diff options
Diffstat (limited to 'include/linux/mfd')
| -rw-r--r-- | include/linux/mfd/88pm860x.h | 20 | ||||
| -rw-r--r-- | include/linux/mfd/ab8500.h | 51 | ||||
| -rw-r--r-- | include/linux/mfd/ab8500/gpadc.h | 32 | ||||
| -rw-r--r-- | include/linux/mfd/ab8500/gpio.h | 21 | ||||
| -rw-r--r-- | include/linux/mfd/ab8500/sysctrl.h | 254 | ||||
| -rw-r--r-- | include/linux/mfd/abx500.h | 1 | ||||
| -rw-r--r-- | include/linux/mfd/core.h | 63 | ||||
| -rw-r--r-- | include/linux/mfd/max8997-private.h | 368 | ||||
| -rw-r--r-- | include/linux/mfd/max8997.h | 117 | ||||
| -rw-r--r-- | include/linux/mfd/mc13xxx.h | 3 | ||||
| -rw-r--r-- | include/linux/mfd/sh_mobile_sdhi.h | 16 | ||||
| -rw-r--r-- | include/linux/mfd/ti_ssp.h | 93 | ||||
| -rw-r--r-- | include/linux/mfd/tps6105x.h | 101 | ||||
| -rw-r--r-- | include/linux/mfd/wl1273-core.h | 2 | ||||
| -rw-r--r-- | include/linux/mfd/wm831x/pdata.h | 9 | ||||
| -rw-r--r-- | include/linux/mfd/wm8994/core.h | 5 |
16 files changed, 1117 insertions, 39 deletions
diff --git a/include/linux/mfd/88pm860x.h b/include/linux/mfd/88pm860x.h index 4db1fbd8969..8fba7972ff5 100644 --- a/include/linux/mfd/88pm860x.h +++ b/include/linux/mfd/88pm860x.h @@ -131,9 +131,11 @@ enum { PM8607_ID_LDO8, PM8607_ID_LDO9, PM8607_ID_LDO10, + PM8607_ID_LDO11, PM8607_ID_LDO12, PM8607_ID_LDO13, PM8607_ID_LDO14, + PM8607_ID_LDO15, PM8607_ID_RG_MAX, }; @@ -310,8 +312,6 @@ struct pm860x_chip { }; -#define PM8607_MAX_REGULATOR PM8607_ID_RG_MAX /* 3 Bucks, 13 LDOs */ - enum { GI2C_PORT = 0, PI2C_PORT, @@ -351,23 +351,31 @@ struct pm860x_platform_data { struct pm860x_led_pdata *led; struct pm860x_touch_pdata *touch; struct pm860x_power_pdata *power; + struct regulator_init_data *regulator; unsigned short companion_addr; /* I2C address of companion chip */ int i2c_port; /* Controlled by GI2C or PI2C */ int irq_mode; /* Clear interrupt by read/write(0/1) */ int irq_base; /* IRQ base number of 88pm860x */ - struct regulator_init_data *regulator[PM8607_MAX_REGULATOR]; + int num_leds; + int num_backlights; + int num_regulators; }; -extern char pm860x_backlight_name[][MFD_NAME_SIZE]; -extern char pm860x_led_name[][MFD_NAME_SIZE]; - extern int pm860x_reg_read(struct i2c_client *, int); extern int pm860x_reg_write(struct i2c_client *, int, unsigned char); extern int pm860x_bulk_read(struct i2c_client *, int, int, unsigned char *); extern int pm860x_bulk_write(struct i2c_client *, int, int, unsigned char *); extern int pm860x_set_bits(struct i2c_client *, int, unsigned char, unsigned char); +extern int pm860x_page_reg_read(struct i2c_client *, int); +extern int pm860x_page_reg_write(struct i2c_client *, int, unsigned char); +extern int pm860x_page_bulk_read(struct i2c_client *, int, int, + unsigned char *); +extern int pm860x_page_bulk_write(struct i2c_client *, int, int, + unsigned char *); +extern int pm860x_page_set_bits(struct i2c_client *, int, unsigned char, + unsigned char); extern int pm860x_device_init(struct pm860x_chip *chip, struct pm860x_platform_data *pdata) __devinit ; diff --git a/include/linux/mfd/ab8500.h b/include/linux/mfd/ab8500.h index 37f56b7c4c1..b3184307519 100644 --- a/include/linux/mfd/ab8500.h +++ b/include/linux/mfd/ab8500.h @@ -74,6 +74,45 @@ #define AB8500_INT_ACC_DETECT_21DB_F 37 #define AB8500_INT_ACC_DETECT_21DB_R 38 #define AB8500_INT_GP_SW_ADC_CONV_END 39 +#define AB8500_INT_ACC_DETECT_1DB_F 33 +#define AB8500_INT_ACC_DETECT_1DB_R 34 +#define AB8500_INT_ACC_DETECT_22DB_F 35 +#define AB8500_INT_ACC_DETECT_22DB_R 36 +#define AB8500_INT_ACC_DETECT_21DB_F 37 +#define AB8500_INT_ACC_DETECT_21DB_R 38 +#define AB8500_INT_GP_SW_ADC_CONV_END 39 +#define AB8500_INT_GPIO6R 40 +#define AB8500_INT_GPIO7R 41 +#define AB8500_INT_GPIO8R 42 +#define AB8500_INT_GPIO9R 43 +#define AB8500_INT_GPIO10R 44 +#define AB8500_INT_GPIO11R 45 +#define AB8500_INT_GPIO12R 46 +#define AB8500_INT_GPIO13R 47 +#define AB8500_INT_GPIO24R 48 +#define AB8500_INT_GPIO25R 49 +#define AB8500_INT_GPIO36R 50 +#define AB8500_INT_GPIO37R 51 +#define AB8500_INT_GPIO38R 52 +#define AB8500_INT_GPIO39R 53 +#define AB8500_INT_GPIO40R 54 +#define AB8500_INT_GPIO41R 55 +#define AB8500_INT_GPIO6F 56 +#define AB8500_INT_GPIO7F 57 +#define AB8500_INT_GPIO8F 58 +#define AB8500_INT_GPIO9F 59 +#define AB8500_INT_GPIO10F 60 +#define AB8500_INT_GPIO11F 61 +#define AB8500_INT_GPIO12F 62 +#define AB8500_INT_GPIO13F 63 +#define AB8500_INT_GPIO24F 64 +#define AB8500_INT_GPIO25F 65 +#define AB8500_INT_GPIO36F 66 +#define AB8500_INT_GPIO37F 67 +#define AB8500_INT_GPIO38F 68 +#define AB8500_INT_GPIO39F 69 +#define AB8500_INT_GPIO40F 70 +#define AB8500_INT_GPIO41F 71 #define AB8500_INT_ADP_SOURCE_ERROR 72 #define AB8500_INT_ADP_SINK_ERROR 73 #define AB8500_INT_ADP_PROBE_PLUG 74 @@ -111,8 +150,8 @@ * @dev: parent device * @lock: read/write operations lock * @irq_lock: genirq bus lock - * @revision: chip revision * @irq: irq line + * @chip_id: chip revision id * @write: register write * @read: register read * @rx_buf: rx buf for SPI @@ -124,7 +163,7 @@ struct ab8500 { struct device *dev; struct mutex lock; struct mutex irq_lock; - int revision; + int irq_base; int irq; u8 chip_id; @@ -139,19 +178,27 @@ struct ab8500 { u8 oldmask[AB8500_NUM_IRQ_REGS]; }; +struct regulator_reg_init; struct regulator_init_data; +struct ab8500_gpio_platform_data; /** * struct ab8500_platform_data - AB8500 platform data * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used * @init: board-specific initialization after detection of ab8500 + * @num_regulator_reg_init: number of