diff options
Diffstat (limited to 'include/linux/mfd')
| -rw-r--r-- | include/linux/mfd/abx500/ab8500-sysctrl.h | 1 | ||||
| -rw-r--r-- | include/linux/mfd/arizona/registers.h | 50 | ||||
| -rw-r--r-- | include/linux/mfd/atmel-hlcdc.h | 85 | ||||
| -rw-r--r-- | include/linux/mfd/axp20x.h | 59 | ||||
| -rw-r--r-- | include/linux/mfd/core.h | 7 | ||||
| -rw-r--r-- | include/linux/mfd/dln2.h | 103 | ||||
| -rw-r--r-- | include/linux/mfd/max77686.h | 7 | ||||
| -rw-r--r-- | include/linux/mfd/max77693-private.h | 8 | ||||
| -rw-r--r-- | include/linux/mfd/rtsx_pci.h | 37 | ||||
| -rw-r--r-- | include/linux/mfd/samsung/core.h | 2 | ||||
| -rw-r--r-- | include/linux/mfd/samsung/s2mps13.h | 186 | ||||
| -rw-r--r-- | include/linux/mfd/syscon/imx6q-iomuxc-gpr.h | 39 | ||||
| -rw-r--r-- | include/linux/mfd/tc3589x.h | 8 |
13 files changed, 575 insertions, 17 deletions
diff --git a/include/linux/mfd/abx500/ab8500-sysctrl.h b/include/linux/mfd/abx500/ab8500-sysctrl.h index adba89d9c66..689312745b2 100644 --- a/include/linux/mfd/abx500/ab8500-sysctrl.h +++ b/include/linux/mfd/abx500/ab8500-sysctrl.h @@ -12,7 +12,6 @@ int ab8500_sysctrl_read(u16 reg, u8 *value); int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value); -void ab8500_restart(char mode, const char *cmd); #else diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h index c0b075f6bc3..aacc10d7789 100644 --- a/include/linux/mfd/arizona/registers.h +++ b/include/linux/mfd/arizona/registers.h @@ -125,6 +125,8 @@ #define ARIZONA_MIC_BIAS_CTRL_1 0x218 #define ARIZONA_MIC_BIAS_CTRL_2 0x219 #define ARIZONA_MIC_BIAS_CTRL_3 0x21A +#define ARIZONA_HP_CTRL_1L 0x225 +#define ARIZONA_HP_CTRL_1R 0x226 #define ARIZONA_ACCESSORY_DETECT_MODE_1 0x293 #define ARIZONA_HEADPHONE_DETECT_1 0x29B #define ARIZONA_HEADPHONE_DETECT_2 0x29C @@ -279,8 +281,16 @@ #define ARIZONA_AIF2_FRAME_CTRL_2 0x548 #define ARIZONA_AIF2_FRAME_CTRL_3 0x549 #define ARIZONA_AIF2_FRAME_CTRL_4 0x54A +#define ARIZONA_AIF2_FRAME_CTRL_5 0x54B +#define ARIZONA_AIF2_FRAME_CTRL_6 0x54C +#define ARIZONA_AIF2_FRAME_CTRL_7 0x54D +#define ARIZONA_AIF2_FRAME_CTRL_8 0x54E #define ARIZONA_AIF2_FRAME_CTRL_11 0x551 #define ARIZONA_AIF2_FRAME_CTRL_12 0x552 +#define ARIZONA_AIF2_FRAME_CTRL_13 0x553 +#define ARIZONA_AIF2_FRAME_CTRL_14 0x554 +#define ARIZONA_AIF2_FRAME_CTRL_15 0x555 +#define ARIZONA_AIF2_FRAME_CTRL_16 0x556 #define ARIZONA_AIF2_TX_ENABLES 0x559 #define ARIZONA_AIF2_RX_ENABLES 0x55A #define ARIZONA_AIF2_FORCE_WRITE 0x55B @@ -2245,6 +2255,46 @@ #define ARIZONA_MICB3_ENA_WIDTH 1 /* MICB3_ENA */ /* + * R549 (0x225) - HP Ctrl 1L + */ +#define ARIZONA_RMV_SHRT_HP1L 0x4000 /* RMV_SHRT_HP1L */ +#define ARIZONA_RMV_SHRT_HP1L_MASK 0x4000 /* RMV_SHRT_HP1L */ +#define ARIZONA_RMV_SHRT_HP1L_SHIFT 14 /* RMV_SHRT_HP1L */ +#define ARIZONA_RMV_SHRT_HP1L_WIDTH 1 /* RMV_SHRT_HP1L */ +#define ARIZONA_HP1L_FLWR 0x0004 /* HP1L_FLWR */ +#define ARIZONA_HP1L_FLWR_MASK 0x0004 /* HP1L_FLWR */ +#define ARIZONA_HP1L_FLWR_SHIFT 2 /* HP1L_FLWR */ +#define ARIZONA_HP1L_FLWR_WIDTH 1 /* HP1L_FLWR */ +#define