diff options
Diffstat (limited to 'include/linux/mfd')
35 files changed, 2526 insertions, 147 deletions
diff --git a/include/linux/mfd/88pm80x.h b/include/linux/mfd/88pm80x.h index a0ca0dca124..478672ed0c3 100644 --- a/include/linux/mfd/88pm80x.h +++ b/include/linux/mfd/88pm80x.h @@ -364,6 +364,6 @@ static inline int pm80x_dev_resume(struct device *dev) #endif extern int pm80x_init(struct i2c_client *client, - const struct i2c_device_id *id) __devinit; + const struct i2c_device_id *id); extern int pm80x_deinit(struct i2c_client *client); #endif /* __LINUX_MFD_88PM80X_H */ diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h index 5d5298d5602..e53dcfeaee6 100644 --- a/include/linux/mfd/abx500.h +++ b/include/linux/mfd/abx500.h @@ -267,39 +267,19 @@ struct abx500_bm_data { int gnd_lift_resistance; const struct abx500_maxim_parameters *maxi; const struct abx500_bm_capacity_levels *cap_levels; - const struct abx500_battery_type *bat_type; + struct abx500_battery_type *bat_type; const struct abx500_bm_charger_parameters *chg_params; const struct abx500_fg_parameters *fg_params; }; -struct abx500_chargalg_platform_data { - char **supplied_to; - size_t num_supplicants; +enum { + NTC_EXTERNAL = 0, + NTC_INTERNAL, }; -struct abx500_charger_platform_data { - char **supplied_to; - size_t num_supplicants; - bool autopower_cfg; -}; - -struct abx500_btemp_platform_data { - char **supplied_to; - size_t num_supplicants; -}; - -struct abx500_fg_platform_data { - char **supplied_to; - size_t num_supplicants; -}; - -struct abx500_bm_plat_data { - struct abx500_bm_data *battery; - struct abx500_charger_platform_data *charger; - struct abx500_btemp_platform_data *btemp; - struct abx500_fg_platform_data *fg; - struct abx500_chargalg_platform_data *chargalg; -}; +int bmdevs_of_probe(struct device *dev, + struct device_node *np, + struct abx500_bm_data **battery); int abx500_set_register_interruptible(struct device *dev, u8 bank, u8 reg, u8 value); diff --git a/include/linux/mfd/abx500/ab8500-bm.h b/include/linux/mfd/abx500/ab8500-bm.h index 44310c98ee6..9bd037df97d 100644 --- a/include/linux/mfd/abx500/ab8500-bm.h +++ b/include/linux/mfd/abx500/ab8500-bm.h @@ -422,7 +422,10 @@ struct ab8500_chargalg_platform_data { struct ab8500_btemp; struct ab8500_gpadc; struct ab8500_fg; + #ifdef CONFIG_AB8500_BM +extern struct abx500_bm_data ab8500_bm_data; + void ab8500_fg_reinit(void); void ab8500_charger_usb_state_changed(u8 bm_usb_state, u16 mA); struct ab8500_btemp *ab8500_btemp_get(void); @@ -434,31 +437,7 @@ int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res); int ab8500_fg_inst_curr_done(struct ab8500_fg *di); #else -int ab8500_fg_inst_curr_done(struct ab8500_fg *di) -{ -} -static void ab8500_fg_reinit(void) -{ -} -static void ab8500_charger_usb_state_changed(u8 bm_usb_state, u16 mA) -{ -} -static struct ab8500_btemp *ab8500_btemp_get(void) -{ - return NULL; -} -static int ab8500_btemp_get_batctrl_temp(struct ab8500_btemp *btemp) -{ - return 0; -} -struct ab8500_fg *ab8500_fg_get(void) -{ - return NULL; -} -static int ab8500_fg_inst_curr_blocking(struct ab8500_fg *dev) -{ - return -ENODEV; -} +static struct abx500_bm_data ab8500_bm_data; static inline int ab8500_fg_inst_curr_start(struct ab8500_fg *di) { diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h index 1491044efa1..1cb5698b4d7 100644 --- a/include/linux/mfd/abx500/ab8500.h +++ b/include/linux/mfd/abx500/ab8500.h @@ -291,9 +291,9 @@ struct ab8500_platform_data { struct ab8500_codec_platform_data *codec; }; -extern int __devinit ab8500_init(struct ab8500 *ab8500, +extern int ab8500_init(struct ab8500 *ab8500, enum ab8500_version version); -extern int __devexit ab8500_exit(struct ab8500 *ab8500); +extern int ab8500_exit(struct ab8500 *ab8500); extern int ab8500_suspend(struct ab8500 *ab8500); diff --git a/include/linux/mfd/arizona/core.h b/include/linux/mfd/arizona/core.h index dd231ac0bb1..a580363a7d2 100644 --- a/include/linux/mfd/arizona/core.h +++ b/include/linux/mfd/arizona/core.h @@ -78,6 +78,8 @@ enum arizona_type { #define ARIZONA_NUM_IRQ 50 +struct snd_soc_dapm_context; + struct arizona { struct regmap *regmap; struct device *dev; @@ -98,6 +100,8 @@ struct arizona { struct mutex clk_lock; int clk32k_ref; + + struct snd_soc_dapm_context *dapm; }; int arizona_clk32k_enable(struct arizona *arizona); diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h index 7ab442905a5..8b1d1daaae1 100644 --- a/include/linux/mfd/arizona/pdata.h +++ b/include/linux/mfd/arizona/pdata.h @@ -62,6 +62,9 @@ #define ARIZONA_MAX_OUTPUT 6 +#define ARIZONA_HAP_ACT_ERM 0 +#define ARIZONA_HAP_ACT_LRA 2 + #define ARIZONA_MAX_PDM_SPK 2 struct regulator_init_data; @@ -114,6 +117,9 @@ struct arizona_pdata { /** PDM speaker format */ unsigned int spk_fmt[ARIZONA_MAX_PDM_SPK]; + + /** Haptic actuator type */ + unsigned int hap_act; }; #endif diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h index 7671a287dfe..1f6fe31a4d5 100644 --- a/include/linux/mfd/arizona/registers.h +++ b/include/linux/mfd/arizona/registers.h @@ -76,6 +76,7 @@ #define ARIZONA_RATE_ESTIMATOR_3 0x154 #define ARIZONA_RATE_ESTIMATOR_4 0x155 #define ARIZONA_RATE_ESTIMATOR_5 0x156 +#define ARIZONA_DYNAMIC_FREQUENCY_SCALING_1 0x161 #define ARIZONA_FLL1_CONTROL_1 0x171 #define ARIZONA_FLL1_CONTROL_2 0x172 #define ARIZONA_FLL1_CONTROL_3 0x173 @@ -110,6 +111,7 @@ #define ARIZONA_FLL2_GPIO_CLOCK 0x1AA #define ARIZONA_MIC_CHARGE_PUMP_1 0x200 #define ARIZONA_LDO1_CONTROL_1 0x210 +#define ARIZONA_LDO1_CONTROL_2 0x212 #define ARIZONA_LDO2_CONTROL_1 0x213 #define ARIZONA_MIC_BIAS_CTRL_1 0x218 #define ARIZONA_MIC_BIAS_CTRL_2 0x219 @@ -979,6 +981,7 @@ #define ARIZONA_DSP1_CLOCKING_1 0x1101 #define ARIZONA_DSP1_STATUS_1 0x1104 #define ARIZONA_DSP1_STATUS_2 0x1105 +#define ARIZONA_DSP1_STATUS_3 0x1106 #define ARIZONA_DSP2_CONTROL_1 0x1200 #define ARIZONA_DSP2_CLOCKING_1 0x1201 #define ARIZONA_DSP2_STATUS_1 0x1204 @@ -1574,6 +1577,13 @@ #define ARIZONA_SAMPLE_RATE_DETECT_D_WIDTH 5 /* SAMPLE_RATE_DETECT_D - [4:0] */ /* + * R353 (0x161) - Dynamic Frequency Scaling 1 + */ +#define ARIZONA_SUBSYS_MAX_FREQ 0x0001 /* SUBSYS_MAX_FREQ */ +#define ARIZONA_SUBSYS_MAX_FREQ_SHIFT 0 /* SUBSYS_MAX_FREQ */ +#define ARIZONA_SUBSYS_MAX_FREQ_WIDTH 1 /* SUBSYS_MAX_FREQ */ + +/* * R369 (0x171) - FLL1 Control 1 */ #define ARIZONA_FLL1_FREERUN 0x0002 /* FLL1_FREERUN */ @@ -1889,6 +1899,13 @@ #define ARIZONA_LDO1_ENA_WIDTH 1 /* LDO1_ENA */ /* + * R530 (0x212) - LDO1 Control 2 + */ +#define ARIZONA_LDO1_HI_PWR 0x0001 /* LDO1_HI_PWR */ +#define ARIZONA_LDO1_HI_PWR_SHIFT 0 /* LDO1_HI_PWR */ +#define ARIZONA_LDO1_HI_PWR_WIDTH 1 /* LDO1_HI_PWR */ + +/* * R531 (0x213) - LDO2 Control 1 */ #define ARIZONA_LDO2_VSEL_MASK 0x07E0 /* LDO2_VSEL - [10:5] */ diff --git a/include/linux/mfd/as3711.h b/include/linux/mfd/as3711.h new file mode 100644 index 00000000000..38452ce1e89 --- /dev/null +++ b/include/linux/mfd/as3711.h @@ -0,0 +1,126 @@ +/* + * AS3711 PMIC MFC driver header + * + * Copyright (C) 2012 Renesas Electronics Corporation + * Author: Guennadi Liakhovetski, <g.liakhovetski@gmx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the version 2 of the GNU General Public License as + * published by the Free Software Foundation + */ + +#ifndef MFD_AS3711_H +#define MFD_AS3711_H + +/* + * Client data + */ + +/* Register addresses */ +#define AS3711_SD_1_VOLTAGE 0 /* Digital Step-Down */ +#define AS3711_SD_2_VOLTAGE 1 +#define AS3711_SD_3_VOLTAGE 2 +#define AS3711_SD_4_VOLTAGE 3 +#define AS3711_LDO_1_VOLTAGE 4 /* Analog LDO */ +#define AS3711_LDO_2_VOLTAGE 5 +#define AS3711_LDO_3_VOLTAGE 6 /* Digital LDO */ +#define AS3711_LDO_4_VOLTAGE 7 +#define AS3711_LDO_5_VOLTAGE 8 +#define AS3711_LDO_6_VOLTAGE 9 +#define AS3711_LDO_7_VOLTAGE 0xa +#define AS3711_LDO_8_VOLTAGE 0xb +#define AS3711_SD_CONTROL 0x10 +#define AS3711_GPIO_SIGNAL_OUT 0x20 +#define AS3711_GPIO_SIGNAL_IN 0x21 +#define AS3711_SD_CONTROL_1 0x30 +#define AS3711_SD_CONTROL_2 0x31 +#define AS3711_CURR_CONTROL 0x40 +#define AS3711_CURR1_VALUE 0x43 +#define AS3711_CURR2_VALUE 0x44 +#define AS3711_CURR3_VALUE 0x45 +#define AS3711_STEPUP_CONTROL_1 0x50 +#define AS3711_STEPUP_CONTROL_2 0x51 +#define AS3711_STEPUP_CONTROL_4 0x53 +#define AS3711_STEPUP_CONTROL_5 0x54 +#define AS3711_REG_STATUS 0x73 +#define AS3711_INTERRUPT_STATUS_1 0x77 +#define AS3711_INTERRUPT_STATUS_2 0x78 +#define AS3711_INTERRUPT_STATUS_3 0x79 +#define AS3711_CHARGER_STATUS_1 0x86 +#define AS3711_CHARGER_STATUS_2 0x87 +#define AS3711_ASIC_ID_1 0x90 +#define AS3711_ASIC_ID_2 0x91 + +#define AS3711_MAX_REGS 0x92 + +/* Regulators */ +enum { + AS3711_REGULATOR_SD_1, + AS3711_REGULATOR_SD_2, + AS3711_REGULATOR_SD_3, + AS3711_REGULATOR_SD_4, + AS3711_REGULATOR_LDO_1, + AS3711_REGULATOR_LDO_2, + AS3711_REGULATOR_LDO_3, + AS3711_REGULATOR_LDO_4, + AS3711_REGULATOR_LDO_5, + AS3711_REGULATOR_LDO_6, + AS3711_REGULATOR_LDO_7, + AS3711_REGULATOR_LDO_8, + + AS3711_REGULATOR_MAX, +}; + +struct device; +struct regmap; + +struct as3711 { + struct device *dev; + struct regmap *regmap; +}; + +#define AS3711_MAX_STEPDOWN 4 +#define AS3711_MAX_STEPUP 2 +#define AS3711_MAX_LDO 8 + +enum as3711_su2_feedback { + AS3711_SU2_VOLTAGE, + AS3711_SU2_CURR1, + AS3711_SU2_CURR2, + AS3711_SU2_CURR3, + AS3711_SU2_CURR_AUTO, +}; + +enum as3711_su2_fbprot { + AS3711_SU2_LX_SD4, + AS3711_SU2_GPIO2, + AS3711_SU2_GPIO3, + AS3711_SU2_GPIO4, +}; + +/* + * Platform data + */ + +struct as3711_regulator_pdata { + struct regulator_init_data *init_data[AS3711_REGULATOR_MAX]; +}; + +struct as3711_bl_pdata { + const char *su1_fb; + int su1_max_uA; + const char *su2_fb; + int su2_max_uA; + enum as3711_su2_feedback su2_feedback; + enum as3711_su2_fbprot su2_fbprot; + bool su2_auto_curr1; + bool su2_auto_curr2; + bool su2_auto_curr3; +}; + +struct as3711_platform_data { + struct as3711_regulator_pdata regulator; + struct as3711_bl_pdata backlight; +}; + +#endif diff --git a/include/linux/mfd/da9052/da9052.h b/include/linux/mfd/da9052/da9052.h index 0507c4c21a7..786d02eb79d 100644 --- a/include/linux/mfd/da9052/da9052.h +++ b/include/linux/mfd/da9052/da9052.h @@ -99,6 +99,9 @@ struct da9052 { u8 chip_id; int chip_irq; + + /* SOC I/O transfer related fixes for DA9052/53 */ + int (*fix_io) (struct da9052 *da9052, unsigned char reg); }; /* ADC API */ @@ -113,32 +116,87 @@ static inline int da9052_reg_read(struct da9052 *da9052, unsigned char reg) ret = regmap_read(da9052->regmap, reg, &val); if (ret < 0) return ret; + + if (da9052->fix_io) { + ret = da9052->fix_io(da9052, reg); + if (ret < 0) + return ret; + } + return val; } static inline int da9052_reg_write(struct da9052 *da9052, unsigned char reg, unsigned char val) { - return regmap_write(da9052->regmap, reg, val); + int ret; + + ret = regmap_write(da9052->regmap, reg, val); + if (ret < 0) + return ret; + + if (da9052->fix_io) { + ret = da9052->fix_io(da9052, reg); + if (ret < 0) + return ret; + } + + return ret; } static inline int da9052_group_read(struct da9052 *da9052, unsigned char reg, unsigned reg_cnt, unsigned char *val) { - return regmap_bulk_read(da9052->regmap, reg, val, reg_cnt); + int ret; + + ret = regmap_bulk_read(da9052->regmap, reg, val, reg_cnt); + if (ret < 0) + return ret; + + if (da9052->fix_io) { + ret = da9052->fix_io(da9052, reg); + if (ret < 0) + return ret; + } + + return ret; } static inline int da9052_group_write(struct da9052 *da9052, unsigned char reg, unsigned reg_cnt, unsigned char *val) { - return regmap_raw_write(da9052->regmap, reg, val, reg_cnt); + int ret; + + ret = regmap_raw_write(da9052->regmap, reg, val, reg_cnt); + if (ret < 0) + return ret; + + if (da9052->fix_io) { + ret = da9052->fix_io(da9052, reg); + if (ret < 0) + return ret; + } + + return ret; } static inline int da9052_reg_update(struct da9052 *da9052, unsigned char reg, unsigned char bit_mask, unsigned char reg_val) { - return regmap_update_bits(da9052->regmap, reg, bit_mask, reg_val); + int ret; + + ret = regmap_update_bits(da9052->regmap, reg, bit_mask, reg_val); + if (ret < 0) + return ret; + + if (da9052->fix_io) { + ret = da9052->fix_io(da9052, reg); + if (ret < 0) + return ret; + } + + return ret; } int da9052_device_init(struct da9052 *da9052, u8 chip_id); @@ -146,4 +204,14 @@ void da9052_device_exit(struct da9052 *da9052); extern struct regmap_config da9052_regmap_config; +int da9052_irq_init(struct da9052 *da9052); +int da9052_irq_exit(struct da9052 *da9052); +int da9052_request_irq(struct da9052 *da9052, int irq, char *name, + irq_handler_t handler, void *data); +void da9052_free_irq(struct da9052 *da9052, int irq, void *data); + +int da9052_enable_irq(struct da9052 *da9052, int irq); +int da9052_disable_irq(struct da9052 *da9052, int irq); +int da9052_disable_irq_nosync(struct da9052 *da9052, int irq); + #endif /* __MFD_DA9052_DA9052_H */ diff --git a/include/linux/mfd/da9052/reg.h b/include/linux/mfd/da9052/reg.h index b97f7309d7f..c4dd3a8add2 100644 --- a/include/linux/mfd/da9052/reg.h +++ b/include/linux/mfd/da9052/reg.h @@ -34,6 +34,9 @@ #define DA9052_STATUS_C_REG 3 #define DA9052_STATUS_D_REG 4 +/* PARK REGISTER */ +#define DA9052_PARK_REGISTER DA9052_STATUS_D_REG + /* EVENT REGISTERS */ #define DA9052_EVENT_A_REG 5 #define DA9052_EVENT_B_REG 6 diff --git a/include/linux/mfd/da9055/core.h b/include/linux/mfd/da9055/core.h index c96ad682c59..956afa44599 100644 --- a/include/linux/mfd/da9055/core.h +++ b/include/linux/mfd/da9055/core.h @@ -1,4 +1,4 @@ -/* +/* * da9055 declarations for DA9055 PMICs. * * Copyright(c) 2012 Dialog Semiconductor Ltd. diff --git a/include/linux/mfd/da9055/pdata.h b/include/linux/mfd/da9055/pdata.h index 147293b4471..04e092be4b0 100644 --- a/include/linux/mfd/da9055/pdata.h +++ b/include/linux/mfd/da9055/pdata.