regulator init registers + * @regulator_reg_init: regulator init registers + * @num_regulator: number of regulators * @regulator: machine-specific constraints for regulators */ struct ab8500_platform_data { int irq_base; void (*init) (struct ab8500 *); + int num_regulator_reg_init; + struct ab8500_regulator_reg_init *regulator_reg_init; int num_regulator; struct regulator_init_data *regulator; + struct ab8500_gpio_platform_data *gpio; }; extern int __devinit ab8500_init(struct ab8500 *ab8500); diff --git a/include/linux/mfd/ab8500/gpadc.h b/include/linux/mfd/ab8500/gpadc.h new file mode 100644 index 00000000000..46b954011f1 --- /dev/null +++ b/include/linux/mfd/ab8500/gpadc.h @@ -0,0 +1,32 @@ +/* + * Copyright (C) 2010 ST-Ericsson SA + * Licensed under GPLv2. + * + * Author: Arun R Murthy <arun.murthy@stericsson.com> + * Author: Daniel Willerud <daniel.willerud@stericsson.com> + */ + +#ifndef _AB8500_GPADC_H +#define _AB8500_GPADC_H + +/* GPADC source: From datasheet(ADCSwSel[4:0] in GPADCCtrl2) */ +#define BAT_CTRL 0x01 +#define BTEMP_BALL 0x02 +#define MAIN_CHARGER_V 0x03 +#define ACC_DETECT1 0x04 +#define ACC_DETECT2 0x05 +#define ADC_AUX1 0x06 +#define ADC_AUX2 0x07 +#define MAIN_BAT_V 0x08 +#define VBUS_V 0x09 +#define MAIN_CHARGER_C 0x0A +#define USB_CHARGER_C 0x0B +#define BK_BAT_V 0x0C +#define DIE_TEMP 0x0D + +struct ab8500_gpadc; + +struct ab8500_gpadc *ab8500_gpadc_get(char *name); +int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 input); + +#endif /* _AB8500_GPADC_H */ diff --git a/include/linux/mfd/ab8500/gpio.h b/include/linux/mfd/ab8500/gpio.h new file mode 100644 index 00000000000..488a8c920a2 --- /dev/null +++ b/include/linux/mfd/ab8500/gpio.h @@ -0,0 +1,21 @@ +/* + * Copyright ST-Ericsson 2010. + * + * Author: Bibek Basu <bibek.basu@stericsson.com> + * Licensed under GPLv2. + */ + +#ifndef _AB8500_GPIO_H +#define _AB8500_GPIO_H + +/* + * Platform data to register a block: only the initial gpio/irq number. + */ + +struct ab8500_gpio_platform_data { + int gpio_base; + u32 irq_base; + u8 config_reg[7]; +}; + +#endif /* _AB8500_GPIO_H */ diff --git a/include/linux/mfd/ab8500/sysctrl.h b/include/linux/mfd/ab8500/sysctrl.h new file mode 100644 index 00000000000..10da0291f8f --- /dev/null +++ b/include/linux/mfd/ab8500/sysctrl.h @@ -0,0 +1,254 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com> for ST Ericsson. + * License terms: GNU General Public License (GPL) version 2 + */ +#ifndef __AB8500_SYSCTRL_H +#define __AB8500_SYSCTRL_H + +#include <linux/bitops.h> + +#ifdef CONFIG_AB8500_CORE + +int ab8500_sysctrl_read(u16 reg, u8 *value); +int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value); + +#else + +static inline int ab8500_sysctrl_read(u16 reg, u8 *value) +{ + return 0; +} + +static inline int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value) +{ + return 0; +} + +#endif /* CONFIG_AB8500_CORE */ + +static inline int ab8500_sysctrl_set(u16 reg, u8 bits) +{ + return ab8500_sysctrl_write(reg, bits, bits); +} + +static inline int ab8500_sysctrl_clear(u16 reg, u8 bits) +{ + return ab8500_sysctrl_write(reg, bits, 0); +} + +/* Registers */ +#define AB8500_TURNONSTATUS 0x100 +#define AB8500_RESETSTATUS 0x101 +#define AB8500_PONKEY1PRESSSTATUS 0x102 +#define AB8500_SYSCLKREQSTATUS 0x142 +#define AB8500_STW4500CTRL1 0x180 +#define AB8500_STW4500CTRL2 0x181 +#define AB8500_STW4500CTRL3 0x200 +#define AB8500_MAINWDOGCTRL 0x201 +#define AB8500_MAINWDOGTIMER 0x202 +#define AB8500_LOWBAT 0x203 +#define AB8500_BATTOK 0x204 +#define AB8500_SYSCLKTIMER 0x205 +#define AB8500_SMPSCLKCTRL 0x206 +#define AB8500_SMPSCLKSEL1 0x207 +#define AB8500_SMPSCLKSEL2 0x208 +#define AB8500_SMPSCLKSEL3 0x209 +#define AB8500_SYSULPCLKCONF 0x20A +#define AB8500_SYSULPCLKCTRL1 0x20B +#define AB8500_SYSCLKCTRL 0x20C +#define AB8500_SYSCLKREQ1VALID 0x20D +#define AB8500_SYSTEMCTRLSUP 0x20F +#define AB8500_SYSCLKREQ1RFCLKBUF 0x210 +#define AB8500_SYSCLKREQ2RFCLKBUF 0x211 +#define AB8500_SYSCLKREQ3RFCLKBUF 0x212 +#define AB8500_SYSCLKREQ4RFCLKBUF 0x213 +#define AB8500_SYSCLKREQ5RFCLKBUF 0x214 +#define AB8500_SYSCLKREQ6RFCLKBUF 0x215 +#define AB8500_SYSCLKREQ7RFCLKBUF 0x216 +#define AB8500_SYSCLKREQ8RFCLKBUF 0x217 +#define AB8500_DITHERCLKCTRL 0x220 +#define AB8500_SWATCTRL 0x230 +#define AB8500_HIQCLKCTRL 0x232 +#define AB8500_VSIMSYSCLKCTRL 0x233 + +/* Bits */ +#define AB8500_TURNONSTATUS_PORNVBAT BIT(0) +#define AB8500_TURNONSTATUS_PONKEY1DBF BIT(1) +#define AB8500_TURNONSTATUS_PONKEY2DBF BIT(2) +#define AB8500_TURNONSTATUS_RTCALARM BIT(3) +#define AB8500_TURNONSTATUS_MAINCHDET BIT(4) +#define AB8500_TURNONSTATUS_VBUSDET BIT(5) +#define AB8500_TURNONSTATUS_USBIDDETECT BIT(6) + +#define AB8500_RESETSTATUS_RESETN4500NSTATUS BIT(0) +#define AB8500_RESETSTATUS_SWRESETN4500NSTATUS BIT(2) + +#define AB8500_PONKEY1PRESSSTATUS_PONKEY1PRESSTIME_MASK 0x7F +#define AB8500_PONKEY1PRESSSTATUS_PONKEY1PRESSTIME_SHIFT 0 + +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ1STATUS BIT(0) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ2STATUS BIT(1) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ3STATUS BIT(2) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ4STATUS BIT(3) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ5STATUS BIT(4) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ6STATUS BIT(5) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ7STATUS BIT(6) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ8STATUS BIT(7) + +#define AB8500_STW4500CTRL1_SWOFF BIT(0) +#define AB8500_STW4500CTRL1_SWRESET4500N