diff options
Diffstat (limited to 'include/linux/mfd')
| -rw-r--r-- | include/linux/mfd/abx500/ab8500-bm.h | 1 | ||||
| -rw-r--r-- | include/linux/mfd/max77693-private.h | 108 | ||||
| -rw-r--r-- | include/linux/mfd/samsung/s2mps13.h | 2 | ||||
| -rw-r--r-- | include/linux/mfd/stmpe.h | 38 | ||||
| -rw-r--r-- | include/linux/mfd/syscon/atmel-matrix.h | 117 | ||||
| -rw-r--r-- | include/linux/mfd/syscon/atmel-smc.h | 173 | ||||
| -rw-r--r-- | include/linux/mfd/syscon/exynos4-pmu.h | 21 | ||||
| -rw-r--r-- | include/linux/mfd/tc3589x.h | 12 | ||||
| -rw-r--r-- | include/linux/mfd/ti_am335x_tscadc.h | 3 | ||||
| -rw-r--r-- | include/linux/mfd/tmio.h | 28 |
10 files changed, 427 insertions, 76 deletions
diff --git a/include/linux/mfd/abx500/ab8500-bm.h b/include/linux/mfd/abx500/ab8500-bm.h index cc892a8d8d6..12a5b396921 100644 --- a/include/linux/mfd/abx500/ab8500-bm.h +++ b/include/linux/mfd/abx500/ab8500-bm.h @@ -461,7 +461,6 @@ struct ab8500_fg; #ifdef CONFIG_AB8500_BM extern struct abx500_bm_data ab8500_bm_data; -void ab8500_fg_reinit(void); void ab8500_charger_usb_state_changed(u8 bm_usb_state, u16 mA); struct ab8500_btemp *ab8500_btemp_get(void); int ab8500_btemp_get_batctrl_temp(struct ab8500_btemp *btemp); diff --git a/include/linux/mfd/max77693-private.h b/include/linux/mfd/max77693-private.h index 08dae01258b..955dd990bea 100644 --- a/include/linux/mfd/max77693-private.h +++ b/include/linux/mfd/max77693-private.h @@ -143,10 +143,118 @@ enum max77693_pmic_reg { #define FLASH_INT_FLED1_SHORT BIT(3) #define FLASH_INT_OVER_CURRENT BIT(4) +/* Fast charge timer in in hours */ +#define DEFAULT_FAST_CHARGE_TIMER 4 +/* microamps */ +#define DEFAULT_TOP_OFF_THRESHOLD_CURRENT 150000 +/* minutes */ +#define DEFAULT_TOP_OFF_TIMER 30 +/* microvolts */ +#define DEFAULT_CONSTANT_VOLT 4200000 +/* microvolts */ +#define DEFAULT_MIN_SYSTEM_VOLT 3600000 +/* celsius */ +#define DEFAULT_THERMAL_REGULATION_TEMP 100 +/* microamps */ +#define DEFAULT_BATTERY_OVERCURRENT 3500000 +/* microvolts */ +#define DEFAULT_CHARGER_INPUT_THRESHOLD_VOLT 4300000 + +/* MAX77693_CHG_REG_CHG_INT_OK register */ +#define CHG_INT_OK_BYP_SHIFT 0 +#define CHG_INT_OK_BAT_SHIFT 3 +#define CHG_INT_OK_CHG_SHIFT 4 +#define CHG_INT_OK_CHGIN_SHIFT 6 +#define CHG_INT_OK_DETBAT_SHIFT 7 +#define CHG_INT_OK_BYP_MASK BIT(CHG_INT_OK_BYP_SHIFT) +#define CHG_INT_OK_BAT_MASK BIT(CHG_INT_OK_BAT_SHIFT) +#define CHG_INT_OK_CHG_MASK BIT(CHG_INT_OK_CHG_SHIFT) +#define CHG_INT_OK_CHGIN_MASK BIT(CHG_INT_OK_CHGIN_SHIFT) +#define CHG_INT_OK_DETBAT_MASK BIT(CHG_INT_OK_DETBAT_SHIFT) + +/* MAX77693_CHG_REG_CHG_DETAILS_00 register */ +#define CHG_DETAILS_00_CHGIN_SHIFT 5 +#define CHG_DETAILS_00_CHGIN_MASK (0x3 << CHG_DETAILS_00_CHGIN_SHIFT) + +/* MAX77693_CHG_REG_CHG_DETAILS_01 register */ +#define CHG_DETAILS_01_CHG_SHIFT 0 +#define CHG_DETAILS_01_BAT_SHIFT 4 +#define CHG_DETAILS_01_TREG_SHIFT 7 +#define CHG_DETAILS_01_CHG_MASK (0xf << CHG_DETAILS_01_CHG_SHIFT) +#define CHG_DETAILS_01_BAT_MASK (0x7 << CHG_DETAILS_01_BAT_SHIFT) +#define CHG_DETAILS_01_TREG_MASK BIT(7) + +/* MAX77693_CHG_REG_CHG_DETAILS_01/CHG field */ +enum max77693_charger_charging_state { + MAX77693_CHARGING_PREQUALIFICATION = 0x0, + MAX77693_CHARGING_FAST_CONST_CURRENT, + MAX77693_CHARGING_FAST_CONST_VOLTAGE, + MAX77693_CHARGING_TOP_OFF, + MAX77693_CHARGING_DONE, + MAX77693_CHARGING_HIGH_TEMP, + MAX77693_CHARGING_TIMER_EXPIRED, + MAX77693_CHARGING_THERMISTOR_SUSPEND, + MAX77693_CHARGING_OFF, + MAX77693_CHARGING_RESERVED, + MAX77693_CHARGING_OVER_TEMP, + MAX77693_CHARGING_WATCHDOG_EXPIRED, +}; + +/* MAX77693_CHG_REG_CHG_DETAILS_01/BAT field */ +enum max77693_charger_battery_state { + MAX77693_BATTERY_NOBAT = 0x0, + /* Dead-battery or low-battery prequalification */ + MAX77693_BATTERY_PREQUALIFICATION, + MAX77693_BATTERY_TIMER_EXPIRED, + MAX77693_BATTERY_GOOD, + MAX77693_BATTERY_LOWVOLTAGE, + MAX77693_BATTERY_OVERVOLTAGE, + MAX77693_BATTERY_OVERCURRENT, + MAX77693_BATTERY_RESERVED, +}; + +/* MAX77693_CHG_REG_CHG_DETAILS_02 register */ +#define CHG_DETAILS_02_BYP_SHIFT 0 +#define CHG_DETAILS_02_BYP_MASK (0xf << CHG_DETAILS_02_BYP_SHIFT) + /* MAX77693 CHG_CNFG_00 register */ #define CHG_CNFG_00_CHG_MASK 0x1 #define CHG_CNFG_00_BUCK_MASK 0x4 +/* MAX77693_CHG_REG_CHG_CNFG_01 register */ +#define CHG_CNFG_01_FCHGTIME_SHIFT 0 +#define CHG_CNFG_01_CHGRSTRT_SHIFT 4 +#define CHG_CNFG_01_PQEN_SHIFT 7 +#define CHG_CNFG_01_FCHGTIME_MASK (0x7 << CHG_CNFG_01_FCHGTIME_SHIFT) +#define CHG_CNFG_01_CHGRSTRT_MASK (0x3 << CHG_CNFG_01_CHGRSTRT_SHIFT) +#define CHG_CNFG_01_PQEN_MAKS BIT(CHG_CNFG_01_PQEN_SHIFT) + +/* MAX77693_CHG_REG_CHG_CNFG_03 register */ +#define CHG_CNFG_03_TOITH_SHIFT 0 +#define CHG_CNFG_03_TOTIME_SHIFT 3 +#define CHG_CNFG_03_TOITH_MASK (0x7 << CHG_CNFG_03_TOITH_SHIFT) +#define CHG_CNFG_03_TOTIME_MASK (0x7 << CHG_CNFG_03_TOTIME_SHIFT) + +/* MAX77693_CHG_REG_CHG_CNFG_04 register */ +#define CHG_CNFG_04_CHGCVPRM_SHIFT 0 +#define CHG_CNFG_04_MINVSYS_SHIFT 5 +#define CHG_CNFG_04_CHGCVPRM_MASK (0x1f << CHG_CNFG_04_CHGCVPRM_SHIFT) +#define CHG_CNFG_04_MINVSYS_MASK (0x7 << CHG_CNFG_04_MINVSYS_SHIFT) + +/* MAX77693_CHG_REG_CHG_CNFG_06 register */ +#define CHG_CNFG_06_CHGPROT_SHIFT 2 +#define CHG_CNFG_06_CHGPROT_MASK (0x3 << CHG_CNFG_06_CHGPROT_SHIFT) + +/* MAX77693_CHG_REG_CHG_CNFG_07 register */ +#define CHG_CNFG_07_REGTEMP_SHIFT 5 +#define CHG_CNFG_07_REGTEMP_MASK (0x3 << CHG_CNFG_07_REGTEMP_SHIFT) + +/* MAX77693_CHG_REG_CHG_CNFG_12 register */ +#define CHG_CNFG_12_B2SOVRC_SHIFT 0 +#define CHG_CNFG_12_VCHGINREG_SHIFT 3 +#define CHG_CNFG_12_B2SOVRC_MASK (0x7 << CHG_CNFG_12_B2SOVRC_SHIFT) +#define CHG_CNFG_12_VCHGINREG_MASK (0x3 << CHG_CNFG_12_VCHGINREG_SHIFT) + /* MAX77693 CHG_CNFG_09 Register */ #define CHG_CNFG_09_CHGIN_ILIM_MASK 0x7F diff --git a/include/linux/mfd/samsung/s2mps13.h b/include/linux/mfd/samsung/s2mps13.h index ce5dda8958f..b1fd675fa36 100644 --- a/include/linux/mfd/samsung/s2mps13.h +++ b/include/linux/mfd/samsung/s2mps13.h @@ -59,6 +59,7 @@ enum s2mps13_reg { S2MPS13_REG_B6CTRL, S2MPS13_REG_B6OUT, S2MPS13_REG_B7CTRL, + S2MPS13_REG_B7SW, S2MPS13_REG_B7OUT, S2MPS13_REG_B8CTRL, S2MPS13_REG_B8OUT, @@ -102,6 +103,7 @@ enum s2mps13_reg { S2MPS13_REG_L26CTRL, S2MPS13_REG_L27CTRL, S2MPS13_REG_L28CTRL, + S2MPS13_REG_L29CTRL, S2MPS13_REG_L30CTRL, S2MPS13_REG_L31CTRL, S2MPS13_REG_L32CTRL, diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h index 575a86c7fcb..c9d86902730 100644 --- a/include/linux/mfd/stmpe.h +++ b/include/linux/mfd/stmpe.h @@ -50,6 +50,8 @@ enum { STMPE_IDX_GPEDR_MSB, STMPE_IDX_GPRER_LSB, STMPE_IDX_GPFER_LSB, + STMPE_IDX_GPPUR_LSB, + STMPE_IDX_GPPDR_LSB, STMPE_IDX_GPAFR_U_MSB, STMPE_IDX_IEGPIOR_LSB, STMPE_IDX_ISGPIOR_LSB, @@ -113,41 +115,9 @@ extern int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins, extern int stmpe_enable(struct stmpe *stmpe, unsigned int blocks); extern int stmpe_disable(struct stmpe *stmpe, unsigned int blocks); -struct matrix_keymap_data; - -/** - * struct stmpe_keypad_platform_data - STMPE keypad platform data - * @keymap_data: key map table and size - * @debounce_ms: debounce interval, in ms. Maximum is - * %STMPE_KEYPAD_MAX_DEBOUNCE. - * @scan_count: number of key scanning cycles to confirm key data. - * Maximum is %STMPE_KEYPAD_MAX_SCAN_COUNT. - * @no_autorepeat: disable key autorepeat - */ -struct stmpe_keypad_platform_data { - const struct matrix_keymap_data *keymap_data; - unsigned int debounce_ms; - unsigned int scan_count; - bool no_autorepeat; -}; - #define STMPE_GPIO_NOREQ_811_TOUCH (0xf0) /** - * struct stmpe_gpio_platform_data - STMPE GPIO platform data - * @norequest_mask: bitmask specifying which GPIOs should _not_ be - * requestable due to different usage (e.g. touch, keypad) - * STMPE_GPIO_NOREQ_* macros can be used here. - * @setup: board specific setup callback. - * @remove: board specific remove callback - */ -struct stmpe_gpio_platform_data { - unsigned norequest_mask; - void (*setup)(struct stmpe *stmpe, unsigned gpio_base); - void (*remove)(struct stmpe *stmpe, unsigned gpio_base); -}; - -/** * struct stmpe_ts_platform_data - stmpe811 touch screen controller