diff options
Diffstat (limited to 'include/linux/mfd')
| -rw-r--r-- | include/linux/mfd/88pm860x.h | 7 | ||||
| -rw-r--r-- | include/linux/mfd/ab4500.h | 262 | ||||
| -rw-r--r-- | include/linux/mfd/ab8500.h | 128 | ||||
| -rw-r--r-- | include/linux/mfd/abx500.h (renamed from include/linux/mfd/ab3100.h) | 134 | ||||
| -rw-r--r-- | include/linux/mfd/janz.h | 54 | ||||
| -rw-r--r-- | include/linux/mfd/mc13783.h | 66 | ||||
| -rw-r--r-- | include/linux/mfd/pcf50633/backlight.h | 51 | ||||
| -rw-r--r-- | include/linux/mfd/pcf50633/core.h | 4 | ||||
| -rw-r--r-- | include/linux/mfd/rdc321x.h | 26 | ||||
| -rw-r--r-- | include/linux/mfd/sh_mobile_sdhi.h | 6 | ||||
| -rw-r--r-- | include/linux/mfd/tc35892.h | 132 | ||||
| -rw-r--r-- | include/linux/mfd/tmio.h | 11 | ||||
| -rw-r--r-- | include/linux/mfd/tps6507x.h | 169 | ||||
| -rw-r--r-- | include/linux/mfd/wm831x/core.h | 5 |
14 files changed, 773 insertions, 282 deletions
diff --git a/include/linux/mfd/88pm860x.h b/include/linux/mfd/88pm860x.h index 73f92c5feea..bfd23bef736 100644 --- a/include/linux/mfd/88pm860x.h +++ b/include/linux/mfd/88pm860x.h @@ -132,6 +132,7 @@ enum { PM8607_ID_LDO9, PM8607_ID_LDO10, PM8607_ID_LDO12, + PM8607_ID_LDO13, PM8607_ID_LDO14, PM8607_ID_RG_MAX, @@ -309,7 +310,7 @@ struct pm860x_chip { }; -#define PM8607_MAX_REGULATOR 15 /* 3 Bucks, 12 LDOs */ +#define PM8607_MAX_REGULATOR PM8607_ID_RG_MAX /* 3 Bucks, 13 LDOs */ enum { GI2C_PORT = 0, @@ -369,7 +370,7 @@ extern int pm860x_set_bits(struct i2c_client *, int, unsigned char, unsigned char); extern int pm860x_device_init(struct pm860x_chip *chip, - struct pm860x_platform_data *pdata); -extern void pm860x_device_exit(struct pm860x_chip *chip); + struct pm860x_platform_data *pdata) __devinit ; +extern void pm860x_device_exit(struct pm860x_chip *chip) __devexit ; #endif /* __LINUX_MFD_88PM860X_H */ diff --git a/include/linux/mfd/ab4500.h b/include/linux/mfd/ab4500.h deleted file mode 100644 index a42a7033ae5..00000000000 --- a/include/linux/mfd/ab4500.h +++ /dev/null @@ -1,262 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson - * - * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2, as - * published by the Free Software Foundation. - * - * AB4500 device core funtions, for client access - */ -#ifndef MFD_AB4500_H -#define MFD_AB4500_H - -#include <linux/device.h> - -/* - * AB4500 bank addresses - */ -#define AB4500_SYS_CTRL1_BLOCK 0x1 -#define AB4500_SYS_CTRL2_BLOCK 0x2 -#define AB4500_REGU_CTRL1 0x3 -#define AB4500_REGU_CTRL2 0x4 -#define AB4500_USB 0x5 -#define AB4500_TVOUT 0x6 -#define AB4500_DBI 0x7 -#define AB4500_ECI_AV_ACC 0x8 -#define AB4500_RESERVED 0x9 -#define AB4500_GPADC 0xA -#define AB4500_CHARGER 0xB -#define AB4500_GAS_GAUGE 0xC -#define AB4500_AUDIO 0xD -#define AB4500_INTERRUPT 0xE -#define AB4500_RTC 0xF -#define AB4500_MISC 0x10 -#define AB4500_DEBUG 0x12 -#define AB4500_PROD_TEST 0x13 -#define AB4500_OTP_EMUL 0x15 - -/* - * System control 1 register offsets. - * Bank = 0x01 - */ -#define AB4500_TURNON_STAT_REG 0x0100 -#define AB4500_RESET_STAT_REG 0x0101 -#define AB4500_PONKEY1_PRESS_STAT_REG 0x0102 - -#define AB4500_FSM_STAT1_REG 0x0140 -#define AB4500_FSM_STAT2_REG 0x0141 -#define AB4500_SYSCLK_REQ_STAT_REG 0x0142 -#define AB4500_USB_STAT1_REG 0x0143 -#define AB4500_USB_STAT2_REG 0x0144 -#define AB4500_STATUS_SPARE1_REG 0x0145 -#define AB4500_STATUS_SPARE2_REG 0x0146 - -#define AB4500_CTRL1_REG 0x0180 -#define AB4500_CTRL2_REG 0x0181 - -/* - * System control 2 register offsets. - * bank = 0x02 - */ -#define AB4500_CTRL3_REG 0x0200 -#define AB4500_MAIN_WDOG_CTRL_REG 0x0201 -#define AB4500_MAIN_WDOG_TIMER_REG 0x0202 -#define AB4500_LOW_BAT_REG 0x0203 -#define AB4500_BATT_OK_REG 0x0204 -#define AB4500_SYSCLK_TIMER_REG 0x0205 -#define AB4500_SMPSCLK_CTRL_REG 0x0206 -#define AB4500_SMPSCLK_SEL1_REG 0x0207 -#define AB4500_SMPSCLK_SEL2_REG 0x0208 -#define AB4500_SMPSCLK_SEL3_REG 0x0209 -#define AB4500_SYSULPCLK_CONF_REG 0x020A -#define AB4500_SYSULPCLK_CTRL1_REG 0x020B -#define AB4500_SYSCLK_CTRL_REG 0x020C -#define AB4500_SYSCLK_REQ1_VALID_REG 0x020D -#define AB4500_SYSCLK_REQ_VALID_REG 0x020E -#define AB4500_SYSCTRL_SPARE_REG 0x020F -#define AB4500_PAD_CONF_REG 0x0210 - -/* - * Regu control1 register offsets - * Bank = 0x03 - */ -#define AB4500_REGU_SERIAL_CTRL1_REG 0x0300 -#define AB4500_REGU_SERIAL_CTRL2_REG 0x0301 -#define AB4500_REGU_SERIAL_CTRL3_REG 0x0302 -#define AB4500_REGU_REQ_CTRL1_REG 0x0303 -#define AB4500_REGU_REQ_CTRL2_REG 0x0304 -#define AB4500_REGU_REQ_CTRL3_REG 0x0305 -#define AB4500_REGU_REQ_CTRL4_REG 0x0306 -#define AB4500_REGU_MISC1_REG 0x0380 -#define AB4500_REGU_OTGSUPPLY_CTRL_REG 0x0381 -#define AB4500_REGU_VUSB_CTRL_REG 0x0382 -#define AB4500_REGU_VAUDIO_SUPPLY_REG 0x0383 -#define AB4500_REGU_CTRL1_SPARE_REG 0x0384 - -/* - * Regu control2 Vmod register offsets - */ -#define AB4500_REGU_VMOD_REGU_REG 0x0440 -#define AB4500_REGU_VMOD_SEL1_REG 0x0441 -#define AB4500_REGU_VMOD_SEL2_REG 0x0442 -#define AB4500_REGU_CTRL_DISCH_REG 0x0443 -#define AB4500_REGU_CTRL_DISCH2_REG 0x0444 - -/* - * USB/ULPI register offsets - * Bank : 0x5 - */ -#define AB4500_USB_LINE_STAT_REG 0x0580 -#define AB4500_USB_LINE_CTRL1_REG 0x0581 -#define AB4500_USB_LINE_CTRL2_REG 0x0582 -#define AB4500_USB_LINE_CTRL3_REG 0x0583 -#define AB4500_USB_LINE_CTRL4_REG 0x0584 -#define AB4500_USB_LINE_CTRL5_REG 0x0585 -#define AB4500_USB_OTG_CTRL_REG 0x0587 -#define AB4500_USB_OTG_STAT_REG 0x0588 -#define AB4500_USB_OTG_STAT_REG 0x0588 -#define AB4500_USB_CTRL_SPARE_REG 0x0589 -#define AB4500_USB_PHY_CTRL_REG 0x058A - -/* - * TVOUT / CTRL register offsets - * Bank : 0x06 - */ -#define AB4500_TVOUT_CTRL_REG 0x0680 - -/* - * DBI register offsets - * Bank : 0x07 - */ -#define AB4500_DBI_REG1_REG 0x0700 -#define AB4500_DBI_REG2_REG 0x0701 - -/* - * ECI regsiter offsets - * Bank : 0x08 - */ -#define AB4500_ECI_CTRL_REG 0x0800 -#define AB4500_ECI_HOOKLEVEL_REG 0x0801 -#define AB4500_ECI_DATAOUT_REG 0x0802 -#define AB4500_ECI_DATAIN_REG 0x0803 - -/* - * AV Connector register offsets - * Bank : 0x08 - */ -#define AB4500_AV_CONN_REG 0x0840 - -/* - * Accessory detection register offsets - * Bank : 0x08 - */ -#define AB4500_ACC_DET_DB1_REG 0x0880 -#define AB4500_ACC_DET_DB2_REG 0x0881 - -/* - * GPADC register offsets - * Bank : 0x0A - */ -#define AB4500_GPADC_CTRL1_REG 0x0A00 -#define AB4500_GPADC_CTRL2_REG 0x0A01 -#define AB4500_GPADC_CTRL3_REG 0x0A02 -#define AB4500_GPADC_AUTO_TIMER_REG 0x0A03 -#define AB4500_GPADC_STAT_REG 0x0A04 -#define AB4500_GPADC_MANDATAL_REG 0x0A05 -#define AB4500_GPADC_MANDATAH_REG 0x0A06 -#define AB4500_GPADC_AUTODATAL_REG 0x0A07 -#define AB4500_GPADC_AUTODATAH_REG 0x0A08 -#define AB4500_GPADC_MUX_CTRL_REG 0x0A09 - -/* - * Charger / status register offfsets - * Bank : 0x0B - */ -#define AB4500_CH_STATUS1_REG 0x0B00 -#define AB4500_CH_STATUS2_REG 0x0B01 -#define AB4500_CH_USBCH_STAT1_REG 0x0B02 -#define AB4500_CH_USBCH_STAT2_REG 0x0B03 -#define AB4500_CH_FSM_STAT_REG 0x0B04 -#define AB4500_CH_STAT_REG 0x0B05 - -/* - * Charger / control register offfsets - * Bank : 0x0B - */ -#define AB4500_CH_VOLT_LVL_REG 0x0B40 - -/* - * Charger / main control register offfsets - * Bank : 0x0B - */ -#define AB4500_MCH_CTRL1 0x0B80 -#define AB4500_MCH_CTRL2 0x0B81 -#define AB4500_MCH_IPT_CURLVL_REG 0x0B82 -#define AB4500_CH_WD_REG 0x0B83 - -/* - * Charger / USB control register offsets - * Bank : 0x0B - */ -#define AB4500_USBCH_CTRL1_REG 0x0BC0 -#define AB4500_USBCH_CTRL2_REG 0x0BC1 -#define AB4500_USBCH_IPT_CRNTLVL_REG 0x0BC2 - -/* - * RTC bank register offsets - * Bank : 0xF - */ -#define AB4500_RTC_SOFF_STAT_REG 0x0F00 -#define AB4500_RTC_CC_CONF_REG 0x0F01 -#define AB4500_RTC_READ_REQ_REG 0x0F02 -#define AB4500_RTC_WATCH_TSECMID_REG 0x0F03 -#define AB4500_RTC_WATCH_TSECHI_REG 0x0F04 -#define AB4500_RTC_WATCH_TMIN_LOW_REG 0x0F05 -#define AB4500_RTC_WATCH_TMIN_MID_REG 0x0F06 -#define AB4500_RTC_WATCH_TMIN_HI_REG 0x0F07 -#define AB4500_RTC_ALRM_MIN_LOW_REG 0x0F08 -#define AB4500_RTC_ALRM_MIN_MID_REG 0x0F09 -#define AB4500_RTC_ALRM_MIN_HI_REG 0x0F0A -#define AB4500_RTC_STAT_REG 0x0F0B -#define AB4500_RTC_BKUP_CHG_REG 0x0F0C -#define AB4500_RTC_FORCE_BKUP_REG 0x0F0D -#define AB4500_RTC_CALIB_REG 0x0F0E -#define AB4500_RTC_SWITCH_STAT_REG 0x0F0F - -/* - * PWM Out generators - * Bank: 0x10 - */ -#define AB4500_PWM_OUT_CTRL1_REG 0x1060 -#define AB4500_PWM_OUT_CTRL2_REG 0x1061 -#define AB4500_PWM_OUT_CTRL3_REG 0x1062 -#define AB4500_PWM_OUT_CTRL4_REG 0x1063 -#define AB4500_PWM_OUT_CTRL5_REG 0x1064 -#define AB4500_PWM_OUT_CTRL6_REG 0x1065 -#define AB4500_PWM_OUT_CTRL7_REG 0x1066 - -#define AB4500_I2C_PAD_CTRL_REG 0x1067 -#define AB4500_REV_REG 0x1080 - -/** - * struct ab4500 - * @spi: spi device structure - * @tx_buf: transmit buffer - * @rx_buf: receive buffer - * @lock: sync primitive - */ -struct ab4500 { - struct spi_device *spi; - unsigned long tx_buf[4]; - unsigned long rx_buf[4]; - struct mutex lock; -}; - -int ab4500_write(struct ab4500 *ab4500, unsigned char block, - unsigned long addr, unsigned char data); -int ab4500_read(struct ab4500 *ab4500, unsigned char block, - unsigned long addr); - -#endif /* MFD_AB4500_H */ diff --git a/include/linux/mfd/ab8500.h b/include/linux/mfd/ab8500.h new file mode 100644 index 00000000000..b63ff3ba335 --- /dev/null +++ b/include/linux/mfd/ab8500.h @@ -0,0 +1,128 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> + */ +#ifndef MFD_AB8500_H +#define MFD_AB8500_H + +#include <linux/device.h> + +/* + * Interrupts + */ + +#define AB8500_INT_MAIN_EXT_CH_NOT_OK 0 +#define AB8500_INT_UN_PLUG_TV_DET 1 +#define AB8500_INT_PLUG_TV_DET 2 +#define AB8500_INT_TEMP_WARM 3 +#define AB8500_INT_PON_KEY2DB_F 4 +#define AB8500_INT_PON_KEY2DB_R 5 +#define AB8500_INT_PON_KEY1DB_F 6 +#define AB8500_INT_PON_KEY1DB_R 7 +#define AB8500_INT_BATT_OVV 8 +#define AB8500_INT_MAIN_CH_UNPLUG_DET 10 +#define AB8500_INT_MAIN_CH_PLUG_DET 11 +#define AB8500_INT_USB_ID_DET_F 12 +#define AB8500_INT_USB_ID_DET_R 13 +#define AB8500_INT_VBUS_DET_F 14 +#define AB8500_INT_VBUS_DET_R 15 +#define AB8500_INT_VBUS_CH_DROP_END 16 +#define AB8500_INT_RTC_60S 17 +#define AB8500_INT_RTC_ALARM 18 +#define AB8500_INT_BAT_CTRL_INDB 20 +#define AB8500_INT_CH_WD_EXP 21 +#define AB8500_INT_VBUS_OVV 22 +#define AB8500_INT_MAIN_CH_DROP_END 23 +#define AB8500_INT_CCN_CONV_ACC 24 +#define AB8500_INT_INT_AUD 25 +#define AB8500_INT_CCEOC 26 +#define AB8500_INT_CC_INT_CALIB 27 +#define AB8500_INT_LOW_BAT_F 28 +#define AB8500_INT_LOW_BAT_R 29 +#define AB8500_INT_BUP_CHG_NOT_OK 30 +#define AB8500_INT_BUP_CHG_OK 31 +#define AB8500_INT_GP_HW_ADC_CONV_END 32 +#define AB8500_INT_ACC_DETECT_1DB_F 33 +#define AB8500_INT_ACC_DETECT_1DB_R 34 +#define AB8500_INT_ACC_DETECT_22DB_F 35 +#define AB8500_INT_ACC_DETECT_22DB_R 36 +#define AB8500_INT_ACC_DETECT_21DB_F 37 +#define AB8500_INT_ACC_DETECT_21DB_R 38 +#define AB8500_INT_GP_SW_ADC_CONV_END 39 +#define AB8500_INT_BTEMP_LOW 72 +#define AB8500_INT_BTEMP_LOW_MEDIUM 73 +#define AB8500_INT_BTEMP_MEDIUM_HIGH 74 +#define AB8500_INT_BTEMP_HIGH 75 +#define AB8500_INT_USB_CHARGER_NOT_OK 81 +#define AB8500_INT_ID_WAKEUP_R 82 +#define AB8500_INT_ID_DET_R1R 84 +#define AB8500_INT_ID_DET_R2R 85 +#define AB8500_INT_ID_DET_R3R 86 +#define AB8500_INT_ID_DET_R4R 87 +#define AB8500_INT_ID_WAKEUP_F 88 +#define AB8500_INT_ID_DET_R1F 90 +#define AB8500_INT_ID_DET_R2F 91 +#define AB8500_INT_ID_DET_R3F 92 +#define AB8500_INT_ID_DET_R4F 93 +#define AB8500_INT_USB_CHG_DET_DONE 94 +#define AB8500_INT_USB_CH_TH_PROT_F 96 +#define AB8500_INT_USB_CH_TH_PROP_R 97 +#define AB8500_INT_MAIN_CH_TH_PROP_F 98 +#define AB8500_INT_MAIN_CH_TH_PROT_R 99 +#define AB8500_INT_USB_CHARGER_NOT_OKF 103 + +#define AB8500_NR_IRQS 104 +#define AB8500_NUM_IRQ_REGS 13 + +/** + * struct ab8500 - ab8500 internal structure + * @dev: parent device + * @lock: read/write operations lock + * @irq_lock: genirq bus lock + * @revision: chip revision + * @irq: irq line + * @write: register write + * @read: register read + * @rx_buf: rx buf for SPI + * @tx_buf: tx buf for SPI + * @mask: cache of IRQ regs for bus lock + * @oldmask: cache of previous IRQ regs for bus lock + */ +struct ab8500 { + struct device *dev; + struct mutex lock; + struct mutex irq_lock; + int revision; + int irq_base; + int irq; + + int (*write) (struct ab8500 *a8500, u16 addr, u8 data); + int (*read) (struct ab8500 *a8500, u16 addr); + + unsigned long tx_buf[4]; + unsigned long rx_buf[4]; + + u8 mask[AB8500_NUM_IRQ_REGS]; + u8 oldmask[AB8500_NUM_IRQ_REGS]; +}; + +/** + * struct ab8500_platform_data - AB8500 platform data + * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used + * @init: board-specific initialization after detection of ab8500 + */ +struct ab8500_platform_data { + int irq_base; + void (*init) (struct ab8500 *); +}; + +extern int ab8500_write(struct ab8500 *a8500, u16 addr, u8 data); +extern int ab8500_read(struct ab8500 *a8500, u16 addr); +extern int ab8500_set_bits(struct ab8500 *a8500, u16 addr, u8 mask, u8 data); + +extern int __devinit ab8500_init(struct ab8500 *ab8500); +extern int __devexit ab8500_exit(struct ab8500 *ab8500); + +#endif /* MFD_AB8500_H */ diff --git a/include/linux/mfd/ab3100.h b/include/linux/mfd/abx500.h index 9a881c305a5..390726fcbcb 100644 --- a/include/linux/mfd/ab3100.h +++ b/include/linux/mfd/abx500.h @@ -3,17 +3,37 @@ * License terms: GNU General Public License (GPL) version 2 * AB3100 core access functions * Author: Linus Walleij <linus.walleij@stericsson.com> + * + * ABX500 core access functions. + * The abx500 interface is used for the Analog Baseband chip + * ab3100, ab3550, ab5500 and