BIT(1) +#define AB8500_STW4500CTRL1_THDB8500SWOFF BIT(2) + +#define AB8500_STW4500CTRL2_RESETNVAUX1VALID BIT(0) +#define AB8500_STW4500CTRL2_RESETNVAUX2VALID BIT(1) +#define AB8500_STW4500CTRL2_RESETNVAUX3VALID BIT(2) +#define AB8500_STW4500CTRL2_RESETNVMODVALID BIT(3) +#define AB8500_STW4500CTRL2_RESETNVEXTSUPPLY1VALID BIT(4) +#define AB8500_STW4500CTRL2_RESETNVEXTSUPPLY2VALID BIT(5) +#define AB8500_STW4500CTRL2_RESETNVEXTSUPPLY3VALID BIT(6) +#define AB8500_STW4500CTRL2_RESETNVSMPS1VALID BIT(7) + +#define AB8500_STW4500CTRL3_CLK32KOUT2DIS BIT(0) +#define AB8500_STW4500CTRL3_RESETAUDN BIT(1) +#define AB8500_STW4500CTRL3_RESETDENCN BIT(2) +#define AB8500_STW4500CTRL3_THSDENA BIT(3) + +#define AB8500_MAINWDOGCTRL_MAINWDOGENA BIT(0) +#define AB8500_MAINWDOGCTRL_MAINWDOGKICK BIT(1) +#define AB8500_MAINWDOGCTRL_WDEXPTURNONVALID BIT(4) + +#define AB8500_MAINWDOGTIMER_MAINWDOGTIMER_MASK 0x7F +#define AB8500_MAINWDOGTIMER_MAINWDOGTIMER_SHIFT 0 + +#define AB8500_LOWBAT_LOWBATENA BIT(0) +#define AB8500_LOWBAT_LOWBAT_MASK 0x7E +#define AB8500_LOWBAT_LOWBAT_SHIFT 1 + +#define AB8500_BATTOK_BATTOKSEL0THF_MASK 0x0F +#define AB8500_BATTOK_BATTOKSEL0THF_SHIFT 0 +#define AB8500_BATTOK_BATTOKSEL1THF_MASK 0xF0 +#define AB8500_BATTOK_BATTOKSEL1THF_SHIFT 4 + +#define AB8500_SYSCLKTIMER_SYSCLKTIMER_MASK 0x0F +#define AB8500_SYSCLKTIMER_SYSCLKTIMER_SHIFT 0 +#define AB8500_SYSCLKTIMER_SYSCLKTIMERADJ_MASK 0xF0 +#define AB8500_SYSCLKTIMER_SYSCLKTIMERADJ_SHIFT 4 + +#define AB8500_SMPSCLKCTRL_SMPSCLKINTSEL_MASK 0x03 +#define AB8500_SMPSCLKCTRL_SMPSCLKINTSEL_SHIFT 0 +#define AB8500_SMPSCLKCTRL_3M2CLKINTENA BIT(2) + +#define AB8500_SMPSCLKSEL1_VARMCLKSEL_MASK 0x07 +#define AB8500_SMPSCLKSEL1_VARMCLKSEL_SHIFT 0 +#define AB8500_SMPSCLKSEL1_VAPECLKSEL_MASK 0x38 +#define AB8500_SMPSCLKSEL1_VAPECLKSEL_SHIFT 3 + +#define AB8500_SMPSCLKSEL2_VMODCLKSEL_MASK 0x07 +#define AB8500_SMPSCLKSEL2_VMODCLKSEL_SHIFT 0 +#define AB8500_SMPSCLKSEL2_VSMPS1CLKSEL_MASK 0x38 +#define AB8500_SMPSCLKSEL2_VSMPS1CLKSEL_SHIFT 3 + +#define AB8500_SMPSCLKSEL3_VSMPS2CLKSEL_MASK 0x07 +#define AB8500_SMPSCLKSEL3_VSMPS2CLKSEL_SHIFT 0 +#define AB8500_SMPSCLKSEL3_VSMPS3CLKSEL_MASK 0x38 +#define AB8500_SMPSCLKSEL3_VSMPS3CLKSEL_SHIFT 3 + +#define AB8500_SYSULPCLKCONF_ULPCLKCONF_MASK 0x03 +#define AB8500_SYSULPCLKCONF_ULPCLKCONF_SHIFT 0 +#define AB8500_SYSULPCLKCONF_CLK27MHZSTRE BIT(2) +#define AB8500_SYSULPCLKCONF_TVOUTCLKDELN BIT(3) +#define AB8500_SYSULPCLKCONF_TVOUTCLKINV BIT(4) +#define AB8500_SYSULPCLKCONF_ULPCLKSTRE BIT(5) +#define AB8500_SYSULPCLKCONF_CLK27MHZBUFENA BIT(6) +#define AB8500_SYSULPCLKCONF_CLK27MHZPDENA BIT(7) + +#define AB8500_SYSULPCLKCTRL1_SYSULPCLKINTSEL_MASK 0x03 +#define AB8500_SYSULPCLKCTRL1_SYSULPCLKINTSEL_SHIFT 0 +#define AB8500_SYSULPCLKCTRL1_ULPCLKREQ BIT(2) +#define AB8500_SYSULPCLKCTRL1_4500SYSCLKREQ BIT(3) +#define AB8500_SYSULPCLKCTRL1_AUDIOCLKENA BIT(4) +#define AB8500_SYSULPCLKCTRL1_SYSCLKBUF2REQ BIT(5) +#define AB8500_SYSULPCLKCTRL1_SYSCLKBUF3REQ BIT(6) +#define AB8500_SYSULPCLKCTRL1_SYSCLKBUF4REQ BIT(7) + +#define AB8500_SYSCLKCTRL_TVOUTPLLENA BIT(0) +#define AB8500_SYSCLKCTRL_TVOUTCLKENA BIT(1) +#define AB8500_SYSCLKCTRL_USBCLKENA BIT(2) + +#define AB8500_SYSCLKREQ1VALID_SYSCLKREQ1VALID BIT(0) +#define AB8500_SYSCLKREQ1VALID_ULPCLKREQ1VALID BIT(1) +#define AB8500_SYSCLKREQ1VALID_USBSYSCLKREQ1VALID BIT(2) + +#define AB8500_SYSTEMCTRLSUP_EXTSUP12LPNCLKSEL_MASK 0x03 +#define AB8500_SYSTEMCTRLSUP_EXTSUP12LPNCLKSEL_SHIFT 0 +#define AB8500_SYSTEMCTRLSUP_EXTSUP3LPNCLKSEL_MASK 0x0C +#define AB8500_SYSTEMCTRLSUP_EXTSUP3LPNCLKSEL_SHIFT 2 +#define AB8500_SYSTEMCTRLSUP_INTDB8500NOD BIT(4) + +#define AB8500_SYSCLKREQ1RFCLKBUF_SYSCLKREQ1RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ1RFCLKBUF_SYSCLKREQ1RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ1RFCLKBUF_SYSCLKREQ1RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ2RFCLKBUF_SYSCLKREQ2RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ2RFCLKBUF_SYSCLKREQ2RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ2RFCLKBUF_SYSCLKREQ2RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ3RFCLKBUF_SYSCLKREQ3RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ3RFCLKBUF_SYSCLKREQ3RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ3RFCLKBUF_SYSCLKREQ3RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ4RFCLKBUF_SYSCLKREQ4RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ4RFCLKBUF_SYSCLKREQ4RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ4RFCLKBUF_SYSCLKREQ4RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ5RFCLKBUF_SYSCLKREQ5RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ5RFCLKBUF_SYSCLKREQ5RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ5RFCLKBUF_SYSCLKREQ5RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ6RFCLKBUF_SYSCLKREQ6RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ6RFCLKBUF_SYSCLKREQ6RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ6RFCLKBUF_SYSCLKREQ6RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ7RFCLKBUF_SYSCLKREQ7RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ7RFCLKBUF_SYSCLKREQ7RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ7RFCLKBUF_SYSCLKREQ7RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ8RFCLKBUF_SYSCLKREQ8RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ8RFCLKBUF_SYSCLKREQ8RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ8RFCLKBUF_SYSCLKREQ8RFCLKBUF4 BIT(4) + +#define AB8500_DITHERCLKCTRL_VARMDITHERENA BIT(0) +#define AB8500_DITHERCLKCTRL_VSMPS3DITHERENA BIT(1) +#define AB8500_DITHERCLKCTRL_VSMPS1DITHERENA