platform * data * @sample_time: ADC converstion time in number of clock. @@ -198,8 +168,6 @@ struct stmpe_ts_platform_data { * @irq_over_gpio: true if gpio is used to get irq * @irq_gpio: gpio number over which irq will be requested (significant only if * irq_over_gpio is true) - * @gpio: GPIO-specific platform data - * @keypad: keypad-specific platform data * @ts: touchscreen-specific platform data */ struct stmpe_platform_data { @@ -211,8 +179,6 @@ struct stmpe_platform_data { int irq_gpio; int autosleep_timeout; - struct stmpe_gpio_platform_data *gpio; - struct stmpe_keypad_platform_data *keypad; struct stmpe_ts_platform_data *ts; }; diff --git a/include/linux/mfd/syscon/atmel-matrix.h b/include/linux/mfd/syscon/atmel-matrix.h new file mode 100644 index 00000000000..8293c3e2a82 --- /dev/null +++ b/include/linux/mfd/syscon/atmel-matrix.h @@ -0,0 +1,117 @@ +/* + * Copyright (C) 2014 Atmel Corporation. + * + * Memory Controllers (MATRIX, EBI) - System peripherals registers. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _LINUX_MFD_SYSCON_ATMEL_MATRIX_H +#define _LINUX_MFD_SYSCON_ATMEL_MATRIX_H + +#define AT91SAM9260_MATRIX_MCFG 0x00 +#define AT91SAM9260_MATRIX_SCFG 0x40 +#define AT91SAM9260_MATRIX_PRS 0x80 +#define AT91SAM9260_MATRIX_MRCR 0x100 +#define AT91SAM9260_MATRIX_EBICSA 0x11c + +#define AT91SAM9261_MATRIX_MRCR 0x0 +#define AT91SAM9261_MATRIX_SCFG 0x4 +#define AT91SAM9261_MATRIX_TCR 0x24 +#define AT91SAM9261_MATRIX_EBICSA 0x30 +#define AT91SAM9261_MATRIX_USBPUCR 0x34 + +#define AT91SAM9263_MATRIX_MCFG 0x00 +#define AT91SAM9263_MATRIX_SCFG 0x40 +#define AT91SAM9263_MATRIX_PRS 0x80 +#define AT91SAM9263_MATRIX_MRCR 0x100 +#define AT91SAM9263_MATRIX_TCR 0x114 +#define AT91SAM9263_MATRIX_EBI0CSA 0x120 +#define AT91SAM9263_MATRIX_EBI1CSA 0x124 + +#define AT91SAM9RL_MATRIX_MCFG 0x00 +#define AT91SAM9RL_MATRIX_SCFG 0x40 +#define AT91SAM9RL_MATRIX_PRS 0x80 +#define AT91SAM9RL_MATRIX_MRCR 0x100 +#define AT91SAM9RL_MATRIX_TCR 0x114 +#define AT91SAM9RL_MATRIX_EBICSA 0x120 + +#define AT91SAM9G45_MATRIX_MCFG 0x00 +#define AT91SAM9G45_MATRIX_SCFG 0x40 +#define AT91SAM9G45_MATRIX_PRS 0x80 +#define AT91SAM9G45_MATRIX_MRCR 0x100 +#define AT91SAM9G45_MATRIX_TCR 0x110 +#define AT91SAM9G45_MATRIX_DDRMPR 0x118 +#define AT91SAM9G45_MATRIX_EBICSA 0x128 + +#define AT91SAM9N12_MATRIX_MCFG 0x00 +#define AT91SAM9N12_MATRIX_SCFG 0x40 +#define AT91SAM9N12_MATRIX_PRS 0x80 +#define AT91SAM9N12_MATRIX_MRCR 0x100 +#define AT91SAM9N12_MATRIX_EBICSA 0x118 + +#define AT91SAM9X5_MATRIX_MCFG 0x00 +#define AT91SAM9X5_MATRIX_SCFG 0x40 +#define AT91SAM9X5_MATRIX_PRS 0x80 +#define AT91SAM9X5_MATRIX_MRCR 0x100 +#define AT91SAM9X5_MATRIX_EBICSA 0x120 + +#define SAMA5D3_MATRIX_MCFG 