ARIZONA_HP1L_SHRTI 0x0002 /* HP1L_SHRTI */ +#define ARIZONA_HP1L_SHRTI_MASK 0x0002 /* HP1L_SHRTI */ +#define ARIZONA_HP1L_SHRTI_SHIFT 1 /* HP1L_SHRTI */ +#define ARIZONA_HP1L_SHRTI_WIDTH 1 /* HP1L_SHRTI */ +#define ARIZONA_HP1L_SHRTO 0x0001 /* HP1L_SHRTO */ +#define ARIZONA_HP1L_SHRTO_MASK 0x0001 /* HP1L_SHRTO */ +#define ARIZONA_HP1L_SHRTO_SHIFT 0 /* HP1L_SHRTO */ +#define ARIZONA_HP1L_SHRTO_WIDTH 1 /* HP1L_SHRTO */ + +/* + * R550 (0x226) - HP Ctrl 1R + */ +#define ARIZONA_RMV_SHRT_HP1R 0x4000 /* RMV_SHRT_HP1R */ +#define ARIZONA_RMV_SHRT_HP1R_MASK 0x4000 /* RMV_SHRT_HP1R */ +#define ARIZONA_RMV_SHRT_HP1R_SHIFT 14 /* RMV_SHRT_HP1R */ +#define ARIZONA_RMV_SHRT_HP1R_WIDTH 1 /* RMV_SHRT_HP1R */ +#define ARIZONA_HP1R_FLWR 0x0004 /* HP1R_FLWR */ +#define ARIZONA_HP1R_FLWR_MASK 0x0004 /* HP1R_FLWR */ +#define ARIZONA_HP1R_FLWR_SHIFT 2 /* HP1R_FLWR */ +#define ARIZONA_HP1R_FLWR_WIDTH 1 /* HP1R_FLWR */ +#define ARIZONA_HP1R_SHRTI 0x0002 /* HP1R_SHRTI */ +#define ARIZONA_HP1R_SHRTI_MASK 0x0002 /* HP1R_SHRTI */ +#define ARIZONA_HP1R_SHRTI_SHIFT 1 /* HP1R_SHRTI */ +#define ARIZONA_HP1R_SHRTI_WIDTH 1 /* HP1R_SHRTI */ +#define ARIZONA_HP1R_SHRTO 0x0001 /* HP1R_SHRTO */ +#define ARIZONA_HP1R_SHRTO_MASK 0x0001 /* HP1R_SHRTO */ +#define ARIZONA_HP1R_SHRTO_SHIFT 0 /* HP1R_SHRTO */ +#define ARIZONA_HP1R_SHRTO_WIDTH 1 /* HP1R_SHRTO */ + +/* * R659 (0x293) - Accessory Detect Mode 1 */ #define ARIZONA_ACCDET_SRC 0x2000 /* ACCDET_SRC */ diff --git a/include/linux/mfd/atmel-hlcdc.h b/include/linux/mfd/atmel-hlcdc.h new file mode 100644 index 00000000000..1279ab1644b --- /dev/null +++ b/include/linux/mfd/atmel-hlcdc.h @@ -0,0 +1,85 @@ +/* + * Copyright (C) 2014 Free Electrons + * Copyright (C) 2014 Atmel + * + * Author: Boris BREZILLON <boris.brezillon@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __LINUX_MFD_HLCDC_H +#define __LINUX_MFD_HLCDC_H + +#include <linux/clk.h> +#include <linux/regmap.h> + +#define ATMEL_HLCDC_CFG(i) ((i) * 0x4) +#define ATMEL_HLCDC_SIG_CFG LCDCFG(5) +#define ATMEL_HLCDC_HSPOL BIT(0) +#define ATMEL_HLCDC_VSPOL BIT(1) +#define ATMEL_HLCDC_VSPDLYS BIT(2) +#define ATMEL_HLCDC_VSPDLYE BIT(3) +#define ATMEL_HLCDC_DISPPOL BIT(4) +#define ATMEL_HLCDC_DITHER BIT(6) +#define ATMEL_HLCDC_DISPDLY BIT(7) +#define ATMEL_HLCDC_MODE_MASK GENMASK(9, 8) +#define ATMEL_HLCDC_PP BIT(10) +#define ATMEL_HLCDC_VSPSU BIT(12) +#define ATMEL_HLCDC_VSPHO BIT(13) +#define ATMEL_HLCDC_GUARDTIME_MASK GENMASK(20, 16) + +#define ATMEL_HLCDC_EN 0x20 +#define ATMEL_HLCDC_DIS 0x24 +#define ATMEL_HLCDC_SR 0x28 +#define ATMEL_HLCDC_IER 0x2c +#define ATMEL_HLCDC_IDR 0x30 +#define ATMEL_HLCDC_IMR 0x34 +#define ATMEL_HLCDC_ISR 0x38 + +#define ATMEL_HLCDC_CLKPOL BIT(0) +#define ATMEL_HLCDC_CLKSEL BIT(2) +#define ATMEL_HLCDC_CLKPWMSEL BIT(3) +#define ATMEL_HLCDC_CGDIS(i) BIT(8 + (i)) +#define ATMEL_HLCDC_CLKDIV_SHFT 16 +#define ATMEL_HLCDC_CLKDIV_MASK GENMASK(23, 16) +#define ATMEL_HLCDC_CLKDIV(div) ((div - 2) << ATMEL_HLCDC_CLKDIV_SHFT) + +#define ATMEL_HLCDC_PIXEL_CLK BIT(0) +#define ATMEL_HLCDC_SYNC