BIT(2) +#define AB8500_DITHERCLKCTRL_VSMPS2DITHERENA BIT(3) +#define AB8500_DITHERCLKCTRL_VMODDITHERENA BIT(4) +#define AB8500_DITHERCLKCTRL_VAPEDITHERENA BIT(5) +#define AB8500_DITHERCLKCTRL_DITHERDEL_MASK 0xC0 +#define AB8500_DITHERCLKCTRL_DITHERDEL_SHIFT 6 + +#define AB8500_SWATCTRL_UPDATERF BIT(0) +#define AB8500_SWATCTRL_SWATENABLE BIT(1) +#define AB8500_SWATCTRL_RFOFFTIMER_MASK 0x1C +#define AB8500_SWATCTRL_RFOFFTIMER_SHIFT 2 +#define AB8500_SWATCTRL_SWATBIT5 BIT(6) + +#define AB8500_HIQCLKCTRL_SYSCLKREQ1HIQENAVALID BIT(0) +#define AB8500_HIQCLKCTRL_SYSCLKREQ2HIQENAVALID BIT(1) +#define AB8500_HIQCLKCTRL_SYSCLKREQ3HIQENAVALID BIT(2) +#define AB8500_HIQCLKCTRL_SYSCLKREQ4HIQENAVALID BIT(3) +#define AB8500_HIQCLKCTRL_SYSCLKREQ5HIQENAVALID BIT(4) +#define AB8500_HIQCLKCTRL_SYSCLKREQ6HIQENAVALID BIT(5) +#define AB8500_HIQCLKCTRL_SYSCLKREQ7HIQENAVALID BIT(6) +#define AB8500_HIQCLKCTRL_SYSCLKREQ8HIQENAVALID BIT(7) + +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ1VALID BIT(0) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ2VALID BIT(1) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ3VALID BIT(2) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ4VALID BIT(3) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ5VALID BIT(4) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ6VALID BIT(5) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ7VALID BIT(6) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ8VALID BIT(7) + +#endif /* __AB8500_SYSCTRL_H */ diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h index 67bd6f7ecf3..7d9b6ae1c20 100644 --- a/include/linux/mfd/abx500.h +++ b/include/linux/mfd/abx500.h @@ -186,7 +186,6 @@ struct abx500_init_settings { struct ab3550_platform_data { struct {unsigned int base; unsigned int count; } irq; void *dev_data[AB3550_NUM_DEVICES]; - size_t dev_data_sz[AB3550_NUM_DEVICES]; struct abx500_init_settings *init_settings; unsigned int init_settings_sz; }; diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h index 835996e167e..ad1b19aa650 100644 --- a/include/linux/mfd/core.h +++ b/include/linux/mfd/core.h @@ -25,22 +25,20 @@ struct mfd_cell { const char *name; int id; + /* refcounting for multiple drivers to use a single cell */ + atomic_t *usage_count; int (*enable)(struct platform_device *dev); int (*disable)(struct platform_device *dev); + int (*suspend)(struct platform_device *dev); int (*resume)(struct platform_device *dev); - /* driver-specific data for MFD-aware "cell" drivers */ - void *driver_data; - - /* platform_data can be used to either pass data to "generic" - driver or as a hook to mfd_cell for the "cell" drivers */ - void *platform_data; - size_t data_size; + /* mfd_data can be used to pass data to client drivers */ + void *mfd_data; /* - * This resources can be specified relatively to the parent device. - * For accessing device you should use resources from device + * These resources can be specified relative to the parent device. + * For accessing hardware you should use resources from the platform dev */ int num_resources; const struct resource *resources; @@ -55,8 +53,53 @@ struct mfd_cell { bool pm_runtime_no_callbacks; }; +/* + * Convenience functions for clients using shared cells. Refcounting + * happens automatically, with the cell's enable/disable callbacks + * being called only when a device is first being enabled or no other + * clients are making use of it. + */ +extern int mfd_cell_enable(struct platform_device *pdev); +extern int mfd_cell_disable(struct platform_device *pdev); + +/* + * "Clone" multiple platform devices for a single cell. This is to be used + * for devices that have multiple users of a cell. For example, if an mfd + * driver wants the cell "foo" to be used by a GPIO driver, an MTD driver, + * and a platform driver, the following bit of code would be use after first + * calling mfd_add_devices(): + * + * const char *fclones[] = { "foo-gpio", "foo-mtd" }; + * err = mfd_clone_cells("foo", fclones, ARRAY_SIZE(fclones)); + * + * Each driver (MTD, GPIO, and platform driver) would then register + * platform_drivers for "foo-mtd", "foo-gpio", and "foo", respectively. + * The cell's .enable/.disable hooks should be used to deal with hardware + * resource contention. + */ +extern int mfd_clone_cell(const char *cell, const char **clones, + size_t n_clones); + +/* + * Given a platform device that's been created by mfd_add_devices(), fetch + * the mfd_cell that created it. + */ +static inline const struct mfd_cell *mfd_get_cell(struct platform_device *pdev) +{ + return pdev->dev.platform_data; +} + +/* + * Given a platform device that's been created by mfd_add_devices(), fetch + * the .mfd_data entry from the mfd_cell that created it. + */ +static inline void *mfd_get_data(struct platform_device *pdev) +{ + return mfd_get_cell(pdev)->mfd_data; +} + extern int mfd_add_devices(struct device *parent, int id, - const struct mfd_cell *cells, int n_devs, + struct mfd_cell *cells, int n_devs, struct resource *mem_base, int irq_base); diff --git a/include/linux/mfd/max8997-private.h b/include/linux/mfd/max8997-private.h new file mode 100644 index 00000000000..69d1010e2e5 --- /dev/null +++ b/include/linux/mfd/max8997-private.h @@ -0,0 +1,368 @@ +/* + * max8997.h - Voltage regulator driver for the Maxim 8997 + * + * Copyright (C) 2010 Samsung Electrnoics + * MyungJoo Ham <myungjoo.ham@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __LINUX_MFD_MAX8997_PRIV_H +#define __LINUX_MFD_MAX8997_PRIV_H + +#include <linux/i2c.h> + +#define