;
bool chg_unknown_bat;
@@ -270,6 +285,10 @@ struct abx500_bm_data {
int interval_not_charging;
int temp_hysteresis;
int gnd_lift_resistance;
+ int n_chg_out_curr;
+ int n_chg_in_curr;
+ int *chg_output_curr;
+ int *chg_input_curr;
const struct abx500_maxim_parameters *maxi;
const struct abx500_bm_capacity_levels *cap_levels;
struct abx500_battery_type *bat_type;
diff --git a/include/linux/mfd/abx500/ab8500-bm.h b/include/linux/mfd/abx500/ab8500-bm.h
index 8d35bfe164c..cc892a8d8d6 100644
--- a/include/linux/mfd/abx500/ab8500-bm.h
+++ b/include/linux/mfd/abx500/ab8500-bm.h
@@ -23,6 +23,7 @@
* Bank : 0x5
*/
#define AB8500_USB_LINE_STAT_REG 0x80
+#define AB8500_USB_LINE_CTRL2_REG 0x82
#define AB8500_USB_LINK1_STAT_REG 0x94
/*
@@ -33,7 +34,7 @@
#define AB8500_CH_STATUS2_REG 0x01
#define AB8500_CH_USBCH_STAT1_REG 0x02
#define AB8500_CH_USBCH_STAT2_REG 0x03
-#define AB8500_CH_FSM_STAT_REG 0x04
+#define AB8540_CH_USBCH_STAT3_REG 0x04
#define AB8500_CH_STAT_REG 0x05
/*
@@ -69,6 +70,8 @@
#define AB8500_USBCH_CTRL1_REG 0xC0
#define AB8500_USBCH_CTRL2_REG 0xC1
#define AB8500_USBCH_IPT_CRNTLVL_REG 0xC2
+#define AB8540_USB_PP_MODE_REG 0xC5
+#define AB8540_USB_PP_CHR_REG 0xC6
/*
* Gas Gauge register offsets
@@ -105,6 +108,7 @@
#define AB8500_RTC_BACKUP_CHG_REG 0x0C
#define AB8500_RTC_CC_CONF_REG 0x01
#define AB8500_RTC_CTRL_REG 0x0B
+#define AB8500_RTC_CTRL1_REG 0x11
/*
* OTP register offsets
@@ -154,6 +158,7 @@
#define CH_OP_CUR_LVL_1P4 0x0D
#define CH_OP_CUR_LVL_1P5 0x0E
#define CH_OP_CUR_LVL_1P6 0x0F
+#define CH_OP_CUR_LVL_2P 0x3F
/* BTEMP High thermal limits */
#define BTEMP_HIGH_TH_57_0 0x00
@@ -179,10 +184,25 @@
#define BUP_ICH_SEL_300UA 0x08
#define BUP_ICH_SEL_700UA 0x0C
-#define BUP_VCH_SEL_2P5V 0x00
-#define BUP_VCH_SEL_2P6V 0x01
-#define BUP_VCH_SEL_2P8V 0x02
-#define BUP_VCH_SEL_3P1V 0x03
+enum bup_vch_sel {
+ BUP_VCH_SEL_2P5V,
+ BUP_VCH_SEL_2P6V,
+ BUP_VCH_SEL_2P8V,
+ BUP_VCH_SEL_3P1V,
+ /*
+ * Note that the following 5 values 2.7v, 2.9v, 3.0v, 3.2v, 3.3v
+ * are only available on ab8540. You can't choose these 5
+ * voltage on ab8500/ab8505/ab9540.