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2012 Dialog Semiconductor Ltd. +/* Copyright (C) 2012 Dialog Semiconductor Ltd. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -25,8 +25,29 @@ struct da9055_pdata { int gpio_base; struct regulator_init_data *regulators[DA9055_MAX_REGULATORS]; - bool reset_enable; /* Enable RTC in RESET Mode */ - enum gpio_select *gpio_rsel; /* Select regulator set thru GPIO 1/2 */ - enum gpio_select *gpio_ren; /* Enable regulator thru GPIO 1/2 */ + /* Enable RTC in RESET Mode */ + bool reset_enable; + /* + * GPI muxed pin to control + * regulator state A/B, 0 if not available. + */ + int *gpio_ren; + /* + * GPI muxed pin to control + * regulator set, 0 if not available. + */ + int *gpio_rsel; + /* + * Regulator mode control bits value (GPI offset) that + * that controls the regulator state, 0 if not available. + */ + enum gpio_select *reg_ren; + /* + * Regulator mode control bits value (GPI offset) that + * controls the regulator set A/B, 0 if not available. + */ + enum gpio_select *reg_rsel; + /* GPIOs to enable regulator, 0 if not available */ + int *ena_gpio; }; #endif /* __DA9055_PDATA_H */ diff --git a/include/linux/mfd/da9055/reg.h b/include/linux/mfd/da9055/reg.h index df237ee5480..2b592e072db 100644 --- a/include/linux/mfd/da9055/reg.h +++ b/include/linux/mfd/da9055/reg.h @@ -1,4 +1,4 @@ -/* +/* * DA9055 declarations for DA9055 PMICs. * * Copyright(c) 2012 Dialog Semiconductor Ltd. diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h index b82f6ee66a0..6ee4247df11 100644 --- a/include/linux/mfd/db8500-prcmu.h +++ b/include/linux/mfd/db8500-prcmu.h @@ -515,7 +515,6 @@ enum romcode_read prcmu_get_rc_p2a(void); enum ap_pwrst prcmu_get_xp70_current_state(void); bool prcmu_has_arm_maxopp(void); struct prcmu_fw_version *prcmu_get_fw_version(void); -int prcmu_request_ape_opp_100_voltage(bool enable); int prcmu_release_usb_wakeup_state(void); void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep, struct prcmu_auto_pm_config *idle); @@ -564,6 +563,7 @@ int db8500_prcmu_set_arm_opp(u8 opp); int db8500_prcmu_get_arm_opp(void); int db8500_prcmu_set_ape_opp(u8 opp); int db8500_prcmu_get_ape_opp(void); +int db8500_prcmu_request_ape_opp_100_voltage(bool enable); int db8500_prcmu_set_ddr_opp(u8 opp); int db8500_prcmu_get_ddr_opp(void); @@ -610,7 +610,7 @@ static inline int db8500_prcmu_get_ape_opp(void) return APE_100_OPP; } -static inline int prcmu_request_ape_opp_100_voltage(bool enable) +static inline int db8500_prcmu_request_ape_opp_100_voltage(bool enable) { return 0; } diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h index c410d99bd66..c202d6c4d87 100644 --- a/include/linux/mfd/dbx500-prcmu.h +++ b/include/linux/mfd/dbx500-prcmu.h @@ -336,6 +336,11 @@ static inline int prcmu_get_ape_opp(void) return db8500_prcmu_get_ape_opp(); } +static inline int prcmu_request_ape_opp_100_voltage(bool enable) +{ + return db8500_prcmu_request_ape_opp_100_voltage(enable); +} + static inline void prcmu_system_reset(u16 reset_code) { return db8500_prcmu_system_reset(reset_code); @@ -507,6 +512,11 @@ static inline int prcmu_get_ape_opp(void) return APE_100_OPP; } +static inline int prcmu_request_ape_opp_100_voltage(bool enable) +{ + return 0; +} + static inline int prcmu_set_arm_opp(u8 opp) { return 0; diff --git a/include/linux/mfd/lp8788.h b/include/linux/mfd/lp8788.h index cec364bdccf..2a32b16f79c 100644 --- a/include/linux/mfd/lp8788.h +++ b/include/linux/mfd/lp8788.h @@ -211,16 +211,16 @@ struct lp8788_chg_param { /* * struct lp8788_charger_platform_data - * @vbatt_adc : adc selection id for battery voltage - * @batt_temp_adc : adc selection id for battery temperature + * @adc_vbatt : adc channel name for battery voltage + * @adc_batt_temp : adc channel name for battery temperature * @max_vbatt_mv : used for calculating battery capacity * @chg_params : initial charging parameters * @num_chg_params : numbers of charging parameters * @charger_event : the charger event can be reported to the platform side */ struct lp8788_charger_platform_data { - enum lp8788_adc_id vbatt_adc; - enum lp8788_adc_id batt_temp_adc; + const char *adc_vbatt; + const char *adc_batt_temp; unsigned int max_vbatt_mv; struct lp8788_chg_param *chg_params; int num_chg_params; diff --git a/include/linux/mfd/max8997-private.h b/include/linux/mfd/max8997-private.h index 830152cfae3..6ae21bf47d6 100644 --- a/include/linux/mfd/max8997-private.h +++ b/include/linux/mfd/max8997-private.h @@ -316,6 +316,7 @@ enum max8997_irq { #define MAX8997_NUM_GPIO 12 struct max8997_dev { struct device *dev; + struct max8997_platform_data *pdata; struct i2c_client *i2c; /* 0xcc / PMIC, Battery Control, and FLASH */ struct i2c_client *rtc; /* slave addr 0x0c */ struct i2c_client *haptic; /* slave addr 0x90 */ diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h index 328d8e24b53..1d4a4fe6ac3 100644 --- a/include/linux/mfd/max8997.h +++ b/include/linux/mfd/max8997.h @@ -75,6 +75,7 @@ enum max8998_regulators { struct max8997_regulator_data { int id; struct regulator_init_data *initdata; + struct device_node *reg_node; }; enum max8997_muic_usb_type { diff --git a/include/linux/mfd/menelaus.h b/include/linux/mfd/menelaus.h new file mode 100644 index 00000000000..f097e89134c --- /dev/null +++ b/include/linux/mfd/menelaus.h @@ -0,0 +1,47 @@ +/* + * Functions to access Menelaus power management chip + */ + +#ifndef __ASM_ARCH_MENELAUS_H +#define __ASM_ARCH_MENELAUS_H + +struct device; + +struct menelaus_platform_data { + int (* late_init)(struct device *dev); +}; + +extern int menelaus_register_mmc_callback(void (*callback)(void *data, u8 card_mask), + void *data); +extern void menelaus_unregister_mmc_callback(void); +extern int menelaus_set_mmc_opendrain(int slot, int enable); +extern int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_on); + +extern int menelaus_set_vmem(unsigned int mV); +extern int menelaus_set_vio(unsigned int mV); +extern int menelaus_set_vmmc(unsigned int mV); +extern int menelaus_set_vaux(unsigned int mV); +extern int menelaus_set_vdcdc(int dcdc, unsigned int mV); +extern int menelaus_set_slot_sel(int enable); +extern int menelaus_get_slot_pin_states(void); +extern int menelaus_set_vcore_sw(unsigned int mV); +extern int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV); + +#define EN_VPLL_SLEEP (1 << 7) +#define EN_VMMC_SLEEP (1 << 6) +#define EN_VAUX_SLEEP (1 << 5) +#define EN_VIO_SLEEP (1 << 4) +#define EN_VMEM_SLEEP (1 << 3) +#define EN_DC3_SLEEP (1 << 2) +#define EN_DC2_SLEEP (1 << 1) +#define EN_VC_SLEEP (1 << 0) + +extern int menelaus_set_regulator_sleep(int enable, u32 val); + +#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_MENELAUS) +#define omap_has_menelaus() 1 +#else +#define omap_has_menelaus() 0 +#endif + +#endif diff --git a/include/linux/mfd/pm8xxx/irq.h b/include/linux/mfd/pm8xxx/irq.h index 4b21769f448..f83d6b43ecb 100644 --- a/include/linux/mfd/pm8xxx/irq.h +++ b/include/linux/mfd/pm8xxx/irq.h @@ -37,21 +37,21 @@ struct pm_irq_chip; #ifdef CONFIG_MFD_PM8XXX_IRQ int pm8xxx_get_irq_stat(struct pm_irq_chip *chip, int irq); -struct pm_irq_chip * __devinit pm8xxx_irq_init(struct device *dev, +struct pm_irq_chip *pm8xxx_irq_init(struct device *dev, const struct pm8xxx_irq_platform_data *pdata); -int __devexit pm8xxx_irq_exit(struct pm_irq_chip *chip); +int pm8xxx_irq_exit(struct pm_irq_chip *chip); #else static inline int pm8xxx_get_irq_stat(struct pm_irq_chip *chip, int irq) { return -ENXIO; } -static inline struct pm_irq_chip * __devinit pm8xxx_irq_init( +static inline struct pm_irq_chip *pm8xxx_irq_init( const struct device *dev, const struct pm8xxx_irq_platform_data *pdata) { return ERR_PTR(-ENXIO); } -static inline int __devexit pm8xxx_irq_exit(struct pm_irq_chip *chip) +static inline int pm8xxx_irq_exit(struct pm_irq_chip *chip) { return -ENXIO; } diff --git a/include/linux/mfd/rc5t583.h b/include/linux/mfd/rc5t583.h index 36c242e52ef..fd413ccab91 100644 --- a/include/linux/mfd/rc5t583.h +++ b/include/linux/mfd/rc5t583.h @@ -33,6 +33,7 @@ /* Maximum number of main interrupts */ #define MAX_MAIN_INTERRUPT 5 #define RC5T583_MAX_GPEDGE_REG 2 +#define RC5T583_MAX_INTERRUPT_EN_REGS 8 #define RC5T583_MAX_INTERRUPT_MASK_REGS 9 /* Interrupt enable register */ @@ -304,7 +305,7 @@ struct rc5t583 { uint8_t intc_inten_reg; /* For group interrupt bits and address */ - uint8_t irq_en_reg[RC5T583_MAX_INTERRUPT_MASK_REGS]; + uint8_t irq_en_reg[RC5T583_MAX_INTERRUPT_EN_REGS]; /* For gpio edge */ uint8_t gpedge_reg[RC5T583_MAX_GPEDGE_REG]; diff --git a/include/linux/mfd/retu.h b/include/linux/mfd/retu.h new file mode 100644 index 00000000000..1e2715d5b83 --- /dev/null +++ b/include/linux/mfd/retu.h @@ -0,0 +1,22 @@ +/* + * Retu MFD driver interface + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + */ + +#ifndef __LINUX_MFD_RETU_H +#define __LINUX_MFD_RETU_H + +struct retu_dev; + +int retu_read(struct retu_dev *, u8); +int retu_write(struct retu_dev *, u8, u16); + +/* Registers */ +#define RETU_REG_WATCHDOG 0x17 /* Watchdog */ +#define RETU_REG_CC1 0x0d /* Common control register 1 */ +#define RETU_REG_STATUS 0x16 /* Status register */ + +#endif /* __LINUX_MFD_RETU_H */ diff --git a/include/linux/mfd/rtsx_common.h b/include/linux/mfd/rtsx_common.h new file mode 100644 index 00000000000..2b13970596f --- /dev/null +++ b/include/linux/mfd/rtsx_common.h @@ -0,0 +1,51 @@ +/* Driver for Realtek driver-based card reader + * + * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + * + * Author: + * Wei WANG <wei_wang@realsil.com.cn> + * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China + */ + +#ifndef __RTSX_COMMON_H +#define __RTSX_COMMON_H + +#define DRV_NAME_RTSX_PCI "rtsx_pci" +#define DRV_NAME_RTSX_PCI_SDMMC "rtsx_pci_sdmmc" +#define DRV_NAME_RTSX_PCI_MS "rtsx_pci_ms" + +#define RTSX_REG_PAIR(addr, val) (((u32)(addr) << 16) | (u8)(val)) + +#define RTSX_SSC_DEPTH_4M 0x01 +#define RTSX_SSC_DEPTH_2M 0x02 +#define RTSX_SSC_DEPTH_1M 0x03 +#define RTSX_SSC_DEPTH_500K 0x04 +#define RTSX_SSC_DEPTH_250K 0x05 + +#define RTSX_SD_CARD 0 +#define RTSX_MS_CARD 1 + +#define CLK_TO_DIV_N 0 +#define DIV_N_TO_CLK 1 + +struct platform_device; + +struct rtsx_slot { + struct platform_device *p_dev; + void (*card_event)(struct platform_device *p_dev); +}; + +#endif diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h new file