0x00 +#define SAMA5D3_MATRIX_SCFG 0x40 +#define SAMA5D3_MATRIX_PRS 0x80 +#define SAMA5D3_MATRIX_MRCR 0x100 + +#define AT91_MATRIX_MCFG(o, x) ((o) + ((x) * 0x4)) +#define AT91_MATRIX_ULBT GENMASK(2, 0) +#define AT91_MATRIX_ULBT_INFINITE (0 << 0) +#define AT91_MATRIX_ULBT_SINGLE (1 << 0) +#define AT91_MATRIX_ULBT_FOUR (2 << 0) +#define AT91_MATRIX_ULBT_EIGHT (3 << 0) +#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) + +#define AT91_MATRIX_SCFG(o, x) ((o) + ((x) * 0x4)) +#define AT91_MATRIX_SLOT_CYCLE GENMASK(7, 0) +#define AT91_MATRIX_DEFMSTR_TYPE GENMASK(17, 16) +#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) +#define AT91_MATRIX_FIXED_DEFMSTR GENMASK(20, 18) +#define AT91_MATRIX_ARBT GENMASK(25, 24) +#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) +#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) + +#define AT91_MATRIX_ITCM_SIZE GENMASK(3, 0) +#define AT91_MATRIX_ITCM_0 (0 << 0) +#define AT91_MATRIX_ITCM_16 (5 << 0) +#define AT91_MATRIX_ITCM_32 (6 << 0) +#define AT91_MATRIX_ITCM_64 (7 << 0) +#define AT91_MATRIX_DTCM_SIZE GENMASK(7, 4) +#define AT91_MATRIX_DTCM_0 (0 << 4) +#define AT91_MATRIX_DTCM_16 (5 << 4) +#define AT91_MATRIX_DTCM_32 (6 << 4) +#define AT91_MATRIX_DTCM_64 (7 << 4) + +#define AT91_MATRIX_PRAS(o, x) ((o) + ((x) * 0x8)) +#define AT91_MATRIX_PRBS(o, x) ((o) + ((x) * 0x8) + 0x4) +#define AT91_MATRIX_MPR(x) GENMASK(((x) * 0x4) + 1, ((x) * 0x4)) + +#define AT91_MATRIX_RCB(x) BIT(x) + +#define AT91_MATRIX_CSA(cs, val) (val << (cs)) +#define AT91_MATRIX_DBPUC BIT(8) +#define AT91_MATRIX_DBPDC BIT(9) +#define AT91_MATRIX_VDDIOMSEL BIT(16) +#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16) +#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16) +#define AT91_MATRIX_EBI_IOSR BIT(17) +#define AT91_MATRIX_DDR_IOSR BIT(18) +#define AT91_MATRIX_NFD0_SELECT BIT(24) +#define AT91_MATRIX_DDR_MP_EN BIT(25) +#define AT91_MATRIX_EBI_NUM_CS 8 + +#define AT91_MATRIX_USBPUCR_PUON BIT(30) + +#endif /* _LINUX_MFD_SYSCON_ATMEL_MATRIX_H */ diff --git a/include/linux/mfd/syscon/atmel-smc.h b/include/linux/mfd/syscon/atmel-smc.h new file mode 100644 index 00000000000..be6ebe64eeb --- /dev/null +++ b/include/linux/mfd/syscon/atmel-smc.h @@ -0,0 +1,173 @@ +/* + * Atmel SMC (Static Memory Controller) register offsets and bit definitions. + * + * Copyright (C) 2014 Atmel + * Copyright (C) 2014 Free Electrons + * + * Author: Boris Brezillon <boris.brezillon@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _LINUX_MFD_SYSCON_ATMEL_SMC_H_ +#define _LINUX_MFD_SYSCON_ATMEL_SMC_H_ + +#include <linux/kernel.h> +#include <linux/regmap.h> + +#define AT91SAM9_SMC_GENERIC 0x00 +#define AT91SAM9_SMC_GENERIC_BLK_SZ 0x10 + +#define SAMA5_SMC_GENERIC 0x600 +#define SAMA5_SMC_GENERIC_BLK_SZ 0x14 + +#define AT91SAM9_SMC_SETUP(o) ((o) + 0x00) +#define AT91SAM9_SMC_NWESETUP(x) (x) +#define AT91SAM9_SMC_NCS_WRSETUP(x) ((x) << 8) +#define AT91SAM9_SMC_NRDSETUP(x) ((x) << 16) +#define AT91SAM9_SMC_NCS_NRDSETUP(x) ((x) << 24) + +#define AT91SAM9_SMC_PULSE(o) ((o) + 0x04) +#define AT91SAM9_SMC_NWEPULSE(x) (x) +#define AT91SAM9_SMC_NCS_WRPULSE(x) ((x) << 8) +#define AT91SAM9_SMC_NRDPULSE(x) ((x) << 16) +#define AT91SAM9_SMC_NCS_NRDPULSE(x) ((x) << 24) + +#define AT91SAM9_SMC_CYCLE(o) ((o) + 0x08) +#define AT91SAM9_SMC_NWECYCLE(x) (x) +#define AT91SAM9_SMC_NRDCYCLE(x) ((x) << 16) + +#define AT91SAM9_SMC_MODE(o) ((o) + 0x0c) +#define SAMA5_SMC_MODE(o) ((o) + 0x10) +#define AT91_SMC_READMODE BIT(0) +#define AT91_SMC_READMODE_NCS (0 << 0) +#define AT91_SMC_READMODE_NRD (1 << 0) +#define AT91_SMC_WRITEMODE BIT(1) +#define AT91_SMC_WRITEMODE_NCS (0 << 1) +#define AT91_SMC_WRITEMODE_NWE (1 << 1) +#define AT91_SMC_EXNWMODE GENMASK(5, 4) +#define AT91_SMC_EXNWMODE_DISABLE (0 << 4) +#define AT91_SMC_EXNWMODE_FROZEN (2 << 4) +#define AT91_SMC_EXNWMODE_READY (3 << 4) +#define AT91_SMC_BAT BIT(8) +#define AT91_SMC_BAT_SELECT (0 << 8) +#define AT91_SMC_BAT_WRITE (1 << 8) +#define AT91_SMC_DBW GENMASK(13, 12) +#define AT91_SMC_DBW_8 (0 << 12) +#define AT91_SMC_DBW_16 (1 << 12) +#define AT91_SMC_DBW_32 (2 << 12) +#define AT91_SMC_TDF GENMASK(19, 16) +#define AT91_SMC_TDF_(x) ((((x) - 1) << 16) & AT91_SMC_TDF) +#define AT91_SMC_TDF_MAX 16 +#define AT91_SMC_TDFMODE_OPTIMIZED BIT(20) +#define AT91_SMC_PMEN BIT(24) +#define AT91_SMC_PS GENMASK(29, 28) +#define AT91_SMC_PS_4 (0 << 28) +#define AT91_SMC_PS_8 (1 << 28) +#define AT91_SMC_PS_16 (2 << 28) +#define AT91_SMC_PS_32 (3 << 28) + + +/* + * This function converts a setup timing expressed in nanoseconds into an + * encoded value that can be written in the SMC_SETUP register. + * + * The following formula is described in atmel datasheets (section + * "SMC Setup Register"): + * + * setup length = (128* SETUP[5] + SETUP[4:0]) + * + * where setup length is the timing expressed in cycles. + */ +static inline u32 at91sam9_smc_setup_ns_to_cycles(unsigned int clk_rate, + u32 timing_ns) +{ + u32 clk_period = DIV_ROUND_UP(NSEC_PER_SEC, clk_rate); + u32 coded_cycles = 0; + u32 cycles; + + cycles = DIV_ROUND_UP(timing_ns, clk_period); + if (cycles / 32) { + coded_cycles |= 1 << 5; + if (cycles < 128) + cycles = 0; + } + + coded_cycles |= cycles % 32; + + return coded_cycles; +} + +/* + * This function converts a pulse timing expressed in nanoseconds into an + * encoded value that can be written in the SMC_PULSE register. + * + * The following formula is