+ */
+ BUP_VCH_SEL_2P7V,
+ BUP_VCH_SEL_2P9V,
+ BUP_VCH_SEL_3P0V,
+ BUP_VCH_SEL_3P2V,
+ BUP_VCH_SEL_3P3V,
+};
+
+#define BUP_VCH_RANGE 0x02
+#define VBUP33_VRTCN 0x01
/* Battery OVV constants */
#define BATT_OVV_ENA 0x02
@@ -228,6 +248,8 @@
#define BAT_CTRL_20U_ENA 0x02
#define BAT_CTRL_18U_ENA 0x01
#define BAT_CTRL_16U_ENA 0x02
+#define BAT_CTRL_60U_ENA 0x01
+#define BAT_CTRL_120U_ENA 0x02
#define BAT_CTRL_CMP_ENA 0x04
#define FORCE_BAT_CTRL_CMP_HIGH 0x08
#define BAT_CTRL_PULL_UP_ENA 0x10
@@ -235,6 +257,24 @@
/* Battery type */
#define BATTERY_UNKNOWN 00
+/* Registers for pcut feature in ab8505 and ab9540 */
+#define AB8505_RTC_PCUT_CTL_STATUS_REG 0x12
+#define AB8505_RTC_PCUT_TIME_REG 0x13
+#define AB8505_RTC_PCUT_MAX_TIME_REG 0x14
+#define AB8505_RTC_PCUT_FLAG_TIME_REG 0x15
+#define AB8505_RTC_PCUT_RESTART_REG 0x16
+#define AB8505_RTC_PCUT_DEBOUNCE_REG 0x17
+
+/* USB Power Path constants for ab8540 */
+#define BUS_VSYS_VOL_SELECT_MASK 0x06
+#define BUS_VSYS_VOL_SELECT_3P6V 0x00
+#define BUS_VSYS_VOL_SELECT_3P325V 0x02
+#define BUS_VSYS_VOL_SELECT_3P9V 0x04
+#define BUS_VSYS_VOL_SELECT_4P3V 0x06
+#define BUS_POWER_PATH_MODE_ENA 0x01
+#define BUS_PP_PRECHG_CURRENT_MASK 0x0E
+#define BUS_POWER_PATH_PRECHG_ENA 0x01
+
/**
* struct res_to_temp - defines one point in a temp to res curve. To
* be used in battery packs that combines the identification resistor with a
@@ -283,6 +323,11 @@ struct ab8500_fg;
* points.
* @maint_thres This is the threshold where we stop reporting
* battery full while in maintenance, in per cent
+ * @pcut_enable: Enable power cut feature in ab8505
+ * @pcut_max_time: Max time threshold
+ * @pcut_flag_time: Flagtime threshold
+ * @pcut_max_restart: Max number of restarts
+ * @pcut_debunce_time: Sets battery debounce time
*/
struct ab8500_fg_parameters {
int recovery_sleep_timer;
@@ -299,6 +344,11 @@ struct ab8500_fg_parameters {
int battok_raising_th_sel1;
int user_cap_limit;
int maint_thres;
+ bool pcut_enable;
+ u8 pcut_max_time;
+ u8 pcut_flag_time;
+ u8 pcut_max_restart;
+ u8 pcut_debunce_time;
};
/**
@@ -415,6 +465,7 @@ void ab8500_fg_reinit(void);
void ab8500_charger_usb_state_changed(u8 bm_usb_state, u16 mA);
struct ab8500_btemp *ab8500_btemp_get(void);
int ab8500_btemp_get_batctrl_temp(struct ab8500_btemp *btemp);
+int ab8500_btemp_get_temp(struct ab8500_btemp *btemp);
struct ab8500_fg *ab8500_fg_get(void);
int ab8500_fg_inst_curr_blocking(struct ab8500_fg *dev);
int ab8500_fg_inst_curr_start(struct ab8500_fg *di);
diff --git a/include/linux/mfd/abx500/ab8500-gpadc.h b/include/linux/mfd/abx500/ab8500-gpadc.h
index 252966769d9..49ded001049 100644
--- a/include/linux/mfd/abx500/ab8500-gpadc.h
+++ b/include/linux/mfd/abx500/ab8500-gpadc.h
@@ -4,32 +4,72 @@
*
* Author: Arun R Murthy <arun.murthy@stericsson.com>
* Author: Daniel Willerud <daniel.willerud@stericsson.com>
+ * Author: M'boumba Cedric Madianga <cedric.madianga@stericsson.com>
*/
#ifndef _AB8500_GPADC_H
#define _AB8500_GPADC_H
-/* GPADC source: From datasheet(ADCSwSel[4:0] in GPADCCtrl2) */
-#define BAT_CTRL 0x01