BIT(1) +#define ATMEL_HLCDC_DISP BIT(2) +#define ATMEL_HLCDC_PWM BIT(3) +#define ATMEL_HLCDC_SIP BIT(4) + +#define ATMEL_HLCDC_SOF BIT(0) +#define ATMEL_HLCDC_SYNCDIS BIT(1) +#define ATMEL_HLCDC_FIFOERR BIT(4) +#define ATMEL_HLCDC_LAYER_STATUS(x) BIT((x) + 8) + +/** + * Structure shared by the MFD device and its subdevices. + * + * @regmap: register map used to access HLCDC IP registers + * @periph_clk: the hlcdc peripheral clock + * @sys_clk: the hlcdc system clock + * @slow_clk: the system slow clk + * @irq: the hlcdc irq + */ +struct atmel_hlcdc { + struct regmap *regmap; + struct clk *periph_clk; + struct clk *sys_clk; + struct clk *slow_clk; + int irq; +}; + +#endif /* __LINUX_MFD_HLCDC_H */ diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h index d0e31a2287a..81589d176ae 100644 --- a/include/linux/mfd/axp20x.h +++ b/include/linux/mfd/axp20x.h @@ -14,6 +14,8 @@ enum { AXP202_ID = 0, AXP209_ID, + AXP288_ID, + NR_AXP20X_VARIANTS, }; #define AXP20X_DATACACHE(m) (0x04 + (m)) @@ -49,11 +51,13 @@ enum { #define AXP20X_IRQ3_EN 0x42 #define AXP20X_IRQ4_EN 0x43 #define AXP20X_IRQ5_EN 0x44 +#define AXP20X_IRQ6_EN 0x45 #define AXP20X_IRQ1_STATE 0x48 #define AXP20X_IRQ2_STATE 0x49 #define AXP20X_IRQ3_STATE 0x4a #define AXP20X_IRQ4_STATE 0x4b #define AXP20X_IRQ5_STATE 0x4c +#define AXP20X_IRQ6_STATE 0x4d /* ADC */ #define AXP20X_ACIN_V_ADC_H 0x56 @@ -116,6 +120,15 @@ enum { #define AXP20X_CC_CTRL 0xb8 #define AXP20X_FG_RES 0xb9 +/* AXP288 specific registers */ +#define AXP288_PMIC_ADC_H 0x56 +#define AXP288_PMIC_ADC_L 0x57 +#define AXP288_ADC_TS_PIN_CTRL 0x84 + +#define AXP288_PMIC_ADC_EN 0x84 +#define AXP288_FG_TUNE5 0xed + + /* Regulators IDs */ enum { AXP20X_LDO1 = 0, @@ -169,12 +182,58 @@ enum { AXP20X_IRQ_GPIO0_INPUT, }; +enum axp288_irqs { + AXP288_IRQ_VBUS_FALL = 2, + AXP288_IRQ_VBUS_RISE, + AXP288_IRQ_OV, + AXP288_IRQ_FALLING_ALT, + AXP288_IRQ_RISING_ALT, + AXP288_IRQ_OV_ALT, + AXP288_IRQ_DONE = 10, + AXP288_IRQ_CHARGING, + AXP288_IRQ_SAFE_QUIT, + AXP288_IRQ_SAFE_ENTER, + AXP288_IRQ_ABSENT, + AXP288_IRQ_APPEND, + AXP288_IRQ_QWBTU, + AXP288_IRQ_WBTU, + AXP288_IRQ_QWBTO, + AXP288_IRQ_WBTO, + AXP288_IRQ_QCBTU, + AXP288_IRQ_CBTU, + AXP288_IRQ_QCBTO, + AXP288_IRQ_CBTO, + AXP288_IRQ_WL2, + AXP288_IRQ_WL1, + AXP288_IRQ_GPADC, + AXP288_IRQ_OT = 31, + AXP288_IRQ_GPIO0, + AXP288_IRQ_GPIO1, + AXP288_IRQ_POKO, + AXP288_IRQ_POKL, + AXP288_IRQ_POKS, + AXP288_IRQ_POKN, + AXP288_IRQ_POKP, + AXP288_IRQ_TIMER, + AXP288_IRQ_MV_CHNG, + AXP288_IRQ_BC_USB_CHNG, +}; + +#define AXP288_TS_ADC_H 0x58 +#define AXP288_TS_ADC_L 0x59 +#define AXP288_GP_ADC_H 0x5a +#define AXP288_GP_ADC_L 0x5b + struct axp20x_dev { struct device *dev; struct i2c_client *i2c_client; struct regmap *regmap; struct regmap_irq_chip_data *regmap_irqc; long variant; + int nr_cells; + struct mfd_cell *cells; + const struct regmap_config *regmap_cfg; + const struct regmap_irq_chip *regmap_irq_chip; }; #endif /* __LINUX_MFD_AXP20X_H */ diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h index 73e1709d4c0..a76bc100bf9 100644 --- a/include/linux/mfd/core.h +++ b/include/linux/mfd/core.h @@ -111,6 +111,13 @@ extern int mfd_add_devices(struct device *parent, int id, struct resource *mem_base, int irq_base, struct irq_domain *irq_domain); +static inline int mfd_add_hotplug_devices(struct device *parent, + const struct mfd_cell *cells, int n_devs) +{ + return mfd_add_devices(parent, PLATFORM_DEVID_AUTO, cells, n_devs, + NULL, 0, NULL); +} + extern void mfd_remove_devices(struct device *parent); #endif diff --git a/include/linux/mfd/dln2.h b/include/linux/mfd/dln2.h new file mode 100644 index 00000000000..004b24576da --- /dev/null +++ b/include/linux/mfd/dln2.h @@ -0,0 +1,103 @@ +#ifndef __LINUX_USB_DLN2_H +#define __LINUX_USB_DLN2_H + +#define DLN2_CMD(cmd, id) ((cmd) | ((id) << 8)) + +struct dln2_platform_data { + u16 handle; /* sub-driver handle (internally used only) */ + u8 port; /* I2C/SPI port */ +}; + +/** + * dln2_event_cb_t - event callback function signature + * + * @pdev - the sub-device that registered this callback + * @echo - the echo header field received in the message + * @data - the data payload + * @len - the data payload length + * + * The callback function is called in interrupt context and the data payload is + * only valid during the call. If the user needs later access of the data, it + * must copy it. + */ + +typedef void (*dln2_event_cb_t)(struct platform_device *pdev, u16 echo, + const void *data, int len); + +/** + * dl2n_register_event_cb - register a callback function for an event + * + * @pdev - the sub-device that registers the callback + * @event - the event for which to register a callback + * @event_cb - the callback function + * + * @return 0 in case of success, negative value in case of error + */ +int dln2_register_event_cb(struct platform_device *pdev, u16 event, + dln2_event_cb_t event_cb); + +/** + * dln2_unregister_event_cb - unregister the callback function for an event + * + * @pdev - the sub-device that registered the callback + * @event - the event for which to register a callback + */ +void dln2_unregister_event_cb(struct platform_device *pdev, u16 event); + +/** + * dln2_transfer - issue a DLN2 command and wait for a response and the + * associated data + * + * @pdev - the sub-device which is issuing this transfer + * @cmd - the command to be sent to the device + * @obuf - the buffer to be sent to the device; it can be NULL if the user + * doesn't need to transmit data with this command + * @obuf_len - the size of the buffer to be sent to the device + * @ibuf - any data associated with the response will be copied here; it can be + * NULL if the user doesn't need the response data + * @ibuf_len - must be initialized to the input buffer size; it will be modified + * to indicate the actual data transferred; + * + * @return 0 for success, negative value for errors + */ +int dln2_transfer(struct platform_device *pdev, u16 cmd, + const void *obuf, unsigned obuf_len, + void *ibuf, unsigned *ibuf_len); + +/** + * dln2_transfer_rx - variant of @dln2_transfer() where TX buffer