described in atmel datasheets (section + * "SMC Pulse Register"): + * + * pulse length = (256* PULSE[6] + PULSE[5:0]) + * + * where pulse length is the timing expressed in cycles. + */ +static inline u32 at91sam9_smc_pulse_ns_to_cycles(unsigned int clk_rate, + u32 timing_ns) +{ + u32 clk_period = DIV_ROUND_UP(NSEC_PER_SEC, clk_rate); + u32 coded_cycles = 0; + u32 cycles; + + cycles = DIV_ROUND_UP(timing_ns, clk_period); + if (cycles / 64) { + coded_cycles |= 1 << 6; + if (cycles < 256) + cycles = 0; + } + + coded_cycles |= cycles % 64; + + return coded_cycles; +} + +/* + * This function converts a cycle timing expressed in nanoseconds into an + * encoded value that can be written in the SMC_CYCLE register. + * + * The following formula is described in atmel datasheets (section + * "SMC Cycle Register"): + * + * cycle length = (CYCLE[8:7]*256 + CYCLE[6:0]) + * + * where cycle length is the timing expressed in cycles. + */ +static inline u32 at91sam9_smc_cycle_ns_to_cycles(unsigned int clk_rate, + u32 timing_ns) +{ + u32 clk_period = DIV_ROUND_UP(NSEC_PER_SEC, clk_rate); + u32 coded_cycles = 0; + u32 cycles; + + cycles = DIV_ROUND_UP(timing_ns, clk_period); + if (cycles / 128) { + coded_cycles = cycles / 256; + cycles %= 256; + if (cycles >= 128) { + coded_cycles++; + cycles = 0; + } + + if (coded_cycles > 0x3) { + coded_cycles = 0x3; + cycles = 0x7f; + } + + coded_cycles <<= 7; + } + + coded_cycles |= cycles % 128; + + return coded_cycles; +} + +#endif /* _LINUX_MFD_SYSCON_ATMEL_SMC_H_ */ diff --git a/include/linux/mfd/syscon/exynos4-pmu.h b/include/linux/mfd/syscon/exynos4-pmu.h new file mode 100644 index 00000000000..278b1b1549e --- /dev/null +++ b/include/linux/mfd/syscon/exynos4-pmu.h @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2015 Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _LINUX_MFD_SYSCON_PMU_EXYNOS4_H_ +#define _LINUX_MFD_SYSCON_PMU_EXYNOS4_H_ + +/* Exynos4 PMU register definitions */ + +/* MIPI_PHYn_CONTROL register offset: n = 0..1 */ +#define EXYNOS4_MIPI_PHY_CONTROL(n) (0x710 + (n) * 4) +#define EXYNOS4_MIPI_PHY_ENABLE (1 << 0) +#define EXYNOS4_MIPI_PHY_SRESETN (1 << 1) +#define EXYNOS4_MIPI_PHY_MRESETN (1 << 2) +#define EXYNOS4_MIPI_PHY_RESET_MASK (3 << 1) + +#endif /* _LINUX_MFD_SYSCON_PMU_EXYNOS4_H_ */ diff --git a/include/linux/mfd/tc3589x.h b/include/linux/mfd/tc3589x.h index e1c12d84c26..c203c9c5677 100644 --- a/include/linux/mfd/tc3589x.h +++ b/include/linux/mfd/tc3589x.h @@ -163,24 +163,12 @@ struct tc3589x_keypad_platform_data { }; /** - * struct tc3589x_gpio_platform_data - TC3589x GPIO platform data - * @setup: callback for board-specific initialization - * @remove: callback for board-specific teardown - */ -struct tc3589x_gpio_platform_data { - void (*setup)(struct tc3589x *tc3589x, unsigned gpio_base); - void (*remove)(struct tc3589x *tc3589x, unsigned gpio_base); -}; - -/** * struct tc3589x_platform_data - TC3589x platform data * @block: bitmask of blocks to enable (use TC3589x_BLOCK_*) - * @gpio: GPIO-specific platform data * @keypad: keypad-specific platform data */ struct tc3589x_platform_data { unsigned int block; - struct tc3589x_gpio_platform_data *gpio; const struct tc3589x_keypad_platform_data *keypad; }; diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h index e2e70053470..3f4e994ace2 100644 --- a/include/linux/mfd/ti_am335x_tscadc.h +++ b/include/linux/mfd/ti_am335x_tscadc.h @@ -52,6 +52,7 @@ /* IRQ enable */ #define IRQENB_HW_PEN BIT(0) +#define IRQENB_EOS BIT(1) #define IRQENB_FIFO0THRES BIT(2) #define IRQENB_FIFO0OVRRUN BIT(3) #define IRQENB_FIFO0UNDRFLW BIT(4) @@ -107,7 +108,7 @@ /* Charge delay */ #define CHARGEDLY_OPEN_MASK (0x3FFFF << 0) #define CHARGEDLY_OPEN(val) ((val) << 0) -#define CHARGEDLY_OPENDLY CHARGEDLY_OPEN(1) +#define CHARGEDLY_OPENDLY CHARGEDLY_OPEN(0x400) /* Control register */ #define CNTRLREG_TSCSSENB BIT(0) diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index 57388171610..605812820e4 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -96,11 +96,6 @@ #define TMIO_MMC_SDIO_STATUS_QUIRK (1 << 8) /* - * Some controllers have DMA enable/disable register - */ -#define TMIO_MMC_HAVE_CTL_DMA_REG (1 << 9) - -/* * Some controllers allows to set SDx actual clock */ #define TMIO_MMC_CLK_ACTUAL (1 << 10) @@ -112,18 +107,6 @@ void tmio_core_mmc_clk_div(void __iomem *cnf, int shift, int state); struct dma_chan; -struct tmio_mmc_dma { - void *chan_priv_tx; - void *chan_priv_rx; - int slave_id_tx; - int slave_id_rx; - int alignment_shift; - dma_addr_t dma_rx_offset; - bool (*filter)(struct dma_chan *chan, void *arg); -}; - -struct tmio_mmc_host; - /* * data for the MMC controller */ @@ -132,19 +115,12 @@ struct tmio_mmc_data { unsigned long capabilities; unsigned long capabilities2; unsigned long flags; - unsigned long bus_shift; u32 ocr_mask; /* available voltages */ - struct tmio_mmc_dma *dma; - struct device *dev; unsigned int cd_gpio; + int alignment_shift; + dma_addr_t dma_rx_offset; void (*set_pwr)(struct platform_device *host, int state); void (*set_clk_div)(struct platform_device *host, int state); - int (*write16_hook)(struct tmio_mmc_host *host, int addr); - /* clock management callbacks */ - int (*clk_enable)(struct platform_device *pdev, unsigned int *f); - void (*clk_disable)(struct platform_device *pdev); - int (*multi_io_quirk)(struct mmc_card *card, - unsigned int direction, int blk_size); }; /* |