mode 100644 index 00000000000..4b117a3f54d --- /dev/null +++ b/include/linux/mfd/rtsx_pci.h @@ -0,0 +1,811 @@ +/* Driver for Realtek PCI-Express card reader + * + * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + * + * Author: + * Wei WANG <wei_wang@realsil.com.cn> + * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China + */ + +#ifndef __RTSX_PCI_H +#define __RTSX_PCI_H + +#include <linux/sched.h> +#include <linux/pci.h> + +#include "rtsx_common.h" + +#define MAX_RW_REG_CNT 1024 + +/* PCI Operation Register Address */ +#define RTSX_HCBAR 0x00 +#define RTSX_HCBCTLR 0x04 +#define RTSX_HDBAR 0x08 +#define RTSX_HDBCTLR 0x0C +#define RTSX_HAIMR 0x10 +#define RTSX_BIPR 0x14 +#define RTSX_BIER 0x18 + +/* Host command buffer control register */ +#define STOP_CMD (0x01 << 28) + +/* Host data buffer control register */ +#define SDMA_MODE 0x00 +#define ADMA_MODE (0x02 << 26) +#define STOP_DMA (0x01 << 28) +#define TRIG_DMA (0x01 << 31) + +/* Host access internal memory register */ +#define HAIMR_TRANS_START (0x01 << 31) +#define HAIMR_READ 0x00 +#define HAIMR_WRITE (0x01 << 30) +#define HAIMR_READ_START (HAIMR_TRANS_START | HAIMR_READ) +#define HAIMR_WRITE_START (HAIMR_TRANS_START | HAIMR_WRITE) +#define HAIMR_TRANS_END (HAIMR_TRANS_START) + +/* Bus interrupt pending register */ +#define CMD_DONE_INT (1 << 31) +#define DATA_DONE_INT (1 << 30) +#define TRANS_OK_INT (1 << 29) +#define TRANS_FAIL_INT (1 << 28) +#define XD_INT (1 << 27) +#define MS_INT (1 << 26) +#define SD_INT (1 << 25) +#define GPIO0_INT (1 << 24) +#define OC_INT (1 << 23) +#define SD_WRITE_PROTECT (1 << 19) +#define XD_EXIST (1 << 18) +#define MS_EXIST (1 << 17) +#define SD_EXIST (1 << 16) +#define DELINK_INT GPIO0_INT +#define MS_OC_INT (1 << 23) +#define SD_OC_INT (1 << 22) + +#define CARD_INT (XD_INT | MS_INT | SD_INT) +#define NEED_COMPLETE_INT (DATA_DONE_INT | TRANS_OK_INT | TRANS_FAIL_INT) +#define RTSX_INT (CMD_DONE_INT | NEED_COMPLETE_INT | \ + CARD_INT | GPIO0_INT | OC_INT) + +#define CARD_EXIST (XD_EXIST | MS_EXIST | SD_EXIST) + +/* Bus interrupt enable register */ +#define CMD_DONE_INT_EN (1 << 31) +#define DATA_DONE_INT_EN (1 << 30) +#define TRANS_OK_INT_EN (1 << 29) +#define TRANS_FAIL_INT_EN (1 << 28) +#define XD_INT_EN (1 << 27) +#define MS_INT_EN (1 << 26) +#define SD_INT_EN (1 << 25) +#define GPIO0_INT_EN (1 << 24) +#define OC_INT_EN (1 << 23) +#define DELINK_INT_EN GPIO0_INT_EN +#define MS_OC_INT_EN (1 << 23) +#define SD_OC_INT_EN (1 << 22) + +#define READ_REG_CMD 0 +#define WRITE_REG_CMD 1 +#define CHECK_REG_CMD 2 + +/* + * macros for easy use + */ +#define rtsx_pci_writel(pcr, reg, value) \ + iowrite32(value, (pcr)->remap_addr + reg) +#define rtsx_pci_readl(pcr, reg) \ + ioread32((pcr)->remap_addr + reg) +#define rtsx_pci_writew(pcr, reg, value) \ + iowrite16(value, (pcr)->remap_addr + reg) +#define rtsx_pci_readw(pcr, reg) \ + ioread16((pcr)->remap_addr + reg) +#define rtsx_pci_writeb(pcr, reg, value) \ + iowrite8(value, (pcr)->remap_addr + reg) +#define rtsx_pci_readb(pcr, reg) \ + ioread8((pcr)->remap_addr + reg) + +#define rtsx_pci_read_config_byte(pcr, where, val) \ + pci_read_config_byte((pcr)->pci, where, val) + +#define rtsx_pci_write_config_byte(pcr, where, val) \ + pci_write_config_byte((pcr)->pci, where, val) + +#define rtsx_pci_read_config_dword(pcr, where, val) \ + pci_read_config_dword((pcr)->pci, where, val) + +#define rtsx_pci_write_config_dword(pcr, where, val) \ + pci_write_config_dword((pcr)->pci, where, val) + +#define STATE_TRANS_NONE 0 +#define STATE_TRANS_CMD 1 +#define STATE_TRANS_BUF 2 +#define STATE_TRANS_SG 3 + +#define TRANS_NOT_READY 0 +#define TRANS_RESULT_OK 1 +#define TRANS_RESULT_FAIL 2 +#define TRANS_NO_DEVICE 3 + +#define RTSX_RESV_BUF_LEN 4096 +#define HOST_CMDS_BUF_LEN 1024 +#define HOST_SG_TBL_BUF_LEN (RTSX_RESV_BUF_LEN - HOST_CMDS_BUF_LEN) +#define HOST_SG_TBL_ITEMS (HOST_SG_TBL_BUF_LEN / 8) +#define MAX_SG_ITEM_LEN 0x80000 + +#define HOST_TO_DEVICE 0 +#define DEVICE_TO_HOST 1 + +#define MAX_PHASE 31 +#define RX_TUNING_CNT 3 + +/* SG descriptor */ +#define SG_INT 0x04 +#define SG_END 0x02 +#define SG_VALID 0x01 + +#define SG_NO_OP 0x00 +#define SG_TRANS_DATA (0x02 << 4) +#define SG_LINK_DESC (0x03 << 4) + +/* Output voltage */ +#define OUTPUT_3V3 0 +#define OUTPUT_1V8 1 + +/* Card Clock Enable Register */ +#define SD_CLK_EN 0x04 +#define MS_CLK_EN 0x08 + +/* Card Select Register */ +#define SD_MOD_SEL 2 +#define MS_MOD_SEL 3 + +/* Card Output Enable Register */ +#define SD_OUTPUT_EN 0x04 +#define MS_OUTPUT_EN 0x08 + +/* CARD_SHARE_MODE */ +#define CARD_SHARE_MASK 0x0F +#define CARD_SHARE_MULTI_LUN 0x00 +#define CARD_SHARE_NORMAL 0x00 +#define CARD_SHARE_48_SD 0x04 +#define CARD_SHARE_48_MS 0x08 +/* CARD_SHARE_MODE for barossa */ +#define CARD_SHARE_BAROSSA_SD 0x01 +#define CARD_SHARE_BAROSSA_MS 0x02 + +/* SD30_DRIVE_SEL */ +#define DRIVER_TYPE_A 0x05 +#define DRIVER_TYPE_B 0x03 +#define DRIVER_TYPE_C 0x02 +#define DRIVER_TYPE_D 0x01 + +/* FPDCTL */ +#define SSC_POWER_DOWN 0x01 +#define SD_OC_POWER_DOWN 0x02 +#define ALL_POWER_DOWN 0x07 +#define OC_POWER_DOWN 0x06 + +/* CLK_CTL */ +#define CHANGE_CLK 0x01 + +/* LDO_CTL */ +#define BPP_ASIC_1V7 0x00 +#define BPP_ASIC_1V8 0x01 +#define BPP_ASIC_1V9 0x02 +#define BPP_ASIC_2V0 0x03 +#define BPP_ASIC_2V7 0x04 +#define BPP_ASIC_2V8 0x05 +#define BPP_ASIC_3V2 0x06 +#define BPP_ASIC_3V3 0x07 +#define BPP_REG_TUNED18 0x07 +#define BPP_TUNED18_SHIFT_8402 5 +#define BPP_TUNED18_SHIFT_8411 4 +#define BPP_PAD_MASK 0x04 +#define BPP_PAD_3V3 0x04 +#define BPP_PAD_1V8 0x00 +#define BPP_LDO_POWB 0x03 +#define BPP_LDO_ON 0x00 +#define BPP_LDO_SUSPEND 0x02 +#define BPP_LDO_OFF 0x03 + +/* CD_PAD_CTL */ +#define CD_DISABLE_MASK 0x07 +#define MS_CD_DISABLE 0x04 +#define SD_CD_DISABLE 0x02 +#define XD_CD_DISABLE 0x01 +#define CD_DISABLE 0x07 +#define CD_ENABLE 0x00 +#define MS_CD_EN_ONLY 0x03 +#define SD_CD_EN_ONLY 0x05 +#define XD_CD_EN_ONLY 0x06 +#define FORCE_CD_LOW_MASK 0x38 +#define FORCE_CD_XD_LOW 0x08 +#define FORCE_CD_SD_LOW 0x10 +#define FORCE_CD_MS_LOW 0x20 +#define CD_AUTO_DISABLE 0x40 + +/* SD_STAT1 */ +#define SD_CRC7_ERR 0x80 +#define SD_CRC16_ERR 0x40 +#define SD_CRC_WRITE_ERR 0x20 +#define SD_CRC_WRITE_ERR_MASK 0x1C +#define GET_CRC_TIME_OUT 0x02 +#define SD_TUNING_COMPARE_ERR 0x01 + +/* SD_STAT2 */ +#define SD_RSP_80CLK_TIMEOUT 0x01 + +/* SD_BUS_STAT */ +#define SD_CLK_TOGGLE_EN 0x80 +#define SD_CLK_FORCE_STOP 0x40 +#define SD_DAT3_STATUS 0x10 +#define SD_DAT2_STATUS 0x08 +#define SD_DAT1_STATUS 0x04 +#define SD_DAT0_STATUS 0x02 +#define SD_CMD_STATUS 0x01 + +/* SD_PAD_CTL */ +#define SD_IO_USING_1V8 0x80 +#define SD_IO_USING_3V3 0x7F +#define TYPE_A_DRIVING 0x00 +#define TYPE_B_DRIVING 0x01 +#define TYPE_C_DRIVING 0x02 +#define TYPE_D_DRIVING 0x03 + +/* SD_SAMPLE_POINT_CTL */ +#define DDR_FIX_RX_DAT 0x00 +#define DDR_VAR_RX_DAT 0x80 +#define DDR_FIX_RX_DAT_EDGE 0x00 +#define DDR_FIX_RX_DAT_14_DELAY 0x40 +#define DDR_FIX_RX_CMD 0x00 +#define DDR_VAR_RX_CMD 0x20 +#define DDR_FIX_RX_CMD_POS_EDGE 0x00 +#define DDR_FIX_RX_CMD_14_DELAY 0x10 +#define SD20_RX_POS_EDGE 0x00 +#define SD20_RX_14_DELAY 0x08 +#define SD20_RX_SEL_MASK 0x08 + +/* SD_PUSH_POINT_CTL */ +#define DDR_FIX_TX_CMD_DAT 0x00 +#define DDR_VAR_TX_CMD_DAT 0x80 +#define DDR_FIX_TX_DAT_14_TSU 0x00 +#define DDR_FIX_TX_DAT_12_TSU 0x40 +#define DDR_FIX_TX_CMD_NEG_EDGE 0x00 +#define DDR_FIX_TX_CMD_14_AHEAD 0x20 +#define SD20_TX_NEG_EDGE 0x00 +#define SD20_TX_14_AHEAD 0x10 +#define SD20_TX_SEL_MASK 0x10 +#define DDR_VAR_SDCLK_POL_SWAP 0x01 + +/* SD_TRANSFER */ +#define SD_TRANSFER_START 0x80 +#define SD_TRANSFER_END 0x40 +#define SD_STAT_IDLE 0x20 +#define SD_TRANSFER_ERR 0x10 +/* SD Transfer Mode definition */ +#define SD_TM_NORMAL_WRITE 0x00 +#define SD_TM_AUTO_WRITE_3 0x01 +#define SD_TM_AUTO_WRITE_4 0x02 +#define SD_TM_AUTO_READ_3 0x05 +#define SD_TM_AUTO_READ_4 0x06 +#define SD_TM_CMD_RSP 0x08 +#define SD_TM_AUTO_WRITE_1 0x09 +#define SD_TM_AUTO_WRITE_2 0x0A +#define SD_TM_NORMAL_READ 0x0C +#define SD_TM_AUTO_READ_1 0x0D +#define SD_TM_AUTO_READ_2 0x0E +#define SD_TM_AUTO_TUNING 0x0F + +/* SD_VPTX_CTL / SD_VPRX_CTL */ +#define PHASE_CHANGE 0x80 +#define PHASE_NOT_RESET 0x40 + +/* SD_DCMPS_TX_CTL / SD_DCMPS_RX_CTL */ +#define DCMPS_CHANGE 0x80 +#define DCMPS_CHANGE_DONE 0x40 +#define DCMPS_ERROR 0x20 +#define DCMPS_CURRENT_PHASE 0x1F + +/* SD Configure 1 Register */ +#define SD_CLK_DIVIDE_0 0x00 +#define SD_CLK_DIVIDE_256 0xC0 +#define SD_CLK_DIVIDE_128 0x80 +#define SD_BUS_WIDTH_1BIT 0x00 +#define SD_BUS_WIDTH_4BIT 0x01 +#define SD_BUS_WIDTH_8BIT 0x02 +#define SD_ASYNC_FIFO_NOT_RST 0x10 +#define SD_20_MODE 0x00 +#define SD_DDR_MODE 0x04 +#define SD_30_MODE 0x08 + +#define SD_CLK_DIVIDE_MASK 0xC0 + +/* SD_CMD_STATE */ +#define SD_CMD_IDLE 0x80 + +/* SD_DATA_STATE */ +#define SD_DATA_IDLE 0x80 + +/* DCM_DRP_CTL */ +#define DCM_RESET 0x08 +#define DCM_LOCKED 0x04 +#define DCM_208M 0x00 +#define DCM_TX 0x01 +#define DCM_RX 0x02 + +/* DCM_DRP_TRIG */ +#define DRP_START 0x80 +#define DRP_DONE 0x40 + +/* DCM_DRP_CFG */ +#define DRP_WRITE 0x80 +#define DRP_READ 0x00 +#define DCM_WRITE_ADDRESS_50 0x50 +#define DCM_WRITE_ADDRESS_51 0x51 +#define DCM_READ_ADDRESS_00 0x00 +#define DCM_READ_ADDRESS_51 0x51 + +/* IRQSTAT0 */ +#define DMA_DONE_INT 0x80 +#define SUSPEND_INT 0x40 +#define LINK_RDY_INT 0x20 +#define LINK_DOWN_INT 0x10 + +/* DMACTL */ +#define DMA_RST 0x80 +#define DMA_BUSY 0x04 +#define DMA_DIR_TO_CARD 0x00 +#define DMA_DIR_FROM_CARD 0x02 +#define DMA_EN 0x01 +#define DMA_128 (0 << 4) +#define DMA_256 (1 << 4) +#define DMA_512 (2 << 4) +#define DMA_1024 (3 << 4) +#define DMA_PACK_SIZE_MASK 0x30 + +/* SSC_CTL1 */ +#define SSC_RSTB 0x80 +#define SSC_8X_EN 0x40 +#define SSC_FIX_FRAC 0x20 +#define SSC_SEL_1M 0x00 +#define SSC_SEL_2M 0x08 +#define SSC_SEL_4M 0x10 +#define SSC_SEL_8M 0x18 + +/* SSC_CTL2 */ +#define SSC_DEPTH_MASK 0x07 +#define SSC_DEPTH_DISALBE 0x00 +#define SSC_DEPTH_4M 0x01 +#define SSC_DEPTH_2M 0x02 +#define SSC_DEPTH_1M 0x03 +#define SSC_DEPTH_500K 0x04 +#define SSC_DEPTH_250K 0x05 + +/* System Clock Control Register */ +#define CLK_LOW_FREQ 0x01 + +/* System Clock Divider Register */ +#define CLK_DIV_1 0x01 +#define CLK_DIV_2 0x02 +#define CLK_DIV_4 0x03 +#define CLK_DIV_8 0x04 + +/* MS_CFG */ +#define SAMPLE_TIME_RISING 0x00 +#define SAMPLE_TIME_FALLING 0x80 +#define PUSH_TIME_DEFAULT 0x00 +#define PUSH_TIME_ODD 0x40 +#define NO_EXTEND_TOGGLE 0x00 +#define EXTEND_TOGGLE_CHK 0x20 +#define MS_BUS_WIDTH_1 0x00 +#define MS_BUS_WIDTH_4 0x10 +#define MS_BUS_WIDTH_8 0x18 +#define MS_2K_SECTOR_MODE 0x04 +#define MS_512_SECTOR_MODE 0x00 +#define MS_TOGGLE_TIMEOUT_EN 0x00 +#define MS_TOGGLE_TIMEOUT_DISEN 0x01 +#define MS_NO_CHECK_INT 0x02 + +/* MS_TRANS_CFG */ +#define WAIT_INT 0x80 +#define NO_WAIT_INT 0x00 +#define NO_AUTO_READ_INT_REG 0x00 +#define AUTO_READ_INT_REG 0x40 +#define MS_CRC16_ERR 0x20 +#define MS_RDY_TIMEOUT 0x10 +#define MS_INT_CMDNK 0x08 +#define MS_INT_BREQ 0x04 +#define MS_INT_ERR 0x02 +#define MS_INT_CED 0x01 + +/* MS_TRANSFER */ +#define MS_TRANSFER_START 0x80 +#define MS_TRANSFER_END 0x40 +#define MS_TRANSFER_ERR 0x20 +#define MS_BS_STATE 0x10 +#define MS_TM_READ_BYTES 0x00 +#define MS_TM_NORMAL_READ 0x01 +#define MS_TM_WRITE_BYTES 0x04 +#define MS_TM_NORMAL_WRITE 0x05 +#define MS_TM_AUTO_READ 0x08 +#define MS_TM_AUTO_WRITE 0x0C + +/* SD Configure 2 Register */ +#define SD_CALCULATE_CRC7 0x00 +#define SD_NO_CALCULATE_CRC7 0x80 +#define SD_CHECK_CRC16 0x00 +#define SD_NO_CHECK_CRC16 0x40 +#define SD_NO_CHECK_WAIT_CRC_TO 0x20 +#define SD_WAIT_BUSY_END 0x08 +#define SD_NO_WAIT_BUSY_END 0x00 +#define SD_CHECK_CRC7 0x00 +#define SD_NO_CHECK_CRC7 0x04 +#define SD_RSP_LEN_0 0x00 +#define SD_RSP_LEN_6 0x01 +#define SD_RSP_LEN_17 0x02 +/* SD/MMC Response Type Definition */ +#define SD_RSP_TYPE_R0 0x04 +#define SD_RSP_TYPE_R1 0x01 +#define SD_RSP_TYPE_R1b 0x09 +#define SD_RSP_TYPE_R2 0x02 +#define SD_RSP_TYPE_R3 0x05 +#define SD_RSP_TYPE_R4 0x05 +#define SD_RSP_TYPE_R5 0x01 +#define SD_RSP_TYPE_R6 0x01 +#define SD_RSP_TYPE_R7 0x01 + +/* SD_CONFIURE3 */ +#define SD_RSP_80CLK_TIMEOUT_EN 0x01 + +/* Card Transfer Reset Register */ +#define SPI_STOP 0x01 +#define XD_STOP 0x02 +#define SD_STOP 0x04 +#define MS_STOP 0x08 +#define SPI_CLR_ERR 0x10 +#define XD_CLR_ERR 0x20 +#define SD_CLR_ERR 0x40 +#define MS_CLR_ERR 0x80 + +/* Card Data Source Register */ +#define PINGPONG_BUFFER 0x01 +#define RING_BUFFER 0x00 + +/* Card Power Control Register */ +#define PMOS_STRG_MASK 0x10 +#define PMOS_STRG_800mA 0x10 +#define PMOS_STRG_400mA 0x00 +#define SD_POWER_OFF 0x03 +#define SD_PARTIAL_POWER_ON 0x01 +#define SD_POWER_ON 0x00 +#define SD_POWER_MASK 0x03 +#define MS_POWER_OFF 0x0C +#define MS_PARTIAL_POWER_ON 0x04 +#define MS_POWER_ON 0x00 +#define MS_POWER_MASK 0x0C +#define BPP_POWER_OFF 0x0F +#define BPP_POWER_5_PERCENT_ON 0x0E +#define BPP_POWER_10_PERCENT_ON 0x0C +#define BPP_POWER_15_PERCENT_ON 0x08 +#define BPP_POWER_ON 0x00 +#define BPP_POWER_MASK 0x0F + +/* PWR_GATE_CTRL */ +#define PWR_GATE_EN 0x01 +#define LDO3318_PWR_MASK 0x06 +#define LDO_ON 0x00 +#define LDO_SUSPEND 0x04 +#define LDO_OFF 0x06 + +/* CARD_CLK_SOURCE */ +#define CRC_FIX_CLK (0x00 << 0) +#define CRC_VAR_CLK0 (0x01 << 0) +#define CRC_VAR_CLK1 (0x02 << 0) +#define SD30_FIX_CLK (0x00 << 2) +#define SD30_VAR_CLK0 (0x01 << 2) +#define SD30_VAR_CLK1 (0x02 << 2) +#define SAMPLE_FIX_CLK (0x00 << 4) +#define SAMPLE_VAR_CLK0 (0x01 << 4) +#define SAMPLE_VAR_CLK1 (0x02 << 4) + +#define MS_CFG 0xFD40 +#define MS_TPC 0xFD41 +#define MS_TRANS_CFG 0xFD42 +#define MS_TRANSFER 0xFD43 +#define MS_INT_REG 0xFD44 +#define MS_BYTE_CNT 0xFD45 +#define MS_SECTOR_CNT_L 0xFD46 +#define MS_SECTOR_CNT_H 0xFD47 +#define MS_DBUS_H 0xFD48 + +#define SD_CFG1 0xFDA0 +#define SD_CFG2 0xFDA1 +#define SD_CFG3 0xFDA2 +#define SD_STAT1 0xFDA3 +#define SD_STAT2 0xFDA4 +#define SD_BUS_STAT 0xFDA5 +#define SD_PAD_CTL 0xFDA6 +#define SD_SAMPLE_POINT_CTL 0xFDA7 +#define SD_PUSH_POINT_CTL 0xFDA8 +#define SD_CMD0 0xFDA9 +#define SD_CMD1 0xFDAA +#define SD_CMD2 0xFDAB +#define SD_CMD3 0xFDAC +#define SD_CMD4 0xFDAD +#define SD_CMD5 0xFDAE +#define SD_BYTE_CNT_L 0xFDAF +#define SD_BYTE_CNT_H 0xFDB0 +#define SD_BLOCK_CNT_L 0xFDB1 +#define SD_BLOCK_CNT_H 0xFDB2 +#define SD_TRANSFER 0xFDB3 +#define SD_CMD_STATE 0xFDB5 +#define SD_DATA_STATE 0xFDB6 + +#define SRCTL 0xFC13 + +#define DCM_DRP_CTL 0xFC23 +#define DCM_DRP_TRIG 0xFC24 +#define DCM_DRP_CFG 0xFC25 +#define DCM_DRP_WR_DATA_L 0xFC26 +#define DCM_DRP_WR_DATA_H 0xFC27 +#define DCM_DRP_RD_DATA_L 0xFC28 +#define DCM_DRP_RD_DATA_H 0xFC29 +#define SD_VPCLK0_CTL 0xFC2A +#define SD_VPCLK1_CTL 0xFC2B +#define SD_DCMPS0_CTL 0xFC2C +#define SD_DCMPS1_CTL 0xFC2D +#define SD_VPTX_CTL SD_VPCLK0_CTL +#define SD_VPRX_CTL SD_VPCLK1_CTL +#define SD_DCMPS_TX_CTL SD_DCMPS0_CTL +#define SD_DCMPS_RX_CTL SD_DCMPS1_CTL +#define CARD_CLK_SOURCE 0xFC2E + +#define CARD_PWR_CTL 0xFD50 +#define CARD_CLK_SWITCH 0xFD51 +#define CARD_SHARE_MODE 0xFD52 +#define CARD_DRIVE_SEL 0xFD53 +#define CARD_STOP 0xFD54 +#define CARD_OE 0xFD55 +#define CARD_AUTO_BLINK 0xFD56 +#define CARD_GPIO_DIR 0xFD57 +#define CARD_GPIO 0xFD58 +#define CARD_DATA_SOURCE 0xFD5B +#define CARD_SELECT 0xFD5C +#define SD30_DRIVE_SEL 0xFD5E +#define CARD_CLK_EN 0xFD69 +#define SDIO_CTRL 0xFD6B +#define CD_PAD_CTL 0xFD73 + +#define FPDCTL 0xFC00 +#define PDINFO 0xFC01 + +#define CLK_CTL 0xFC02 +#define CLK_DIV 0xFC03 +#define CLK_SEL 0xFC04 + +#define SSC_DIV_N_0 0xFC0F +#define SSC_DIV_N_1 0xFC10 +#define SSC_CTL1 0xFC11 +#define SSC_CTL2 0xFC12 + +#define RCCTL 0xFC14 + +#define FPGA_PULL_CTL 0xFC1D +#define OLT_LED_CTL 0xFC1E +#define GPIO_CTL 0xFC1F + +#define LDO_CTL 0xFC1E +#define SYS_VER 0xFC32 + +#define CARD_PULL_CTL1 0xFD60 +#define CARD_PULL_CTL2 0xFD61 +#define CARD_PULL_CTL3 0xFD62 +#define CARD_PULL_CTL4 0xFD63 +#define CARD_PULL_CTL5 0xFD64 +#define CARD_PULL_CTL6 0xFD65 + +/* PCI Express Related Registers */ +#define IRQEN0 0xFE20 +#define IRQSTAT0 0xFE21 +#define IRQEN1 0xFE22 +#define IRQSTAT1 0xFE23 +#define TLPRIEN 0xFE24 +#define TLPRISTAT 0xFE25 +#define TLPTIEN 0xFE26 +#define TLPTISTAT 0xFE27 +#define DMATC0 0xFE28 +#define DMATC1 0xFE29 +#define DMATC2 0xFE2A +#define DMATC3 0xFE2B +#define DMACTL 0xFE2C +#define BCTL 0xFE2D +#define RBBC0 0xFE2E +#define RBBC1 0xFE2F +#define RBDAT 0xFE30 +#define RBCTL 0xFE34 +#define CFGADDR0 0xFE35 +#define CFGADDR1 0xFE36 +#define CFGDATA0 0xFE37 +#define CFGDATA1 0xFE38 +#define CFGDATA2 0xFE39 +#define CFGDATA3 0xFE3A +#define CFGRWCTL 0xFE3B +#define PHYRWCTL 0xFE3C +#define PHYDATA0 0xFE3D +#define PHYDATA1 0xFE3E +#define PHYADDR 0xFE3F +#define MSGRXDATA0 0xFE40 +#define MSGRXDATA1 0xFE41 +#define MSGRXDATA2 0xFE42 +#define MSGRXDATA3 0xFE43 +#define MSGTXDATA0 0xFE44 +#define MSGTXDATA1 0xFE45 +#define MSGTXDATA2 0xFE46 +#define MSGTXDATA3 0xFE47 +#define MSGTXCTL 0xFE48 +#define PETXCFG 0xFE49 + +#define CDRESUMECTL 0xFE52 +#define WAKE_SEL_CTL 0xFE54 +#define PME_FORCE_CTL 0xFE56 +#define ASPM_FORCE_CTL 0xFE57 +#define PM_CLK_FORCE_CTL 0xFE58 +#define PERST_GLITCH_WIDTH 0xFE5C +#define CHANGE_LINK_STATE 0xFE5B +#define RESET_LOAD_REG 0xFE5E +#define EFUSE_CONTENT 0xFE5F +#define HOST_SLEEP_STATE 0xFE60 +#define SDIO_CFG 0xFE70 + +#define NFTS_TX_CTRL 0xFE72 + +#define PWR_GATE_CTRL 0xFE75 +#define PWD_SUSPEND_EN 0xFE76 +#define LDO_PWR_SEL 0xFE78 + +#define DUMMY_REG_RESET_0 0xFE90 + +/* Memory mapping */ +#define SRAM_BASE 0xE600 +#define RBUF_BASE 0xF400 +#define PPBUF_BASE1 0xF800 +#define PPBUF_BASE2 0xFA00 +#define IMAGE_FLAG_ADDR0 0xCE80 +#define IMAGE_FLAG_ADDR1 0xCE81 + +#define rtsx_pci_init_cmd(pcr) ((pcr)->ci = 0) + +struct rtsx_pcr; + +struct pcr_handle { + struct rtsx_pcr *pcr; +}; + +struct pcr_ops { + int (*extra_init_hw)(struct rtsx_pcr *pcr); + int (*optimize_phy)(struct rtsx_pcr *pcr); + int (*turn_on_led)(struct rtsx_pcr *pcr); + int (*turn_off_led)(struct rtsx_pcr *pcr); + int (*enable_auto_blink)(struct rtsx_pcr *pcr); + int (*disable_auto_blink)(struct rtsx_pcr *pcr); + int (*card_power_on)(struct rtsx_pcr *pcr, int card); + int (*card_power_off)(struct rtsx_pcr *pcr, int card); + int (*switch_output_voltage)(struct rtsx_pcr *pcr, + u8 voltage); + unsigned int (*cd_deglitch)(struct rtsx_pcr *pcr); + int (*conv_clk_and_div_n)(int clk, int dir); +}; + +enum PDEV_STAT {PDEV_STAT_IDLE, PDEV_STAT_RUN}; + +struct rtsx_pcr { + struct pci_dev *pci; + unsigned int id; + + /* pci resources */ + unsigned long addr; + void __iomem *remap_addr; + int irq; + + /* host reserved buffer */ + void *rtsx_resv_buf; + dma_addr_t rtsx_resv_buf_addr; + + void *host_cmds_ptr; + dma_addr_t host_cmds_addr; + int ci; + + void *host_sg_tbl_ptr; + dma_addr_t host_sg_tbl_addr; + int sgi; + + u32 bier; + char trans_result; + + unsigned int card_inserted; + unsigned int card_removed; + + struct delayed_work carddet_work; + struct delayed_work idle_work; + + spinlock_t lock; + struct mutex pcr_mutex; + struct completion *done; + struct completion *finish_me; + + unsigned int cur_clock; + bool ms_pmos; + bool remove_pci; + bool msi_en; + +#define EXTRA_CAPS_SD_SDR50 (1 << 0) +#define EXTRA_CAPS_SD_SDR104 (1 << 1) +#define EXTRA_CAPS_SD_DDR50 (1 << 2) +#define EXTRA_CAPS_MMC_HSDDR (1 << 3) +#define EXTRA_CAPS_MMC_HS200 (1 << 4) +#define EXTRA_CAPS_MMC_8BIT (1 << 5) + u32 extra_caps; + +#define IC_VER_A 0 +#define IC_VER_B 1 +#define IC_VER_C 2 +#define IC_VER_D 3 + u8 ic_version; + + const u32 *sd_pull_ctl_enable_tbl; + const u32 *sd_pull_ctl_disable_tbl; + const u32 *ms_pull_ctl_enable_tbl; + const u32 *ms_pull_ctl_disable_tbl; + + const struct pcr_ops *ops; + enum PDEV_STAT state; + + int num_slots; + struct rtsx_slot *slots; +}; + +#define CHK_PCI_PID(pcr, pid) ((pcr)->pci->device == (pid)) +#define PCI_VID(pcr) ((pcr)->pci->vendor) +#define PCI_PID(pcr) ((pcr)->pci->device) + +void rtsx_pci_start_run(struct rtsx_pcr *pcr); +int rtsx_pci_write_register(struct rtsx_pcr *pcr, u16 addr, u8 mask, u8 data); +int rtsx_pci_read_register(struct rtsx_pcr *pcr, u16 addr, u8 *data); +int rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val); +int rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val); +void rtsx_pci_stop_cmd(struct rtsx_pcr *pcr); +void rtsx_pci_add_cmd(struct rtsx_pcr *pcr, + u8 cmd_type, u16 reg_addr, u8 mask, u8 data); +void rtsx_pci_send_cmd_no_wait(struct rtsx_pcr *pcr); +int rtsx_pci_send_cmd(struct rtsx_pcr *pcr, int timeout); +int rtsx_pci_transfer_data(struct rtsx_pcr *pcr, struct scatterlist *sglist, + int num_sg, bool read, int timeout); +int rtsx_pci_read_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len); +int rtsx_pci_write_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len); +int rtsx_pci_card_pull_ctl_enable(struct rtsx_pcr *pcr, int card); +int rtsx_pci_card_pull_ctl_disable(struct rtsx_pcr *pcr, int card); +int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock, + u8 ssc_depth, bool initial_mode, bool double_clk, bool vpclk); +int rtsx_pci_card_power_on(struct rtsx_pcr *pcr, int card); +int rtsx_pci_card_power_off(struct rtsx_pcr *pcr, int card); +int rtsx_pci_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage); +unsigned int rtsx_pci_card_exist(struct rtsx_pcr *pcr); +void rtsx_pci_complete_unfinished_transfer(struct rtsx_pcr *pcr); + +static inline u8 *rtsx_pci_get_cmd_data(struct rtsx_pcr *pcr) +{ + return (u8 *)(pcr->host_cmds_ptr); +} + +#endif diff --git a/include/linux/mfd/sta2x11-mfd.h b/include/linux/mfd/sta2x11-mfd.h index d179227e866..9a855ac11cb 100644 --- a/include/linux/mfd/sta2x11-mfd.h +++ b/include/linux/mfd/sta2x11-mfd.h @@ -26,6 +26,28 @@ #include <linux/types.h> #include <linux/pci.h> +enum sta2x11_mfd_plat_dev { + sta2x11_sctl = 0, + sta2x11_gpio, + sta2x11_scr, + sta2x11_time, + sta2x11_apbreg, + sta2x11_apb_soc_regs, + sta2x11_vic, + sta2x11_n_mfd_plat_devs, +}; + +#define STA2X11_MFD_SCTL_NAME "sta2x11-sctl" +#define STA2X11_MFD_GPIO_NAME "sta2x11-gpio" +#define STA2X11_MFD_SCR_NAME "sta2x11-scr" +#define STA2X11_MFD_TIME_NAME "sta2x11-time" +#define STA2X11_MFD_APBREG_NAME "sta2x11-apbreg" +#define STA2X11_MFD_APB_SOC_REGS_NAME "sta2x11-apb-soc-regs" +#define STA2X11_MFD_VIC_NAME "sta2x11-vic" + +extern u32 +__sta2x11_mfd_mask(struct pci_dev *, u32, u32, u32, enum sta2x11_mfd_plat_dev); + /* * The MFD PCI block includes the GPIO peripherals and other register blocks. * For GPIO, we have 32*4 bits (I use "gsta" for "gpio sta2x11".) @@ -182,7 +204,11 @@ struct sta2x11_gpio_pdata { * The APB bridge has its own registers, needed by our users as well. * They are accessed with the following read/mask/write function. */ -u32 sta2x11_apbreg_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val); +static inline u32 +sta2x11_apbreg_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val) +{ + return __sta2x11_mfd_mask(pdev, reg, mask, val, sta2x11_apbreg); +} /* CAN and MLB */ #define APBREG_BSR 0x00 /* Bridge Status Reg */ @@ -211,19 +237,45 @@ u32 sta2x11_apbreg_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val); * The system controller has its own registers. Some of these are accessed * by out users as well, using the following read/mask/write/function */ -u32 sta2x11_sctl_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val); +static inline +u32 sta2x11_sctl_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val) +{ + return __sta2x11_mfd_mask(pdev, reg, mask, val, sta2x11_sctl); +} #define SCTL_SCCTL 0x00 /* System controller control register */ #define SCTL_ARMCFG 0x04 /* ARM configuration register */ #define SCTL_SCPLLCTL 0x08 /* PLL control status register */ + +#define SCTL_SCPLLCTL_AUDIO_PLL_PD BIT(1) +#define SCTL_SCPLLCTL_FRAC_CONTROL BIT(3) +#define SCTL_SCPLLCTL_STRB_BYPASS BIT(6) +#define SCTL_SCPLLCTL_STRB_INPUT BIT(8) + #define SCTL_SCPLLFCTRL 0x0c /* PLL frequency control register */ + +#define SCTL_SCPLLFCTRL_AUDIO_PLL_NDIV_MASK 0xff +#define SCTL_SCPLLFCTRL_AUDIO_PLL_NDIV_SHIFT 10 +#define SCTL_SCPLLFCTRL_AUDIO_PLL_IDF_MASK 7 +#define SCTL_SCPLLFCTRL_AUDIO_PLL_IDF_SHIFT 21 +#define SCTL_SCPLLFCTRL_AUDIO_PLL_ODF_MASK 7 +#define SCTL_SCPLLFCTRL_AUDIO_PLL_ODF_SHIFT 