possibly comming. It is not used for + * ab4500 and ab8500 since they are another family of chip. + * + * Author: Mattias Wallin <mattias.wallin@stericsson.com> + * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com> + * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com> + * Author: Rickard Andersson <rickard.andersson@stericsson.com> */ #include <linux/device.h> #include <linux/regulator/machine.h> -#ifndef MFD_AB3100_H -#define MFD_AB3100_H +#ifndef MFD_ABX500_H +#define MFD_ABX500_H -#define ABUNKNOWN 0 -#define AB3000 1 -#define AB3100 2 +#define AB3100_P1A 0xc0 +#define AB3100_P1B 0xc1 +#define AB3100_P1C 0xc2 +#define AB3100_P1D 0xc3 +#define AB3100_P1E 0xc4 +#define AB3100_P1F 0xc5 +#define AB3100_P1G 0xc6 +#define AB3100_R2A 0xc7 +#define AB3100_R2B 0xc8 +#define AB3550_P1A 0x10 +#define AB5500_1_0 0x20 +#define AB5500_2_0 0x21 +#define AB5500_2_1 0x22 /* * AB3100, EVENTA1, A2 and A3 event register flags @@ -89,7 +109,7 @@ struct ab3100 { char chip_name[32]; u8 chip_id; struct blocking_notifier_head event_subscribers; - u32 startup_events; + u8 startup_events[3]; bool startup_events_read; }; @@ -112,18 +132,102 @@ struct ab3100_platform_data { int external_voltage; }; -int ab3100_set_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 regval); -int ab3100_get_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 *regval); -int ab3100_get_register_page_interruptible(struct ab3100 *ab3100, - u8 first_reg, u8 *regvals, u8 numregs); -int ab3100_mask_and_set_register_interruptible(struct ab3100 *ab3100, - u8 reg, u8 andmask, u8 ormask); -u8 ab3100_get_chip_type(struct ab3100 *ab3100); int ab3100_event_register(struct ab3100 *ab3100, struct notifier_block *nb); int ab3100_event_unregister(struct ab3100 *ab3100, struct notifier_block *nb); -int ab3100_event_registers_startup_state_get(struct ab3100 *ab3100, - u32 *fatevent); +/* AB3550, STR register flags */ +#define AB3550_STR_ONSWA (0x01) +#define AB3550_STR_ONSWB (0x02) +#define AB3550_STR_ONSWC (0x04) +#define AB3550_STR_DCIO (0x08) +#define AB3550_STR_BOOT_MODE (0x10) +#define AB3550_STR_SIM_OFF (0x20) +#define AB3550_STR_BATT_REMOVAL (0x40) +#define AB3550_STR_VBUS (0x80) + +/* Interrupt mask registers */ +#define AB3550_IMR1 0x29 +#define AB3550_IMR2 0x2a +#define AB3550_IMR3 0x2b +#define AB3550_IMR4 0x2c +#define AB3550_IMR5 0x2d + +enum ab3550_devid { + AB3550_DEVID_ADC, + AB3550_DEVID_DAC, + AB3550_DEVID_LEDS, + AB3550_DEVID_POWER, + AB3550_DEVID_REGULATORS, + AB3550_DEVID_SIM, + AB3550_DEVID_UART, + AB3550_DEVID_RTC, + AB3550_DEVID_CHARGER, + AB3550_DEVID_FUELGAUGE, + AB3550_DEVID_VIBRATOR, + AB3550_DEVID_CODEC, + AB3550_NUM_DEVICES, +}; + +/** + * struct abx500_init_setting + * Initial value of the registers for driver to use during setup. + */ +struct abx500_init_settings { + u8 bank; + u8 reg; + u8 setting; +}; + +/** + * struct ab3550_platform_data + * Data supplied to initialize board connections to the AB3550 + */ +struct ab3550_platform_data { + struct {unsigned int base; unsigned int count; } irq; + void *dev_data[AB3550_NUM_DEVICES]; + size_t dev_data_sz[AB3550_NUM_DEVICES]; + struct abx500_init_settings *init_settings; + unsigned int init_settings_sz; +}; + +int abx500_set_register_interruptible(struct device *dev, u8 bank, u8 reg, + u8 value); +int abx500_get_register_interruptible(struct device *dev, u8 bank, u8 reg, + u8 *value); +int abx500_get_register_page_interruptible(struct device *dev, u8 bank, + u8 first_reg, u8 *regvals, u8 numregs); +int abx500_set_register_page_interruptible(struct device *dev, u8 bank, + u8 first_reg, u8 *regvals, u8 numregs); +/** + * abx500_mask_and_set_register_inerruptible() - Modifies selected bits of a + * target register + * + * @dev: The AB sub device. + * @bank: The i2c bank number. + * @bitmask: The bit mask to use. + * @bitvalues: The new bit values. + * + * Updates the value of an AB register: + * value -> ((value & ~bitmask) | (bitvalues & bitmask)) + */ +int abx500_mask_and_set_register_interruptible(struct device *dev, u8 bank, + u8 reg, u8 bitmask, u8 bitvalues); +int abx500_get_chip_id(struct device *dev); +int abx500_event_registers_startup_state_get(struct device *dev, u8 *event); +int abx500_startup_irq_enabled(struct device *dev, unsigned int irq); + +struct abx500_ops { + int (*get_chip_id) (struct device *); + int (*get_register) (struct device *, u8, u8, u8 *); + int (*set_register) (struct device *, u8, u8, u8); + int (*get_register_page) (struct device *, u8, u8, u8 *, u8); + int (*set_register_page) (struct