is not needed + * + * @pdev - the sub-device which is issuing this transfer + * @cmd - the command to be sent to the device + * @ibuf - any data associated with the response will be copied here; it can be + * NULL if the user doesn't need the response data + * @ibuf_len - must be initialized to the input buffer size; it will be modified + * to indicate the actual data transferred; + * + * @return 0 for success, negative value for errors + */ + +static inline int dln2_transfer_rx(struct platform_device *pdev, u16 cmd, + void *ibuf, unsigned *ibuf_len) +{ + return dln2_transfer(pdev, cmd, NULL, 0, ibuf, ibuf_len); +} + +/** + * dln2_transfer_tx - variant of @dln2_transfer() where RX buffer is not needed + * + * @pdev - the sub-device which is issuing this transfer + * @cmd - the command to be sent to the device + * @obuf - the buffer to be sent to the device; it can be NULL if the + * user doesn't need to transmit data with this command + * @obuf_len - the size of the buffer to be sent to the device + * + * @return 0 for success, negative value for errors + */ +static inline int dln2_transfer_tx(struct platform_device *pdev, u16 cmd, + const void *obuf, unsigned obuf_len) +{ + return dln2_transfer(pdev, cmd, obuf, obuf_len, NULL, NULL); +} + +#endif diff --git a/include/linux/mfd/max77686.h b/include/linux/mfd/max77686.h index 7e6dc4b2b79..553f7d09258 100644 --- a/include/linux/mfd/max77686.h +++ b/include/linux/mfd/max77686.h @@ -131,13 +131,6 @@ enum max77686_opmode { MAX77686_OPMODE_STANDBY, }; -enum max77802_opmode { - MAX77802_OPMODE_OFF, - MAX77802_OPMODE_STANDBY, - MAX77802_OPMODE_LP, - MAX77802_OPMODE_NORMAL, -}; - struct max77686_opmode_data { int id; int mode; diff --git a/include/linux/mfd/max77693-private.h b/include/linux/mfd/max77693-private.h index fc17d56581b..08dae01258b 100644 --- a/include/linux/mfd/max77693-private.h +++ b/include/linux/mfd/max77693-private.h @@ -26,7 +26,6 @@ #include <linux/i2c.h> -#define MAX77693_NUM_IRQ_MUIC_REGS 3 #define MAX77693_REG_INVALID (0xff) /* Slave addr = 0xCC: PMIC, Charger, Flash LED */ @@ -330,6 +329,13 @@ enum max77693_irq_source { MAX77693_IRQ_GROUP_NR, }; +#define SRC_IRQ_CHARGER BIT(0) +#define SRC_IRQ_TOP BIT(1) +#define SRC_IRQ_FLASH BIT(2) +#define SRC_IRQ_MUIC BIT(3) +#define SRC_IRQ_ALL (SRC_IRQ_CHARGER | SRC_IRQ_TOP \ + | SRC_IRQ_FLASH | SRC_IRQ_MUIC) + #define LED_IRQ_FLED2_OPEN BIT(0) #define LED_IRQ_FLED2_SHORT BIT(1) #define LED_IRQ_FLED1_OPEN BIT(2) diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h index 74346d5e789..0c12628e91c 100644 --- a/include/linux/mfd/rtsx_pci.h +++ b/include/linux/mfd/rtsx_pci.h @@ -558,6 +558,7 @@ #define SD_SAMPLE_POINT_CTL 0xFDA7 #define SD_PUSH_POINT_CTL 0xFDA8 #define SD_CMD0 0xFDA9 +#define SD_CMD_START 0x40 #define SD_CMD1 0xFDAA #define SD_CMD2 0xFDAB #define SD_CMD3 0xFDAC @@ -707,6 +708,14 @@ #define PM_CTRL1 0xFF44 #define PM_CTRL2 0xFF45 #define PM_CTRL3 0xFF46 +#define SDIO_SEND_PME_EN 0x80 +#define FORCE_RC_MODE_ON 0x40 +#define FORCE_RX50_LINK_ON 0x20 +#define