18 +#define SCTL_SCPLLFCTRL_DITHER_DISABLE_MASK 0x03 +#define SCTL_SCPLLFCTRL_DITHER_DISABLE_SHIFT 4 + + #define SCTL_SCRESFRACT 0x10 /* PLL fractional input register */ + +#define SCTL_SCRESFRACT_MASK 0x0000ffff + + #define SCTL_SCRESCTRL1 0x14 /* Peripheral reset control 1 */ #define SCTL_SCRESXTRL2 0x18 /* Peripheral reset control 2 */ #define SCTL_SCPEREN0 0x1c /* Peripheral clock enable register 0 */ #define SCTL_SCPEREN1 0x20 /* Peripheral clock enable register 1 */ #define SCTL_SCPEREN2 0x24 /* Peripheral clock enable register 2 */ #define SCTL_SCGRST 0x28 /* Peripheral global reset */ +#define SCTL_SCPCIECSBRST 0x2c /* PCIe PAB CSB reset status register */ #define SCTL_SCPCIPMCR1 0x30 /* PCI power management control 1 */ #define SCTL_SCPCIPMCR2 0x34 /* PCI power management control 2 */ #define SCTL_SCPCIPMSR1 0x38 /* PCI power management status 1 */ @@ -321,4 +373,146 @@ u32 sta2x11_sctl_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val); #define SCTL_SCPEREN1_I2C3 (1 << 16) #define SCTL_SCPEREN1_USB_PHY (1 << 17) +/* + * APB-SOC registers + */ +static inline +u32 sta2x11_apb_soc_regs_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val) +{ + return __sta2x11_mfd_mask(pdev, reg, mask, val, sta2x11_apb_soc_regs); +} + +#define PCIE_EP1_FUNC3_0_INTR_REG 0x000 +#define PCIE_EP1_FUNC7_4_INTR_REG 0x004 +#define PCIE_EP2_FUNC3_0_INTR_REG 0x008 +#define PCIE_EP2_FUNC7_4_INTR_REG 0x00c +#define PCIE_EP3_FUNC3_0_INTR_REG 0x010 +#define PCIE_EP3_FUNC7_4_INTR_REG 0x014 +#define PCIE_EP4_FUNC3_0_INTR_REG 0x018 +#define PCIE_EP4_FUNC7_4_INTR_REG 0x01c +#define PCIE_INTR_ENABLE0_REG 0x020 +#define PCIE_INTR_ENABLE1_REG 0x024 +#define PCIE_EP1_FUNC_TC_REG 0x028 +#define PCIE_EP2_FUNC_TC_REG 0x02c +#define PCIE_EP3_FUNC_TC_REG 0x030 +#define PCIE_EP4_FUNC_TC_REG 0x034 +#define PCIE_EP1_FUNC_F_REG 0x038 +#define PCIE_EP2_FUNC_F_REG 0x03c +#define PCIE_EP3_FUNC_F_REG 0x040 +#define PCIE_EP4_FUNC_F_REG 0x044 +#define PCIE_PAB_AMBA_SW_RST_REG 0x048 +#define PCIE_PM_STATUS_0_PORT_0_4 0x04c +#define PCIE_PM_STATUS_7_0_EP1 0x050 +#define PCIE_PM_STATUS_7_0_EP2 0x054 +#define PCIE_PM_STATUS_7_0_EP3 0x058 +#define PCIE_PM_STATUS_7_0_EP4 0x05c +#define PCIE_DEV_ID_0_EP1_REG 0x060 +#define PCIE_CC_REV_ID_0_EP1_REG 0x064 +#define PCIE_DEV_ID_1_EP1_REG 0x068 +#define PCIE_CC_REV_ID_1_EP1_REG 0x06c +#define PCIE_DEV_ID_2_EP1_REG 0x070 +#define PCIE_CC_REV_ID_2_EP1_REG 0x074 +#define PCIE_DEV_ID_3_EP1_REG 0x078 +#define PCIE_CC_REV_ID_3_EP1_REG 0x07c +#define PCIE_DEV_ID_4_EP1_REG 0x080 +#define PCIE_CC_REV_ID_4_EP1_REG 0x084 +#define PCIE_DEV_ID_5_EP1_REG 0x088 +#define PCIE_CC_REV_ID_5_EP1_REG 0x08c +#define PCIE_DEV_ID_6_EP1_REG 0x090 +#define PCIE_CC_REV_ID_6_EP1_REG 0x094 +#define PCIE_DEV_ID_7_EP1_REG 0x098 +#define PCIE_CC_REV_ID_7_EP1_REG 0x09c +#define PCIE_DEV_ID_0_EP2_REG 0x0a0 +#define PCIE_CC_REV_ID_0_EP2_REG 0x0a4 +#define PCIE_DEV_ID_1_EP2_REG 0x0a8 +#define PCIE_CC_REV_ID_1_EP2_REG 0x0ac +#define PCIE_DEV_ID_2_EP2_REG 0x0b0 +#define PCIE_CC_REV_ID_2_EP2_REG 0x0b4 +#define PCIE_DEV_ID_3_EP2_REG 0x0b8 +#define PCIE_CC_REV_ID_3_EP2_REG 0x0bc +#define PCIE_DEV_ID_4_EP2_REG 0x0c0 +#define PCIE_CC_REV_ID_4_EP2_REG 0x0c4 +#define PCIE_DEV_ID_5_EP2_REG 0x0c8 +#define PCIE_CC_REV_ID_5_EP2_REG 0x0cc +#define PCIE_DEV_ID_6_EP2_REG 0x0d0 +#define PCIE_CC_REV_ID_6_EP2_REG 0x0d4 +#define PCIE_DEV_ID_7_EP2_REG 0x0d8 +#define PCIE_CC_REV_ID_7_EP2_REG 0x0dC +#define PCIE_DEV_ID_0_EP3_REG 0x0e0 +#define PCIE_CC_REV_ID_0_EP3_REG 0x0e4 +#define PCIE_DEV_ID_1_EP3_REG 0x0e8 +#define PCIE_CC_REV_ID_1_EP3_REG 0x0ec +#define PCIE_DEV_ID_2_EP3_REG 0x0f0 +#define PCIE_CC_REV_ID_2_EP3_REG 0x0f4 +#define PCIE_DEV_ID_3_EP3_REG 0x0f8 +#define PCIE_CC_REV_ID_3_EP3_REG 0x0fc +#define PCIE_DEV_ID_4_EP3_REG 0x100 +#define PCIE_CC_REV_ID_4_EP3_REG 0x104 +#define PCIE_DEV_ID_5_EP3_REG 0x108 +#define PCIE_CC_REV_ID_5_EP3_REG 0x10c +#define PCIE_DEV_ID_6_EP3_REG 0x110 +#define PCIE_CC_REV_ID_6_EP3_REG 0x114 +#define PCIE_DEV_ID_7_EP3_REG 0x118 +#define PCIE_CC_REV_ID_7_EP3_REG 0x11c +#define PCIE_DEV_ID_0_EP4_REG 0x120 +#define PCIE_CC_REV_ID_0_EP4_REG 0x124 +#define PCIE_DEV_ID_1_EP4_REG 0x128 +#define PCIE_CC_REV_ID_1_EP4_REG 0x12c +#define PCIE_DEV_ID_2_EP4_REG 0x130 +#define PCIE_CC_REV_ID_2_EP4_REG 0x134 +#define PCIE_DEV_ID_3_EP4_REG 0x138 +#define PCIE_CC_REV_ID_3_EP4_REG 0x13c +#define PCIE_DEV_ID_4_EP4_REG 0x140 +#define PCIE_CC_REV_ID_4_EP4_REG 0x144 +#define PCIE_DEV_ID_5_EP4_REG 0x148 +#define PCIE_CC_REV_ID_5_EP4_REG 0x14c +#define PCIE_DEV_ID_6_EP4_REG 0x150 +#define PCIE_CC_REV_ID_6_EP4_REG 0x154 +#define PCIE_DEV_ID_7_EP4_REG 0x158 +#define PCIE_CC_REV_ID_7_EP4_REG 0x15c +#define PCIE_SUBSYS_VEN_ID_REG 0x160 +#define PCIE_COMMON_CLOCK_CONFIG_0_4_0 0x164 +#define PCIE_MIPHYP_SSC_EN_REG 0x168 +#define PCIE_MIPHYP_ADDR_REG 0x16c +#define PCIE_L1_ASPM_READY_REG 0x170 +#define PCIE_EXT_CFG_RDY_REG 0x174 +#define PCIE_SoC_INT_ROUTER_STATUS0_REG 0x178 +#define PCIE_SoC_INT_ROUTER_STATUS1_REG 0x17c +#define PCIE_SoC_INT_ROUTER_STATUS2_REG 0x180 +#define PCIE_SoC_INT_ROUTER_STATUS3_REG 0x184 +#define DMA_IP_CTRL_REG 0x324 +#define DISP_BRIDGE_PU_PD_CTRL_REG 0x328 +#define VIP_PU_PD_CTRL_REG 0x32c +#define USB_MLB_PU_PD_CTRL_REG 0x330 +#define SDIO_PU_PD_MISCFUNC_CTRL_REG1 0x334 +#define SDIO_PU_PD_MISCFUNC_CTRL_REG2 0x338 +#define UART_PU_PD_CTRL_REG 0x33c +#define ARM_Lock 0x340 +#define SYS_IO_CHAR_REG1 0x344 +#define SYS_IO_CHAR_REG2 0x348 +#define SATA_CORE_ID_REG 0x34c +#define SATA_CTRL_REG 0x350 +#define I2C_HSFIX_MISC_REG 0x354 +#define SPARE2_RESERVED 0x358 +#define SPARE3_RESERVED 0x35c +#define MASTER_LOCK_REG 0x368 +#define SYSTEM_CONFIG_STATUS_REG 0x36c +#define MSP_CLK_CTRL_REG 0x39c +#define COMPENSATION_REG1 0x3c4 +#define COMPENSATION_REG2 0x3c8 +#define COMPENSATION_REG3 0x3cc +#define TEST_CTL_REG 0x3d0 + +/* + * SECR (OTP) registers + */ +#define STA2X11_SECR_CR 0x00 +#define STA2X11_SECR_FVR0 0x10 +#define STA2X11_SECR_FVR1 0x14 + +extern int sta2x11_mfd_get_regs_data(struct platform_device *pdev, + enum sta2x11_mfd_plat_dev index, + void __iomem **regs, + spinlock_t **lock); + #endif /* __STA2X11_MFD_H */ diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h index f8d5b4d5843..383ac1512a3 100644 --- a/include/linux/mfd/stmpe.h +++ b/include/linux/mfd/stmpe.h @@ -62,6 +62,7 @@ struct stmpe_client_info; * @lock: lock protecting I/O operations * @irq_lock: IRQ bus lock * @dev: device, mostly for dev_dbg() + * @irq_domain: IRQ domain * @client: client - i2c or spi * @ci: client specific information * @partnum: part number @@ -79,6 +80,7 @@ struct stmpe { struct mutex lock; struct mutex irq_lock; struct device *dev; + struct irq_domain *domain; void *client; struct stmpe_client_info *ci; enum stmpe_partnum partnum; @@ -188,7 +190,6 @@ struct stmpe_ts_platform_data { * @id: device id to distinguish between multiple STMPEs on the same board * @blocks: bitmask of blocks to enable (use STMPE_BLOCK_*) * @irq_trigger: IRQ trigger to use for the interrupt to the host - * @irq_invert_polarity: IRQ line is connected with reversed polarity * @autosleep: bool to enable/disable stmpe autosleep * @autosleep_timeout: inactivity timeout in milliseconds for autosleep * @irq_base: base IRQ number. %STMPE_NR_IRQS irqs will be used, or @@ -205,7 +206,6 @@ struct stmpe_platform_data { unsigned int blocks; int irq_base; unsigned int irq_trigger; - bool irq_invert_polarity; bool autosleep; bool irq_over_gpio; int irq_gpio; diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h new file mode 100644 index 00000000000..c79ad5d2f27 --- /dev/null +++ b/include/linux/mfd/ti_am335x_tscadc.h @@ -0,0 +1,152 @@ +#ifndef __LINUX_TI_AM335X_TSCADC_MFD_H +#define __LINUX_TI_AM335X_TSCADC_MFD_H + +/* + * TI Touch Screen / ADC MFD driver + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/mfd/core.h> + +#define REG_RAWIRQSTATUS 0x024 +#define REG_IRQSTATUS 0x028 +#define REG_IRQENABLE 0x02C +#define REG_IRQCLR 0x030 +#define REG_IRQWAKEUP 0x034 +#define REG_CTRL 0x040 +#define REG_ADCFSM 0x044 +#define REG_CLKDIV 0x04C +#define REG_SE 0x054 +#define REG_IDLECONFIG 0x058 +#define REG_CHARGECONFIG 0x05C +#define REG_CHARGEDELAY 0x060 +#define REG_STEPCONFIG(n) (0x64 + ((n - 1) * 8)) +#define REG_STEPDELAY(n) (0x68 + ((n - 1) * 8)) +#define REG_FIFO0CNT 0xE4 +#define REG_FIFO0THR 0xE8 +#define REG_FIFO1CNT 0xF0 +#define REG_FIFO1THR 0xF4 +#define REG_FIFO0 0x100 +#define REG_FIFO1 0x200 + +/* Register Bitfields */ +/* IRQ wakeup enable */ +#define IRQWKUP_ENB BIT(0) + +/* Step Enable */ +#define STEPENB_MASK (0x1FFFF << 0) +#define STEPENB(val) ((val) << 0) +#define STPENB_STEPENB STEPENB(0x1FFFF) +#define STPENB_STEPENB_TC STEPENB(0x1FFF) + +/* IRQ enable */ +#define IRQENB_HW_PEN BIT(0) +#define IRQENB_FIFO0THRES BIT(2) +#define IRQENB_FIFO1THRES BIT(5) +#define IRQENB_PENUP BIT(9) + +/* Step Configuration */ +#define STEPCONFIG_MODE_MASK (3 << 0) +#define STEPCONFIG_MODE(val) ((val) << 0) +#define STEPCONFIG_MODE_HWSYNC STEPCONFIG_MODE(2) +#define STEPCONFIG_AVG_MASK (7 << 2) +#define STEPCONFIG_AVG(val) ((val) << 2) +#define STEPCONFIG_AVG_16 STEPCONFIG_AVG(4) +#define STEPCONFIG_XPP BIT(5) +#define STEPCONFIG_XNN BIT(6) +#define STEPCONFIG_YPP BIT(7) +#define STEPCONFIG_YNN BIT(8) +#define STEPCONFIG_XNP BIT(9) +#define STEPCONFIG_YPN BIT(10) +#define STEPCONFIG_INM_MASK (0xF << 15) +#define STEPCONFIG_INM(val) ((val) << 15) +#define STEPCONFIG_INM_ADCREFM STEPCONFIG_INM(8) +#define STEPCONFIG_INP_MASK (0xF << 19) +#define STEPCONFIG_INP(val) ((val) << 19) +#define STEPCONFIG_INP_AN2 STEPCONFIG_INP(2) +#define STEPCONFIG_INP_AN3 STEPCONFIG_INP(3) +#define STEPCONFIG_INP_AN4 STEPCONFIG_INP(4) +#define STEPCONFIG_INP_ADCREFM STEPCONFIG_INP(8) +#define STEPCONFIG_FIFO1 BIT(26) + +/* Delay register */ +#define STEPDELAY_OPEN_MASK (0x3FFFF << 0) +#define STEPDELAY_OPEN(val) ((val) << 0) +#define STEPCONFIG_OPENDLY STEPDELAY_OPEN(0x098) +#define STEPDELAY_SAMPLE_MASK (0xFF << 24) +#define STEPDELAY_SAMPLE(val) ((val) << 24) +#define STEPCONFIG_SAMPLEDLY STEPDELAY_SAMPLE(0) + +/* Charge Config */ +#define STEPCHARGE_RFP_MASK (7 << 12) +#define STEPCHARGE_RFP(val) ((val) << 12) +#define STEPCHARGE_RFP_XPUL STEPCHARGE_RFP(1) +#define STEPCHARGE_INM_MASK (0xF << 15) +#define STEPCHARGE_INM(val) ((val) << 15) +#define STEPCHARGE_INM_AN1 STEPCHARGE_INM(1) +#define STEPCHARGE_INP_MASK (0xF << 19) +#define STEPCHARGE_INP(val) ((val) << 19) +#define STEPCHARGE_INP_AN1 STEPCHARGE_INP(1) +#define STEPCHARGE_RFM_MASK (3 << 23) +#define STEPCHARGE_RFM(val) ((val) << 23) +#define STEPCHARGE_RFM_XNUR STEPCHARGE_RFM(1) + +/* Charge delay */ +#define CHARGEDLY_OPEN_MASK (0x3FFFF << 0) +#define CHARGEDLY_OPEN(val) ((val) << 0) +#define CHARGEDLY_OPENDLY CHARGEDLY_OPEN(1) + +/* Control register */ +#define CNTRLREG_TSCSSENB BIT(0) +#define CNTRLREG_STEPID BIT(1) +#define CNTRLREG_STEPCONFIGWRT BIT(2) +#define CNTRLREG_POWERDOWN BIT(4) +#define CNTRLREG_AFE_CTRL_MASK (3 << 5) +#define CNTRLREG_AFE_CTRL(val) ((val) << 5) +#define CNTRLREG_4WIRE CNTRLREG_AFE_CTRL(1) +#define CNTRLREG_5WIRE CNTRLREG_AFE_CTRL(2) +#define CNTRLREG_8WIRE CNTRLREG_AFE_CTRL(3) +#define CNTRLREG_TSCENB BIT(7) + +#define ADC_CLK 3000000 +#define MAX_CLK_DIV 7 +#define TOTAL_STEPS 16 +#define TOTAL_CHANNELS 8 + +#define TSCADC_CELLS 2 + +enum tscadc_cells { + TSC_CELL, + ADC_CELL, +}; + +struct mfd_tscadc_board { + struct tsc_data *tsc_init; + struct adc_data *adc_init; +}; + +struct ti_tscadc_dev { + struct device *dev; + struct regmap *regmap_tscadc; + void __iomem *tscadc_base; + int irq; + struct mfd_cell cells[TSCADC_CELLS]; + + /* tsc device */ + struct titsc *tsc; + + /* adc device */ + struct adc_device *adc; +}; + +#endif diff --git a/include/linux/mfd/tps65090.h b/include/linux/mfd/tps65090.h index 6bc31d85462..6694cf43e8b 100644 --- a/include/linux/mfd/tps65090.h +++ b/include/linux/mfd/tps65090.h @@ -23,37 +23,109 @@ #define __LINUX_MFD_TPS65090_H #include <linux/irq.h> +#include <linux/regmap.h> + +/* TPS65090 IRQs */ +enum { + TPS65090_IRQ_VAC_STATUS_CHANGE, + TPS65090_IRQ_VSYS_STATUS_CHANGE, + TPS65090_IRQ_BAT_STATUS_CHANGE, + TPS65090_IRQ_CHARGING_STATUS_CHANGE, + TPS65090_IRQ_CHARGING_COMPLETE, + TPS65090_IRQ_OVERLOAD_DCDC1, + TPS65090_IRQ_OVERLOAD_DCDC2, + TPS65090_IRQ_OVERLOAD_DCDC3, + TPS65090_IRQ_OVERLOAD_FET1, + TPS65090_IRQ_OVERLOAD_FET2, + TPS65090_IRQ_OVERLOAD_FET3, + TPS65090_IRQ_OVERLOAD_FET4, + TPS65090_IRQ_OVERLOAD_FET5, + TPS65090_IRQ_OVERLOAD_FET6, + TPS65090_IRQ_OVERLOAD_FET7, +}; + +/* TPS65090 Regulator ID */ +enum { + TPS65090_REGULATOR_DCDC1, + TPS65090_REGULATOR_DCDC2, + TPS65090_REGULATOR_DCDC3, + TPS65090_REGULATOR_FET1, + TPS65090_REGULATOR_FET2, + TPS65090_REGULATOR_FET3, + TPS65090_REGULATOR_FET4, + TPS65090_REGULATOR_FET5, + TPS65090_REGULATOR_FET6, + TPS65090_REGULATOR_FET7, + TPS65090_REGULATOR_LDO1, + TPS65090_REGULATOR_LDO2, + + /* Last entry for maximum ID */ + TPS65090_REGULATOR_MAX, +}; struct tps65090 { - struct mutex lock; struct device *dev; - struct i2c_client *client; struct regmap *rmap; - struct irq_chip irq_chip; - struct mutex irq_lock; - int irq_base; - unsigned int id; + struct regmap_irq_chip_data *irq_data; }; -struct tps65090_subdev_info { - int id; - const char *name; - void *platform_data; +/* + * struct tps65090_regulator_plat_data + * + * @reg_init_data: The regulator init data. + * @enable_ext_control: Enable extrenal control or not. Only available for + * DCDC1, DCDC2 and DCDC3. + * @gpio: Gpio number if external control is enabled and controlled through + * gpio. + */ +struct tps65090_regulator_plat_data { + struct regulator_init_data *reg_init_data; + bool enable_ext_control; + int gpio; }; struct tps65090_platform_data { int irq_base; - int num_subdevs; - struct tps65090_subdev_info *subdevs; + struct tps65090_regulator_plat_data *reg_pdata[TPS65090_REGULATOR_MAX]; }; /* * NOTE: the functions below are not intended for use outside * of the TPS65090 sub-device drivers */ -extern int tps65090_write(struct device *dev, int reg, uint8_t val); -extern int tps65090_read(struct device *dev, int reg, uint8_t *val); -extern int tps65090_set_bits(struct device *dev, int reg, uint8_t bit_num); -extern int tps65090_clr_bits(struct device *dev, int reg, uint8_t bit_num); +static inline int tps65090_write(struct device *dev, int reg, uint8_t val) +{ + struct tps65090 *tps = dev_get_drvdata(dev); + + return regmap_write(tps->rmap, reg, val); +} + +static inline int tps65090_read(struct device *dev, int reg, uint8_t *val) +{ + struct tps65090 *tps = dev_get_drvdata(dev); + unsigned int temp_val; + int ret; + + ret = regmap_read(tps->rmap, reg, &temp_val); + if (!ret) + *val = temp_val; + return ret; +} + +static inline int tps65090_set_bits(struct device *dev, int reg, + uint8_t bit_num) +{ + struct tps65090 *tps = dev_get_drvdata(dev); + + return regmap_update_bits(tps->rmap, reg, BIT(bit_num), ~0u); +} + +static inline int tps65090_clr_bits(struct device *dev, int reg, + uint8_t bit_num) +{ + struct tps65090 *tps = dev_get_drvdata(dev); + + return regmap_update_bits(tps->rmap, reg, BIT(bit_num), 0u); +} #endif /*__LINUX_MFD_TPS65090_H */ diff --git a/include/linux/mfd/tps6586x.h b/include/linux/mfd/tps6586x.h index 2dd12319495..87994542573 100644 --- a/include/linux/mfd/tps6586x.h +++ b/include/linux/mfd/tps6586x.h @@ -29,6 +29,7 @@ enum { TPS6586X_ID_LDO_8, TPS6586X_ID_LDO_9, TPS6586X_ID_LDO_RTC, + TPS6586X_ID_MAX_REGULATOR, }; enum { @@ -79,6 +80,8 @@ struct tps6586x_platform_data { int gpio_base; int irq_base; bool pm_off; + + struct regulator_init_data *reg_init_data[TPS6586X_ID_MAX_REGULATOR]; }; /* @@ -93,5 +96,6 @@ extern int tps6586x_set_bits(struct device *dev, int reg, uint8_t bit_mask); extern int tps6586x_clr_bits(struct device *dev, int reg, uint8_t bit_mask); extern int tps6586x_update(struct device *dev, int reg, uint8_t val, uint8_t mask); +extern int tps6586x_irq_get_virq(struct device *dev, int irq); #endif /*__LINUX_MFD_TPS6586X_H */ diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h index 02e894f3ff4..20e433e551e 100644 --- a/include/linux/mfd/tps65910.h +++ b/include/linux/mfd/tps65910.h @@ -572,6 +572,49 @@ #define SPARE_SPARE_MASK 0xFF #define SPARE_SPARE_SHIFT 0 +#define TPS65910_INT_STS_RTC_PERIOD_IT_MASK 0x80 +#define TPS65910_INT_STS_RTC_PERIOD_IT_SHIFT 7 +#define TPS65910_INT_STS_RTC_ALARM_IT_MASK 0x40 +#define TPS65910_INT_STS_RTC_ALARM_IT_SHIFT 6 +#define TPS65910_INT_STS_HOTDIE_IT_MASK 0x20 +#define TPS65910_INT_STS_HOTDIE_IT_SHIFT 5 +#define TPS65910_INT_STS_PWRHOLD_F_IT_MASK 0x10 +#define TPS65910_INT_STS_PWRHOLD_F_IT_SHIFT 4 +#define TPS65910_INT_STS_PWRON_LP_IT_MASK 0x08 +#define TPS65910_INT_STS_PWRON_LP_IT_SHIFT 3 +#define TPS65910_INT_STS_PWRON_IT_MASK 0x04 +#define TPS65910_INT_STS_PWRON_IT_SHIFT 2 +#define TPS65910_INT_STS_VMBHI_IT_MASK 0x02 +#define TPS65910_INT_STS_VMBHI_IT_SHIFT 1 +#define TPS65910_INT_STS_VMBDCH_IT_MASK 0x01 +#define TPS65910_INT_STS_VMBDCH_IT_SHIFT 0 + +#define TPS65910_INT_MSK_RTC_PERIOD_IT_MSK_MASK 0x80 +#define TPS65910_INT_MSK_RTC_PERIOD_IT_MSK_SHIFT 7 +#define TPS65910_INT_MSK_RTC_ALARM_IT_MSK_MASK 0x40 +#define TPS65910_INT_MSK_RTC_ALARM_IT_MSK_SHIFT 6 +#define TPS65910_INT_MSK_HOTDIE_IT_MSK_MASK 0x20 +#define TPS65910_INT_MSK_HOTDIE_IT_MSK_SHIFT 5 +#define TPS65910_INT_MSK_PWRHOLD_IT_MSK_MASK 0x10 +#define TPS65910_INT_MSK_PWRHOLD_IT_MSK_SHIFT 4 +#define TPS65910_INT_MSK_PWRON_LP_IT_MSK_MASK 0x08 +#define TPS65910_INT_MSK_PWRON_LP_IT_MSK_SHIFT 3 +#define TPS65910_INT_MSK_PWRON_IT_MSK_MASK 0x04 +#define TPS65910_INT_MSK_PWRON_IT_MSK_SHIFT 2 +#define TPS65910_INT_MSK_VMBHI_IT_MSK_MASK 0x02 +#define TPS65910_INT_MSK_VMBHI_IT_MSK_SHIFT 1 +#define TPS65910_INT_MSK_VMBDCH_IT_MSK_MASK 0x01 +#define TPS65910_INT_MSK_VMBDCH_IT_MSK_SHIFT 0 + +#define TPS65910_INT_STS2_GPIO0_F_IT_SHIFT 2 +#define TPS65910_INT_STS2_GPIO0_F_IT_MASK 0x02 +#define TPS65910_INT_STS2_GPIO0_R_IT_SHIFT 1 +#define TPS65910_INT_STS2_GPIO0_R_IT_MASK 0x01 + +#define TPS65910_INT_MSK2_GPIO0_F_IT_MSK_SHIFT 2 +#define TPS65910_INT_MSK2_GPIO0_F_IT_MSK_MASK 0x02 +#define TPS65910_INT_MSK2_GPIO0_R_IT_MSK_SHIFT 1 +#define TPS65910_INT_MSK2_GPIO0_R_IT_MSK_MASK 0x01 /*Register INT_STS (0x80) register.RegisterDescription */ #define INT_STS_RTC_PERIOD_IT_MASK 0x80 @@ -580,16 +623,16 @@ #define INT_STS_RTC_ALARM_IT_SHIFT 6 #define INT_STS_HOTDIE_IT_MASK 0x20 #define INT_STS_HOTDIE_IT_SHIFT 5 -#define INT_STS_PWRHOLD_IT_MASK 0x10 -#define INT_STS_PWRHOLD_IT_SHIFT 4 +#define INT_STS_PWRHOLD_R_IT_MASK 0x10 +#define INT_STS_PWRHOLD_R_IT_SHIFT 4 #define INT_STS_PWRON_LP_IT_MASK 0x08 #define INT_STS_PWRON_LP_IT_SHIFT 3 #define INT_STS_PWRON_IT_MASK 0x04 #define INT_STS_PWRON_IT_SHIFT 2 #define INT_STS_VMBHI_IT_MASK 0x02 #define INT_STS_VMBHI_IT_SHIFT 1 -#define INT_STS_VMBDCH_IT_MASK 0x01 -#define INT_STS_VMBDCH_IT_SHIFT 0 +#define INT_STS_PWRHOLD_F_IT_MASK 0x01 +#define INT_STS_PWRHOLD_F_IT_SHIFT 0 /*Register INT_MSK (0x80) register.RegisterDescription */ @@ -599,16 +642,16 @@ #define INT_MSK_RTC_ALARM_IT_MSK_SHIFT 6 #define INT_MSK_HOTDIE_IT_MSK_MASK 0x20 #define INT_MSK_HOTDIE_IT_MSK_SHIFT 5 -#define INT_MSK_PWRHOLD_IT_MSK_MASK 0x10 -#define INT_MSK_PWRHOLD_IT_MSK_SHIFT 4 +#define INT_MSK_PWRHOLD_R_IT_MSK_MASK 0x10 +#define INT_MSK_PWRHOLD_R_IT_MSK_SHIFT 4 #define INT_MSK_PWRON_LP_IT_MSK_MASK 0x08 #define INT_MSK_PWRON_LP_IT_MSK_SHIFT 3 #define INT_MSK_PWRON_IT_MSK_MASK 0x04 #define INT_MSK_PWRON_IT_MSK_SHIFT 2 #define INT_MSK_VMBHI_IT_MSK_MASK 0x02 #define INT_MSK_VMBHI_IT_MSK_SHIFT 1 -#define INT_MSK_VMBDCH_IT_MSK_MASK 0x01 -#define INT_MSK_VMBDCH_IT_MSK_SHIFT 0 +#define INT_MSK_PWRHOLD_F_IT_MSK_MASK 0x01 +#define INT_MSK_PWRHOLD_F_IT_MSK_SHIFT 0 /*Register INT_STS2 (0x80) register.RegisterDescription */ @@ -650,6 +693,14 @@ /*Register INT_STS3 (0x80) register.RegisterDescription */ +#define INT_STS3_PWRDN_IT_MASK 0x80 +#define INT_STS3_PWRDN_IT_SHIFT 7 +#define INT_STS3_VMBCH2_L_IT_MASK 0x40 +#define INT_STS3_VMBCH2_L_IT_SHIFT 6 +#define INT_STS3_VMBCH2_H_IT_MASK 0x20 +#define INT_STS3_VMBCH2_H_IT_SHIFT 5 +#define INT_STS3_WTCHDG_IT_MASK 0x10 +#define INT_STS3_WTCHDG_IT_SHIFT 4 #define INT_STS3_GPIO5_F_IT_MASK 0x08 #define INT_STS3_GPIO5_F_IT_SHIFT 3 #define INT_STS3_GPIO5_R_IT_MASK 0x04 @@ -661,6 +712,14 @@ /*Register INT_MSK3 (0x80) register.RegisterDescription */ +#define INT_MSK3_PWRDN_IT_MSK_MASK 0x80 +#define INT_MSK3_PWRDN_IT_MSK_SHIFT 7 +#define INT_MSK3_VMBCH2_L_IT_MSK_MASK 0x40 +#define INT_MSK3_VMBCH2_L_IT_MSK_SHIFT 6 +#define INT_MSK3_VMBCH2_H_IT_MSK_MASK 0x20 +#define INT_MSK3_VMBCH2_H_IT_MSK_SHIFT 5 +#define INT_MSK3_WTCHDG_IT_MSK_MASK 0x10 +#define INT_MSK3_WTCHDG_IT_MSK_SHIFT 4 #define INT_MSK3_GPIO5_F_IT_MSK_MASK 0x08 #define INT_MSK3_GPIO5_F_IT_MSK_SHIFT 3 #define INT_MSK3_GPIO5_R_IT_MSK_MASK 0x04 @@ -721,34 +780,32 @@ #define TPS65910_IRQ_GPIO_F 9 #define TPS65910_NUM_IRQ 10 -#define TPS65911_IRQ_VBAT_VMBDCH 0 -#define TPS65911_IRQ_VBAT_VMBDCH2L 1 -#define TPS65911_IRQ_VBAT_VMBDCH2H 2 -#define TPS65911_IRQ_VBAT_VMHI 3 -#define TPS65911_IRQ_PWRON 4 -#define TPS65911_IRQ_PWRON_LP 5 -#define TPS65911_IRQ_PWRHOLD_F 6 -#define TPS65911_IRQ_PWRHOLD_R 7 -#define TPS65911_IRQ_HOTDIE 8 -#define TPS65911_IRQ_RTC_ALARM 9 -#define TPS65911_IRQ_RTC_PERIOD 10 -#define TPS65911_IRQ_GPIO0_R 11 -#define TPS65911_IRQ_GPIO0_F 12 -#define TPS65911_IRQ_GPIO1_R 13 -#define TPS65911_IRQ_GPIO1_F 14 -#define TPS65911_IRQ_GPIO2_R 15 -#define TPS65911_IRQ_GPIO2_F 16 -#define TPS65911_IRQ_GPIO3_R 17 -#define TPS65911_IRQ_GPIO3_F 18 -#define TPS65911_IRQ_GPIO4_R 19 -#define TPS65911_IRQ_GPIO4_F 20 -#define TPS65911_IRQ_GPIO5_R 21 -#define TPS65911_IRQ_GPIO5_F 22 -#define TPS65911_IRQ_WTCHDG 23 -#define TPS65911_IRQ_PWRDN 24 - -#define TPS65911_NUM_IRQ 25 - +#define TPS65911_IRQ_PWRHOLD_F 0 +#define TPS65911_IRQ_VBAT_VMHI 1 +#define TPS65911_IRQ_PWRON 2 +#define TPS65911_IRQ_PWRON_LP 3 +#define TPS65911_IRQ_PWRHOLD_R 4 +#define TPS65911_IRQ_HOTDIE 5 +#define TPS65911_IRQ_RTC_ALARM 6 +#define TPS65911_IRQ_RTC_PERIOD 7 +#define TPS65911_IRQ_GPIO0_R 8 +#define TPS65911_IRQ_GPIO0_F 9 +#define TPS65911_IRQ_GPIO1_R 10 +#define TPS65911_IRQ_GPIO1_F 11 +#define TPS65911_IRQ_GPIO2_R 12 +#define TPS65911_IRQ_GPIO2_F 13 +#define TPS65911_IRQ_GPIO3_R 14 +#define TPS65911_IRQ_GPIO3_F 15 +#define TPS65911_IRQ_GPIO4_R 16 +#define TPS65911_IRQ_GPIO4_F 17 +#define TPS65911_IRQ_GPIO5_R 18 +#define TPS65911_IRQ_GPIO5_F 19 +#define TPS65911_IRQ_WTCHDG 20 +#define TPS65911_IRQ_VMBCH2_H 21 +#define TPS65911_IRQ_VMBCH2_L 22 +#define TPS65911_IRQ_PWRDN 23 + +#define TPS65911_NUM_IRQ 24 /* GPIO Register Definitions */ #define TPS65910_GPIO_DEB BIT(2) @@ -836,7 +893,6 @@ struct tps65910 { struct device *dev; struct i2c_client *i2c_client; struct regmap *regmap; - struct mutex io_mutex; unsigned int id; /* Client devices */ @@ -848,12 +904,8 @@ struct tps65910 { struct tps65910_board *of_plat_data; /* IRQ Handling */ - struct mutex irq_lock; int chip_irq; - int irq_base; - int irq_num; - u32 irq_mask; - struct irq_domain *domain; + struct regmap_irq_chip_data *irq_data; }; struct tps65910_platform_data { @@ -861,10 +913,6 @@ struct tps65910_platform_data { int irq_base; }; -int tps65910_irq_init(struct tps65910 *tps65910, int irq, - struct tps65910_platform_data *pdata); -int tps65910_irq_exit(struct tps65910 *tps65910); - static inline int tps65910_chip_id(struct tps65910 *tps65910) { return tps65910->id; @@ -900,4 +948,9 @@ static inline int tps65910_reg_update_bits(struct tps65910 *tps65910, u8 reg, return regmap_update_bits(tps65910->regmap, reg, mask, val); } +static inline int tps65910_irq_get_virq(struct tps65910 *tps65910, int irq) +{ + return regmap_irq_get_virq(tps65910->irq_data, irq); +} + #endif /* __LINUX_MFD_TPS65910_H */ diff --git a/include/linux/mfd/tps80031.h b/include/linux/mfd/tps80031.h new file mode 100644 index 00000000000..2c75c9c9318 --- /dev/null +++ b/include/linux/mfd/tps80031.h @@ -0,0 +1,637 @@ +/* + * tps80031.h -- TI TPS80031 and TI TPS80032 PMIC driver. + * + * Copyright (c) 2012, NVIDIA Corporation. + * + * Author: Laxman Dewangan <ldewangan@nvidia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, + * whether express or implied; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307, USA + */ + +#ifndef __LINUX_MFD_TPS80031_H +#define __LINUX_MFD_TPS80031_H + +#include <linux/device.h> +#include <linux/regmap.h> + +/* Pull-ups/Pull-downs */ +#define TPS80031_CFG_INPUT_PUPD1 0xF0 +#define TPS80031_CFG_INPUT_PUPD2 0xF1 +#define TPS80031_CFG_INPUT_PUPD3 0xF2 +#define TPS80031_CFG_INPUT_PUPD4 0xF3 +#define TPS80031_CFG_LDO_PD1 0xF4 +#define TPS80031_CFG_LDO_PD2 0xF5 +#define TPS80031_CFG_SMPS_PD 0xF6 + +/* Real Time Clock */ +#define TPS80031_SECONDS_REG 0x00 +#define TPS80031_MINUTES_REG 0x01 +#define TPS80031_HOURS_REG 0x02 +#define TPS80031_DAYS_REG 0x03 +#define TPS80031_MONTHS_REG 0x04 +#define TPS80031_YEARS_REG 0x05 +#define TPS80031_WEEKS_REG 0x06 +#define TPS80031_ALARM_SECONDS_REG 0x08 +#define TPS80031_ALARM_MINUTES_REG 0x09 +#define TPS80031_ALARM_HOURS_REG 0x0A +#define TPS80031_ALARM_DAYS_REG 0x0B +#define TPS80031_ALARM_MONTHS_REG 0x0C +#define TPS80031_ALARM_YEARS_REG 0x0D +#define TPS80031_RTC_CTRL_REG 0x10 +#define TPS80031_RTC_STATUS_REG 0x11 +#define TPS80031_RTC_INTERRUPTS_REG 0x12 +#define TPS80031_RTC_COMP_LSB_REG 0x13 +#define TPS80031_RTC_COMP_MSB_REG 0x14 +#define TPS80031_RTC_RESET_STATUS_REG 0x16 + +/*PMC Master Module */ +#define TPS80031_PHOENIX_START_CONDITION 0x1F +#define TPS80031_PHOENIX_MSK_TRANSITION 0x20 +#define TPS80031_STS_HW_CONDITIONS 0x21 +#define TPS80031_PHOENIX_LAST_TURNOFF_STS 0x22 +#define TPS80031_VSYSMIN_LO_THRESHOLD 0x23 +#define TPS80031_VSYSMIN_HI_THRESHOLD 0x24 +#define TPS80031_PHOENIX_DEV_ON 0x25 +#define TPS80031_STS_PWR_GRP_STATE 0x27 +#define TPS80031_PH_CFG_VSYSLOW 0x28 +#define TPS80031_PH_STS_BOOT 0x29 +#define TPS80031_PHOENIX_SENS_TRANSITION 0x2A +#define TPS80031_PHOENIX_SEQ_CFG 0x2B +#define TPS80031_PRIMARY_WATCHDOG_CFG 0X2C +#define TPS80031_KEY_PRESS_DUR_CFG 0X2D +#define TPS80031_SMPS_LDO_SHORT_STS 0x2E + +/* PMC Slave Module - Broadcast */ +#define TPS80031_BROADCAST_ADDR_ALL 0x31 +#define TPS80031_BROADCAST_ADDR_REF 0x32 +#define TPS80031_BROADCAST_ADDR_PROV 0x33 +#define TPS80031_BROADCAST_ADDR_CLK_RST 0x34 + +/* PMC Slave Module SMPS Regulators */ +#define TPS80031_SMPS4_CFG_TRANS 0x41 +#define TPS80031_SMPS4_CFG_STATE 0x42 +#define TPS80031_SMPS4_CFG_VOLTAGE 0x44 +#define TPS80031_VIO_CFG_TRANS 0x47 +#define TPS80031_VIO_CFG_STATE 0x48 +#define TPS80031_VIO_CFG_FORCE 0x49 +#define TPS80031_VIO_CFG_VOLTAGE 0x4A +#define TPS80031_VIO_CFG_STEP 0x48 +#define TPS80031_SMPS1_CFG_TRANS 0x53 +#define TPS80031_SMPS1_CFG_STATE 0x54 +#define TPS80031_SMPS1_CFG_FORCE 0x55 +#define TPS80031_SMPS1_CFG_VOLTAGE 0x56 +#define TPS80031_SMPS1_CFG_STEP 0x57 +#define TPS80031_SMPS2_CFG_TRANS 0x59 +#define TPS80031_SMPS2_CFG_STATE 0x5A +#define TPS80031_SMPS2_CFG_FORCE 0x5B +#define TPS80031_SMPS2_CFG_VOLTAGE 0x5C +#define TPS80031_SMPS2_CFG_STEP 0x5D +#define TPS80031_SMPS3_CFG_TRANS 0x65 +#define TPS80031_SMPS3_CFG_STATE 0x66 +#define TPS80031_SMPS3_CFG_VOLTAGE 0x68 + +/* PMC Slave Module LDO Regulators */ +#define TPS80031_VANA_CFG_TRANS 0x81 +#define TPS80031_VANA_CFG_STATE 0x82 +#define TPS80031_VANA_CFG_VOLTAGE 0x83 +#define TPS80031_LDO2_CFG_TRANS 0x85 +#define TPS80031_LDO2_CFG_STATE 0x86 +#define TPS80031_LDO2_CFG_VOLTAGE 0x87 +#define TPS80031_LDO4_CFG_TRANS 0x89 +#define TPS80031_LDO4_CFG_STATE 0x8A +#define TPS80031_LDO4_CFG_VOLTAGE 0x8B +#define TPS80031_LDO3_CFG_TRANS 0x8D +#define TPS80031_LDO3_CFG_STATE 0x8E +#define TPS80031_LDO3_CFG_VOLTAGE 0x8F +#define TPS80031_LDO6_CFG_TRANS 0x91 +#define TPS80031_LDO6_CFG_STATE 0x92 +#define TPS80031_LDO6_CFG_VOLTAGE 0x93 +#define TPS80031_LDOLN_CFG_TRANS 0x95 +#define TPS80031_LDOLN_CFG_STATE 0x96 +#define TPS80031_LDOLN_CFG_VOLTAGE 0x97 +#define TPS80031_LDO5_CFG_TRANS 0x99 +#define TPS80031_LDO5_CFG_STATE 0x9A +#define TPS80031_LDO5_CFG_VOLTAGE 0x9B +#define TPS80031_LDO1_CFG_TRANS 0x9D +#define TPS80031_LDO1_CFG_STATE 0x9E +#define TPS80031_LDO1_CFG_VOLTAGE 0x9F +#define TPS80031_LDOUSB_CFG_TRANS 0xA1 +#define TPS80031_LDOUSB_CFG_STATE 0xA2 +#define TPS80031_LDOUSB_CFG_VOLTAGE 0xA3 +#define TPS80031_LDO7_CFG_TRANS 0xA5 +#define TPS80031_LDO7_CFG_STATE 0xA6 +#define TPS80031_LDO7_CFG_VOLTAGE 0xA7 + +/* PMC Slave Module External Control */ +#define TPS80031_REGEN1_CFG_TRANS 0xAE +#define TPS80031_REGEN1_CFG_STATE 0xAF +#define TPS80031_REGEN2_CFG_TRANS 0xB1 +#define TPS80031_REGEN2_CFG_STATE 0xB2 +#define TPS80031_SYSEN_CFG_TRANS 0xB4 +#define TPS80031_SYSEN_CFG_STATE 0xB5 + +/* PMC Slave Module Internal Control */ +#define TPS80031_NRESPWRON_CFG_TRANS 0xB7 +#define TPS80031_NRESPWRON_CFG_STATE 0xB8 +#define TPS80031_CLK32KAO_CFG_TRANS 0xBA +#define TPS80031_CLK32KAO_CFG_STATE 0xBB +#define TPS80031_CLK32KG_CFG_TRANS 0xBD +#define TPS80031_CLK32KG_CFG_STATE 0xBE +#define TPS80031_CLK32KAUDIO_CFG_TRANS 0xC0 +#define TPS80031_CLK32KAUDIO_CFG_STATE 0xC1 +#define TPS80031_VRTC_CFG_TRANS 0xC3 +#define TPS80031_VRTC_CFG_STATE 0xC4 +#define TPS80031_BIAS_CFG_TRANS 0xC6 +#define TPS80031_BIAS_CFG_STATE 0xC7 +#define TPS80031_VSYSMIN_HI_CFG_TRANS 0xC9 +#define TPS80031_VSYSMIN_HI_CFG_STATE 0xCA +#define TPS80031_RC6MHZ_CFG_TRANS 0xCC +#define TPS80031_RC6MHZ_CFG_STATE 0xCD +#define TPS80031_TMP_CFG_TRANS 0xCF +#define TPS80031_TMP_CFG_STATE 0xD0 + +/* PMC Slave Module resources assignment */ +#define TPS80031_PREQ1_RES_ASS_A 0xD7 +#define TPS80031_PREQ1_RES_ASS_B 0xD8 +#define TPS80031_PREQ1_RES_ASS_C 0xD9 +#define TPS80031_PREQ2_RES_ASS_A 0xDA +#define TPS80031_PREQ2_RES_ASS_B 0xDB +#define TPS80031_PREQ2_RES_ASS_C 0xDC +#define TPS80031_PREQ3_RES_ASS_A 0xDD +#define TPS80031_PREQ3_RES_ASS_B 0xDE +#define TPS80031_PREQ3_RES_ASS_C 0xDF + +/* PMC Slave Module Miscellaneous */ +#define TPS80031_SMPS_OFFSET 0xE0 +#define TPS80031_SMPS_MULT 0xE3 +#define TPS80031_MISC1 0xE4 +#define TPS80031_MISC2 0xE5 +#define TPS80031_BBSPOR_CFG 0xE6 +#define TPS80031_TMP_CFG 0xE7 + +/* Battery Charging Controller and Indicator LED */ +#define TPS80031_CONTROLLER_CTRL2 0xDA +#define TPS80031_CONTROLLER_VSEL_COMP 0xDB +#define TPS80031_CHARGERUSB_VSYSREG 0xDC +#define TPS80031_CHARGERUSB_VICHRG_PC 0xDD +#define TPS80031_LINEAR_CHRG_STS 0xDE +#define TPS80031_CONTROLLER_INT_MASK 0xE0 +#define TPS80031_CONTROLLER_CTRL1 0xE1 +#define TPS80031_CONTROLLER_WDG 0xE2 +#define TPS80031_CONTROLLER_STAT1 0xE3 +#define TPS80031_CHARGERUSB_INT_STATUS 0xE4 +#define TPS80031_CHARGERUSB_INT_MASK 0xE5 +#define TPS80031_CHARGERUSB_STATUS_INT1 0xE6 +#define TPS80031_CHARGERUSB_STATUS_INT2 0xE7 +#define TPS80031_CHARGERUSB_CTRL1 0xE8 +#define TPS80031_CHARGERUSB_CTRL2 0xE9 +#define TPS80031_CHARGERUSB_CTRL3 0xEA +#define TPS80031_CHARGERUSB_STAT1 0xEB +#define TPS80031_CHARGERUSB_VOREG 0xEC +#define TPS80031_CHARGERUSB_VICHRG 0xED +#define TPS80031_CHARGERUSB_CINLIMIT 0xEE +#define TPS80031_CHARGERUSB_CTRLLIMIT1 0xEF +#define TPS80031_CHARGERUSB_CTRLLIMIT2 0xF0 +#define TPS80031_LED_PWM_CTRL1 0xF4 +#define TPS80031_LED_PWM_CTRL2 0xF5 + +/* USB On-The-Go */ +#define TPS80031_BACKUP_REG 0xFA +#define TPS80031_USB_VENDOR_ID_LSB 0x00 +#define TPS80031_USB_VENDOR_ID_MSB 0x01 +#define TPS80031_USB_PRODUCT_ID_LSB 0x02 +#define TPS80031_USB_PRODUCT_ID_MSB 0x03 +#define TPS80031_USB_VBUS_CTRL_SET 0x04 +#define TPS80031_USB_VBUS_CTRL_CLR 0x05 +#define TPS80031_USB_ID_CTRL_SET 0x06 +#define TPS80031_USB_ID_CTRL_CLR 0x07 +#define TPS80031_USB_VBUS_INT_SRC 0x08 +#define TPS80031_USB_VBUS_INT_LATCH_SET 0x09 +#define TPS80031_USB_VBUS_INT_LATCH_CLR 0x0A +#define TPS80031_USB_VBUS_INT_EN_LO_SET 0x0B +#define TPS80031_USB_VBUS_INT_EN_LO_CLR 0x0C +#define TPS80031_USB_VBUS_INT_EN_HI_SET 0x0D +#define TPS80031_USB_VBUS_INT_EN_HI_CLR 0x0E +#define TPS80031_USB_ID_INT_SRC 0x0F +#define TPS80031_USB_ID_INT_LATCH_SET 0x10 +#define TPS80031_USB_ID_INT_LATCH_CLR 0x11 +#define TPS80031_USB_ID_INT_EN_LO_SET 0x12 +#define TPS80031_USB_ID_INT_EN_LO_CLR 0x13 +#define TPS80031_USB_ID_INT_EN_HI_SET 0x14 +#define TPS80031_USB_ID_INT_EN_HI_CLR 0x15 +#define TPS80031_USB_OTG_ADP_CTRL 0x16 +#define TPS80031_USB_OTG_ADP_HIGH 0x17 +#define TPS80031_USB_OTG_ADP_LOW 0x18 +#define TPS80031_USB_OTG_ADP_RISE 0x19 +#define TPS80031_USB_OTG_REVISION 0x1A + +/* Gas Gauge */ +#define TPS80031_FG_REG_00 0xC0 +#define TPS80031_FG_REG_01 0xC1 +#define TPS80031_FG_REG_02 0xC2 +#define TPS80031_FG_REG_03 0xC3 +#define TPS80031_FG_REG_04 0xC4 +#define TPS80031_FG_REG_05 0xC5 +#define TPS80031_FG_REG_06 0xC6 +#define TPS80031_FG_REG_07 0xC7 +#define TPS80031_FG_REG_08 0xC8 +#define TPS80031_FG_REG_09 0xC9 +#define TPS80031_FG_REG_10 0xCA +#define TPS80031_FG_REG_11 0xCB + +/* General Purpose ADC */ +#define TPS80031_GPADC_CTRL 0x2E +#define TPS80031_GPADC_CTRL2 0x2F +#define TPS80031_RTSELECT_LSB 0x32 +#define TPS80031_RTSELECT_ISB 0x33 +#define TPS80031_RTSELECT_MSB 0x34 +#define TPS80031_GPSELECT_ISB 0x35 +#define TPS80031_CTRL_P1 0x36 +#define TPS80031_RTCH0_LSB 0x37 +#define TPS80031_RTCH0_MSB 0x38 +#define TPS80031_RTCH1_LSB 0x39 +#define TPS80031_RTCH1_MSB 0x3A +#define TPS80031_GPCH0_LSB 0x3B +#define TPS80031_GPCH0_MSB 0x3C + +/* SIM, MMC and Battery Detection */ +#define TPS80031_SIMDEBOUNCING 0xEB +#define TPS80031_SIMCTRL 0xEC +#define TPS80031_MMCDEBOUNCING 0xED +#define TPS80031_MMCCTRL 0xEE +#define TPS80031_BATDEBOUNCING 0xEF + +/* Vibrator Driver and PWMs */ +#define TPS80031_VIBCTRL 0x9B +#define TPS80031_VIBMODE 0x9C +#define TPS80031_PWM1ON 0xBA +#define TPS80031_PWM1OFF 0xBB +#define TPS80031_PWM2ON 0xBD +#define TPS80031_PWM2OFF 0xBE + +/* Control Interface */ +#define TPS80031_INT_STS_A 0xD0 +#define TPS80031_INT_STS_B 0xD1 +#define TPS80031_INT_STS_C 0xD2 +#define TPS80031_INT_MSK_LINE_A 0xD3 +#define TPS80031_INT_MSK_LINE_B 0xD4 +#define TPS80031_INT_MSK_LINE_C 0xD5 +#define TPS80031_INT_MSK_STS_A 0xD6 +#define TPS80031_INT_MSK_STS_B 0xD7 +#define TPS80031_INT_MSK_STS_C 0xD8 +#define TPS80031_TOGGLE1 0x90 +#define TPS80031_TOGGLE2 0x91 +#define TPS80031_TOGGLE3 0x92 +#define TPS80031_PWDNSTATUS1 0x93 +#define TPS80031_PWDNSTATUS2 0x94 +#define TPS80031_VALIDITY0 0x17 +#define TPS80031_VALIDITY1 0x18 +#define TPS80031_VALIDITY2 0x19 +#define TPS80031_VALIDITY3 0x1A +#define TPS80031_VALIDITY4 0x1B +#define TPS80031_VALIDITY5 0x1C +#define TPS80031_VALIDITY6 0x1D +#define TPS80031_VALIDITY7 0x1E + +/* Version number related register */ +#define TPS80031_JTAGVERNUM 0x87 +#define TPS80031_EPROM_REV 0xDF + +/* GPADC Trimming Bits. */ +#define TPS80031_GPADC_TRIM0 0xCC +#define TPS80031_GPADC_TRIM1 0xCD +#define TPS80031_GPADC_TRIM2 0xCE +#define TPS80031_GPADC_TRIM3 0xCF +#define TPS80031_GPADC_TRIM4 0xD0 +#define TPS80031_GPADC_TRIM5 0xD1 +#define TPS80031_GPADC_TRIM6 0xD2 +#define TPS80031_GPADC_TRIM7 0xD3 +#define TPS80031_GPADC_TRIM8 0xD4 +#define TPS80031_GPADC_TRIM9 0xD5 +#define TPS80031_GPADC_TRIM10 0xD6 +#define TPS80031_GPADC_TRIM11 0xD7 +#define TPS80031_GPADC_TRIM12 0xD8 +#define TPS80031_GPADC_TRIM13 0xD9 +#define TPS80031_GPADC_TRIM14 0xDA +#define TPS80031_GPADC_TRIM15 0xDB +#define TPS80031_GPADC_TRIM16 0xDC +#define TPS80031_GPADC_TRIM17 0xDD +#define TPS80031_GPADC_TRIM18 0xDE + +/* TPS80031_CONTROLLER_STAT1 bit fields */ +#define TPS80031_CONTROLLER_STAT1_BAT_TEMP 0 +#define TPS80031_CONTROLLER_STAT1_BAT_REMOVED 1 +#define TPS80031_CONTROLLER_STAT1_VBUS_DET 2 +#define TPS80031_CONTROLLER_STAT1_VAC_DET 3 +#define TPS80031_CONTROLLER_STAT1_FAULT_WDG 4 +#define TPS80031_CONTROLLER_STAT1_LINCH_GATED 6 +/* TPS80031_CONTROLLER_INT_MASK bit filed */ +#define TPS80031_CONTROLLER_INT_MASK_MVAC_DET 0 +#define TPS80031_CONTROLLER_INT_MASK_MVBUS_DET 1 +#define TPS80031_CONTROLLER_INT_MASK_MBAT_TEMP 2 +#define TPS80031_CONTROLLER_INT_MASK_MFAULT_WDG 3 +#define TPS80031_CONTROLLER_INT_MASK_MBAT_REMOVED 4 +#define TPS80031_CONTROLLER_INT_MASK_MLINCH_GATED 5 + +#define TPS80031_CHARGE_CONTROL_SUB_INT_MASK 0x3F + +/* TPS80031_PHOENIX_DEV_ON bit field */ +#define TPS80031_DEVOFF 0x1 + +#define TPS80031_EXT_CONTROL_CFG_TRANS 0 +#define TPS80031_EXT_CONTROL_CFG_STATE 1 + +/* State register field */ +#define