device *, u8, u8, u8 *, u8); + int (*mask_and_set_register) (struct device *, u8, u8, u8, u8); + int (*event_registers_startup_state_get) (struct device *, u8 *); + int (*startup_irq_enabled) (struct device *, unsigned int); +}; + +int abx500_register_ops(struct device *core_dev, struct abx500_ops *ops); #endif diff --git a/include/linux/mfd/janz.h b/include/linux/mfd/janz.h new file mode 100644 index 00000000000..e9994c46980 --- /dev/null +++ b/include/linux/mfd/janz.h @@ -0,0 +1,54 @@ +/* + * Common Definitions for Janz MODULbus devices + * + * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef JANZ_H +#define JANZ_H + +struct janz_platform_data { + /* MODULbus Module Number */ + unsigned int modno; +}; + +/* PLX bridge chip onboard registers */ +struct janz_cmodio_onboard_regs { + u8 unused1; + + /* + * Read access: interrupt status + * Write access: interrupt disable + */ + u8 int_disable; + u8 unused2; + + /* + * Read access: MODULbus number (hex switch) + * Write access: interrupt enable + */ + u8 int_enable; + u8 unused3; + + /* write-only */ + u8 reset_assert; + u8 unused4; + + /* write-only */ + u8 reset_deassert; + u8 unused5; + + /* read-write access to serial EEPROM */ + u8 eep; + u8 unused6; + + /* write-only access to EEPROM chip select */ + u8 enid; +}; + +#endif /* JANZ_H */ diff --git a/include/linux/mfd/mc13783.h b/include/linux/mfd/mc13783.h index 8895d9d8879..4a894f68854 100644 --- a/include/linux/mfd/mc13783.h +++ b/include/linux/mfd/mc13783.h @@ -64,6 +64,70 @@ static inline int mc13783_ackirq(struct mc13783 *mc13783, int irq) MC13783_ADC0_TSMOD1 | \ MC13783_ADC0_TSMOD2) +struct mc13783_led_platform_data { +#define MC13783_LED_MD 0 +#define MC13783_LED_AD 1 +#define MC13783_LED_KP 2 +#define MC13783_LED_R1 3 +#define MC13783_LED_G1 4 +#define MC13783_LED_B1 5 +#define MC13783_LED_R2 6 +#define MC13783_LED_G2 7 +#define MC13783_LED_B2 8 +#define MC13783_LED_R3 9 +#define MC13783_LED_G3 10 +#define MC13783_LED_B3 11 +#define MC13783_LED_MAX MC13783_LED_B3 + int id; + const char *name; + const char *default_trigger; + +/* Three or two bits current selection depending on the led */ + char max_current; +}; + +struct mc13783_leds_platform_data { + int num_leds; + struct mc13783_led_platform_data *led; + +#define MC13783_LED_TRIODE_MD (1 << 0) +#define MC13783_LED_TRIODE_AD (1 << 1) +#define MC13783_LED_TRIODE_KP (1 << 2) +#define MC13783_LED_BOOST_EN (1 << 3) +#define MC13783_LED_TC1HALF (1 << 4) +#define MC13783_LED_SLEWLIMTC (1 << 5) +#define MC13783_LED_SLEWLIMBL (1 << 6) +#define MC13783_LED_TRIODE_TC1 (1 << 7) +#define MC13783_LED_TRIODE_TC2 (1 << 8) +#define MC13783_LED_TRIODE_TC3 (1 << 9) + int flags; + +#define MC13783_LED_AB_DISABLED 0 +#define MC13783_LED_AB_MD1 1 +#define MC13783_LED_AB_MD12 2 +#define MC13783_LED_AB_MD123 3 +#define MC13783_LED_AB_MD1234 4 +#define MC13783_LED_AB_MD1234_AD1 5 +#define MC13783_LED_AB_MD1234_AD12 6 +#define MC13783_LED_AB_MD1_AD 7 + char abmode; + +#define MC13783_LED_ABREF_200MV 0 +#define MC13783_LED_ABREF_400MV 1 +#define MC13783_LED_ABREF_600MV 2 +#define MC13783_LED_ABREF_800MV 3 + char abref; + +#define MC13783_LED_PERIOD_10MS 0 +#define MC13783_LED_PERIOD_100MS 1 +#define MC13783_LED_PERIOD_500MS 2 +#define MC13783_LED_PERIOD_2S 3 + char bl_period; + char tc1_period; + char tc2_period; + char tc3_period; +}; + /* to be cleaned up */ struct regulator_init_data; @@ -80,12 +144,14 @@ struct mc13783_regulator_platform_data { struct mc13783_platform_data { int num_regulators; struct mc13783_regulator_init_data *regulators; + struct mc13783_leds_platform_data *leds; #define MC13783_USE_TOUCHSCREEN (1 << 0) #define MC13783_USE_CODEC (1 << 1) #define MC13783_USE_ADC (1 << 2) #define MC13783_USE_RTC (1 << 3) #define MC13783_USE_REGULATOR (1 << 4) +#define MC13783_USE_LED (1 << 5) unsigned int flags; }; diff --git a/include/linux/mfd/pcf50633/backlight.h b/include/linux/mfd/pcf50633/backlight.h new file mode 100644 index 00000000000..83747e217b2 --- /dev/null +++ b/include/linux/mfd/pcf50633/backlight.h @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de> + * PCF50633 backlight device driver + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef __LINUX_MFD_PCF50633_BACKLIGHT +#define __LINUX_MFD_PCF50633_BACKLIGHT + +/* +* @default_brightness: Backlight brightness is initialized to this value +* +* Brightness to be used after the driver has been probed. +* Valid range 0-63. +* +* @default_brightness_limit: The actual brightness is limited by this value +* +* Brightness limit to be used after the driver has been probed. This is useful +* when it is not known how much power is available for the backlight during +* probe. +* Valid range 0-63. Can be changed later with pcf50633_bl_set_brightness_limit. +* +* @ramp_time: Display ramp time when changing brightness +* +* When changing the backlights brightness the change is not instant, instead +* it fades smooth from one state to another. This value specifies how long +* the fade should take. The lower the value the higher the fade time. +* Valid range 0-255 +*/ +struct pcf50633_bl_platform_data { + unsigned int default_brightness; + unsigned int default_brightness_limit; + uint8_t ramp_time; +}; + + +struct pcf50633; + +int pcf50633_bl_set_brightness_limit(struct pcf50633 *pcf, unsigned int limit); + +#endif + diff --git a/include/linux/mfd/pcf50633/core.h b/include/linux/mfd/pcf50633/core.h index 3398bd9aab1..ad411a78870 100644 --- a/include/linux/mfd/pcf50633/core.h +++ b/include/linux/mfd/pcf50633/core.h @@ -18,6 +18,7 @@ #include <linux/regulator/driver.h> #include <linux/regulator/machine.h> #include <linux/power_supply.h> +#include <linux/mfd/pcf50633/backlight.h> struct pcf50633; @@ -43,6 +44,8 @@ struct pcf50633_platform_data { void (*force_shutdown)(struct pcf50633 *); u8 resumers[5]; + + struct pcf50633_bl_platform_data *backlight_data; }; struct pcf50633_irq { @@ -152,6 +155,7 @@ struct pcf50633 { struct platform_device *mbc_pdev; struct platform_device *adc_pdev; struct platform_device *input_pdev; + struct platform_device *bl_pdev; struct platform_device *regulator_pdev[PCF50633_NUM_REGULATORS]; }; diff --git a/include/linux/mfd/rdc321x.h b/include/linux/mfd/rdc321x.h new file mode 100644 index 00000000000..4bdf19c8eed --- /dev/null +++ b/include/linux/mfd/rdc321x.h @@ -0,0 +1,26 @@ +#ifndef __RDC321X_MFD_H +#define __RDC321X_MFD_H + +#include <linux/types.h> +#include <linux/pci.h> + +/* Offsets to be accessed in the southbridge PCI + * device configuration register */ +#define RDC321X_WDT_CTRL 0x44 +#define RDC321X_GPIO_CTRL_REG1 0x48 +#define RDC321X_GPIO_DATA_REG1 0x4c +#define RDC321X_GPIO_CTRL_REG2 0x84 +#define RDC321X_GPIO_DATA_REG2 0x88 + +#define RDC321X_MAX_GPIO 58 + +struct rdc321x_gpio_pdata { + struct pci_dev *sb_pdev; + unsigned max_gpios; +}; + +struct rdc321x_wdt_pdata { + struct pci_dev *sb_pdev; +}; + +#endif /* __RDC321X_MFD_H */ diff --git a/include/linux/mfd/sh_mobile_sdhi.h b/include/linux/mfd/sh_mobile_sdhi.h index 3bcd7163485..49067802a6d 100644 --- a/include/linux/mfd/sh_mobile_sdhi.h +++ b/include/linux/mfd/sh_mobile_sdhi.h @@ -1,7 +1,13 @@ #ifndef __SH_MOBILE_SDHI_H__ #define __SH_MOBILE_SDHI_H__ +#include <linux/types.h> + struct sh_mobile_sdhi_info { + int dma_slave_tx; + int dma_slave_rx; + unsigned long tmio_flags; + u32 tmio_ocr_mask; /* available MMC voltages */ void (*set_pwr)(struct platform_device *pdev, int state); }; diff --git a/include/linux/mfd/tc35892.h b/include/linux/mfd/tc35892.h new file mode 100644 index 00000000000..e47f770d306 --- /dev/null +++ b/include/linux/mfd/tc35892.h @@ -0,0 +1,132 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License, version 2 + */ + +#ifndef __LINUX_MFD_TC35892_H +#define __LINUX_MFD_TC35892_H + +#include <linux/device.h> + +#define TC35892_RSTCTRL_IRQRST (1 << 4) +#define TC35892_RSTCTRL_TIMRST (1 << 3) +#define TC35892_RSTCTRL_ROTRST (1 << 2) +#define TC35892_RSTCTRL_KBDRST (1 << 1) +#define TC35892_RSTCTRL_GPIRST (1 << 0) + +#define TC35892_IRQST 0x91 + +#define TC35892_MANFCODE_MAGIC 0x03 +#define TC35892_MANFCODE 0x80 +#define TC35892_VERSION 0x81 +#define TC35892_IOCFG 0xA7 + +#define TC35892_CLKMODE 0x88 +#define TC35892_CLKCFG 0x89 +#define TC35892_CLKEN 0x8A + +#define TC35892_RSTCTRL 0x82 +#define TC35892_EXTRSTN 0x83 +#define TC35892_RSTINTCLR 0x84 + +#define TC35892_GPIOIS0 0xC9 +#define TC35892_GPIOIS1 0xCA +#define TC35892_GPIOIS2 0xCB +#define TC35892_GPIOIBE0 0xCC +#define TC35892_GPIOIBE1 0xCD +#define TC35892_GPIOIBE2 0xCE +#define TC35892_GPIOIEV0 0xCF +#define TC35892_GPIOIEV1 0xD0 +#define TC35892_GPIOIEV2 0xD1 +#define TC35892_GPIOIE0 0xD2 +#define TC35892_GPIOIE1 0xD3 +#define TC35892_GPIOIE2 0xD4 +#define TC35892_GPIORIS0 0xD6 +#define TC35892_GPIORIS1 0xD7 +#define TC35892_GPIORIS2 0xD8 +#define TC35892_GPIOMIS0 0xD9 +#define TC35892_GPIOMIS1 0xDA +#define TC35892_GPIOMIS2 0xDB +#define TC35892_GPIOIC0 0xDC +#define TC35892_GPIOIC1 0xDD +#define TC35892_GPIOIC2 0xDE + +#define TC35892_GPIODATA0 0xC0 +#define TC35892_GPIOMASK0 