-#define BTEMP_BALL 0x02
-#define MAIN_CHARGER_V 0x03
-#define ACC_DETECT1 0x04
-#define ACC_DETECT2 0x05
-#define ADC_AUX1 0x06
-#define ADC_AUX2 0x07
-#define MAIN_BAT_V 0x08
-#define VBUS_V 0x09
-#define MAIN_CHARGER_C 0x0A
-#define USB_CHARGER_C 0x0B
-#define BK_BAT_V 0x0C
-#define DIE_TEMP 0x0D
+/* GPADC source: From datasheet(ADCSwSel[4:0] in GPADCCtrl2
+ * and ADCHwSel[4:0] in GPADCCtrl3 ) */
+#define BAT_CTRL 0x01
+#define BTEMP_BALL 0x02
+#define MAIN_CHARGER_V 0x03
+#define ACC_DETECT1 0x04
+#define ACC_DETECT2 0x05
+#define ADC_AUX1 0x06
+#define ADC_AUX2 0x07
+#define MAIN_BAT_V 0x08
+#define VBUS_V 0x09
+#define MAIN_CHARGER_C 0x0A
+#define USB_CHARGER_C 0x0B
+#define BK_BAT_V 0x0C
+#define DIE_TEMP 0x0D
+#define USB_ID 0x0E
+#define XTAL_TEMP 0x12
+#define VBAT_TRUE_MEAS 0x13
+#define BAT_CTRL_AND_IBAT 0x1C
+#define VBAT_MEAS_AND_IBAT 0x1D
+#define VBAT_TRUE_MEAS_AND_IBAT 0x1E
+#define BAT_TEMP_AND_IBAT 0x1F
+
+/* Virtual channel used only for ibat convertion to ampere
+ * Battery current conversion (ibat) cannot be requested as a single conversion
+ * but it is always in combination with other input requests
+ */
+#define IBAT_VIRTUAL_CHANNEL 0xFF
+
+#define SAMPLE_1 1
+#define SAMPLE_4 4
+#define SAMPLE_8 8
+#define SAMPLE_16 16
+#define RISING_EDGE 0
+#define FALLING_EDGE 1
+
+/* Arbitrary ADC conversion type constants */
+#define ADC_SW 0
+#define ADC_HW 1
struct ab8500_gpadc;
struct ab8500_gpadc *ab8500_gpadc_get(char *name);
-int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel);
-int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel);
+int ab8500_gpadc_sw_hw_convert(struct ab8500_gpadc *gpadc, u8 channel,
+ u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type);
+static inline int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel)
+{
+ return ab8500_gpadc_sw_hw_convert(gpadc, channel,
+ SAMPLE_16, 0, 0, ADC_SW);
+}
+
+int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
+ u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type);
+int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
+ u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type,
+ int *ibat);
int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc,
- u8 channel, int ad_value);
+ u8 channel, int ad_value);
+void ab8540_gpadc_get_otp(struct ab8500_gpadc *gpadc,
+ u16 *vmain_l, u16 *vmain_h, u16 *btemp_l, u16 *btemp_h,
+ u16 *vbat_l, u16 *vbat_h, u16 *ibat_l, u16 *ibat_h);
#endif /* _AB8500_GPADC_H */
diff --git a/include/linux/mfd/abx500/ab8500-sysctrl.h b/include/linux/mfd/abx500/ab8500-sysctrl.h
index ebf12e793db..990bc93f46e 100644
--- a/include/linux/mfd/abx500/ab8500-sysctrl.h
+++ b/include/linux/mfd/abx500/ab8500-sysctrl.h
@@ -12,6 +12,7 @@
int ab8500_sysctrl_read(u16 reg, u8 *value);
int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value);
+void ab8500_restart(char mode, const char *cmd);
#else
@@ -40,6 +41,7 @@ static inline int ab8500_sysctrl_clear(u16 reg, u8 bits)
/* Configuration data for SysClkReq1RfClkBuf - SysClkReq8RfClkBuf */
struct ab8500_sysctrl_platform_data {