MAX8997_REG_INVALID (0xff) + +enum max8997_pmic_reg { + MAX8997_REG_PMIC_ID0 = 0x00, + MAX8997_REG_PMIC_ID1 = 0x01, + MAX8997_REG_INTSRC = 0x02, + MAX8997_REG_INT1 = 0x03, + MAX8997_REG_INT2 = 0x04, + MAX8997_REG_INT3 = 0x05, + MAX8997_REG_INT4 = 0x06, + + MAX8997_REG_INT1MSK = 0x08, + MAX8997_REG_INT2MSK = 0x09, + MAX8997_REG_INT3MSK = 0x0a, + MAX8997_REG_INT4MSK = 0x0b, + + MAX8997_REG_STATUS1 = 0x0d, + MAX8997_REG_STATUS2 = 0x0e, + MAX8997_REG_STATUS3 = 0x0f, + MAX8997_REG_STATUS4 = 0x10, + + MAX8997_REG_MAINCON1 = 0x13, + MAX8997_REG_MAINCON2 = 0x14, + MAX8997_REG_BUCKRAMP = 0x15, + + MAX8997_REG_BUCK1CTRL = 0x18, + MAX8997_REG_BUCK1DVS1 = 0x19, + MAX8997_REG_BUCK1DVS2 = 0x1a, + MAX8997_REG_BUCK1DVS3 = 0x1b, + MAX8997_REG_BUCK1DVS4 = 0x1c, + MAX8997_REG_BUCK1DVS5 = 0x1d, + MAX8997_REG_BUCK1DVS6 = 0x1e, + MAX8997_REG_BUCK1DVS7 = 0x1f, + MAX8997_REG_BUCK1DVS8 = 0x20, + MAX8997_REG_BUCK2CTRL = 0x21, + MAX8997_REG_BUCK2DVS1 = 0x22, + MAX8997_REG_BUCK2DVS2 = 0x23, + MAX8997_REG_BUCK2DVS3 = 0x24, + MAX8997_REG_BUCK2DVS4 = 0x25, + MAX8997_REG_BUCK2DVS5 = 0x26, + MAX8997_REG_BUCK2DVS6 = 0x27, + MAX8997_REG_BUCK2DVS7 = 0x28, + MAX8997_REG_BUCK2DVS8 = 0x29, + MAX8997_REG_BUCK3CTRL = 0x2a, + MAX8997_REG_BUCK3DVS = 0x2b, + MAX8997_REG_BUCK4CTRL = 0x2c, + MAX8997_REG_BUCK4DVS = 0x2d, + MAX8997_REG_BUCK5CTRL = 0x2e, + MAX8997_REG_BUCK5DVS1 = 0x2f, + MAX8997_REG_BUCK5DVS2 = 0x30, + MAX8997_REG_BUCK5DVS3 = 0x31, + MAX8997_REG_BUCK5DVS4 = 0x32, + MAX8997_REG_BUCK5DVS5 = 0x33, + MAX8997_REG_BUCK5DVS6 = 0x34, + MAX8997_REG_BUCK5DVS7 = 0x35, + MAX8997_REG_BUCK5DVS8 = 0x36, + MAX8997_REG_BUCK6CTRL = 0x37, + MAX8997_REG_BUCK6BPSKIPCTRL = 0x38, + MAX8997_REG_BUCK7CTRL = 0x39, + MAX8997_REG_BUCK7DVS = 0x3a, + MAX8997_REG_LDO1CTRL = 0x3b, + MAX8997_REG_LDO2CTRL = 0x3c, + MAX8997_REG_LDO3CTRL = 0x3d, + MAX8997_REG_LDO4CTRL = 0x3e, + MAX8997_REG_LDO5CTRL = 0x3f, + MAX8997_REG_LDO6CTRL = 0x40, + MAX8997_REG_LDO7CTRL = 0x41, + MAX8997_REG_LDO8CTRL = 0x42, + MAX8997_REG_LDO9CTRL = 0x43, + MAX8997_REG_LDO10CTRL = 0x44, + MAX8997_REG_LDO11CTRL = 0x45, + MAX8997_REG_LDO12CTRL = 0x46, + MAX8997_REG_LDO13CTRL = 0x47, + MAX8997_REG_LDO14CTRL = 0x48, + MAX8997_REG_LDO15CTRL = 0x49, + MAX8997_REG_LDO16CTRL = 0x4a, + MAX8997_REG_LDO17CTRL = 0x4b, + MAX8997_REG_LDO18CTRL = 0x4c, + MAX8997_REG_LDO21CTRL = 0x4d, + + MAX8997_REG_MBCCTRL1 = 0x50, + MAX8997_REG_MBCCTRL2 = 0x51, + MAX8997_REG_MBCCTRL3 = 0x52, + MAX8997_REG_MBCCTRL4 = 0x53, + MAX8997_REG_MBCCTRL5 = 0x54, + MAX8997_REG_MBCCTRL6 = 0x55, + MAX8997_REG_OTPCGHCVS = 0x56, + + MAX8997_REG_SAFEOUTCTRL = 0x5a, + + MAX8997_REG_LBCNFG1 = 0x5e, + MAX8997_REG_LBCNFG2 = 0x5f, + MAX8997_REG_BBCCTRL = 0x60, + + MAX8997_REG_FLASH1_CUR = 0x63, /* 0x63 ~ 0x6e for FLASH */ + MAX8997_REG_FLASH2_CUR = 0x64, + MAX8997_REG_MOVIE_CUR = 0x65, + MAX8997_REG_GSMB_CUR = 0x66, + MAX8997_REG_BOOST_CNTL = 0x67, + MAX8997_REG_LEN_CNTL = 0x68, + MAX8997_REG_FLASH_CNTL = 0x69, + MAX8997_REG_WDT_CNTL = 0x6a, + MAX8997_REG_MAXFLASH1 = 0x6b, + MAX8997_REG_MAXFLASH2 = 0x6c, + MAX8997_REG_FLASHSTATUS = 0x6d, + MAX8997_REG_FLASHSTATUSMASK = 0x6e, + + MAX8997_REG_GPIOCNTL1 = 0x70, + MAX8997_REG_GPIOCNTL2 = 0x71, + MAX8997_REG_GPIOCNTL3 = 0x72, + MAX8997_REG_GPIOCNTL4 = 0x73, + MAX8997_REG_GPIOCNTL5 = 0x74, + MAX8997_REG_GPIOCNTL6 = 0x75, + MAX8997_REG_GPIOCNTL7 = 0x76, + MAX8997_REG_GPIOCNTL8 = 0x77, + MAX8997_REG_GPIOCNTL9 = 0x78, + MAX8997_REG_GPIOCNTL10 = 0x79, + MAX8997_REG_GPIOCNTL11 = 0x7a, + MAX8997_REG_GPIOCNTL12 = 0x7b, + + MAX8997_REG_LDO1CONFIG = 0x80, + MAX8997_REG_LDO2CONFIG = 0x81, + MAX8997_REG_LDO3CONFIG = 0x82, + MAX8997_REG_LDO4CONFIG = 0x83, + MAX8997_REG_LDO5CONFIG = 0x84, + MAX8997_REG_LDO6CONFIG = 0x85, + MAX8997_REG_LDO7CONFIG = 0x86, + MAX8997_REG_LDO8CONFIG = 0x87, + MAX8997_REG_LDO9CONFIG = 0x88, + MAX8997_REG_LDO10CONFIG = 0x89, + MAX8997_REG_LDO11CONFIG = 0x8a, + MAX8997_REG_LDO12CONFIG = 0x8b, + MAX8997_REG_LDO13CONFIG = 0x8c, + MAX8997_REG_LDO14CONFIG = 0x8d, + MAX8997_REG_LDO15CONFIG = 0x8e, + MAX8997_REG_LDO16CONFIG = 0x8f, + MAX8997_REG_LDO17CONFIG = 0x90, + MAX8997_REG_LDO18CONFIG = 0x91, + MAX8997_REG_LDO21CONFIG = 0x92, + + MAX8997_REG_DVSOKTIMER1 = 0x97, + MAX8997_REG_DVSOKTIMER2 = 0x98, + MAX8997_REG_DVSOKTIMER4 = 0x99, + MAX8997_REG_DVSOKTIMER5 = 0x9a, + + MAX8997_REG_PMIC_END = 0x9b, +}; + +enum max8997_muic_reg { + MAX8997_MUIC_REG_ID = 0x0, + MAX8997_MUIC_REG_INT1 = 0x1, + MAX8997_MUIC_REG_INT2 = 0x2, + MAX8997_MUIC_REG_INT3 = 0x3, + MAX8997_MUIC_REG_STATUS1 = 0x4, + MAX8997_MUIC_REG_STATUS2 = 0x5, + MAX8997_MUIC_REG_STATUS3 = 0x6, + MAX8997_MUIC_REG_INTMASK1 = 0x7, + MAX8997_MUIC_REG_INTMASK2 = 0x8, + MAX8997_MUIC_REG_INTMASK3 = 0x9, + MAX8997_MUIC_REG_CDETCTRL = 0xa, + + MAX8997_MUIC_REG_CONTROL1 = 0xc, + MAX8997_MUIC_REG_CONTROL2 = 0xd, + MAX8997_MUIC_REG_CONTROL3 = 0xe, + + MAX8997_MUIC_REG_END = 0xf, +}; + +enum max8997_haptic_reg { + MAX8997_HAPTIC_REG_GENERAL = 0x00, + MAX8997_HAPTIC_REG_CONF1 = 0x01, + MAX8997_HAPTIC_REG_CONF2 = 0x02, + MAX8997_HAPTIC_REG_DRVCONF = 0x03, + MAX8997_HAPTIC_REG_CYCLECONF1 = 0x04, + MAX8997_HAPTIC_REG_CYCLECONF2 = 0x05, + MAX8997_HAPTIC_REG_SIGCONF1 = 0x06, + MAX8997_HAPTIC_REG_SIGCONF2 = 0x07, + MAX8997_HAPTIC_REG_SIGCONF3 = 0x08, + MAX8997_HAPTIC_REG_SIGCONF4 = 0x09, + MAX8997_HAPTIC_REG_SIGDC1 = 0x0a, + MAX8997_HAPTIC_REG_SIGDC2 = 0x0b, + MAX8997_HAPTIC_REG_SIGPWMDC1 = 0x0c, + MAX8997_HAPTIC_REG_SIGPWMDC2 = 0x0d, + MAX8997_HAPTIC_REG_SIGPWMDC3 = 0x0e, + MAX8997_HAPTIC_REG_SIGPWMDC4 = 0x0f, + MAX8997_HAPTIC_REG_MTR_REV = 0x10, + + MAX8997_HAPTIC_REG_END = 0x11, +}; + +/* slave addr = 0x0c: using "2nd part" of rev4 datasheet */ +enum max8997_rtc_reg { + MAX8997_RTC_CTRLMASK = 0x02, + MAX8997_RTC_CTRL = 0x03, + MAX8997_RTC_UPDATE1 = 0x04, + MAX8997_RTC_UPDATE2 = 0x05, + MAX8997_RTC_WTSR_SMPL = 0x06, + + MAX8997_RTC_SEC = 0x10, + MAX8997_RTC_MIN = 0x11, + MAX8997_RTC_HOUR = 0x12, + MAX8997_RTC_DAY_OF_WEEK = 0x13, + MAX8997_RTC_MONTH = 0x14, + MAX8997_RTC_YEAR = 0x15, + MAX8997_RTC_DAY_OF_MONTH = 0x16, + MAX8997_RTC_ALARM1_SEC = 0x17, + MAX8997_RTC_ALARM1_MIN = 0x18, + MAX8997_RTC_ALARM1_HOUR = 0x19, + MAX8997_RTC_ALARM1_DAY_OF_WEEK = 0x1a, + MAX8997_RTC_ALARM1_MONTH = 0x1b, + MAX8997_RTC_ALARM1_YEAR = 0x1c, + MAX8997_RTC_ALARM1_DAY_OF_MONTH = 0x1d, + MAX8997_RTC_ALARM2_SEC = 0x1e, + MAX8997_RTC_ALARM2_MIN = 0x1f, + MAX8997_RTC_ALARM2_HOUR = 0x20, + MAX8997_RTC_ALARM2_DAY_OF_WEEK = 0x21, + MAX8997_RTC_ALARM2_MONTH = 0x22, + MAX8997_RTC_ALARM2_YEAR = 0x23, + MAX8997_RTC_ALARM2_DAY_OF_MONTH = 0x24, +}; + +enum max8997_irq_source { + PMIC_INT1 = 0, + PMIC_INT2, + PMIC_INT3, + PMIC_INT4, + + FUEL_GAUGE, /* Ignored (MAX17042 driver handles) */ + + MUIC_INT1, + MUIC_INT2, + MUIC_INT3, + + GPIO_LOW, /* Not implemented */ + GPIO_HI, /* Not implemented */ + + FLASH_STATUS, /* Not implemented */ + + MAX8997_IRQ_GROUP_NR, +}; + +enum max8997_irq { + MAX8997_PMICIRQ_PWRONR, + MAX8997_PMICIRQ_PWRONF, + MAX8997_PMICIRQ_PWRON1SEC, + MAX8997_PMICIRQ_JIGONR, + MAX8997_PMICIRQ_JIGONF, + MAX8997_PMICIRQ_LOWBAT2, + MAX8997_PMICIRQ_LOWBAT1, + + MAX8997_PMICIRQ_JIGR, + MAX8997_PMICIRQ_JIGF, + MAX8997_PMICIRQ_MR, + MAX8997_PMICIRQ_DVS1OK, + MAX8997_PMICIRQ_DVS2OK, + MAX8997_PMICIRQ_DVS3OK, + MAX8997_PMICIRQ_DVS4OK, + + MAX8997_PMICIRQ_CHGINS, + MAX8997_PMICIRQ_CHGRM, + MAX8997_PMICIRQ_DCINOVP, + MAX8997_PMICIRQ_TOPOFFR, + MAX8997_PMICIRQ_CHGRSTF, + MAX8997_PMICIRQ_MBCHGTMEXPD, + + MAX8997_PMICIRQ_RTC60S, + MAX8997_PMICIRQ_RTCA1, + MAX8997_PMICIRQ_RTCA2, + MAX8997_PMICIRQ_SMPL_INT, + MAX8997_PMICIRQ_RTC1S, + MAX8997_PMICIRQ_WTSR, + + MAX8997_MUICIRQ_ADCError, + MAX8997_MUICIRQ_ADCLow, + MAX8997_MUICIRQ_ADC, + + MAX8997_MUICIRQ_VBVolt, + MAX8997_MUICIRQ_DBChg, + MAX8997_MUICIRQ_DCDTmr, + MAX8997_MUICIRQ_ChgDetRun, + MAX8997_MUICIRQ_ChgTyp, + + MAX8997_MUICIRQ_OVP, + + MAX8997_IRQ_NR, +}; + +#define MAX8997_REG_BUCK1DVS(x) (MAX8997_REG_BUCK1DVS1 + (x) - 1) +#define MAX8997_REG_BUCK2DVS(x) (MAX8997_REG_BUCK2DVS1 + (x) - 1) +#define MAX8997_REG_BUCK5DVS(x) (MAX8997_REG_BUCK5DVS1 + (x) - 1) + +#define MAX8997_NUM_GPIO 12 +struct max8997_dev { + struct device *dev; + struct i2c_client *i2c; /* 0xcc / PMIC, Battery Control, and FLASH */ + struct i2c_client *rtc; /* slave addr 0x0c */ + struct i2c_client *haptic; /* slave addr 0x90 */ + struct i2c_client *muic; /* slave addr 0x4a */ + struct mutex iolock; + + int type; + struct platform_device *battery; /* battery control (not fuel gauge) */ + + int irq; + int ono; + int irq_base; + bool wakeup; + struct mutex irqlock; + int irq_masks_cur[MAX8997_IRQ_GROUP_NR]; + int irq_masks_cache[MAX8997_IRQ_GROUP_NR]; + + /* For hibernation */ + u8 reg_dump[MAX8997_REG_PMIC_END + MAX8997_MUIC_REG_END + + MAX8997_HAPTIC_REG_END]; + + bool gpio_status[MAX8997_NUM_GPIO]; +}; + +enum max8997_types { + TYPE_MAX8997, + TYPE_MAX8966, +}; + +extern int max8997_irq_init(struct max8997_dev *max8997); +extern void max8997_irq_exit(struct max8997_dev *max8997); +extern int max8997_irq_resume(struct max8997_dev *max8997); + +extern int max8997_read_reg(struct i2c_client *i2c, u8 reg, u8 *dest); +extern int max8997_bulk_read(struct i2c_client *i2c, u8 reg, int count, + u8 *buf); +extern int max8997_write_reg(struct i2c_client *i2c, u8 reg, u8 value); +extern int max8997_bulk_write(struct i2c_client *i2c, u8 reg, int count, + u8 *buf); +extern int max8997_update_reg(struct i2c_client *i2c, u8 reg, u8 val, u8 mask); + +#define MAX8997_GPIO_INT_BOTH (0x3 << 4) +#define MAX8997_GPIO_INT_RISE (0x2 << 4) +#define MAX8997_GPIO_INT_FALL (0x1 << 4) + +#define MAX8997_GPIO_INT_MASK (0x3 << 4) +#define MAX8997_GPIO_DATA_MASK (0x1 << 2) +#endif /* __LINUX_MFD_MAX8997_PRIV_H */ diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h new file mode 100644 index 00000000000..60931d08942 --- /dev/null +++ b/include/linux/mfd/max8997.h @@ -0,0 +1,117 @@ +/* + * max8997.h - Driver for the Maxim 8997/8966 + * + * Copyright (C) 2009-2010 Samsung Electrnoics + * MyungJoo Ham <myungjoo.ham@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * This driver is based on max8998.h + * + * MAX8997 has PMIC, MUIC, HAPTIC, RTC, FLASH, and Fuel Gauge devices. + * Except Fuel Gauge, every device shares the same I2C bus and included in + * this mfd driver. Although the fuel gauge is included in the chip, it is + * excluded from the driver because a) it has a different I2C bus from + * others and b) it can be enabled simply by using MAX17042 driver. + */ + +#ifndef __LINUX_MFD_MAX8998_H +#define __LINUX_MFD_MAX8998_H + +#include <linux/regulator/consumer.h> + +/* MAX8997/8966 regulator IDs */ +enum max8998_regulators { + MAX8997_LDO1 = 0, + MAX8997_LDO2, + MAX8997_LDO3, + MAX8997_LDO4, + MAX8997_LDO5, + MAX8997_LDO6, + MAX8997_LDO7, + MAX8997_LDO8, + MAX8997_LDO9, + MAX8997_LDO10, + MAX8997_LDO11, + MAX8997_LDO12, + MAX8997_LDO13, + MAX8997_LDO14, + MAX8997_LDO15, + MAX8997_LDO16, + MAX8997_LDO17, + MAX8997_LDO18, + MAX8997_LDO21, + MAX8997_BUCK1, + MAX8997_BUCK2, + MAX8997_BUCK3, + MAX8997_BUCK4, + MAX8997_BUCK5, + MAX8997_BUCK6, + MAX8997_BUCK7, + MAX8997_EN32KHZ_AP, + MAX8997_EN32KHZ_CP, + MAX8997_ENVICHG, + MAX8997_ESAFEOUT1, + MAX8997_ESAFEOUT2, + MAX8997_CHARGER_CV, /* control