0xc1 +#define TC35892_GPIODATA1 0xC2 +#define TC35892_GPIOMASK1 0xc3 +#define TC35892_GPIODATA2 0xC4 +#define TC35892_GPIOMASK2 0xC5 + +#define TC35892_GPIODIR0 0xC6 +#define TC35892_GPIODIR1 0xC7 +#define TC35892_GPIODIR2 0xC8 + +#define TC35892_GPIOSYNC0 0xE6 +#define TC35892_GPIOSYNC1 0xE7 +#define TC35892_GPIOSYNC2 0xE8 + +#define TC35892_GPIOWAKE0 0xE9 +#define TC35892_GPIOWAKE1 0xEA +#define TC35892_GPIOWAKE2 0xEB + +#define TC35892_GPIOODM0 0xE0 +#define TC35892_GPIOODE0 0xE1 +#define TC35892_GPIOODM1 0xE2 +#define TC35892_GPIOODE1 0xE3 +#define TC35892_GPIOODM2 0xE4 +#define TC35892_GPIOODE2 0xE5 + +#define TC35892_INT_GPIIRQ 0 +#define TC35892_INT_TI0IRQ 1 +#define TC35892_INT_TI1IRQ 2 +#define TC35892_INT_TI2IRQ 3 +#define TC35892_INT_ROTIRQ 5 +#define TC35892_INT_KBDIRQ 6 +#define TC35892_INT_PORIRQ 7 + +#define TC35892_NR_INTERNAL_IRQS 8 +#define TC35892_INT_GPIO(x) (TC35892_NR_INTERNAL_IRQS + (x)) + +struct tc35892 { + struct mutex lock; + struct device *dev; + struct i2c_client *i2c; + + int irq_base; + int num_gpio; + struct tc35892_platform_data *pdata; +}; + +extern int tc35892_reg_write(struct tc35892 *tc35892, u8 reg, u8 data); +extern int tc35892_reg_read(struct tc35892 *tc35892, u8 reg); +extern int tc35892_block_read(struct tc35892 *tc35892, u8 reg, u8 length, + u8 *values); +extern int tc35892_block_write(struct tc35892 *tc35892, u8 reg, u8 length, + const u8 *values); +extern int tc35892_set_bits(struct tc35892 *tc35892, u8 reg, u8 mask, u8 val); + +/** + * struct tc35892_gpio_platform_data - TC35892 GPIO platform data + * @gpio_base: first gpio number assigned to TC35892. A maximum of + * %TC35892_NR_GPIOS GPIOs will be allocated. + */ +struct tc35892_gpio_platform_data { + int gpio_base; +}; + +/** + * struct tc35892_platform_data - TC35892 platform data + * @irq_base: base IRQ number. %TC35892_NR_IRQS irqs will be used. + * @gpio: GPIO-specific platform data + */ +struct tc35892_platform_data { + int irq_base; + struct tc35892_gpio_platform_data *gpio; +}; + +#define TC35892_NR_GPIOS 24 +#define TC35892_NR_IRQS TC35892_INT_GPIO(TC35892_NR_GPIOS) + +#endif diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index c3f7dff8eff..f07425bc3dc 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -50,17 +50,28 @@ tmio_iowrite16((val) >> 16, (base) + ((reg + 2) << (shift))); \ } while (0) +/* tmio MMC platform flags */ +#define TMIO_MMC_WRPROTECT_DISABLE (1 << 0) + int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base); int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base); void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state); void tmio_core_mmc_clk_div(void __iomem *cnf, int shift, int state); +struct tmio_mmc_dma { + void *chan_priv_tx; + void *chan_priv_rx; +}; + /* * data for the MMC controller */ struct tmio_mmc_data { unsigned int hclk; unsigned long capabilities; + unsigned long flags; + u32 ocr_mask; /* available voltages */ + struct tmio_mmc_dma *dma; void (*set_pwr)(struct platform_device *host, int state); void (*set_clk_div)(struct platform_device *host, int state); }; diff --git a/include/linux/mfd/tps6507x.h b/include/linux/mfd/tps6507x.h new file mode 100644 index 00000000000..c923e4864f5 --- /dev/null +++ b/include/linux/mfd/tps6507x.h @@ -0,0 +1,169 @@ +/* linux/mfd/tps6507x.h + * + * Functions to access TPS65070 power management chip. + * + * Copyright (c) 2009 RidgeRun (todd.fischer@ridgerun.com) + * + * + * For licencing details see kernel-base/COPYING + */ + +#ifndef __LINUX_MFD_TPS6507X_H +#define __LINUX_MFD_TPS6507X_H + +/* + * ---------------------------------------------------------------------------- + * Registers, all 8 bits + * ---------------------------------------------------------------------------- + */ + + +/* Register definitions */ +#define TPS6507X_REG_PPATH1 0X01 +#define TPS6507X_CHG_USB BIT(7) +#define TPS6507X_CHG_AC BIT(6) +#define TPS6507X_CHG_USB_PW_ENABLE BIT(5) +#define TPS6507X_CHG_AC_PW_ENABLE BIT(4) +#define TPS6507X_CHG_AC_CURRENT BIT(2) +#define TPS6507X_CHG_USB_CURRENT BIT(0) + +#define TPS6507X_REG_INT 0X02 +#define TPS6507X_REG_MASK_AC_USB BIT(7) +#define TPS6507X_REG_MASK_TSC BIT(6) +#define TPS6507X_REG_MASK_PB_IN BIT(5) +#define TPS6507X_REG_TSC_INT BIT(3) +#define TPS6507X_REG_PB_IN_INT BIT(2) +#define TPS6507X_REG_AC_USB_APPLIED BIT(1) +#define TPS6507X_REG_AC_USB_REMOVED BIT(0) + +#define TPS6507X_REG_CHGCONFIG0 0X03 + +#define TPS6507X_REG_CHGCONFIG1 0X04 +#define TPS6507X_CON_CTRL1_DCDC1_ENABLE BIT(4) +#define