u8 initial_req_buf_config[8];
+ u16 (*reboot_reason_code)(const char *cmd);
};
/* Registers */
@@ -299,4 +301,8 @@ struct ab8500_sysctrl_platform_data {
#define AB9540_SYSCLK12BUF4VALID_SYSCLK12BUF4VALID_MASK 0xFF
#define AB9540_SYSCLK12BUF4VALID_SYSCLK12BUF4VALID_SHIFT 0
+#define AB8500_ENABLE_WD 0x1
+#define AB8500_KICK_WD 0x2
+#define AB8500_WD_RESTART_ON_EXPIRE 0x10
+
#endif /* __AB8500_SYSCTRL_H */
diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h
index 9db0bda446a..fb1bf7d6a41 100644
--- a/include/linux/mfd/abx500/ab8500.h
+++ b/include/linux/mfd/abx500/ab8500.h
@@ -362,10 +362,10 @@ struct ab8500 {
u8 *oldmask;
int mask_size;
const int *irq_reg_offset;
+ int it_latchhier_num;
};
-struct regulator_reg_init;
-struct regulator_init_data;
+struct ab8500_regulator_platform_data;
struct ab8500_gpio_platform_data;
struct ab8500_codec_platform_data;
struct ab8500_sysctrl_platform_data;
@@ -375,19 +375,13 @@ struct ab8500_sysctrl_platform_data;
* @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used
* @pm_power_off: Should machine pm power off hook be registered or not
* @init: board-specific initialization after detection of ab8500
- * @num_regulator_reg_init: number of regulator init registers
- * @regulator_reg_init: regulator init registers
- * @num_regulator: number of regulators
* @regulator: machine-specific constraints for regulators
*/
struct ab8500_platform_data {
int irq_base;
bool pm_power_off;
void (*init) (struct ab8500 *);
- int num_regulator_reg_init;
- struct ab8500_regulator_reg_init *regulator_reg_init;
- int num_regulator;
- struct regulator_init_data *regulator;
+ struct ab8500_regulator_platform_data *regulator;
struct abx500_gpio_platform_data *gpio;
struct ab8500_codec_platform_data *codec;
struct ab8500_sysctrl_platform_data *sysctrl;
@@ -512,6 +506,8 @@ static inline int is_ab9540_2p0_or_earlier(struct ab8500 *ab)
return (is_ab9540(ab) && (ab->chip_id < AB8500_CUT2P0));
}
+void ab8500_override_turn_on_stat(u8 mask, u8 set);
+
#ifdef CONFIG_AB8500_DEBUG
void ab8500_dump_all_banks(struct device *dev);
void ab8500_debug_register_interrupt(int line);
diff --git a/include/linux/mfd/abx500/ux500_chargalg.h b/include/linux/mfd/abx500/ux500_chargalg.h
index d43ac0f3552..234c99143bf 100644
--- a/include/linux/mfd/abx500/ux500_chargalg.h
+++ b/include/linux/mfd/abx500/ux500_chargalg.h
@@ -17,8 +17,11 @@ struct ux500_charger;
struct ux500_charger_ops {
int (*enable) (struct ux500_charger *, int, int, int);
+ int (*check_enable) (struct ux500_charger *, int, int);
int (*kick_wd) (struct ux500_charger *);
int (*update_curr) (struct ux500_charger *, int);
+ int (*pp_enable) (struct ux500_charger *, bool);
+ int (*pre_chg_enable) (struct ux500_charger *, bool);
};
/**
@@ -29,6 +32,7 @@ struct ux500_charger_ops {
* @max_out_curr maximum output charger current in mA
* @enabled indicates if this charger is used or not
* @external external charger unit (pm2xxx)
+ * @power_path USB power path support
*/
struct ux500_charger {
struct power_supply psy;
@@ -38,6 +42,9 @@ struct ux500_charger {