MBCCV of MBCCTRL3 */ + MAX8997_CHARGER, /* charger current, MBCCTRL4 */ + MAX8997_CHARGER_TOPOFF, /* MBCCTRL5 */ + + MAX8997_REG_MAX, +}; + +struct max8997_regulator_data { + int id; + struct regulator_init_data *initdata; +}; + +struct max8997_platform_data { + /* IRQ */ + int irq_base; + int ono; + int wakeup; + + /* ---- PMIC ---- */ + struct max8997_regulator_data *regulators; + int num_regulators; + + /* + * SET1~3 DVS GPIOs control Buck1, 2, and 5 simultaneously. Therefore, + * With buckx_gpiodvs enabled, the buckx cannot be controlled + * independently. To control buckx (of 1, 2, and 5) independently, + * disable buckx_gpiodvs and control with BUCKxDVS1 register. + * + * When buckx_gpiodvs and bucky_gpiodvs are both enabled, set_voltage + * on buckx will change the voltage of bucky at the same time. + * + */ + bool ignore_gpiodvs_side_effect; + int buck125_gpios[3]; /* GPIO of [0]SET1, [1]SET2, [2]SET3 */ + int buck125_default_idx; /* Default value of SET1, 2, 3 */ + unsigned int buck1_voltage[8]; /* buckx_voltage in uV */ + bool buck1_gpiodvs; + unsigned int buck2_voltage[8]; + bool buck2_gpiodvs; + unsigned int buck5_voltage[8]; + bool buck5_gpiodvs; + + /* MUIC: Not implemented */ + /* HAPTIC: Not implemented */ + /* RTC: Not implemented */ + /* Flash: Not implemented */ + /* Charger control: Not implemented */ +}; + +#endif /* __LINUX_MFD_MAX8998_H */ diff --git a/include/linux/mfd/mc13xxx.h b/include/linux/mfd/mc13xxx.h index a1d391b40e6..c064beaaccb 100644 --- a/include/linux/mfd/mc13xxx.h +++ b/include/linux/mfd/mc13xxx.h @@ -146,8 +146,7 @@ struct mc13xxx_platform_data { #define MC13XXX_USE_LED (1 << 5) unsigned int flags; - int num_regulators; - struct mc13xxx_regulator_init_data *regulators; + struct mc13xxx_regulator_platform_data regulators; struct mc13xxx_leds_platform_data *leds; }; diff --git a/include/linux/mfd/sh_mobile_sdhi.h b/include/linux/mfd/sh_mobile_sdhi.h deleted file mode 100644 index c981b959760..00000000000 --- a/include/linux/mfd/sh_mobile_sdhi.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef __SH_MOBILE_SDHI_H__ -#define __SH_MOBILE_SDHI_H__ - -#include <linux/types.h> - -struct sh_mobile_sdhi_info { - int dma_slave_tx; - int dma_slave_rx; - unsigned long tmio_flags; - unsigned long tmio_caps; - u32 tmio_ocr_mask; /* available MMC voltages */ - void (*set_pwr)(struct platform_device *pdev, int state); - int (*get_cd)(struct platform_device *pdev); -}; - -#endif /* __SH_MOBILE_SDHI_H__ */ diff --git a/include/linux/mfd/ti_ssp.h b/include/linux/mfd/ti_ssp.h new file mode 100644 index 00000000000..dbb4b43bd20 --- /dev/null +++ b/include/linux/mfd/ti_ssp.h @@ -0,0 +1,93 @@ +/* + * Sequencer Serial Port (SSP) driver for Texas Instruments' SoCs + * + * Copyright (C) 2010 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __TI_SSP_H__ +#define __TI_SSP_H__ + +struct ti_ssp_dev_data { + const char *dev_name; + void *pdata; + size_t pdata_size; +}; + +struct ti_ssp_data { + unsigned long out_clock; + struct ti_ssp_dev_data dev_data[2]; +}; + +struct ti_ssp_spi_data { + unsigned long iosel; + int num_cs; + void (*select)(int cs); +}; + +/* + * Sequencer port IO pin configuration bits. These do not correlate 1-1 with + * the hardware. The iosel field in the port data combines iosel1 and iosel2, + * and is therefore not a direct map to register space. It is best to use the + * macros below to construct iosel values. + * + * least significant 16 bits --> iosel1 + * most significant 16 bits --> iosel2 + */ + +#define SSP_IN 0x0000 +#define SSP_DATA 0x0001 +#define SSP_CLOCK 0x0002 +#define SSP_CHIPSEL 0x0003 +#define SSP_OUT 0x0004 +#define SSP_PIN_SEL(pin, v) ((v) << ((pin) * 3)) +#define SSP_PIN_MASK(pin) SSP_PIN_SEL(pin, 0x7) +#define SSP_INPUT_SEL(pin) ((pin) << 16) + +/* Sequencer port config bits */ +#define SSP_EARLY_DIN BIT(8) +#define SSP_DELAY_DOUT BIT(9) + +/* Sequence map definitions */ +#define SSP_CLK_HIGH BIT(0) +#define SSP_CLK_LOW 0 +#define SSP_DATA_HIGH BIT(1) +#define SSP_DATA_LOW 0 +#define SSP_CS_HIGH BIT(2) +#define SSP_CS_LOW 0 +#define SSP_OUT_MODE BIT(3) +#define SSP_IN_MODE 0 +#define SSP_DATA_REG BIT(4) +#define SSP_ADDR_REG 0 + +#define SSP_OPCODE_DIRECT ((0x0) << 5) +#define SSP_OPCODE_TOGGLE ((0x1) << 5) +#define SSP_OPCODE_SHIFT ((0x2) << 5) +#define SSP_OPCODE_BRANCH0 ((0x4) << 5) +#define SSP_OPCODE_BRANCH1 ((0x5) << 5) +#define SSP_OPCODE_BRANCH ((0x6) << 5) +#define SSP_OPCODE_STOP ((0x7) << 5) +#define SSP_BRANCH(addr) ((addr) << 8) +#define SSP_COUNT(cycles) ((cycles) << 8) + +int ti_ssp_raw_read(struct device *dev); +int ti_ssp_raw_write(struct device *dev, u32 val); +int ti_ssp_load(struct device *dev, int offs, u32* prog, int len); +int ti_ssp_run(struct device *dev, u32 pc, u32 input, u32 *output); +int ti_ssp_set_mode(struct device *dev, int mode); +int ti_ssp_set_iosel(struct device *dev, u32 iosel); + +#endif /* __TI_SSP_H__ */ diff --git a/include/linux/mfd/tps6105x.h b/include/linux/mfd/tps6105x.h new file mode 100644 index 00000000000..386743dd931 --- /dev/null +++ b/include/linux/mfd/tps6105x.h @@ -0,0 +1,101 @@ +/* + * Copyright (C) 2011 ST-Ericsson SA + * Written on behalf of Linaro for ST-Ericsson + * + * Author: Linus Walleij <linus.walleij@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ +#ifndef MFD_TPS6105X_H +#define MFD_TPS6105X_H + +#include <linux/i2c.h> +#include <linux/regulator/machine.h> + +/* + * Register definitions to all subdrivers + */ +#define