D3_DELINK_MODE_EN 0x10 +#define USE_PESRTB_CTL_DELINK 0x08 +#define DELAY_PIN_WAKE 0x04 +#define RESET_PIN_WAKE 0x02 +#define PM_WAKE_EN 0x01 #define PM_CTRL4 0xFF47 /* Memory mapping */ @@ -752,6 +761,14 @@ #define PHY_DUM_REG 0x1F #define LCTLR 0x80 +#define LCTLR_EXT_SYNC 0x80 +#define LCTLR_COMMON_CLOCK_CFG 0x40 +#define LCTLR_RETRAIN_LINK 0x20 +#define LCTLR_LINK_DISABLE 0x10 +#define LCTLR_RCB 0x08 +#define LCTLR_RESERVED 0x04 +#define LCTLR_ASPM_CTL_MASK 0x03 + #define PCR_SETTING_REG1 0x724 #define PCR_SETTING_REG2 0x814 #define PCR_SETTING_REG3 0x747 @@ -967,4 +984,24 @@ static inline u8 *rtsx_pci_get_cmd_data(struct rtsx_pcr *pcr) return (u8 *)(pcr->host_cmds_ptr); } +static inline int rtsx_pci_update_cfg_byte(struct rtsx_pcr *pcr, int addr, + u8 mask, u8 append) +{ + int err; + u8 val; + + err = pci_read_config_byte(pcr->pci, addr, &val); + if (err < 0) + return err; + return pci_write_config_byte(pcr->pci, addr, (val & mask) | append); +} + +static inline void rtsx_pci_write_be32(struct rtsx_pcr *pcr, u16 reg, u32 val) +{ + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg, 0xFF, val >> 24); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg + 1, 0xFF, val >> 16); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg + 2, 0xFF, val >> 8); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg + 3, 0xFF, val); +} + #endif diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h index 1825edacbda..3fdb7cfbffb 100644 --- a/include/linux/mfd/samsung/core.h +++ b/include/linux/mfd/samsung/core.h @@ -28,6 +28,7 @@ #define MIN_800_MV 800000 #define MIN_750_MV 750000 #define MIN_600_MV 600000 +#define MIN_500_MV 500000 /* Macros to represent steps for LDO/BUCK */ #define STEP_50_MV 50000 @@ -41,6 +42,7 @@ enum sec_device_type { S5M8767X, S2MPA01, S2MPS11X, + S2MPS13X, S2MPS14X, S2MPU02, }; diff --git a/include/linux/mfd/samsung/s2mps13.h b/include/linux/mfd/samsung/s2mps13.h new file mode 100644 index 00000000000..ce5dda8958f --- /dev/null +++ b/include/linux/mfd/samsung/s2mps13.h @@ -0,0 +1,186 @@ +/* + * s2mps13.h + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __LINUX_MFD_S2MPS13_H +#define __LINUX_MFD_S2MPS13_H + +/* S2MPS13 registers */ +enum s2mps13_reg { + S2MPS13_REG_ID, + S2MPS13_REG_INT1, + S2MPS13_REG_INT2, + S2MPS13_REG_INT3, + S2MPS13_REG_INT1M, + S2MPS13_REG_INT2M, + S2MPS13_REG_INT3M, + S2MPS13_REG_ST1, + S2MPS13_REG_ST2, + S2MPS13_REG_PWRONSRC, + S2MPS13_REG_OFFSRC, + S2MPS13_REG_BU_CHG, + S2MPS13_REG_RTCCTRL, + S2MPS13_REG_CTRL1, + S2MPS13_REG_CTRL2, + S2MPS13_REG_RSVD1, + S2MPS13_REG_RSVD2, + S2MPS13_REG_RSVD3, + S2MPS13_REG_RSVD4, + S2MPS13_REG_RSVD5, + S2MPS13_REG_RSVD6, + S2MPS13_REG_CTRL3, + S2MPS13_REG_RSVD7, + S2MPS13_REG_RSVD8, + S2MPS13_REG_WRSTBI, + S2MPS13_REG_B1CTRL, + S2MPS13_REG_B1OUT, + S2MPS13_REG_B2CTRL, + S2MPS13_REG_B2OUT, + S2MPS13_REG_B3CTRL, + S2MPS13_REG_B3OUT, + S2MPS13_REG_B4CTRL, + S2MPS13_REG_B4OUT, + S2MPS13_REG_B5CTRL, + S2MPS13_REG_B5OUT, + S2MPS13_REG_B6CTRL, + S2MPS13_REG_B6OUT, + S2MPS13_REG_B7CTRL, + S2MPS13_REG_B7OUT, + S2MPS13_REG_B8CTRL, + S2MPS13_REG_B8OUT, + S2MPS13_REG_B9CTRL, + S2MPS13_REG_B9OUT, + S2MPS13_REG_B10CTRL, + S2MPS13_REG_B10OUT, + S2MPS13_REG_BB1CTRL, + S2MPS13_REG_BB1OUT, + S2MPS13_REG_BUCK_RAMP1, + S2MPS13_REG_BUCK_RAMP2, + S2MPS13_REG_LDO_DVS1, + S2MPS13_REG_LDO_DVS2, + S2MPS13_REG_LDO_DVS3, + S2MPS13_REG_B6OUT2, + S2MPS13_REG_L1CTRL, + S2MPS13_REG_L2CTRL, + S2MPS13_REG_L3CTRL, + S2MPS13_REG_L4CTRL, + S2MPS13_REG_L5CTRL, + S2MPS13_REG_L6CTRL, + S2MPS13_REG_L7CTRL, + S2MPS13_REG_L8CTRL, + S2MPS13_REG_L9CTRL, + S2MPS13_REG_L10CTRL, + S2MPS13_REG_L11CTRL, + S2MPS13_REG_L12CTRL, + S2MPS13_REG_L13CTRL, + S2MPS13_REG_L14CTRL, + S2MPS13_REG_L15CTRL, + S2MPS13_REG_L16CTRL, + S2MPS13_REG_L17CTRL, + S2MPS13_REG_L18CTRL, + S2MPS13_REG_L19CTRL, + S2MPS13_REG_L20CTRL, + S2MPS13_REG_L21CTRL, + S2MPS13_REG_L22CTRL, + S2MPS13_REG_L23CTRL, + S2MPS13_REG_L24CTRL, + S2MPS13_REG_L25CTRL, + S2MPS13_REG_L26CTRL, + S2MPS13_REG_L27CTRL, + S2MPS13_REG_L28CTRL, + S2MPS13_REG_L30CTRL, + S2MPS13_REG_L31CTRL, + S2MPS13_REG_L32CTRL, + S2MPS13_REG_L33CTRL, + S2MPS13_REG_L34CTRL, + S2MPS13_REG_L35CTRL, + S2MPS13_REG_L36CTRL, + S2MPS13_REG_L37CTRL, + S2MPS13_REG_L38CTRL, + S2MPS13_REG_L39CTRL, + S2MPS13_REG_L40CTRL, + S2MPS13_REG_LDODSCH1, + S2MPS13_REG_LDODSCH2, + S2MPS13_REG_LDODSCH3, + S2MPS13_REG_LDODSCH4, + S2MPS13_REG_LDODSCH5, +}; + +/* regulator ids */ +enum s2mps13_regulators { + S2MPS13_LDO1, + S2MPS13_LDO2, + S2MPS13_LDO3, + S2MPS13_LDO4, + S2MPS13_LDO5, + S2MPS13_LDO6, + S2MPS13_LDO7, + S2MPS13_LDO8, + S2MPS13_LDO9, + S2MPS13_LDO10, + S2MPS13_LDO11, + S2MPS13_LDO12, + S2MPS13_LDO13, + S2MPS13_LDO14, + S2MPS13_LDO15, + S2MPS13_LDO16, + S2MPS13_LDO17, + S2MPS13_LDO18, + S2MPS13_LDO19, + S2MPS13_LDO20, + S2MPS13_LDO21, + S2MPS13_LDO22, + S2MPS13_LDO23, + S2MPS13_LDO24, + S2MPS13_LDO25, + S2MPS13_LDO26, + S2MPS13_LDO27, + S2MPS13_LDO28, + S2MPS13_LDO29, + S2MPS13_LDO30, + S2MPS13_LDO31, + S2MPS13_LDO32, + S2MPS13_LDO33, + S2MPS13_LDO34, + S2MPS13_LDO35, + S2MPS13_LDO36, + S2MPS13_LDO37, + S2MPS13_LDO38, + S2MPS13_LDO39, + S2MPS13_LDO40, + S2MPS13_BUCK1, + S2MPS13_BUCK2, + S2MPS13_BUCK3, + S2MPS13_BUCK4, + S2MPS13_BUCK5, + S2MPS13_BUCK6, + S2MPS13_BUCK7, + S2MPS13_BUCK8, + S2MPS13_BUCK9, + S2MPS13_BUCK10, + + S2MPS13_REGULATOR_MAX, +}; + +/* + * Default ramp delay in uv/us. Datasheet says that ramp delay can be + * controlled however it does not specify which register is used for that. + * Let's assume that default value will be set. + */ +#define S2MPS13_BUCK_RAMP_DELAY 12500 + +#endif /* __LINUX_MFD_S2MPS13_H */ diff --git a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h index ff44374a1a4..c877cad61a1 100644 --- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h +++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h @@ -395,4 +395,43 @@ #define IMX6SL_GPR1_FEC_CLOCK_MUX1_SEL_MASK (0x3 << 17) #define IMX6SL_GPR1_FEC_CLOCK_MUX2_SEL_MASK (0x1 << 14) +/* For imx6sx iomux gpr register field define */ +#define IMX6SX_GPR1_VDEC_SW_RST_MASK (0x1 << 20) +#define IMX6SX_GPR1_VDEC_SW_RST_RESET (0x1 << 20) +#define IMX6SX_GPR1_VDEC_SW_RST_RELEASE (0x0 << 20) +#define IMX6SX_GPR1_VADC_SW_RST_MASK (0x1 << 19) +#define IMX6SX_GPR1_VADC_SW_RST_RESET (0x1 << 19) +#define IMX6SX_GPR1_VADC_SW_RST_RELEASE (0x0 << 19) +#define IMX6SX_GPR1_FEC_CLOCK_MUX_SEL_MASK (0x3 << 13) +#define IMX6SX_GPR1_FEC_CLOCK_PAD_DIR_MASK (0x3 << 17) +#define IMX6SX_GPR1_FEC_CLOCK_MUX_SEL_EXT (0x3 << 13) + +#define IMX6SX_GPR4_FEC_ENET1_STOP_REQ (0x1 << 3) +#define IMX6SX_GPR4_FEC_ENET2_STOP_REQ (0x1 << 4) + +#define IMX6SX_GPR5_DISP_MUX_LDB_CTRL_MASK (0x1 << 3) +#define IMX6SX_GPR5_DISP_MUX_LDB_CTRL_LCDIF1 (0x0 << 3) +#define IMX6SX_GPR5_DISP_MUX_LDB_CTRL_LCDIF2 (0x1 << 3) + +#define IMX6SX_GPR5_CSI2_MUX_CTRL_MASK (0x3 << 27) +#define IMX6SX_GPR5_CSI2_MUX_CTRL_EXT_PIN (0x0 << 27) +#define IMX6SX_GPR5_CSI2_MUX_CTRL_CVD (0x1 << 27) +#define IMX6SX_GPR5_CSI2_MUX_CTRL_VDAC_TO_CSI (0x2 << 27) +#define IMX6SX_GPR5_CSI2_MUX_CTRL_GND (0x3 << 27) +#define IMX6SX_GPR5_VADC_TO_CSI_CAPTURE_EN_MASK (0x1 << 26) +#define IMX6SX_GPR5_VADC_TO_CSI_CAPTURE_EN_ENABLE (0x1 << 26) +#define IMX6SX_GPR5_VADC_TO_CSI_CAPTURE_EN_DISABLE (0x0 << 26) +#define IMX6SX_GPR5_CSI1_MUX_CTRL_MASK (0x3 << 4) +#define IMX6SX_GPR5_CSI1_MUX_CTRL_EXT_PIN (0x0 << 4) +#define IMX6SX_GPR5_CSI1_MUX_CTRL_CVD (0x1 << 4) +#define IMX6SX_GPR5_CSI1_MUX_CTRL_VDAC_TO_CSI (0x2 << 4) +#define IMX6SX_GPR5_CSI1_MUX_CTRL_GND (0x3 << 4) + +#define IMX6SX_GPR5_DISP_MUX_DCIC2_LCDIF2 (0x0 << 2) +#define IMX6SX_GPR5_DISP_MUX_DCIC2_LVDS (0x1 << 2) +#define IMX6SX_GPR5_DISP_MUX_DCIC2_MASK (0x1 << 2) +#define IMX6SX_GPR5_DISP_MUX_DCIC1_LCDIF1 (0x0 << 1) +#define IMX6SX_GPR5_DISP_MUX_DCIC1_LVDS (0x1 << 1) +#define IMX6SX_GPR5_DISP_MUX_DCIC1_MASK (0x1 << 1) + #endif /* __LINUX_IMX6Q_IOMUXC_GPR_H */ diff --git a/include/linux/mfd/tc3589x.h b/include/linux/mfd/tc3589x.h index e6088c2e209..e1c12d84c26 100644 --- a/include/linux/mfd/tc3589x.h +++ b/include/linux/mfd/tc3589x.h @@ -164,13 +164,10 @@ struct tc3589x_keypad_platform_data { /** * struct tc3589x_gpio_platform_data - TC3589x GPIO platform data - * @gpio_base: first gpio number assigned to TC3589x. A maximum of - * %TC3589x_NR_GPIOS GPIOs will be allocated. * @setup: callback for board-specific initialization * @remove: callback for board-specific teardown */ struct tc3589x_gpio_platform_data { - int gpio_base; void (*setup)(struct tc3589x *tc3589x, unsigned gpio_base); void (*remove)(struct tc3589x *tc3589x, unsigned gpio_base); }; @@ -178,18 +175,13 @@ struct tc3589x_gpio_platform_data { /** * struct tc3589x_platform_data - TC3589x platform data * @block: bitmask of blocks to enable (use TC3589x_BLOCK_*) - * @irq_base: base IRQ number. %TC3589x_NR_IRQS irqs will be used. * @gpio: GPIO-specific platform data * @keypad: keypad-specific platform data */ struct tc3589x_platform_data { unsigned int block; - int irq_base; struct tc3589x_gpio_platform_data *gpio; const struct tc3589x_keypad_platform_data *keypad; }; -#define TC3589x_NR_GPIOS 24 -#define TC3589x_NR_IRQS TC3589x_INT_GPIO(TC3589x_NR_GPIOS) - #endif |