int wdt_refresh;
bool enabled;
bool external;
+ bool power_path;
};
+extern struct blocking_notifier_head charger_notifier_list;
+
#endif
diff --git a/include/linux/mfd/arizona/core.h b/include/linux/mfd/arizona/core.h
index a710255528d..cc281368dc5 100644
--- a/include/linux/mfd/arizona/core.h
+++ b/include/linux/mfd/arizona/core.h
@@ -100,6 +100,9 @@ struct arizona {
struct regmap_irq_chip_data *aod_irq_chip;
struct regmap_irq_chip_data *irq_chip;
+ bool hpdet_magic;
+ unsigned int hp_ena;
+
struct mutex clk_lock;
int clk32k_ref;
diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h
index 455c51d22d6..a0f940987a3 100644
--- a/include/linux/mfd/arizona/pdata.h
+++ b/include/linux/mfd/arizona/pdata.h
@@ -86,6 +86,11 @@ struct arizona_micd_config {
bool gpio;
};
+struct arizona_micd_range {
+ int max; /** Ohms */
+ int key; /** Key to report to input layer */
+};
+
struct arizona_pdata {
int reset; /** GPIO controlling /RESET, if any */
int ldoena; /** GPIO controlling LODENA, if any */
@@ -117,12 +122,21 @@ struct arizona_pdata {
/** GPIO5 is used for jack detection */
bool jd_gpio5;
+ /** Internal pull on GPIO5 is disabled when used for jack detection */
+ bool jd_gpio5_nopull;
+
/** Use the headphone detect circuit to identify the accessory */
bool hpdet_acc_id;
+ /** Check for line output with HPDET method */
+ bool hpdet_acc_id_line;
+
/** GPIO used for mic isolation with HPDET */
int hpdet_id_gpio;
+ /** Extra debounce timeout used during initial mic detection (ms) */
+ int micd_detect_debounce;
+
/** GPIO for mic detection polarity */
int micd_pol_gpio;
@@ -135,9 +149,16 @@ struct arizona_pdata {
/** Mic detect debounce level */
int micd_dbtime;
+ /** Mic detect timeout (ms) */
+ int micd_timeout;
+
/** Force MICBIAS on for mic detect */
bool micd_force_micbias;
+ /** Mic detect level parameters */
+ const struct arizona_micd_range *micd_ranges;
+ int num_micd_ranges;
+
/** Headset polarity configurations */
struct arizona_micd_config *micd_configs;
int num_micd_configs;
diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h
index 34035513606..f43aa7c8d04 100644
--- a/include/linux/mfd/arizona/registers.h
+++ b/include/linux/mfd/arizona/registers.h
@@ -124,6 +124,10 @@
#define ARIZONA_MIC_DETECT_1 0x2A3
#define ARIZONA_MIC_DETECT_2 0x2A4
#define ARIZONA_MIC_DETECT_3 0x2A5
+#define ARIZONA_MIC_DETECT_LEVEL_1 0x2A6
+#define ARIZONA_MIC_DETECT_LEVEL_2 0x2A7
+#define ARIZONA_MIC_DETECT_LEVEL_3 0x2A8
+#define ARIZONA_MIC_DETECT_LEVEL_4 0x2A9
#define ARIZONA_MIC_NOISE_MIX_CONTROL_1 0x2C3
#define ARIZONA_ISOLATION_CONTROL 0x2CB
#define ARIZONA_JACK_DETECT_ANALOGUE 0x2D3
diff --git a/include/linux/mfd/max77693-private.h b/include/linux/mfd/max77693-private.h
index 5b18ecde69b..1aa4f13cdfa 100644
--- a/include/linux/mfd/max77693-private.h
+++ b/include/linux/mfd/max77693-private.h
@@ -106,6 +106,29 @@ enum max77693_muic_reg {
MAX77693_MUIC_REG_END,
};
+/* MAX77693 INTMASK1~2 Register */
+#define INTMASK1_ADC1K_SHIFT 3
+#define INTMASK1_ADCERR_SHIFT 2
+#define INTMASK1_ADCLOW_SHIFT 1