TPS6105X_REG_0 0x00 +#define TPS6105X_REG0_MODE_SHIFT 6 +#define TPS6105X_REG0_MODE_MASK (0x03<<6) +/* These defines for both reg0 and reg1 */ +#define TPS6105X_REG0_MODE_SHUTDOWN 0x00 +#define TPS6105X_REG0_MODE_TORCH 0x01 +#define TPS6105X_REG0_MODE_TORCH_FLASH 0x02 +#define TPS6105X_REG0_MODE_VOLTAGE 0x03 +#define TPS6105X_REG0_VOLTAGE_SHIFT 4 +#define TPS6105X_REG0_VOLTAGE_MASK (3<<4) +#define TPS6105X_REG0_VOLTAGE_450 0 +#define TPS6105X_REG0_VOLTAGE_500 1 +#define TPS6105X_REG0_VOLTAGE_525 2 +#define TPS6105X_REG0_VOLTAGE_500_2 3 +#define TPS6105X_REG0_DIMMING_SHIFT 3 +#define TPS6105X_REG0_TORCHC_SHIFT 0 +#define TPS6105X_REG0_TORCHC_MASK (7<<0) +#define TPS6105X_REG0_TORCHC_0 0x00 +#define TPS6105X_REG0_TORCHC_50 0x01 +#define TPS6105X_REG0_TORCHC_75 0x02 +#define TPS6105X_REG0_TORCHC_100 0x03 +#define TPS6105X_REG0_TORCHC_150 0x04 +#define TPS6105X_REG0_TORCHC_200 0x05 +#define TPS6105X_REG0_TORCHC_250_400 0x06 +#define TPS6105X_REG0_TORCHC_250_500 0x07 +#define TPS6105X_REG_1 0x01 +#define TPS6105X_REG1_MODE_SHIFT 6 +#define TPS6105X_REG1_MODE_MASK (0x03<<6) +#define TPS6105X_REG1_MODE_SHUTDOWN 0x00 +#define TPS6105X_REG1_MODE_TORCH 0x01 +#define TPS6105X_REG1_MODE_TORCH_FLASH 0x02 +#define TPS6105X_REG1_MODE_VOLTAGE 0x03 +#define TPS6105X_REG_2 0x02 +#define TPS6105X_REG_3 0x03 + +/** + * enum tps6105x_mode - desired mode for the TPS6105x + * @TPS6105X_MODE_SHUTDOWN: this instance is inactive, not used for anything + * @TPS61905X_MODE_TORCH: this instance is used as a LED, usually a while + * LED, for example as backlight or flashlight. If this is set, the + * TPS6105X will register to the LED framework + * @TPS6105X_MODE_TORCH_FLASH: this instance is used as a flashgun, usually + * in a camera + * @TPS6105X_MODE_VOLTAGE: this instance is used as a voltage regulator and + * will register to the regulator framework + */ +enum tps6105x_mode { + TPS6105X_MODE_SHUTDOWN, + TPS6105X_MODE_TORCH, + TPS6105X_MODE_TORCH_FLASH, + TPS6105X_MODE_VOLTAGE, +}; + +/** + * struct tps6105x_platform_data - TPS61905x platform data + * @mode: what mode this instance shall be operated in, + * this is not selectable at runtime + * @regulator_data: initialization data for the voltage + * regulator if used as a voltage source + */ +struct tps6105x_platform_data { + enum tps6105x_mode mode; + struct regulator_init_data *regulator_data; +}; + +/** + * struct tps6105x - state holder for the TPS6105x drivers + * @mutex: mutex to serialize I2C accesses + * @i2c_client: corresponding I2C client + * @regulator: regulator device if used in voltage mode + */ +struct tps6105x { + struct tps6105x_platform_data *pdata; + struct mutex lock; + struct i2c_client *client; + struct regulator_dev *regulator; +}; + +extern int tps6105x_set(struct tps6105x *tps6105x, u8 reg, u8 value); +extern int tps6105x_get(struct tps6105x *tps6105x, u8 reg, u8 *buf); +extern int tps6105x_mask_and_set(struct tps6105x *tps6105x, u8 reg, + u8 bitmask, u8 bitvalues); + +#endif diff --git a/include/linux/mfd/wl1273-core.h b/include/linux/mfd/wl1273-core.h index 9787293eae5..db2f3f454a1 100644 --- a/include/linux/mfd/wl1273-core.h +++ b/include/linux/mfd/wl1273-core.h @@ -280,7 +280,9 @@ struct wl1273_core { struct i2c_client *client; + int (*read)(struct wl1273_core *core, u8, u16 *); int (*write)(struct wl1273_core *core, u8, u16); + int (*write_data)(struct wl1273_core *core, u8 *, u16); int (*set_audio)(struct wl1273_core *core, unsigned int); int (*set_volume)(struct wl1273_core *core, unsigned int); }; diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h index fd322aca33b..afe4db49402 100644 --- a/include/linux/mfd/wm831x/pdata.h +++ b/include/linux/mfd/wm831x/pdata.h @@ -80,7 +80,8 @@ struct wm831x_touch_pdata { int isel; /** Current for pen down (uA) */ int rpu; /** Pen down sensitivity resistor divider */ int pressure; /** Report pressure (boolean) */ - int data_irq; /** Touch data ready IRQ */ + unsigned int data_irq; /** Touch data ready IRQ */ + unsigned int pd_irq; /** Touch pendown detect IRQ */ }; enum wm831x_watchdog_action { @@ -103,11 +104,17 @@ struct wm831x_watchdog_pdata { #define WM831X_MAX_ISINK 2 struct wm831x_pdata { + /** Used to distinguish multiple WM831x chips */ + int wm831x_num; + /** Called before subdevices are set up */ int (*pre_init)(struct wm831x *wm831x); /** Called after subdevices are set up */ int (*post_init)(struct wm831x *wm831x); + /** Put the /IRQ line into CMOS mode */ + bool irq_cmos; + int irq_base; int gpio_base; struct wm831x_backlight_pdata *backlight; diff --git a/include/linux/mfd/wm8994/core.h b/include/linux/mfd/wm8994/core.h index 3fd36845ca4..f0b69cdae41 100644 --- a/include/linux/mfd/wm8994/core.h +++ b/include/linux/mfd/wm8994/core.h @@ -59,7 +59,7 @@ struct wm8994 { int (*read_dev)(struct wm8994 *wm8994, unsigned short reg, int bytes, void *dest); int (*write_dev)(struct wm8994 *wm8994, unsigned short reg, - int bytes, void *src); + int bytes, const void *src); void *control_data; @@ -71,6 +71,7 @@ struct wm8994 { u16 irq_masks_cache[WM8994_NUM_IRQ_REGS]; /* Used over suspend/resume */ + bool suspended; u16 ldo_regs[WM8994_NUM_LDO_REGS]; u16 gpio_regs[WM8994_NUM_GPIO_REGS]; @@ -87,6 +88,8 @@ int wm8994_set_bits(struct wm8994 *wm8994, unsigned short reg, unsigned short mask, unsigned short val); int wm8994_bulk_read(struct wm8994 *wm8994, unsigned short reg, int count, u16 *buf); +int wm8994_bulk_write(struct wm8994 *wm8994, unsigned short reg, + int count, const u16 *buf); /* Helper to save on boilerplate */ |