TPS80031_STATE_OFF 0x00 +#define TPS80031_STATE_ON 0x01 +#define TPS80031_STATE_MASK 0x03 + +/* Trans register field */ +#define TPS80031_TRANS_ACTIVE_OFF 0x00 +#define TPS80031_TRANS_ACTIVE_ON 0x01 +#define TPS80031_TRANS_ACTIVE_MASK 0x03 +#define TPS80031_TRANS_SLEEP_OFF 0x00 +#define TPS80031_TRANS_SLEEP_ON 0x04 +#define TPS80031_TRANS_SLEEP_MASK 0x0C +#define TPS80031_TRANS_OFF_OFF 0x00 +#define TPS80031_TRANS_OFF_ACTIVE 0x10 +#define TPS80031_TRANS_OFF_MASK 0x30 + +#define TPS80031_EXT_PWR_REQ (TPS80031_PWR_REQ_INPUT_PREQ1 | \ + TPS80031_PWR_REQ_INPUT_PREQ2 | \ + TPS80031_PWR_REQ_INPUT_PREQ3) + +/* TPS80031_BBSPOR_CFG bit field */ +#define TPS80031_BBSPOR_CHG_EN 0x8 +#define TPS80031_MAX_REGISTER 0xFF + +struct i2c_client; + +/* Supported chips */ +enum chips { + TPS80031 = 0x00000001, + TPS80032 = 0x00000002, +}; + +enum { + TPS80031_INT_PWRON, + TPS80031_INT_RPWRON, + TPS80031_INT_SYS_VLOW, + TPS80031_INT_RTC_ALARM, + TPS80031_INT_RTC_PERIOD, + TPS80031_INT_HOT_DIE, + TPS80031_INT_VXX_SHORT, + TPS80031_INT_SPDURATION, + TPS80031_INT_WATCHDOG, + TPS80031_INT_BAT, + TPS80031_INT_SIM, + TPS80031_INT_MMC, + TPS80031_INT_RES, + TPS80031_INT_GPADC_RT, + TPS80031_INT_GPADC_SW2_EOC, + TPS80031_INT_CC_AUTOCAL, + TPS80031_INT_ID_WKUP, + TPS80031_INT_VBUSS_WKUP, + TPS80031_INT_ID, + TPS80031_INT_VBUS, + TPS80031_INT_CHRG_CTRL, + TPS80031_INT_EXT_CHRG, + TPS80031_INT_INT_CHRG, + TPS80031_INT_RES2, + TPS80031_INT_BAT_TEMP_OVRANGE, + TPS80031_INT_BAT_REMOVED, + TPS80031_INT_VBUS_DET, + TPS80031_INT_VAC_DET, + TPS80031_INT_FAULT_WDG, + TPS80031_INT_LINCH_GATED, + + /* Last interrupt id to get the end number */ + TPS80031_INT_NR, +}; + +/* TPS80031 Slave IDs */ +#define TPS80031_NUM_SLAVES 4 +#define TPS80031_SLAVE_ID0 0 +#define TPS80031_SLAVE_ID1 1 +#define TPS80031_SLAVE_ID2 2 +#define TPS80031_SLAVE_ID3 3 + +/* TPS80031 I2C addresses */ +#define TPS80031_I2C_ID0_ADDR 0x12 +#define TPS80031_I2C_ID1_ADDR 0x48 +#define TPS80031_I2C_ID2_ADDR 0x49 +#define TPS80031_I2C_ID3_ADDR 0x4A + +enum { + TPS80031_REGULATOR_VIO, + TPS80031_REGULATOR_SMPS1, + TPS80031_REGULATOR_SMPS2, + TPS80031_REGULATOR_SMPS3, + TPS80031_REGULATOR_SMPS4, + TPS80031_REGULATOR_VANA, + TPS80031_REGULATOR_LDO1, + TPS80031_REGULATOR_LDO2, + TPS80031_REGULATOR_LDO3, + TPS80031_REGULATOR_LDO4, + TPS80031_REGULATOR_LDO5, + TPS80031_REGULATOR_LDO6, + TPS80031_REGULATOR_LDO7, + TPS80031_REGULATOR_LDOLN, + TPS80031_REGULATOR_LDOUSB, + TPS80031_REGULATOR_VBUS, + TPS80031_REGULATOR_REGEN1, + TPS80031_REGULATOR_REGEN2, + TPS80031_REGULATOR_SYSEN, + TPS80031_REGULATOR_MAX, +}; + +/* Different configurations for the rails */ +enum { + /* USBLDO input selection */ + TPS80031_USBLDO_INPUT_VSYS = 0x00000001, + TPS80031_USBLDO_INPUT_PMID = 0x00000002, + + /* LDO3 output mode */ + TPS80031_LDO3_OUTPUT_VIB = 0x00000004, + + /* VBUS configuration */ + TPS80031_VBUS_DISCHRG_EN_PDN = 0x00000004, + TPS80031_VBUS_SW_ONLY = 0x00000008, + TPS80031_VBUS_SW_N_ID = 0x00000010, +}; + +/* External controls requests */ +enum tps80031_ext_control { + TPS80031_PWR_REQ_INPUT_NONE = 0x00000000, + TPS80031_PWR_REQ_INPUT_PREQ1 = 0x00000001, + TPS80031_PWR_REQ_INPUT_PREQ2 = 0x00000002, + TPS80031_PWR_REQ_INPUT_PREQ3 = 0x00000004, + TPS80031_PWR_OFF_ON_SLEEP = 0x00000008, + TPS80031_PWR_ON_ON_SLEEP = 0x00000010, +}; + +enum tps80031_pupd_pins { + TPS80031_PREQ1 = 0, + TPS80031_PREQ2A, + TPS80031_PREQ2B, + TPS80031_PREQ2C, + TPS80031_PREQ3, + TPS80031_NRES_WARM, + TPS80031_PWM_FORCE, + TPS80031_CHRG_EXT_CHRG_STATZ, + TPS80031_SIM, + TPS80031_MMC, + TPS80031_GPADC_START, + TPS80031_DVSI2C_SCL, + TPS80031_DVSI2C_SDA, + TPS80031_CTLI2C_SCL, + TPS80031_CTLI2C_SDA, +}; + +enum tps80031_pupd_settings { + TPS80031_PUPD_NORMAL, + TPS80031_PUPD_PULLDOWN, + TPS80031_PUPD_PULLUP, +}; + +struct tps80031 { + struct device *dev; + unsigned long chip_info; + int es_version; + struct i2c_client *clients[TPS80031_NUM_SLAVES]; + struct regmap *regmap[TPS80031_NUM_SLAVES]; + struct regmap_irq_chip_data *irq_data; +}; + +struct tps80031_pupd_init_data { + int input_pin; + int setting; +}; + +/* + * struct tps80031_regulator_platform_data - tps80031 regulator platform data. + * + * @reg_init_data: The regulator init data. + * @ext_ctrl_flag: External control flag for sleep/power request control. + * @config_flags: Configuration flag to configure the rails. + * It should be ORed of config enums. + */ + +struct tps80031_regulator_platform_data { + struct regulator_init_data *reg_init_data; + unsigned int ext_ctrl_flag; + unsigned int config_flags; +}; + +struct tps80031_platform_data { + int irq_base; + bool use_power_off; + struct tps80031_pupd_init_data *pupd_init_data; + int pupd_init_data_size; + struct tps80031_regulator_platform_data + *regulator_pdata[TPS80031_REGULATOR_MAX]; +}; + +static inline int tps80031_write(struct device *dev, int sid, + int reg, uint8_t val) +{ + struct tps80031 *tps80031 = dev_get_drvdata(dev); + + return regmap_write(tps80031->regmap[sid], reg, val); +} + +static inline int tps80031_writes(struct device *dev, int sid, int reg, + int len, uint8_t *val) +{ + struct tps80031 *tps80031 = dev_get_drvdata(dev); + + return regmap_bulk_write(tps80031->regmap[sid], reg, val, len); +} + +static inline int tps80031_read(struct device *dev, int sid, + int reg, uint8_t *val) +{ + struct tps80031 *tps80031 = dev_get_drvdata(dev); + unsigned int ival; + int ret; + + ret = regmap_read(tps80031->regmap[sid], reg, &ival); + if (ret < 0) { + dev_err(dev, "failed reading from reg 0x%02x\n", reg); + return ret; + } + + *val = ival; + return ret; +} + +static inline int tps80031_reads(struct device *dev, int sid, + int reg, int len, uint8_t *val) +{ + struct tps80031 *tps80031 = dev_get_drvdata(dev); + + return regmap_bulk_read(tps80031->regmap[sid], reg, val, len); +} + +static inline int tps80031_set_bits(struct device *dev, int sid, + int reg, uint8_t bit_mask) +{ + struct tps80031 *tps80031 = dev_get_drvdata(dev); + + return regmap_update_bits(tps80031->regmap[sid], reg, + bit_mask, bit_mask); +} + +static inline int tps80031_clr_bits(struct device *dev, int sid, + int reg, uint8_t bit_mask) +{ + struct tps80031 *tps80031 = dev_get_drvdata(dev); + + return regmap_update_bits(tps80031->regmap[sid], reg, bit_mask, 0); +} + +static inline int tps80031_update(struct device *dev, int sid, + int reg, uint8_t val, uint8_t mask) +{ + struct tps80031 *tps80031 = dev_get_drvdata(dev); + + return regmap_update_bits(tps80031->regmap[sid], reg, mask, val); +} + +static inline unsigned long tps80031_get_chip_info(struct device *dev) +{ + struct tps80031 *tps80031 = dev_get_drvdata(dev); + + return tps80031->chip_info; +} + +static inline int tps80031_get_pmu_version(struct device *dev) +{ + struct tps80031 *tps80031 = dev_get_drvdata(dev); + + return tps80031->es_version; +} + +static inline int tps80031_irq_get_virq(struct device *dev, int irq) +{ + struct tps80031 *tps80031 = dev_get_drvdata(dev); + + return regmap_irq_get_virq(tps80031->irq_data, irq); +} + +extern int tps80031_ext_power_req_config(struct device *dev, + unsigned long ext_ctrl_flag, int preq_bit, + int state_reg_add, int trans_reg_add); +#endif /*__LINUX_MFD_TPS80031_H */ diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h index a8eff4ad9be..94ac944d12f 100644 --- a/include/linux/mfd/twl6040.h +++ b/include/linux/mfd/twl6040.h @@ -207,10 +207,12 @@ struct twl6040_platform_data { }; struct regmap; +struct regmap_irq_chips_data; struct twl6040 { struct device *dev; struct regmap *regmap; + struct regmap_irq_chip_data *irq_data; struct regulator_bulk_data supplies[2]; /* supplies for vio, v2v1 */ struct mutex mutex; struct mutex irq_mutex; @@ -228,9 +230,8 @@ struct twl6040 { unsigned int mclk; unsigned int irq; - unsigned int irq_base; - u8 irq_masks_cur; - u8 irq_masks_cache; + unsigned int irq_ready; + unsigned int irq_th; }; int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg); @@ -245,8 +246,7 @@ int twl6040_set_pll(struct twl6040 *twl6040, int pll_id, unsigned int freq_in, unsigned int freq_out); int twl6040_get_pll(struct twl6040 *twl6040); unsigned int twl6040_get_sysclk(struct twl6040 *twl6040); -int twl6040_irq_init(struct twl6040 *twl6040); -void twl6040_irq_exit(struct twl6040 *twl6040); + /* Get the combined status of the vibra control register */ int twl6040_get_vibralr_status(struct twl6040 *twl6040); diff --git a/include/linux/mfd/viperboard.h b/include/linux/mfd/viperboard.h new file mode 100644 index 00000000000..193452848c0 --- /dev/null +++ b/include/linux/mfd/viperboard.h @@ -0,0 +1,110 @@ +/* + * include/linux/mfd/viperboard.h + * + * Nano River Technologies viperboard definitions + * + * (C) 2012 by Lemonage GmbH + * Author: Lars Poeschel <poeschel@lemonage.de> + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MFD_VIPERBOARD_H__ +#define __MFD_VIPERBOARD_H__ + +#include <linux/types.h> +#include <linux/usb.h> + +#define VPRBRD_EP_OUT 0x02 +#define VPRBRD_EP_IN 0x86 + +#define VPRBRD_I2C_MSG_LEN 512 /* max length of a msg on USB level */ + +#define VPRBRD_I2C_FREQ_6MHZ 1 /* 6 MBit/s */ +#define VPRBRD_I2C_FREQ_3MHZ 2 /* 3 MBit/s */ +#define VPRBRD_I2C_FREQ_1MHZ 3 /* 1 MBit/s */ +#define VPRBRD_I2C_FREQ_FAST 4 /* 400 kbit/s */ +#define VPRBRD_I2C_FREQ_400KHZ VPRBRD_I2C_FREQ_FAST +#define VPRBRD_I2C_FREQ_200KHZ 5 /* 200 kbit/s */ +#define VPRBRD_I2C_FREQ_STD 6 /* 100 kbit/s */ +#define VPRBRD_I2C_FREQ_100KHZ VPRBRD_I2C_FREQ_STD +#define VPRBRD_I2C_FREQ_10KHZ 7 /* 10 kbit/s */ + +#define VPRBRD_I2C_CMD_WRITE 0x00 +#define VPRBRD_I2C_CMD_READ 0x01 +#define VPRBRD_I2C_CMD_ADDR 0x02 + +#define VPRBRD_USB_TYPE_OUT 0x40 +#define VPRBRD_USB_TYPE_IN 0xc0 +#define VPRBRD_USB_TIMEOUT_MS 100 +#define VPRBRD_USB_REQUEST_I2C_FREQ 0xe6 +#define VPRBRD_USB_REQUEST_I2C 0xe9 +#define VPRBRD_USB_REQUEST_MAJOR 0xea +#define VPRBRD_USB_REQUEST_MINOR 0xeb +#define VPRBRD_USB_REQUEST_ADC 0xec +#define VPRBRD_USB_REQUEST_GPIOA 0xed +#define VPRBRD_USB_REQUEST_GPIOB 0xdd + +struct vprbrd_i2c_write_hdr { + u8 cmd; + u16 addr; + u8 len1; + u8 len2; + u8 last; + u8 chan; + u16 spi; +} __packed; + +struct vprbrd_i2c_read_hdr { + u8 cmd; + u16 addr; + u8 len0; + u8 len1; + u8 len2; + u8 len3; + u8 len4; + u8 len5; + u16 tf1; /* transfer 1 length */ + u16 tf2; /* transfer 2 length */ +} __packed; + +struct vprbrd_i2c_status { + u8 unknown[11]; + u8 status; +} __packed; + +struct vprbrd_i2c_write_msg { + struct vprbrd_i2c_write_hdr header; + u8 data[VPRBRD_I2C_MSG_LEN + - sizeof(struct vprbrd_i2c_write_hdr)]; +} __packed; + +struct vprbrd_i2c_read_msg { + struct vprbrd_i2c_read_hdr header; + u8 data[VPRBRD_I2C_MSG_LEN + - sizeof(struct vprbrd_i2c_read_hdr)]; +} __packed; + +struct vprbrd_i2c_addr_msg { + u8 cmd; + u8 addr; + u8 unknown1; + u16 len; + u8 unknown2; + u8 unknown3; +} __packed; + +/* Structure to hold all device specific stuff */ +struct vprbrd { + struct usb_device *usb_dev; /* the usb device for this device */ + struct mutex lock; + u8 buf[sizeof(struct vprbrd_i2c_write_msg)]; + struct platform_device pdev; +}; + +#endif /* __MFD_VIPERBOARD_H__ */ diff --git a/include/linux/mfd/wm8994/core.h b/include/linux/mfd/wm8994/core.h index 1f173306bf0..ae5c249530b 100644 --- a/include/linux/mfd/wm8994/core.h +++ b/include/linux/mfd/wm8994/core.h @@ -19,6 +19,8 @@ #include <linux/interrupt.h> #include <linux/regmap.h> +#include <linux/mfd/wm8994/pdata.h> + enum wm8994_type { WM8994 = 0, WM8958 = 1, @@ -55,6 +57,8 @@ struct regulator_bulk_data; struct wm8994 { struct mutex irq_lock; + struct wm8994_pdata pdata; + enum wm8994_type type; int revision; int cust_id; diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h index fc87be4fdc2..8e21a094836 100644 --- a/include/linux/mfd/wm8994/pdata.h +++ b/include/linux/mfd/wm8994/pdata.h @@ -176,6 +176,11 @@ struct wm8994_pdata { unsigned int lineout1fb:1; unsigned int lineout2fb:1; + /* Delay between detecting a jack and starting microphone + * detect (specified in ms) + */ + int micdet_delay; + /* IRQ for microphone detection if brought out directly as a * signal. */ |