+#define INTMASK1_ADC_SHIFT 0
+#define INTMASK1_ADC1K_MASK (1 << INTMASK1_ADC1K_SHIFT)
+#define INTMASK1_ADCERR_MASK (1 << INTMASK1_ADCERR_SHIFT)
+#define INTMASK1_ADCLOW_MASK (1 << INTMASK1_ADCLOW_SHIFT)
+#define INTMASK1_ADC_MASK (1 << INTMASK1_ADC_SHIFT)
+
+#define INTMASK2_VIDRM_SHIFT 5
+#define INTMASK2_VBVOLT_SHIFT 4
+#define INTMASK2_DXOVP_SHIFT 3
+#define INTMASK2_DCDTMR_SHIFT 2
+#define INTMASK2_CHGDETRUN_SHIFT 1
+#define INTMASK2_CHGTYP_SHIFT 0
+#define INTMASK2_VIDRM_MASK (1 << INTMASK2_VIDRM_SHIFT)
+#define INTMASK2_VBVOLT_MASK (1 << INTMASK2_VBVOLT_SHIFT)
+#define INTMASK2_DXOVP_MASK (1 << INTMASK2_DXOVP_SHIFT)
+#define INTMASK2_DCDTMR_MASK (1 << INTMASK2_DCDTMR_SHIFT)
+#define INTMASK2_CHGDETRUN_MASK (1 << INTMASK2_CHGDETRUN_SHIFT)
+#define INTMASK2_CHGTYP_MASK (1 << INTMASK2_CHGTYP_SHIFT)
+
/* MAX77693 MUIC - STATUS1~3 Register */
#define STATUS1_ADC_SHIFT (0)
#define STATUS1_ADCLOW_SHIFT (5)
diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h
index 3bbda22721e..ecddc5173c7 100644
--- a/include/linux/mfd/palmas.h
+++ b/include/linux/mfd/palmas.h
@@ -109,19 +109,6 @@ struct palmas_reg_init {
*/
int mode_sleep;
- /* tstep is the timestep loaded to the TSTEP register
- *
- * For SMPS
- *
- * 0: Jump (no slope control)
- * 1: 10mV/us
- * 2: 5mV/us
- * 3: 2.5mV/us
- *
- * For LDO unused
- */
- int tstep;
-
/* voltage_sel is the bitfield loaded onto the SMPSX_VOLTAGE
* register. Set this is the default voltage set in OTP needs
* to be overridden.
@@ -154,6 +141,12 @@ enum palmas_regulators {
PALMAS_REG_LDO9,
PALMAS_REG_LDOLN,
PALMAS_REG_LDOUSB,
+ /* External regulators */
+ PALMAS_REG_REGEN1,
+ PALMAS_REG_REGEN2,
+ PALMAS_REG_REGEN3,
+ PALMAS_REG_SYSEN1,
+ PALMAS_REG_SYSEN2,
/* Total number of regulators */
PALMAS_NUM_REGS,
};
@@ -171,6 +164,9 @@ struct palmas_pmic_platform_data {
/* use LDO6 for vibrator control */
int ldo6_vibrator;
+
+ /* Enable tracking mode of LDO8 */
+ bool enable_ldo8_tracking;
};
struct palmas_usb_platform_data {
@@ -331,6 +327,8 @@ struct palmas_pmic {
int smps457;
int range[PALMAS_REG_SMPS10];
+ unsigned int ramp_delay[PALMAS_REG_SMPS10];
+ unsigned int current_reg_mode[PALMAS_REG_SMPS10];
};
struct palmas_resource {
diff --git a/include/linux/mfd/tps65090.h b/include/linux/mfd/tps65090.h
index 6694cf43e8b..998628a2b08 100644
--- a/include/linux/mfd/tps65090.h
+++ b/include/linux/mfd/tps65090.h
@@ -86,6 +86,11 @@ struct tps65090_regulator_plat_data {
struct tps65090_platform_data {
int irq_base;
+
+ char **supplied_to;
+ size_t num_supplicants;
+ int enable_low_current_chrg;
+
struct tps65090_regulator_plat_data *reg_pdata[TPS65090_REGULATOR_MAX];
};
diff --git a/include/linux/mfd/tps65217.h b/include/linux/mfd/tps65217.h
index 290762f9393..29eab2bd3df 100644
--- a/include/linux/mfd/tps65217.h
+++ b/include/linux/mfd/tps65217.h
@@ -228,6 +228,7 @@ enum tps65217_bl_fdim {
struct tps65217_bl_pdata {
enum tps65217_bl_isel isel;
enum tps65217_bl_fdim fdim;
+ int dft_brightness;
};
/**
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-04 12:21:01 +0000