TPS6507X_CON_CTRL1_DCDC2_ENABLE BIT(3) +#define TPS6507X_CON_CTRL1_DCDC3_ENABLE BIT(2) +#define TPS6507X_CON_CTRL1_LDO1_ENABLE BIT(1) +#define TPS6507X_CON_CTRL1_LDO2_ENABLE BIT(0) + +#define TPS6507X_REG_CHGCONFIG2 0X05 + +#define TPS6507X_REG_CHGCONFIG3 0X06 + +#define TPS6507X_REG_ADCONFIG 0X07 +#define TPS6507X_ADCONFIG_AD_ENABLE BIT(7) +#define TPS6507X_ADCONFIG_START_CONVERSION BIT(6) +#define TPS6507X_ADCONFIG_CONVERSION_DONE BIT(5) +#define TPS6507X_ADCONFIG_VREF_ENABLE BIT(4) +#define TPS6507X_ADCONFIG_INPUT_AD_IN1 0 +#define TPS6507X_ADCONFIG_INPUT_AD_IN2 1 +#define TPS6507X_ADCONFIG_INPUT_AD_IN3 2 +#define TPS6507X_ADCONFIG_INPUT_AD_IN4 3 +#define TPS6507X_ADCONFIG_INPUT_TS_PIN 4 +#define TPS6507X_ADCONFIG_INPUT_BAT_CURRENT 5 +#define TPS6507X_ADCONFIG_INPUT_AC_VOLTAGE 6 +#define TPS6507X_ADCONFIG_INPUT_SYS_VOLTAGE 7 +#define TPS6507X_ADCONFIG_INPUT_CHARGER_VOLTAGE 8 +#define TPS6507X_ADCONFIG_INPUT_BAT_VOLTAGE 9 +#define TPS6507X_ADCONFIG_INPUT_THRESHOLD_VOLTAGE 10 +#define TPS6507X_ADCONFIG_INPUT_ISET1_VOLTAGE 11 +#define TPS6507X_ADCONFIG_INPUT_ISET2_VOLTAGE 12 +#define TPS6507X_ADCONFIG_INPUT_REAL_TSC 14 +#define TPS6507X_ADCONFIG_INPUT_TSC 15 + +#define TPS6507X_REG_TSCMODE 0X08 +#define TPS6507X_TSCMODE_X_POSITION 0 +#define TPS6507X_TSCMODE_Y_POSITION 1 +#define TPS6507X_TSCMODE_PRESSURE 2 +#define TPS6507X_TSCMODE_X_PLATE 3 +#define TPS6507X_TSCMODE_Y_PLATE 4 +#define TPS6507X_TSCMODE_STANDBY 5 +#define TPS6507X_TSCMODE_ADC_INPUT 6 +#define TPS6507X_TSCMODE_DISABLE 7 + +#define TPS6507X_REG_ADRESULT_1 0X09 + +#define TPS6507X_REG_ADRESULT_2 0X0A +#define TPS6507X_REG_ADRESULT_2_MASK (BIT(1) | BIT(0)) + +#define TPS6507X_REG_PGOOD 0X0B + +#define TPS6507X_REG_PGOODMASK 0X0C + +#define TPS6507X_REG_CON_CTRL1 0X0D +#define TPS6507X_CON_CTRL1_DCDC1_ENABLE BIT(4) +#define TPS6507X_CON_CTRL1_DCDC2_ENABLE BIT(3) +#define TPS6507X_CON_CTRL1_DCDC3_ENABLE BIT(2) +#define TPS6507X_CON_CTRL1_LDO1_ENABLE BIT(1) +#define TPS6507X_CON_CTRL1_LDO2_ENABLE BIT(0) + +#define TPS6507X_REG_CON_CTRL2 0X0E + +#define TPS6507X_REG_CON_CTRL3 0X0F + +#define TPS6507X_REG_DEFDCDC1 0X10 +#define TPS6507X_DEFDCDC1_DCDC1_EXT_ADJ_EN BIT(7) +#define TPS6507X_DEFDCDC1_DCDC1_MASK 0X3F + +#define TPS6507X_REG_DEFDCDC2_LOW 0X11 +#define TPS6507X_DEFDCDC2_LOW_DCDC2_MASK 0X3F + +#define TPS6507X_REG_DEFDCDC2_HIGH 0X12 +#define TPS6507X_DEFDCDC2_HIGH_DCDC2_MASK 0X3F + +#define TPS6507X_REG_DEFDCDC3_LOW 0X13 +#define TPS6507X_DEFDCDC3_LOW_DCDC3_MASK 0X3F + +#define TPS6507X_REG_DEFDCDC3_HIGH 0X14 +#define TPS6507X_DEFDCDC3_HIGH_DCDC3_MASK 0X3F + +#define TPS6507X_REG_DEFSLEW 0X15 + +#define TPS6507X_REG_LDO_CTRL1 0X16 +#define TPS6507X_REG_LDO_CTRL1_LDO1_MASK 0X0F + +#define TPS6507X_REG_DEFLDO2 0X17 +#define TPS6507X_REG_DEFLDO2_LDO2_MASK 0X3F + +#define TPS6507X_REG_WLED_CTRL1 0X18 + +#define TPS6507X_REG_WLED_CTRL2 0X19 + +/* VDCDC MASK */ +#define TPS6507X_DEFDCDCX_DCDC_MASK 0X3F + +#define TPS6507X_MAX_REGISTER 0X19 + +/** + * struct tps6507x_board - packages regulator and touchscreen init data + * @tps6507x_regulator_data: regulator initialization values + * + * Board data may be used to initialize regulator and touchscreen. + */ + +struct tps6507x_board { + struct regulator_init_data *tps6507x_pmic_init_data; + struct touchscreen_init_data *tps6507x_ts_init_data; +}; + +/** + * struct tps6507x_dev - tps6507x sub-driver chip access routines + * @read_dev() - I2C register read function + * @write_dev() - I2C register write function + * + * Device data may be used to access the TPS6507x chip + */ + +struct tps6507x_dev { + struct device *dev; + struct i2c_client *i2c_client; + int (*read_dev)(struct tps6507x_dev *tps6507x, char reg, int size, + void *dest); + int (*write_dev)(struct tps6507x_dev *tps6507x, char reg, int size, + void *src); + + /* Client devices */ + struct tps6507x_pmic *pmic; + struct tps6507x_ts *ts; +}; + +#endif /* __LINUX_MFD_TPS6507X_H */ diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h index 5915f6e3d9a..eb5bd4e0e03 100644 --- a/include/linux/mfd/wm831x/core.h +++ b/include/linux/mfd/wm831x/core.h @@ -256,8 +256,9 @@ struct wm831x { int irq_masks_cache[WM831X_NUM_IRQ_REGS]; /* Cached hardware value */ /* Chip revision based flags */ - unsigned has_gpio_ena:1; /* Has GPIO enable bit */ - unsigned has_cs_sts:1; /* Has current sink status bit */ + unsigned has_gpio_ena:1; /* Has GPIO enable bit */ + unsigned has_cs_sts:1; /* Has current sink status bit */ + unsigned charger_irq_wake:1; /* Are charger IRQs a wake source? */ int num_gpio; |